deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

added support for SEED-EYE board (http://rtn.sssup.it/index.php/hardware/seed-eye)

Browse source
This commit is contained in:
Giovanni `evilaliv3` Pellerano 2012-12-17 09:24:35 +01:00
parent 70e46f3248
commit fdd380e7ca
13 changed files with 2447 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

37
platform/seedeye/Makefile.seedeye Normal file
View file

@ -0,0 +1,37 @@
ifndef CONTIKI
$(error CONTIKI not defined! You must specify where CONTIKI resides!)
endif
ifdef SEEDEYE_ID
CFLAGS += -DSEEDEYE_ID=${SEEDEYE_ID}
endif
ifdef UIP_CONF_IPV6
CFLAGS += -DWITH_UIP6=1
endif
CONTIKI_TARGET_DIRS = . dev dev/mrf24j40 apps net
CONTIKI_TARGET_MAIN = ${addprefix $(OBJECTDIR)/,contiki-main.o}
CONTIKI_PLAT_DEFS += -D __USE_TIMER__
CONTIKI_PLAT_DEFS += -D __USE_TIMER_1__
CONTIKI_PLAT_DEFS += -D __USE_TIMER_23__
CONTIKI_PLAT_DEFS += -D __USE_UART__
CONTIKI_PLAT_DEFS += -D __USE_UART_PORT1A__
CONTIKI_PLAT_DEFS += -D __USE_UART_PORT1B__
CONTIKI_PLAT_DEFS += -D __USE_SPI__
CONTIKI_PLAT_DEFS += -D __USE_SPI_PORT3A__
CONTIKI_PLAT_DEFS += -D __USE_MRF24J40_SPI_PORT_3A__
CONTIKI_PLAT_DEFS += -D __USE_UART_PORT1A_FOR_SLIP__
CONTIKI_PLAT_DEFS += -D __USE_UART_PORT1B_FOR_DEBUG__
CONTIKI_PLAT_DEFS += -D MRF24J40MB -D ADD_RSSI_AND_LQI_TO_PACKET
CONTIKI_CORE_SOURCEFILES = leds.c sensors.c slip.c
CONTIKI_TARGET_SOURCEFILES += contiki-seedeye-main.c init-net.c leds-arch.c battery-sensor.c button-sensor.c radio-sensor.c
CONTIKI_TARGET_SOURCEFILES += mrf24j40.c
CONTIKI_TARGET_SOURCEFILES += $(CONTIKI_CORE_SOURCEFILES)
CONTIKI_SOURCEFILES += $(CONTIKI_TARGET_SOURCEFILES)
include $(CONTIKI)/cpu/pic32/Makefile.pic32

139
platform/seedeye/contiki-conf.h Normal file
View file

@ -0,0 +1,139 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \file contiki-conf.h
* \brief Contiki configuration file for the SEEDEYE port.
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-21
*/
#ifndef CONTIKI_CONF_H
#define CONTIKI_CONF_H
#include <inttypes.h>
#include "platform-conf.h"
#define CCIF
#define CLIF
typedef uint8_t u8_t;
typedef uint16_t u16_t;
typedef uint32_t u32_t;
typedef int32_t s32_t;
typedef uint16_t uip_stats_t;
typedef uint32_t clock_time_t;
typedef uint32_t rtimer_clock_t;
#define RTIMER_CLOCK_LT(a,b) ((int32_t)((a)-(b)) < 0)
#define RF_CHANNEL 13
#define PROFILE_CONF_ON 0
#ifndef ENERGEST_CONF_ON
#define ENERGEST_CONF_ON 1
#endif /* ENERGEST_CONF_ON */
#ifdef WITH_UIP6
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC nullrdc_driver
#define NETSTACK_CONF_RADIO mrf24j40_driver
#define RIMEADDR_CONF_SIZE 8
#else
#define NETSTACK_CONF_NETWORK rime_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC nullrdc_driver
#define NETSTACK_CONF_RADIO mrf24j40_driver
#define RIMEADDR_CONF_SIZE 2
#endif
#define RDC_CONF_HARDWARE_CSMA 1
#define CONTIKIMAC_CONF_WITH_CONTIKIMAC_HEADER 0
#ifdef WITH_UIP6
#define UIP_CONF_ROUTER 1
#ifndef UIP_CONF_IPV6_RPL
#define UIP_CONF_IPV6_RPL 1
#endif /* UIP_CONF_IPV6_RPL */
/* IPv6 configuration options */
#define UIP_CONF_IPV6 1
#define UIP_CONF_DS6_NBR_NBU 20 /* number of neighbors */
#define UIP_CONF_DS6_ROUTE_NBU 20 /* number of routes */
#define UIP_CONF_ND6_SEND_RA 0
#define UIP_CONF_ND6_REACHABLE_TIME 600000
#define UIP_CONF_ND6_RETRANS_TIMER 10000
#ifndef QUEUEBUF_CONF_NUM
#define QUEUEBUF_CONF_NUM 16
#endif /* QUEUEBUF_CONF_NUM */
/* UDP configuration options */
#define UIP_CONF_UDP 1
#define UIP_CONF_UDP_CHECKSUMS 1
#define UIP_CONF_UDP_CONNS 10
/* 6lowpan options (for ipv6) */
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD 63
#ifndef SICSLOWPAN_CONF_FRAG
#define SICSLOWPAN_CONF_FRAG 1
#define SICSLOWPAN_CONF_MAXAGE 8
#endif /* SICSLOWPAN_CONF_FRAG */
/* General configuration options */
#define UIP_CONF_STATISTICS 0
#define UIP_CONF_LOGGING 0
#define UIP_CONF_BROADCAST 1
#define UIP_CONF_LLH_LEN 0
#define UIP_CONF_LL_802154 1
#endif
/* include the project config */
/* PROJECT_CONF_H might be defined in the project Makefile */
#ifdef PROJECT_CONF_H
#include PROJECT_CONF_H
#endif /* PROJECT_CONF_H */
#endif /* CONTIKI_CONF_H */

180
platform/seedeye/contiki-seedeye-main.c Normal file
View file

@ -0,0 +1,180 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup SeedEye Contiki SEEDEYE Platform
*
* @{
*/
/**
* \file contiki-seedeye-main.c
* \brief Main program for the SEEDEYE port.
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-21
*/
#include <contiki.h>
#include <clock.h>
#include <lib/random.h>
#include <dev/leds.h>
#include "dev/button-sensor.h"
#include "dev/battery-sensor.h"
#include <dev/watchdog.h>
#include <pic32.h>
#include <pic32_clock.h>
#include <debug-uart.h>
#include <init-net.h>
#include <stdio.h>
#include <string.h>
#define DEBUG 1
#if DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
#if UIP_CONF_ROUTER
#ifndef UIP_ROUTER_MODULE
#ifdef UIP_CONF_ROUTER_MODULE
#define UIP_ROUTER_MODULE UIP_CONF_ROUTER_MODULE
#else /* UIP_CONF_ROUTER_MODULE */
#define UIP_ROUTER_MODULE rimeroute
#endif /* UIP_CONF_ROUTER_MODULE */
#endif /* UIP_ROUTER_MODULE */
extern const struct uip_router UIP_ROUTER_MODULE;
#endif /* UIP_CONF_ROUTER */
SENSORS(&button_sensor);
/*---------------------------------------------------------------------------*/
static void
print_processes(struct process *const processes[])
{
PRINTF("Starting:\n");
while(*processes != NULL) {
PRINTF(" '%s'\n", (*processes)->name);
processes++;
}
PRINTF("\n");
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
int32_t r;
/* Initalizing main hardware */
pic32_init();
watchdog_init();
leds_init();
clock_init();
dbg_setup_uart(UART_DEBUG_BAUDRATE);
PRINTF("Initialising Node: %d\n", SEEDEYE_ID);
printf("CPU Clock: %uMhz\n", pic32_clock_get_system_clock() / 1000000);
printf("Peripheral Clock: %uMhz\n", pic32_clock_get_peripheral_clock() / 1000000);
random_init(SEEDEYE_ID);
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
rtimer_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
process_start(&sensors_process, NULL);
SENSORS_ACTIVATE(battery_sensor);
leds_on(LEDS_RED);
/* Inizialize Network! */
init_net(SEEDEYE_ID);
leds_on(LEDS_RED);
/* Starting autostarting process */
print_processes(autostart_processes);
autostart_start(autostart_processes);
PRINTF("Processes running\n");
leds_off(LEDS_ALL);
watchdog_start();
/*
* This is the scheduler loop.
*/
while(1) {
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
watchdog_stop();
asm volatile("wait");
watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
return 0;
}
/*---------------------------------------------------------------------------*/
/** @} */

