2902 commits

Author	SHA1	Message	Date
Ian Martin	ee05810904	Changes suggested by @bthebaudeau.	2014-04-18 10:29:47 -04:00
George Oikonomou	49bf7cc241	Merge pull request #616 from hexluthor/listing ... CC2538: Add a Makefile rule to generate a final assembly listing.	2014-04-17 22:13:52 +01:00
Benoît Thébaudeau	d93d129da6	cc2538: uart: Make it possible to use several UARTs simultaneously ... This avoids the limitation of having a single UART available at runtime, without duplicating code. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2014-04-17 18:53:44 +02:00
Ian Martin	2cf730a1c6	Un-indent preprocessor directives.	2014-04-17 10:39:00 -04:00
Ian Martin	23a3a7f004	Add a note about "make cc2538-demo.lst" to the platform README.	2014-04-16 10:47:01 -04:00
Ian Martin	16936d864c	Rename FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PIN to FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN.	2014-04-16 10:19:37 -04:00
Ian Martin	1a63c47cf9	CC2538: Add CONF parameters to select boot loader backdoor pin and logic level.	2014-04-15 17:36:55 -04:00
Brad Campbell	af27d2d252	[CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS ... Because the CC2538 has a multi-byte SPI RX FIFO, flushing the buffer requires more than just a single read. This adds a loop that empties the entire RX buffer on a FLUSH(). Different SPI chips needs different SPI settings. This commit adds a function that allows chip drivers to configure the SPI peripheral before using it. The frame pin the driver was using as a chip select does not work as most devices expect it to. It toggles after every byte, and most chips interpret that as end of message. To make drivers more reliable, each chip driver should setup a GPIO and assert it as needed.	2014-04-15 14:07:10 -04:00
George Oikonomou	33abe26ec8	Merge pull request #411 from ADVANSEE/cc2538-adc ... cc2538: Add adc driver and example	2014-04-13 03:05:12 +01:00
George Oikonomou	22554e6d72	Merge pull request #596 from hexluthor/cc2538-uart-baudrate ... cc2538: Support any UART baudrate.	2014-04-13 02:51:58 +01:00
Niclas Finne	fc6814a104	Added stub for extended radio API for seedeye	2014-04-03 13:38:31 +02:00
Niclas Finne	b8a23564a3	Added stub for extended radio API for Cooja	2014-04-03 13:38:29 +02:00
Niclas Finne	b13b5fc9ac	Fixed typo to correctly print the radio channel at startup	2014-03-28 11:54:12 +01:00
Ian Martin	336224633a	Eliminate UART_CONF_IBRD and UART_CONF_FBRD.	2014-03-22 10:26:03 -04:00
François Revol	726bdd699a	native: Add CTK to the module list ... It is needed for apps compiled WITH_GUI.	2014-03-21 23:01:02 +01:00
Nicolas Tsiftes	b78eb96a54	Merge pull request #590 from g-oikonomou/native-rpl-module ... Include the RPL module for the native platform	2014-03-18 12:32:56 +01:00
Oliver Schmidt	d1d6278f42	Added info on W5100 driver.	2014-03-15 16:56:08 +01:00
George Oikonomou	4704eeb919	Include the RPL module for the native platform	2014-03-09 03:29:43 +00:00
George Oikonomou	6dc9dfa6c2	Merge pull request #551 from JelmerT/feature-cc2538-bsl ... CC2538 serial boot loader python script	2014-03-09 02:11:36 +00:00
Jelmer Tiete	34e48f4233	Added bootloader backdoor configuration for cc2538DK in contiki-conf.h and selector in startup-gcc.c. Updated Makefile.cc2538dk to support direct uploading. Also updated the platform readme to include the workflow with cc2538-bsl.	2014-03-07 15:44:08 +01:00
Brad Campbell	d14f0d5eed	CC2538: add secondary location to ieee address ... The CC2538 currently has two addressing options: a hardcoded address set at compile time or the address stored in primary address section of the info page. This commit adds the option to choose the secondary location of the ieee address from the info page, or any memory address. To use, define `IEEE_ADDR_CONF_USE_SECONDARY_LOCATION` in `project-conf.h` or similar. For example: #define IEEE_ADDR_CONF_USE_SECONDARY_LOCATION 1	2014-03-06 10:31:30 -05:00
Oliver Schmidt	a1cd642e6e	Merge pull request #554 from oliverschmidt/master ... Fixed win32 broken by recent changes.	2014-02-02 12:10:57 -08:00
Oliver Schmidt	71c671b6cf	Fixed win32 broken by recent changes.	2014-02-02 20:19:47 +01:00
George Oikonomou	a63376f8be	Use -Os for CC2538 builds ... As discussed in #503, -Os was broken with one of the toolchains recommended in the platform's README and for that reason we were using -O2 by default. This commit sets the default to -Os and updates the README to no longer recommend the toolchain in question	2014-01-31 20:02:43 +00:00
Adam Dunkels	45265249fc	Changed the name of the rimeaddr module to linkaddr	2014-01-29 20:12:24 +01:00
Adam Dunkels	765e9acded	Merge pull request #499 from adamdunkels/bold/modularize-everything ... A bold move: modularize everything	2014-01-29 08:17:10 -08:00
Ian Martin	f3cc607101	eval-adf7xxxmb4z: Use the nullrdc driver instead of sicslowmac.	2014-01-26 17:40:31 -05:00
Adam Dunkels	4f498e2eac	Updated the include paths to point to the new places	2014-01-26 23:20:47 +01:00
Adam Dunkels	2ec176891f	Added the necessary modules to make the eval-adf7xxxmb4z port compile	2014-01-26 23:20:47 +01:00
Adam Dunkels	824d2047da	Add the explicit list of modules, since we cannot do auto-dependency management of them	2014-01-26 23:20:47 +01:00
Adam Dunkels	fce84c178c	Removed unused rime-udp code	2014-01-26 23:20:45 +01:00
Adam Dunkels	8eace27f9b	Moved net/rime.h to net/rime/rime.h	2014-01-26 23:20:45 +01:00
Adam Dunkels	1be10f026a	Handle the CONTIKI_NO_NET case so that the ravenusbstick example builds	2014-01-26 23:20:42 +01:00
Adam Dunkels	6594873753	Updated the path to uip-debug.h	2014-01-26 23:20:41 +01:00
Adam Dunkels	4c2bd9f120	A set of default modules for the cc253x platform	2014-01-26 23:20:41 +01:00
Adam Dunkels	dee654cfe5	Put the cc253x custom makerules in its own customrules file	2014-01-26 23:20:41 +01:00
Adam Dunkels	7846eb2e2f	Split the cc2430 custom rules into its own file	2014-01-26 23:20:40 +01:00
Adam Dunkels	36a5aadc9e	Moved the 6502 custom rules into its own Makefile.customrules-6502 file	2014-01-26 23:20:40 +01:00
Fredrik Osterlind	cf32063c0b	introduced optional Makefile.customrules-$(TARGET), to contain custom platform make rules	2014-01-26 23:20:39 +01:00
Adam Dunkels	7a740b382f	Moved the individual MODULE definitions from the top-level Makefile.include into the individual platforms' Makefiles	2014-01-26 23:20:36 +01:00
Adam Dunkels	0fe08205e1	Moved the rimeaddr.[ch] code from the core/net/rime module to the core/net module, as it is used not only by rime code	2014-01-26 23:20:36 +01:00
Adam Dunkels	b02104e4c4	Add the sht11 device driver module to the z1 platform	2014-01-26 23:20:36 +01:00
Adam Dunkels	aaf0f83120	Add cxmac module to the sky platform	2014-01-26 23:20:35 +01:00
Adam Dunkels	9851ff85dd	Add a sensible set of modules for the sensinode platform	2014-01-26 23:20:35 +01:00
Adam Dunkels	b40f1210e6	Don't use the sicslowmac code, use nullrdc instead	2014-01-26 23:20:34 +01:00
Adam Dunkels	e556ecbc25	Don't use the sicslowmac code, use nullrdc instead	2014-01-26 23:20:34 +01:00
Adam Dunkels	d7013524f9	Add a sensible set of modules for the micaz platform	2014-01-26 23:20:34 +01:00
Adam Dunkels	ee5299fe6e	Add a sensible set of modules for the exp5438 platform	2014-01-26 23:20:33 +01:00
Adam Dunkels	51efdd952a	Define MODULES for the avr-raven and the avr-ravenusb platforms	2014-01-26 23:20:33 +01:00
Adam Dunkels	34d46fa533	Include driver modules	2014-01-26 23:20:32 +01:00
Adam Dunkels	25367fb08c	Moved the ds2411 driver into a dev/ds2411 module	2014-01-26 23:20:31 +01:00
Adam Dunkels	c9efe3c3c4	Moved the cc2520 driver into its own dev/cc2520 module	2014-01-26 23:20:31 +01:00
Adam Dunkels	4cfe6c4a5e	Moved the sht11 driver to its own module	2014-01-26 23:20:30 +01:00
Adam Dunkels	d91bab9104	Include a basic set of modules	2014-01-26 23:20:28 +01:00
Adam Dunkels	0b805e4763	Moved the cc2420 driver into a separate dev/cc2420 module	2014-01-26 23:20:27 +01:00
Adam Dunkels	c80615913f	Include the core/net and core/net/ip modules in the core/net/ipv4 module	2014-01-26 23:20:25 +01:00
Adam Dunkels	3a3e65a78d	Use the MODULES mechanism for the native platform	2014-01-26 23:20:24 +01:00
Adam Dunkels	5f3fe7f7c7	Updated include paths for the moved files under net/	2014-01-26 23:20:23 +01:00
Ian Martin	ed4edab461	eval-adf7xxxmb4z: Corrections to the platform README, update URLs to point to the mainline Contiki.	2014-01-24 12:49:16 -05:00
Oliver Schmidt	0258c413cc	Merge pull request #539 from oliverschmidt/master ... Added more flexibility to webbrowser -> wget forwarding.	2014-01-24 08:08:08 -08:00
Oliver Schmidt	1f4613383f	Added more flexibility to webbrowser -> wget forwarding. ... - Up to now the CTK program handler was necessary to start wget and forward the URL. Now alternatively the webbrowser uses the underlying OS to exec wget. - Up to now windowed CTK was necessary to display the acknowledge dialog. Now alternatively the webbrowser displays the acknowledge text and buttons right in the webpage area. - For now the targets 'win32' and 'c64' make use of the new capabilities.	2014-01-24 16:09:30 +01:00
Oliver Schmidt	8baf2d7b42	Merge pull request #536 from oliverschmidt/master ... Copied 'contiki_arg[c|v]' from 'native' to the other desktop targets.	2014-01-24 03:41:42 -08:00
Oliver Schmidt	fc983e2e79	Copied 'contiki_arg[c|v]' from 'native' to the other desktop targets. ... - On the retro targets support for 'contiki_arg[c|v]' is optional as accesing arg[c|v] is rather expensive.	2014-01-24 11:56:40 +01:00
Ian Martin	a897426410	Increase the default baudrate to 38400 bps for RL78.	2014-01-22 18:42:18 -05:00
Oliver Schmidt	510678bed0	Added mouse support for the Atari.	2014-01-20 22:51:40 +01:00
Oliver Schmidt	a24865de72	Add somewhat more support to use different mouse drivers. ... - The default mouse driver is now always named 'contiki.mou'. - Alternative mouse drivers are present in the disk images. - Users can select their mouse driver by renaming the files.	2014-01-17 23:45:59 +01:00
Oliver Schmidt	fb20cf5ee6	Added UIP_CONF_LLH_LEN.	2014-01-17 22:07:03 +01:00
Ian Martin	85b439e33a	Add eval-adf7xxxmb4z platform makefile.	2014-01-10 15:03:38 -05:00
Ian Martin	174d4dd80c	Adds support for ADF7023 sub-GHz radio from Analog Devices and RL78 series MCU from Renesas. ... This example platform for this port is the EVAL-ADF7XXXMB4Z w/ radio daughter cards: http://www.analog.com/en/evaluation/eval-adf7023/eb.html See the platform readme for usage and platform information: https://github.com/contiki-os/contiki/tree/master/platform/eval-adf7xxxmb4z/readme.md All files provided by Analog Devices for this port are released under the same license as Contiki and copyright Analog Devices Inc. per agreement between Redwire Consulting, LLC and Analog Devices Inc. (SOW 08122013)	2014-01-04 18:56:51 -05:00
Oliver Schmidt	63725eff36	Merge remote-tracking branch 'upstream/master'	2013-12-12 20:46:43 +01:00
Oliver Schmidt	3b2173e01f	Have CBM DOS filetype of imported files match the one used by cc65. ... CFS_WRITE implies O_TRUNC which is implemented on CBM DOS by deleting an exsisting file. Hoewever this succeeds only if the CBM DOS filetype matches. We need a working O_TRUNC in order to be able to overwrite the contiki.cfg configuration file. Note: Now it has be clarified why overwriting the configuration file started to fail the CBM PFS (platform file system) can be activated for the recently added ethconfig program.	2013-12-12 18:57:40 +01:00
Benoît Thébaudeau	dbba311270	cc2538: Add adc driver and example ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-12-06 22:07:45 +01:00
George Oikonomou	f2c552bb55	Merge pull request #478 from ADVANSEE/cc2538-startup-cleanup ... cc2538: Startup cleanup	2013-12-05 11:07:19 -08:00
George Oikonomou	63298843b3	Merge pull request #491 from g-oikonomou/remove-lpp-from-readme ... Remove LPP discussion from the cc2538 README	2013-12-05 11:07:03 -08:00
George Oikonomou	17b2150081	Merge pull request #463 from ADVANSEE/cc2538-ports-pins ... cc2538: Clean up and improve port and pin definitions	2013-12-05 10:31:29 -08:00
George Oikonomou	6f22fd6642	Remove LPP discussion from the cc2538 README	2013-12-05 18:16:22 +00:00
Benoît Thébaudeau	a2686e581e	cc2538: Add header file for flash CCA page and use it ... Create a dedicated header file with all the definitions for the flash lock bit page and customer configuration area. This avoids duplicating those definitions in the startup-gcc.c files of all CC2538-based platforms, and this also allows to easily manipulate the CCA from outside startup-gcc.c (e.g. for on-the-air firmware update). The definitions are now complete contrary to what was in startup-gcc.c: - Definitions have been added to select the bootloader backdoor pin and active level if enabled. - Definitions have been added to access the page and debug lock bits. The debug lock bit can be used to prevent someone from reading back a programmed firmware through JTAG if the firmware binary image has to be confidential, which should be combined with a disabled bootloader backdoor. - The application entry point is now tied to the beginning of the .text section instead of to the beginning of the flash. This allows projects using custom linker scripts to place the application entry point anywhere in the flash, which can be useful e.g. for on-the-air firmware update. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-12-05 18:45:51 +01:00
Benoît Thébaudeau	65806f53eb	cc2538dk: startup-gcc: Do not redefine SYS_CTRL_EMUOVR ... SYS_CTRL_EMUOVR is already defined in sys-ctrl.h, so #include this header file instead of redefining SYS_CTRL_EMUOVR in startup-gcc.c. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-12-05 18:41:49 +01:00
George Oikonomou	acebfa2932	Merge pull request #466 from ADVANSEE/cc2538dk-slip-enable ... cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED	2013-12-05 09:11:38 -08:00
Mariano Alvira	590b3f48a9	Merge pull request #477 from MariaLauraStefanizzi/eeprom ... i2c and eeprom drivers for mbxxx boards	2013-12-02 09:20:14 -08:00
Mariano Alvira	86c593b7cd	Merge pull request #481 from ismb-pert/fix-sleep ... Fix sleep	2013-12-02 09:19:25 -08:00
Mariano Alvira	2ab24f4fc3	Merge pull request #387 from chrta/mb950_1_rev_B ... Added support for STM32w boards MB950 and MB951 revision B.	2013-12-02 09:11:50 -08:00
Gianfranco Costamagna	ae27278714	Readded clock.c file, deleted in pull request #266, fixing issue #440	2013-12-02 11:38:07 +01:00
Adam Dunkels	0fd503af42	Removed the experimental checkpointing code	2013-11-28 14:09:17 +01:00
Maria Laura Stefanizzi	10c7066035	mbxxx eeprom driver ... This patch adds the eeprom driver needed to access M24C64 eeprom which is on some mbxxx boards. Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>	2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi	22f39ab4ff	MEMS I2C integration. ... This patch allows the MEMS driver to use the i2c driver. Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>	2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi	a9c0768fd6	Integrate I2C driver into board initializzation ... This patch add I2C initializzation for board with I2C devices. Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>	2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi	c7b1248aac	mbxxx I2C driver. ... This patch add the I2C driver for mbxxx platform to communicate with devices connected to the SC2 I2C bus. Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>	2013-11-27 15:40:07 +01:00
Adam Dunkels	0d04db2b03	Merge pull request #428 from g-oikonomou/config-sanity ... Remove unnecessary stuff from various Makefiles (Config Sanity, Pt 1)	2013-11-26 15:05:08 -08:00
Benoît Thébaudeau	436b585d7e	cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED ... As the comment in contiki-conf.h says, the automatic definition of SLIP_ARCH_CONF_ENABLED works only if UIP_FALLBACK_INTERFACE is tied to SLIP. If UIP_FALLBACK_INTERFACE is set to another interface, SLIP_ARCH_CONF_ENABLED is still automatically set to 1, leading to unwanted SLIP_END characters from dbg.c:putchar() being printed on the UART. This change makes it possible to force the definition of SLIP_ARCH_CONF_ENABLED (e.g. from project-conf.h), so that it can be disabled if UIP_FALLBACK_INTERFACE is used with something else than SLIP. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-25 20:48:52 +01:00
Benoît Thébaudeau	d2f3795a30	cc2538: Clean up port and pin definitions ... Homogenize port and pin definitions naming: - PERIPHERAL_FUNCTION_PORT for the port ID, - PERIPHERAL_FUNCTION_PIN for the pin ID, - PERIPHERAL_FUNCTION_PORT_BASE for the port base, - PERIPHERAL_FUNCTION_PIN_MASK for the pin mask. Define only PERIPHERAL_FUNCTION_PORT and PERIPHERAL_FUNCTION_PIN in board.h, and deduce PERIPHERAL_FUNCTION_PORT_BASE and PERIPHERAL_FUNCTION_PIN_MASK in the driver from the former definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-25 15:00:41 +01:00
