Renamed a config define to better match contiki's naming philosophy

This commit is contained in:
George Oikonomou 2012-04-01 21:43:22 +01:00
parent 2d0d54c380
commit 5240519dd9
6 changed files with 16 additions and 16 deletions

View file

@ -98,7 +98,7 @@ uint8_t rf_error = 0;
#endif
/*---------------------------------------------------------------------------*/
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
PROCESS(cc2430_rf_process, "CC2430 RF driver");
#endif
/*---------------------------------------------------------------------------*/
@ -152,7 +152,7 @@ flush_rx()
cc2430_rf_command(ISFLUSHRX);
cc2430_rf_command(ISFLUSHRX);
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
IEN2 |= RFIE;
#endif
#if CC2430_RFERR_INTERRUPT
@ -338,7 +338,7 @@ init(void)
RFIF &= ~(IRQ_FIFOP);
S1CON &= ~(RFIF_0 | RFIF_1);
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
IEN2 |= RFIE;
#endif
@ -351,7 +351,7 @@ init(void)
RF_RX_LED_OFF();
rf_initialized = 1;
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
process_start(&cc2430_rf_process, NULL);
#endif
@ -476,7 +476,7 @@ read(void *buf, unsigned short bufsize)
#endif /* CC2420_CONF_CHECKSUM */
/* Don't interrupt us while emptying the FIFO */
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
IEN2 &= ~RFIE;
#endif
#if CC2430_RFERR_INTERRUPT
@ -576,7 +576,7 @@ read(void *buf, unsigned short bufsize)
RF_RX_LED_OFF();
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
IEN2 |= RFIE;
#endif
#if CC2430_RFERR_INTERRUPT
@ -688,7 +688,7 @@ const struct radio_driver cc2430_rf_driver =
off,
};
/*---------------------------------------------------------------------------*/
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(cc2430_rf_process, ev, data)
{

View file

@ -77,7 +77,7 @@ int8_t cc2430_rf_channel_set(uint8_t channel);
uint8_t cc2430_rf_power_set(uint8_t new_power);
void cc2430_rf_set_addr(unsigned pan, unsigned addr, const uint8_t *ieee_addr);
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
extern void cc2430_rf_ISR( void ) __interrupt (RF_VECTOR);
#endif
#if CC2430_RFERR_INTERRUPT

View file

@ -50,7 +50,7 @@ uint8_t rf_error = 0;
PROCESS_NAME(cc2430_rf_process);
#if !SHORTCUTS_CONF_NETSTACK
#if !NETSTACK_CONF_SHORTCUTS
/*---------------------------------------------------------------------------*/
/**
* RF interrupt service routine.

View file

@ -69,9 +69,9 @@
* - process_post_synch() in tcpip_uipcall (we call the relevant pthread)
* - mac_call_sent_callback() is replaced with sent() in various places
*
* These are good things to do, we reduce stack usage, RAM size and code size
* These are good things to do, they reduce stack usage and prevent crashes
*/
#define SHORTCUTS_CONF_NETSTACK 1
#define NETSTACK_CONF_SHORTCUTS 1
/*
* Sensors

View file

@ -82,15 +82,15 @@
* When set, the RF driver is no longer a contiki process and the RX ISR is
* disabled. Instead of polling the radio process when data arrives, we
* periodically check for data by directly invoking the driver from main()
*
* When set, this directive also configures the following bypasses:
* - process_post_synch() in tcpip_input() (we call packet_input())
* - process_post_synch() in tcpip_uipcall (we call the relevant pthread)
* - mac_call_sent_callback() is replaced with sent() in various places
*
* These are good things to do, we reduce stack usage, RAM size and code size
* These are good things to do, they reduce stack usage and prevent crashes
*/
#define SHORTCUTS_CONF_NETSTACK 1
#define NETSTACK_CONF_SHORTCUTS 1
/*
* Sensors

View file

@ -32,7 +32,7 @@ PROCESS_NAME(viztool_process);
PROCESS_NAME(batmon_process);
#endif
#if SHORTCUTS_CONF_NETSTACK
#if NETSTACK_CONF_SHORTCUTS
static __data int len;
#endif
@ -306,7 +306,7 @@ main(void)
#endif
r = process_run();
} while(r > 0);
#if SHORTCUTS_CONF_NETSTACK
#if NETSTACK_CONF_SHORTCUTS
len = NETSTACK_RADIO.pending_packet();
if(len) {
packetbuf_clear();