143
platform/seedeye/dev/battery-sensor.c Normal file
View file

@ -0,0 +1,143 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup SeedEye Contiki SEEDEYE Platform
*
* @{
*/
/**
* \file battery-sensor.c
* \brief Battery Sensor
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-07-04
*/
#include <dev/battery-sensor.h>
#include <p32xxxx.h>
/*---------------------------------------------------------------------------*/
PROCESS(battery_process, "battery sensor");
/*---------------------------------------------------------------------------*/
const struct sensors_sensor battery_sensor;
#define BATTERY_SAMPLES 10
static uint16_t battery_samples[BATTERY_SAMPLES];
static uint8_t counter = 0;
static uint8_t sensor_status = 0;
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
uint32_t tmp = 0;
uint8_t i;
for(i = 0; i < BATTERY_SAMPLES; ++i) {
tmp += battery_samples[i];
}
return tmp / BATTERY_SAMPLES;
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int c)
{
// all PORTB = Digital; RB10 = analog
AD1PCFG = 0b1111110111111111;
// SSRC bit = 111 implies internal counter ends sampling and starts converting
AD1CON1 = 0b0000000011100000;
AD1CHS = 0b00000000000010100000000000000000;
AD1CSSL = 0;
// Manual Sample, Tad = internal 6 TPB
AD1CON3 = 0x1F02;
AD1CON2 = 0;
// Turn ADC on
AD1CON1SET = 0b1000000000000000;
process_start(&battery_process, NULL);
sensor_status = 1;
return 0;
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
return sensor_status;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(battery_sensor, BATTERY_SENSOR, value, configure, status);
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(battery_process, ev, data)
{
PROCESS_BEGIN();
while(1) {
static struct etimer et;
etimer_set(&et, CLOCK_SECOND);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
// start converting
AD1CON1SET = 0b0000000000000010;
while (!(AD1CON1 & 0b0000000000000001)) {
; // wait conversion finish
}
// read the conversion result
battery_samples[counter] = ADC1BUF0;
counter = (counter + 1) % BATTERY_SAMPLES;
}
PROCESS_END();
}
/** @} */

138
platform/seedeye/dev/button-sensor.c Normal file
View file

@ -0,0 +1,138 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup SeedEye Contiki SEEDEYE Platform
*
* @{
*/
/**
* \file button-sensor.c
* \brief Button Sensor
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-04-24
*/
#include <dev/button-sensor.h>
#include <p32xxxx.h>
#include <pic32_irq.h>
#define button_read PORTDbits.RD5
const struct sensors_sensor button_sensor;
static struct timer debouncetimer;
static int status(int type);
static uint8_t sensor_status = 0;
ISR(_CHANGE_NOTICE_VECTOR)
{
ENERGEST_ON(ENERGEST_TYPE_IRQ);
if(timer_expired(&debouncetimer)) {
timer_set(&debouncetimer, CLOCK_SECOND / 4);
sensors_changed(&button_sensor);
}
IFS1CLR = _IFS1_CNIF_MASK;
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
void
button_press(void)
{
sensors_changed(&button_sensor);
}
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
return button_read || !timer_expired(&debouncetimer);
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int value)
{
switch (type) {
case SENSORS_ACTIVE:
if (value) {
if(!status(SENSORS_ACTIVE)) {
timer_set(&debouncetimer, 0);
TRISDbits.TRISD5 = 1;
CNCON = 0;
CNCONSET = 1 << _CNCON_ON_POSITION | 1 << _CNCON_SIDL_POSITION;
CNEN = 1 << _CNEN_CNEN14_POSITION;
CNPUE = 1 << _CNPUE_CNPUE14_POSITION;
IEC1CLR = _IEC1_CNIE_MASK;
IFS1CLR = _IFS1_CNIF_MASK;
IPC6CLR = _IPC6_CNIP_MASK;
IPC6SET = 6 << _IPC6_CNIP_POSITION;
IEC1SET = 1 << _IEC1_CNIE_POSITION;
sensor_status = 1;
}
}
return 1;
}
sensor_status = 0;
return 0;
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
return sensor_status;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(button_sensor, BUTTON_SENSOR, value, configure, status);
/*---------------------------------------------------------------------------*/
/** @} */

110
platform/seedeye/dev/leds-arch.c Normal file
View file

@ -0,0 +1,110 @@
/*
* Contiki PIC32 Port project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup SeedEye Contiki SEEDEYE Platform
*
* @{
*/
/**
* \file leds-arch.c
* \brief LEDs Specific Arch Conf
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-21
*/
#include "contiki-conf.h"
#include "dev/leds.h"
#include "p32xxxx.h"
/*
* IPM2 has 2 red LEDs, LED1 is mapped to the Contiki
* LEDS_RED and LED2 is mapped to LEDS_GREEN.
*/
#define LEDS_CONF_GREEN 0x04
#define LEDS_CONF_RED 0x08
#define SEEDEYE_BOARD_V2_CAT3(x,y,z) x ## y ## z
/* NOTE: Led0 works in a negated logic. */
#define led_0_on (LATCCLR = LEDS_CONF_RED)
#define led_0_off (LATCSET = LEDS_CONF_RED)
#define led_0_toggle (LATCINV = LEDS_CONF_RED)
#define led_1_on (LATCSET = LEDS_CONF_GREEN)
#define led_1_off (LATCCLR = LEDS_CONF_GREEN)
#define led_1_toggle (LATCINV = LEDS_CONF_GREEN)
#define led_on(n) SEEDEYE_BOARD_V2_CAT3(led_,n,_on)
#define led_off(n) SEEDEYE_BOARD_V2_CAT3(led_,n,_off)
#define led_toggle(n) SEEDEYE_BOARD_V2_CAT3(led_,n,_toggle)
/*---------------------------------------------------------------------------*/
void
leds_arch_init(void)
{
TRISCCLR = 0x0C;
led_0_off;
led_1_off;
}
/*---------------------------------------------------------------------------*/
unsigned char
leds_arch_get(void)
{
return (PORTC & LEDS_CONF_RED ? 0 : LEDS_RED) | (~PORTC & LEDS_CONF_GREEN ? 0 : LEDS_GREEN);
}
/*---------------------------------------------------------------------------*/
void
leds_arch_set(unsigned char leds)
{
if(leds & LEDS_RED) {
led_0_on;
} else {
led_0_off;
}
if(leds & LEDS_GREEN) {
led_1_on;
} else {
led_1_off;
}
}
/*---------------------------------------------------------------------------*/
/** @} */