Adam Dunkels	bb2dcaa057	A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix	2013-11-24 20:20:11 +01:00
Adam Dunkels	19b32c54c0	Removed the old unused hc.[ch] code	2013-11-24 11:02:35 +01:00
Adam Dunkels	cb8fc35e25	Removed the redbee platforms	2013-11-22 16:33:06 +01:00
Adam Dunkels	eb99534c43	Removed the stk500/stk501 platforms	2013-11-22 16:33:06 +01:00
Adam Dunkels	d68ce09fd5	Removed the stepper-robot platform	2013-11-22 16:33:06 +01:00
Adam Dunkels	13117203e0	Removed pc-6001 platform	2013-11-22 16:33:05 +01:00
Adam Dunkels	44370be06f	Removed old, unused msp430-based platforms	2013-11-22 16:33:05 +01:00
Fredrik Osterlind	b5c94910ac	Renamed Java packages to match our contiki-os.org domain. Note that this commit does not affect external dependencies ... like /tools/mspsim. This is a very simple modification that affects a very large number of files in Contiki: Cooja, /platform/cooja, Collect-view, Coffe-manager, and Cooja simulation files (.csc). I've gone through Contiki to update all references I could find. Nevertheless, this commit will likely break external dependencies, like saved Cooja simulation files.	2013-11-20 16:43:27 +01:00
George Oikonomou	4eeb527cb8	Don't specify -DUIP_CONF_IPV6 in platform makefiles ... Makefile.include has done it for us already, we no longer need to do so ourselves	2013-11-20 14:52:33 +00:00
Nicolas Tsiftes	d183b87f4b	Merge pull request #434 from adamdunkels/push/cleanup-sys ... Remove old unused code from the core/sys/ directory	2013-11-19 09:53:57 -08:00
Adam Dunkels	523c03e4b8	Removed old unused profile.h code	2013-11-19 08:31:52 +01:00
Yvonne-Anne Pignolet	83ae37b48e	Add access to LQI and RSSI to Contiki motes	2013-11-18 15:05:23 +01:00
George Oikonomou	b10c78f854	Merge pull request #425 from ADVANSEE/cc2538-gpio ... cc2538: gpio: Bug fix and various improvements	2013-11-15 13:04:09 -08:00
George Oikonomou	98a1f2dfa9	Merge pull request #408 from ADVANSEE/cc2538-uart ... cc2538: lpm: Add registration mechanism for peripherals and use it	2013-11-15 12:57:03 -08:00
Benoît Thébaudeau	680050861c	cc2538: gpio: Use accessor macros ... Use the GPIO accessor macros instead of copying raw register access code all over the place. This is cleaner and less error prone. This fixes the setting of the USB pull-up resistor that worked only by chance on the CC2538DK because it is controlled by the pin 0 of the used GPIO port. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 19:57:44 +01:00
Benoît Thébaudeau	0692ee251d	cc2538: usb: Use the new LPM peripheral registration ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 17:14:45 +01:00
Benoît Thébaudeau	d35732505b	cc2538: lpm: Add registration mechanism for peripherals ... Some peripherals have their clocks automatically gated in PM1+ modes, so they cannot operate. This new mechanism gives peripherals a way to prohibit PM1+ modes so that they can properly complete their current operations before entering PM1+. This mechanism is implemented with peripheral functions registered to the LPM module. These functions return whether the associated peripheral permits or not PM1+ modes. They are called by the LPM module each time PM1+ might be possible. If any of the peripherals wants to block PM1+, then the system is only dropped to PM0. Partly from: George Oikonomou Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 17:09:22 +01:00
George Oikonomou	d08a87880c	Merge pull request #410 from ADVANSEE/cc2538-sys_ctrl ... cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal	2013-11-15 07:42:45 -08:00
Benoît Thébaudeau	47d570343e	cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 15:52:10 +01:00
Benoît Thébaudeau	6452624120	cc2538dk: Make it possible to override UIP_CONF_TCP_MSS ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 15:41:58 +01:00
Adam Dunkels	f2f0540051	Merge pull request #331 from alessandrelli/msp430-gcc-4.7-flags-wismote ... Add mspgcc 4.7.x flags to the wismote makefile	2013-11-14 12:30:47 -08:00
George Oikonomou	2893af5e5d	Document alternative toolchain for the CC2538DK	2013-11-14 12:22:21 +00:00
Adam Dunkels	df2d2f53c2	Merge pull request #407 from cmorty/submodule ... Add submodule support for MSPSim and get Travis green again.	2013-11-14 03:22:03 -08:00
Oliver Schmidt	2d7d1b123d	Added 6502 driver for WIZnet W5100 in MACRAW mode.	2013-11-09 23:15:20 +01:00
Moritz 'Morty' Strübe	c67c048cac	Clean up setting channel and CCA-threshold for CC2420 based motes. ... The CCA-threshold now defaults to -46 which give better simulation results and typically also better experimental results. This adjustment is also needed due to commit 0a13f99 in mspsim. As promised in https://github.com/mspsim/mspsim/pull/18 it broke the regression tests.	2013-11-07 17:28:33 +01:00
Christian Taedcke	ae6972426d	Added support for STM32w boards MB950 and MB951 revision B.	2013-10-19 16:58:54 +02:00
Oliver Schmidt	c6474cc8bc	Final adjustments for the switch from 'atari' to 'atarixl'.	2013-10-06 17:23:39 +02:00
Oliver Schmidt	37b66bac5a	Finetuned Atari XL memory layout. ... The Telent server includes both uIP logging and uIP client functionality. Therefore uip.o is somewhat larger.	2013-10-05 23:51:49 +02:00
Oliver Schmidt	57d9c43a33	Removed support for 'atari' now that 'atarixl' is part of the cc65 master.	2013-10-03 22:55:32 +02:00
Oliver Schmidt	149f3834e6	Adjusted Makefile to the final 'atarixl' cc65 target. ... - Assign source files to the splitted shadow RAM areas. - Switched to dynamic Ethernet driver loading.	2013-10-03 22:40:25 +02:00
George Oikonomou	2957d44ff8	Merge pull request #352 from lab11/cc2538-spi-driver ... Added SPI driver for CC2538	2013-09-28 13:25:17 -07:00
Brad Campbell	e2af903d05	Added SPI driver for CC2538 ... This uses the core/dev/spi.h header and implements the spi_init() function and the various macros for SPI operation. ssi.h contains all of the register locations and information. This implementation is not very versatile, mostly because I don't how to make it flexible in the contiki system. It supports pin muxing for the four spi pins, but other than that picks sensible defaults. The SPI macros (like SPI_READ()) are defined in cpu/cc2538/spi-arch.h. In order to use the SPI driver, add the following includes to your project: #include "spi-arch.h #include "dev/spi.h"	2013-09-27 17:46:15 -04:00
Brad Campbell	766fc5a174	Add conf checks to CC2538dk conf file ... Allows for specific apps to control more settings of the platform.	2013-09-11 21:43:13 -04:00
Oliver Schmidt	17bbded894	Allow text screen memory to be aligned to 0x2000.	2013-09-10 20:59:19 +02:00
Oliver Schmidt	6fc83cf601	Initialize tcpip process before resolver process. ... Since introduction of mDNS (f145c17039) the resolver process initialization depends on the tcpip process already being initialized (because of the call to udp_new()).	2013-09-01 20:53:51 +02:00
Simon Duquennoy	248301a041	Fix naming issues and includes in uip-ds6-nbr.h	2013-08-19 17:48:30 +02:00
Simon Duquennoy	5dc05e7913	Port apps, examples, platforms and tools so they use the new neighbor and route API.	2013-08-19 17:48:30 +02:00
Simon Duquennoy	ff093a2b50	Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead.	2013-08-19 17:48:30 +02:00
Fredrik Osterlind	150807f2e6	removed rpl configuration, instead using contiki default values	2013-08-16 15:06:31 +02:00
Fredrik Osterlind	8041f66d8c	link-layer acks support for cooja motes	2013-08-15 14:32:35 +02:00
Fredrik Osterlind	3caf1bfab4	cooja motes rimestats	2013-08-15 11:56:12 +02:00
Daniele Alessandrelli	e82d201ca5	Added mspgcc 4.7.x flags to the Wismote makefile	2013-08-12 16:37:45 +02:00
Nicolas Tsiftes	7987a6dac7	Merge pull request #328 from g-oikonomou/cc2538-uart-config ... Make the CC2538 UART driver more configurable	2013-08-09 10:20:36 -07:00
George Oikonomou	4f1485e238	Remove the second 6LoWPAN context from Sensinode ... This context was once used in an in-house testbed and is not required upstream	2013-08-09 16:38:12 +01:00
George Oikonomou	f30d92b101	Change the way we switch between cc2530 models ... The switch is now performed through a configuration define, which has also been renamed to better match Contiki's naming conventions	2013-08-09 15:53:23 +01:00
George Oikonomou	1b0470687b	Change the cc2531 usb stick descriptor ... The CC2531 USB stick now identifies itself as a 'Texas Instruments CC2531 USB Dongle' and uses a TI-assigmed VID:PID. The VID:PID is now configurable in contiki- or project-conf.h	2013-08-09 15:51:58 +01:00
George Oikonomou	0614c4e720	No longer build rpl-of0 for Sensinodes	2013-08-09 15:50:47 +01:00
George Oikonomou	6a79ac3b2d	Increase 8051 plaform configurability	2013-08-09 15:50:47 +01:00
George Oikonomou	70d8bd71df	Disable example-defined putchar for 8051 platforms	2013-08-09 15:50:47 +01:00
George Oikonomou	ecf8ca55ef	Move SLIP interface define to project-conf	2013-08-09 15:50:47 +01:00
George Oikonomou	fa166116b7	Auto-enable SLIP for 8051-based platforms	2013-08-09 15:50:47 +01:00
George Oikonomou	0a7094bc39	Remove leftover make targets ... The sensinode platform does not support .upload and .serialdump Their presence in the makefile has confused in the past confused some users. This commit removes them The commit also removes the $(OBJECTDIR)/%.rel: %.cS recipe which is not used by either 8051 platform and is probably broken anyway, since it has been unmaintained for years	2013-08-09 15:48:05 +01:00
George Oikonomou	6c6013b898	Make the CC2538 UART driver more configurable ... * We can now very easily switch between UART0 and UART1 through a define * We can also configure the UART RX and TX port/pin through defines	2013-08-09 12:20:25 +01:00
Adam Dunkels	70eb439a88	Merge pull request #325 from g-oikonomou/cc2538-tools-release ... CC2538 IEEE address and README updates	2013-08-07 08:25:30 -07:00
George Oikonomou	81318909e0	Read IEEE address from InfoPage by default	2013-08-07 15:28:33 +01:00
George Oikonomou	6b01b36cc9	Update readme references and tool download URLs	2013-08-07 15:28:04 +01:00
George Oikonomou	64c16d4be1	Adjust a config define to its new name	2013-08-07 15:27:19 +01:00
Adam Dunkels	99c331382b	Turn off the LCD by default as it is somewhat flaky	2013-08-06 21:33:03 +02:00
Adam Dunkels	e147c63044	Added mspgcc 4.7.x flags	2013-08-06 21:33:03 +02:00
Oliver Schmidt	6ab336f55f	Several minor consistency improvements.	2013-07-31 00:55:31 +02:00
Oliver Schmidt	8d23d1b0bb	Support the recently added verbosity control.	2013-07-31 00:15:38 +02:00
Oliver Schmidt	3cda787264	Be consistent with tab chars in Makefiles.	2013-07-30 23:39:02 +02:00
Adam Dunkels	54f2109134	Merge pull request #290 from simonduq/rpl-mrhof-etx-nomc ... Update of RPL MRHOF (use no metric container with ETX [RFC6719])	2013-07-29 00:56:25 -07:00
Mariano Alvira	5d19de3dbf	Merge pull request #266 from ismb-pert/fix-mbxxx ... mb851 platform is now the more generic mbxxx. STM32W_CPUREV environment variable is used to select the variant of STM32W to use.	2013-07-26 07:38:11 -07:00
Nicolas Tsiftes	8f5941a4c9	Merge pull request #253 from JelmerT/feature-z1-tlc59116 ... TLC59116 I2C led driver for Zolertia Z1	2013-07-23 11:09:02 -07:00
Simon Duquennoy	defcc639ce	Use no metric container when having MRHOF with ETX, as specified in RFC6719. Renamed rpl-of-etx to rpl-mrhof.	2013-07-23 19:36:38 +02:00
stefano pascali	36e7db42de	Some little refactor	2013-07-19 16:15:55 +02:00
stefano pascali	b43ce0f677	Travis-ci tweaks, added CPUREV to 01 regression test, needed by mbxxx platform	2013-07-12 17:07:04 +02:00
stefano pascali	fcb09d5d30	Fixed mbxxx platform	2013-07-11 17:56:17 +02:00
Robert Quattlebaum	0308d3fcf0	settings: Correct a problem where sometimes CC_INLINE is not defined properly.	2013-07-02 08:46:03 -07:00
Jelmer Tiete	4e0d5cf65e	Corrected copyright holder.	2013-06-24 16:13:35 +02:00
Jelmer Tiete	9810bfbcfd	contiki code style changes and copyright update + added source to ARCH instead of SOURCEFILES in platform Makefile	2013-06-24 15:17:52 +02:00
Jelmer Tiete	0a4a14aacb	added tlc59116 datasheet url	2013-06-24 15:17:52 +02:00
Jelmer Tiete	ed8be502db	tlc59116 for zolertia, added 0 values at init and code clean-up	2013-06-24 15:17:52 +02:00
Jelmer Tiete	cc2567b988	working tlc59116 implementation for z1	2013-06-24 15:17:52 +02:00
Jelmer Tiete	8b61492152	first implementation for tlc59116 on z1	2013-06-24 15:17:52 +02:00
Peter A. Bigot	5fc0575e99	Makefile.include: support make clean all ... Historically $(OBJECTDIR) was created when Makefile.include is read. A consequence is that combining "clean" with "all" (or any other build target) results in an error because the clean removes the object directory that is required to exist when building dependencies. Creating $(OBJECTDIR) on-demand ensures it is present when needed. Removed creation of $(OBJECTDIR) on initial read, and added an order-only dependency forcing its creation all Makefile* rules where the target is explicitly or implicitly in $(OBJECTDIR).	2013-06-20 17:45:41 -05:00
Oliver Schmidt	af93e5fbd9	Merge pull request #274 from oliverschmidt/master ... Made use of Atari XL shadow RAM.	2013-06-18 13:38:08 -07:00
Oliver Schmidt	b90a1e2417	Made use of Atari XL shadow RAM. ... The new Atari XL target allows cc65 programs to make use of the shadow RAM. This allows to turn aon all features of the web browser - and will allow for additional improvements to come :-)	2013-06-18 22:36:58 +02:00
Oliver Schmidt	807293ab6d	Merge pull request #267 from oliverschmidt/master ... Removed some more old RCS tags from the Contiki source tree.	2013-06-13 06:55:47 -07:00
Oliver Schmidt	79bb5ea73f	Removed some more old RCS tags from the Contiki source tree.	2013-06-13 15:54:26 +02:00
Matthias Kovatsch	58dd33b145	Fixing minimal-net for Cygwin.	2013-06-06 19:04:11 +02:00
Oliver Schmidt	d636d7110f	Added platform 'Atari XL'. ... Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-) The platform 'atarixl' will replace the platform 'atari'. However I need both for some transition period.	2013-06-01 22:49:00 +02:00
Oliver Schmidt	c138dc758a	Removed obsolete file. ... I wrote: > Moved from last cc65 release (2.13.3) to recent cc65 snapshot (2.13.9). > [...] > Atari: > - The builtin linker config allows to override the start addr so there no more need for a custom linker config. > [...] However I didn't actually remove the custom linker config not needed anymore.	2013-06-01 22:38:45 +02:00
Robert Quattlebaum	36fbbe48aa	Merge pull request #244 from darconeous/pull-requests/cpu-native-tapdev-ipv6-fix ... native/net/tapdev: Fix for new `UIP_CONF_IPV6` handling.	2013-05-21 17:42:44 -07:00
Nicolas Tsiftes	a445c4020d	Merge pull request #153 from darconeous/pull-requests/cpu-avr-bootloader ... avr/bootloader.c: Now compatible with bootloaders which always run first	2013-05-20 05:49:13 -07:00
Nicolas Tsiftes	4b80ad9c89	Merge pull request #239 from darconeous/pull-requests/avr-ravenusb-rpl ... avr-ravenusb/cdc_task: Fix compile issues.	2013-05-20 04:42:03 -07:00
Robert Quattlebaum	09eec82d08	Merge pull request #134 from darconeous/pull-requests/cpu-avr-avrdude-mcu ... cpu/avr: Added "AVRDUDE_MCU" configuration parameter.	2013-05-19 17:35:26 -07:00
Robert Quattlebaum	9c70e0e5cc	native/net/tapdev: Fix for new UIP_CONF_IPV6 handling.	2013-05-19 17:27:30 -07:00
Robert Quattlebaum	674f70b6c3	cpu/avr: Added "AVRDUDE_MCU" configuration parameter.	2013-05-19 14:23:31 -07:00
Adam Dunkels	aaac20a950	Merge pull request #225 from tecip-nes/pic32_minor_reorganization ... Pic32 minor reorganization	2013-05-19 14:22:14 -07:00
Robert Quattlebaum	3e0666265d	avr-ravenusb/cdc_task: Fix compile issues. ... A lot more changes are in the pipeline, but compiling is a good start.	2013-05-19 11:31:01 -07:00
Robert Quattlebaum	92b4f5fe59	platform/econotag: Allow RPL and Router settings to be overridden.	2013-05-19 08:21:18 -07:00
Robert Quattlebaum	9c17a542a7	avr/bootloader.c: Now compatible with bootloaders which always run first. ... The boot loader now knows when to go into bootstrap mode by looking for a specific EEPROM value. Also updated code style to match Contiki code style guidelines.	2013-05-19 08:21:16 -07:00
Mariano Alvira	5df586e09d	Merge pull request #184 from g-oikonomou/bug-fixes/rimestats ... Rimestats Fix (#183)	2013-05-19 07:45:22 -07:00
Mariano Alvira	26d81d85a1	Merge pull request #228 from g-oikonomou/bug-fixes/uip-conf-ipv6 ... Fix 8051 port builds to play nicely with #173	2013-05-18 15:36:59 -07:00
