David Kopf
bdec65b889
Fix typos and file endings
2011-08-28 16:04:36 -04:00
David Kopf
9fec648b3e
Allow selection of slip port
2011-08-25 14:43:18 -04:00
David Kopf
dff77aea61
Correct typo
2011-08-25 14:37:12 -04:00
David Kopf
94fc40f736
Move LEDONPORTE1 define to contiki-conf.h, fixing typo.
2011-08-24 11:35:58 -04:00
David Kopf
3c18372939
Add periodic prints and stack monitor
2011-08-24 10:55:58 -04:00
David Kopf
b55dddcd38
Free rtimer for contikimac, add print-stats option
2011-08-15 14:55:18 -04:00
David Kopf
83e3b99d54
Let RPL examples enable platform RPL
2011-08-15 14:45:44 -04:00
David Kopf
50d1086553
Add changes needed for contikimac
2011-08-13 11:38:38 -04:00
David Kopf
ea1345d3fe
Update to proper webserver define
2011-08-13 11:36:43 -04:00
David Kopf
f36c97a9a4
Get random seed from noisy ADC conversion at startup.
2011-08-13 11:31:20 -04:00
Adam Dunkels
40bf585af8
The Z1 platform has LEDs
2011-08-08 22:46:30 +02:00
David Kopf
c9b19ce655
Change timer setups for arbitrary CLOCK_CONF_SECOND
...
Change raven to 128 ticks and enable 32KHz crystal as default.
2011-08-05 15:14:35 -04:00
David Kopf
96c3c1093a
Assign aaaa:: prefix if HARD_CODED_ADDRESS not defined
2011-08-03 12:30:20 -04:00
David Kopf
6ae3e2bcb2
Restore micaz/dev/clock.c, mysteriously renamed to iris/dev/sensors/battery-sensor.c
2011-08-03 11:44:22 -04:00
David Kopf
e2ad2acde4
Add stk500 platform and changes suggested by Daniel Willmann
2011-08-03 11:18:55 -04:00
David Kopf
44f4ee9315
Use PROCESS_NAME_STRING macro to handle NO_PROCESS_NAMES
2011-08-03 11:08:40 -04:00
David Kopf
6ec85fe079
Add Iris port of Shinta Hatatani
2011-08-03 10:17:59 -04:00
Adam Dunkels
8962136b1a
Added a motelist target that is the same on both sky and z1
2011-07-29 13:06:00 +02:00
Adam Dunkels
aedf4fe8b5
Made ContikiMAC/8 default on z1 platform; enabled power profiling by default
2011-07-29 13:05:36 +02:00
David Kopf
0774fef827
Add explicit RADIOSTATS to platform contiki-conf.h
2011-07-25 15:12:12 -04:00
David Kopf
05c11d362b
Clock seconds since startup on minimal-net
2011-07-24 11:53:36 -04:00
David Kopf
0bb585fd60
Replace WEBSERVER by AVR_WEBSERVER
2011-07-24 11:43:17 -04:00
HATATANI Shinta
11d6bc78c5
some fix
2011-07-19 16:21:41 +09:00
Mariano Alvira
697af5ef08
adding tmp102 sensor for the econotag from Hedde Bosman.
...
This can be pulling in as a common driver if we can make a generic i2c
Contiki driver.
2011-07-18 07:30:49 -04:00
HATATANI Shinta
3c168cc395
merge iris and micaz
2011-07-17 10:36:35 +09:00
HATATANI Shinta
94a6f4087c
some trivial change
2011-07-15 16:36:25 +09:00
HATATANI Shinta
a7d713d253
Now iris port works with tunslip6 (Thanks to Suhas K)
2011-07-15 16:36:25 +09:00
HATATANI Shinta
f4740a062a
IRIS port is working with uIPv6
2011-07-15 16:36:25 +09:00
HATATANI Shinta
9a201f6934
create iris directory
2011-07-15 16:36:24 +09:00
David Kopf
6355545ded
Add template for AUTOSTART_PROCESS
2011-07-11 11:34:04 -04:00
Vincent Brillault
dc9cbe647d
Changes in RPL implementation :
...
- Structural modification of RPL data storage.
- Support multiple gateways (multiple DODAG-ID with a unique InstanceID)
- Use Lollipop counters
- Add leaf-only configuration option for RPL
Bugfix :
- Correctly send "Grounded" flag in DIO
2011-07-11 16:52:45 +02:00
Mariano Alvira
e80f9eb4b5
mc1322x: build fixes for uart2
2011-07-08 19:40:42 -04:00
Niclas Finne
4b26f92e04
Added platform configuration files with resource definitions for the JCreate and Sentilla USB platforms
2011-07-01 17:18:57 +02:00
Niclas Finne
1d07330ac0
Made the platform config file configurable.
2011-07-01 17:16:12 +02:00
Niclas Finne
d635c03b52
Fixed bug when reading temperature (abstemp was not always set).
2011-06-30 18:16:35 +02:00
David Kopf
6ea7250af7
Change ctimer startup order, add multihop to wpcap and minimal-net platform.
2011-06-30 12:12:07 -04:00
David Kopf
46de21e771
Allow ipv6 builds on win32 platform. (webserver6 builds with cygwin, needs changes for VC++ compiler)
2011-06-28 08:24:23 -04:00
David Kopf
c48b7ab78d
Add RPL nodes and border router to minimal-net platform (cygwin only)
2011-06-28 08:19:48 -04:00
dak664
d6db9e4e86
Add project-conf.h to platform contiki-conf.h files.
...
Fix jackdaw comments.
2011-06-08 09:12:57 -04:00
Niclas Finne
dc426d789b
msp430.h has been merged with msp430def.h for code to compile with IAR compiler
2011-06-07 18:54:57 +02:00
Joakim Eriksson
af601dfb23
improved support for IAR compiler for z1
2011-06-05 00:21:47 +02:00
Mariano Alvira
cb29a9c667
add leds and button capabilities to the econotag.
2011-05-27 11:01:54 -04:00
Joakim Eriksson
77ec0bfa0f
fixed the z1 platform and generic code used by z1 to work with IAR compiler
2011-05-25 17:21:51 +02:00
Niclas Finne
374722b2e0
Added resource definition for leds and button
2011-05-20 14:27:53 +02:00
dak664
55c1ce6e93
Fix ip4 hello-world build
2011-05-18 11:09:16 -04:00
Niclas Finne
41dd2d09f4
Added missing include
2011-05-10 15:28:30 +02:00
Mariano Alvira
e2d9082fc7
factor maca hw autoack and nullrdc hw autoack config
2011-05-08 09:50:57 -04:00
Mariano Alvira
65671c66c6
turn on insert ack packet by default
2011-05-08 09:50:57 -04:00
Salvatore Pitrulli
6e20a4c0ce
Added missing include.
2011-04-27 18:12:23 +02:00
Salvatore Pitrulli
5eabf33211
Added functions for deep sleep to mbxxx platform.
2011-04-27 18:12:23 +02:00
Salvatore Pitrulli
01a7a78a94
Fixed temperature ADC conversion bug on mbxxx.
...
The conversion was made from an incorrect source when
the GPIO pin was not PB7.
Added functions and macros used to select the correct
ADC channel.
2011-04-20 18:06:20 +02:00
Salvatore Pitrulli
aa968309af
Merge remote branch 'sf/master'
2011-04-16 16:27:10 +02:00
Salvatore Pitrulli
738c5dcd4b
Files for platform mbxxx.
...
MBXXX is a fake platform that actually include
all the platforms based on STM32W108 microcontroller.
Detection of the board is made at runtime, at the
expense of code size.
2011-04-14 08:11:54 +02:00
Salvatore Pitrulli
80605d4045
Change from DEV to PORT in login command for mb851.
...
DEV variable was already used in Makefile.include.
2011-04-14 08:07:15 +02:00
Salvatore Pitrulli
af8e58e063
Set LED pins to output when MB851 is in sleep mode.
...
This reduces power consumption.
2011-04-13 18:14:12 +02:00
Oliver Schmidt
b19fb0ac9e
Activate Telnet-server GUI-support only for project builds.
2011-04-10 17:08:50 +02:00
Oliver Schmidt
c6c0d6247b
Merge remote-tracking branch 'origin/master'
2011-04-10 13:23:13 +02:00
Oliver Schmidt
7c3adef1c8
Added dependency handling and README.VC
2011-04-10 13:21:39 +02:00
Oliver Schmidt
f2678ff7b4
Renamed README to README.1X
2011-04-10 12:43:24 +02:00
Oliver Schmidt
199d51275d
Removed section about (recently deleted) VC solution file.
2011-04-10 12:38:11 +02:00
dak664
2e14df3981
Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6.
2011-04-08 15:15:16 -04:00
Salvatore Pitrulli
6655c876f2
Added functions and example for deep sleep on mb851.
...
The added function let a process to make the system go
into deep sleep for maximum power saving.
The udp-ipv6-example shows how to use these new functions.
2011-04-08 11:53:48 +00:00
Niclas Finne
236c459ecf
Added missing include
2011-04-07 09:26:12 +02:00
Oliver Schmidt
eadd74ae5f
Removed VC++ project files.
...
Being able to build about any Contiki project in the WIN32 target using VC++ is _so_ much more useful than those project files not integrated in any way into the Contiki build system.
2011-04-03 22:37:03 +02:00
Oliver Schmidt
5da4faf71e
Allow VC++ to be used as alternative to GCC for building in the WIN32 target.
...
TODOs:
- Update README
- Add dependency handling
- Add rtimersupport
2011-04-03 22:32:11 +02:00
Oliver Schmidt
f83fb3704b
Replaced make-empty-symbols with empty-symbols.[c|h]
...
The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.
2011-04-03 13:24:58 +02:00
Oliver Schmidt
4a731dfda9
Allow for non-GUI win32 apps.
2011-04-03 10:56:18 +02:00
dak664
4e8b4e408c
Temporary fix for RNDIS enumeration before the mac address is set up.
...
(Turn on RS232 debug to bypass the enumeration wait and let the mac address get set first)
2011-03-27 14:21:47 -04:00
Enric M. Calvo
4ba4d55e34
cleaned up main
2011-03-26 10:15:49 +01:00
Enric M. Calvo
aba380b960
removed modif. to sky files
2011-03-25 17:57:17 +01:00
Enric M. Calvo
1716d837fc
Merge branch 'master' of git://contiki.git.sourceforge.net/gitroot/contiki/contiki into master_cleanup
...
Makefile.z1 is broken into .common and .z1 to share it with Z1 Starter Platform
Conflicts:
.gitignore
platform/z1/Makefile.z1
2011-03-25 17:46:38 +01:00
dak664
fcb41fa5c2
Refactor with settings manager and better usb enumeration for debug prints
2011-03-23 18:10:49 -04:00
dak664
a9cbbb4570
Add sneezer mode and tx power change
2011-03-23 18:08:07 -04:00
Mariano Alvira
0af24040f1
econotag: add an option to use the watchdog timer
2011-03-22 16:35:54 -04:00
Salvatore Pitrulli
45db1a6faf
Reduced uip buffer size in order to compile all the examples.
2011-03-22 19:35:50 +01:00
Salvatore Pitrulli
eb588f1aec
New HAL and SimpleMAC for STM32W108.
2011-03-22 19:35:49 +01:00
Niclas Finne
ccc1687319
Made energest configuration configurable
2011-03-21 21:28:43 +01:00
dak664
5dd7500d0b
Add configurable auto cca threshold and implement driver cca call.
...
Show smallest rssi in jackdaw menu.
2011-03-21 11:10:30 -04:00
joakime
7984ec38ce
fixed so that accelerometer is initialized and the isr vector is included
2011-03-16 13:56:29 +01:00
Mariano Alvira
59768e7bc7
econotag: fix problem with how IAB based mac addresses are formed
2011-03-13 17:48:47 -04:00
dak664
16a73eafd9
Use uip-debug.h defines and print routines
...
Add print to show cause of startup
2011-03-13 14:07:17 -04:00
dak664
533a827adb
Defines need to be above their use in a conditional test
2011-03-11 16:28:02 -05:00
dak664
abf6f1a153
Include objects needed for slip rpl border router build
2011-03-11 15:08:55 -05:00
dak664
e4fcd7ebd7
Add files needed for slip rpl-border-router build.
2011-03-11 14:16:27 -05:00
dak664
02091b083a
MAC address to EEMEM, not PROGMEM
...
Sync atmega128rfa1 main routine to the raven (timed route prints, etc.)
2011-03-11 13:47:47 -05:00
dak664
69da4c8cfa
Fix unresolved references when built without webserver and/or tcp. Changes suggested by Harald Pichler.
2011-03-10 10:57:43 -05:00
dak664
ad67c573de
Fix unused variable warning
2011-03-10 10:37:15 -05:00
dak664
de7bcda99f
avrdude and makefile changes suggested by Georg von Zengen
2011-03-08 13:07:00 -05:00
Enric M. Calvo
127a3d03ad
Added IPv6 z1-websense demo w/MSP batt&temp sensor
2011-03-08 09:27:38 +01:00
Enric M. Calvo
13ff778d73
added temperature-sensor to Makefile.common
2011-03-08 09:20:35 +01:00
Enric M. Calvo
7fc41e1706
M Makefile.common to add tmp102 sensor by default
2011-03-07 21:23:58 +01:00
Niclas Finne
a199ae920e
Changed the order in which io.h and signal.h is included. Some versions of mspgcc4 seem to have a problem when signal.h is included before io.h.
2011-03-07 20:54:02 +01:00
Niclas Finne
ccc0a3f7c4
Changed LEDS_ALL to 8 leds for the JCreate platform
2011-03-07 20:12:26 +01:00
Fredrik Osterlind
dd7cec737d
removed obsolete leds_[color]() functions, replaced by leds_{on,off}()
...
allow LEDS_[COLOR] to be configured by platform-conf
2011-03-03 17:48:32 +01:00
Enric M. Calvo
0c6fd04f44
Modified contiki-conf.h and added sensys-scanner.
2011-03-03 13:44:28 +01:00
Fredrik Osterlind
499c13a357
removed execute flag of source files (avoids diff problems with egit)
2011-03-01 18:16:42 +01:00
dak664
7f3c198a78
Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki
2011-02-28 16:32:48 -05:00
dak664
1e7479f8e4
Add periodic print of stack monitor and neighbors/routes.
...
Refactor PRINTFs.
2011-02-28 16:26:28 -05:00
Enric M. Calvo
701a42e239
Added dummy light driver. Now skywebsense likes Z1
...
The light sensor driver is mapped to the same pin as the potentiometer
in Z1 Starter Platform. sky-websense is untouched, though.
2011-02-27 21:28:25 +01:00
Enric M. Calvo
414d926966
Sky-websense compiles for Z1 (testing)
2011-02-27 20:10:09 +01:00
Enric M. Calvo
02d097674c
Corrected contiki-conf.h to include project-conf.h
2011-02-27 20:00:45 +01:00
Enric M. Calvo
a779cb4d0d
XXX Interrupts by cc2420 & adxl345 compatible now
...
Still remains to be seen why i2cmaster.c and adxl345.c need to be added
in the Makefile.common at the very beginnig with the env. var.
PROJECT_SOURCEFILES += i2cmaster.c adxl345.c
2011-02-27 18:02:12 +01:00
Enric M. Calvo
18e1f92f0e
Set QUEUEBUF_CONF_NUM to 4 to avoid .data overflow
2011-02-27 17:52:00 +01:00
Enric M. Calvo
fc51115ace
optional lines in Makefile.common
2011-02-27 17:14:27 +01:00
Enric M. Calvo
e0882d7769
corrected adxl345, ISR was not disabled, now it is.
2011-02-27 13:09:14 +01:00
Enric M. Calvo
404b735cc4
Fixed radio and contiki conf to get RIME working
...
cc2420 isr handled at cc2420-arch, disabled accel. interrupts and modified
platform/z1/contiki-conf.h to use same mac as sky.
Added example-broadcast-button, sends packets every second or when button pushed.
Works with other Z1s and Sky
2011-02-27 12:35:19 +01:00
Enric M. Calvo
9acdb98a56
Added a quick sht11 sensor driver support for Z1
...
Support for Sensirion SHT1x/SHT7x support is adapted from core for Z1 in the Ziglet port.
XXX TODO:
+ Remove SHT11_PWR
+ Lines are shared with I2C, hence port reconfiguration must be added at the driver level.
2011-02-26 12:41:56 +01:00
Enric M. Calvo
f1fe8782b0
Removed unwanted files
2011-02-25 16:29:55 +01:00
Enric M. Calvo
44ce1699f2
Definition of Z1 Starter Platform in contiki/platforms + LEDs + Potentiometer
2011-02-25 16:08:50 +01:00
Enric M. Calvo
3ec4143252
Added Potentiometer sensor in Z1 Platform
2011-02-25 16:01:40 +01:00
Enric M. Calvo
43db4fd10e
Added MAC overwriting/burning capability to the Z1
...
Added compilation parameter "nodemac=1234" that can be used
to overwrite the MAC at compilation time, and that combined
with the burn-nodeid app can record a prestablished MAC on ext. mem.
2011-02-25 15:35:41 +01:00
Enric M. Calvo
659f36eb79
Updated *-sensor.c files from the sky platform.
...
Fixed battery-sensor plus added simple test (XXX)
2011-02-25 15:35:41 +01:00
Mariano Alvira
05a4961604
econotag: generate EUI64 mac adresses properly
2011-02-23 15:20:08 -08:00
Mariano Alvira
e9c904a74c
econotag: turn DEBUG off by default
2011-02-23 15:19:44 -08:00
Mariano Alvira
c2c70a22df
mc1322x: setup hardware addresses and enable AUTOACK mode if
...
configured
2011-02-23 15:19:44 -08:00
Mariano Alvira
e826ccd3b9
add NULLRDC_CONF_802154_AUTOACK_HW for radios that only pass-up NOACK
...
status but not the actual ack packet.
2011-02-23 15:19:44 -08:00
dak664
ef4bb08c3e
Add stack monitor. Change internal uip address to 200 for RPL.
2011-02-23 14:14:21 -05:00
Lionel Debroux
5cb49e8b07
Several compiler warning fixes:
...
* msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h;
* sky: fix a couple pointer target signedness warnings;
* core: fix several signed/unsigned comparison warnings;
* framer-802154: "const static" -> "static const" to fix compiler warnings;
* core: comment or remove unused variables and function definitions.
Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Mariano Alvira <mar@devl.org>
2011-02-20 19:28:14 -05:00
Enric M. Calvo
1b2878baa4
Corrected some typos in the PORT1 ISR function.
2011-02-16 12:02:36 -05:00
Fredrik Osterlind
747eafd5f0
support for tinyos style node ids, to simplify testbed experiments
...
with automatic node ids
2011-02-11 15:27:14 +01:00
Fredrik Osterlind
a501816472
example of adding cooja-platform mote interface manually
2011-02-11 15:23:59 +01:00
Nicolas Tsiftes
39ea9405bb
Added a function for setting the I/O semantics on a Coffee file descriptor. Changed the configuration parameters slightly and updated the platform definitions to reflect this change.
2011-02-09 15:03:57 +01:00
Mariano Alvira
ad200384ac
add a dummy light sensor for econotag
2011-02-08 09:07:45 -05:00
Mariano Alvira
227b72c88d
add dummy node-id.h for econotag
2011-02-08 09:07:34 -05:00
Mariano Alvira
9572baa71b
fix mc13224v led driver to only touch gpio used for leds.
2011-02-08 09:07:11 -05:00
Mariano Alvira
dbe6407a22
change mc13224v button-sensor to use gpio structs
2011-02-08 09:07:03 -05:00
dak664
bbcd43a9aa
Merge branch 'master' of github.com:adamdunkels/contiki-2.x
2011-02-07 15:14:54 -05:00
dak664
71612fd6a4
Replace file, some problem with my local master line endings.
2011-02-07 15:12:54 -05:00
dak664
b33b89216f
Delete obsolete file
2011-02-07 14:35:19 -05:00
dak664
574feaa866
Test web-based commit, see if it fixes the line endings.
2011-02-07 11:25:07 -08:00
dak664
574927c776
Delete obsolete file
2011-02-07 14:07:37 -05:00
dak664
519cce0019
Add comments, bugfixes, merge avr-atmega128rfa1 platform changes to avr-raven
2011-02-07 14:06:53 -05:00
dak664
62b894e560
Add avr-atmega128rfa1 platform based on Michael Hartman's board (single LED peripheral)
2011-02-07 13:15:21 -05:00
David Kopf
ceea35f7a8
Test TortoiseGit commit from Vista laptop
2011-02-04 10:41:18 -05:00
David Kopf
16df31b143
Merge branch 'master' of https://github.com/adamdunkels/contiki-2.x
2011-02-04 10:39:34 -05:00
dak664
0b23116c30
Test TortoiseGit commit from windows 7
2011-02-04 09:03:03 -05:00
David Kopf
c18d12e8a4
Test git commit
2011-02-03 18:29:17 -05:00
oliverschmidt
10a7bb2579
Made Atari build compabile with make.exe from GnuWin32 and cmd.exe. cmd.exe comes with a builtin mkdir which doesn't understand -p. However -p isn't necessary as long as the disk creation works - and therefore the directory is successfully deleted.