945
platform/seedeye/dev/mrf24j40/mrf24j40.c Normal file
View file

@ -0,0 +1,945 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup mrf24j40 MRF24J40 Driver
*
* @{
*/
/**
* \file mrf24j40.c
*
* \brief MRF24J40 Driver
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-21
*/
#include "contiki.h"
#include "mrf24j40.h"
#include "mrf24j40_arch.h"
#include <pic32_spi.h>
#include <pic32_irq.h>
#include "net/packetbuf.h"
#include "net/netstack.h"
#define DEBUG 0
#if DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
PROCESS(mrf24j40_process, "MRF24J40 driver");
/*---------------------------------------------------------------------------*/
static volatile uint8_t mrf24j40_last_lqi;
static volatile uint8_t mrf24j40_last_rssi;
static volatile uint8_t status_tx;
static volatile uint8_t pending;
static volatile uint8_t receive_on;
/*---------------------------------------------------------------------------*/
static void
set_short_add_mem(uint8_t addr, uint8_t val)
{
const uint8_t tmp = MRF24J40_INTERRUPT_ENABLE_STAT();
uint8_t msg[2];
msg[0] = (addr << 1) | 0x01;
msg[1] = val;
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_CLR();
}
MRF24J40_CSn_LOW();
MRF24J40_SPI_PORT_WRITE(msg, 2);
MRF24J40_CSn_HIGH();
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_SET();
}
}
/*---------------------------------------------------------------------------*/
static void
set_long_add_mem(uint16_t addr, uint8_t val)
{
const uint8_t tmp = MRF24J40_INTERRUPT_ENABLE_STAT();
uint8_t msg[3];
msg[0] = (((uint8_t) (addr >> 3)) & 0x7F) | 0x80;
msg[1] = (((uint8_t) (addr << 5)) & 0xE0) | 0x10;
msg[2] = val;
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_CLR();
}
MRF24J40_CSn_LOW();
MRF24J40_SPI_PORT_WRITE(msg, 3);
MRF24J40_CSn_HIGH();
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_SET();
}
}
/*---------------------------------------------------------------------------*/
static uint8_t
get_short_add_mem(uint8_t addr)
{
const uint8_t tmp = MRF24J40_INTERRUPT_ENABLE_STAT();
uint8_t ret_val;
addr <<= 1;
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_CLR();
}
MRF24J40_CSn_LOW();
MRF24J40_SPI_PORT_WRITE(&addr, 1);
MRF24J40_SPI_PORT_READ(&ret_val, 1);
MRF24J40_CSn_HIGH();
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_SET();
}
return ret_val;
}
/*---------------------------------------------------------------------------*/
static uint8_t
get_long_add_mem(uint16_t addr)
{
const uint8_t tmp = MRF24J40_INTERRUPT_ENABLE_STAT();
uint8_t ret_val;
uint8_t msg[2];
msg[0] = (((uint8_t) (addr >> 3)) & 0x7F) | 0x80;
msg[1] = ((uint8_t) (addr << 5)) & 0xE0;
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_CLR();
}
MRF24J40_CSn_LOW();
MRF24J40_SPI_PORT_WRITE(msg, 2);
MRF24J40_SPI_PORT_READ(&ret_val, 1);
MRF24J40_CSn_HIGH();
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_SET();
}
return ret_val;
}
/*---------------------------------------------------------------------------*/
static void
reset_rf_state_machine(void)
{
/*
* Reset RF state machine
*/
const uint8_t rfctl = get_short_add_mem(MRF24J40_RFCTL);
set_short_add_mem(MRF24J40_RFCTL, rfctl | 0b00000100);
set_short_add_mem(MRF24J40_RFCTL, rfctl & 0b11111011);
clock_delay_usec(2500);
}
/*---------------------------------------------------------------------------*/
void
flush_rx_fifo(void)
{
set_short_add_mem(MRF24J40_RXFLUSH, get_short_add_mem(MRF24J40_RXFLUSH) | 0b00000001);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Set the channel
*
* This routine sets the rx/tx channel
*/
void
mrf24j40_set_channel(uint16_t ch)
{
set_long_add_mem(MRF24J40_RFCON0, ((ch - 11) << 4) | 0b00000011);
reset_rf_state_machine();
}
/*---------------------------------------------------------------------------*/
/**
* \brief Store MAC PAN ID
*
* This routine sets the MAC PAN ID in the MRF24J40.
*/
void
mrf24j40_set_panid(uint16_t id)
{
set_short_add_mem(MRF24J40_PANIDL, (uint8_t) id);
set_short_add_mem(MRF24J40_PANIDH, (uint8_t) (id >> 8));
}
/*---------------------------------------------------------------------------*/
/**
* \brief Store short MAC address
*
* This routine sets the short MAC address in the MRF24J40.
*/
void
mrf24j40_set_short_mac_addr(uint16_t addr)
{
set_short_add_mem(MRF24J40_SADRL, (uint8_t) addr);
set_short_add_mem(MRF24J40_SADRH, (uint8_t) (addr >> 8));
}
/*---------------------------------------------------------------------------*/
/**
* \brief Store extended MAC address
*
* This routine sets the extended MAC address in the MRF24J40.
*/
void
mrf24j40_set_extended_mac_addr(uint64_t addr)
{
set_short_add_mem(MRF24J40_EADR7, (uint8_t) addr);
set_short_add_mem(MRF24J40_EADR6, (uint8_t) (addr >> 8));
set_short_add_mem(MRF24J40_EADR5, (uint8_t) (addr >> 16));
set_short_add_mem(MRF24J40_EADR4, (uint8_t) (addr >> 24));
set_short_add_mem(MRF24J40_EADR3, (uint8_t) (addr >> 32));
set_short_add_mem(MRF24J40_EADR2, (uint8_t) (addr >> 40));
set_short_add_mem(MRF24J40_EADR1, (uint8_t) (addr >> 48));
set_short_add_mem(MRF24J40_EADR0, (uint8_t) (addr >> 56));
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get short MAC address
*
* This routine gets the short MAC address stored in the MRF24J40.
*/
void
mrf24j40_get_short_mac_addr(uint16_t *addr)
{
*(((uint8_t *) & addr)) = get_short_add_mem(MRF24J40_SADRH);
*(((uint8_t *) & addr) + 1) = get_short_add_mem(MRF24J40_SADRL);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Gets extended MAC address
*
* This routine gets the extended MAC address stored in the MRF24J40.
*/
void
mrf24j40_get_extended_mac_addr(uint64_t *addr)
{
*(((uint8_t *) & addr)) = get_short_add_mem(MRF24J40_EADR7);
*(((uint8_t *) & addr) + 1) = get_short_add_mem(MRF24J40_EADR6);
*(((uint8_t *) & addr) + 2) = get_short_add_mem(MRF24J40_EADR5);
*(((uint8_t *) & addr) + 3) = get_short_add_mem(MRF24J40_EADR4);
*(((uint8_t *) & addr) + 4) = get_short_add_mem(MRF24J40_EADR3);
*(((uint8_t *) & addr) + 5) = get_short_add_mem(MRF24J40_EADR2);
*(((uint8_t *) & addr) + 6) = get_short_add_mem(MRF24J40_EADR1);
*(((uint8_t *) & addr) + 7) = get_short_add_mem(MRF24J40_EADR0);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Set TX power
*
* This routine sets the transmission power of the MRF24J40.
*/
void
mrf24j40_set_tx_power(uint8_t pwr)
{
set_long_add_mem(MRF24J40_RFCON3, pwr);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get radio status
*
* This routine returns the MRF24J40 status.
*/
uint8_t
mrf24j40_get_status(void)
{
return get_long_add_mem(MRF24J40_RFSTATE);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get the RSSI
*
* This routine returns the rssi value mesured in dbm
* Note: to convert the returned value to dBm, use the table 3-8 available
* in the MRF24J40 datasheet.
*/
uint8_t
mrf24j40_get_rssi(void)
{
/*
* 3.6.1 RSSI FIRMWARE REQUEST (RSSI MODE1)