Robert Quattlebaum	535e90343c	Merge pull request #144 from darconeous/pull-requests/settings-for-all-targets ... core/lib/settings: Generalized settings manager to work on any platform	2013-05-18 12:03:09 -07:00
Robert Quattlebaum	b8c0f2de6c	cpu/native: Add file-backed simulated EEPROM to native cpu. ... This patch removes a defunct EEPROM implementation from the native platform and provides a new EEPROM implementation for the native cpu. The previous implementation appears to be vestigal. This is useful for testing code which uses the EEPROM without running the code on the actual hardware. By default the code will create a new temporary file as the EEPROM backing, reinitializing each time. If you would like to preserve the EEPROM contents or specify a specific EEPROM file to use, you can set the `CONTIKI_EEPROM` environment variable to the name of the EEPROM file you wish to use instead. If it already exists, its contents will be used. If it does not already exist, it will be created and initialized by filling it with `0xFF`---just like a real EEPROM. A new example is also included, which was used to verify the correctness of the implementation. It can easily be used to verify the EEPROM implementations of other targets.	2013-05-18 10:29:41 -07:00
George Oikonomou	13e29c7975	Fix 8051 port builds to play nicely with #173	2013-05-17 23:41:36 +01:00
Giovanni evilaliv3 Pellerano	49d861979b	remote power switch example updated to use coap version 13	2013-05-17 14:45:13 +02:00
Giovanni evilaliv3 Pellerano	c33d51e762	pic32 minor cleanups	2013-05-17 14:32:39 +02:00
Adam Dunkels	59a8df14a8	Merge pull request #189 from sieben/markdown ... Update to markdown	2013-05-16 00:24:25 -07:00
François Revol	95eb505345	win32: Fix cygwin build ... size_t is declared in sys/types.h	2013-04-20 14:44:27 +02:00
George Oikonomou	8b5b2bd4d8	CC2538 Documentation typo and grammar fixes	2013-04-17 15:41:41 +01:00
George Oikonomou	007e113ea9	Improve handling of CDC ACM line state ... - For the CC2538, simplify handling of USB_CDC_ACM_LINE_STATE events. Ignore the Carrier Control (RTS) bit when receiving a SET_CONTROL_LINE _STATE request, we are a full duplex device. - Improve behaviour of the CC2531 USB stick when there is no process on the host to read IN data. Basically, we adopt the CC2538 approach and we only send data when a DTE is present	2013-04-16 15:49:05 +01:00
George Oikonomou	40f49948e6	New Platform: TI CC2538 Development Kit ... This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK	2013-04-06 21:07:31 +01:00
Rémy Léone	69d936d94a	Update README.md ... Minor markdown => md renaming	2013-04-03 14:52:27 +03:00
Oliver Schmidt	d5d8de7372	Merge pull request #181 from mmuman/ctk-ncurses-try4 ... TODOs: - Check FreeBSD - Adjust Makefile.target	2013-03-31 14:36:30 -07:00
François Revol	476be8de7e	ctk-curses: style fixes ... Thanks tools/contiki-indent	2013-03-31 04:07:03 +02:00
François Revol	3633c52bcb	ctk-curses: whitespace fixes	2013-03-30 23:34:18 +01:00
François Revol	a03334a59d	ctk-curses: style fixes	2013-03-30 23:26:22 +01:00
François Revol	8daf2b6659	ctk-curses: remove unused code ... The setupterm() call is not needed when using curses.	2013-03-30 23:15:08 +01:00
François Revol	976746f97f	ctk-curses: cleanup	2013-03-30 23:07:38 +01:00
François Revol	5a4382a996	ctk-curses: uncomment refresh() calls ... I'm not yet sure they are required there but it shouldn't hurt.	2013-03-30 23:03:04 +01:00
François Revol	065c25cfc5	ctk-curses: uncomment nonl() call and fix return key handling	2013-03-30 23:00:44 +01:00
François Revol	f63aada8b6	ctk-curses: make sure gcc finds ncurses headers on cygwin ... They are located in /usr/include/ncurses	2013-03-30 18:11:17 +01:00
François Revol	45662ac1ef	ctk-curses: add some comments for clarity	2013-03-30 17:57:01 +01:00
Rémy Léone	e6bd4f1dde	Rename to md	2013-03-26 23:15:37 +01:00
Rémy Léone	7b40a568a6	Update to markdown ... - Spellchecking - Update plain text to github markdown	2013-03-26 16:55:19 +01:00
François Revol	9372a153dd	win32: Prefix color names with CTK_ ... For consistency with ctk-curses, prefix CTK colors with CTK_. Also introduce COLOR_BG to make it easier to change the widgets background at once.	2013-03-26 11:51:58 +01:00
François Revol	ada305a3be	ctk-curses: Introduce CTK-specific color names ... Since ncurses also defines COLOR_BLACK and friends, and we want to avoid including curses.h in contiki-conf.h, define CTK_COLOR_* constants and map them to curses colors in ctk-curses.c.	2013-03-26 11:37:10 +01:00
François Revol	56f11e7524	ctk-curses: C89 ... At least Haiku still uses gcc2 by default.	2013-03-26 08:51:37 +01:00
François Revol	54199d7121	ctk-curses: add CURSES_LIB to TARGET_LIBFILES, not LDFLAGS ... It seems TARGET_LIBFILES is used at the end of the link command, unlike LDFLAGS, which should help when only a static curses lib is available, like on Haiku.	2013-03-26 08:10:59 +01:00
Nicolas Tsiftes	f8edbbb8d2	Merge pull request #178 from adamdunkels/feature-contiki-default-conf ... A first stab at a default configuration system	2013-03-25 20:13:15 -07:00
François Revol	2bb9ced3d6	ctk-curses: Guard ncurses-specific mouse function calls ... The mouse support is ncurses-specific so guard it with proper #ifdef.	2013-03-26 02:01:28 +01:00
François Revol	86cb1769f6	ctk-curses: Remove extra mouse events pumping loop ... It was added to avoid getting garbage keyboard input in some cases, however it seems not to happen very often and might be the cause of hang in OSX. If garbage input happens again we can always try to pump a single event each time instead of looping anyway.	2013-03-26 01:49:05 +01:00
François Revol	343a7643b7	ctk-curses: Introduce CURSES_LIB makefile variable ... This should allow overriding it depending on $(HOST_OS).	2013-03-26 01:12:09 +01:00
George Oikonomou	8c0cf50dca	Rename RIMESTATS_CONF_ON to RIMESTATS_CONF_ENABLED	2013-03-20 21:14:34 +00:00
Robert Quattlebaum	28a1e40ebd	core/lib/settings: Generalized Settings Manager to work on any platform ... This commit moves the Settings Manager from the AVR codebase into the Contiki core library. Any platform that implements the Contiki EEPROM API can now use the Settings Manager's key-value store for storing their persistent configuration info. The Settings Manager is a EEPROM-based key-value store. Keys are 16-bit integers and values may be up to 16,383 bytes long. It is intended to be used to store configuration-related information, like network settings, radio channels, etc. * Robust data format which requires no initialization. * Supports multiple values with the same key. * Data can be appended without erasing EEPROM. * Max size of settings data can be easily increased in the future, as long as it doesn't overlap with application data. The format was inspired by the [OLPC manufacturing data format][]. Since the beginning of EEPROM often contains application-specific information, the best place to store settings is at the end of EEPROM (the "top"). Because we are starting at the end of EEPROM, it makes sense to grow the list of key-value pairs downward, toward the start of EEPROM. Each key-value pair is stored in memory in the following format: Order | Size | Name | Description --------:|---------:|--------------|------------------------------- 0 | 2 | `key` | 16-bit key -2 | 1 | `size_check` | One's-complement of next byte -3 | 1 or 2 | `size` | The size of `value`, in bytes -4 or -5 | variable | `value` | Value associated with `key` The end of the key-value pairs is denoted by the first invalid entry. An invalid entry has any of the following attributes: * The `size_check` byte doesn't match the one's compliment of the `size` byte (or `size_low` byte). * The key has a value of 0x0000. [OLPC manufacturing data format]: http://wiki.laptop.org/go/Manufacturing_data	2013-03-20 11:57:13 -07:00
François Revol	b7601c3acb	ctk-curses: Cleanup	2013-03-20 17:16:37 +01:00
Oliver Schmidt	6ba28bf74f	Merge pull request #180 from mmuman/cleanup-and-fixes ... Cleanup and fixes	2013-03-20 02:37:24 -07:00
François Revol	1ce1232d0f	ctk-curses: Add configuration for various apps	2013-03-20 02:01:05 +01:00
François Revol	06d3c14213	ctk-curses: Enable screensaver	2013-03-20 02:01:05 +01:00
François Revol	1c5d6a9db7	ctk-curses: Cleanup + fixes ... * Cleanup * Fix warnings * Fix indentation * Only wait 1ms for keyboard timeout * Hide text cursor * Pump mouse events just in case * Add F9 as menu key since F10 is used as menu trigger by Gnome	2013-03-20 02:00:32 +01:00
François Revol	db982f7b82	ctk-curses: Add mouse support to the ncurses CTK backend.	2013-03-20 01:35:42 +01:00
François Revol	25e3f828aa	Ncurses-based CTK backend for the native platform.	2013-03-20 01:35:01 +01:00
François Revol	3d33248eff	native: Fix trailing whitespace	2013-03-19 20:00:26 +01:00
François Revol	877b059bc7	native: Use stderr for logging ... Since we will hopefully one day use stdout as a CTK display, use stderr instead for log output, which can be redirected to a file.	2013-03-19 19:24:59 +01:00
Adam Dunkels	a5046e83c7	Cleanup and refactoring of the STM32w port ... This is a general cleanup of things like code style issues and code structure of the STM32w port to make it more like the rest of Contiki is structured.	2013-03-18 13:31:26 +01:00
Adam Dunkels	277a348f60	Changed the name of the IPv6 number of route entries configuration from UIP_CONF_DS6_ROUTE_NBU to UIP_CONF_MAX_ROUTES.	2013-03-18 11:12:44 +01:00
Oliver Schmidt	a0e2120fdb	Added configurations of the new resolver.	2013-03-14 23:17:59 +01:00
Oliver Schmidt	bbc26ef489	Added support for strncasecmp() which is now used in resolv.c.	2013-03-13 14:43:05 +01:00
Adam Dunkels	0841bce833	Merge pull request #82 from darconeous/master ... Makefiles: Allow setting UIP_CONF_IPV6=0 to work as expected.	2013-03-10 12:51:03 -07:00
Adam Dunkels	c7ef7198a8	Merge pull request #85 from darconeous/native-target-osx ... Various updates to the minimal-net platform.	2013-03-10 12:48:07 -07:00
Adam Dunkels	9c8f1d5356	Merge pull request #137 from darconeous/pull-requests/platform-avr-ravenusb-httpd-isused-fix ... Fix for avr-ravenusb target builds due to missing 'isused'.	2013-03-09 06:24:46 -08:00
Oliver Schmidt	8e05c80d96	Merge pull request #151 from oliverschmidt/master ... Reorganized web page attribute data handling.	2013-03-06 07:34:07 -08:00
Oliver Schmidt	c7b8bac006	Reorganized web page attribute data handling. ... - Up to now the web browser used several fixed size arrays to hold the various types attribute data of the web page. This turned out to be way to inflexible for any non-trivial web page. Therefore now all attribute data is stored in a single buffer one after the other as they arrive from the parser only occupying the memory actually needed. This allows for pages with many links with rather short URLs as well as pages with few link with long URLs as well as pages with several simple forms as well as pages with one form with many form inputs. - Using the actual web page buffer to hold the text buffers of text entry fields was in general a cool idea but in reality it is often necessary to enter text longer than the size of the text entry field. Therefore the text buffer is now stored in the new unified attribute data buffer. - Splitting up the process of canonicalizing a link URL and actually navigating to the resulting URL allowed to get rid of the 'tmpurl' buffer used during form submit. Now the form action is canonicalized like a usual link, then the form input name/value pairs are written right into the 'url' buffer and afterwards the navigation is triggered. - Support for the 'render states' was completely removed. The only actually supported render state was centered output. The new unified attribute buffer would have complicated enumerating all widgets added to the page in order to adjust their position. Therefore I decided to drop the whole feature as the <center> tag is barely used anymore and newer center attributes are to hard to parse.	2013-03-06 16:29:36 +01:00
Oliver Schmidt	cdb16c02fa	Removed web browser settings that aren't actually different from the defaults.	2013-03-06 15:17:39 +01:00
Oliver Schmidt	830b500a7d	Merge pull request #149 from oliverschmidt/master ... Finetuned Language Card usage.	2013-03-06 05:58:14 -08:00
Oliver Schmidt	65ad87422f	Finetuned Language Card usage. ... Both the source code and the cc65 compiler have changed. So it made sense to review which object files are to be compiled for placement in the Language Card.	2013-03-06 14:57:24 +01:00
Mariano Alvira	ab8fe95864	Revert "Merge pull request #120 from Jeff-Ciesielski/stm32_cl" ... This reverts commit 029bc0ee27, reversing changes made to a7b3e99644. This uses LGPL libopencm3. While the patch doesn't include the code, the resulting binary would force the release of all code as LGPL.	2013-03-02 08:11:28 -05:00
Robert Quattlebaum	d454a7ca96	httpd-simple-avr: 'isused' seems to not be used anymore.	2013-02-28 22:08:28 -08:00
Nicolas Tsiftes	b3de9a05e7	Merge pull request #141 from cmorty/sky_MOTEID_missing_brace ... Add missing brace in sky Makefile	2013-02-24 15:27:23 -08:00
Mariano Alvira	029bc0ee27	Merge pull request #120 from Jeff-Ciesielski/stm32_cl ... Add initial support for STM32F1x Connectivity Line devices	2013-02-24 15:08:57 -08:00
Moritz 'Morty' Strübe	955fbc3c5a	Add missing brace in sky Makefile	2013-02-20 19:50:29 +01:00
Nicolas Tsiftes	a7b3e99644	Merge pull request #91 from JelmerT/z1-mac ... Added support for motelist and uploading to Z1 motes under Mac OSX	2013-02-17 09:28:49 -08:00
Nicolas Tsiftes	ebacb91e57	Merge pull request #98 from JelmerT/hotfix-z1-i2cmaster ... Bugfix z1 i2cmaster	2013-02-17 09:21:18 -08:00
Oliver Schmidt	010d495e03	loader.system is now official part of the cc65 Apple II support.	2013-02-17 00:30:55 +01:00
Oliver Schmidt	98060c1eab	Moved from last cc65 release (2.13.3) to recent cc65 snapshot (2.13.9). ... Relevant cc65 changes... General: - The compiler generates "extended" dependency info (like gcc) so there's no need for postprocessing whatsoever :-) - The linker is very pernickety regarding the ordering of cmdline options so a custom linker rule is necessary :-( Apple2: - The various memory usage scenarios aren't specified anymore via separate linker configs but via defines overriding default values in the builtin linker config. Atari: - The builtin linker config allows to override the start addr so there no more need for a custom linker config. - The C library comes with POSIX directory access. So there's no more need for for a custom coding. CBM: - The C library comes with POSIX directory access. So there's no more need for for a custom coding.	2013-02-14 15:42:43 +01:00
Oliver Schmidt	19c8f9ffdd	Merge pull request #122 from oliverschmidt/master ... There's no point in ctk_restore() for standalone GUI builds.	2013-02-09 12:50:37 -08:00
Oliver Schmidt	45c44e23d7	There's no point in ctk_restore() for standalone GUI builds.	2013-02-09 21:49:00 +01:00
Oliver Schmidt	c7f986faf5	Merge pull request #121 from oliverschmidt/master ... Several minor adjustments.	2013-02-08 17:04:04 -08:00
Oliver Schmidt	21b8be3798	Use plain ASCII chars for lines on Win32 console CTK.	2013-02-09 02:02:46 +01:00
Oliver Schmidt	b1eeaf31c9	Fixed Win32 'platform build'.	2013-02-09 02:00:35 +01:00
Jeff Ciesielski	222f93f023	stm32f107_basic: Add support for a simple stm32f107 platform ... This platform is a basic waveshare stm32f107 devkit which contains a USART, USB device port, some buttons and some LEDs. Unfortunately not enough to bring up networking, but enough to test building and a simple contiki shell	2013-02-06 15:43:25 -08:00
Mariano Alvira	299d8c6cbf	set the pin defaults properly to reduce current consumption on ... sleeping M12s.	2013-02-03 15:15:11 -05:00
Mariano Alvira	fb8bbf37cf	Use the RTC only as the main timer. ... This is a major change to how the main tick interrupt is handled on the mc1322x platforms. Instead of using two timer resources, TMR0 and RTC, this patch unifies all the timers to use the RTC. This is enabled by implementing etimers as scheduled rtimers. The main advantage (aside from freeing TMR0 for general use) is have the Contiki timebase come from the same source that will be used for sleeping and wakeup.	2013-02-03 15:15:05 -05:00
Robert Quattlebaum	0ca8a57f39	platform/minimal-net: Print out pseudo LED status.	2013-01-30 09:18:40 -08:00
Robert Quattlebaum	a571b663b0	platform/minimal-net: Better, more seamless support for OS X. ... This patch enables automatic route setup and cleanup when starting and stopping the minimal-net target on OS X. Both IPv4 and IPv6 are supported. Using the minimal-net target on OS X was absolute hell before I came up with this patch. Now it is painless.	2013-01-30 09:17:30 -08:00