2011-01-23 16:25:45 +00:00
nvt-se
375e1d76ef
Print the error if select fails
2011-01-21 14:19:57 +00:00
enricmcalvo
594d033c04
Added device drivers for tmp102 sensor for the Zolertia Z1 platform.
2011-01-20 10:28:00 +00:00
nifi
3d28da8813
Coffee no longer uses watchdog calls
2011-01-18 15:49:37 +00:00
nifi
1e69c4c795
Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up
2011-01-18 15:48:38 +00:00
nvt-se
9ad02dbdd8
Removed header inclusion
2011-01-18 14:58:39 +00:00
nvt-se
28421f1fe2
Removed watchdog calls from Coffee
2011-01-18 14:06:33 +00:00
nvt-se
00ac8cfaa0
Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up
2011-01-18 14:03:55 +00:00
adamdunkels
34f2d3e025
Disable timesynch by default - it is not well-tested enough yet.
2011-01-09 21:04:14 +00:00
adamdunkels
a6fe42f60f
Restart CC2420 SFD interrupt after DCO calibration only if it is enabled.
2011-01-09 21:03:42 +00:00
nvt-se
4003c3a8c9
do2unix conversion
2011-01-05 17:02:15 +00:00
joxe
2e1c856741
added support for avoiding sleeping in LPM3 when DCO needs to be running - needed for uart DMA
2011-01-05 12:04:23 +00:00
dak664
90a6d768ea
Keep track of sleeptime and display on status web page.
2010-12-23 19:41:07 +00:00
dak664
013c3ac2f8
Remove contitional on clock updating, it should always be done after a sleep!
2010-12-22 17:09:03 +00:00
dak664
44a2e34005
Resolve TIMER2 conflict between sleep and possible clock usage.
2010-12-22 16:50:30 +00:00
dak664
7b7ad4336e
Send text following ? in GET to Raven LCD
2010-12-20 20:06:06 +00:00
dak664
ac68ced90a
Add polyphonic ringtones for received messages.
2010-12-20 20:03:56 +00:00
dak664
8af150ec0b
Send temperature and voltage to 1294p webserver on startup by default.
2010-12-20 19:58:42 +00:00
dak664
b87694e272
Update documentation
2010-12-19 17:13:29 +00:00
dak664
6d1c060564
Modify menu chart for sleep and doze, add raven picture for doxygen
2010-12-19 17:12:13 +00:00
dak664
b438b78097
Fix configuration for RPL build (no packet queuing, default no TCP)
2010-12-18 22:37:02 +00:00
dak664
9575daede2
Add working cx-max configuration values.
2010-12-18 20:53:36 +00:00
dak664
d378d891c8
Add working cx-mac configuration values.
2010-12-18 20:46:14 +00:00
dak664
89d0ffffd2
Save radio ontime when webwser displays current cpu ontime for later display of corresponding value after possible TCP delays.
2010-12-18 20:44:02 +00:00
dak664
8586643d14
Implement SLEEP and DOZE commands from the 3290p menu.
...
Define serial commands the same as the 3290p for grepping.
2010-12-18 20:40:45 +00:00
dak664
555fab59a3
Add SLEEP and DOZE functions to the menu.
...
Give serial commands the same defines as in the 1284p for grepping.
2010-12-18 20:35:58 +00:00
adamdunkels
e55c3cd471
Enable DCO configuration override
2010-12-16 22:52:27 +00:00
adamdunkels
37e65264a8
Hack: reenable cc2420 SFD interrupts after resyncing the DCO. The DCO code currently messes up the SFD interrupt settings.
2010-12-16 22:52:12 +00:00
adamdunkels
6a80106236
Turn on timesynch by default
2010-12-16 22:51:22 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
nvt-se
404230a047
Added a macro for portable watchdog calls.
2010-12-15 14:01:07 +00:00
salvopitru
5f40a5d63e
Added serialdump utility from sky folder to stm32w folder. It has one more option for limiting upload speed.
2010-12-15 11:18:09 +00:00
dak664
ced88c2eff
Give jackdaw fe80::0 address and number webservers from fe80::1
2010-12-14 23:22:01 +00:00
dak664
1d2a5ca671
Minor format and comment changes
2010-12-14 22:51:04 +00:00
dak664
d8fe44645c
Refactor, tune, add SICSLOWPAN_CONF_ACK_ALL defines for testing radio acks
2010-12-14 22:39:38 +00:00
dak664
a9dedfee4f
Refactor contiki-conf files, remove obsolete defines.
2010-12-13 23:31:13 +00:00
dak664
e06dada659
Update platform build for hello-world, includes patch from Tobias Schfer
2010-12-05 20:21:19 +00:00
dak664
8e38f5ee34
Fix comment, add WEBDIR=default to force rebuild with default web content
2010-12-05 17:32:50 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
kasunch
753cd22d56
Changing line ending to LF
2010-12-04 08:22:10 +00:00
dak664
1ca7f7f940
Apply patch from Tobias Schfer to enable hello-world build. Untested otherwise.
2010-12-03 21:39:33 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
09c45f0497
Add address, neighbor, routes cgi's
2010-12-02 15:37:13 +00:00
dak664
6f66d45917
Add status web page with addresses, neighbors, routes
2010-12-02 15:28:38 +00:00
dak664
30885ba4ce
Do clock init before any RS232 output
2010-12-01 16:30:34 +00:00
dak664
3d3ad9e2c2
Fixes to allow ipv4 (hello world) builds
2010-12-01 16:23:55 +00:00
dak664
c027c1664a
Informative error when bogus platform is used in a contiki build
2010-12-01 15:09:06 +00:00
zhitao
af7b81efdb
resolved conflict with type declaration
2010-12-01 10:19:58 +00:00
dak664
5a4fa388da
Refuse to play ping-pong with host interface
2010-11-29 21:22:41 +00:00
dak664
0735b431aa
Enable RPL neighbor webserver page
2010-11-29 21:21:36 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
adamdunkels
353bb07cc9
Changed the RDC rate configuration name to the new configuration name
2010-11-26 12:09:04 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
nifi
3bd78893e5
Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc.
...
nullrdc (previously nullrdc-framer) is now a RDC implementation that
does not do any radio duty cycling but supports link layer addresses
and frame format via framer (for example 802.15.4). nullrdc can now be
used in the same way as contikimac, xmac, etc.
nullrdc-noframer (previously nullrdc) is a null RDC implementation
that does not do any radio duty cycling, does not add any header of its
own to the packets, and does not support link layer addresses.
2010-11-23 18:11:00 +00:00
dak664
da8ad17c02
Save 256 bytes of RAM by excluding floating point routine
2010-11-21 17:56:36 +00:00
dak664
b3324c6d23
Add menu option to temporarily disable RS232 debug output for higher 6lowpan throughput.
...
Functional rpl with RNDIS/Ubuntu (tested on Raven single hops)
2010-11-19 20:02:25 +00:00
dak664
c6c81acede
Add optional pings to google and cisco
2010-11-19 19:44:10 +00:00
dak664
fe19719a16
Fix printf_P error
2010-11-18 14:33:10 +00:00
adamdunkels
9446d37285
Increased the default Cooja CFS size to 4000 bytes so that examples work (found by Roger Larsson)
2010-11-15 21:44:37 +00:00
enricmcalvo
f4c1953563
Added temporary definition of P1SEL2 for those mspgcc4 without complete port register definitions.
2010-11-14 21:59:02 +00:00
dak664
cc7fea92d2
Force ipv6 when building with fakeuip
2010-11-13 16:28:46 +00:00
dak664
72d49c20af
Allow non-ipv6 build (hello world)
2010-11-12 20:49:03 +00:00
dak664
9e94ba9803
Allow non-ipv6 build, e.g. Hello World
2010-11-12 17:15:00 +00:00
fros4943
0a8d898678
#ifndef'd elfloader's default memory usage
2010-11-11 13:56:02 +00:00
enricmcalvo
436e4dce1c
Updated accelerometer drivers to avoid conflicts with radio transceiver.
2010-11-10 13:46:39 +00:00
fros4943
3563089a91
reimplemented initial support for referencing contiki source files in cooja projects
2010-11-10 13:11:43 +00:00
maralvira
5b4c63440b
fix typos
2010-11-09 01:30:38 +00:00
oliverschmidt
7432afa036
Both apps/webbrowser and apps/webserver contain a http-strings.c so the object files generated overwrite each other. However, currently webserver/http-strings.c is a clean superset of webbrowser/http-strings.c so using only that one even in the www.prg project makes things (sort of) work.
2010-11-07 23:36:34 +00:00
maralvira
24b6071234
change maca_raw_mode to contiki_maca_raw_mode
2010-11-07 18:39:39 +00:00
maralvira
3747f9a7c5
use the nullmac and nullrdc with framer layer.
2010-11-07 18:36:52 +00:00
maralvira
e029fa8da0
fix defines for raw mode
2010-11-07 18:34:52 +00:00
maralvira
8cd50c90ba
initial commit for the redbee-dev platform
2010-11-07 13:56:17 +00:00
maralvira
26725e7c19
use sicslowmac_driver instead of contikimac_driver --- since contikimac
...
power saving doesn't seem to be working.
2010-11-07 13:46:03 +00:00
enricmcalvo
01f886dad9
Slight modification to clean properly
2010-11-07 08:40:24 +00:00
enricmcalvo
59bdebe842
Added I2C Master drivers and accelerometer drivers
2010-11-07 08:38:51 +00:00
dak664
acd9d516d8
Add RPL neighbors and routes printout to Jackdaw menu
2010-11-05 20:35:15 +00:00
joxe
f08e262055
fixed buggy config of phidget sensors for Z1
2010-11-05 10:31:57 +00:00
dak664
abf4791db4
Add Raven RPL build option
2010-11-03 16:51:55 +00:00
adamdunkels
896f627290
Made uIPv6 packet queueuing configuration configurable
2010-11-02 11:06:01 +00:00
oliverschmidt
0d1db1a78b
Since a few days the cc65 trunk contains a POSIX dirent implementation for the Atari. Until a new cc65 release is available - and Contiki has switched to that release - I'll borrow the implementation from the cc65 trunk.
2010-11-01 19:44:34 +00:00
dak664
9194b3ac69
Fix error when RS232 not enabled
2010-10-28 19:31:28 +00:00
dak664
ad6712736b
Fix Windows XP RNDIS+CDC serial port enumeration
2010-10-28 19:30:14 +00:00
oliverschmidt
0ef1171705
Just always call process_run() and etimer_request_poll() in turn - like the "major" platforms do.
2010-10-27 22:17:39 +00:00
dak664
258e3cc93a
Allow simultaneous use of RS232 and USB serial ports
2010-10-27 14:51:20 +00:00
salvopitru
d8711d32a3
Added configuration in order to run Rime.
2010-10-27 14:05:23 +00:00
oliverschmidt
46122f558f
Skip the CBM volume header.
2010-10-26 18:56:39 +00:00
joxe
dfff488a3d
configured tmote sky to use 5 retransmissions
2010-10-26 13:26:16 +00:00
salvopitru
ec5e3ce0d7
New Contiki port to STM32W108.
2010-10-25 09:03:38 +00:00
adamdunkels
726bd0e58e
Made collect neighbors, queuebuf number, uip-ds6 configuration settable through project-conf.h
2010-10-24 21:12:31 +00:00
dak664
123e3cae41
Fix compiler warnings
2010-10-23 15:26:46 +00:00
oliverschmidt
5e10cf2eed
Implemented cfs_opendir() and friends for CBMs based on cc65's cbm_opendir() and friends.
2010-10-23 13:48:06 +00:00
oliverschmidt
9e9eb4b55c
There's no point in pulling in cfs-posix-dir.c if the POSIX functions it depends on are dummies anyway.
2010-10-23 08:17:45 +00:00
joxe
a1e7d9c256
fixed some config params to avoid re-defining if already defined
2010-10-21 18:25:39 +00:00
adamdunkels
37a4200f40
Made a lot of things configurable via the (optional) project-conf.h
2010-10-20 22:21:16 +00:00
oliverschmidt
da7c9700cb
Added support for the FTP standalone client to the c128 target.
2010-10-19 22:41:24 +00:00
oliverschmidt
bcc2120570
Added support for the FTP standalone client to the c64 target.
2010-10-19 22:31:59 +00:00
oliverschmidt
842c6a018a
The recent global change regarding htons allowed to remove this hack :-)
2010-10-19 20:30:47 +00:00
adamdunkels
5585d72c86
A simple but substantial change: uIP used the htons()/HTONS() macro
...
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.
This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
kasunch
5a46c629de
Added missing slip.c file to CONTIKI_TARGET_SOURCEFILES
2010-10-19 17:05:45 +00:00
oliverschmidt
f4e2c41c76
Added support for the FTP standalone client to the atari target.
2010-10-16 11:42:40 +00:00
oliverschmidt
abe360e9fb
Added support for the FTP standalone client to the apple2enh target.
2010-10-16 10:41:46 +00:00
oliverschmidt
b943e73b9b
Made default IP config identical to minimal-net and log the IP config similar to minimal-net.
2010-10-15 21:14:18 +00:00
nifi
9a4d17fe7c
Bug fix: put device in standby mode at startup in case it has previously been put in deep power-down mode; patch by Martin Bor
2010-10-12 22:55:11 +00:00
oliverschmidt
a5df3e8d00
Removed unnecessary include.
2010-10-12 19:57:44 +00:00
oliverschmidt
284f7166b7
Allow standalone win32 programs to exit the Contiki process by calling LOAD_UNLOAD().
2010-10-12 11:03:53 +00:00
adamdunkels
93f6fda353
Updated configuration options to reflect recent changes. Increased number of queuebufs. Corrected the name of the collection neighbors option.
2010-10-03 20:40:42 +00:00
oliverschmidt
3c733a0c4e
Added section on 'dir2atr' now that there's an "official" download.
2010-10-03 11:01:32 +00:00
oliverschmidt
828378ab47
Replaced "retro" color scheme with ergonomic color scheme.
2010-10-03 10:30:53 +00:00
oliverschmidt
23aea9df35
On the Atari it seems reasonable to start on a clear b&w screen even for non-CTK apps.
2010-10-02 22:07:24 +00:00
oliverschmidt
5d54b6aba8
Now that I understand that the Atari is in fact monochrome using black & white seems the logical consequence.
2010-10-01 20:27:06 +00:00
oliverschmidt
f3b4024375
Give the use a chance to read an error message before returning to the DOS menu (like on the Apple II).
2010-09-29 21:11:21 +00:00
oliverschmidt
c839eacbdf
Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/ .
2010-09-29 19:44:01 +00:00
oliverschmidt
f70d4c600d
Minor wording change.
2010-09-29 12:07:02 +00:00
oliverschmidt
cd24e920b6
Made cfs-based webserver example compatible with 8.3 file systems.
2010-09-28 20:40:52 +00:00
oliverschmidt
8eeeef17d1
Made cfs-based webserver example compatible with 8.3 file systems.
2010-09-28 19:36:16 +00:00
oliverschmidt
b2fe3db298
Just name the binary always 'contiki'.
2010-09-28 19:23:30 +00:00
fros4943
93b953f815
moved contiki-specific initialization to separate function
2010-09-24 12:59:06 +00:00
kasunch
75e4e80df2
Adding machine dependent SLIP routines source file to the sources list
2010-09-20 18:34:14 +00:00
kasunch
ce8bb8df9c
Adding machine dependent SLIP routines for UART0.
2010-09-20 18:30:25 +00:00
kasunch
6104922c40
Added new network initialization source file to the sources list.
2010-09-20 18:22:28 +00:00
kasunch
4ebc114e90
Now, all network related initialization code segments are in one file
2010-09-20 18:15:27 +00:00
kasunch
3f1bea1ed3
1. Initialized SLIP when uIPv4 or uIPv6 is used.
...
2. Random number generator is initialized using both node id and unique hardware id
3. Printing MAC address is moved to network initialization section.
2010-09-20 18:07:25 +00:00
kasunch
cdc68b13e0
1. Added uIPv6 configuration options.
...
2. Fine tuned some configuration options to save RAM.
2010-09-20 17:56:14 +00:00
dak664
110bc0242e
Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum
2010-09-17 21:59:09 +00:00
dak664
dc9f16131c
Make fake routines conditional on CONTIKI_NO_NET
2010-09-14 19:16:53 +00:00
dak664
6d3c276e7e
Add rpl configuration and webserver options.
2010-09-14 19:13:05 +00:00
dak664
b9b4f07ad9
Add internal webserver option
2010-09-14 17:03:29 +00:00
dak664
0858f71e6a
Add rpl webserver option
2010-09-14 16:59:44 +00:00
oliverschmidt
6e5e560e33
Up to now *all* Contiki apps for the Apple2 were built for maximal RAM - which means that they can't return to OS level but must reboot on exit. However many apps can get along well with 1kB less memory - which allows them to exit to the OS.
...
Therefore now the default is 1kB less memory - and apps actually needing maximal RAM can get it by adding WITH_REBOOT to their DEFINES.
2010-09-08 22:50:56 +00:00
joxe
f02cdc7c8f
minor polish to the phidget sensor driver
2010-08-27 12:58:57 +00:00
joxe
53840aca67
added basic phidget support for the Z1
2010-08-27 12:17:40 +00:00
nifi
91be7cebc4
Node ID is stored in external flash and restored on bootup
2010-08-26 22:08:11 +00:00
dak664
3bee71ad81
Add simple webserver for RPL status
2010-08-26 18:55:43 +00:00
joxe
a461eceff8
fixed configuration of button sensor
2010-08-26 16:01:20 +00:00
joxe
2c5f5cd849
added init of xmem for z1 platform
2010-08-26 09:16:39 +00:00
nifi
7d34fd1deb
Added Sentilla USB platform. This platform is similar to the Sky platform but without the sensors and with 2 leds.
2010-08-25 19:57:33 +00:00
nifi
14873a923b
Added temperature sensor for the builtin temperature sensor in MSP430
2010-08-25 19:34:06 +00:00
nifi
198db63c3b
Moved the ADC configuration to sky-sensors.c and sensors now only need to specify their sample channel. This helps to avoid conflicts when using multiple sensors.
2010-08-25 19:30:52 +00:00
joxe
d946fdd574
added Z1 xmem + coffee driver
2010-08-25 17:28:15 +00:00
joxe
645c48a332
added Z1 platform
2010-08-24 16:26:38 +00:00
joxe
b04ebb2b29
minor fix for making the msp430 makefile work for msp430X arch
2010-08-24 16:24:11 +00:00
oliverschmidt
164d55e39d
Reduced MTU size in order to allow for a reasonable (and full screen width) URL length.
2010-08-14 08:32:00 +00:00
dak664
885fee3561
Add RPL border router process
2010-08-06 17:39:31 +00:00
dak664
75de6f9fb0
Rerevert to misspelled HARWARE_REVISION
2010-08-03 21:42:05 +00:00
dak664
ea9e5bef1c
Revert mistaken hardware name change!
2010-08-03 20:18:54 +00:00
dak664
f2f7c169ea
Reduce RIME max time to fit in 16 bit timer
2010-08-03 20:01:21 +00:00
dak664
52feb47d5e
Change RIME max time to fit in 16 bit timer
2010-08-03 19:58:35 +00:00
dak664
3a8085b159
Change RF channel to 26 for econotag compatibility
2010-08-03 19:56:27 +00:00
dak664
b706c48efd
Add experimental RPL code
...
Change RF channel to 26 for econotag compatibility
2010-08-03 19:55:42 +00:00
maralvira
1cfa126568
enable sicslowpan fragmentation
2010-07-28 18:51:27 +00:00
maralvira
fe16506d1d
increase UIP buffer size to 1300 to allow full size ipv6 packets
2010-07-28 18:51:00 +00:00
maralvira
8dce85c308
don't need BLOCKING_TX anymore with the recent bugfixes
2010-07-28 18:50:07 +00:00
oliverschmidt
e53c34770a
Integrated latest enhancements contributed by Kajtar Zsolt:
...
- Use cc65 C library _filetype for writing instead of fixed 'p'.
- Support for fake O_TRUNC through SCRATCH.
2010-07-22 10:16:58 +00:00
oliverschmidt
8a6f7a1dcf
The cc65 C64 memory layout offers enough memory for larger URLs so have a nice scrolling URL text entry field.
2010-07-20 22:47:42 +00:00
oliverschmidt
cb929a3e5c
Adjusted assembler to reference uip_aligned_buf instead of uip_buf.
