adapted to the new spi and cc2420 naming - and split config file
This commit is contained in:
joxe
parent
705f8cc451
commit
857883558b
|
|
@ -6,7 +6,7 @@ SENSOR_BOARD_SOURCEFILES = mts300.c
|
|||
|
||||
CONTIKI_TARGET_SOURCEFILES += adc.c rs232.c cfs-eeprom.c contiki-micaz-main.c \
|
||||
leds-arch.c cc2420.c init-net-rime.c node-id.c \
|
||||
clock.c spi.c cc2420-arch.c rtimer-arch.c ds2401.c \
|
||||
clock.c spi.c cc2420-arch.c rtimer-arch.c ds2401.c \
|
||||
battery-sensor.c
|
||||
|
||||
CONTIKI_TARGET_SOURCEFILES += $(SENSOR_BOARD_SOURCEFILES)
|
||||
|
|
@ -14,6 +14,10 @@ CONTIKI_TARGET_SOURCEFILES += $(SENSOR_BOARD_SOURCEFILES)
|
|||
CONTIKIAVR=$(CONTIKI)/cpu/avr
|
||||
CONTIKIBOARD=.
|
||||
|
||||
ifdef UIP_CONF_IPV6
|
||||
CFLAGS += -DWITH_UIP6=1
|
||||
endif
|
||||
|
||||
# MicaZ runs on Clock rate 7.3728 MHz
|
||||
CONTIKI_PLAT_DEFS = -DF_CPU=7372800UL -DAUTO_CRC_PADDING=2
|
||||
|
||||
|
|
|
|||
|
|
@ -45,37 +45,15 @@
|
|||
#define NETSTACK_CONF_NETWORK rime_driver
|
||||
#define NETSTACK_CONF_MAC csma_driver
|
||||
#define NETSTACK_CONF_RDC cxmac_driver
|
||||
#define NETSTACK_CONF_RADIO cc2420_driver
|
||||
|
||||
#define MAC_CONF_CHANNEL_CHECK_RATE 8
|
||||
|
||||
#define RF_CHANNEL 26
|
||||
|
||||
#define HAVE_STDINT_H
|
||||
#include "avrdef.h"
|
||||
|
||||
|
||||
/*
|
||||
* MCU and clock rate.
|
||||
* MICAZ runs on 7.3728 MHz clock.
|
||||
*/
|
||||
#define MCU_MHZ 7
|
||||
|
||||
#define PLATFORM PLATFORM_AVR
|
||||
|
||||
/* Clock ticks per second */
|
||||
#define CLOCK_CONF_SECOND 128
|
||||
|
||||
/* COM port to be used for SLIP connection */
|
||||
#define SLIP_PORT RS232_PORT_0
|
||||
|
||||
/* Pre-allocated memory for loadable modules heap space (in bytes)*/
|
||||
#define MMEM_CONF_SIZE 256
|
||||
|
||||
/* Use the following address for code received via the codeprop
|
||||
* facility
|
||||
*/
|
||||
#define EEPROMFS_ADDR_CODEPROP 0x8000
|
||||
|
||||
#define EEPROM_NODE_ID_START 0x00
|
||||
#include "platform-conf.h"
|
||||
|
||||
#define TIMESYNCH_CONF_ENABLED 1
|
||||
#define CC2420_CONF_TIMESTAMPS 1
|
||||
|
|
@ -133,90 +111,6 @@
|
|||
#define UIP_CONF_TCP_SPLIT 0
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/* LEDs ports. */
|
||||
#define LEDS_PxDIR DDRA // port direction register
|
||||
#define LEDS_PxOUT PORTA // port register
|
||||
#define LEDS_CONF_RED 0x04 //red led
|
||||
#define LEDS_CONF_GREEN 0x02 // green led
|
||||
#define LEDS_CONF_YELLOW 0x01 // yellow led
|
||||
|
||||
|
||||
/*
|
||||
* SPI bus configuration for the MicaZ.