Robert Quattlebaum	092b6f3baa	platform/minimal-net: Implement better idle behavior. ... The minimal-net target, as currently written, wakes up the CPU every millisecond to check for packets, and will only react in real-time to input from stdin. If you are running this on a laptop battery, your battery will quickly drain. This change allows the CPU to idle when there is literally nothing to do while still being responsive to input from stein and/or incoming packets. This fix should significantly improve performance while significantly improving power usage. Win-win. Also added `_xassert()` implementation so that the contiki- provided `assert()` macro will work properly when used on this platform.	2013-01-30 09:17:29 -08:00
Jelmer Tiete	f4976140fc	fixed z1 i2c bug where 2 extra bytes were read with every i2c-receive	2013-01-30 14:23:07 +01:00
Jelmer Tiete	12dd138915	fixed z1 i2c bug where 2 extra bytes were read with every i2c-receive	2013-01-30 14:15:16 +01:00
Jelmer Tiete	edf4e36094	removed tag from z1 Makefile.common	2013-01-30 11:13:19 +01:00
Oliver Schmidt	e88997b71c	Minor README updates.	2013-01-29 22:44:37 +01:00
Oliver Schmidt	1a5e20bc5f	Remove tab chars from retro C sources.	2013-01-28 23:43:08 +01:00
Jelmer Tiete	7ce2688d84	Added support for motelist and uploading to Z1 motes under Mac OSX	2013-01-23 22:56:43 +01:00
Robert Quattlebaum	5afcbf6fff	Makefiles: Allow setting UIP_CONF_IPV6=0 to work as expected. ... Setting UIP_CONF_IPV6 to zero from the make build command line is something that seems like it should ensure that IPv6 is disabled, but in fact it actually *enables* IPv6. This seems counter intuitive, so this patch changes the behavior of the makefiles to handle this case properly.	2013-01-14 22:03:42 -08:00
Giovanni `evilaliv3` Pellerano	ee556dcf14	minor corrections to adhere contiki code style guidelines	2012-12-21 12:36:29 +01:00
Giovanni `evilaliv3` Pellerano	fdd380e7ca	added support for SEED-EYE board (http://rtn.sssup.it/index.php/hardware/seed-eye)	2012-12-20 23:57:47 +01:00
George Oikonomou	f5bc1c92ba	Update to the new ds6_route API	2012-12-16 19:28:56 +00:00
George Oikonomou	351a4d39b9	Code style fixes: cc2530dk	2012-12-16 19:28:56 +00:00
George Oikonomou	b4bb51e811	Code style fixes: sensinode	2012-12-16 19:28:55 +00:00
Moritz 'Morty' Strübe	79aa5dbc01	Get rid of generc ihex-file to allow parallel uploads	2012-12-11 12:40:38 +01:00
Moritz 'Morty' Strübe	7213d36d63	Support MOTEIDS for flashing, etc	2012-12-11 12:40:24 +01:00
Adam Dunkels	aaa950ab17	Cooja platform changes to get IPv6/RPL to work better	2012-12-10 01:50:32 +01:00
Adam Dunkels	99f541e8fd	Updated to the latest uip-ds6-route API	2012-11-27 23:04:34 +01:00
Adam Dunkels	91206e2249	Avoid multiple definitions of NETSTACK_CONF_MAC. Turn on RPL by default.	2012-11-21 20:11:22 +01:00
Adam Dunkels	e178787999	Fixed compilation problems on the micaz and exp5438 platforms due to the node-id change	2012-11-20 21:16:50 +01:00
Adam Dunkels	ec8c7e9be0	Cleanup of the node-id.h files. The node-id.h file contains ... declarations of functions for setting and getting a node ID number, a functionality that exists on many platforms. Since this functionality was not considered part of the Contiki core, each platform defined its own node-id.h file. This commit attempts to clean this up by collecting the node-id.h into a core/sys/node-id.h file that replaces the old node-id.h files from the platform directories.	2012-11-20 19:59:46 +01:00
Mariano Alvira	03ab3fe317	Newer and cleaner TARGET=econotag as well as robust mc13224v ... configuration system. (also deprecate TARGET=redbee-econotag) - mc13224v now automatically probes hardware config for buck converter and 32kHz crystal as well as automatically monitors battery voltage and manages the buck accordingly. - new flashed based config system for mc13224v parameters such has radio modes (demod, autoack), nvmtype, mac address, channel and power. - considerably cleaned up econotag platform code (suffered from severe case of bit-rot)	2012-11-19 19:16:29 -05:00
Mariano Alvira	2c9a538582	Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into bump-libmc1322x ... bump libmc1322x to 7bee48243c Conflicts: cpu/mc1322x/board/Makefile.board cpu/mc1322x/lib/include/uart.h cpu/mc1322x/lib/uart1.c cpu/mc1322x/lib/uart2.c cpu/mc1322x/src/default_lowlevel.c	2012-11-18 18:27:39 -05:00
Etienne Duble	97da754b1c	Fixed login make target repeated in Makefile.mbxxx and Makefile.stm32w108	2012-11-09 15:43:15 +01:00
George Oikonomou	5399fa2b6f	cc2530dk: Fixed the startup text for dongle builds ... See Pull Request #21	2012-11-04 21:44:34 +00:00
George Oikonomou	53fdb96816	cc2530dk and Sensinode: Local copy of uip-debug.c ... Copied this file to the platform directories and changed it to use putstring(), puthex() etc so that we can print addresses without linking in printf See Pull Request #20	2012-11-04 21:43:57 +00:00
George Oikonomou	1a0f01ccc4	cc253x: Config to swap between UART and USB I/O ... See Pull Request #18	2012-11-01 17:41:57 +00:00
George Oikonomou	2cc74c5fd4	cc2530dk: Added a 'Serial over USB' platform process ... This is based on a usb-test example by Philippe Retornaz. It has been moved to platform and modified accordingly. With this in place: - putchar() can work over USB. So we can use things like printf, slip output - USB input can be redirected to slip or serial input The example itself is no longer needed in the source tree See Pull Request #18	2012-11-01 17:41:53 +00:00
George Oikonomou	c1d72475d7	cc253x: Renamed P2 interrupt-related files for better consistency ... See Pull Request #18	2012-11-01 17:41:38 +00:00
George Oikonomou	fea4970142	cc253x: Configurable linkage for the P2 ISR ... See Pull Request #18	2012-11-01 17:41:24 +00:00
Philippe Rétornaz	ba96408f37	cc253x: Add USB support to the compilation scripts ... See Pull Request #18	2012-11-01 17:41:21 +00:00
Philippe Rétornaz	ddc8120d7c	cc253x: Add p2 interrupt handler ... The P2 Interrupt is shared across many periferal (I2C, USB, GPIO). This adds a generic interrupt handler on which the differents drivers can register a handler. See Pull Request #18	2012-11-01 17:41:11 +00:00
George Oikonomou	67bf9ec10e	DOS EOL and indentation fixes (platform files) ... - Removed some DOS EOLs - Changed some tabs to spaces - Removed some trailing whitespaces Closes #6	2012-10-30 13:44:25 +00:00
Adam Dunkels	944537fccf	Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree	2012-10-26 15:54:49 +02:00
George Oikonomou	3b0e92168b	Copied cc2530 stack functions to the cc2430 port	2012-09-20 15:09:15 +01:00
George Oikonomou	b292e02012	Sensinode putdec() debugging	2012-09-20 15:09:15 +01:00
George Oikonomou	95b9d4ee29	Sensinode/cc2430 stack depth optimisation ... This replicates the method used by the cc2530 port	2012-09-20 15:09:15 +01:00
George Oikonomou	067fabe0f9	Sensinode main variable optimsations: ... r is now uint8_t, allocated to registers len is uint16_t for more efficent arithmetic (Changes replicated from the 253x port, originally contributed by Philippe Retornaz - EPFL)	2012-09-20 15:09:15 +01:00
George Oikonomou	cb168da729	Changed the cc2430 sleep_flag to uint8_t	2012-09-20 15:09:15 +01:00
Niclas Finne	4630945475	Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms	2012-09-19 22:49:19 +02:00
Niclas Finne	919ddfbf09	Added delay at startup to let things stabilize before writing to the uart	2012-09-19 22:47:48 +02:00
George Oikonomou	ee7af77ca9	Reworked the cc2530 stack debugging facilities: ... - Moved to their own file (so we can later copy the entire thing over to cc2430) - Renamed the functions (for naming convention reasons) - The entire thing can be enabled/disabled - Added a couple more macros - Hooked into main()	2012-09-07 17:40:17 +01:00
Philippe Rétornaz	780e62d7e8	cc253x: add putdec debug function	2012-09-07 17:32:54 +01:00
George Oikonomou	c6ec22c4c8	cc2530: Added a method to maximise stack depth ... This was oringinally contributed/reported/discussed/patched by Philippe Retornaz (EPFL) but it's implemented in a more configurable fashion here.	2012-09-07 17:32:53 +01:00
Philippe Rétornaz	a0d2988846	cc253x: Don't force __data usage ... SDCC optimize "r" and put it in a register. Don't force len to be in __data.	2012-09-07 17:32:10 +01:00
Philippe Rétornaz	666ff6ca55	cc253x: use a uint8_t for sleep_flag ... __bit variables must be located after the 0x20 address This force the stack to start after 0x20, thus decrease the stack size by a considerable amount.	2012-09-07 17:32:10 +01:00
George Oikonomou	8699f7741d	Fixed typos and a stray printf. Adjusted comments	2012-09-07 17:31:25 +01:00
Ivan Delamer	b43dad00b0	Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES ... #defines.	2012-09-04 11:12:18 -06:00
Antonio Lignan	c5e9d688a5	Fixed sht11 driver, now ensures the i2c bus is disabled when initializing	2012-08-16 14:12:27 +02:00
Antonio Lignan	73e7f25cbc	Simple phidget-like relay driver for the Z1 mote with basic functionalities	2012-07-30 11:27:13 +02:00
George Oikonomou	62fbd389d8	Renamed a cc253x SFRX to stop namespace conflicts ... The TR0 SFRX can not use the name TR0 because it conflicts with TCON.TR0 on the default 8051. See SDCC bug 3513300	2012-07-11 10:53:14 +01:00
David Kopf	37c407b177	Patch from Landon Fuller adds const to PROGMEM, required for newer avr-gcc	2012-06-10 12:54:11 -04:00
Niclas Finne	d1bef2b68a	Bug fix: setup MAC address based on node id if no MAC address was restored from external flash	2012-06-07 10:45:05 +02:00
Adam Dunkels	fd2e238d99	The __delay_cycles() function in the latest mspgcc takes an unsigned long argument but does not allow it to be larger than 65536.	2012-06-04 17:41:12 +02:00
Fredrik Osterlind	d270e4943d	bugfix: slip must be initialized after ctimer, as it uses ctimers	2012-05-30 12:59:42 +02:00
Niclas Finne	b6ed988709	Allow node address to be set by COOJA when emulating.	2012-05-29 19:42:35 +02:00
Niclas Finne	2c460090e3	io and signal have been moved into contiki include file	2012-05-29 19:31:16 +02:00
David Kopf	e0dab7c2fc	Prefer UART0 for stdout; move DEBUFGLOW macro below definition of uint8_t	2012-05-28 13:08:30 -04:00
Fredrik Osterlind	8ebacd1a1a	reverted previous patch that broke compiling on Instant Contiki	2012-05-25 11:25:19 +02:00
Fredrik Osterlind	50caa3650c	new experimental feature: possibility to change mote types when loading a simulation ... made compile dialogs only select mote interfaces specified in the loaded configuration	2012-05-23 14:59:41 +02:00
George Oikonomou	0fc5ec8d5c	Fixed an SDCC compile error when UIP_CONF_ROUTER is 0. UIP_CONF_ROUTER can be configured in project-conf.h	2012-05-16 15:22:31 +01:00
George Oikonomou	2f89f41b5a	cc2x3x RPL/non-RPL handling: ... - Relevant examples explicitly request it in their Makefile - Removed the definition of UIP_CONF_IPV6_RPL from contiki-conf.h. If needed, it's defined through a -D	2012-05-16 15:22:31 +01:00
George Oikonomou	259b497122	Minor Sensinode build cleanup	2012-05-16 15:22:31 +01:00
George Oikonomou	1f7171f943	Adjust cc2x3x ports to the new clock API	2012-05-16 15:22:31 +01:00
George Oikonomou	fea95ae088	Easily configure B2 on the cc2531 USB stick as a General-Purpose or Reset button	2012-05-16 15:22:31 +01:00
George Oikonomou	cc76c649b1	The cc2530 button driver would fail to compile if the user disabled button support	2012-05-16 15:22:31 +01:00
Antonio Lignan	6df9ffb731	Zolertia's light sensor ziglet	2012-05-11 13:39:59 +02:00
Fredrik Osterlind	4cf4a48592	minor bugfix: did not compile with PROCESS_CONF_NO_PROCESS_NAMES=1	2012-05-09 15:07:51 +02:00
Antonio Lignan	3dde89971c	Add disable function to I2C driver	2012-05-09 10:54:21 +02:00
Niclas Finne	40595ad5c7	Support for serialdump on MacOS X. Patch by Laurent Deru.	2012-05-07 13:16:27 +02:00
Laurent Deru	cc863e7bd4	Sky motelist support for MacOS X	2012-05-07 11:18:09 +02:00
George Oikonomou	6a808053ce	cc2531 Button 2 driver	2012-04-26 16:28:04 +01:00
George Oikonomou	5662b1f37d	Platform cc2530dk now uses models.h to configure differences between the SmartRF and the 2531 USB stick	2012-04-26 16:28:04 +01:00
George Oikonomou	38a222e83c	Redefined LEDS_ALL for cc2531s	2012-04-26 16:25:04 +01:00
George Oikonomou	c95fc4f360	cc2531 B1 support. B2 to come	2012-04-26 15:28:43 +01:00
George Oikonomou	26ae56fcaf	cc2531 LED support	2012-04-26 15:28:43 +01:00
George Oikonomou	1db1649b6a	The cc2530dk Makefile was adding a source twice ... Also, removed an obsolete comment	2012-04-26 15:28:43 +01:00
George Oikonomou	dd26accc07	We can now use SDCC's __nonbanked feature ... This allows us to reduce CODE footprint of SDCC projects built with --model-huge. Use carefully! * Added a facility which allows us to enable/disable the feature from the CPU dir (CC_CONF_NON_BANKED_OPTIMIZATION) * Added the CC_NON_BANKED keyword to some platform files (expands to __nonbanked) * Started using this for some examples	2012-04-26 15:28:43 +01:00
Adam Dunkels	b4e7468b12	Set CCA threshold before starting, to make ContikiMAC more efficient. Fix compilation problem with non-IPv6 compiles. Various style fixes.	2012-04-22 20:54:02 +02:00
George Oikonomou	e95f94a9a8	Added support for reading MAC from the cc253x flash ... We still use the primary location by default (Info Page) but this is now configurable. This change is useful for users who wish to specify their own MAC address. Since the Info Page is read-only, they need to be able to use the secondary location	2012-04-20 16:03:38 +01:00
George Oikonomou	29090a3dda	The cc253x Makefile specifies SoC flavor ... This will help us slowly add better support for smaller SoCs instead of just assuming that all cc253x SoCs are F256 - We build for F256 by default but the project Makefile can override this - We currently ignore this when passing --code-size. This is a ToDo - The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant	2012-04-20 16:03:38 +01:00
George Oikonomou	4a78021c62	Simplified the cc2530dk STARTUP_CONF_VERBOSE spaghetti and made it project-configurable	2012-04-20 16:03:37 +01:00
Niclas Finne	1b13b69814	Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611	2012-04-10 16:05:10 +02:00
David Kopf	cac4e9a222	Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t. ... Remove the troublesome avr/dev/delay.* files. Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE	2012-04-09 15:49:53 -04:00
George Oikonomou	b3de052e01	Ported the stack-friendly clock ISR code over from cc243x to cc253x	2012-04-03 16:26:10 +01:00
George Oikonomou	11a7f644ac	Comment rewording and formatting	2012-04-03 16:26:10 +01:00
George Oikonomou	ce17fa131c	Stack-friendly cc243x clock ISR enabled by default ... This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate as originally thought. In fact, it has pretty much the same accuracy as the old, stack-hungry version. * Renamed the define from CLOCK_CONF_ACCURATE (1: old) to CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying that one is more accurate than the other. * Using CLOCK_CONF_STACK_FRIENDLY by default.	2012-04-03 16:26:10 +01:00
simonduq	1fd7dcd2ef	mb* pltforms: reduce RAM footprint	2012-04-03 14:29:46 +02:00
simonduq	935460c25e	Fixed mbxxx's contiki-conf.h (bug reported by Konstantin Klubnichkin and Michal Krol)	2012-04-03 14:28:11 +02:00
simonduq	930c7c25bc	fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file, ... more printouts in main when ipv6 is used, and a target for memory profiling taking stm's gnu.ld static stack size into account	2012-04-03 11:47:30 +02:00
George Oikonomou	5240519dd9	Renamed a config define to better match contiki's naming philosophy	2012-04-02 11:38:54 +01:00
George Oikonomou	2d0d54c380	Removed obsolete #if config from cc2530dk's main ... Unlike cc2430, the cc2530 RF driver never generates interrupts. This configuration in main() was a remnant of the porting from the sensinode main, which does in fact need it. Also updated comments in contiki-conf to reflect that shortcuts don't influence the RF	2012-04-02 11:22:19 +01:00
George Oikonomou	977bc548f3	Renamed sensinode-debug to debug	2012-04-02 11:22:19 +01:00
George Oikonomou	bce34e4b9a	For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir. ... The value is not really configurable by the platform so having it in contiki-conf.h didn't make huge sense.	2012-04-02 11:22:19 +01:00
George Oikonomou	e02c287f15	Solved a text encoding issue	2012-04-02 11:22:19 +01:00