* In this mode, the host microcontroller sends a request
* to calculate RSSI, then waits until it is done and then
* reads the RSSI value. The steps are:
*
* 1.
* Set RSSIMODE1 0x3E<7> – Initiate RSSI
* calculation.
*
* 2.
* Wait until RSSIRDY 0x3E<0> is set to ‘1’ – RSSI
* calculation is complete.
*
* 3.
* Read RSSI 0x210<7:0> – The RSSI register
* contains the averaged RSSI received power
* level for 8 symbol periods.
*/
/* Initiate RSSI calculation */
set_short_add_mem(MRF24J40_BBREG6, get_short_add_mem(MRF24J40_BBREG6) | 0b10000000);
/* Wait until RSSI calculation is done */
while(!(get_short_add_mem(MRF24J40_BBREG6) & 0b00000001)) {
;
}
mrf24j40_last_rssi = get_long_add_mem(MRF24J40_RSSI);
return mrf24j40_last_rssi;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get the last read RSSI
*
* This routine returns the last rssi value mesured in dbm
* Note: to convert the returned value to dBm, use the table 3-8 available
* in the MRF24J40 datasheet.
*/
uint8_t
mrf24j40_get_last_rssi(void)
{
return mrf24j40_last_rssi;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get the last read LQI
*
* This routine returns the last lqi
*/
uint8_t
mrf24j40_get_last_lqi(void)
{
return mrf24j40_last_lqi;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Store message
*
* This routine stores a buffer of buf_len bytes in the TX_FIFO
* buffer of the MRF24J40.
*/
int32_t
mrf24j40_set_txfifo(const uint8_t *buf, uint8_t buf_len)
{
uint8_t i;
if((buf_len == 0) || (buf_len > 128)) {
return -1;
}
set_long_add_mem(MRF24J40_NORMAL_TX_FIFO, 0);
set_long_add_mem(MRF24J40_NORMAL_TX_FIFO + 1, buf_len);
for(i = 0; i < buf_len; ++i) {
set_long_add_mem(MRF24J40_NORMAL_TX_FIFO + 2 + i, buf[i]);
}
return 0;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get message
*
* This routine is used to retrieve a message stored in the RX_FIFO
*/
int32_t
mrf24j40_get_rxfifo(uint8_t *buf, uint8_t buf_len)
{
uint8_t i, len;
MRF24J40_INTERRUPT_ENABLE_CLR();
/* Disable packet reception */
set_short_add_mem(MRF24J40_BBREG1, 0b00000100);
/* Get packet length discarding 2 bytes (LQI, RSSI) */
len = get_long_add_mem(MRF24J40_RX_FIFO) - 2;
if(len <= buf_len) {
/* Get the packet */
for(i = 0; i < len; ++i) {
buf[i] = get_long_add_mem(MRF24J40_RX_FIFO + i + 1);
}
/*
* packet len includes = header + paylod + LQI + RSSI
*/
#ifdef ADD_RSSI_AND_LQI_TO_PACKET
mrf24j40_last_lqi = get_long_add_mem(MRF24J40_RX_FIFO + len + 3);
mrf24j40_last_rssi = get_long_add_mem(MRF24J40_RX_FIFO + len + 4);
#endif
} else {
len = 0;
}
/* Enable packet reception */
set_short_add_mem(MRF24J40_BBREG1, 0b00000000);
pending = 0;
#ifdef MRF24J40_PROMISCUOUS_MODE
/*
* Flush RX FIFO as suggested by the work around 1 in
* MRF24J40 Silicon Errata.
*/
flush_rx_fifo();
#endif
MRF24J40_INTERRUPT_ENABLE_SET();
return len == 0 ? -1 : len;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Start sleep
*
* This routine puts the radio in sleep mode.
*/
static void
put_to_sleep(void)
{
/* Prepare WAKE pin: */
MRF24J40_WAKE = 0;
/* Enable Immediate Wake-up mode */
set_short_add_mem(MRF24J40_WAKECON, 0b10000000);
set_short_add_mem(MRF24J40_SOFTRST, 0b00000100);
set_short_add_mem(MRF24J40_RXFLUSH, 0b01100000);
/* Put to sleep */
set_short_add_mem(MRF24J40_SLPACK, 0b10000000);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Awake the radio
*
* This routine turns on and sets the radio on receiving mode.
* Note: After performing this routine the radio is in the receiving state.
*/
static void
wake(void)
{
/* Wake-up */
MRF24J40_WAKE = 1;
/* RF State Machine reset */
set_short_add_mem(MRF24J40_RFCTL, 0b00000100);
set_short_add_mem(MRF24J40_RFCTL, 0b00000000);
clock_delay_usec(2500);
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_on(void)
{
if(!receive_on) {
wake();
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
receive_on = 1;
}
return 1;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_off(void)
{
if(receive_on) {
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
receive_on = 0;
put_to_sleep();
}
return 1;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Init transceiver
*
* This routine initializes the radio transceiver
*/
int
mrf24j40_init(void)
{
uint8_t i;
/* Set the IO pins direction */
MRF24J40_PINDIRECTION_INIT();
/* Set interrupt registers and reset flags */
MRF24J40_INTERRUPT_INIT(6, 3);
if(MRF24J40_SPI_PORT_INIT(10000000, SPI_DEFAULT) < 0)
return -1;
PRINTF("MRF24J40 Initialization started\n");
MRF24J40_HARDRESET_LOW();
clock_delay_usec(2500);
MRF24J40_HARDRESET_HIGH();
clock_delay_usec(2500);
/*
* bit 7:3 reserved: Maintain as ‘0’
* bit 2 RSTPWR: Power Management Reset bit
* 1 = Reset power management circuitry (bit is automatically cleared to ‘0’ by hardware)
* bit 1 RSTBB: Baseband Reset bit
* 1 = Reset baseband circuitry (bit is automatically cleared to ‘0’ by hardware)
* bit 0 RSTMAC: MAC Reset bit
* 1 = Reset MAC circuitry (bit is automatically cleared to ‘0’ by hardware)
*/
set_short_add_mem(MRF24J40_SOFTRST, 0b00000111);
/*
* wait until the radio reset is completed
*/
do {
i = get_short_add_mem(MRF24J40_SOFTRST);
} while((i & 0b0000111) != 0);
clock_delay_usec(2500);
/*
* bit 7 FIFOEN: FIFO Enable bit 1 = Enabled (default). Always maintain this bit as a ‘1’.
* bit 6 reserved: Maintain as ‘0’
* bit 5:2 TXONTS<3:0>: Transmitter Enable On Time Symbol bits(1)
* Transmitter on time before beginning of packet. Units: symbol period (16 μs).
* Minimum value: 0x1. Default value: 0x2 (2 * 16 μs = 32 μs). Recommended value: 0x6 (6 * 16 μs = 96 μs).
* bit 1:0 TXONT<8:7>: Transmitter Enable On Time Tick bits(1)
* Transmitter on time before beginning of packet. TXONT is a 9-bit value. TXONT<6:0> bits are located
* in SYMTICKH<7:1>. Units: tick (50 ns). Default value = 0x028 (40 * 50 ns = 2 μs).
*/
set_short_add_mem(MRF24J40_PACON2, 0b10011000);
mrf24j40_set_channel(MRF24J40_DEFAULT_CHANNEL);
set_long_add_mem(MRF24J40_RFCON1, 0b00000010); /* program the RF and Baseband Register */
/* as suggested by the datasheet */
set_long_add_mem(MRF24J40_RFCON2, 0b10000000); /* enable PLL */
mrf24j40_set_tx_power(0b00000000); /* set power 0dBm (plus 20db power amplifier 20dBm)*/
/*
* Set up
*
* bit 7 '1' as suggested by the datasheet
* bit 6:5 '00' reserved
* bit 4 '1' recovery from sleep 1 usec
* bit 3 '0' battery monitor disabled
* bit 2:0 '000' reserved
*/
set_long_add_mem(MRF24J40_RFCON6, 0b10010000);
set_long_add_mem(MRF24J40_RFCON7, 0b10000000); /* Sleep clock = 100kHz */
set_long_add_mem(MRF24J40_RFCON8, 0b00000010); /* as suggested by the datasheet */
set_long_add_mem(MRF24J40_SLPCON1, 0b00100001); /* as suggested by the datasheet */
/* Program CCA, RSSI threshold values */
set_short_add_mem(MRF24J40_BBREG2, 0b01111000); /* Recommended value by the datashet */
set_short_add_mem(MRF24J40_CCAEDTH, 0b01100000); /* Recommended value by the datashet */