2010-07-20 20:42:25 +00:00
joxe
857883558b
adapted to the new spi and cc2420 naming - and split config file
2010-06-23 10:25:54 +00:00
joxe
80942abaf7
split hw config into platform-conf and adapted to new SPI and CC2420 naming
2010-06-23 10:18:05 +00:00
dak664
08897e1c1f
Add explicit queuebuf and packetbuf to build
2010-06-22 17:10:24 +00:00
joxe
365db27f92
moved CC2420 configuration into the conf file
2010-06-22 06:48:43 +00:00
joxe
47053c2cdb
added LOOP count configuration for cc2420dbk
2010-06-22 06:39:44 +00:00
joxe
f758f6569e
moved cc2420 config to platform config
2010-06-21 19:57:18 +00:00
joxe
80ec597f75
moved config from cc2420 to micaz
2010-06-21 19:53:58 +00:00
nifi
2ca32f9c76
Enabled 32-bit clock ticks to allow longer timeouts.
2010-06-21 15:15:10 +00:00
dak664
e51f03eeb1
Turn off radio DEBUGFLOW printing
2010-06-18 15:45:55 +00:00
dak664
ac6f837e4a
Use RF230BB for compilation - untested!
2010-06-18 15:33:15 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
adamdunkels
951fd78f6c
ctimer moved from net/rime to sys/
2010-06-14 18:58:45 +00:00
maralvira
994067aecd
bring econotag conf in-sync with sky.
...
Increase the size of the route and neighbor tables; remove the uIP
packet buffer queue for every neighbor to save RAM
2010-06-14 15:56:09 +00:00
adamdunkels
f81ca85157
Increase the size of the route and neighbor tables; remove the uIP packet buffer queue for every neighbor to save RAM
2010-06-14 07:04:20 +00:00
fros4943
8f1988e7fc
using OBJECTDIR instead of "obj_cooja" + bugfix: allow for externally defined CC
2010-06-11 15:17:26 +00:00
maralvira
c01421fbb5
update process initialization and call ctimer_init
2010-06-09 18:05:38 +00:00
maralvira
7aa44f14d9
initial redbee-econotag commit
...
based on commit aac3a355451d899f02737f2907af8c874ee4feba of
git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-09 14:46:30 +00:00
joxe
c4278dedc2
replaced uip_buf with the new uip_aligned_buf
2010-06-03 11:37:50 +00:00
nifi
eb63cb21e0
Added make variable with command name to show in warning
2010-05-27 12:42:48 +00:00
joxe
97fc9d2ee8
no aaaa address if configured for RPL
2010-05-25 21:32:41 +00:00
joxe
50cca91d93
made use of the new link-local address api in ds6
2010-05-09 17:53:31 +00:00
dak664
6909f291af
Use siimple ethernet address translation for RF230BB by default.
...
That gets pings and webserver working again for Vista and W7.
Hopefully it won't break something that already works...
2010-05-08 17:17:17 +00:00
oliverschmidt
bf3ec8c452
Reverting to the "old" plain uip_buf allows the Apple2 to revert to the previous memory layout.
2010-05-08 07:26:20 +00:00
oliverschmidt
62ca797fad
The recent change turning uip_buf from an array to a pointer increases the code generated by cc65 significantly :-(
...
This change modifies the set of modules placed in the Apple2 Language Card to again make maximum use of that memory without overflow.
2010-05-07 21:02:35 +00:00
nifi
4aba60ad25
acc-sensor and ext-sensor moved to the jcreate platform
2010-05-06 13:55:21 +00:00
dak664
e78984aa25
Bugfixes and additional testing contributed by Mauro Greco. Still a probabe bug when coffee page size is a multiple of physical page size and FLASH_COMPLEMENT_DATA=0
2010-05-04 14:08:01 +00:00
nifi
ed472717f2
Added Sentilla Jcreate platform. This platform is similar to the Sky platform but with other sensors and 8 leds.
2010-05-03 21:57:35 +00:00
nifi
7cebc4ed99
added missing include
2010-05-03 13:55:26 +00:00
nifi
bf198ec695
Moved sensors setup to contiki-sky-platform.c and common make rules to Makefile.common for easier reuse in similar platforms
2010-05-03 13:51:11 +00:00
fros4943
79aa299531
fixed random seed for cooja motes
2010-05-02 09:42:15 +00:00
joxe
aa980e3f67
removed initialization of RPL from platform main
2010-05-01 13:07:31 +00:00
joxe
3c9256c39f
removed RPL routing state struct from platform config file
2010-05-01 12:04:13 +00:00
nvt-se
d529132002
Added missing parts of the RPL configuration
2010-04-30 15:06:00 +00:00
joxe
b0640af3a2
added rpl support for tmote sky - enabled by default
2010-04-30 13:52:14 +00:00
oliverschmidt
5dd5b5ac43
Adjusted typdefs to Cygwin 1.7 (now not compatible anymore with Cygwin 1.5).
2010-04-21 20:35:22 +00:00
oliverschmidt
5640f89259
In contrast to Cygwin 1.5 Cygwin 1.7 doesn't allow to get __argc out of thin air anymore. Instead of finding a workaround I opted to remove the whole command line checking here which was added so revisions ago. The reasoning:
...
The WinPcap driver presumes to be obligatory for the application. Therefore it quits the whole application if it can't initialize successfully.
In former times the WinPcap driver required a cmdline parameter to initialize properly. The netsim target presumably doesn't consider the WinPcap driver obligatory for its applications so it checks the cmdline and starts the WinPcap driver only if it finds the WinPcap cmdline parameter present. Thus it prevents the WinPcap driver from failing to initialize which brings down the whole application.
However recently the WinPcap driver was changed to just use some default value if its cmdline parameter isn't found. So there's no more need to keep WinPcap from starting just to make sure it doesn't bring down the whole application. The presumption behind all this reasoning is that a WinPcap driver running with some (potentially wrong) default isn't worse than a WinPcap driver not running at all.
2010-04-21 20:27:28 +00:00
oliverschmidt
8b6d34dbfc
Configure maximum number of C128 web server connections indirectly via maximum number of TCP connections.
2010-04-11 21:34:18 +00:00
oliverschmidt
67e775ecee
The maximum number of C64 web server connections is now equal to the (new) default as the CBM PFS allows for 10 open files.
2010-04-11 21:30:14 +00:00
oliverschmidt
8108585795
Configure maximum number of Apple2 web server connections indirectly via maximum number of TCP connections.
2010-04-11 21:23:45 +00:00
oliverschmidt
ce412471e4
Integrated latest fix contributed by Kajtar Zsolt.
2010-04-06 09:46:58 +00:00
oliverschmidt
f38a3ff06c
Added Platform-specific File System (PFS) for the C128 contributed by Kajtar Zsolt.
2010-04-05 15:25:49 +00:00
oliverschmidt
7089ce05e2
Added Platform-specific File System (PFS) for the C64 supporting IDE64 fast R/W contributed by Kajtar Zsolt.
2010-04-05 14:11:01 +00:00
fros4943
170e4d6a99
sky simulation bug workaround: explicit write to compare register wakes up timer scheduling again
2010-03-31 13:15:32 +00:00
fros4943
c21ff48788
ip forwarding only for ipv4
2010-03-31 10:22:33 +00:00
fros4943
c2354a5797
changed cooja platform default uip4 configuration to use uip_over_mesh with a slip gateway
2010-03-31 09:39:46 +00:00
oliverschmidt
8dd2b75383
Explicitly set CBM filetypes (PRG, USR).
2010-03-31 06:05:37 +00:00
fros4943
e640c61b78
commented unused functions
2010-03-29 12:57:57 +00:00
fros4943
e3e69afd15
changed to ds6 module, instead of obsolete netif module
2010-03-29 11:52:08 +00:00
fros4943
9dfce4bea1
removed bad uip-netif.h include
2010-03-29 10:43:03 +00:00
fros4943
540f30d855
improved support for checkpointing operations via serial, several minor fixes
2010-03-29 09:48:06 +00:00
oliverschmidt
54e19782ae
Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations.
2010-03-27 15:16:57 +00:00
oliverschmidt
6769e6a99f
- Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations.
...
- Completed declarations.
2010-03-27 14:46:08 +00:00
fros4943
a5092220b4
fixed next timer variable types
2010-03-25 09:12:03 +00:00
adamdunkels
2a3d0dc042
Bugfix: data that has been prepared with the prepare() method must be possible to send multiple times
2010-03-23 15:19:55 +00:00
adamdunkels
432a3fd12e
Bugfix: the return values from the cca method were switched
2010-03-23 15:10:27 +00:00
fros4943
1322195921
defining rtimer_clock_t to the same as clock_time_t
2010-03-23 13:34:00 +00:00
fros4943
c66dd0b1bf
implemented rtimer library for simulated contiki motes
2010-03-23 13:13:17 +00:00
fros4943
49526e100f
added simulated interrupt thread, currently only used to implement rtimer functionality
2010-03-23 13:12:41 +00:00
fros4943
bee0ea4834
temporarily turning on radio for sending a packet
2010-03-23 12:13:43 +00:00
adamdunkels
03d1388c0d
Print out MAC and RDC when booting cooja nodes
2010-03-23 12:08:05 +00:00
adamdunkels
cd3a7c7a73
Dummy watchdog implementation for cooja nodes
2010-03-23 12:07:03 +00:00
nifi
58e47d1d97
activated workaround for memcpy/memset bug in mspgcc
2010-03-21 10:44:58 +00:00
joxe
29335f2f7d
added possibility to hard-code 7 bytes of the MAC address - last byte picked from nodeid
2010-03-19 14:08:15 +00:00
adamdunkels
fc61ee5dbb
Bugfix: turn on watchdog before starting processes to avoid a process hanging in its startup phase
2010-03-19 13:28:27 +00:00
adamdunkels
91afe5b0f4
Turned on broadcast announcements by default, turn on announcements for collect
2010-03-19 13:27:46 +00:00
dak664
9bcf982d87
Update minimal net to new ds6 interface
2010-03-18 20:11:54 +00:00
dak664
d1f1fae689
update to ds6 calls
2010-03-18 14:52:50 +00:00
dak664
f03600d4e3
update to uip-ds6.c
2010-03-18 14:36:00 +00:00
dak664
de2f5aaddc
change for ds6 calls
2010-03-17 20:19:33 +00:00
joxe
7d220c910a
removed uip_router
2010-03-16 15:45:20 +00:00
nifi
0299aab5e4
Fixed to use sky-sensors to setup ADC12
2010-03-15 23:37:01 +00:00
dak664
cae40439d7
Add optional RS232 debugging
2010-03-15 18:56:13 +00:00
joxe
fd3d6c44d0
integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling
2010-03-15 16:41:24 +00:00
fros4943
645d505f46
contiki-cooja-main.c requires CLASSNAME
2010-03-15 11:03:17 +00:00
fros4943
5b2caf2050
removed the use of a template source file when compiling for the cooja platform, instead compiling against contiki-cooja-main.c.
...
this change simplifies access to the contiki main source, and makes the cooja platform more similar to other contiki targets
2010-03-15 11:02:57 +00:00
fros4943
89d7d926c4
added ipv4 and ipv6 default configuration
2010-03-10 12:18:29 +00:00
fros4943
7465fb812a
removed explicit init-net*.c for cooja platform, instead performed in main file (contiki-template.c)
2010-03-10 12:18:07 +00:00
fros4943
f8488925eb
added uip-driver (for both ivp4 and ipv6), setting WITH_UIP* compiler flags in Makefile
2010-03-10 12:15:52 +00:00
fros4943
f36cfffc99
Makefile target for uploading precompiled firmware, example:
...
make upload-ihex FILE=myfile.ihex
2010-03-10 11:46:57 +00:00
fros4943
98929bd2f5
cooja-platform netstack conf example
2010-03-10 07:35:49 +00:00
fros4943
45a6740782
radio sensor was removed
2010-03-10 07:35:09 +00:00
fros4943
48d6d1fd6d
removed no longer used cooja/contiki synchronization variables
2010-03-09 08:14:31 +00:00
fros4943
0cc96ae481
net stack update: currently fixed to null* and rime.
2010-03-09 08:14:06 +00:00
fros4943
f87458c558
removed radio "sensor" (only used for signal strengths, also available in radio driver)
2010-03-09 08:12:15 +00:00
fros4943
07753fb01f
updated radio driver, simplified code
2010-03-09 08:11:05 +00:00
oliverschmidt
8ca206aa6b
Changed ETH64 base address from $DE10 to $DE00 as this is the default base address according to the manufacturer.
2010-03-06 13:05:16 +00:00
nvt-se
0fc1c00f09
Use LPP for radio duty cycling. 1 Hz channel check rate
2010-03-04 15:04:28 +00:00
nvt-se
20cae40694
use CSMA
2010-03-04 14:36:48 +00:00
nvt-se
2aa9d22f34
Switched to the NETSTACK API.
2010-03-04 14:16:30 +00:00
nifi
efe8f200af
Updated to match the new netstack api
2010-03-02 22:40:39 +00:00
dak664
d3697344ec
Update for NETSTACK_CONF_FRAMER
2010-03-02 16:25:47 +00:00
dak664
7c020468b5
Remove frame.h include, expose raven_ping6 for external calls
2010-03-02 15:15:03 +00:00
nifi
1025e7337c
Added configurable router module
2010-03-01 14:46:57 +00:00
nifi
5e43a6998b
Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.
2010-03-01 13:30:21 +00:00
dak664
feb6aa0ed2
Change back to SICSLOWPAN_COMPRESSION_HC06 from SICSLOWPAN_COMPRESSION_HC01
2010-02-28 21:39:40 +00:00
dak664
39e6f6a830
Clean up, functional webserver for further testing of low power protocols
2010-02-28 21:29:19 +00:00
dak664
5debc183a9
Enable radio stats in sensor cgi as default
2010-02-26 21:38:57 +00:00
dak664
844b3a34f7
Platform 0 was matching by default
2010-02-26 21:15:28 +00:00
c_oflynn
b5b77ac47a
Use new HC06
2010-02-26 10:55:00 +00:00
joxe
80b289f7c1
updated sky platform for new sicslowpan
2010-02-25 15:51:37 +00:00
kasunch
350fb21ff7
Adding a Makfile for example applications.
2010-02-24 09:14:46 +00:00
kasunch
80a408526f
Adding an example application for battery sensor
2010-02-24 09:13:56 +00:00
kasunch
c90b76427a
Adding ADC sources and battery sensor source to CONTIKI_TARGET_SOURCEFILES.
2010-02-24 09:09:35 +00:00
kasunch
0c9612b7b9
Adding battery sensor
2010-02-24 09:05:40 +00:00
kasunch
ea53e5b845
Adding ADC functions
2010-02-24 09:04:58 +00:00
nifi
07ee8458e7
Fixed bootup printf() with 32-bit timer values
2010-02-23 21:02:30 +00:00
nifi
bb9d430138
added bootup print of NETSTACK_RDC name
2010-02-23 20:54:09 +00:00
adamdunkels
85a9f7db42
Fix bootup printf() with 32-bit timer values
2010-02-23 18:45:16 +00:00
adamdunkels
eadfe5f3d6
Enabled 32-bit clock ticks to allow longer timeouts; experimentally disabled polite announcements in favour of a non-announcement based collect protocol
2010-02-23 18:44:52 +00:00
adamdunkels
69a5b67523
Updated netsim to new netstack API
2010-02-23 18:44:08 +00:00
adamdunkels
08f06d8039
Updated to new sensors API
2010-02-23 18:43:43 +00:00
adamdunkels
757ca59511
Added netstack init to native platform
2010-02-23 18:43:21 +00:00
adamdunkels
ebea184116
Added netstack config for CC2420 radio driver, and also for cxmac RDC layer (which is not confirmed if it runs on real hardware, only tested in simulation)
2010-02-23 18:42:41 +00:00
dak664
e695e4860d
Allow build with original radio driver using $make RF230BB=0
2010-02-23 17:43:20 +00:00
dak664
64d57a3dd8
Update jackdaw to new radio driver interface
2010-02-23 17:35:49 +00:00
dak664
a64a8674bc
Remove debug print
2010-02-23 02:22:25 +00:00
dak664
cbb8621e30
update to new driver format
2010-02-22 22:23:18 +00:00
adamdunkels
60425aa355
ESB uses tr1001 radio
2010-02-18 23:53:21 +00:00
adamdunkels
fa4d4db329
Use the common netstack_init
2010-02-18 23:19:03 +00:00
adamdunkels
927aa821c3
Updated to new MAC api
2010-02-18 23:10:06 +00:00
adamdunkels
459c550cbd
Updated to match the new netstack api
2010-02-18 23:04:54 +00:00
adamdunkels
e34eb54960
A work-in-progress rework of the Contiki MAC and radio layers. The
...
main ideas are:
* Separates the Contiki low-layer network stack into four layers:
network (e.g. sicslowpan / rime), Medium Access Control MAC
(e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
that specify what mechanism/protocol/driver to use at the four
layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
the fate of a transmitted packet: if the packet was not possible to
transmit, the cause of the failure is reported, and if the packets
was successfully transmitted, the number of tries before it was
finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
efficient radio duty cycling protocols: channel check, pending
packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
#defines.
2010-02-18 21:48:39 +00:00
dak664
6df1e0ca58
add experimental cxmac code
2010-02-18 17:24:12 +00:00
dak664
38c5922294
experimental cxmac code
2010-02-18 17:23:19 +00:00
dak664
72e1528ea7
Make sicslowmac the default!
2010-02-16 23:42:06 +00:00
dak664
1da06eff83
Specify mac driver in contiki-conf.h
2010-02-16 22:22:13 +00:00
dak664
53801ffbb1
Add optional RF230BB radio driver
2010-02-16 22:17:51 +00:00
dak664
1bdff78e6e
Remove compiler warnings
2010-02-15 20:54:37 +00:00
joxe
3a2eec2b1a
fixed ext-sensor for jcreate
2010-02-13 11:20:48 +00:00
oliverschmidt
a66821f1d1
Explicitly turn on forms and centering for consistency reasons.
2010-02-13 10:46:36 +00:00
oliverschmidt
7ef7efecd8
Without forms, centering and history we can just squeeze in DNS.
2010-02-13 10:44:23 +00:00
dak664
dd4bf06430
Add serial command to send voltage measurement to webserver
2010-02-12 16:46:39 +00:00
dak664
ed76239525
Add RADIOSTATS to sensors cgi
2010-02-12 16:42:59 +00:00
dak664
c0e12ffa54
Enable ADC2 for optional external supply voltage measurement
2010-02-11 21:58:51 +00:00
dak664
cc47c556e7
Optionally measure ADC2 along with temperature
2010-02-11 20:49:31 +00:00
dak664
e9d760bf9e
Convert <CR><CR><LF> line endings to <LF>
2010-02-11 20:42:36 +00:00
dak664
e4ec444611
Send optional ADC2 measurement to 1284p
2010-02-11 20:35:22 +00:00
dak664
4576b7b671
Add option to measure external supply voltage on ADC2
2010-02-11 20:22:11 +00:00
dak664
e7d2b64894
Convert <CR><CR><LF> line endings to <LF>
2010-02-11 20:19:51 +00:00
dak664
97ea7b0376
Add SEND_ADC2 command definition
2010-02-11 18:37:21 +00:00
dak664
6a2d1c057a
Allow cygwin remakes and cleans
2010-02-11 18:34:39 +00:00
dak664
c321531021
Document temperature and voltage measurement features and/or bugs
2010-02-11 18:31:27 +00:00
dak664
5eacbeedba
*** empty log message ***
2010-02-10 22:53:55 +00:00
oliverschmidt
50be40768b
Removed closing of stdin, stdout (and stderr on the Apple2). It was introduced in order to maximize the number of available file handles for the webserver. However none of the target machine DOSes allows to open a single file several times diminishing the intended effect very much. One the other hand not being able to "just printf() something" causes trouble over and again - i.e. hello-world seemingly not working...after all a typical case of german over-enigneering ;-)
2010-02-10 07:43:25 +00:00
dak664
fe8417bd8a
Clarify defines for RF230 and effect on program size
2010-02-09 17:03:55 +00:00
dak664
282ffaf343
Add conditional boot messages and file logging
2010-02-09 14:43:16 +00:00
dak664
03c0245465
Expose httpd-cgi ipv6 address print to other modules
2010-02-09 14:41:18 +00:00
nifi
a6c6522548
Updated documentation for new APIs.
2010-02-09 08:29:58 +00:00
nifi
27d5e2338a
Added convenient flag to include codeprop
2010-02-09 07:34:37 +00:00
nifi
dbacc71c7d
Added missing uip-ipchksum when using IP
2010-02-09 07:04:11 +00:00
nifi
665c38e7f4
Set elfloader to use flash instead of ram for storage as default.