George Oikonomou	d958ee3125	Deleted the old Sensinode 'read mac from flash' routine. ... Since the introduction of a purpose-written routine, the old generic one (which was written in asm) was never being used. There was a configuration directive which allowed us to switch between the two. All references to this configuration directive have also been removed.	2012-04-02 11:21:32 +01:00
George Oikonomou	4f1e251603	Some uN_t had crept back in cc2530dk and sensinode. ... Changed to uintN_t plus a bit of code formatting	2012-03-29 13:10:10 +01:00
Joakim Eriksson	7482fd6962	quick fix for enabling native-border router to run under windows - need to cleanup the arguments	2012-03-27 11:09:54 +02:00
simonduq	946f00bf7b	stm32w: added ability to upload and reset all connected boards, and login using MOTE=x	2012-03-26 23:00:44 +02:00
George Oikonomou	ad256e5014	New platform: TI cc2530 Development Kit ... This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs Some initial support for cc2531 USB dongles	2012-03-23 14:41:07 +00:00
George Oikonomou	b7674c3636	Reincarnate the sensinode/cc2430 port	2012-03-23 14:41:07 +00:00
Matthias Kovatsch	d716ee55e7	Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki	2012-03-21 21:51:03 +01:00
Matthias Kovatsch	d57904b289	Fixed bug in IPv6 address print function.	2012-03-21 21:27:52 +01:00
simonduq	e4fb360262	stm32w platforms: contikimac support in the Rime case, with EUI-64	2012-03-20 17:30:59 +01:00
simonduq	0eb9a46e3a	stm32w platforms: contiki-conf cleanup and added platform-conf	2012-03-20 17:30:57 +01:00
simonduq	762097eb50	stm32w platforms: 64-bit rtimer causes a bug in arm-none-eabi-objcopy 2.18.50, use 32-bit rtimer instead	2012-03-20 17:30:45 +01:00
simonduq	7784cf7827	stm32w platforms: use 2 cca and default contikimac guard time	2012-03-20 17:30:05 +01:00
simonduq	5da4463236	adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La)	2012-03-20 17:29:58 +01:00
Fredrik Osterlind	862452b5b0	removed debugging output, code style	2012-03-13 14:17:43 +01:00
Niclas Finne	cf3827829d	Added resource definition for button, leds, and battery, and removed obsolete compiler setup	2012-03-09 20:35:49 +01:00
Fredrik Osterlind	97c7a55eea	simulating 1 ms turnaround time (before transmissions) by default, and no transmissions on channel busy	2012-03-09 14:58:13 +01:00
Fredrik Osterlind	e8294e8699	added objcopy external tools configuration ... changed nm command to sort numerically, and changed regexpressions to accept output from newer gcc versions added more debugging info under help menu	2012-03-09 14:57:21 +01:00
Niclas Finne	c2e07c9798	Improved support for the IAR compiler. ... io and signal have been moved into contiki include file.	2012-03-08 22:41:55 +01:00
Matthias Kovatsch	f67fb672eb	Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki	2012-03-08 00:49:25 +01:00
Matthias Kovatsch	87cd18539b	Eliminated RPL_CONF_ADJUST_LLH_LEN correction by using uip_l3_icmp_hdr_len instead of uip_l2_l3_icmp_hdr_len.	2012-03-08 00:48:04 +01:00
Niclas Finne	ff7a977dc7	Improved support for the IAR compiler for the MSP430 platforms	2012-03-07 23:09:05 +01:00
Niclas Finne	569477b10c	contiki-sky-platform is added by Makefile.sky	2012-03-07 23:07:57 +01:00
Niclas Finne	09e45cb12c	contiki-z1-platform is added by Makefile.z1	2012-03-07 23:07:47 +01:00
Niclas Finne	11fecd86da	Moved i2cmaster and adxl345 to contiki target source files	2012-03-07 23:07:28 +01:00
Niclas Finne	a8e8e6f51d	io and signal have been moved into contiki include file	2012-03-07 23:05:10 +01:00
Niclas Finne	684c3edfa6	Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood.	2012-03-07 23:04:52 +01:00
Ilya Dmitrichenko	1214086f97	Fixed TARGET=minimal-net compilation issues on Darwin.	2012-03-02 15:15:49 -05:00
Ilya Dmitrichenko	499d3052ee	Fixed TARGET=native compilation issues on Darwin.	2012-03-02 15:15:42 -05:00
David Kopf	79d65d2adc	Merge branch 'master' of git://contiki.git.sourceforge.net/gitroot/contiki/contiki	2012-02-25 10:17:57 -05:00
Ilya Dmitrichenko	4b60851527	Missed ifeq ...	2012-02-25 10:09:35 -05:00
Ilya Dmitrichenko	9c99d46e24	Simplified host OS platform detection in Makefiles	2012-02-25 10:09:33 -05:00
Mariano Alvira	008250afc6	econotag: increase UIP_CONF_RECEIVE_WINDOW to 300 for webserver nano	2012-02-24 12:19:05 -05:00
David Kopf	deb75d3d97	Several bugfixes	2012-02-21 11:14:52 -05:00
David Kopf	6e45dfe5ff	PROGMEM changes needed for newer avr-gcc compiler	2012-02-21 11:10:57 -05:00
Nicholas J Humfrey	680225e99d	Converted u8_t to uint8_t and u16_t to uint16_t in the platforms directory. ... Added "These names are deprecated, use C99 names" warnings the contiki-conf.h files that were missing it.	2012-02-21 08:33:25 -05:00
David Kopf	20a5c794dd	Move address initialization to after proce_init. Something in that now wiping the address array.	2012-02-11 15:19:28 -05:00
Fredrik Osterlind	aecb4b03cc	bug fix: rpl was not included correctly	2012-01-31 14:53:52 +01:00
Adam Dunkels	acb2c28fdd	small code style fixes; removed left-over function call	2012-01-25 06:41:39 -08:00
Adam Dunkels	cdfc788967	Increased wait time between main loop polls; cleaned up the code to Contiki code style standards; moved process autostart code to after network setup	2012-01-25 06:34:10 -08:00
Niclas Finne	aceb36c66b	Replaced SELECT_CALLBACK with an API that supports multiple select callbacks	2012-01-19 17:52:01 +01:00
Adam Dunkels	5e1946276b	Removed erroneous character from first line of file.	2012-01-18 12:37:03 -08:00
Adam Dunkels	959096ca67	Contiki port to the TI EXP5438 MSP430x5438a experimenters board	2012-01-18 07:27:59 -08:00
Adam Dunkels	465c401cdc	Reduce size of the neighbor table entries to make RPL fit into the Tmote Sky RAM.	2012-01-18 06:15:38 -08:00
Adam Dunkels	6185da7b80	Default to SMALL unless otherwise specified, to get size of binaries smaller so that Contiki with RPL/IPv6 fits on the Tmote Sky again.	2012-01-18 06:13:17 -08:00
Niclas Finne	42a7125ce7	fixed compiler warning	2012-01-17 21:47:48 +01:00
Niclas Finne	9ea5149433	The definitions for PxSEL2 are missing in some versions of mspgcc	2012-01-16 13:00:16 +01:00
Niclas Finne	1c6c4ba2f1	Added resource definition for button and removed obsolete compiler setup (compiler setup is now handled by cpu/msp430/msp430def.h)	2012-01-11 01:54:52 +01:00
David Kopf	58298f59db	Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal ... Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.	2012-01-10 12:42:27 -05:00
Niclas Finne	f3db12c19d	MSP430 setup for f2xxx based on Z1	2012-01-09 14:56:03 +01:00
Niclas Finne	9ffcd53868	Fixed compiler warning (with IAR compiler)	2012-01-09 14:56:00 +01:00
Niclas Finne	3daa822f89	Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc)	2012-01-09 14:55:57 +01:00
Niclas Finne	8aaa9d14b7	minor code cleanup	2012-01-09 14:55:51 +01:00
Niclas Finne	987b57b015	moved macros to implementation file, end-of-line normalization, code style	2012-01-09 14:55:43 +01:00
Niclas Finne	013571ed3f	* Removed __MSP430X__ (already defined by newer mspgcc4) ... * Commented out pragma not supported by mspgcc	2012-01-09 14:55:40 +01:00
Niclas Finne	866bc91e5a	enabled nullrdc autoack support	2012-01-09 14:55:37 +01:00
Niclas Finne	cdfa8708e3	* Added f2xxx for two series (for example z1) ... * f1xxx is baseline and always included * Cleaned up the names of uart and spi (no x in names) * Updated SPI configuration for WiSMote	2012-01-09 14:54:57 +01:00
Niclas Finne	f4f84ffca4	Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X	2012-01-09 14:54:01 +01:00
Niclas Finne	d1b22d40fa	leds setup for WiSMote	2012-01-09 14:41:45 +01:00
Niclas Finne	8aa1011c03	Removed explicit specification of data model small for IAR compiler. Data model small is default and this will allow projects to override the data model	2012-01-09 14:41:39 +01:00
Niclas Finne	708f9d77d2	Corrected timing for higher CPU speed	2012-01-09 14:41:36 +01:00
Niclas Finne	6c5379606b	Set node_id, disabled watchdog for now	2012-01-09 14:39:32 +01:00
Niclas Finne	05b10eb9ce	Initial WiSMote port based on code from Arago Systems.	2012-01-09 12:25:06 +01:00
Niclas Finne	367c82a5ab	added compiler flags and macros for IAR and mspgcc 4.4.5 compilers	2012-01-09 12:24:33 +01:00
David Kopf	b251619a2f	Add wpcap for cygwin/Windows native border router	2012-01-08 13:37:56 -05:00
Joakim Eriksson	5da8a9261b	fixed so that it works for non IPv6 applications	2012-01-06 03:59:43 -08:00
Joakim Eriksson	c3af79b795	Made native main loop sleep a bit more	2012-01-01 09:29:33 +01:00
Niclas Finne	8b83ffec67	Added native-border-router and slip-radio	2012-01-01 09:29:33 +01:00
Joakim Eriksson	0ea95c21b3	Added api for reading out tmp100 x100 temps	2012-01-01 09:29:10 +01:00
Niclas Finne	d14d90ea68	Moved variable definitions from header file	2011-12-20 05:09:31 +01:00
Niclas Finne	c0cf69ecbd	fixed compiler warnings	2011-12-20 05:09:28 +01:00
Niclas Finne	3661ff242e	io, signal and IAR-GCC checks have been moved into contiki include file	2011-12-20 05:09:16 +01:00
Nicolas Tsiftes	d0ebeb409e	Merge remote-tracking branch 'sf/master' into rpl-patch ... Conflicts: core/net/tcpip.c	2011-12-08 15:26:11 +01:00
Matthias Kovatsch	36763cabbd	Introduced PLATFORM_HAS_LIGHT, _BATTERY, and _SHT11.	2011-12-07 20:47:31 +01:00
Adam Dunkels	66c280039b	Removed obsolete platforms	2011-12-05 21:49:38 +01:00
Nicolas Tsiftes	0e32956a63	Merge remote-tracking branch 'sf/master' into rpl-patch	2011-11-21 14:59:31 +01:00
David Kopf	fb977cb9ef	Better fix for hardware FCS error on JTAG reset ... Correct silly error introduced by trying to save two bytes.	2011-11-15 13:24:58 -05:00
David Kopf	3612fdff5b	Add params.c to Raven and sync with 128rfa1 contiki-conf.h ... Contikimac works with mcu sleep on both platforms.	2011-11-14 11:56:34 -05:00
David Kopf	65032c4d35	Get better random seed on startup	2011-11-14 11:51:54 -05:00
David Kopf	bdd164e003	Reverse node_id bytes, patch from Geog von Zengen	2011-11-08 12:23:29 -05:00
Mariano Alvira	af4ef9531c	Add node_id to econotag	2011-10-25 10:09:28 -04:00
Niclas Finne	ed1780f9af	Removed quickstart rule for target 'clean' to avoid make warnings	2011-10-24 17:04:45 +02:00
nvt	d711887a1b	Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki	2011-10-10 22:11:52 +02:00
nvt	4f3528f7ed	Move compower configuration out of the non-IPv6 conditional clause.	2011-10-10 22:11:29 +02:00
Matthias Kovatsch	efeebe953c	Enabled UDP checksums for minimal-net	2011-10-10 14:25:03 +02:00
simonduq	dd8576830e	Added bursts support in CSMA/ContikiMAC, and CFS-swapping in ... queuebuf. Exemplified in examples/udp-stream.	2011-09-27 16:47:03 +02:00
Joakim Eriksson	5b1d9617c4	moved io and signal and IAR-GCC checks from driver files into contiki include file	2011-09-26 10:38:41 +02:00
Joakim Eriksson	95dde73618	fixed Sky platform for IAR compiler	2011-09-11 17:18:02 +02:00
David Kopf	f721f646fa	Adjust sleep time by ticks instead of seconds, proposed by Ivan Delamer	2011-09-10 12:44:49 -04:00
Mariano Alvira	3e5afa2b59	replace MAC_CONF_CHANNEL_CHECK_RATE with ... NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE for redbee-dev and econotag Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)	2011-09-06 07:49:23 -04:00
Adam Dunkels	eeb25b9667	If no MAC is defined, create one from the node ID	2011-09-05 22:04:06 +02:00
Adam Dunkels	8fee2a507c	Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)	2011-09-05 20:43:10 +02:00
Adam Dunkels	0f8145c78b	Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)	2011-09-05 20:43:01 +02:00
Adam Dunkels	25c28e06cc	Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)	2011-09-05 20:42:12 +02:00
Adam Dunkels	a06cf93e4c	Made the sky and z1 platform handling of PROJECT_CONF_H the same as the other platforms: the makefile should define PROJECT_CONF_H to be the name of the header file to include. This header file should #undef everything it #defines, as it is included after all the other configuration options in contiki-conf.h	2011-09-05 11:46:15 +02:00
Adam Dunkels	ee75ec3ced	Be a little more conservative in terms of what headers not to compress	2011-09-05 11:41:41 +02:00
Mariano Alvira	6c0bbc492b	change mc1322x rtimers to 32-bit ... hardcode a close default value for the RTC	2011-09-02 12:32:47 -04:00
Adam Dunkels	6c607b702a	Use the SICSLOWPAN_CONF_COMPRESSION_THRESHOLD to avoid compressing IPv6 packets smaller than 60 bytes. This allows us to use ContikiMAC without its header, making it 802.15.4 compliant again.	2011-09-02 13:52:19 +02:00
Adam Dunkels	add8367947	Include stdlib.h for the NULL macro	2011-08-31 21:56:28 +02:00
David Kopf	3520cc0bae	flash led on tcp get, fix pingbacks on rpl build, patch web data for params	2011-08-31 12:13:31 -04:00
David Kopf	36b290a1cd	Refactor with params.c, h	2011-08-31 11:47:17 -04:00
David Kopf	d2aece89ef	Add settings manager with program flash defaults, random routine, periodic prints with ENERGEST, node-id.	2011-08-28 16:22:39 -04:00
David Kopf	bdec65b889	Fix typos and file endings	2011-08-28 16:04:36 -04:00
David Kopf	9fec648b3e	Allow selection of slip port	2011-08-25 14:43:18 -04:00
David Kopf	dff77aea61	Correct typo	2011-08-25 14:37:12 -04:00
David Kopf	94fc40f736	Move LEDONPORTE1 define to contiki-conf.h, fixing typo.	2011-08-24 11:35:58 -04:00
David Kopf	3c18372939	Add periodic prints and stack monitor	2011-08-24 10:55:58 -04:00
David Kopf	b55dddcd38	Free rtimer for contikimac, add print-stats option	2011-08-15 14:55:18 -04:00
David Kopf	83e3b99d54	Let RPL examples enable platform RPL	2011-08-15 14:45:44 -04:00
David Kopf	50d1086553	Add changes needed for contikimac	2011-08-13 11:38:38 -04:00
David Kopf	ea1345d3fe	Update to proper webserver define	2011-08-13 11:36:43 -04:00
David Kopf	f36c97a9a4	Get random seed from noisy ADC conversion at startup.	2011-08-13 11:31:20 -04:00
Adam Dunkels	40bf585af8	The Z1 platform has LEDs	2011-08-08 22:46:30 +02:00
David Kopf	c9b19ce655	Change timer setups for arbitrary CLOCK_CONF_SECOND ... Change raven to 128 ticks and enable 32KHz crystal as default.	2011-08-05 15:14:35 -04:00
David Kopf	96c3c1093a	Assign aaaa:: prefix if HARD_CODED_ADDRESS not defined	2011-08-03 12:30:20 -04:00
David Kopf	6ae3e2bcb2	Restore micaz/dev/clock.c, mysteriously renamed to iris/dev/sensors/battery-sensor.c	2011-08-03 11:44:22 -04:00
David Kopf	e2ad2acde4	Add stk500 platform and changes suggested by Daniel Willmann	2011-08-03 11:18:55 -04:00
David Kopf	44f4ee9315	Use PROCESS_NAME_STRING macro to handle NO_PROCESS_NAMES	2011-08-03 11:08:40 -04:00
David Kopf	6ec85fe079	Add Iris port of Shinta Hatatani	2011-08-03 10:17:59 -04:00
Adam Dunkels	8962136b1a	Added a motelist target that is the same on both sky and z1	2011-07-29 13:06:00 +02:00
Adam Dunkels	aedf4fe8b5	Made ContikiMAC/8 default on z1 platform; enabled power profiling by default	2011-07-29 13:05:36 +02:00
David Kopf	0774fef827	Add explicit RADIOSTATS to platform contiki-conf.h	2011-07-25 15:12:12 -04:00
David Kopf	05c11d362b	Clock seconds since startup on minimal-net	2011-07-24 11:53:36 -04:00
David Kopf	0bb585fd60	Replace WEBSERVER by AVR_WEBSERVER	2011-07-24 11:43:17 -04:00
HATATANI Shinta	11d6bc78c5	some fix	2011-07-19 16:21:41 +09:00
Mariano Alvira	697af5ef08	adding tmp102 sensor for the econotag from Hedde Bosman. ... This can be pulling in as a common driver if we can make a generic i2c Contiki driver.	2011-07-18 07:30:49 -04:00
HATATANI Shinta	3c168cc395	merge iris and micaz	2011-07-17 10:36:35 +09:00
HATATANI Shinta	94a6f4087c	some trivial change	2011-07-15 16:36:25 +09:00
HATATANI Shinta	a7d713d253	Now iris port works with tunslip6 (Thanks to Suhas K)	2011-07-15 16:36:25 +09:00
HATATANI Shinta	f4740a062a	IRIS port is working with uIPv6	2011-07-15 16:36:25 +09:00
HATATANI Shinta	9a201f6934	create iris directory	2011-07-15 16:36:24 +09:00
David Kopf	6355545ded	Add template for AUTOSTART_PROCESS	2011-07-11 11:34:04 -04:00
Vincent Brillault	dc9cbe647d	Changes in RPL implementation : ... - Structural modification of RPL data storage. - Support multiple gateways (multiple DODAG-ID with a unique InstanceID) - Use Lollipop counters - Add leaf-only configuration option for RPL Bugfix : - Correctly send "Grounded" flag in DIO	2011-07-11 16:52:45 +02:00
Mariano Alvira	e80f9eb4b5	mc1322x: build fixes for uart2	2011-07-08 19:40:42 -04:00
Niclas Finne	4b26f92e04	Added platform configuration files with resource definitions for the JCreate and Sentilla USB platforms	2011-07-01 17:18:57 +02:00
Niclas Finne	1d07330ac0	Made the platform config file configurable.	2011-07-01 17:16:12 +02:00
Niclas Finne	d635c03b52	Fixed bug when reading temperature (abstemp was not always set).	2011-06-30 18:16:35 +02:00
David Kopf	6ea7250af7	Change ctimer startup order, add multihop to wpcap and minimal-net platform.	2011-06-30 12:12:07 -04:00
David Kopf	46de21e771	Allow ipv6 builds on win32 platform. (webserver6 builds with cygwin, needs changes for VC++ compiler)	2011-06-28 08:24:23 -04:00