|
||||
*/
|
||||
|
||||
/* SPI input/output registers. */
|
||||
#define SPI_TXBUF SPDR
|
||||
#define SPI_RXBUF SPDR
|
||||
|
||||
#define BV(bitno) _BV(bitno)
|
||||
|
||||
#define SPI_WAITFOREOTx() do { while (!(SPSR & BV(SPIF))); } while (0)
|
||||
#define SPI_WAITFOREORx() do { while (!(SPSR & BV(SPIF))); } while (0)
|
||||
|
||||
#define SCK 1 /* - Output: SPI Serial Clock (SCLK) - ATMEGA128 PORTB, PIN1 */
|
||||
#define MOSI 2 /* - Output: SPI Master out - slave in (MOSI) - ATMEGA128 PORTB, PIN2 */
|
||||
#define MISO 3 /* - Input: SPI Master in - slave out (MISO) - ATMEGA128 PORTB, PIN3 */
|
||||
|
||||
/*
|
||||
* SPI bus - CC2420 pin configuration.
|
||||
*/
|
||||
|
||||
#define FIFO_P 6 /* - Input: FIFOP from CC2420 - ATMEGA128 PORTE, PIN6 */
|
||||
#define FIFO 7 /* - Input: FIFO from CC2420 - ATMEGA128 PORTB, PIN7 */
|
||||
#define CCA 6 /* - Input: CCA from CC2420 - ATMEGA128 PORTD, PIN6 */
|
||||
|
||||
#define SFD 4 /* - Input: SFD from CC2420 - ATMEGA128 PORTD, PIN4 */
|
||||
#define CSN 0 /* - Output: SPI Chip Select (CS_N) - ATMEGA128 PORTB, PIN0 */
|
||||
#define VREG_EN 5 /* - Output: VREG_EN to CC2420 - ATMEGA128 PORTA, PIN5 */
|
||||
#define RESET_N 6 /* - Output: RESET_N to CC2420 - ATMEGA128 PORTA, PIN6 */
|
||||
|
||||
/* Pin status. */
|
||||
|
||||
#define FIFO_IS_1 (!!(PINB & BV(FIFO)))
|
||||
#define CCA_IS_1 (!!(PIND & BV(CCA) ))
|
||||
#define RESET_IS_1 (!!(PINA & BV(RESET_N)))
|
||||
#define VREG_IS_1 (!!(PINA & BV(VREG_EN)))
|
||||
#define FIFOP_IS_1 (!!(PINE & BV(FIFO_P)))
|
||||
#define SFD_IS_1 (!!(PIND & BV(SFD)))
|
||||
|
||||
/* The CC2420 reset pin. */
|
||||
#define SET_RESET_INACTIVE() ( PORTA |= BV(RESET_N) )
|
||||
#define SET_RESET_ACTIVE() ( PORTA &= ~BV(RESET_N) )
|
||||
|
||||
/* CC2420 voltage regulator enable pin. */
|
||||
#define SET_VREG_ACTIVE() ( PORTA |= BV(VREG_EN) )
|
||||
#define SET_VREG_INACTIVE() ( PORTA &= ~BV(VREG_EN) )
|
||||
|
||||
/* CC2420 rising edge trigger for external interrupt 6 (FIFOP).
|
||||
* Enable the external interrupt request for INT6.
|
||||
* See Atmega128 datasheet about EICRB Register
|
||||
*/
|
||||
#define FIFOP_INT_INIT() do {\
|
||||
EICRB |= 0x30; \
|
||||
CLEAR_FIFOP_INT(); \
|
||||
} while (0)
|
||||
|
||||
/* FIFOP on external interrupt 6. */
|
||||
#define ENABLE_FIFOP_INT() do { EIMSK |= 0x40; } while (0)
|
||||
#define DISABLE_FIFOP_INT() do { EIMSK &= ~0x40; } while (0)
|
||||
#define CLEAR_FIFOP_INT() do { EIFR = 0x40; } while (0)
|
||||
|
||||
/* Enables/disables CC2420 access to the SPI bus (not the bus).
|
||||
*
|
||||
* These guys should really be renamed but are compatible with the
|
||||
* original Chipcon naming.
|
||||
*
|
||||
* SPI_CC2420_ENABLE/SPI_CC2420_DISABLE???