2010-02-09 06:52:26 +00:00
dak664
e12e794a74
QUEUEBUF fragmentation defines
2010-02-08 22:22:27 +00:00
adamdunkels
6414bf3a55
Enabled sicslowpan fragmentation and reassembly by default on the sky platform
2010-02-08 22:12:29 +00:00
dak664
1911dc4956
Defines for fragmentation handling
2010-02-08 22:09:25 +00:00
adamdunkels
590b4786c5
Added queuebuf statistics option, since it is used by the examples/rime/example-rudolph1.c code (on the netsim target)
2010-02-08 21:39:15 +00:00
nifi
978d383395
Corrected include path
2010-02-08 00:02:39 +00:00
nifi
9ee6406824
minor code style cleanup
2010-02-08 00:00:45 +00:00
adamdunkels
091483c150
Added dummy watchdog functions for all AVR platforms
2010-02-07 07:43:35 +00:00
joxe
1da7c3eccd
convert registers upto 9 instead of upto 4
2010-02-06 18:28:26 +00:00
adamdunkels
3717c39431
Updated the ext-sensor to use the new sensor API; patch by Jesper Karlsson
2010-02-06 14:41:24 +00:00
adamdunkels
aaab082f27
Correctly print out the aaaa: address, if enabled
2010-02-06 10:00:49 +00:00
adamdunkels
37f7770bd8
Made it possible to override the SICSLOWPAN_CONF_FRAG option. Increased the default uIP buffer size on IPv6 to provide some room for fragmented packets
2010-02-06 10:00:25 +00:00
nifi
d210d930fd
added missing end bracket
2010-02-05 16:45:56 +00:00
nifi
c67a4155d5
Changed to use tcpip_icmp6_event for ICMP notifications.
2010-02-05 15:16:02 +00:00
ksb
217eaaa071
Generic STM32F103 platform
2010-02-05 14:47:42 +00:00
nvt-se
32c5fcb583
avoid broadcast storms during the test
2010-02-05 11:52:37 +00:00
fros4943
b9bf06c2a7
decreased default cooja CFS size
2010-02-05 08:59:51 +00:00
c_oflynn
95d0b09954
-Fix that can cause USB stick to freeze up
...
-Add EEM Support
2010-02-04 10:40:00 +00:00
oliverschmidt
2a6f169e46
- Added yet another PETSCII->ASCII conversion, this time for the file name in case of a 404.
...
- Use all lowercase for the 404 message to avoid another PETSCII->ASCII conversion.
- Write logfile entries for all 404s.
- Adjust memory buffers on the C128 to accomodate for the items above.
2010-02-03 23:19:39 +00:00
oliverschmidt
4a9cc0c1d0
Reverted last change because the change making it necessary in the first place was reverted.
2010-02-03 22:53:59 +00:00
nifi
18f5ef71f0
added missing include
2010-02-03 20:30:07 +00:00
adamdunkels
a9c742402c
Use cxmac for IP, xmac for non-IP. Increased uIP buffer size for IPv6 to accomodate ICMP packets
2010-02-03 16:48:04 +00:00
adamdunkels
14ddf7450d
Initialize ctimers
2010-02-03 16:47:26 +00:00
nifi
002e508703
fixed compiler warning
2010-02-03 13:59:55 +00:00
adamdunkels
f9e991c0dd
Turning of the MAC protocol in the IPv4-over-mesh actually made performance worse due to broadcasts being received multiple times, which interfered with SLIP I/O
2010-02-03 01:20:47 +00:00
oliverschmidt
f06c7a8ffd
Reduce number of memory block to accomodate for new directory listing code (which won't actually work due to missing directory I/O support).
2010-02-02 22:23:57 +00:00
joxe
09c3ba2753
minor cleanup
2010-02-02 21:17:44 +00:00
joxe
fd4aebdf7f
refactored some ADC code into sky-sensors and made it possible to turn off sensors to save energy
2010-02-02 20:59:45 +00:00
adamdunkels
1a2bdcb293
Fixed typo
2010-02-02 20:10:06 +00:00
dak664
3f5bb28383
Allow ip4 address override, show ip6 address
2010-02-02 17:51:55 +00:00
adamdunkels
4e830b1b5d
Dummy watchdog implementation so that programs that use the watchdog compiles
2010-02-02 17:04:18 +00:00
adamdunkels
88fb1c80c9
Do not activate the sensors by default: sensors should be activated by the applications that need them
2010-02-02 16:25:30 +00:00
oliverschmidt
6240db4170
Minor wording change.
2010-02-01 22:15:41 +00:00
oliverschmidt
ab04ee0d10
Optimized C128 color set for 80 column display.
2010-02-01 21:26:20 +00:00
adamdunkels
d0d52638b8
Disable (debugging-) initialiation of aaaa:: address; add CSMA MAC for IPv6/6lowpan
2010-02-01 11:55:04 +00:00
oliverschmidt
fc7b0d31bc
Added configuration values for the email client example.
2010-01-31 21:50:11 +00:00
oliverschmidt
35dc059ad0
Added support for non-window CTK email client example.
2010-01-31 21:49:13 +00:00
oliverschmidt
c0932be656
Added configuration values for the IRC client example.
2010-01-31 20:42:49 +00:00
adamdunkels
f63f6a7a88
Added default configuration options for the cxmac driver
2010-01-31 18:48:41 +00:00
oliverschmidt
6111814aec
Added configuration values for the IRC client example.
2010-01-31 18:30:50 +00:00
oliverschmidt
3826b8c0c4
Use only the base name of projects as program file name.
2010-01-31 18:21:41 +00:00
oliverschmidt
953d3ce7a0
Now that we have at least two examples working on the cc65 targets it is preferable to not name the program files all 'contiki'.
2010-01-31 09:34:12 +00:00
oliverschmidt
26c9ec41f7
Activate uIP logging when "high level config" logging is enabled.
2010-01-30 20:48:31 +00:00
oliverschmidt
f5c78bd4fd
Added a gnumake 'target-specfic variable' to add the C preprocessor define necessary for clean DLL linkage.
2010-01-30 11:52:01 +00:00
adamdunkels
ba2c445676
Reduce the TCP MSS so that it runs nicely over IPv6/802.15.4
2010-01-28 13:38:40 +00:00
oliverschmidt
671bfb0f2b
Removed directory.dsc and www.dsc from Visual Studio 2008 build.
...
There aren't created using the Cygwin build too - which btw. makes sense as those two programs are configured to have own icons on the desktop.
2010-01-28 12:59:47 +00:00
oliverschmidt
4f9c4d7dda
Adjusted the win32 'platform build' (which creates an old-school Contiki OS) to the changed dependency handling.
...
The special module-compile rule didn't work anymore now that the make doesn't create the .d beforehand. However the ordinary compile rule in Makefile.include turns out to create object files linkable as DLLs - although with warnings. The downside of these warnings seems to be outweight by the benefit of a simpler Makefile.
2010-01-28 12:46:16 +00:00
oliverschmidt
882e4692c7
cc65 2.13. allows to define all necessary paths through the single env var CC65_HOME.
2010-01-27 22:37:15 +00:00
anthony-a
f34f720836
move RIME declaration from cpu/cc2430/Makefile.cc2430 . (or at least what I recall, did this months ago!)
2010-01-25 23:18:17 +00:00
fros4943
ee11b61064
bugfix: puts() should append newline character + min buffer size 1024 also with uIP
2010-01-25 12:34:05 +00:00
adamdunkels
5922402b3e
Added the CSMA MAC mechanism on top of the default duty cycling
...
mechanism X-MAC. The CSMA is configurable with a MAC_CSMA define, just
like the MAC protocol is configurable with the MAC_DRIVER define.
2010-01-25 11:48:16 +00:00
c_oflynn
9f6a069f96
New USB IPv6 address translation, works better with bridges. Enabled by a #define at start of sicslow_ethernet.c
2010-01-24 14:14:13 +00:00
adamdunkels
11362d0489
Remove the default list of sensors from the main() file to save space - those apps that need them can use them directly in any case
2010-01-21 11:17:08 +00:00
nifi
c9a48aa752
Updated to match the new sensors API
2010-01-15 21:37:15 +00:00
nifi
a7f8761978
Updated to match the new sensors API
2010-01-15 10:34:36 +00:00
adamdunkels
2f19892f74
Updated with the new sensors API
2010-01-15 08:50:39 +00:00
nifi
467df8ad4c
reverted accidental commit
2010-01-14 22:26:38 +00:00
nvt-se
d2655eac7a
make watchdog management slightly more abstract to simplify porting
2010-01-14 21:16:58 +00:00
adamdunkels
46753473fa
Added constants for light sensor values
2010-01-14 20:23:02 +00:00
adamdunkels
9ae29c3be5
Added light, sht11, battery sensors; restored light and battery activation since rtimers don't work without them (at present)
2010-01-14 20:18:23 +00:00
adamdunkels
bb63085f60
Added SHT11 sensor API for Tmote Sky
2010-01-14 20:16:52 +00:00
adamdunkels
4f6f6c972d
Use new sensors API
2010-01-14 20:15:55 +00:00
nifi
00e8164e58
updated vibration sensor name to Contiki standard
2010-01-14 20:02:55 +00:00
nifi
dbe56e4666
Updated to match the new sensors API
2010-01-14 20:01:18 +00:00
nifi
4ffa7b95b7
Updated to match the new sensors API
2010-01-14 19:19:50 +00:00
nifi
7154b4c68d
Removed references to irq, which is not used with the new sensor APIs
2010-01-14 19:14:47 +00:00
nifi
2a7ad011c5
Updated to match the new sensors API
2010-01-14 19:12:31 +00:00
nifi
e1c6c4993a
Removed references to irq, which is not used with the new sensor APIs
2010-01-14 18:13:33 +00:00
nifi
24f28f0f1c
Updated to match the new sensors API
2010-01-14 17:39:35 +00:00
joxe
071a9eaa6b
adapted for new sensor APIs
2010-01-14 16:13:45 +00:00
nifi
e0c0808767
removed obsolete file
2010-01-14 15:55:15 +00:00
joxe
3c0dcb45c7
fixed for updated sensors API
2010-01-14 15:50:13 +00:00
adamdunkels
fe126bc90e
Updated to match the new sensors API
2010-01-14 15:38:56 +00:00
nifi
4d03a30456
removed obsolete file (available in core/dev)
2010-01-14 14:00:45 +00:00
joxe
31ea888b75
fixed Sky platform for new sensor APIs
2010-01-14 14:00:38 +00:00
joxe
4a3953204f
changed sky sensors to new api
2010-01-14 13:53:06 +00:00
matsutsuka
23d5f84a46
Workaround for compiling some examples available
2009-12-16 06:47:17 +00:00
matsutsuka
a628b0c581
minor aesthetic modification
2009-12-11 15:00:38 +00:00
matsutsuka
1586b3b5c4
fixed minor bug of mt-test due to sdcc
2009-12-11 14:59:45 +00:00
matsutsuka
ebe74fed56
size-optimization option and peep-hole optimizer have been introduced.
...
object files have been moved to binary directory
2009-12-11 14:59:31 +00:00
adamdunkels
e3fed27f4a
Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files
2009-12-05 19:42:56 +00:00
nifi
3c1a7f3bc7
* Added configuration for radio receive buffer size (default Rime packet size)
...
* Added configuration for beep on bad crc
* Changed to drop packet if read buffer is too small rather than truncating data
* Turn off energest-listen during transmission
2009-11-19 18:04:02 +00:00
nifi
c89028a11f
reduced serial line buffer size
2009-11-18 15:34:57 +00:00
nifi
bb0ffe0478
moved rime initialization into rime router so it is easier to switch IPv6 routing module
2009-11-18 13:51:55 +00:00
nvt-se
7a9e9c72a1
switched to new radio return values
2009-11-13 12:38:14 +00:00
nvt-se
b909a62265
Reduced application buffer size for SD and switched parameter in cfs-coffee-arch.c
2009-11-11 14:59:33 +00:00
nvt-se
8c040be133
Changed the name of the declaration of the default block size. Reduced the OCR reading timeout.
2009-11-07 01:05:23 +00:00
nvt-se
7aac2d90fb
specify that energest.h is in the sys directory.
2009-11-06 17:18:47 +00:00
nvt-se
31850d2e29
wait for RX before reading, and ensure that the byte is read out by using a volatile dummy variable
2009-11-06 15:40:15 +00:00
nvt-se
731e1da844
increase the I/O rate and use etimer_restart to maintain a uniform wait time between iterations
2009-11-06 15:11:52 +00:00
nvt-se
f59e89cfb9
Fixed the problem of reads from the SPI where the first byte was sometimes lost.The SPI read function now only generates an idle symbol if there is not a byte
...
already in the reception buffer.
2009-11-06 14:02:59 +00:00
nvt-se
84f2a077de
the return value should be checked against the size of sd_buf instead of buf
2009-11-03 16:18:37 +00:00
nvt-se
9b4cd05e1f
Patch from David Gustafsson: break out SPI functions and fix bug in capacity
...
calculation.
Removed expensive modulo operations from sd_read and sd_write because the block size is now a variable. (nvt)
2009-11-03 15:21:43 +00:00
adamdunkels
d3131e1811
Print link-local IPv6 address when booting the node
2009-10-29 22:10:59 +00:00
adamdunkels
f03caa357e
Allow reprogramming invidual nodes with 'make file.upload MOTE=x' where x is the mote number just like with make login
2009-10-29 22:10:21 +00:00
nifi
831f16cf61
Fixed COOJA quickstart to run COOJA from current directory
2009-10-28 13:39:15 +00:00
fros4943
99a540fd0d
macro renamed to SPI_IS_ENABLED() to avoid confusions
2009-10-27 15:33:24 +00:00
fros4943
6b36cd9de9
added macro for checking whether SPI is ENABLED
2009-10-27 15:25:02 +00:00
nvt-se
4a0973a95f
specify the number of queuebufs that we want to use in the MSB430 platform by default
2009-10-26 16:11:24 +00:00
kasunch
ca6c8818b1
Two comment fixes
2009-10-22 15:48:20 +00:00
nifi
178548413e
added option to specify JTAG port for programming
2009-10-22 09:27:46 +00:00
adamdunkels
29e8dae88c
Added X-MAC support for IPv6/SICSlowpan nodes, added 802.15.4 default framing to X-MAC
2009-10-19 20:55:52 +00:00
fros4943
bf1920386a
increased log buffer size with uIP SLIP
2009-10-19 18:00:49 +00:00
oliverschmidt
caaa790add
cc65 2.13. comes with secondary linker configs. The 'apple2enh-reboot.cfg' is more or less what was previously engineered as part of Contiki for the Apple2 - now moved into the cc65 distro.
2009-10-18 10:06:44 +00:00
oliverschmidt
18933cc0c3
cc65 2.13. comes with builtin linker configs defining the __STACKSIZE__ symbol as weak. This allows to override the stacksize from the linker command line thus eliminating the need for linker configs maintained by Contiki.
2009-10-18 09:58:21 +00:00
oliverschmidt
d8aee18f6c
cc65 2.13. allows to
...
- explicitly set 80 column mode
- control exit behaviour from the program itself (instead of requiring a loader variant).
2009-10-18 09:37:37 +00:00
oliverschmidt
d30ccbe81d
cc65 2.13. allows to explicitly set 80 column mode.
2009-10-18 09:35:07 +00:00
oliverschmidt
31eb62821f
cc65 2.13. features a default-per-target mouse driver so there's no need to deal with their names in Contiki anymore.
2009-10-18 09:33:08 +00:00
adamdunkels
79d7c366a3
Rime polite announcements should be used when IPv6 is enabled, and not used otherwise
2009-10-18 07:15:33 +00:00
nvt-se
ed4ee1b5af
continue the test by resetting the etimer even if sd_write returns an error.
2009-10-01 16:40:25 +00:00
nvt-se
3e41c7d564
removed the immaterial sd_get_block_size function.
2009-09-24 12:09:26 +00:00
kasunch
1ee52635c8
1. Changed fuse bits to preserve EEPROM through the chip erase when uploading a new OS image.
...
2. Added a new make rule to erase EEPROM through the chip erase.
2009-09-24 07:09:31 +00:00
kasunch
71b5872045
Added node id restoring at the boot-up.
2009-09-24 06:53:35 +00:00
kasunch
5e1db8b6fa
Added node id restoring and burning functions.
2009-09-24 06:51:22 +00:00
kasunch
f617b77b87
Added the EEPROM starting address of node id.
2009-09-24 06:45:48 +00:00
nvt-se
fc34a4572b
Removed the deprecated COFFEE_DIR_CACHE_ENTRIES parameter.
2009-09-22 16:31:36 +00:00
nvt-se
3b205a8912
removed compiler warning about missing declaration.
2009-09-22 16:27:17 +00:00
nvt-se
19d697fd37
use megabyte unit for printing SD card capacity.
2009-09-22 16:24:03 +00:00
nvt-se
aef32d8144
moved synchronization word definition to the right place.
...
removed memcpy call for a two byte copy. also led to a relocation error
in some versions of the mspgcc linker.
2009-09-22 16:20:39 +00:00
nvt-se
ce32792812
define U1IFG if it is missing.
2009-09-22 16:04:03 +00:00
nvt-se
f698ce2577
Adapted the simple SD test to the new driver and its interface.
2009-09-22 15:37:18 +00:00
nvt-se
12c6dbb7c6
switched to emulated random I/O functions in the SD driver
2009-09-22 15:36:33 +00:00
nvt-se
1fb5841454
introduced WITH_SD parameter. added missing variable.
2009-09-22 15:35:45 +00:00
nvt-se
ea56edc5c2
added a simple driver for using SD devices through the SPI.
2009-09-22 15:20:51 +00:00
nifi
a71cd04144
reconfigured coffee to use larger sectors and no micrologs, changed the architecture specific erase function accordingly
2009-09-21 14:16:32 +00:00
nvt-se
4fd4cb1238
Architecture-dependent Coffee functions for SD cards.
2009-09-17 14:37:32 +00:00
nvt-se
20f449c3e8
micro logs are not needed in SD memory.
2009-09-17 14:19:06 +00:00
nvt-se
519532183f
do not enable Coffee until the new SD driver is in place.
2009-09-17 13:28:41 +00:00
nvt-se
84b0ec7798
Removed unstable SD driver (to be replaced.)
2009-09-17 13:24:49 +00:00
kasunch
4319e8b82e
1. Add MAC address displaying during the booting.
...
2. Set LEDs to turn on at different stages of the booting process.
2009-09-13 21:42:43 +00:00
kasunch
7444c41da9
Adding device driver files for the Dallas Semiconductor DS2401 chip to the CONTIKI_TARGET_SOURCEFILES list.
2009-09-13 21:28:48 +00:00
kasunch
e2224a8384
Device driver for the Dallas Semiconductor DS2401 chip.
2009-09-13 21:21:16 +00:00
oliverschmidt
392c3aa2b6
Updated URL from Loader 1.3 to Loader 1.4.
2009-09-13 19:59:34 +00:00
oliverschmidt
daf29d0a87
Supply prototype even if there's no implementation (yet) to keep compiler happy.
2009-09-13 19:07:34 +00:00
zdshelby
ec02eab6bc
- Upgraded the Sensinode platform to use sicslowmac.c
...
- Improved the rime address setup, setting the RF driver addresses (byte order may not be correct)
2009-09-11 08:03:42 +00:00
adamdunkels
bddd31abf2
Fixed compiler warnings
2009-09-09 21:06:51 +00:00
zdshelby
c4ae18e37b
Initial commit of Sensinode platform files.
2009-09-08 20:06:28 +00:00
zhitao
bdce08d39d
augmented CFS compliance for a RAM-based, one-file-only file system in Cooja.
2009-09-08 15:08:20 +00:00
kasunch
1bede62d2a
Initial files of the MICAz port.
2009-09-08 08:59:29 +00:00
joxe
ae8bd7a7b6
added inclusion of radio Makefile for the raven platforms
2009-09-07 12:06:33 +00:00
nifi
d4b619bcc5
Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430
2009-09-07 11:31:26 +00:00
nvt-se
9d7bdad864
use CLOCK_CONF_SECOND.
2009-09-04 13:59:37 +00:00
nvt-se
fed4a58102
return the amount of seconds elapsed in clock_seconds()
2009-09-04 13:57:17 +00:00
nvt-se
cd96248306
only turn off if we are not in CC1020_OFF state. (patch by Jesper Karlsson)
2009-09-04 11:00:48 +00:00
nvt-se
a21dece53f
removed unused state codes and unused printf statements
2009-09-03 12:57:57 +00:00
nifi
3a8ee769cb
Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown.
2009-08-31 12:06:34 +00:00
nvt-se
ebd91b9f9d
Removed deprecated dir cache macro.
2009-08-30 20:36:32 +00:00
adamdunkels
b71faae330
ext-sensor: new driver for external sensors (e.g. Phidgets) on the Sentilla JCreate, developed by Marcus Lunden
2009-08-25 16:24:49 +00:00
nifi
e41de15c85
use nodeid 0 if no nodeid has been set
2009-08-24 15:44:45 +00:00
nvt-se
5e0d762e79
Call BIC_SR_IRQ to properly go switch of IRQ mode in the saved flag in the stack.