David Kopf	c48b7ab78d	Add RPL nodes and border router to minimal-net platform (cygwin only)	2011-06-28 08:19:48 -04:00
dak664	d6db9e4e86	Add project-conf.h to platform contiki-conf.h files. ... Fix jackdaw comments.	2011-06-08 09:12:57 -04:00
Niclas Finne	dc426d789b	msp430.h has been merged with msp430def.h for code to compile with IAR compiler	2011-06-07 18:54:57 +02:00
Joakim Eriksson	af601dfb23	improved support for IAR compiler for z1	2011-06-05 00:21:47 +02:00
Mariano Alvira	cb29a9c667	add leds and button capabilities to the econotag.	2011-05-27 11:01:54 -04:00
Joakim Eriksson	77ec0bfa0f	fixed the z1 platform and generic code used by z1 to work with IAR compiler	2011-05-25 17:21:51 +02:00
Niclas Finne	374722b2e0	Added resource definition for leds and button	2011-05-20 14:27:53 +02:00
dak664	55c1ce6e93	Fix ip4 hello-world build	2011-05-18 11:09:16 -04:00
Niclas Finne	41dd2d09f4	Added missing include	2011-05-10 15:28:30 +02:00
Mariano Alvira	e2d9082fc7	factor maca hw autoack and nullrdc hw autoack config	2011-05-08 09:50:57 -04:00
Mariano Alvira	65671c66c6	turn on insert ack packet by default	2011-05-08 09:50:57 -04:00
Salvatore Pitrulli	6e20a4c0ce	Added missing include.	2011-04-27 18:12:23 +02:00
Salvatore Pitrulli	5eabf33211	Added functions for deep sleep to mbxxx platform.	2011-04-27 18:12:23 +02:00
Salvatore Pitrulli	01a7a78a94	Fixed temperature ADC conversion bug on mbxxx. ... The conversion was made from an incorrect source when the GPIO pin was not PB7. Added functions and macros used to select the correct ADC channel.	2011-04-20 18:06:20 +02:00
Salvatore Pitrulli	aa968309af	Merge remote branch 'sf/master'	2011-04-16 16:27:10 +02:00
Salvatore Pitrulli	738c5dcd4b	Files for platform mbxxx. ... MBXXX is a fake platform that actually include all the platforms based on STM32W108 microcontroller. Detection of the board is made at runtime, at the expense of code size.	2011-04-14 08:11:54 +02:00
Salvatore Pitrulli	80605d4045	Change from DEV to PORT in login command for mb851. ... DEV variable was already used in Makefile.include.	2011-04-14 08:07:15 +02:00
Salvatore Pitrulli	af8e58e063	Set LED pins to output when MB851 is in sleep mode. ... This reduces power consumption.	2011-04-13 18:14:12 +02:00
Oliver Schmidt	b19fb0ac9e	Activate Telnet-server GUI-support only for project builds.	2011-04-10 17:08:50 +02:00
Oliver Schmidt	c6c0d6247b	Merge remote-tracking branch 'origin/master'	2011-04-10 13:23:13 +02:00
Oliver Schmidt	7c3adef1c8	Added dependency handling and README.VC	2011-04-10 13:21:39 +02:00
Oliver Schmidt	f2678ff7b4	Renamed README to README.1X	2011-04-10 12:43:24 +02:00
Oliver Schmidt	199d51275d	Removed section about (recently deleted) VC solution file.	2011-04-10 12:38:11 +02:00
dak664	2e14df3981	Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6.	2011-04-08 15:15:16 -04:00
Salvatore Pitrulli	6655c876f2	Added functions and example for deep sleep on mb851. ... The added function let a process to make the system go into deep sleep for maximum power saving. The udp-ipv6-example shows how to use these new functions.	2011-04-08 11:53:48 +00:00
Niclas Finne	236c459ecf	Added missing include	2011-04-07 09:26:12 +02:00
Oliver Schmidt	eadd74ae5f	Removed VC++ project files. ... Being able to build about any Contiki project in the WIN32 target using VC++ is _so_ much more useful than those project files not integrated in any way into the Contiki build system.	2011-04-03 22:37:03 +02:00
Oliver Schmidt	5da4faf71e	Allow VC++ to be used as alternative to GCC for building in the WIN32 target. ... TODOs: - Update README - Add dependency handling - Add rtimersupport	2011-04-03 22:32:11 +02:00
Oliver Schmidt	f83fb3704b	Replaced make-empty-symbols with empty-symbols.[c|h] ... The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.	2011-04-03 13:24:58 +02:00
Oliver Schmidt	4a731dfda9	Allow for non-GUI win32 apps.	2011-04-03 10:56:18 +02:00
dak664	4e8b4e408c	Temporary fix for RNDIS enumeration before the mac address is set up. ... (Turn on RS232 debug to bypass the enumeration wait and let the mac address get set first)	2011-03-27 14:21:47 -04:00
Enric M. Calvo	4ba4d55e34	cleaned up main	2011-03-26 10:15:49 +01:00
Enric M. Calvo	aba380b960	removed modif. to sky files	2011-03-25 17:57:17 +01:00
Enric M. Calvo	1716d837fc	Merge branch 'master' of git://contiki.git.sourceforge.net/gitroot/contiki/contiki into master_cleanup ... Makefile.z1 is broken into .common and .z1 to share it with Z1 Starter Platform Conflicts: .gitignore platform/z1/Makefile.z1	2011-03-25 17:46:38 +01:00
dak664	fcb41fa5c2	Refactor with settings manager and better usb enumeration for debug prints	2011-03-23 18:10:49 -04:00
dak664	a9cbbb4570	Add sneezer mode and tx power change	2011-03-23 18:08:07 -04:00
Mariano Alvira	0af24040f1	econotag: add an option to use the watchdog timer	2011-03-22 16:35:54 -04:00
Salvatore Pitrulli	45db1a6faf	Reduced uip buffer size in order to compile all the examples.	2011-03-22 19:35:50 +01:00
Salvatore Pitrulli	eb588f1aec	New HAL and SimpleMAC for STM32W108.	2011-03-22 19:35:49 +01:00
Niclas Finne	ccc1687319	Made energest configuration configurable	2011-03-21 21:28:43 +01:00
dak664	5dd7500d0b	Add configurable auto cca threshold and implement driver cca call. ... Show smallest rssi in jackdaw menu.	2011-03-21 11:10:30 -04:00
joakime	7984ec38ce	fixed so that accelerometer is initialized and the isr vector is included	2011-03-16 13:56:29 +01:00
Mariano Alvira	59768e7bc7	econotag: fix problem with how IAB based mac addresses are formed	2011-03-13 17:48:47 -04:00
dak664	16a73eafd9	Use uip-debug.h defines and print routines ... Add print to show cause of startup	2011-03-13 14:07:17 -04:00
dak664	533a827adb	Defines need to be above their use in a conditional test	2011-03-11 16:28:02 -05:00
dak664	abf6f1a153	Include objects needed for slip rpl border router build	2011-03-11 15:08:55 -05:00
dak664	e4fcd7ebd7	Add files needed for slip rpl-border-router build.	2011-03-11 14:16:27 -05:00
dak664	02091b083a	MAC address to EEMEM, not PROGMEM ... Sync atmega128rfa1 main routine to the raven (timed route prints, etc.)	2011-03-11 13:47:47 -05:00
dak664	69da4c8cfa	Fix unresolved references when built without webserver and/or tcp. Changes suggested by Harald Pichler.	2011-03-10 10:57:43 -05:00
dak664	ad67c573de	Fix unused variable warning	2011-03-10 10:37:15 -05:00
dak664	de7bcda99f	avrdude and makefile changes suggested by Georg von Zengen	2011-03-08 13:07:00 -05:00
Enric M. Calvo	127a3d03ad	Added IPv6 z1-websense demo w/MSP batt&temp sensor	2011-03-08 09:27:38 +01:00
Enric M. Calvo	13ff778d73	added temperature-sensor to Makefile.common	2011-03-08 09:20:35 +01:00
Enric M. Calvo	7fc41e1706	M Makefile.common to add tmp102 sensor by default	2011-03-07 21:23:58 +01:00
Niclas Finne	a199ae920e	Changed the order in which io.h and signal.h is included. Some versions of mspgcc4 seem to have a problem when signal.h is included before io.h.	2011-03-07 20:54:02 +01:00
Niclas Finne	ccc0a3f7c4	Changed LEDS_ALL to 8 leds for the JCreate platform	2011-03-07 20:12:26 +01:00
Fredrik Osterlind	dd7cec737d	removed obsolete leds_[color]() functions, replaced by leds_{on,off}() ... allow LEDS_[COLOR] to be configured by platform-conf	2011-03-03 17:48:32 +01:00
Enric M. Calvo	0c6fd04f44	Modified contiki-conf.h and added sensys-scanner.	2011-03-03 13:44:28 +01:00
Fredrik Osterlind	499c13a357	removed execute flag of source files (avoids diff problems with egit)	2011-03-01 18:16:42 +01:00
dak664	7f3c198a78	Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki	2011-02-28 16:32:48 -05:00
dak664	1e7479f8e4	Add periodic print of stack monitor and neighbors/routes. ... Refactor PRINTFs.	2011-02-28 16:26:28 -05:00
Enric M. Calvo	701a42e239	Added dummy light driver. Now skywebsense likes Z1 ... The light sensor driver is mapped to the same pin as the potentiometer in Z1 Starter Platform. sky-websense is untouched, though.	2011-02-27 21:28:25 +01:00
Enric M. Calvo	414d926966	Sky-websense compiles for Z1 (testing)	2011-02-27 20:10:09 +01:00
Enric M. Calvo	02d097674c	Corrected contiki-conf.h to include project-conf.h	2011-02-27 20:00:45 +01:00
Enric M. Calvo	a779cb4d0d	XXX Interrupts by cc2420 & adxl345 compatible now ... Still remains to be seen why i2cmaster.c and adxl345.c need to be added in the Makefile.common at the very beginnig with the env. var. PROJECT_SOURCEFILES += i2cmaster.c adxl345.c	2011-02-27 18:02:12 +01:00
Enric M. Calvo	18e1f92f0e	Set QUEUEBUF_CONF_NUM to 4 to avoid .data overflow	2011-02-27 17:52:00 +01:00
Enric M. Calvo	fc51115ace	optional lines in Makefile.common	2011-02-27 17:14:27 +01:00
Enric M. Calvo	e0882d7769	corrected adxl345, ISR was not disabled, now it is.	2011-02-27 13:09:14 +01:00
Enric M. Calvo	404b735cc4	Fixed radio and contiki conf to get RIME working ... cc2420 isr handled at cc2420-arch, disabled accel. interrupts and modified platform/z1/contiki-conf.h to use same mac as sky. Added example-broadcast-button, sends packets every second or when button pushed. Works with other Z1s and Sky	2011-02-27 12:35:19 +01:00
Enric M. Calvo	9acdb98a56	Added a quick sht11 sensor driver support for Z1 ... Support for Sensirion SHT1x/SHT7x support is adapted from core for Z1 in the Ziglet port. XXX TODO: + Remove SHT11_PWR + Lines are shared with I2C, hence port reconfiguration must be added at the driver level.	2011-02-26 12:41:56 +01:00
Enric M. Calvo	f1fe8782b0	Removed unwanted files	2011-02-25 16:29:55 +01:00
Enric M. Calvo	44ce1699f2	Definition of Z1 Starter Platform in contiki/platforms + LEDs + Potentiometer	2011-02-25 16:08:50 +01:00
Enric M. Calvo	3ec4143252	Added Potentiometer sensor in Z1 Platform	2011-02-25 16:01:40 +01:00
Enric M. Calvo	43db4fd10e	Added MAC overwriting/burning capability to the Z1 ... Added compilation parameter "nodemac=1234" that can be used to overwrite the MAC at compilation time, and that combined with the burn-nodeid app can record a prestablished MAC on ext. mem.	2011-02-25 15:35:41 +01:00
Enric M. Calvo	659f36eb79	Updated *-sensor.c files from the sky platform. ... Fixed battery-sensor plus added simple test (XXX)	2011-02-25 15:35:41 +01:00
Mariano Alvira	05a4961604	econotag: generate EUI64 mac adresses properly	2011-02-23 15:20:08 -08:00
Mariano Alvira	e9c904a74c	econotag: turn DEBUG off by default	2011-02-23 15:19:44 -08:00
Mariano Alvira	c2c70a22df	mc1322x: setup hardware addresses and enable AUTOACK mode if ... configured	2011-02-23 15:19:44 -08:00
Mariano Alvira	e826ccd3b9	add NULLRDC_CONF_802154_AUTOACK_HW for radios that only pass-up NOACK ... status but not the actual ack packet.	2011-02-23 15:19:44 -08:00
dak664	ef4bb08c3e	Add stack monitor. Change internal uip address to 200 for RPL.	2011-02-23 14:14:21 -05:00
Lionel Debroux	5cb49e8b07	Several compiler warning fixes: ... * msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h; * sky: fix a couple pointer target signedness warnings; * core: fix several signed/unsigned comparison warnings; * framer-802154: "const static" -> "static const" to fix compiler warnings; * core: comment or remove unused variables and function definitions. Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr> Signed-off-by: Mariano Alvira <mar@devl.org>	2011-02-20 19:28:14 -05:00
Enric M. Calvo	1b2878baa4	Corrected some typos in the PORT1 ISR function.	2011-02-16 12:02:36 -05:00
Fredrik Osterlind	747eafd5f0	support for tinyos style node ids, to simplify testbed experiments ... with automatic node ids	2011-02-11 15:27:14 +01:00
Fredrik Osterlind	a501816472	example of adding cooja-platform mote interface manually	2011-02-11 15:23:59 +01:00
Nicolas Tsiftes	39ea9405bb	Added a function for setting the I/O semantics on a Coffee file descriptor. Changed the configuration parameters slightly and updated the platform definitions to reflect this change.	2011-02-09 15:03:57 +01:00
Mariano Alvira	ad200384ac	add a dummy light sensor for econotag	2011-02-08 09:07:45 -05:00
Mariano Alvira	227b72c88d	add dummy node-id.h for econotag	2011-02-08 09:07:34 -05:00
Mariano Alvira	9572baa71b	fix mc13224v led driver to only touch gpio used for leds.	2011-02-08 09:07:11 -05:00
Mariano Alvira	dbe6407a22	change mc13224v button-sensor to use gpio structs	2011-02-08 09:07:03 -05:00
dak664	bbcd43a9aa	Merge branch 'master' of github.com:adamdunkels/contiki-2.x	2011-02-07 15:14:54 -05:00
dak664	71612fd6a4	Replace file, some problem with my local master line endings.	2011-02-07 15:12:54 -05:00
dak664	b33b89216f	Delete obsolete file	2011-02-07 14:35:19 -05:00
dak664	574feaa866	Test web-based commit, see if it fixes the line endings.	2011-02-07 11:25:07 -08:00
dak664	574927c776	Delete obsolete file	2011-02-07 14:07:37 -05:00
dak664	519cce0019	Add comments, bugfixes, merge avr-atmega128rfa1 platform changes to avr-raven	2011-02-07 14:06:53 -05:00
dak664	62b894e560	Add avr-atmega128rfa1 platform based on Michael Hartman's board (single LED peripheral)	2011-02-07 13:15:21 -05:00
David Kopf	ceea35f7a8	Test TortoiseGit commit from Vista laptop	2011-02-04 10:41:18 -05:00
David Kopf	16df31b143	Merge branch 'master' of https://github.com/adamdunkels/contiki-2.x	2011-02-04 10:39:34 -05:00
dak664	0b23116c30	Test TortoiseGit commit from windows 7	2011-02-04 09:03:03 -05:00
David Kopf	c18d12e8a4	Test git commit	2011-02-03 18:29:17 -05:00
oliverschmidt	10a7bb2579	Made Atari build compabile with make.exe from GnuWin32 and cmd.exe. cmd.exe comes with a builtin mkdir which doesn't understand -p. However -p isn't necessary as long as the disk creation works - and therefore the directory is successfully deleted.	2011-01-23 16:25:45 +00:00
nvt-se	375e1d76ef	Print the error if select fails	2011-01-21 14:19:57 +00:00
enricmcalvo	594d033c04	Added device drivers for tmp102 sensor for the Zolertia Z1 platform.	2011-01-20 10:28:00 +00:00
nifi	3d28da8813	Coffee no longer uses watchdog calls	2011-01-18 15:49:37 +00:00
nifi	1e69c4c795	Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up	2011-01-18 15:48:38 +00:00
nvt-se	9ad02dbdd8	Removed header inclusion	2011-01-18 14:58:39 +00:00
nvt-se	28421f1fe2	Removed watchdog calls from Coffee	2011-01-18 14:06:33 +00:00
nvt-se	00ac8cfaa0	Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up	2011-01-18 14:03:55 +00:00
adamdunkels	34f2d3e025	Disable timesynch by default - it is not well-tested enough yet.	2011-01-09 21:04:14 +00:00
adamdunkels	a6fe42f60f	Restart CC2420 SFD interrupt after DCO calibration only if it is enabled.	2011-01-09 21:03:42 +00:00
nvt-se	4003c3a8c9	do2unix conversion	2011-01-05 17:02:15 +00:00
joxe	2e1c856741	added support for avoiding sleeping in LPM3 when DCO needs to be running - needed for uart DMA	2011-01-05 12:04:23 +00:00
dak664	90a6d768ea	Keep track of sleeptime and display on status web page.	2010-12-23 19:41:07 +00:00
dak664	013c3ac2f8	Remove contitional on clock updating, it should always be done after a sleep!	2010-12-22 17:09:03 +00:00
dak664	44a2e34005	Resolve TIMER2 conflict between sleep and possible clock usage.	2010-12-22 16:50:30 +00:00
dak664	7b7ad4336e	Send text following ? in GET to Raven LCD	2010-12-20 20:06:06 +00:00
dak664	ac68ced90a	Add polyphonic ringtones for received messages.	2010-12-20 20:03:56 +00:00
dak664	8af150ec0b	Send temperature and voltage to 1294p webserver on startup by default.	2010-12-20 19:58:42 +00:00
dak664	b87694e272	Update documentation	2010-12-19 17:13:29 +00:00
dak664	6d1c060564	Modify menu chart for sleep and doze, add raven picture for doxygen	2010-12-19 17:12:13 +00:00
dak664	b438b78097	Fix configuration for RPL build (no packet queuing, default no TCP)	2010-12-18 22:37:02 +00:00
dak664	9575daede2	Add working cx-max configuration values.	2010-12-18 20:53:36 +00:00
dak664	d378d891c8	Add working cx-mac configuration values.	2010-12-18 20:46:14 +00:00
dak664	89d0ffffd2	Save radio ontime when webwser displays current cpu ontime for later display of corresponding value after possible TCP delays.	2010-12-18 20:44:02 +00:00
dak664	8586643d14	Implement SLEEP and DOZE commands from the 3290p menu. ... Define serial commands the same as the 3290p for grepping.	2010-12-18 20:40:45 +00:00
dak664	555fab59a3	Add SLEEP and DOZE functions to the menu. ... Give serial commands the same defines as in the 1284p for grepping.	2010-12-18 20:35:58 +00:00
adamdunkels	e55c3cd471	Enable DCO configuration override	2010-12-16 22:52:27 +00:00
adamdunkels	37e65264a8	Hack: reenable cc2420 SFD interrupts after resyncing the DCO. The DCO code currently messes up the SFD interrupt settings.	2010-12-16 22:52:12 +00:00
adamdunkels	6a80106236	Turn on timesynch by default	2010-12-16 22:51:22 +00:00