#ifdef MRF24J40MB
/* Activate the external amplifier needed by the MRF24J40MB */
set_long_add_mem(MRF24J40_TESTMODE, 0b0001111);
PRINTF("MRF24J40 Init Amplifier activated \n");
#endif
#ifdef ADD_RSSI_AND_LQI_TO_PACKET
/* Enable the packet RSSI */
set_short_add_mem(MRF24J40_BBREG6, 0b01000000);
PRINTF("MRF24J40 Init append RSSI and LQI to packet\n");
#endif
/*
* Wait until the radio state machine is not on rx mode
*/
do {
i = get_long_add_mem(MRF24J40_RFSTATE);
} while((i & 0xA0) != 0xA0);
i = 0;
#ifdef MRF24J40_DISABLE_AUTOMATIC_ACK
i = i | 0b00100000;
PRINTF("MRF24J40 Init NO_AUTO_ACK\n");
#endif
#ifdef MRF24J40_PAN_COORDINATOR
i = i | 0b00001000;
PRINTF("MRF24J40 Init PAN COORD\n");
set_short_add_mem(MRF24J40_ORDER, 0b11111111);
#endif
#ifdef MRF24J40_COORDINATOR
i = i | 0b00000100;
PRINTF("MRF24J40 Init COORD\n");
#endif
#ifdef MRF24J40_ACCEPT_WRONG_CRC_PKT
i = i | 0b00000010;
PRINTF("MRF24J40 Init Accept Wrong CRC\n");
#endif
#ifdef MRF24J40_PROMISCUOUS_MODE
i = i | 0b00000001;
PRINTF("MRF24J40 Init PROMISCUOUS MODE\n");
#endif
/*
* Set the RXMCR register.
* Default setting i = 0x00, which means:
* - Automatic ACK;
* - Device is not a PAN coordinator;
* - Device is not a coordinator;
* - Accept only packets with good CRC
* - Discard packet when there is a MAC address mismatch,
* illegal frame type, dPAN/sPAN or MAC short address mismatch.
*/
set_short_add_mem(MRF24J40_RXMCR, i);
PRINTF("RXMCR 0x%X\n", i);
/*
* Set the TXMCR register.
* bit 7 '0' Enable No Carrier Sense Multiple Access (CSMA) Algorithm.
* bit 6 '0' Disable Battery Life Extension Mode bit.
* bit 5 '0' Disable Slotted CSMA-CA Mode bit.
* bit 4:3 '11' MAC Minimum Backoff Exponent bits (macMinBE).
* bit 2:0 '100' CSMA Backoff bits (macMaxCSMABackoff)
*/
set_short_add_mem(MRF24J40_TXMCR, 0b00011100);
i = get_short_add_mem(MRF24J40_TXMCR);
PRINTF("TXMCR 0x%X\n", i);
/*
* Set TX turn around time as defined by IEEE802.15.4 standard
*/
set_short_add_mem(MRF24J40_TXSTBL, 0b10010101);
set_short_add_mem(MRF24J40_TXTIME, 0b00110000);
#ifdef INT_POLARITY_HIGH
/* Set interrupt edge polarity high */
set_long_add_mem(MRF24J40_SLPCON0, 0b00000011);
PRINTF("MRF24J40 Init INT Polarity High\n");
#else
set_long_add_mem(MRF24J40_SLPCON0, 0b00000001);
PRINTF("MRF24J40 Init INT Polarity Low\n");
#endif
PRINTF("MRF24J40 Inititialization completed\n");
mrf24j40_last_lqi = 0;
mrf24j40_last_rssi = 0;
status_tx = MRF24J40_TX_ERR_NONE;
pending = 0;
receive_on = 1;
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
reset_rf_state_machine();
/* Flush RX FIFO */
flush_rx_fifo();
process_start(&mrf24j40_process, NULL);
/*
*
* Setup interrupts.
*
* set INTCON
* bit 7 '1' Disables the sleep alert interrupt
* bit 6 '1' Disables the wake-up alert interrupt
* bit 5 '1' Disables the half symbol timer interrupt
* bit 4 '1' Disables the security key request interrupt
* bit 3 '0' Enables the RX FIFO reception interrupt
* bit 2 '1' Disables the TX GTS2 FIFO transmission interrupt
* bit 1 '1' Disables the TX GTS1 FIFO transmission interrupt
* bit 0 '0' Enables the TX Normal FIFO transmission interrupt
*/
set_short_add_mem(MRF24J40_INTCON, 0b11110110);
return 0;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_prepare(const void *data, unsigned short len)
{
PRINTF("PREPARE %u bytes\n", len);
uint8_t receive_was_on = receive_on;
mrf24j40_on();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
mrf24j40_set_txfifo(data, len);
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
if(!receive_was_on) {
mrf24j40_off();
} else {
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
}
return 0;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_transmit(unsigned short len)
{
PRINTF("TRANSMIT %u bytes\n", len);
uint8_t receive_was_on = receive_on;
mrf24j40_on();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
status_tx = MRF24J40_TX_WAIT;
set_short_add_mem(MRF24J40_TXNCON, 0b00000001);
/* Wait until the transmission has finished. */
while(status_tx == MRF24J40_TX_WAIT) {
;
}
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
if(!receive_was_on) {
mrf24j40_off();
} else {
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
}
switch(status_tx) {
case MRF24J40_TX_ERR_NONE:
return RADIO_TX_OK;
case MRF24J40_TX_ERR_COLLISION:
return RADIO_TX_COLLISION;
case MRF24J40_TX_ERR_MAXRETRY:
return RADIO_TX_NOACK;
default:
return RADIO_TX_ERR;
}
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_write(const void *data, uint16_t len)
{
int ret = -1;
PRINTF("PREPARE & TRANSMIT %u bytes\n", len);
if(mrf24j40_prepare(data, len))
return ret;
ret = mrf24j40_transmit(len);
return ret;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_read(void *data, uint16_t len)
{
return mrf24j40_get_rxfifo(data, len);
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_cca(void)
{
uint8_t ret;
uint8_t receive_was_on = receive_on;
mrf24j40_on();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
ret = mrf24j40_get_rssi() <= 95; /* -69dbm */
if(!receive_was_on) {
mrf24j40_off();
} else {
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
}
return ret;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_receiving_packet(void)
{
return 0;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_pending_packet(void)
{
return pending;
}
/*---------------------------------------------------------------------------*/
MRF24J40_ISR()
{
INT_status int_status;
TX_status tx_status;
ENERGEST_ON(ENERGEST_TYPE_IRQ);
int_status.val = get_short_add_mem(MRF24J40_INTSTAT);
if(!int_status.val) {
return;
}
if(int_status.bits.RXIF) {
pending = 1;
process_poll(&mrf24j40_process);
}
if(int_status.bits.TXNIF) {
tx_status.val = get_short_add_mem(MRF24J40_TXSTAT);
if(tx_status.bits.TXNSTAT) {
if(tx_status.bits.CCAFAIL) {
status_tx = MRF24J40_TX_ERR_COLLISION;
} else {
status_tx = MRF24J40_TX_ERR_MAXRETRY;
}
} else {
status_tx = MRF24J40_TX_ERR_NONE;
}
}
MRF24J40_INTERRUPT_FLAG_CLR();
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(mrf24j40_process, ev, data)
{
PROCESS_BEGIN();
uint8_t ret;
while(1) {
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
if(!pending) {
continue;
}
packetbuf_clear();
ret = mrf24j40_read(packetbuf_dataptr(), PACKETBUF_SIZE);
packetbuf_set_datalen(ret);
#ifdef ADD_RSSI_AND_LQI_TO_PACKET
packetbuf_set_attr(PACKETBUF_ATTR_RSSI, mrf24j40_last_rssi);
packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, mrf24j40_last_lqi);
#endif
NETSTACK_RDC.input();
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
const struct radio_driver mrf24j40_driver = {
mrf24j40_init,
mrf24j40_prepare,
mrf24j40_transmit,
mrf24j40_write,
mrf24j40_read,
mrf24j40_cca,
mrf24j40_receiving_packet,
mrf24j40_pending_packet,
mrf24j40_on,
mrf24j40_off
};
/*---------------------------------------------------------------------------*/
/** @} */