|
||||
* CC2420_ENABLE_SPI/CC2420_DISABLE_SPI???
|
||||
*/
|
||||
|
||||
#define SPI_ENABLE() ( PORTB &= ~BV(CSN) ) /* ENABLE CSn (active low) */
|
||||
#define SPI_DISABLE() ( PORTB |= BV(CSN) ) /* DISABLE CSn (active low) */
|
||||
|
||||
typedef unsigned short clock_time_t;
|
||||
typedef unsigned short uip_stats_t;
|
||||
typedef unsigned long off_t;
|
||||
|
|
|
|||
|
|
@ -44,24 +44,24 @@
|
|||
void
|
||||
cc2420_arch_init(void)
|
||||
{
|
||||
SFIOR |= BV(PUD); /* Beware, disable all pull-ups. */
|
||||
SFIOR |= BV(PUD); /* Beware, disable all pull-ups. */
|
||||
|
||||
spi_init();
|
||||
|
||||
DDRA |= BV(RESET_N);
|
||||
DDRA |= BV(VREG_EN);
|
||||
DDRB &= ~BV(FIFO);
|
||||
DDRD &= ~BV(CCA);
|
||||
DDRD &= ~BV(SFD);
|
||||
DDRE &= ~BV(FIFO_P);
|
||||
DDRA |= BV(CC2420_RESET_PIN);
|
||||
DDRA |= BV(CC2420_VREG_PIN);
|
||||
DDRB &= ~BV(CC2420_FIFO_PIN);
|
||||
DDRD &= ~BV(CC2420_CCA_PIN);
|
||||
DDRD &= ~BV(CC2420_SFD_PIN);
|
||||
DDRE &= ~BV(CC2420_FIFOP_PIN);
|
||||
|
||||
PORTA |= BV(RESET_N);
|
||||
PORTB |= BV(CSN);
|
||||
|
||||
SPI_DISABLE(); /* Unselect radio. */
|
||||
PORTA |= BV(CC2420_RESET_PIN);
|
||||
PORTB |= BV(CC2420_CSN_PIN);
|
||||
|
||||
CC2420_SPI_DISABLE(); /* Unselect radio. */
|
||||
}
|
||||
|
||||
ISR(INT6_vect)
|
||||
ISR(CC2420_IRQ_VECTOR)
|
||||
{
|
||||
/* TODO : wakeup from sleep mode */
|
||||
cc2420_interrupt();
|
||||
|
|
|
|||
|
|
@ -48,10 +48,6 @@
|
|||
#include "net/rime.h"
|
||||
#include "net/netstack.h"
|
||||
|
||||
#ifndef RF_CHANNEL
|
||||
#define RF_CHANNEL 26
|
||||
#endif
|
||||
|
||||
void
|
||||
init_net(void)
|
||||
{
|
||||
|
|
|
|||
195
platform/micaz/platform-conf.h
Normal file
195
platform/micaz/platform-conf.h
Normal file
|
|
@ -0,0 +1,195 @@
|
|||
/*
|
||||
* Copyright (c) 2010, Swedish Institute of Computer Science.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $Id: platform-conf.h,v 1.1 2010/06/23 10:25:54 joxe Exp $
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
* A brief description of what this file is
|
||||
* \author
|
||||
* Niclas Finne <nfi@sics.se>
|
||||
* Joakim Eriksson <joakime@sics.se>
|
||||
*/
|
||||
|
||||
#ifndef __PLATFORM_CONF_H__
|
||||
#define __PLATFORM_CONF_H__
|
||||
|
||||
/*
|
||||
* Definitions below are dictated by the hardware and not really
|
||||
* changeable!
|
||||
*/
|
||||
#define PLATFORM PLATFORM_AVR
|
||||
|
||||
/*
|
||||
* MCU and clock rate.
|
||||
* MICAZ runs on 7.3728 MHz clock.