dak664	aa7ad8c807	Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.	2010-12-15 16:50:44 +00:00
nvt-se	404230a047	Added a macro for portable watchdog calls.	2010-12-15 14:01:07 +00:00
salvopitru	5f40a5d63e	Added serialdump utility from sky folder to stm32w folder. It has one more option for limiting upload speed.	2010-12-15 11:18:09 +00:00
dak664	ced88c2eff	Give jackdaw fe80::0 address and number webservers from fe80::1	2010-12-14 23:22:01 +00:00
dak664	1d2a5ca671	Minor format and comment changes	2010-12-14 22:51:04 +00:00
dak664	d8fe44645c	Refactor, tune, add SICSLOWPAN_CONF_ACK_ALL defines for testing radio acks	2010-12-14 22:39:38 +00:00
dak664	a9dedfee4f	Refactor contiki-conf files, remove obsolete defines.	2010-12-13 23:31:13 +00:00
dak664	e06dada659	Update platform build for hello-world, includes patch from Tobias Sch�fer	2010-12-05 20:21:19 +00:00
dak664	8e38f5ee34	Fix comment, add WEBDIR=default to force rebuild with default web content	2010-12-05 17:32:50 +00:00
dak664	35b2ce0cdb	Add status page link, show correct rssi, fix indexing off array in ipv4 builds	2010-12-04 21:32:35 +00:00
kasunch	753cd22d56	Changing line ending to LF	2010-12-04 08:22:10 +00:00
dak664	1ca7f7f940	Apply patch from Tobias Sch�fer to enable hello-world build. Untested otherwise.	2010-12-03 21:39:33 +00:00
dak664	58b7a19803	Hardware/software radio HAL patch from Roger Larsson. ... Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26. Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.	2010-12-03 20:42:01 +00:00
dak664	09c45f0497	Add address, neighbor, routes cgi's	2010-12-02 15:37:13 +00:00
dak664	6f66d45917	Add status web page with addresses, neighbors, routes	2010-12-02 15:28:38 +00:00
dak664	30885ba4ce	Do clock init before any RS232 output	2010-12-01 16:30:34 +00:00
dak664	3d3ad9e2c2	Fixes to allow ipv4 (hello world) builds	2010-12-01 16:23:55 +00:00
dak664	c027c1664a	Informative error when bogus platform is used in a contiki build	2010-12-01 15:09:06 +00:00
zhitao	af7b81efdb	resolved conflict with type declaration	2010-12-01 10:19:58 +00:00
dak664	5a4fa388da	Refuse to play ping-pong with host interface	2010-11-29 21:22:41 +00:00
dak664	0735b431aa	Enable RPL neighbor webserver page	2010-11-29 21:21:36 +00:00
dak664	dc028b3f85	Get rssi correctly in either rx mode, clean up radio driver debugging	2010-11-26 20:39:15 +00:00
adamdunkels	353bb07cc9	Changed the RDC rate configuration name to the new configuration name	2010-11-26 12:09:04 +00:00
dak664	880233a451	RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.	2010-11-24 18:46:57 +00:00
nifi	3bd78893e5	Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc. ... nullrdc (previously nullrdc-framer) is now a RDC implementation that does not do any radio duty cycling but supports link layer addresses and frame format via framer (for example 802.15.4). nullrdc can now be used in the same way as contikimac, xmac, etc. nullrdc-noframer (previously nullrdc) is a null RDC implementation that does not do any radio duty cycling, does not add any header of its own to the packets, and does not support link layer addresses.	2010-11-23 18:11:00 +00:00
dak664	da8ad17c02	Save 256 bytes of RAM by excluding floating point routine	2010-11-21 17:56:36 +00:00
dak664	b3324c6d23	Add menu option to temporarily disable RS232 debug output for higher 6lowpan throughput. ... Functional rpl with RNDIS/Ubuntu (tested on Raven single hops)	2010-11-19 20:02:25 +00:00
dak664	c6c81acede	Add optional pings to google and cisco	2010-11-19 19:44:10 +00:00
dak664	fe19719a16	Fix printf_P error	2010-11-18 14:33:10 +00:00
adamdunkels	9446d37285	Increased the default Cooja CFS size to 4000 bytes so that examples work (found by Roger Larsson)	2010-11-15 21:44:37 +00:00
enricmcalvo	f4c1953563	Added temporary definition of P1SEL2 for those mspgcc4 without complete port register definitions.	2010-11-14 21:59:02 +00:00
dak664	cc7fea92d2	Force ipv6 when building with fakeuip	2010-11-13 16:28:46 +00:00
dak664	72d49c20af	Allow non-ipv6 build (hello world)	2010-11-12 20:49:03 +00:00
dak664	9e94ba9803	Allow non-ipv6 build, e.g. Hello World	2010-11-12 17:15:00 +00:00
fros4943	0a8d898678	#ifndef'd elfloader's default memory usage	2010-11-11 13:56:02 +00:00
enricmcalvo	436e4dce1c	Updated accelerometer drivers to avoid conflicts with radio transceiver.	2010-11-10 13:46:39 +00:00
fros4943	3563089a91	reimplemented initial support for referencing contiki source files in cooja projects	2010-11-10 13:11:43 +00:00
maralvira	5b4c63440b	fix typos	2010-11-09 01:30:38 +00:00
oliverschmidt	7432afa036	Both apps/webbrowser and apps/webserver contain a http-strings.c so the object files generated overwrite each other. However, currently webserver/http-strings.c is a clean superset of webbrowser/http-strings.c so using only that one even in the www.prg project makes things (sort of) work.	2010-11-07 23:36:34 +00:00
maralvira	24b6071234	change maca_raw_mode to contiki_maca_raw_mode	2010-11-07 18:39:39 +00:00
maralvira	3747f9a7c5	use the nullmac and nullrdc with framer layer.	2010-11-07 18:36:52 +00:00
maralvira	e029fa8da0	fix defines for raw mode	2010-11-07 18:34:52 +00:00
maralvira	8cd50c90ba	initial commit for the redbee-dev platform	2010-11-07 13:56:17 +00:00
maralvira	26725e7c19	use sicslowmac_driver instead of contikimac_driver --- since contikimac ... power saving doesn't seem to be working.	2010-11-07 13:46:03 +00:00
enricmcalvo	01f886dad9	Slight modification to clean properly	2010-11-07 08:40:24 +00:00
enricmcalvo	59bdebe842	Added I2C Master drivers and accelerometer drivers	2010-11-07 08:38:51 +00:00
dak664	acd9d516d8	Add RPL neighbors and routes printout to Jackdaw menu	2010-11-05 20:35:15 +00:00
joxe	f08e262055	fixed buggy config of phidget sensors for Z1	2010-11-05 10:31:57 +00:00
dak664	abf4791db4	Add Raven RPL build option	2010-11-03 16:51:55 +00:00
adamdunkels	896f627290	Made uIPv6 packet queueuing configuration configurable	2010-11-02 11:06:01 +00:00
oliverschmidt	0d1db1a78b	Since a few days the cc65 trunk contains a POSIX dirent implementation for the Atari. Until a new cc65 release is available - and Contiki has switched to that release - I'll borrow the implementation from the cc65 trunk.	2010-11-01 19:44:34 +00:00
dak664	9194b3ac69	Fix error when RS232 not enabled	2010-10-28 19:31:28 +00:00
dak664	ad6712736b	Fix Windows XP RNDIS+CDC serial port enumeration	2010-10-28 19:30:14 +00:00
oliverschmidt	0ef1171705	Just always call process_run() and etimer_request_poll() in turn - like the "major" platforms do.	2010-10-27 22:17:39 +00:00
dak664	258e3cc93a	Allow simultaneous use of RS232 and USB serial ports	2010-10-27 14:51:20 +00:00
salvopitru	d8711d32a3	Added configuration in order to run Rime.	2010-10-27 14:05:23 +00:00
oliverschmidt	46122f558f	Skip the CBM volume header.	2010-10-26 18:56:39 +00:00
joxe	dfff488a3d	configured tmote sky to use 5 retransmissions	2010-10-26 13:26:16 +00:00
salvopitru	ec5e3ce0d7	New Contiki port to STM32W108.	2010-10-25 09:03:38 +00:00
adamdunkels	726bd0e58e	Made collect neighbors, queuebuf number, uip-ds6 configuration settable through project-conf.h	2010-10-24 21:12:31 +00:00
dak664	123e3cae41	Fix compiler warnings	2010-10-23 15:26:46 +00:00
oliverschmidt	5e10cf2eed	Implemented cfs_opendir() and friends for CBMs based on cc65's cbm_opendir() and friends.	2010-10-23 13:48:06 +00:00
oliverschmidt	9e9eb4b55c	There's no point in pulling in cfs-posix-dir.c if the POSIX functions it depends on are dummies anyway.	2010-10-23 08:17:45 +00:00
joxe	a1e7d9c256	fixed some config params to avoid re-defining if already defined	2010-10-21 18:25:39 +00:00
adamdunkels	37a4200f40	Made a lot of things configurable via the (optional) project-conf.h	2010-10-20 22:21:16 +00:00
oliverschmidt	da7c9700cb	Added support for the FTP standalone client to the c128 target.	2010-10-19 22:41:24 +00:00
oliverschmidt	bcc2120570	Added support for the FTP standalone client to the c64 target.	2010-10-19 22:31:59 +00:00
oliverschmidt	842c6a018a	The recent global change regarding htons allowed to remove this hack :-)	2010-10-19 20:30:47 +00:00
adamdunkels	5585d72c86	A simple but substantial change: uIP used the htons()/HTONS() macro ... functions for converting between host and network byte order. These names are the de facto standard names for this functionality because of the original BSD TCP/IP implementation. But they cause problems for uIP/Contiki: some platforms define these names themselves (Mac OS, most notably), causing compilation problems for Contiki on those platforms. This commit changes all htons to uip_htons instead. Same goes for htonl, ntohs, and ntohl. All-caps versions as well.	2010-10-19 18:29:03 +00:00
kasunch	5a46c629de	Added missing slip.c file to CONTIKI_TARGET_SOURCEFILES	2010-10-19 17:05:45 +00:00
oliverschmidt	f4e2c41c76	Added support for the FTP standalone client to the atari target.	2010-10-16 11:42:40 +00:00
oliverschmidt	abe360e9fb	Added support for the FTP standalone client to the apple2enh target.	2010-10-16 10:41:46 +00:00
oliverschmidt	b943e73b9b	Made default IP config identical to minimal-net and log the IP config similar to minimal-net.	2010-10-15 21:14:18 +00:00
nifi	9a4d17fe7c	Bug fix: put device in standby mode at startup in case it has previously been put in deep power-down mode; patch by Martin Bor	2010-10-12 22:55:11 +00:00
oliverschmidt	a5df3e8d00	Removed unnecessary include.	2010-10-12 19:57:44 +00:00
oliverschmidt	284f7166b7	Allow standalone win32 programs to exit the Contiki process by calling LOAD_UNLOAD().	2010-10-12 11:03:53 +00:00
adamdunkels	93f6fda353	Updated configuration options to reflect recent changes. Increased number of queuebufs. Corrected the name of the collection neighbors option.	2010-10-03 20:40:42 +00:00
oliverschmidt	3c733a0c4e	Added section on 'dir2atr' now that there's an "official" download.	2010-10-03 11:01:32 +00:00
oliverschmidt	828378ab47	Replaced "retro" color scheme with ergonomic color scheme.	2010-10-03 10:30:53 +00:00
oliverschmidt	23aea9df35	On the Atari it seems reasonable to start on a clear b&w screen even for non-CTK apps.	2010-10-02 22:07:24 +00:00
oliverschmidt	5d54b6aba8	Now that I understand that the Atari is in fact monochrome using black & white seems the logical consequence.	2010-10-01 20:27:06 +00:00
oliverschmidt	f3b4024375	Give the use a chance to read an error message before returning to the DOS menu (like on the Apple II).	2010-09-29 21:11:21 +00:00
oliverschmidt	c839eacbdf	Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/.	2010-09-29 19:44:01 +00:00
oliverschmidt	f70d4c600d	Minor wording change.	2010-09-29 12:07:02 +00:00
oliverschmidt	cd24e920b6	Made cfs-based webserver example compatible with 8.3 file systems.	2010-09-28 20:40:52 +00:00
oliverschmidt	8eeeef17d1	Made cfs-based webserver example compatible with 8.3 file systems.	2010-09-28 19:36:16 +00:00
oliverschmidt	b2fe3db298	Just name the binary always 'contiki'.	2010-09-28 19:23:30 +00:00
fros4943	93b953f815	moved contiki-specific initialization to separate function	2010-09-24 12:59:06 +00:00
kasunch	75e4e80df2	Adding machine dependent SLIP routines source file to the sources list	2010-09-20 18:34:14 +00:00
kasunch	ce8bb8df9c	Adding machine dependent SLIP routines for UART0.	2010-09-20 18:30:25 +00:00
kasunch	6104922c40	Added new network initialization source file to the sources list.	2010-09-20 18:22:28 +00:00
kasunch	4ebc114e90	Now, all network related initialization code segments are in one file	2010-09-20 18:15:27 +00:00
kasunch	3f1bea1ed3	1. Initialized SLIP when uIPv4 or uIPv6 is used. ... 2. Random number generator is initialized using both node id and unique hardware id 3. Printing MAC address is moved to network initialization section.	2010-09-20 18:07:25 +00:00
kasunch	cdc68b13e0	1. Added uIPv6 configuration options. ... 2. Fine tuned some configuration options to save RAM.	2010-09-20 17:56:14 +00:00
dak664	110bc0242e	Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum	2010-09-17 21:59:09 +00:00
dak664	dc9f16131c	Make fake routines conditional on CONTIKI_NO_NET	2010-09-14 19:16:53 +00:00
dak664	6d3c276e7e	Add rpl configuration and webserver options.	2010-09-14 19:13:05 +00:00
dak664	b9b4f07ad9	Add internal webserver option	2010-09-14 17:03:29 +00:00
dak664	0858f71e6a	Add rpl webserver option	2010-09-14 16:59:44 +00:00
oliverschmidt	6e5e560e33	Up to now *all* Contiki apps for the Apple2 were built for maximal RAM - which means that they can't return to OS level but must reboot on exit. However many apps can get along well with 1kB less memory - which allows them to exit to the OS. ... Therefore now the default is 1kB less memory - and apps actually needing maximal RAM can get it by adding WITH_REBOOT to their DEFINES.	2010-09-08 22:50:56 +00:00
joxe	f02cdc7c8f	minor polish to the phidget sensor driver	2010-08-27 12:58:57 +00:00
joxe	53840aca67	added basic phidget support for the Z1	2010-08-27 12:17:40 +00:00
nifi	91be7cebc4	Node ID is stored in external flash and restored on bootup	2010-08-26 22:08:11 +00:00
dak664	3bee71ad81	Add simple webserver for RPL status	2010-08-26 18:55:43 +00:00
joxe	a461eceff8	fixed configuration of button sensor	2010-08-26 16:01:20 +00:00
joxe	2c5f5cd849	added init of xmem for z1 platform	2010-08-26 09:16:39 +00:00
nifi	7d34fd1deb	Added Sentilla USB platform. This platform is similar to the Sky platform but without the sensors and with 2 leds.	2010-08-25 19:57:33 +00:00
nifi	14873a923b	Added temperature sensor for the builtin temperature sensor in MSP430	2010-08-25 19:34:06 +00:00
nifi	198db63c3b	Moved the ADC configuration to sky-sensors.c and sensors now only need to specify their sample channel. This helps to avoid conflicts when using multiple sensors.	2010-08-25 19:30:52 +00:00
joxe	d946fdd574	added Z1 xmem + coffee driver	2010-08-25 17:28:15 +00:00
joxe	645c48a332	added Z1 platform	2010-08-24 16:26:38 +00:00
joxe	b04ebb2b29	minor fix for making the msp430 makefile work for msp430X arch	2010-08-24 16:24:11 +00:00
oliverschmidt	164d55e39d	Reduced MTU size in order to allow for a reasonable (and full screen width) URL length.	2010-08-14 08:32:00 +00:00
dak664	885fee3561	Add RPL border router process	2010-08-06 17:39:31 +00:00
dak664	75de6f9fb0	Rerevert to misspelled HARWARE_REVISION	2010-08-03 21:42:05 +00:00
dak664	ea9e5bef1c	Revert mistaken hardware name change!	2010-08-03 20:18:54 +00:00
dak664	f2f7c169ea	Reduce RIME max time to fit in 16 bit timer	2010-08-03 20:01:21 +00:00
dak664	52feb47d5e	Change RIME max time to fit in 16 bit timer	2010-08-03 19:58:35 +00:00
dak664	3a8085b159	Change RF channel to 26 for econotag compatibility	2010-08-03 19:56:27 +00:00
dak664	b706c48efd	Add experimental RPL code ... Change RF channel to 26 for econotag compatibility	2010-08-03 19:55:42 +00:00
maralvira	1cfa126568	enable sicslowpan fragmentation	2010-07-28 18:51:27 +00:00
maralvira	fe16506d1d	increase UIP buffer size to 1300 to allow full size ipv6 packets	2010-07-28 18:51:00 +00:00
maralvira	8dce85c308	don't need BLOCKING_TX anymore with the recent bugfixes	2010-07-28 18:50:07 +00:00
oliverschmidt	e53c34770a	Integrated latest enhancements contributed by Kajtar Zsolt: ... - Use cc65 C library _filetype for writing instead of fixed 'p'. - Support for fake O_TRUNC through SCRATCH.	2010-07-22 10:16:58 +00:00
oliverschmidt	8a6f7a1dcf	The cc65 C64 memory layout offers enough memory for larger URLs so have a nice scrolling URL text entry field.	2010-07-20 22:47:42 +00:00
oliverschmidt	cb929a3e5c	Adjusted assembler to reference uip_aligned_buf instead of uip_buf.	2010-07-20 20:42:25 +00:00
joxe	857883558b	adapted to the new spi and cc2420 naming - and split config file	2010-06-23 10:25:54 +00:00
joxe	80942abaf7	split hw config into platform-conf and adapted to new SPI and CC2420 naming	2010-06-23 10:18:05 +00:00
dak664	08897e1c1f	Add explicit queuebuf and packetbuf to build	2010-06-22 17:10:24 +00:00
joxe	365db27f92	moved CC2420 configuration into the conf file	2010-06-22 06:48:43 +00:00
joxe	47053c2cdb	added LOOP count configuration for cc2420dbk	2010-06-22 06:39:44 +00:00
joxe	f758f6569e	moved cc2420 config to platform config	2010-06-21 19:57:18 +00:00
joxe	80ec597f75	moved config from cc2420 to micaz	2010-06-21 19:53:58 +00:00
nifi	2ca32f9c76	Enabled 32-bit clock ticks to allow longer timeouts.	2010-06-21 15:15:10 +00:00
dak664	e51f03eeb1	Turn off radio DEBUGFLOW printing	2010-06-18 15:45:55 +00:00
dak664	ac6f837e4a	Use RF230BB for compilation - untested!	2010-06-18 15:33:15 +00:00
adamdunkels	3fa8ffda1a	Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific	2010-06-14 19:19:16 +00:00
adamdunkels	951fd78f6c	ctimer moved from net/rime to sys/	2010-06-14 18:58:45 +00:00