2009-08-17 11:32:17 +00:00
oliverschmidt
f606253f58
Minor adjustment to predominant coding style.
2009-08-09 20:51:19 +00:00
dak664
d5047f43c1
Change ip4 addresses to agree with wiki
2009-08-08 11:42:05 +00:00
dak664
283d288f1a
Allow hello-world to build, fix makefile ignoring rf230bb
2009-07-26 12:10:38 +00:00
dak664
8ea4b747d0
Add httpd_s* function layer and HTTPD_STRING_ATTR for strings in different memory types
2009-07-24 15:41:52 +00:00
dak664
a41efba6b4
Add makefsdata.h, remove httpd-fsdata.c, make now creates with /tools/ makefsdata.
2009-07-23 17:43:51 +00:00
dak664
928bbc206a
Add static coffee file system to webserver
2009-07-23 16:16:07 +00:00
dak664
c1b7375a5a
*** empty log message ***
2009-07-23 16:13:48 +00:00
nvt-se
34a6fc82a3
Backup all the infomem before erasing the segment. Thanks to Frederik Hermans for reporting this.
2009-07-21 16:56:33 +00:00
dak664
af981496b1
Optional complemented writes/reads and faster word reads
2009-07-15 22:10:08 +00:00
dak664
8e3c2e6334
Passed tests on Raven 1284p in 3 seconds with 56KB program memory disk
2009-07-14 19:23:22 +00:00
nvt-se
b0431cc688
removed obsolete offset type definitions.
2009-07-13 20:02:16 +00:00
ksb
292e69a468
Missing file
2009-07-11 15:23:24 +00:00
ksb
3c3714c178
Use IP over Rime
2009-07-11 15:07:59 +00:00
ksb
88669e1675
Test application for USB mass storage
2009-07-11 14:53:02 +00:00
matsutsuka
2aa41337bc
followed the name change of serial-line.c
2009-07-09 18:28:20 +00:00
matsutsuka
9a752dab15
aligned the usage of LOADER_UNLOAD macro with other sources
2009-07-09 18:24:56 +00:00
dak664
49989dbe45
Add rf230bb radio driver with conditional make on RF230BB=1
2009-07-08 15:26:17 +00:00
nifi
c436b99887
added configuration of MAC driver
...
added missing initialization of serial-line
added periodic DCO/CPU speed re-synch
2009-07-07 13:06:56 +00:00
nvt-se
1e0ca9ceac
Made the use of micro logs configurable to make file modifications
...
more efficient on storage types that support inline updates.
The sky platform uses logs, and the native platform uses no logs.
2009-06-29 13:30:16 +00:00
nvt-se
828439c922
code style compliancy
2009-06-29 12:46:49 +00:00
nifi
05d4bc4532
allow UIP_CONF_ROUTER to be set as compilation flag
2009-06-29 09:54:39 +00:00
joxe
1cc33ac451
configured routing to off for sky-IPv6
2009-06-26 12:01:23 +00:00
joxe
e16d4b0f06
fixed IPV6 flags for sky
2009-06-26 12:00:49 +00:00
nvt-se
b912a41ea3
use polite announcements when running Rime over UDP.
2009-06-24 16:44:26 +00:00
nifi
912aba7280
added init function in MAC driver for easier configuration
2009-06-22 11:14:11 +00:00
dak664
17da57e989
All static strings to flash, add wildcard to file-stats cgi
2009-06-19 17:11:28 +00:00
dak664
6c30271ade
Fix html compliance, use wildcard in file-stats cgi
2009-06-19 17:09:51 +00:00
nifi
16a9656abd
Bugfix: output function was not called with latest version of tcpip. Identified by Pierre de Vos.
2009-06-01 15:13:30 +00:00
nvt-se
a7faaa9aaa
a bit more documentation.
2009-05-26 14:34:22 +00:00
fros4943
300f3396ac
allow contiki motes to handle several contiki events each tick + corrected variables types
2009-05-26 14:08:51 +00:00
nvt-se
cd00bd3fdc
switched to calm mode as default.
2009-05-26 13:23:59 +00:00
nvt-se
06a2fc40ec
switched to 32-bit iteration variable for long-running tests.
2009-05-26 13:03:44 +00:00
nvt-se
0f6954cc43
added test options for stressing the card and for switching blocks randomly.
2009-05-26 13:00:37 +00:00
nvt-se
28619eabc0
bug fix with sdspi select.
...
code style fixes.
2009-05-26 13:00:07 +00:00
nvt-se
e9d279620f
more protection against interrupts that might spoil SPI sequences.
...
made coding style more like that of contiki.
2009-05-26 12:15:46 +00:00
nvt-se
09a1c115fe
initial test port of Coffee for the MSB-430 platform.
2009-05-25 14:14:32 +00:00
nvt-se
8f7f7fb896
enabled random I/O in the SD driver.
2009-05-25 14:13:47 +00:00
nvt-se
da91d87ae6
switch of interrupts while writing and reading to the SPI. avoids
...
desynchronization problems.
2009-05-25 13:19:04 +00:00
fros4943
faec70dee0
test app update: print sensor type
2009-05-19 17:54:08 +00:00
fros4943
d54176205c
decreased default elfloader memory usage for sky platform
2009-05-18 10:32:56 +00:00
nvt-se
bcc5084564
removed delay because while loop waits until completion anyway.
2009-05-15 13:54:08 +00:00
nvt-se
f9b35795c7
minor refactoring.
2009-05-14 12:18:49 +00:00
adamdunkels
bc6c9410cc
Print out the gateway's IP address more prominently
2009-05-12 17:32:49 +00:00
adamdunkels
00890caca8
Make sure that symbols.c is included in every native cpu build, not just the native target
2009-05-12 17:23:23 +00:00
nvt-se
74e9bc8789
Added flash reads and writes to energest.
2009-05-11 15:26:24 +00:00
adamdunkels
900480959b
Increased the default number of queue buffers: there usually is plenty of RAM left, so we should be able to afford it
2009-05-10 21:15:16 +00:00
joxe
6a7bc4c3a5
added mcu-chip temperature to accelerometer sensor - value 3
2009-05-08 16:03:50 +00:00
adamdunkels
6fcca2d545
Initialize ctimer, add IPv6 address configuration for the aaaa prefix
2009-04-29 11:49:27 +00:00
adamdunkels
e6215712ca
When a node is configured as an IP gateway, we switch off the power-saving MAC protocolto improve performance and to avoid problems with the serial communication that X-MACs use of rtimers can cause
2009-04-29 11:46:20 +00:00
adamdunkels
064f4488d4
Increase default CPU speed from 2.4576 MHz to 3.9 MHz. Communication works better, at a low power cost
2009-04-29 11:43:48 +00:00
adamdunkels
bbab7ba55c
When the tmote-bsl binary is found, program only one mote at once (parallel programming with tmote-bsl doesn't seem to work)
2009-04-29 11:42:56 +00:00
fros4943
9f299c277e
added experimental slip support for contiki motes
2009-04-23 09:15:51 +00:00
fros4943
9bd3d07510
implemented slip_arch_writeb() function
2009-04-23 09:02:06 +00:00
fros4943
b65014d1be
bugfix by Wolf-Bastian Pttner: check buffer size at incoming radio data
2009-04-16 14:38:41 +00:00
fros4943
bc6704079c
cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization
2009-04-16 14:34:51 +00:00
adamdunkels
2e37fca49f
Check for tmote-bsl-linux binary under linux, and use it is available
2009-04-10 07:43:29 +00:00
adamdunkels
2545fd9069
Hack to make DS2411 ID useable as an Ethernet MAC address (remove multicast bit)
2009-04-10 00:40:08 +00:00
adamdunkels
3415ff26bd
Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS
2009-04-10 00:39:19 +00:00
nvt-se
172ffb74c7
fix compiler warnings. patch from Jesper Karlsson.
2009-04-08 14:56:00 +00:00
nifi
b41b79e3a9
Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets).
2009-04-06 17:18:20 +00:00
nifi
900d8d8e17
changed to use HC01 compression for uip6
2009-04-06 16:01:11 +00:00
nifi
8b41f3a6a8
set rime addr size to 8 for uip6, restored clock resolution
2009-04-06 14:59:49 +00:00
nifi
76b7bf43d0
added setup for uip6 with 802.15.4 frames and routing using Rime
2009-04-06 14:12:58 +00:00
nifi
a36e529df1
added configuration for panid
2009-04-06 13:31:00 +00:00
nvt-se
f53560f6a5
enabled multihop routing, increased uip buffer size.
2009-04-06 13:23:14 +00:00
nifi
c1d490b6a7
added workaround for memcpy/memset bug in mspgcc
2009-04-06 13:07:37 +00:00
adamdunkels
58331e6802
Made tick resultion more fine-grained to support a shorter LPP listen time
2009-04-03 11:46:48 +00:00
fros4943
b730fb329d
changed upload rules due to problems on linux platforms
2009-04-02 11:15:30 +00:00
fros4943
3b3580e439
disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki
2009-04-01 18:11:48 +00:00
fros4943
aa736322e1
removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead
2009-04-01 17:17:55 +00:00
fros4943
3665422d8d
simplified cooja communication stacks initialization + added uipv6 stack
2009-04-01 13:50:12 +00:00
fros4943
6a99a82516
copied uipv6 configuration from native platform
2009-04-01 13:46:56 +00:00
fros4943
1c031504e5
no need to initialize serial line
2009-04-01 13:46:16 +00:00
fros4943
892bfb5678
moved radio-uip link functionality directly to comm stack sources
2009-04-01 13:45:41 +00:00
fros4943
eddd8350c5
renamed radio driver
2009-04-01 13:44:34 +00:00
fros4943
afed9bb2d0
icnlude packet radio by default
2009-04-01 13:39:54 +00:00
nifi
c6b15c289e
* show radio channel at startup
...
* only initialize timesynch when timesynch is enabled
2009-03-31 13:25:50 +00:00
nvt-se
e90149b7b4
avoid switching mode when tx or rx is active.
...
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
2009-03-30 14:07:34 +00:00
fros4943
5f1fda0406
removed unused variables + writing serial data in timeevent
2009-03-26 16:23:47 +00:00
fros4943
dda6de8438
+ clock stub functions
2009-03-26 16:22:36 +00:00
fros4943
ac22ad5081
changed the Makefile rules for uploading to sky-nodes.
...
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
2009-03-26 13:29:44 +00:00
nvt-se
04bd414e1c
enabled LPP by default.
2009-03-26 12:51:55 +00:00
nvt-se
90b9b9bae3
configure LPP parameters with slightly longer listen time since the CC1020
...
driver switches from TX mode to RX mode rather slowly.
decreased CCA check timeout.
2009-03-26 12:47:12 +00:00
nvt-se
25cc327acc
avoid hanging in TX mode after CCA check failed.
...
minor memory savings.
2009-03-25 15:25:05 +00:00
nvt-se
96fbf3b853
use old style C comments.
...
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
2009-03-24 15:32:26 +00:00
nvt-se
15c447e57e
remove some unnecessary instructions and function calls. patch from Jesper Karlsson.
2009-03-24 15:13:11 +00:00
nvt-se
143c7f9cea
switched from serial to serial_line. patch from Jesper Karlsson.
2009-03-24 15:02:03 +00:00
fros4943
c76f34ff98
minor serial test application update
2009-03-21 15:47:40 +00:00
fros4943
9c9165dc90
start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations
2009-03-20 13:23:44 +00:00
nvt-se
6b22fa60e8
- avoid costly rx state initialization if the radio is already on.
...
- code formatting.
2009-03-19 14:43:31 +00:00
nvt-se
8f85355f02
print the MAC protocol name when starting the node
2009-03-19 14:14:06 +00:00
nvt-se
b9ef907690
enable serial line tools using the same commands as the sky platform's Makefile
2009-03-17 22:27:14 +00:00
nvt-se
7e329ab467
removed obsolete file.
2009-03-17 22:20:04 +00:00
adamdunkels
b1cd9c207a
Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include
2009-03-17 21:51:13 +00:00
adamdunkels
727c5a2dbe
Renamed serial module to serial-line
2009-03-17 20:32:22 +00:00
adamdunkels
b20f0884ed
Renamed serial module to serial-line
2009-03-17 20:19:11 +00:00
adamdunkels
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
nvt-se
7f3def31b7
removed duplicate inclusion of header, and sorted the entries.
2009-03-17 15:02:19 +00:00
nvt-se
6d0fc26ec1
disabled unstable SD driver.
2009-03-17 15:01:40 +00:00
fros4943
d6ebba536c
minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4
2009-03-13 14:40:07 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
dak664
932fc9f748
Remove tab that was preventing cgi invokation
2009-03-12 21:37:22 +00:00
adamdunkels
5920a86312
Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps
2009-03-12 19:15:23 +00:00
fros4943
99b9e80de9
make all quickstart target phony
2009-03-12 17:48:23 +00:00
fros4943
72fdf5b379
make quickstart goal precious
2009-03-12 15:12:50 +00:00
fros4943
063bf88f90
cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work
...
+
cygwin path fix for quickstart
2009-03-12 13:04:10 +00:00
nvt-se
80bbc92ffe
patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known
...
in the header.
2009-03-12 12:23:22 +00:00
fros4943
5d27841807
+ contiki app object
2009-03-11 08:40:37 +00:00
fros4943
bcb34297df
reimplemented quickstart functionality
2009-03-11 07:45:54 +00:00
fros4943
0bc10750bc
added rule for .cooja target.
...
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
2009-03-10 21:23:38 +00:00
julienabeille
0395ff5f39
sicslowpan Typo
2009-03-09 08:19:07 +00:00
c_oflynn
41c19115d2
fix compiling ravenusb platform
2009-03-06 15:21:45 +00:00
adamdunkels
3848bba210
Added support for serial data input
2009-03-06 00:13:56 +00:00
adamdunkels
8afff893f1
Removed old \mainpage documentation to avoid confusion with the main \mainpage
2009-03-02 22:04:14 +00:00
fros4943
3774395c82
cfs example updated
2009-03-02 09:44:07 +00:00
fros4943
286065b584
cfs updated
2009-03-02 09:34:47 +00:00
adamdunkels
e3043b1be2
Enable communication power accounting for xmac by default
2009-03-01 20:43:37 +00:00
adamdunkels
ac9ab9c582
#include lib/random.h
2009-03-01 20:42:10 +00:00
nvt-se
47d70f2ae3
Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.
2009-03-01 12:00:00 +00:00
nvt-se
b47221672a
switched cfs offset type to signed long to allow backward movements with cfs_seek.
2009-02-28 13:41:16 +00:00
fros4943
9c8c4898f7
updating cooja cfs stubs according to recent commits
2009-02-27 16:06:25 +00:00
nvt-se
9f8f773b43
use unsigned long as cfs offset type.
2009-02-27 14:53:15 +00:00
oliverschmidt
03e7eb2535
Fixed comment (just to make sure that committing still works after all these months).
2009-02-27 07:57:13 +00:00
nvt-se
9b548619ed
removed redundant definitions.
2009-02-25 23:57:13 +00:00
adamdunkels
d761dfebd1
Bugfix: reduced the size of the uIP buffer to account for MAC header space
2009-02-25 10:23:03 +00:00
nvt-se
c148e2e7ea
Do not include codeprop.h by default.
2009-02-23 14:44:26 +00:00
nifi
0db6403c5d
removed unnecessary reference to codeprop.h
2009-02-21 11:23:54 +00:00
adamdunkels
7781bbea58
Enabled X-MAC announcements by default, disabled polite broadcast announcements by default
2009-02-14 22:52:24 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
fros4943
f1fc4c879f
cfs_coffee_get_fd_set() was renamed
2009-02-09 10:09:13 +00:00
nvt-se
d0a546b049
A long refactoring session yielded the following.
...
Technical changes:
* Factored out file specific information from the file descriptor
structure into a new file structure.
- Useful file metadata can be stored after the file is closed.
- File descriptors become much smaller.
- Significantly reduces the need to scan for the file end.
* Use correct types in all function signatures.
* Removed the directory cache.
Results:
* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
2009-02-08 17:08:13 +00:00
adamdunkels
440899e4cb
Seed rand() with the node ID + MAC address
2009-02-07 16:49:36 +00:00
adamdunkels
5cf0c25ca6
A few more minor fixes
2009-02-04 20:58:05 +00:00
adamdunkels
96882c402a
Fixed conformance to Contiki code style :)
2009-02-04 20:55:41 +00:00
joxe
9689a579be
added DCO/CPU speed re-synch each 30 seconds
2009-02-04 19:32:20 +00:00
fros4943
c16921f108
checkpointing library implemented for the sky platform (cfs interface is currently not optimized)
2009-02-04 17:51:49 +00:00
zhitao
5789bf5596
Modified comments for receiver filter bandwidth settings
2009-02-02 08:52:49 +00:00
joxe
e5f0d786a8
fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted
2009-01-31 12:45:03 +00:00
fros4943
603740b13b
removed compiler warning by returning 0 at undefined value
2009-01-23 17:08:17 +00:00
fros4943
ebcaf8eec8
removed compilation warning due to unused is_gateway variable (outside uIP mode)
2009-01-19 13:44:04 +00:00
adamdunkels
e70b45c102
Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists
2009-01-15 22:12:46 +00:00
adamdunkels
29fe3d8741
Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board
2009-01-15 21:07:03 +00:00
adamdunkels
9f0006fde0
Driver for the acceleromenter sensors on the JCreate board
2009-01-15 21:06:02 +00:00
fros4943
5f3c1a0e12
elfloader executing loaded programs from ram (not rom) by default on msp430 platforms.
2009-01-15 09:04:04 +00:00
joxe
d2dc732435
changed list_pop to return removed element
2008-12-16 09:59:42 +00:00
c_oflynn
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
zhitao
a50d5b701e
direct the UART input stream to the default Contiki serial process
2008-12-09 15:56:39 +00:00
nvt-se
79d4d22ee7
replaced usage of 16-bit rimeaddr field.
2008-12-02 16:00:15 +00:00
fros4943
0ab57730f8
removed reference to the removed u16 rime address field
2008-12-01 13:20:51 +00:00
c_oflynn
9fb2c9d836
* Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
...
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
fros4943
6150d13254
support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson)
2008-11-28 16:41:26 +00:00
zhitao
6b33cf434f
bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead
2008-11-25 16:05:22 +00:00
joxe
55280131fc
added printout of MAC protocol name
2008-11-24 14:31:08 +00:00
fros4943
720357bc60
added log_message() implementation
2008-11-21 10:35:46 +00:00
c_oflynn
8bae6890a8
Changes by "David Kopf" <dak664@embarqmail.com> to:
...
-Add hit counter to index.html
-Adding link to favicon.png
-Fix serving of binary (image) files in avr-makefsdata file
Changes by Colin O'Flynn:
-Removed extra linebreak in tutorial-raven.txt
-Fix to contiki-conf.h in avr-rcb platform
2008-11-18 22:03:12 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
oliverschmidt
7ac49a573b
Reverted recent change as there's now a general (and actually working) solution in Makefile.include.
2008-11-17 22:40:10 +00:00
nvt-se
98a42524d3
minor formatting changes
2008-11-17 16:18:52 +00:00
zhitao
0be308b7ce
changed RSSI samples count to maximum (=16)
2008-11-17 16:14:09 +00:00
c_oflynn
42dd7c37fc
Changed timeout to 1 second on fragmentation
2008-11-16 16:07:13 +00:00
oliverschmidt
a844636218
Minor docu update.
2008-11-13 20:26:27 +00:00
c_oflynn
699c493866
forgot these files for RCB...
2008-11-13 15:07:52 +00:00
zhitao
29b0d010d5
added #define for platform check
2008-11-13 14:25:47 +00:00
nvt-se
90691eb6a2
crc calculation contributed by Carlo Alberto Buano + some refactoring.
2008-11-11 12:24:43 +00:00
oliverschmidt
d08a218a7a
Minor formatting change.
2008-11-10 22:52:43 +00:00
oliverschmidt
24f04a57b2
Include wget shell command in "standard" shell environments.
2008-11-10 22:23:50 +00:00
oliverschmidt
c109e102c4
Include wget shell command in "standard" shell environments.
2008-11-10 22:10:32 +00:00
nvt-se
1a6c909736
added sd_write declaration.
2008-11-10 14:32:49 +00:00
adamdunkels
34e2734cd9
Use the uip-over-mesh network gateway functionality
2008-11-09 12:30:32 +00:00
adamdunkels
83155d48f9
Moved the network gateway logic to the uip-over-mesh module.
2008-11-09 12:22:04 +00:00
c_oflynn
b6e76a4947
Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface
2008-11-08 17:11:18 +00:00
c_oflynn
f13ec95efa
*** empty log message ***
2008-11-08 03:29:15 +00:00
nvt-se
0c4f7bed8f
temporary fix to get sicslowpan.c working on the Sky platform:
...
conventional MAC implementations require a call to the MAC driver's
read function.