228
platform/seedeye/dev/mrf24j40/mrf24j40.h Normal file
View file

@ -0,0 +1,228 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \defgroup mrf24j40 MRF24J40 Driver
*
* @{
*/
/**
* \file mrf24j40.h
* \brief MRF24J40 Driver
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-21
*/
#ifndef __MRF24J40_H__
#define __MRF24J40_H__
#include <pic32_irq.h>
#include <pic32_spi.h>
extern const struct radio_driver mrf24j40_driver;
#define MRF24J40_DEFAULT_CHANNEL 11
#define MRF24J40_TX_ERR_NONE 0
#define MRF24J40_TX_ERR_NOTSPECIFIED 1
#define MRF24J40_TX_ERR_COLLISION 2
#define MRF24J40_TX_ERR_MAXRETRY 3
#define MRF24J40_TX_WAIT 4
/* Functions prototypes */
void mrf24j40_set_channel(uint16_t ch);
void mrf24j40_set_panid(uint16_t id);
void mrf24j40_set_short_mac_addr(uint16_t addr);
void mrf24j40_set_extended_mac_addr(uint64_t addr);
void mrf24j40_get_short_mac_addr(uint16_t * addr);
void mrf24j40_get_extended_mac_addr(uint64_t * addr);
void mrf24j40_set_tx_power(uint8_t pwr);
void mrf24j40_set_csma_par(uint8_t be, uint8_t nb);
uint8_t mrf24j40_get_status(void);
uint8_t mrf24j40_get_rssi(void);
uint8_t mrf24j40_get_last_rssi(void);
uint8_t mrf24j40_get_last_lqi(void);
int32_t mrf24j40_set_txfifo(const uint8_t * buf, uint8_t buf_len);
int32_t mrf24j40_get_rxfifo(uint8_t * buf, uint8_t buf_len);
/* Long address registers */
#define MRF24J40_RFCON0 (0x200)
#define MRF24J40_RFCON1 (0x201)
#define MRF24J40_RFCON2 (0x202)
#define MRF24J40_RFCON3 (0x203)
#define MRF24J40_RFCON5 (0x205)
#define MRF24J40_RFCON6 (0x206)
#define MRF24J40_RFCON7 (0x207)
#define MRF24J40_RFCON8 (0x208)
#define MRF24J40_SPCAL0 (0x209)
#define MRF24J40_SPCAL1 (0x20A)
#define MRF24J40_SPCAL2 (0x20B)
#define MRF24J40_RFSTATE (0x20F)
#define MRF24J40_RSSI (0x210)
#define MRF24J40_SLPCON0 (0x211)
#define MRF24J40_SLPCON1 (0x220)
#define MRF24J40_WAKETIMEL (0x222)
#define MRF24J40_WAKETIMEH (0x223)
#define MRF24J40_REMCNTL (0x224)
#define MRF24J40_REMCNTH (0x225)
#define MRF24J40_MAINCNT0 (0x226)
#define MRF24J40_MAINCNT1 (0x227)
#define MRF24J40_MAINCNT2 (0x228)
#define MRF24J40_MAINCNT3 (0x229)
#define MRF24J40_TESTMODE (0x22F)
#define MRF24J40_NORMAL_TX_FIFO (0x000)
#define MRF24J40_BEACON_TX_FIFO (0x080)
#define MRF24J40_GTS1_TX_FIFO (0x100)
#define MRF24J40_GTS2_TX_FIFO (0x180)
#define MRF24J40_RX_FIFO (0x300)
#define MRF24J40_SECURITY_FIFO (0x280)
#define MRF24J40_UPNONCE0 (0x240)
/* Short address registers */
#define MRF24J40_RXMCR (0x00)
#define MRF24J40_PANIDL (0x01)
#define MRF24J40_PANIDH (0x02)
#define MRF24J40_SADRL (0x03)
#define MRF24J40_SADRH (0x04)
#define MRF24J40_EADR0 (0x05)
#define MRF24J40_EADR1 (0x06)
#define MRF24J40_EADR2 (0x07)
#define MRF24J40_EADR3 (0x08)
#define MRF24J40_EADR4 (0x09)
#define MRF24J40_EADR5 (0x0A)
#define MRF24J40_EADR6 (0x0B)
#define MRF24J40_EADR7 (0x0C)
#define MRF24J40_RXFLUSH (0x0D)
#define MRF24J40_ORDER (0x10)
#define MRF24J40_TXMCR (0x11)
#define MRF24J40_ACKTMOUT (0x12)
#define MRF24J40_ESLOTG1 (0x13)
#define MRF24J40_SYMTICKL (0x14)
#define MRF24J40_SYMTICKH (0x15)
#define MRF24J40_PACON0 (0x16)
#define MRF24J40_PACON1 (0x17)
#define MRF24J40_PACON2 (0x18)
#define MRF24J40_TXBCON0 (0x1A)
#define MRF24J40_TXNCON (0x1B)
#define MRF24J40_TXG1CON (0x1C)
#define MRF24J40_TXG2CON (0x1D)
#define MRF24J40_ESLOTG23 (0x1E)
#define MRF24J40_ESLOTG45 (0x1F)
#define MRF24J40_ESLOTG87 (0x20)
#define MRF24J40_TXPEND (0x21)
#define MRF24J40_WAKECON (0x22)
#define MRF24J40_FRMOFFSET (0x23)
#define MRF24J40_TXSTAT (0x24)
#define MRF24J40_TXBCON1 (0x25)
#define MRF24J40_GATECLK (0x26)
#define MRF24J40_TXTIME (0x27)
#define MRF24J40_HSYMTMRL (0x28)
#define MRF24J40_HSYMTMRH (0x29)
#define MRF24J40_SOFTRST (0x2A)
#define MRF24J40_SECCON0 (0x2C)
#define MRF24J40_SECCON1 (0x2D)
#define MRF24J40_TXSTBL (0x2E)
#define MRF24J40_RXSR (0x30)
#define MRF24J40_INTSTAT (0x31)
#define MRF24J40_INTCON (0x32)
#define MRF24J40_GPIO (0x33)
#define MRF24J40_TRISGPIO (0x34)
#define MRF24J40_SLPACK (0x35)
#define MRF24J40_RFCTL (0x36)
#define MRF24J40_SECCR2 (0x37)
#define MRF24J40_BBREG0 (0x38)
#define MRF24J40_BBREG1 (0x39)
#define MRF24J40_BBREG2 (0x3A)
#define MRF24J40_BBREG3 (0x3B)
#define MRF24J40_BBREG4 (0x3C)
#define MRF24J40_BBREG6 (0x3E)
#define MRF24J40_CCAEDTH (0x3F)
/*
* TX power setting generation:
* tx_pwr_set(large_val, small_val) computes the value for the RFCON3 register.
* Examples:
* - if we want to set tx power to -11,2 dB then:
* mrf24j40_tx_pwr_set(#define MRF24J40_PWR_H_MINUS_10dB, #define MRF24J40_PWR_L_MINUS_1.2dB).
*/
#define MRF24J40_PWR_H_MINUS_30dB (0b11)
#define MRF24J40_PWR_H_MINUS_20dB (0b10)
#define MRF24J40_PWR_H_MINUS_10dB (0b01)
#define MRF24J40_PWR_H_0dB (0b00)
#define MRF24J40_PWR_L_MINUS_6_3dB (0b111)
#define MRF24J40_PWR_L_MINUS_4_9dB (0b110)
#define MRF24J40_PWR_L_MINUS_3_7dB (0b101)
#define MRF24J40_PWR_L_MINUS_2_8dB (0b100)
#define MRF24J40_PWR_L_MINUS_1_9dB (0b011)
#define MRF24J40_PWR_L_MINUS_1_2dB (0b010)
#define MRF24J40_PWR_L_MINUS_0_5dB (0b001)
#define MRF24J40_PWR_L_0dB (0b000)
#define MRF24J40_TX_PWR_SET(large_val, small_val) ((large_val << 6) | (small_val << 3))
typedef union _TX_status {
uint8_t val;
struct TX_bits {
uint8_t TXNSTAT:1;
uint8_t TXG1STAT:1;
uint8_t TXG2STAT:1;
uint8_t TXG1FNT:1;
uint8_t TXG2FNT:1;
uint8_t CCAFAIL:1;
uint8_t TXNRETRY:2;
} bits;
} TX_status;
typedef union _INT_status {
uint8_t val;
struct INT_bits {
uint8_t TXNIF:1;
uint8_t TXG1IF:1;
uint8_t TXG2IF:1;
uint8_t RXIF:1;
uint8_t SECIF:1;
uint8_t HSYMTMRIF:1;
uint8_t WAKEIF:1;
uint8_t SLPIF:1;
} bits;
} INT_status;
#endif /* __MRF24J40_H__ */
/** @} */