|
||||
*/
|
||||
#define MCU_MHZ 7
|
||||
|
||||
/* Clock ticks per second */
|
||||
#define CLOCK_CONF_SECOND 128
|
||||
|
||||
|
||||
/* LED ports */
|
||||
#define LEDS_PxDIR DDRA // port direction register
|
||||
#define LEDS_PxOUT PORTA // port register
|
||||
#define LEDS_CONF_RED 0x04 //red led
|
||||
#define LEDS_CONF_GREEN 0x02 // green led
|
||||
#define LEDS_CONF_YELLOW 0x01 // yellow led
|
||||
|
||||
/* COM port to be used for SLIP connection */
|
||||
#define SLIP_PORT RS232_PORT_0
|
||||
|
||||
/* Pre-allocated memory for loadable modules heap space (in bytes)*/
|
||||
#define MMEM_CONF_SIZE 256
|
||||
|
||||
/* Use the following address for code received via the codeprop
|
||||
* facility
|
||||
*/
|
||||
#define EEPROMFS_ADDR_CODEPROP 0x8000
|
||||
|
||||
#define EEPROM_NODE_ID_START 0x00
|
||||
|
||||
|
||||
#define NETSTACK_CONF_RADIO cc2420_driver
|
||||
|
||||
|
||||
/*
|
||||
* SPI bus configuration for the TMote Sky.
|
||||
*/
|
||||
|
||||
/* SPI input/output registers. */
|
||||
#define SPI_TXBUF SPDR
|
||||
#define SPI_RXBUF SPDR
|
||||
|
||||
#define BV(bitno) _BV(bitno)
|
||||
|
||||
#define SPI_WAITFOREOTx() do { while (!(SPSR & BV(SPIF))); } while (0)
|
||||
#define SPI_WAITFOREORx() do { while (!(SPSR & BV(SPIF))); } while (0)
|
||||
|
||||
#define SCK 1 /* - Output: SPI Serial Clock (SCLK) - ATMEGA128 PORTB, PIN1 */
|
||||
#define MOSI 2 /* - Output: SPI Master out - slave in (MOSI) - ATMEGA128 PORTB, PIN2 */
|
||||
#define MISO 3 /* - Input: SPI Master in - slave out (MISO) - ATMEGA128 PORTB, PIN3 */
|
||||
|
||||
/*
|
||||
* SPI bus - M25P80 external flash configuration.
|
||||
*/
|
||||
|
||||
#define FLASH_PWR 3 /* P4.3 Output */
|
||||
#define FLASH_CS 4 /* P4.4 Output */
|
||||
#define FLASH_HOLD 7 /* P4.7 Output */
|
||||
|
||||
/* Enable/disable flash access to the SPI bus (active low). */
|
||||
|
||||
#define SPI_FLASH_ENABLE() ( P4OUT &= ~BV(FLASH_CS) )
|
||||
#define SPI_FLASH_DISABLE() ( P4OUT |= BV(FLASH_CS) )
|
||||
|
||||
#define SPI_FLASH_HOLD() ( P4OUT &= ~BV(FLASH_HOLD) )
|
||||
#define SPI_FLASH_UNHOLD() ( P4OUT |= BV(FLASH_HOLD) )
|
||||
|
||||
/*
|
||||
* SPI bus - CC2420 pin configuration.
|
||||
*/
|
||||
|
||||
#define CC2420_CONF_SYMBOL_LOOP_COUNT 500
|
||||
|
||||
/*
|
||||
* SPI bus - CC2420 pin configuration.