2008-11-06 20:45:06 +00:00
nvt-se
21e4b4be80
map rime address to mac address for ipv6
2008-11-06 15:14:24 +00:00
nvt-se
c5d9795f92
added initialization for uip6
2008-11-05 15:34:04 +00:00
nvt-se
d1d09ea1fd
added IPV6 configuration.
2008-11-05 14:31:06 +00:00
nvt-se
7ac98ee257
added missing watchdog_periodic
2008-11-04 15:46:59 +00:00
adamdunkels
1d56451d11
Changed the default IP address to match the default setting in tapdev
2008-10-31 18:11:44 +00:00
oliverschmidt
072830d4f2
Migrated project files from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). Almost all changes were required because VC++ 2008 does a parallel build. Therefore all intermediate files need to have unique names. This wasn't the case by default because VC++ doesn't presume seperate projects to build into the same directory - as it is the case with all the *.prg and *.dsc files of Contiki.
2008-10-29 15:03:34 +00:00
oliverschmidt
ebcafc68c8
Migrated solution file from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition).
2008-10-29 14:59:35 +00:00
joxe
bc39f2a86c
added get_rssi_packet for getting RSSI from the last packet received
2008-10-29 09:22:39 +00:00
fros4943
641c48ee00
not limiting random seed to 99
2008-10-28 15:37:34 +00:00
nvt-se
4829ffea50
removed supererogatory file
2008-10-28 14:07:32 +00:00
nvt-se
59012007b9
added an SD example application
2008-10-28 12:56:57 +00:00
nvt-se
1fdb3c21f0
fixed problems with uart and sd cards.
2008-10-28 12:42:53 +00:00
c_oflynn
f301f9d118
Changed copyright.
2008-10-15 15:59:38 +00:00
mvidales
2e2eb8d387
changed stabs to dwarf-2 for debugging.
2008-10-15 15:42:18 +00:00
c_oflynn
1375511179
Fix to allow building without LCD interface
2008-10-15 14:38:20 +00:00
mdurvy
acfe78a51a
last version of the raven lcd user interface
2008-10-15 13:13:49 +00:00
adamdunkels
3428e17cea
Changed the \mainpage doxygen tag to avoid confusion with the main Contiki \mainpage
2008-10-15 12:37:59 +00:00
adamdunkels
ba43d94ef7
Define IPv6 options only if UIP_CONF_IPV6 is defined (which should be defined by the Makefile.include if IPv6 is enabled)
2008-10-15 09:14:25 +00:00
c_oflynn
1c5a27f693
Moved raven-lcd.h file
2008-10-14 22:05:09 +00:00
c_oflynn
6e42bd3496
example\webserver-ipv6-raven works!
2008-10-14 21:29:23 +00:00
c_oflynn
d5865cb2b6
-Change needed for ravenusb to build
...
-Reverts Makefile.include back to 1.57, then apply the needed change
2008-10-14 20:31:46 +00:00
c_oflynn
a520fe4646
Lots of changes / commits! This allows ravenusbstick example to build at least.
2008-10-14 19:06:51 +00:00
julienabeille
2238f2e7da
Debugged autoconf for ethernet
2008-10-14 16:50:11 +00:00
julienabeille
08465a6c19
new-ipv6 compiles on native cygwin
2008-10-14 14:00:58 +00:00
julienabeille
4f9bc05f90
ping-ipv6 example compiles on native cygwin
2008-10-14 13:39:12 +00:00
julienabeille
9b2961046a
Modifs to minimal-net for IPv6 support
2008-10-14 10:06:26 +00:00
adamdunkels
0a961b2ada
Contiki port for the Atmel AVR Raven board
2008-10-14 09:40:30 +00:00
nvt-se
aff141f56e
reduced default sizes
2008-10-09 14:56:53 +00:00
fros4943
115a2b0782
renaming printf/putchar/puts symbols to avoid jni library loading overriding our custom implementations
...
experimental: directly references objcopy (tested on win32+linux)
2008-10-05 15:43:09 +00:00
fros4943
d79b1d55f7
not implementing putc(..FILE*) function, only stdout
2008-10-05 15:40:27 +00:00
nvt-se
10639bc982
use abstract types for offsets and pages so that we can easily port it to
...
very large or small memories.
2008-10-03 19:27:28 +00:00
fros4943
4cc56a741d
printf implementation towards cooja
2008-10-03 09:41:16 +00:00
fros4943
08502eb344
removed refences to printf2log.h
2008-10-03 09:39:38 +00:00
fros4943
2fb6410e4d
removed old printf output conversion method, instead implementing putchar() and printf()
2008-10-03 09:37:32 +00:00
joxe
1a1ddd0bd5
removed energest-arch from sky and esb platforms
2008-09-29 12:38:18 +00:00
nvt-se
9c3f5beec7
added a small guide.
2008-09-26 18:14:12 +00:00
nvt-se
37fa4da899
support 9600 baud
2008-09-19 12:18:04 +00:00
joxe
5b1c229754
fixed battery sensor for sky platform
2008-09-18 21:29:06 +00:00
joxe
5d860b1df2
changed sleep to go into LPM3
2008-09-18 17:58:21 +00:00
joxe
8aa8e26c54
removed redundant sensor initialization, added comment
2008-09-14 20:47:30 +00:00
adamdunkels
0f82635dc9
Bugfix: avoid overflowing the event queue
2008-08-15 19:54:58 +00:00
adamdunkels
35d85897b9
Minor bugfix: the printf() must include the n
2008-08-15 19:34:07 +00:00
nvt-se
deefb97c16
Changed clock value so it is a power of two.
2008-08-14 11:11:34 +00:00
matsutsuka
6c9291f38b
Removed dependency of Cygwin from hexameter.
2008-07-20 07:44:39 +00:00
oliverschmidt
f822ac9797
Added clock_seconds() implementation.
2008-07-12 14:44:37 +00:00
nvt-se
2b68f88e77
moved platform independent definitions
2008-07-11 21:39:26 +00:00
nvt-se
e757cae8ea
removed obsolete definition
2008-07-11 21:36:45 +00:00
nvt-se
e8a85b3726
moved platform independent code to the right place
2008-07-11 21:35:10 +00:00
nifi
9952ee8f26
Ported Coffee to the ESB platform
2008-07-11 15:27:57 +00:00
adamdunkels
b18b84bb0e
Added clock_seconds implementation to minimal-net port
2008-07-10 17:10:39 +00:00
adamdunkels
a8f2e8ca48
Added clock_seconds implementation to win32 port
2008-07-10 17:08:54 +00:00
adamdunkels
6bfe18bce1
Changed startup message
2008-07-09 20:58:25 +00:00
nifi
0d87322a18
minor documentation update and removed unused function prototypes
2008-07-09 20:45:06 +00:00
adamdunkels
710f9cf54b
Removed debug printout
2008-07-09 09:37:50 +00:00
adamdunkels
2023a692d4
Added clock_second() implementation to make th shell work
2008-07-09 09:34:29 +00:00
nifi
f93f501a4d
updated tr1001_send and tr1001_read to match radio driver api
2008-07-08 13:22:31 +00:00
nifi
8718c41945
Fixed compiler warning.
2008-07-08 12:35:05 +00:00
nifi
8db3671d65
- Replaced TR1001 statistics with rimestats
...
- Fixed typo in constant name
- Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
2008-07-08 12:27:22 +00:00
nifi
6e657ad3d8
Moved old Makefile from platform/esb to backyard/platform/esb
2008-07-08 11:21:51 +00:00
nifi
16f7888b52
changed clock resolution to 64 (needs to be a power of 2) and updated uIP settings
2008-07-08 09:36:48 +00:00
adamdunkels
8e5d255b5b
Moved initialization of the SHT11 until after other initialization: this seems to fix a bug where the SHT11 temperature and humidity values started varying wildly.
2008-07-08 08:23:24 +00:00
adamdunkels
84e4bf7a15
Changed order of initialization to make light sensors work again: a previous change to irq.c seems to have conflicted with light sensor initialization
2008-07-07 23:44:58 +00:00
oliverschmidt
9ac4123f00
Adjusted VC++ project file to recent change regarding cfs implementation (and added preprocessor define _CRT_NONSTDC_NO_DEPRECATE).
2008-07-06 11:06:14 +00:00
oliverschmidt
9d5ae4864e
Added preprocessor define _CRT_NONSTDC_NO_DEPRECATE to allow usage of open(), close(), read(), write() and lseek().
2008-07-06 11:04:33 +00:00
oliverschmidt
c60e91bf59
Moved Win32 cfs directory functions from cfs-win32.c to cfs-win32-dir.c.
2008-07-06 10:24:38 +00:00
oliverschmidt
bf3c92e98c
Leverage split of cfs-posix and cfs-posix-dir by reusing cfs-posix for win32 and replacing only cfs-posix-dir with cfs-win32-dir.
2008-07-06 08:29:37 +00:00
oliverschmidt
86bd7e9829
Added lseek dummy.
2008-07-06 07:34:34 +00:00
oliverschmidt
fa956117f7
Dummies should rather return errors.
2008-07-06 07:32:20 +00:00
oliverschmidt
c00de08dec
Added lseek dummy.
2008-07-06 07:28:42 +00:00
nvt-se
133a314b1c
energest.h moved to sys/
2008-07-04 02:58:58 +00:00
adamdunkels
64b6663b11
moved energest from lib/ to sys/
2008-07-03 23:59:20 +00:00
adamdunkels
c6579d4f08
CFS Coffee arch file for the native platform
2008-07-03 23:13:55 +00:00
adamdunkels
51f4ab8b2c
Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long
2008-07-03 23:12:10 +00:00
adamdunkels
84a42a0bb3
xmem implementation for the native platform
2008-07-03 23:11:27 +00:00
matsutsuka
28bcff539f
path misconfiguration has been fixed
2008-07-02 15:04:07 +00:00
matsutsuka
4cf1687845
shell is removed temporarily since it doesn't work in the current version.
2008-07-02 15:03:44 +00:00
adamdunkels
28331191b3
Changed name of simple-cc2420 to cc2420
2008-07-02 09:38:06 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
dafa1d89a2
Added cc2420-aes.c (functions for interfacing the build-in AES support of the CC2420)
2008-07-02 08:47:05 +00:00
matsutsuka
4ecebdd842
A binary conversion tool has been modified to support variations.
2008-07-02 07:17:14 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
oliverschmidt
c2bec97eef
Added some info on the Apple2 PFS (and AppleCommander).
2008-06-12 22:45:17 +00:00
oliverschmidt
433518c3cb
Just some minor reformatting.
2008-06-12 22:16:50 +00:00
nvt-se
f83000af8a
clear bit when uart edge is set.
2008-05-29 22:06:18 +00:00
nvt-se
36fec8dd01
moved sdspi.c to the sd file list.
2008-05-29 22:04:30 +00:00
adamdunkels
d134a1fcb1
Moved sky-specific make targets from the tools/sky/Makefile to the more natural platform/sky/Makefile.sky. Added a number of convenient targets for accessing the serial port.
2008-05-29 20:15:49 +00:00
nvt-se
44c93fcd93
cleared lock semantics
2008-05-28 13:17:08 +00:00
adamdunkels
7ca33e2285
Reverted inadvertedly committed change to lpp instead of nullmac
2008-05-27 19:07:20 +00:00
nvt-se
fed62e1642
added timeout
2008-05-27 14:22:55 +00:00
nvt-se
07f8875963
added missing header
2008-05-27 14:05:09 +00:00
nvt-se
f2c6f77f7d
removed debug print
2008-05-27 14:04:15 +00:00
adamdunkels
1263eb8455
Moved old unused files to backyard
2008-05-27 13:16:34 +00:00
nvt-se
ce84dce702
reset locks on forced mode switch
2008-05-27 13:05:52 +00:00
nvt-se
9c9c2573c3
lock UART for RS232 in putchar
2008-05-27 13:03:19 +00:00
nvt-se
bff587e32c
lock SPI bus when erasing
2008-05-27 13:01:27 +00:00
nvt-se
a26bcf30f7
added SPI parameters.
2008-05-27 12:25:48 +00:00
oliverschmidt
2ede893aa6
The feature set of gnumake is really frightening: This time I discovered 'target-specific variable values'...
2008-05-26 11:26:57 +00:00
oliverschmidt
f74503c23c
Replace non-fully-functional hack with the new gnumake variable CONTIKI_PROJECT.
2008-05-26 10:13:32 +00:00
oliverschmidt
356f5cfa04
The recent optimizations (usage of language card bank2 through new C-library, logging through ROM routine, removal of unused IP forwarding code) allowed to increase the number of concurrent HTTP conntections from 3 to 7 :-)
2008-05-23 23:13:41 +00:00
oliverschmidt
a78a7dedbc
Added make target 'disk' for creating a .dsk disk image using AppleCommander.
2008-05-22 22:21:43 +00:00
oliverschmidt
7120cf4404
Added make target 'disk' for creating a .d71 disk image using c1541.
2008-05-22 22:19:30 +00:00
oliverschmidt
dc63b33956
Added make target 'disk' for creating a .d64 disk image using c1541.
2008-05-22 22:18:25 +00:00
oliverschmidt
cd1608aa08
Activate uIP forwarding support.
2008-05-22 19:49:48 +00:00
oliverschmidt
e914302e94
Removed check already done in Makefile.include.
2008-05-22 19:45:47 +00:00
oliverschmidt
b750e8cc42
Moved platform/c64/contiki.cfg to tools/c64/sample.cfg
2008-05-21 08:13:04 +00:00
oliverschmidt
5dba39fab1
Moved platform/c128/contiki.cfg to tools/c128/sample.cfg
2008-05-21 08:09:46 +00:00
oliverschmidt
a341f981aa
Moved platform/apple2enh/contiki.cfg to tools/apple2enh/sample.cfg
2008-05-21 07:59:43 +00:00
adamdunkels
8b4179cf45
Moved ctimer_init() so that MAC protocols can use ctimers in their initialization code
2008-05-19 12:07:49 +00:00
adamdunkels
7aa8508e0b
Added display of radio status: a green ring appears around nodes with their radio turned on. Added a command that prints out a .fig file that shows the current network setup (press the 'd' key).
2008-05-14 19:22:57 +00:00
adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
nvt-se
776f377a69
Configuration for the Sky platform.
2008-04-28 10:34:33 +00:00
joxe
7be3aeeeb5
added sampling mode in sound sensor
2008-04-25 15:55:37 +00:00
fros4943
c4df31376e
cooja hello world (+ include printf2log.h)
2008-04-22 13:07:49 +00:00
nvt-se
73978e3133
only include sdspi.h if WITH_SDC is on.
2008-03-31 14:33:23 +00:00
nvt-se
acf01a0c58
fixed compilation error.
2008-03-31 14:32:00 +00:00
nifi
f916c7b130
initialize ctimer after initialization of process
2008-03-31 14:01:26 +00:00
nvt-se
067e4c3c06
include contiki-conf.h for type definitions.
2008-03-31 13:48:03 +00:00
nvt-se
f7b3d9fc99
moved files to sd/
2008-03-31 13:45:52 +00:00
nvt-se
fdcc145150
added missing file.
2008-03-31 13:43:34 +00:00
nvt-se
2822ff7ddb
made more conform with contiki indentation.
2008-03-28 23:03:05 +00:00
nvt-se
10cabda581
lock wait function from Michael Baar.
2008-03-28 16:06:28 +00:00
nvt-se
bd8809d35d
print information about the SD card, if existent.
2008-03-28 16:02:01 +00:00
nvt-se
6486460e3f
locking bugfix from Michael Baar.
2008-03-28 15:59:58 +00:00
nvt-se
3fec8ee5e7
synced with newer version by Michael Baar.
2008-03-28 15:58:43 +00:00
nvt-se
d5c8b18fc2
added accelerometer test with moving average.
2008-03-27 13:08:35 +00:00
nvt-se
5631c92416
use three different input channels for the accelerometer.
2008-03-27 13:04:59 +00:00
oliverschmidt
85edbc01db
Starting with the cc65-snapshot-2.11.9.20080316 the Apple2 C-library supports placing code in the Apple2 Language Card by choosing the code segment 'HIGHCODE'. By default the memory area 0xD400 - 0xE000 is used for HIGHCODE. If the application doesn't need the ProDOS 8 QUIT code then the memory area used for HIGHCODE may be extended to 0xD000 - 0xE000.
...
Contiki now leverages that feature to place process.o, etimer.o and uip_arp.o in HIGHCODE. These files were carefully chosen as:
- they are necessary for all Ethernet apps
- their size doesn't depend on configuration macros
- they fill the available space nicely (with a little reserve for changes in the source or the compiler)
2008-03-24 22:49:00 +00:00
fros4943
b5d09f3822
set default radio channel: 26
...
same as sky platform
2008-03-18 16:22:00 +00:00
fros4943
660bc5e991
changed ss values + added configurable csma mac
2008-03-17 09:48:00 +00:00
nifi
ddcda4582e
ctimer initialized by contiki-esb-main
2008-03-13 15:59:43 +00:00
nifi
3ecd955f01
energest needs to be initialized before network
2008-03-13 15:58:44 +00:00
nifi
79cb912f7c
reduced memory usage, removed procinit, general cleanup of initialization, enabled watchdog
2008-03-07 17:54:22 +00:00
oliverschmidt
9071007e1e
For the Win32 platform build we need to define AUTOSTART_ENABLE even for the Contiki library files to be able to autostart the program handler.
...
Note: For this to work the program handler needs to be the first autostart enabled application in the Contiki library. As the GNU archiver guarantees to preserve the order of the object files in a library this can be accomplished by having the program handler the first item in APPS.
2008-03-04 22:55:54 +00:00
adamdunkels
c38d43c387
Change order of initialization so that Rime is initialized before uIP-over-Rime. Send out a new gateway command if a spurious (erroneous) gateway command is received. (Note for the future: this will cause a ping-pong problem with two correct gateways in the network; need to come up with a better solution for this.)
2008-03-03 20:23:53 +00:00
adamdunkels
136443a387
Print out interface address
2008-03-03 20:21:59 +00:00
oliverschmidt
8a4890c9e5
Free up unused file descriptors.
2008-02-28 21:56:47 +00:00
oliverschmidt
368d389970
Free up unused file descriptors.
2008-02-28 21:36:37 +00:00
nvt-se
1d3bae48dd
added sd card support.
2008-02-28 15:49:01 +00:00
nvt-se
2cc0135e35
cleaned up and fixed an error checking problem in the locking code.
2008-02-28 15:11:22 +00:00
fros4943
3b5fa2d8e5
added 5 second delay before actually burning the node id (may otherwise cause problems with the .upload script)
2008-02-25 16:34:56 +00:00
adamdunkels
412facb831
This is an initial commit of an implementation of the Chameleon
...
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.
The details are in our SenSys 2007 paper:
Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.
http://www.sics.se/~adam/dunkels07adaptive.pdf
This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
adamdunkels
9c57e5e272
Moved old Makefile (non-working) from platform/sky to backyard/platform/sky
2008-02-24 22:22:17 +00:00
adamdunkels
307fc41646
Detect if node is attached to a SLIP line to set node to become the network's gateway
2008-02-24 21:13:03 +00:00
adamdunkels
5bcd0ab60b
Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol
2008-02-24 21:11:35 +00:00
oliverschmidt
d74fd06536
Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file and setting the mouse sprite in order to preserve the existing logic.
2008-02-17 14:12:52 +00:00
oliverschmidt
93789de9dd
Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file in order to preserve the existing logic.
2008-02-17 14:11:48 +00:00
oliverschmidt
df441f50a3
Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE.
2008-02-15 16:51:06 +00:00
nvt-se
a06b85f74b
adjusted uIP parameters.
2008-02-13 15:41:04 +00:00
fros4943
27ac84d009
simlog function declaration
2008-02-11 18:45:18 +00:00
fros4943
4c56fce697
updated cfs_write arguments
2008-02-11 18:40:16 +00:00
adamdunkels
6740d95bfa
Initialize serial line with 115200 bps for SLIP
2008-02-11 10:44:12 +00:00
adamdunkels
fbcf9b6fcf
Disable watchdog while burning node ID
2008-02-11 10:43:47 +00:00
adamdunkels
8058a49d21
Code style fix
2008-02-11 10:43:31 +00:00
oliverschmidt
b252bb9fc9
Removed finally unnecessary cast (and reverted unintentionally commited change).
2008-02-10 22:52:41 +00:00
oliverschmidt
2632f8f937
Removed finally unnecessary cast.
2008-02-10 22:36:36 +00:00
oliverschmidt
0e96534ca8
Now that process initialization has been changed (back) to synchronous it needs to be called after adding program handler menu items in order to preserve the the existing program handler logic.
2008-02-10 19:14:48 +00:00
oliverschmidt
8823dfe250
Adjusted to the new shell.