128
platform/seedeye/dev/mrf24j40/mrf24j40_arch.h Normal file
View file

@ -0,0 +1,128 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup mrf24j40 MRF24J40 Driver
*
* @{
*/
/**
* \file mrf24j40_arch.h
* \brief MRF24J40 Specific Arch Conf
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-21
*/
#ifndef __MRF24J40_ARCH_H__
#define __MRF24J40_ARCH_H__
#include "p32xxxx.h"
#include <stdint.h>
#include "dev/radio.h"
/* Pin Mapping */
#define MRF24J40_RESETn PORTGbits.RG15
#define MRF24J40_INT PORTAbits.RA15
#define MRF24J40_CSn PORTFbits.RF12
#define MRF24J40_WAKE PORTGbits.RG12
/* Pin Tri-States */
#define MRF24J40_TRIS_RESETn TRISGbits.TRISG1
#define MRF24J40_TRIS_INT TRISAbits.TRISA15
#define MRF24J40_TRIS_CSn TRISFbits.TRISF12
#define MRF24J40_TRIS_WAKE TRISGbits.TRISG12
/* RESET low/high */
#define MRF24J40_HARDRESET_LOW() MRF24J40_RESETn = 0
#define MRF24J40_HARDRESET_HIGH() MRF24J40_RESETn = 1
#define MRF24J40_CSn_LOW() MRF24J40_CSn = 0
#define MRF24J40_CSn_HIGH() MRF24J40_CSn = 1
/* Spi port Mapping */
#ifdef __USE_MRF24J40_SPI_PORT_1__
#define MRF24J40_SPI_PORT_INIT pic32_spi1_init
#define MRF24J40_SPI_PORT_WRITE pic32_spi1_write
#define MRF24J40_SPI_PORT_READ pic32_spi1_read
#elif defined __USE_MRF24J40_SPI_PORT_1A__
#define MRF24J40_SPI_PORT_INIT pic32_spi1A_init
#define MRF24J40_SPI_PORT_WRITE pic32_spi1A_write
#define MRF24J40_SPI_PORT_READ pic32_spi1A_read
#elif defined __USE_MRF24J40_SPI_PORT_2A__
#define MRF24J40_SPI_PORT_INIT pic32_spi2A_init
#define MRF24J40_SPI_PORT_WRITE pic32_spi2A_write
#define MRF24J40_SPI_PORT_READ pic32_spi2A_read
#elif defined __USE_MRF24J40_SPI_PORT_3A__
#define MRF24J40_SPI_PORT_INIT pic32_spi3A_init
#define MRF24J40_SPI_PORT_WRITE pic32_spi3A_write
#define MRF24J40_SPI_PORT_READ pic32_spi3A_read
#else
#define MRF24J40_SPI_PORT_INIT pic32_spi3A_init
#define MRF24J40_SPI_PORT_WRITE pic32_spi3A_write
#define MRF24J40_SPI_PORT_READ pic32_spi3A_read
#endif
/* IRC Configuration */
#define MRF24J40_ISR() ISR(_EXTERNAL_4_VECTOR)
#define MRF24J40_INTERRUPT_FLAG_SET() IFS0SET = _IFS0_INT4IF_MASK
#define MRF24J40_INTERRUPT_FLAG_CLR() IFS0CLR = _IFS0_INT4IF_MASK
#define MRF24J40_INTERRUPT_ENABLE_SET() IEC0SET = _IEC0_INT4IE_MASK
#define MRF24J40_INTERRUPT_ENABLE_CLR() IEC0CLR = _IEC0_INT4IE_MASK
#define MRF24J40_INTERRUPT_ENABLE_STAT() IEC0bits.INT4IE
#define MRF24J40_PINDIRECTION_INIT() \
do { \
MRF24J40_TRIS_RESETn = 0; \
MRF24J40_TRIS_INT = 1; \
MRF24J40_TRIS_CSn = 0; \
MRF24J40_TRIS_WAKE = 0; \
} while(0)
#define MRF24J40_INTERRUPT_INIT(p, s) \
do { \
MRF24J40_INTERRUPT_ENABLE_CLR(); \
MRF24J40_INTERRUPT_FLAG_CLR(); \
INTCONCLR = _INTCON_INT4EP_MASK; \
IPC4CLR = _IPC4_INT4IP_MASK | _IPC4_INT4IS_MASK; \
IPC4SET = (p << _IPC4_INT4IP_POSITION) | (s << _IPC4_INT4IS_POSITION); \
MRF24J40_INTERRUPT_ENABLE_SET(); \
} while(0)
#endif /* __MRF24J40_ARCH_H__ */
/** @} */