maralvira	994067aecd	bring econotag conf in-sync with sky. ... Increase the size of the route and neighbor tables; remove the uIP packet buffer queue for every neighbor to save RAM	2010-06-14 15:56:09 +00:00
adamdunkels	f81ca85157	Increase the size of the route and neighbor tables; remove the uIP packet buffer queue for every neighbor to save RAM	2010-06-14 07:04:20 +00:00
fros4943	8f1988e7fc	using OBJECTDIR instead of "obj_cooja" + bugfix: allow for externally defined CC	2010-06-11 15:17:26 +00:00
maralvira	c01421fbb5	update process initialization and call ctimer_init	2010-06-09 18:05:38 +00:00
maralvira	7aa44f14d9	initial redbee-econotag commit ... based on commit aac3a355451d899f02737f2907af8c874ee4feba of git://git.devl.org/git/malvira/contiki-mc1322x.git	2010-06-09 14:46:30 +00:00
joxe	c4278dedc2	replaced uip_buf with the new uip_aligned_buf	2010-06-03 11:37:50 +00:00
nifi	eb63cb21e0	Added make variable with command name to show in warning	2010-05-27 12:42:48 +00:00
joxe	97fc9d2ee8	no aaaa address if configured for RPL	2010-05-25 21:32:41 +00:00
joxe	50cca91d93	made use of the new link-local address api in ds6	2010-05-09 17:53:31 +00:00
dak664	6909f291af	Use siimple ethernet address translation for RF230BB by default. ... That gets pings and webserver working again for Vista and W7. Hopefully it won't break something that already works...	2010-05-08 17:17:17 +00:00
oliverschmidt	bf3ec8c452	Reverting to the "old" plain uip_buf allows the Apple2 to revert to the previous memory layout.	2010-05-08 07:26:20 +00:00
oliverschmidt	62ca797fad	The recent change turning uip_buf from an array to a pointer increases the code generated by cc65 significantly :-( ... This change modifies the set of modules placed in the Apple2 Language Card to again make maximum use of that memory without overflow.	2010-05-07 21:02:35 +00:00
nifi	4aba60ad25	acc-sensor and ext-sensor moved to the jcreate platform	2010-05-06 13:55:21 +00:00
dak664	e78984aa25	Bugfixes and additional testing contributed by Mauro Greco. Still a probabe bug when coffee page size is a multiple of physical page size and FLASH_COMPLEMENT_DATA=0	2010-05-04 14:08:01 +00:00
nifi	ed472717f2	Added Sentilla Jcreate platform. This platform is similar to the Sky platform but with other sensors and 8 leds.	2010-05-03 21:57:35 +00:00
nifi	7cebc4ed99	added missing include	2010-05-03 13:55:26 +00:00
nifi	bf198ec695	Moved sensors setup to contiki-sky-platform.c and common make rules to Makefile.common for easier reuse in similar platforms	2010-05-03 13:51:11 +00:00
fros4943	79aa299531	fixed random seed for cooja motes	2010-05-02 09:42:15 +00:00
joxe	aa980e3f67	removed initialization of RPL from platform main	2010-05-01 13:07:31 +00:00
joxe	3c9256c39f	removed RPL routing state struct from platform config file	2010-05-01 12:04:13 +00:00
nvt-se	d529132002	Added missing parts of the RPL configuration	2010-04-30 15:06:00 +00:00
joxe	b0640af3a2	added rpl support for tmote sky - enabled by default	2010-04-30 13:52:14 +00:00
oliverschmidt	5dd5b5ac43	Adjusted typdefs to Cygwin 1.7 (now not compatible anymore with Cygwin 1.5).	2010-04-21 20:35:22 +00:00
oliverschmidt	5640f89259	In contrast to Cygwin 1.5 Cygwin 1.7 doesn't allow to get __argc out of thin air anymore. Instead of finding a workaround I opted to remove the whole command line checking here which was added so revisions ago. The reasoning: ... The WinPcap driver presumes to be obligatory for the application. Therefore it quits the whole application if it can't initialize successfully. In former times the WinPcap driver required a cmdline parameter to initialize properly. The netsim target presumably doesn't consider the WinPcap driver obligatory for its applications so it checks the cmdline and starts the WinPcap driver only if it finds the WinPcap cmdline parameter present. Thus it prevents the WinPcap driver from failing to initialize which brings down the whole application. However recently the WinPcap driver was changed to just use some default value if its cmdline parameter isn't found. So there's no more need to keep WinPcap from starting just to make sure it doesn't bring down the whole application. The presumption behind all this reasoning is that a WinPcap driver running with some (potentially wrong) default isn't worse than a WinPcap driver not running at all.	2010-04-21 20:27:28 +00:00
oliverschmidt	8b6d34dbfc	Configure maximum number of C128 web server connections indirectly via maximum number of TCP connections.	2010-04-11 21:34:18 +00:00
oliverschmidt	67e775ecee	The maximum number of C64 web server connections is now equal to the (new) default as the CBM PFS allows for 10 open files.	2010-04-11 21:30:14 +00:00
oliverschmidt	8108585795	Configure maximum number of Apple2 web server connections indirectly via maximum number of TCP connections.	2010-04-11 21:23:45 +00:00
oliverschmidt	ce412471e4	Integrated latest fix contributed by Kajtar Zsolt.	2010-04-06 09:46:58 +00:00
oliverschmidt	f38a3ff06c	Added Platform-specific File System (PFS) for the C128 contributed by Kajtar Zsolt.	2010-04-05 15:25:49 +00:00
oliverschmidt	7089ce05e2	Added Platform-specific File System (PFS) for the C64 supporting IDE64 fast R/W contributed by Kajtar Zsolt.	2010-04-05 14:11:01 +00:00
fros4943	170e4d6a99	sky simulation bug workaround: explicit write to compare register wakes up timer scheduling again	2010-03-31 13:15:32 +00:00
fros4943	c21ff48788	ip forwarding only for ipv4	2010-03-31 10:22:33 +00:00
fros4943	c2354a5797	changed cooja platform default uip4 configuration to use uip_over_mesh with a slip gateway	2010-03-31 09:39:46 +00:00
oliverschmidt	8dd2b75383	Explicitly set CBM filetypes (PRG, USR).	2010-03-31 06:05:37 +00:00
fros4943	e640c61b78	commented unused functions	2010-03-29 12:57:57 +00:00
fros4943	e3e69afd15	changed to ds6 module, instead of obsolete netif module	2010-03-29 11:52:08 +00:00
fros4943	9dfce4bea1	removed bad uip-netif.h include	2010-03-29 10:43:03 +00:00
fros4943	540f30d855	improved support for checkpointing operations via serial, several minor fixes	2010-03-29 09:48:06 +00:00
oliverschmidt	54e19782ae	Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations.	2010-03-27 15:16:57 +00:00
oliverschmidt	6769e6a99f	- Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations. ... - Completed declarations.	2010-03-27 14:46:08 +00:00
fros4943	a5092220b4	fixed next timer variable types	2010-03-25 09:12:03 +00:00
adamdunkels	2a3d0dc042	Bugfix: data that has been prepared with the prepare() method must be possible to send multiple times	2010-03-23 15:19:55 +00:00
adamdunkels	432a3fd12e	Bugfix: the return values from the cca method were switched	2010-03-23 15:10:27 +00:00
fros4943	1322195921	defining rtimer_clock_t to the same as clock_time_t	2010-03-23 13:34:00 +00:00
fros4943	c66dd0b1bf	implemented rtimer library for simulated contiki motes	2010-03-23 13:13:17 +00:00
fros4943	49526e100f	added simulated interrupt thread, currently only used to implement rtimer functionality	2010-03-23 13:12:41 +00:00
fros4943	bee0ea4834	temporarily turning on radio for sending a packet	2010-03-23 12:13:43 +00:00
adamdunkels	03d1388c0d	Print out MAC and RDC when booting cooja nodes	2010-03-23 12:08:05 +00:00
adamdunkels	cd3a7c7a73	Dummy watchdog implementation for cooja nodes	2010-03-23 12:07:03 +00:00
nifi	58e47d1d97	activated workaround for memcpy/memset bug in mspgcc	2010-03-21 10:44:58 +00:00
joxe	29335f2f7d	added possibility to hard-code 7 bytes of the MAC address - last byte picked from nodeid	2010-03-19 14:08:15 +00:00
adamdunkels	fc61ee5dbb	Bugfix: turn on watchdog before starting processes to avoid a process hanging in its startup phase	2010-03-19 13:28:27 +00:00
adamdunkels	91afe5b0f4	Turned on broadcast announcements by default, turn on announcements for collect	2010-03-19 13:27:46 +00:00
dak664	9bcf982d87	Update minimal net to new ds6 interface	2010-03-18 20:11:54 +00:00
dak664	d1f1fae689	update to ds6 calls	2010-03-18 14:52:50 +00:00
dak664	f03600d4e3	update to uip-ds6.c	2010-03-18 14:36:00 +00:00
dak664	de2f5aaddc	change for ds6 calls	2010-03-17 20:19:33 +00:00
joxe	7d220c910a	removed uip_router	2010-03-16 15:45:20 +00:00
nifi	0299aab5e4	Fixed to use sky-sensors to setup ADC12	2010-03-15 23:37:01 +00:00
dak664	cae40439d7	Add optional RS232 debugging	2010-03-15 18:56:13 +00:00
joxe	fd3d6c44d0	integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling	2010-03-15 16:41:24 +00:00
fros4943	645d505f46	contiki-cooja-main.c requires CLASSNAME	2010-03-15 11:03:17 +00:00
fros4943	5b2caf2050	removed the use of a template source file when compiling for the cooja platform, instead compiling against contiki-cooja-main.c. ... this change simplifies access to the contiki main source, and makes the cooja platform more similar to other contiki targets	2010-03-15 11:02:57 +00:00
fros4943	89d7d926c4	added ipv4 and ipv6 default configuration	2010-03-10 12:18:29 +00:00
fros4943	7465fb812a	removed explicit init-net*.c for cooja platform, instead performed in main file (contiki-template.c)	2010-03-10 12:18:07 +00:00
fros4943	f8488925eb	added uip-driver (for both ivp4 and ipv6), setting WITH_UIP* compiler flags in Makefile	2010-03-10 12:15:52 +00:00
fros4943	f36cfffc99	Makefile target for uploading precompiled firmware, example: ... make upload-ihex FILE=myfile.ihex	2010-03-10 11:46:57 +00:00
fros4943	98929bd2f5	cooja-platform netstack conf example	2010-03-10 07:35:49 +00:00
fros4943	45a6740782	radio sensor was removed	2010-03-10 07:35:09 +00:00
fros4943	48d6d1fd6d	removed no longer used cooja/contiki synchronization variables	2010-03-09 08:14:31 +00:00
fros4943	0cc96ae481	net stack update: currently fixed to null* and rime.	2010-03-09 08:14:06 +00:00
fros4943	f87458c558	removed radio "sensor" (only used for signal strengths, also available in radio driver)	2010-03-09 08:12:15 +00:00
fros4943	07753fb01f	updated radio driver, simplified code	2010-03-09 08:11:05 +00:00
oliverschmidt	8ca206aa6b	Changed ETH64 base address from $DE10 to $DE00 as this is the default base address according to the manufacturer.	2010-03-06 13:05:16 +00:00
nvt-se	0fc1c00f09	Use LPP for radio duty cycling. 1 Hz channel check rate	2010-03-04 15:04:28 +00:00
nvt-se	20cae40694	use CSMA	2010-03-04 14:36:48 +00:00
nvt-se	2aa9d22f34	Switched to the NETSTACK API.	2010-03-04 14:16:30 +00:00
nifi	efe8f200af	Updated to match the new netstack api	2010-03-02 22:40:39 +00:00
dak664	d3697344ec	Update for NETSTACK_CONF_FRAMER	2010-03-02 16:25:47 +00:00
dak664	7c020468b5	Remove frame.h include, expose raven_ping6 for external calls	2010-03-02 15:15:03 +00:00
nifi	1025e7337c	Added configurable router module	2010-03-01 14:46:57 +00:00
nifi	5e43a6998b	Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.	2010-03-01 13:30:21 +00:00
dak664	feb6aa0ed2	Change back to SICSLOWPAN_COMPRESSION_HC06 from SICSLOWPAN_COMPRESSION_HC01	2010-02-28 21:39:40 +00:00
dak664	39e6f6a830	Clean up, functional webserver for further testing of low power protocols	2010-02-28 21:29:19 +00:00
dak664	5debc183a9	Enable radio stats in sensor cgi as default	2010-02-26 21:38:57 +00:00
dak664	844b3a34f7	Platform 0 was matching by default	2010-02-26 21:15:28 +00:00
c_oflynn	b5b77ac47a	Use new HC06	2010-02-26 10:55:00 +00:00
joxe	80b289f7c1	updated sky platform for new sicslowpan	2010-02-25 15:51:37 +00:00
kasunch	350fb21ff7	Adding a Makfile for example applications.	2010-02-24 09:14:46 +00:00
kasunch	80a408526f	Adding an example application for battery sensor	2010-02-24 09:13:56 +00:00
kasunch	c90b76427a	Adding ADC sources and battery sensor source to CONTIKI_TARGET_SOURCEFILES.	2010-02-24 09:09:35 +00:00
kasunch	0c9612b7b9	Adding battery sensor	2010-02-24 09:05:40 +00:00
kasunch	ea53e5b845	Adding ADC functions	2010-02-24 09:04:58 +00:00
nifi	07ee8458e7	Fixed bootup printf() with 32-bit timer values	2010-02-23 21:02:30 +00:00
nifi	bb9d430138	added bootup print of NETSTACK_RDC name	2010-02-23 20:54:09 +00:00
adamdunkels	85a9f7db42	Fix bootup printf() with 32-bit timer values	2010-02-23 18:45:16 +00:00
adamdunkels	eadfe5f3d6	Enabled 32-bit clock ticks to allow longer timeouts; experimentally disabled polite announcements in favour of a non-announcement based collect protocol	2010-02-23 18:44:52 +00:00
adamdunkels	69a5b67523	Updated netsim to new netstack API	2010-02-23 18:44:08 +00:00
adamdunkels	08f06d8039	Updated to new sensors API	2010-02-23 18:43:43 +00:00
adamdunkels	757ca59511	Added netstack init to native platform	2010-02-23 18:43:21 +00:00
adamdunkels	ebea184116	Added netstack config for CC2420 radio driver, and also for cxmac RDC layer (which is not confirmed if it runs on real hardware, only tested in simulation)	2010-02-23 18:42:41 +00:00
dak664	e695e4860d	Allow build with original radio driver using $make RF230BB=0	2010-02-23 17:43:20 +00:00
dak664	64d57a3dd8	Update jackdaw to new radio driver interface	2010-02-23 17:35:49 +00:00
dak664	a64a8674bc	Remove debug print	2010-02-23 02:22:25 +00:00
dak664	cbb8621e30	update to new driver format	2010-02-22 22:23:18 +00:00
adamdunkels	60425aa355	ESB uses tr1001 radio	2010-02-18 23:53:21 +00:00
adamdunkels	fa4d4db329	Use the common netstack_init	2010-02-18 23:19:03 +00:00
adamdunkels	927aa821c3	Updated to new MAC api	2010-02-18 23:10:06 +00:00
adamdunkels	459c550cbd	Updated to match the new netstack api	2010-02-18 23:04:54 +00:00
adamdunkels	e34eb54960	A work-in-progress rework of the Contiki MAC and radio layers. The ... main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.	2010-02-18 21:48:39 +00:00
dak664	6df1e0ca58	add experimental cxmac code	2010-02-18 17:24:12 +00:00
dak664	38c5922294	experimental cxmac code	2010-02-18 17:23:19 +00:00
dak664	72e1528ea7	Make sicslowmac the default!	2010-02-16 23:42:06 +00:00
dak664	1da06eff83	Specify mac driver in contiki-conf.h	2010-02-16 22:22:13 +00:00
dak664	53801ffbb1	Add optional RF230BB radio driver	2010-02-16 22:17:51 +00:00
dak664	1bdff78e6e	Remove compiler warnings	2010-02-15 20:54:37 +00:00
joxe	3a2eec2b1a	fixed ext-sensor for jcreate	2010-02-13 11:20:48 +00:00
oliverschmidt	a66821f1d1	Explicitly turn on forms and centering for consistency reasons.	2010-02-13 10:46:36 +00:00
oliverschmidt	7ef7efecd8	Without forms, centering and history we can just squeeze in DNS.	2010-02-13 10:44:23 +00:00
dak664	dd4bf06430	Add serial command to send voltage measurement to webserver	2010-02-12 16:46:39 +00:00
dak664	ed76239525	Add RADIOSTATS to sensors cgi	2010-02-12 16:42:59 +00:00
dak664	c0e12ffa54	Enable ADC2 for optional external supply voltage measurement	2010-02-11 21:58:51 +00:00
dak664	cc47c556e7	Optionally measure ADC2 along with temperature	2010-02-11 20:49:31 +00:00
dak664	e9d760bf9e	Convert <CR><CR><LF> line endings to <LF>	2010-02-11 20:42:36 +00:00
dak664	e4ec444611	Send optional ADC2 measurement to 1284p	2010-02-11 20:35:22 +00:00
dak664	4576b7b671	Add option to measure external supply voltage on ADC2	2010-02-11 20:22:11 +00:00
dak664	e7d2b64894	Convert <CR><CR><LF> line endings to <LF>	2010-02-11 20:19:51 +00:00
dak664	97ea7b0376	Add SEND_ADC2 command definition	2010-02-11 18:37:21 +00:00
dak664	6a2d1c057a	Allow cygwin remakes and cleans	2010-02-11 18:34:39 +00:00
dak664	c321531021	Document temperature and voltage measurement features and/or bugs	2010-02-11 18:31:27 +00:00
dak664	5eacbeedba	*** empty log message ***	2010-02-10 22:53:55 +00:00
oliverschmidt	50be40768b	Removed closing of stdin, stdout (and stderr on the Apple2). It was introduced in order to maximize the number of available file handles for the webserver. However none of the target machine DOSes allows to open a single file several times diminishing the intended effect very much. One the other hand not being able to "just printf() something" causes trouble over and again - i.e. hello-world seemingly not working...after all a typical case of german over-enigneering ;-)	2010-02-10 07:43:25 +00:00
dak664	fe8417bd8a	Clarify defines for RF230 and effect on program size	2010-02-09 17:03:55 +00:00
dak664	282ffaf343	Add conditional boot messages and file logging	2010-02-09 14:43:16 +00:00
dak664	03c0245465	Expose httpd-cgi ipv6 address print to other modules	2010-02-09 14:41:18 +00:00
nifi	a6c6522548	Updated documentation for new APIs.	2010-02-09 08:29:58 +00:00
nifi	27d5e2338a	Added convenient flag to include codeprop	2010-02-09 07:34:37 +00:00
nifi	dbacc71c7d	Added missing uip-ipchksum when using IP	2010-02-09 07:04:11 +00:00
nifi	665c38e7f4	Set elfloader to use flash instead of ram for storage as default.	2010-02-09 06:52:26 +00:00
dak664	e12e794a74	QUEUEBUF fragmentation defines	2010-02-08 22:22:27 +00:00
adamdunkels	6414bf3a55	Enabled sicslowpan fragmentation and reassembly by default on the sky platform	2010-02-08 22:12:29 +00:00