2008-02-10 12:13:06 +00:00
oliverschmidt
2b1abd87af
Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE (and use it now in the platform build to start the program handler).
2008-02-10 11:29:24 +00:00
oliverschmidt
034bc4ec66
Adjusted to the new shell.
2008-02-09 18:56:26 +00:00
oliverschmidt
614fa668cd
Removed SELFSTART_PROCESS as AUTOSTART_ENABLE generally serves that purpose - and AUTOSTART_ENABLE gets already set as required :-)
2008-02-08 22:48:28 +00:00
oliverschmidt
0655839603
Removed superfluous semicolon.
2008-02-08 12:14:52 +00:00
oliverschmidt
fe6a55d1a4
Accomodate for the now more complex shell output.
2008-02-07 23:06:03 +00:00
oliverschmidt
806f79bb03
Replaced (now obsolete) PROCESS_LOADABLE with SELFSTART_PROCESS.
2008-02-07 16:34:18 +00:00
oliverschmidt
155a27ff59
Switched from (now obsolete) 'process_load' to 'autostart_processes'.
2008-02-07 15:53:43 +00:00
oliverschmidt
a105e1a40c
Added 'const'.
2008-02-06 16:41:19 +00:00
adamdunkels
cb6bc45350
Added code for routing IP packets over low-power radios using the Rime mesh module
2008-02-03 21:03:19 +00:00
adamdunkels
dc43a9713d
Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader
2008-02-03 21:01:36 +00:00
adamdunkels
f5b08ff115
Added a crude hack for drawing lines between nodes
2008-02-03 20:49:50 +00:00
adamdunkels
28a3a51f82
Added uIP ICMP destimation unreachable message generation
2008-01-24 23:09:40 +00:00
adamdunkels
68523814c5
Moved from examples/sky into generic platform/sky/apps so that all examples can use it
2008-01-23 20:34:37 +00:00
adamdunkels
c2ef303c24
Updated for the new simple_cc2420 API
2008-01-23 14:58:01 +00:00
nvt-se
6005437b27
Disable the watchdog during the whole erase operation.
2008-01-21 10:40:26 +00:00
nvt-se
bed0963769
Call watchdog_periodic before erasing each sector, because this operation
...
takes approximately 1s.
2008-01-21 10:28:44 +00:00
adamdunkels
685de41feb
Fixed buggy build
2008-01-19 06:57:44 +00:00
nifi
3e0e3d4965
added energest-arch.c
2008-01-18 18:26:02 +00:00
adamdunkels
34bd11905c
Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer
2008-01-14 14:50:01 +00:00
adamdunkels
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
adamdunkels
7a356d0fb5
Added support for (simulated) serial data input. Data written to netsim's standard input are now sent as serial data to the main node.
2008-01-14 09:38:16 +00:00
fros4943
4c131d6975
added max printf2log message size
2008-01-11 15:37:38 +00:00
adamdunkels
0cb1efe718
Added cfs-posix
2008-01-08 14:27:28 +00:00
adamdunkels
f935be10c9
Added initalization of the serial library. Changed LPM3 to LPM2 since the current serial driver does not work with LPM3 yet (we need to add start edge detection interrupt support to fix that).
2008-01-08 08:21:03 +00:00
adamdunkels
690805ebe7
Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL
2008-01-08 08:19:56 +00:00
adamdunkels
959c4f3ee2
Removed ENERGEST_CONF_ON which is present in contiki-conf.h anyway
2008-01-08 08:18:00 +00:00
adamdunkels
bd9230b4b3
Added serial input from stdin, removed uIP initialization since uIP is not used anyway, made stdout unbuffered
2008-01-08 08:08:57 +00:00
adamdunkels
b7ab95499f
Added serial and cfs-posix-dir
2008-01-08 08:08:05 +00:00
oliverschmidt
26a554e7c2
Added C128 port. It runs the example webserver both in the cgi and cfs variant - although the latter only with a reduced MTU size due to memory constraints.
2008-01-05 22:30:23 +00:00
oliverschmidt
a9a1a00f27
Moved GTK port to the backyard as it doesn't work for quite some time by now.
2008-01-05 21:06:38 +00:00
oliverschmidt
00d75c8d16
Made use of uip_ipaddr_to_quad().
2008-01-04 23:28:33 +00:00
oliverschmidt
74fc3b4576
Made netsim gateway ip addr on Windows/Cygwin configurable at the command line.
2008-01-04 23:23:29 +00:00
oliverschmidt
5bff4631e4
Minor reformatting.
2008-01-04 23:09:03 +00:00
oliverschmidt
f75d01a428
Log ip addr in the ordinary way.
2008-01-04 22:21:04 +00:00
oliverschmidt
b96c9deebc
Added "usual" comments.
2008-01-04 21:53:32 +00:00
oliverschmidt
bb19396d21
Introduced yet another high-level config macro.
2008-01-01 19:47:03 +00:00
oliverschmidt
852d2c0283
Introduced very lightweight pfs implementation based on Apple ProDOS.
...
ProDOS requires for each opened file a user-supplied page-aligned 1024 byte i/o buffer. This makes the generic POSIX file i/o library contained in the cc65 C-library quite heavyweight.
In contrast the lightweight pfs implementation uses the uIP packet buffer as ProDOS i/o buffer. Therefore:
- Only one file may be open at any time.
- That file may not be open while the uIP packet buffer is used by uIP. The open()/read()/close() sequence should be completed before Contiki event scheduling or inside handling a single Contiki event.
- The uIP packet buffer must be large enough to hold the ProDOS I/O buffer. Depending on the position of the uIP buffer in memory this means between 1024 and 1024 + 256 bytes. Therefore in an Ethernet environment setting the MTU_SIZE to at least 1266 is safe (So the default of 1500 is just fine).
2008-01-01 18:49:50 +00:00
oliverschmidt
69faf1ff4d
Set sprite color.
2007-12-24 15:01:49 +00:00
oliverschmidt
5592b1df6c
Implement cfs API on preprocessor level using POSIX functions..
2007-12-23 15:29:19 +00:00
oliverschmidt
fda38428d9
Introduced some more high-level config macros.
2007-12-23 13:55:38 +00:00
oliverschmidt
14a8cf7200
Made use of the new high-level config macros.
2007-12-23 12:33:57 +00:00
oliverschmidt
125f261b7d
Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios.
2007-12-23 12:32:43 +00:00
oliverschmidt
0564cc50fd
Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all.
2007-12-21 01:36:01 +00:00
oliverschmidt
fe023c6d3e
Introduced very lightweight log implementation not depending on any file I/O library.
2007-12-21 00:43:57 +00:00
oliverschmidt
c36697fca9
Added target-specifc mouse configuration values.
2007-12-20 22:59:41 +00:00
oliverschmidt
e63610e1c9
Added target-specifc mouse support (sprite handling).
2007-12-20 22:54:22 +00:00
oliverschmidt
ff6622310f
Added target-specifc mouse configuration values.
2007-12-20 22:52:18 +00:00
oliverschmidt
eab988e84d
Added target-specifc ctk (and www) configuration values.
2007-12-20 20:54:15 +00:00
nvt-se
f0891be218
added clear channel assessment timeout. long to begin with.
2007-12-20 14:44:31 +00:00
fros4943
d8f6f03edc
moving radio init to init-net files
2007-12-20 13:43:24 +00:00
fros4943
d0997c2dab
major bugfix: padding synch with zero
2007-12-20 13:36:59 +00:00
nvt-se
abb2731ed7
corrected comparison when bits don't need shifting.
2007-12-20 10:48:01 +00:00
nvt-se
7a6a9e62e4
improved logic.
2007-12-19 13:25:41 +00:00
nvt-se
1f00c20815
state variable must be volatile.
2007-12-19 13:09:01 +00:00
oliverschmidt
70fe24817e
Added target-specifc ctk (and www) configuration values.
2007-12-18 17:51:20 +00:00
nvt-se
b4a8641dda
removed printf's.
2007-12-18 15:27:43 +00:00
nvt-se
f9d24f0d24
Wake up from sleep in the interrupt when the receiver process is going
...
to be polled.
2007-12-18 15:26:25 +00:00
fros4943
d21572da02
configurable port
2007-12-18 11:55:01 +00:00
nvt-se
ab115e4b10
Removed deprecated function.
2007-12-17 20:18:29 +00:00
nvt-se
1566f55e04
use smaller payload buffer size and provision for synchronization word in
...
the total buffer.
2007-12-17 20:15:53 +00:00
nvt-se
bcefffb0e7
set ev to valid value.
2007-12-17 18:48:50 +00:00
nvt-se
692da8fd47
swapped the currents for lpm and cpu.
2007-12-17 18:47:17 +00:00
nvt-se
004143b6b8
set rxlen to zero before enabling interrupts.
2007-12-17 16:37:15 +00:00
nvt-se
2288cdecbb
small cleanup.
2007-12-17 16:23:32 +00:00
nvt-se
2d5f331b34
new line.
2007-12-17 16:20:34 +00:00
fros4943
479d74ce6a
added receiver process outside interrupt
2007-12-17 15:53:57 +00:00
fros4943
7886d51045
removed old dma_init
2007-12-17 15:47:55 +00:00
fros4943
3936e0c275
updated version
2007-12-17 15:47:40 +00:00
nvt-se
5f1ca4ccdf
use synchronous transmission.
2007-12-17 15:26:47 +00:00
nvt-se
2a0351afb4
improved uip support and cleaned up the source.
2007-12-17 13:33:09 +00:00
nvt-se
86ce511469
Separate files for network initialization.
2007-12-17 13:20:54 +00:00
nifi
babb455dae
More explicit assignment of Rime address from node ID
2007-12-17 13:04:10 +00:00
adamdunkels
381f5dc4cc
Initialize Rime address from hardware MAC address if no node ID has been configured. Be more explicit on how Rime address is assigned from node ID. Set time synch authority level from Rime address rather than node ID. Fix bug that put CPU in LPM2 instead of LPM3.
2007-12-17 12:35:23 +00:00
nifi
f4ddc371e8
changed the way that rime address is set
2007-12-17 12:17:23 +00:00
fros4943
4da695ce72
bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise
2007-12-17 11:23:57 +00:00
nvt-se
6a42706847
removed duplicate.
2007-12-17 11:15:21 +00:00
nvt-se
a305e3ccbb
removed lpm_on.
2007-12-17 11:14:28 +00:00
fros4943
3969ea6f9d
not using usb port to program the msb
2007-12-17 11:10:45 +00:00
oliverschmidt
e991edc24d
Added route handling to the Cygwin build. It is done similiar to the other builds by simply shelling out to 'route'. However the coding isn't placed in the driver but in the netsim node main method - and it is fully parametrized.
...
Cygwin doesn't seem to call exit functions on SIGTERM so I needed to go for a signal handler in order to delete the route.
2007-12-17 01:12:09 +00:00
adamdunkels
2b4f33a4dd
Enabled support for CC2420 timestamps
2007-12-16 15:05:04 +00:00
adamdunkels
d13648292e
Added initialization of the time synchronization module
2007-12-16 15:03:35 +00:00
oliverschmidt
8644822a34
Soe we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities.
2007-12-16 13:08:09 +00:00
oliverschmidt
c7a24bf6cf
Soe we're finally bak at reducing the memory footprint be avoiding to pull in large C-library enitities.
2007-12-16 13:07:35 +00:00
oliverschmidt
805f3f87d3
Make the "empty" error_exit implementation the default to be optionally overridden.
2007-12-16 13:05:23 +00:00
oliverschmidt
7b3d0559b3
Minimal reformatting.
2007-12-15 23:02:16 +00:00
oliverschmidt
21e343dc2f
Don't depend on program handler for project builds.
2007-12-15 21:54:54 +00:00
oliverschmidt
0e8649e5ae
Don't override www defaults for project builds.
2007-12-15 21:39:06 +00:00
oliverschmidt
97b1c95005
Activate mouse support for fullscreen mode.
2007-12-15 21:30:56 +00:00
oliverschmidt
9765b76455
Fixed typos.
2007-12-15 20:12:28 +00:00
oliverschmidt
6fd3b0dbae
Removed CTK_CONF_HYPERLINK from shared code as its use is still unclear (and the implementation was incomplete anyway).
2007-12-15 11:34:59 +00:00
oliverschmidt
b32f0643ab
Moved stuff into sys subdir to clean up the apple2enh dir (and because the corresponding shared res. cpu stuff is in the sys dir as well).
2007-12-15 11:04:11 +00:00
oliverschmidt
b89a08be8b
Allow Cygwin based Win32 platform to be used for 'project builds' (in the sense of the Contiki 2.x build system) beside the exsisting 'platform build'.
2007-12-15 00:00:34 +00:00
oliverschmidt
3a3a98fc0f
Made pc-6001 behave as before.
2007-12-14 23:49:14 +00:00
oliverschmidt
4519240466
Made ethernut2 behave as before.
2007-12-14 23:45:56 +00:00
oliverschmidt
7ad283bfe1
Made ethernut1 behave as before.
2007-12-14 23:44:49 +00:00
oliverschmidt
e4e608bd1d
Made gtk behave as before.
2007-12-14 23:40:41 +00:00
fros4943
c028df7ecf
not using mempcy for ack crc
2007-12-13 16:57:31 +00:00
fros4943
afb1cb28d3
initializing rimeaddr from nodeid similar to sky platform (!= esb platform)
2007-12-13 16:11:22 +00:00
nvt-se
54bef4bea3
added back initializations that were missing in the previous commit.
2007-12-13 13:10:02 +00:00
nvt-se
665c58fd2a
Contributions from Michael Baar:
...
CC1020
o Turns off only after transmission has ended and not in between
o Using events for DMA takes too long. It should use a callback when
DMA finishes to turn off the transmit mode as early as possible.
Core/UART
o Added profiling and energest initialization
o Changed low-power mode from LPM1 to LPM3
2007-12-13 12:51:38 +00:00
nvt-se
b1d87bf0d3
Removed deprecated rules.
2007-12-13 11:29:12 +00:00
fros4943
0fc2178857
added queuebuf conf
2007-12-13 08:00:51 +00:00
nvt-se
486ea95b4f
Limited support for energy estimation.
2007-12-10 12:49:08 +00:00
oliverschmidt
70321f690f
Made error_exit() implementation target-specific.
2007-12-08 22:16:43 +00:00
oliverschmidt
fec41a0f44
Clarify that the driver support RR-Net only on RR as other carts tend to differ in clockport activation.
2007-12-08 21:07:34 +00:00
oliverschmidt
32ae3317a6
Several minor changes and reformatting.
2007-12-06 22:09:56 +00:00
oliverschmidt
88136ca271
Added ETH64.
2007-11-30 12:39:34 +00:00
oliverschmidt
026ba0801f
Added LANceGS.
2007-11-30 12:35:18 +00:00
adamdunkels
f9fdafd858
Removed unused vnc client
2007-11-29 07:56:46 +00:00
fros4943
3bfa34f4c3
removed the symbols dummy target
2007-11-29 04:57:04 +00:00
adamdunkels
b2f030897c
Removed unused file rom.c
2007-11-28 23:31:53 +00:00
adamdunkels
be300d6765
Removed inclusion of unused file cxmac.h
2007-11-28 23:28:35 +00:00
nifi
867f87d35a
removed local watchdog (conflicts with cpu/msp430/watchdog.c)
2007-11-28 22:04:56 +00:00
nifi
c40a2071f0
changed to use radio_sensor directly instead of a variable depending on interrupts
2007-11-28 21:28:03 +00:00
nifi
377ad07d77
return the last decoded value instead of the last value read during an interrupt
2007-11-28 21:26:35 +00:00
nifi
0b44c75e94
added compiler error when compiled without nodeid=<the ID of the node>
2007-11-28 19:53:09 +00:00
oliverschmidt
d6deb82df8
Fixed typo.
2007-11-28 17:57:52 +00:00
oliverschmidt
2bec16e07d
Added some info on the apple2enh plattform.
2007-11-28 17:55:43 +00:00
oliverschmidt
bb5c0b3c73
Added some info on the c64 plattform.
2007-11-28 17:55:11 +00:00
oliverschmidt
171c84a9d9
Added some info on the win32 platform.
2007-11-28 17:12:11 +00:00
adamdunkels
f21225eb1c
More reasonable current draw numbers + multiply by voltage
2007-11-28 17:06:55 +00:00
oliverschmidt
2e1b1acfaa
Now that there's a Cygwin based build there's no more need to drive people to use Visual Studio - if they aren't already experienced and want to use it.
2007-11-28 16:51:17 +00:00
oliverschmidt
75c49f8d7b
Added CTK_CONF_HYPERLINK in order to keep them ;-))
2007-11-28 16:41:35 +00:00
adamdunkels
8a6309aa45
Changed UIP_UDP -> UIP_CONF_UDP
2007-11-28 15:32:25 +00:00
adamdunkels
40d9045a2d
Moved energy estimation initialization before starting processes so that processes may turn things on and off without messing up the energy estimates
2007-11-28 14:45:22 +00:00
adamdunkels
d6c597cf0b
Added missing sys/select.h include
2007-11-28 14:16:12 +00:00
nvt-se
4a5ad23ff4
Make it compile on Linux. tz isn't used anyway.
2007-11-28 13:01:02 +00:00
adamdunkels
a725de0f79
Reimplemented waiting with select() instead of nanosleep(). Let's see if Linux compiles this code now...
2007-11-28 12:54:41 +00:00
matsutsuka
9f753bf737
network configuration has been modified for appropriate compilation
2007-11-28 10:11:55 +00:00
matsutsuka
16f9b124c4
a minor glitch (apps setting) has been fixed
2007-11-28 10:03:40 +00:00
matsutsuka
5318ab9e2e
Additional support for main files.
2007-11-28 09:44:27 +00:00
matsutsuka
825c793b92
Several configuration variables have been added to support loader and applications
2007-11-28 09:44:03 +00:00
matsutsuka
b00156d9b0
Makefiles are entirely reformed to make configuration easier.
2007-11-28 09:43:01 +00:00
matsutsuka
5682272b78
Platform specific loader, which is yet supported.
2007-11-28 09:41:41 +00:00
matsutsuka
04af453e72
Special version of web server that consumes less memory.
2007-11-28 09:40:13 +00:00
matsutsuka
2555d7fdf0
Added experimental logging support for debug.
2007-11-28 09:39:30 +00:00
matsutsuka
e1456c5522
Some changes have been applied to support various CTK configurations.
2007-11-28 09:38:21 +00:00
matsutsuka
5d1aaa4fe8
CTK has been changed.
2007-11-28 09:37:11 +00:00
matsutsuka
874217b5b7
initialization added
2007-11-28 06:15:19 +00:00
matsutsuka
c1f7c16f7d
Network client (simpletelnet)
2007-11-28 06:14:11 +00:00
oliverschmidt
bcfc99fa5b
Limit the maximum number of simultaneous connections to the cfs webserver to the maximum number of open files.
2007-11-28 00:00:29 +00:00
oliverschmidt
a91fe3ea98
Limit the maximum number of simultaneous connections to the cfs webserver to three because there's not enough memory left on the heap for more open files anyway - ProDOS 8 needs 1kB of page-aligned heap per open file :-(
2007-11-27 22:03:29 +00:00
oliverschmidt
963cc8b31e
Made use of config file read function.
2007-11-27 21:50:19 +00:00
oliverschmidt
0d8d5c7c5c
Added (default) binary config file.
2007-11-27 21:46:35 +00:00
nvt-se
34ebd14ec7
Removed usleep and moved the pseudo-random factor to nanosleep's argument.
2007-11-27 20:45:15 +00:00
adamdunkels
90c13c2603
Added time.h include to get nanosleep to compile
2007-11-27 20:32:08 +00:00
oliverschmidt
ef55496de0
Use common log implementation for cc65 targets.
2007-11-27 16:50:02 +00:00
oliverschmidt
380407ae5a
Reduced stacksize.
2007-11-27 12:24:03 +00:00
adamdunkels
4eae027dd3
Changed usleep() to nanosleep()
2007-11-26 23:28:33 +00:00
oliverschmidt
953212e297
Set the maximum number of simultaneous connections to the cfs webserver to the maximum number of uIP connections.
2007-11-26 21:52:26 +00:00
oliverschmidt
f779a8cdff
Set the maximum number of simultaneous connections to the cgi webserver to the maximum number of uIP connections.
2007-11-26 21:38:32 +00:00
nifi
cc51c0220b
changed NETWORKDRIVERS to shorter NETSTACK
2007-11-26 19:35:06 +00:00
nifi
fa5a20f948
added ctimer init + printout of the autostarted processes
2007-11-26 19:34:23 +00:00
fros4943
06ce414c56
updated bad file info
2007-11-25 22:48:35 +00:00
fros4943
d6f46bfcaa
minor fix for SYMBOLS
2007-11-25 22:47:43 +00:00
fros4943
8aac8cde97
removed unused old stuff
...