98
platform/seedeye/dev/radio-sensor.c Normal file
View file

@ -0,0 +1,98 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup SeedEye Contiki SEEDEYE Platform
*
* @{
*/
/**
* \file radio-sensor.c
* \brief RADIO Sensor
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-04-24
*/
#include "lib/sensors.h"
#include "dev/radio-sensor.h"
#include "mrf24j40.h"
const struct sensors_sensor radio_sensor;
static int active;
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
switch(type) {
case RADIO_SENSOR_LAST_PACKET:
return mrf24j40_get_last_lqi();
case RADIO_SENSOR_LAST_VALUE:
default:
return mrf24j40_get_last_rssi();
}
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int c)
{
if(type == SENSORS_ACTIVE) {
active = c;
return 1;
}
return 0;
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
switch(type) {
case SENSORS_ACTIVE:
case SENSORS_READY:
return active;
}
return 0;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(radio_sensor, RADIO_SENSOR, value, configure, status);
/*---------------------------------------------------------------------------*/
/** @} */

178
platform/seedeye/init-net.c Normal file
View file

@ -0,0 +1,178 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup SeedEye Contiki SEEDEYE Platform
*
* @{
*/
/**
* \file init-net.c
* \brief Network initialization for the SEEDEYE port.
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-25
*/
#include <contiki.h>
#include <contiki-net.h>
#include <net/netstack.h>
#include <net/queuebuf.h>
#include <net/mac/frame802154.h>
#include <lib/random.h>
#include <time.h>
#include <mrf24j40.h>
#define DEBUG 1
#if DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
void
init_net(uint8_t node_id)
{
uint16_t shortaddr;
uint64_t longaddr;
rimeaddr_t addr;
#if WITH_UIP6
uip_ds6_addr_t *lladdr;
uip_ipaddr_t ipaddr;
#endif
uint8_t i;
memset(&shortaddr, 0, sizeof(shortaddr));
memset(&longaddr, 0, sizeof(longaddr));
*((uint8_t *) & shortaddr) = node_id >> 8;
*((uint8_t *) & shortaddr + 1) = node_id;
*((uint8_t *) & longaddr) = node_id >> 8;
*((uint8_t *) & longaddr + 1) = node_id;
for(i = 2; i < sizeof(longaddr); ++i) {
((uint8_t *)&longaddr)[i] = random_rand();
}
PRINTF("SHORT MAC ADDRESS %02x:%02x\n",
*((uint8_t *) & shortaddr), *((uint8_t *) & shortaddr + 1));
PRINTF("EXTENDED MAC ADDRESS %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
*((uint8_t *) & longaddr),
*((uint8_t *) & longaddr + 1),
*((uint8_t *) & longaddr + 2),
*((uint8_t *) & longaddr + 3),
*((uint8_t *) & longaddr + 4),
*((uint8_t *) & longaddr + 5),
*((uint8_t *) & longaddr + 6),
*((uint8_t *) & longaddr + 7));
memset(&addr, 0, sizeof(rimeaddr_t));
for(i = 0; i < sizeof(addr.u8); ++i) {
addr.u8[i] = ((uint8_t *)&longaddr)[i];
}
rimeaddr_set_node_addr(&addr);
PRINTF("Rime started with address: ");
for(i = 0; i < sizeof(addr.u8) - 1; ++i) {
PRINTF("%d.", addr.u8[i]);
}
PRINTF("%d\n", addr.u8[i]);
queuebuf_init();
NETSTACK_RADIO.init();
mrf24j40_set_channel(RF_CHANNEL);
mrf24j40_set_panid(IEEE802154_PANID);
mrf24j40_set_short_mac_addr(shortaddr);
mrf24j40_set_extended_mac_addr(longaddr);
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
PRINTF("%s %s, channel check rate %d Hz, radio channel %u\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 :
NETSTACK_RDC.channel_check_interval()), RF_CHANNEL);
#if WITH_UIP6
#if RIMEADDR_CONF_SIZE == 2
memset(&uip_lladdr.addr, 0, sizeof(uip_lladdr.addr));
uip_lladdr.addr[3] = 0xff;
uip_lladdr.addr[4]= 0xfe;
memcpy(&uip_lladdr.addr[6], &shortaddr, sizeof(shortaddr));
#else
memcpy(&uip_lladdr.addr, &longaddr, sizeof(uip_lladdr.addr));
#endif
process_start(&tcpip_process, NULL);
lladdr = uip_ds6_get_link_local(-1);
PRINTF("Tentative link-local IPv6 address ");
for(i = 0; i < 7; ++i) {
PRINTF("%02x%02x:", lladdr->ipaddr.u8[i * 2], lladdr->ipaddr.u8[i * 2 + 1]);
}
PRINTF("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
if(!UIP_CONF_IPV6_RPL) {
uip_ip6addr(&ipaddr, 0x2001, 0x1418, 0x100, 0x823c, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
PRINTF("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
PRINTF("%02x%02x:", ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
PRINTF("%02x%02x\n", ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#endif
}
/*---------------------------------------------------------------------------*/
/** @} */

59
platform/seedeye/init-net.h Normal file
View file

@ -0,0 +1,59 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup SeedEye Contiki SEEDEYE Platform
*
* @{
*/
/**
* \file init-net.h
* \brief Network initialization for the SEEDEYE port.
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-25
*/
#ifndef __INIT_NET_H__
#define __INIT_NET_H__
#include <stdint.h>
void init_net(uint8_t );
#endif /* __INIT_NET_H__ */
/** @} */

64
platform/seedeye/platform-conf.h Normal file
View file

@ -0,0 +1,64 @@
/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \file platform-conf.h
* \brief Platform configuration file for the SEEDEYE port.
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-06-06
*/
#ifndef __PLATFORM_CONF_H__
#define __PLATFORM_CONF_H__
#ifndef SEEDEYE_ID
#define SEEDEYE_ID 1
#endif /* SEEDEYE_ID */
#if SEEDEYE_ID == 1
#define MRF24J40_PAN_COORDINATOR
#endif /* SEEDEYE_ID == 1 */
#define UART_DEBUG_BAUDRATE 230400
#define UART_SLIP_BAUDRATE 230400
#define PLATFORM_HAS_BATTERY 1
#define PLATFORM_HAS_BUTTON 1
#define PLATFORM_HAS_LEDS 1
#define PLATFORM_HAS_RADIO 1
#define CLOCK_CONF_SECOND 1024
#endif /* __PLATFORM_CONF_H__ */