|
||||
*/
|
||||
|
||||
#define FIFO_P 6
|
||||
#define FIFO 7
|
||||
#define CCA 6
|
||||
|
||||
#define SFD 4
|
||||
#define CSN 0
|
||||
#define VREG_EN 5
|
||||
#define RESET_N 6
|
||||
|
||||
|
||||
/* - Input: FIFOP from CC2420 - ATMEGA128 PORTE, PIN6 */
|
||||
#define CC2420_FIFOP_PORT(type) P##type##E
|
||||
#define CC2420_FIFOP_PIN 6
|
||||
/* - Input: FIFO from CC2420 - ATMEGA128 PORTB, PIN7 */
|
||||
#define CC2420_FIFO_PORT(type) P##type##B
|
||||
#define CC2420_FIFO_PIN 7
|
||||
/* - Input: CCA from CC2420 - ATMEGA128 PORTD, PIN6 */
|
||||
#define CC2420_CCA_PORT(type) P##type##D
|
||||
#define CC2420_CCA_PIN 6
|
||||
/* - Input: SFD from CC2420 - ATMEGA128 PORTD, PIN4 */
|
||||
#define CC2420_SFD_PORT(type) P##type##D
|
||||
#define CC2420_SFD_PIN 4
|
||||
/* - Output: SPI Chip Select (CS_N) - ATMEGA128 PORTB, PIN0 */
|
||||
#define CC2420_CSN_PORT(type) P##type##B
|
||||
#define CC2420_CSN_PIN 0
|
||||
/* - Output: VREG_EN to CC2420 - ATMEGA128 PORTA, PIN5 */
|
||||
#define CC2420_VREG_PORT(type) P##type##A
|
||||
#define CC2420_VREG_PIN 5
|
||||
/* - Output: RESET_N to CC2420 - ATMEGA128 PORTA, PIN6 */
|
||||
#define CC2420_RESET_PORT(type) P##type##A
|
||||
#define CC2420_RESET_PIN 6
|
||||
|
||||
#define CC2420_IRQ_VECTOR INT6_vect
|
||||
|
||||
/* Pin status. */
|
||||
#define CC2420_FIFOP_IS_1 (!!(CC2420_FIFOP_PORT(IN) & BV(CC2420_FIFOP_PIN)))
|
||||
#define CC2420_FIFO_IS_1 (!!(CC2420_FIFO_PORT(IN) & BV(CC2420_FIFO_PIN)))
|
||||
#define CC2420_CCA_IS_1 (!!(CC2420_CCA_PORT(IN) & BV(CC2420_CCA_PIN)))
|
||||
#define CC2420_SFD_IS_1 (!!(CC2420_SFD_PORT(IN) & BV(CC2420_SFD_PIN)))
|
||||
|
||||
/* The CC2420 reset pin. */
|
||||
#define SET_RESET_INACTIVE() (CC2420_RESET_PORT(ORT) |= BV(CC2420_RESET_PIN))
|
||||
#define SET_RESET_ACTIVE() (CC2420_RESET_PORT(ORT) &= ~BV(CC2420_RESET_PIN))
|
||||
|
||||
/* CC2420 voltage regulator enable pin. */
|
||||
#define SET_VREG_ACTIVE() (CC2420_VREG_PORT(ORT) |= BV(CC2420_VREG_PIN))
|
||||
#define SET_VREG_INACTIVE() (CC2420_VREG_PORT(ORT) &= ~BV(CC2420_VREG_PIN))
|
||||
|
||||
/* CC2420 rising edge trigger for external interrupt 6 (FIFOP).
|
||||
* Enable the external interrupt request for INT6.
|
||||
* See Atmega128 datasheet about EICRB Register
|
||||
*/
|
||||
#define CC2420_FIFOP_INT_INIT() do {\
|
||||
EICRB |= 0x30; \
|
||||
CC2420_CLEAR_FIFOP_INT(); \
|
||||
} while (0)
|
||||
|
||||
/* FIFOP on external interrupt 6. */
|
||||
#define CC2420_ENABLE_FIFOP_INT() do { EIMSK |= 0x40; } while (0)
|
||||
#define CC2420_DISABLE_FIFOP_INT() do { EIMSK &= ~0x40; } while (0)
|
||||
#define CC2420_CLEAR_FIFOP_INT() do { EIFR = 0x40; } while (0)
|
||||
|
||||
/*
|
||||
* Enables/disables CC2420 access to the SPI bus (not the bus).
|
||||
* (Chip Select)
|
||||
*/
|
||||
#define CC2420_SPI_ENABLE() (PORTB &= ~BV(CSN)) /* ENABLE CSn (active low) */
|
||||
#define CC2420_SPI_DISABLE() (PORTB |= BV(CSN)) /* DISABLE CSn (active low) */
|
||||
|
||||
#endif /* __PLATFORM_CONF_H__ */
|
||||
Loading…
Reference in a new issue