+ introduced COOJA definition
2007-11-25 22:47:18 +00:00
fros4943
014c6c82e1
moved test applications from platform root to separate directory
2007-11-25 22:45:56 +00:00
fros4943
6f862c4506
removed warnings
2007-11-25 22:45:04 +00:00
fros4943
4436819336
updated interface
2007-11-25 22:44:06 +00:00
oliverschmidt
9c5f62d361
Switched to lowercase file name and do consistently "first-log then operate".
2007-11-25 22:21:19 +00:00
oliverschmidt
0df5958e16
Do consistently "first-log then operate".
2007-11-25 22:19:49 +00:00
oliverschmidt
3027f98b80
Switched to lowercase file name to allow for successful driver loading from C64 DOS file system.
2007-11-25 22:16:59 +00:00
oliverschmidt
74c4e10f23
No reason to not just compile petsciiconv.c for all cc65 targets.
2007-11-25 21:43:55 +00:00
oliverschmidt
f302b5e731
Activated PETSCII support on the C64.
2007-11-25 17:12:45 +00:00
oliverschmidt
b26ff75aad
Added user feedback on Ethernet configuration.
2007-11-25 15:15:05 +00:00
oliverschmidt
20d395e9b6
Added user feedback on IP configuration.
2007-11-25 15:00:32 +00:00
oliverschmidt
45c836c289
Adjusted dummy return value to (new) cfs interface.
2007-11-24 21:29:07 +00:00
oliverschmidt
0eb7106bd2
Include dummy for posix function missing in cc65 C-library.
2007-11-24 13:02:27 +00:00
oliverschmidt
0ed29ca43f
Include dummies for posix functions missing in cc65 C-library.
2007-11-24 13:00:27 +00:00
oliverschmidt
e5f7fc8594
Made cfs implementation adhere to (new) cfs interface and streamlined implementation.
2007-11-22 12:03:54 +00:00
nifi
d16836d9bb
changed to show Contiki version, node id, and autostarted processes at startup
2007-11-21 16:41:44 +00:00
oliverschmidt
645be6acbc
Made use of the generic Ethernet driver for cc65 targets.
2007-11-20 22:24:03 +00:00
oliverschmidt
7c1cbd4ee2
Added speed detection user feedback and adjusted soft clock to ethernet polling.
2007-11-20 21:54:06 +00:00
oliverschmidt
8ebc56aad5
Shortened welcome message.
2007-11-20 21:24:25 +00:00
oliverschmidt
aa7dd83d5d
Made use of the generic Ethernet driver for cc65 targets.
2007-11-20 21:19:12 +00:00
adamdunkels
a1f11ff8e7
Removed includes for stuff that has been moved to the backyard. Added <stdint.h> include
2007-11-19 12:23:02 +00:00
adamdunkels
477d39ce5b
Fixed function prototypes to match radio API
2007-11-19 09:50:54 +00:00
oliverschmidt
1c0aa8a0e4
Source reformatting only.
2007-11-18 13:24:34 +00:00
nvt-se
46b6ce9193
Conform to the radio_driver interface.
2007-11-18 12:25:22 +00:00
adamdunkels
58d442ab2f
Removed buggy button.c that is and should not be used
2007-11-18 12:02:49 +00:00
oliverschmidt
12c6074a75
Moved logically empty files to backyard.
2007-11-18 02:39:10 +00:00
oliverschmidt
c1e1249bc2
Removed compiler warnings.
2007-11-18 02:36:07 +00:00
oliverschmidt
6ab83029c3
Source reformatting only.
2007-11-18 02:17:33 +00:00
oliverschmidt
86a745f923
Removed compiler warnings.
2007-11-18 02:16:57 +00:00
oliverschmidt
d11e1e6fd2
Removed reference to logically empty file.
2007-11-18 01:13:56 +00:00
oliverschmidt
6d6edb418b
Declare strcasecmp here as it isn't part of C99.
2007-11-18 00:55:19 +00:00
oliverschmidt
f52ae57d99
Declare strcasecmp here as it isn't part of C99.
2007-11-18 00:46:26 +00:00
oliverschmidt
90edc773b0
Introduced C99 sized int types.
2007-11-17 22:40:33 +00:00
oliverschmidt
062e2a1ce4
Removed compiler warning.
2007-11-17 20:13:54 +00:00
adamdunkels
d6dc8763e9
Fixed dereference of void * pointer
2007-11-17 18:28:23 +00:00
adamdunkels
66b5644e07
Fixed compiler warnings to make code compile with gcc's -pedantic switch
2007-11-17 18:26:06 +00:00
adamdunkels
1e1e44a3f8
Fixed compiler warnings to make code compile with gcc's -pedantic switch
2007-11-17 18:01:00 +00:00
adamdunkels
d9eebf7e17
Fixed compiler warnings
2007-11-17 10:46:25 +00:00
adamdunkels
ff45f9d2c4
Added watchdog support
2007-11-17 10:29:33 +00:00
fros4943
79c38ef8df
minor updates in cooja cfs_ram
2007-11-16 09:21:49 +00:00
nifi
a6d827fa1f
moved initialization of ctimer to allow MAC layer to use ctimers
2007-11-15 13:07:42 +00:00
nvt-se
33e565d20a
Removed unused variables.
...
Initialize header.
2007-11-14 11:17:30 +00:00
adamdunkels
f1271464fd
Turned on energy estimation and profiling by default
2007-11-13 21:10:50 +00:00
adamdunkels
2140576ac9
Added battery-sensor.c
2007-11-13 20:37:18 +00:00
adamdunkels
d34f8e0dcc
Preliminary untested code for the internal MSP430 battery sensor
2007-11-13 20:29:07 +00:00
nvt-se
c90a758ac5
Detect if the medium is busy right before sending.
2007-11-12 21:17:47 +00:00
adamdunkels
b51977a693
Added Doxygen documentation
2007-11-10 20:45:29 +00:00
adamdunkels
ca6abb286b
Added LEDs notification. THe program won't compile without a nodeid=XXX now
2007-11-10 20:45:00 +00:00
adamdunkels
d5430dc4dc
Added better boot-up behaviour of the LEDs - they can now be used to determine where in the boot sequence the node hangs (if it hangs)
2007-11-10 20:44:30 +00:00
nvt-se
0e4429068b
Added a carrier sensing function.
2007-11-07 15:34:41 +00:00
nvt-se
ee59f1fe34
Use a fresh RSSI value in the read function.
2007-11-07 15:26:00 +00:00
nvt-se
a604013a88
Added more flags for the status register.
2007-11-07 15:23:35 +00:00
adamdunkels
0ce1708c76
#ifdef around RF_CHANNEL
2007-11-06 20:28:09 +00:00
nvt-se
366d845336
DMA destination is now given as a parameter instead of being hardwired.
2007-11-06 15:08:55 +00:00
nvt-se
dc8b6e7dcd
Removed some unused headers and definitions.
2007-11-06 14:48:18 +00:00
nvt-se
882f340f17
Use a counter for the test so lost packets are spotted easily.
2007-11-06 14:44:42 +00:00
joxe
1d447dc043
added button sensing and leds-blinking for better sensor demo
2007-10-26 12:37:48 +00:00
adamdunkels
dd8469ee4a
Added inclusion of Tmote Sky bulk upload makefile
2007-10-25 13:28:15 +00:00
adamdunkels
d2f90802de
Compile profiling support only if PROFILE_CONF_ON is defined
2007-10-25 10:21:48 +00:00
adamdunkels
a9e4287cbe
Changed the energy estimation type ENERGEST_TYPE_RECEIVE to ENERGEST_TYPE_LISTEN to highlight that energy is spent on idle listening, not just the actual reception of packets
2007-10-25 09:30:39 +00:00
zhitao
ff006a5103
keep in synch with the Rime abstraction
2007-10-25 08:26:49 +00:00
nvt-se
e7dc3ec422
Initialize ctimer.
2007-10-24 13:47:50 +00:00
adamdunkels
910c9ea161
Added profiling support, made rime/mac initialization nicer
2007-10-23 21:29:40 +00:00
fros4943
7512df3f7b
removed bad memcpy:s
2007-10-23 12:16:13 +00:00
nifi
217056b8bd
sht11 architecture support for Sky
2007-10-23 08:53:50 +00:00
fros4943
28ddccef19
added missing function declarations
2007-10-22 13:08:13 +00:00
nvt-se
e57310c0b3
Removed duplicated statement.
2007-10-22 13:07:00 +00:00
nvt-se
06f923e502
Simple test for the SHT11 driver.
2007-10-22 13:05:30 +00:00
nvt-se
91b79de654
Use sht11 driver.
2007-10-22 12:21:20 +00:00
nvt-se
045225fa05
Made driver less platform-dependent and added support for msb-430.
2007-10-22 12:19:58 +00:00
nvt-se
0c9db3caa3
Moved to core/dev.
2007-10-22 12:19:31 +00:00
nvt-se
406cc6d5a8
Set channel to RF_CHANNEL after simple_cc2420_init.
...
Otherwise the init function would reset the channel to 11.
2007-10-12 12:47:32 +00:00
nvt-se
2d0225b0e4
Safeguard for invalid packets.
2007-10-04 10:02:08 +00:00
nvt-se
fb9b800c53
More clear power down procedure. Now it is required that cc1020_on
...
is called before anyone can send after the power down.
2007-10-02 14:05:45 +00:00
nvt-se
4e8bdb1c08
Power managment is handled by another layer.
2007-10-01 11:59:36 +00:00
nvt-se
c0686e80f1
Added definitions for the MAIN register.
2007-10-01 11:56:49 +00:00
matsutsuka
d6ec25e37c
The libconio_arch-small is architecture-depend implementation of console I/O with minimum size for the server mode.
2007-09-30 12:46:34 +00:00
matsutsuka
c2472ff0f1
contiki-main file for network client support.
2007-09-29 04:13:14 +00:00
matsutsuka
4381f4b964
Platform-depend CTK support is modified to minimize size of module.
2007-09-29 04:10:00 +00:00
matsutsuka
9e1e31f3bb
Makefiles have been modified to support customized crt0.
2007-09-29 04:07:00 +00:00
matsutsuka
c3d13b6dd4
Configuration file now supports:
...
- telnet window size
- UIP configuration
- new rs232 driver
2007-09-29 04:05:20 +00:00
fros4943
87e32f037e
enabled config of entire ar command, not only arguments
2007-09-28 07:21:21 +00:00
nvt-se
b72c228379
* Enable rtimers.
...
* Specify port direction first.
2007-09-21 14:53:36 +00:00
nvt-se
24ffa8cfaf
support third DMA line.
2007-09-21 13:51:09 +00:00
nifi
9d75d6d153
enabled inline functions
2007-09-19 14:09:31 +00:00
matsutsuka
c99b7dc827
status has been added for polling function.
2007-09-19 12:47:19 +00:00
matsutsuka
8d7bb2119c
Architecture-depend CTK implmeentation has been all rewritten by assembler for performance and memory reasons.
2007-09-19 12:46:15 +00:00
matsutsuka
b2a6d163fc
configuration for serial has been changed.
2007-09-19 12:44:45 +00:00
nvt-se
bbecdd9c34
removed uncommented line.
2007-09-14 19:27:22 +00:00
nvt-se
87018b2af5
use uint16_t to be specific about id type size.
2007-09-14 19:24:45 +00:00
nvt-se
5e7a435959
do not declare msp430_cpu_init here.
2007-09-14 19:24:07 +00:00
nvt-se
6955e028da
Use splhigh and splx.
2007-09-14 19:20:54 +00:00
nvt-se
290f41db06
better comments.
...
enable interrupt later.
2007-09-14 19:20:24 +00:00
nvt-se
ca733ddfce
Added some statistics.
2007-09-14 19:14:54 +00:00
nvt-se
928c22eda1
Minor refactoring and improved compliance with the radio interface.
2007-09-14 18:51:51 +00:00
matsutsuka
71e5298d90
Process "kill" is properly implemented.
2007-09-11 12:55:57 +00:00
matsutsuka
661476ad92
PC-6001mkII setting is added.
2007-09-11 12:55:35 +00:00
matsutsuka
809b23fe28
Configuration of regular ctk-conio.c has been added.
2007-09-11 12:55:16 +00:00
matsutsuka
6dd93a3d04
NEC PC-6001 support sources are initially added.
2007-09-11 12:12:59 +00:00
fros4943
db74bb6566
changed link argument sent to makefile:
...
instead of using linker, user may specify linker line including tools
2007-09-05 14:00:59 +00:00
oliverschmidt
89e81f9eed
Renamed 6502-conf.h into 6502def.h to be in line with similiar files created in the meanwhile and added C99 names.
2007-09-05 10:59:10 +00:00
ksb
6441821fc3
Forgot to add this file
2007-09-01 11:17:25 +00:00
ksb
73dfa52324
Changes IP address so it won't collide with the Tmote.
2007-09-01 10:09:11 +00:00
ksb
2bbf074f39
Added a gateway application the routes between SLIP on USB and the radio.
2007-09-01 10:06:05 +00:00
fros4943
974fcb66d4
convenience function for cooja.
...
converts printf()'s to log_message()'s
2007-08-23 08:14:30 +00:00
fros4943
6d86b77cfe
setting rime id at init
2007-08-23 07:35:26 +00:00
fros4943
d272b062f0
reimplemented receiver calls (earlier tcpip_input) from inside multithreaded environment
2007-08-21 13:09:40 +00:00
ksb
e55dbe433b
Build system improvements.
2007-08-21 09:06:23 +00:00
nvt-se
186a99857b
minor adjustments for ip.
2007-08-20 11:39:03 +00:00
nvt-se
81174c6389
cr->lf
2007-08-20 11:01:13 +00:00
nvt-se
aee4c71200
Use test-abc instead of core.
2007-08-17 13:10:16 +00:00
nvt-se
6dffb0ed63
unnecessary file.
2007-08-17 13:08:38 +00:00
nvt-se
96e06d1dde
Standardized integer types.
...
Removed unecessary volatility.
Make sure that the random back-off is only if the channel is busy.
2007-08-16 20:38:40 +00:00
nvt-se
defbe1d9ac
use new function.
2007-08-16 20:29:56 +00:00
nvt-se
9017949535
Improved interface and C standard compatibility.
2007-08-16 20:29:18 +00:00
nvt-se
6983417307
forgot return.
2007-08-16 17:10:49 +00:00
nvt-se
8b3e9477d9
call dma_init.
2007-08-16 13:54:58 +00:00
nvt-se
d5027f0041
Subscribe to DMA events on line 0 for the radio.
2007-08-16 13:52:17 +00:00
nvt-se
0723f1fbc7
Make it possible to subscribe to DMA events.
2007-08-16 13:51:57 +00:00
nifi
2780aef873
Include msp430def.h for standard defines
2007-08-16 13:35:33 +00:00
nvt-se
fefe56d913
Changes to standard types.
2007-08-16 13:24:57 +00:00
bg-
f398e56048
* Include avrdef.h for standard defines.
...
* Define AODV_COMPLIANCE.
2007-08-16 13:24:20 +00:00
nvt-se
5db2990884
Use the new type definitions file for msp430.
2007-08-16 13:23:41 +00:00
bg-
a20c9e6abb
* Include msp430def.h for standard defines.
...
* Remove obsolete LPM_CONF_OFF definition.
2007-08-16 13:10:53 +00:00
oliverschmidt
c42cbe3141
Added a naive clock implementation based on main loop counting for the Apple2 as it doesn't have a hardware clock.
2007-08-10 13:30:02 +00:00
nifi
296ad6cdb7
Updated to new radio_driver API
2007-08-07 11:20:11 +00:00
nifi
7e57cd240a
Updated to new radio_driver and mac_driver APIs
2007-08-07 11:17:54 +00:00
nifi
cc80dbf546
removed obsolete rime code for tr1001
2007-08-07 11:16:19 +00:00
nifi
d74d8d176d
Updated to new radio_driver API, removed obsolete rime code
2007-08-07 11:14:39 +00:00
nifi
fb54bba19e
Updated to new radio_driver API + LPM4_EXIT instead of LPM_AWAKE()
2007-08-07 11:11:19 +00:00
nifi
39c12bad29
Added stdint.h
2007-08-07 11:09:38 +00:00
nifi
6b2cd5c2d4
LPM4_EXIT instead of LPM_AWAKE()
2007-08-07 11:06:14 +00:00
nvt-se
199e6bd270
Use stdint.h
2007-08-06 12:20:46 +00:00
nvt-se
016778b29e
Removed redundant text.
2007-08-02 08:58:38 +00:00
nvt-se
6139885c51
Awake in order to let event processing occur immediately.
2007-08-02 08:57:58 +00:00
nvt-se
a6af72d129
Style changes.
2007-08-02 08:17:43 +00:00
nvt-se
0412975efd
Uncommented radio init line.
...
Added informative output.
2007-08-02 08:14:00 +00:00
nvt-se
a6dba97b84
Erase only main flash memory.
2007-08-02 08:13:20 +00:00
nvt-se
709adf51ad
Contributions from Michael Baar:
...
# msb430\dev\cc1020.c
Data type problem in the calibration function, therefore looping 10 seconds on boot. Fixed.
# msb430\contiki-msb430-main.c
Directly accessed power management while other modules used the Contiki layer resulting in the node sleeping most of the time. Fixed.
Added uIP support.
# msb430\buildscripts\makefile.win
Changed to erase only main-memory but keep infomemory so the node configuration is not erashed during flashing.
2007-07-31 07:54:44 +00:00
fros4943
1a021bbfc3
random ack time
2007-07-26 13:22:01 +00:00
fros4943
d80efeb8ed
defining uip cache size
2007-07-20 15:21:56 +00:00
fros4943
3768b44804
updated uip uaodv radio driver
2007-07-17 23:02:21 +00:00
fros4943
55443a148a
storing ack destination + removed header compression
2007-07-16 07:40:55 +00:00
fros4943
c50b7cc7ee
unicast packets being acknowledged
2007-07-11 15:23:42 +00:00
nvt-se
836eae63cb
Improvement batch.
2007-07-05 08:35:13 +00:00
nvt-se
eb7f7ba65b
Some more cleaning up.
2007-06-28 18:27:45 +00:00
nvt-se
268766e890
dma transfer support.
2007-06-28 14:41:17 +00:00
nvt-se
ff04b5e153
cleaned file.
2007-06-28 14:07:02 +00:00
nvt-se
b88e6642bd
Removed unnecessary things.
2007-06-28 13:47:28 +00:00
nvt-se
d7c489f0b2
jtag support.
2007-06-28 13:43:24 +00:00
nvt-se
ff3e2b8bd8
From the ESB port.
2007-06-28 12:54:05 +00:00
nvt-se
ae2e9f3677
Platform-specific devices.
2007-06-28 12:52:41 +00:00
nvt-se
792056e325
Test applications.
2007-06-28 12:51:31 +00:00
nvt-se
365f99e5c8
Scatterweb MSB430 port.
2007-06-28 12:49:57 +00:00
fros4943
78a06fe9b5
using nullmac for cooja rime radio
2007-06-08 12:25:54 +00:00
bg-
0e515a5472
* Initialise rand package.
2007-06-04 18:09:14 +00:00
nifi
c4421c1d4b
added Makefile option for choosing between rime and uip
2007-06-01 12:46:07 +00:00
bg-
2e7c6b59fb
* The sources for crtk.o and service.o have been retired.
2007-05-31 14:26:58 +00:00
oliverschmidt
bc46e8a49e
Removed clock stuff from main file.
2007-05-29 22:02:37 +00:00
fros4943
7ec1a4f7aa
added check that outgoing packet was not discarded from simulator
2007-05-29 12:53:49 +00:00
fros4943
6aafd5582d
removed old radio-arch.* (was earlier renamed to cooja-radio)
2007-05-29 12:27:00 +00:00
fros4943
d6d34b33a5
aodv setting
2007-05-29 09:13:37 +00:00
bg-
ceb423c007
* Add sht11_off.
2007-05-28 16:24:58 +00:00
fros4943
da3b1ab813
make sure mote doesn't fall asleep while radio is transmitting/receiving
2007-05-28 15:47:07 +00:00
oliverschmidt
24f6cf175d
Start out with minimal main().
2007-05-27 21:11:08 +00:00
oliverschmidt
f0e3996e07
For now delegate all work to the 6502 makefile.
2007-05-27 21:00:59 +00:00
oliverschmidt
99fdfbb6d8
Start out with default linker config.
2007-05-27 20:56:36 +00:00
oliverschmidt
3a1de93851
Start out with minimal Contiki config.
2007-05-27 20:54:13 +00:00
oliverschmidt
0cd5f4fa0a
Reduced Contiki config to the minimum.
2007-05-27 20:52:42 +00:00
oliverschmidt
793d71f65d
Originally left this file alone as I thought it might help on consolidating with cpu/native/net/tapdev.c but actually is doesn't contain unique content so it can be removed now as well.
2007-05-27 08:54:36 +00:00
oliverschmidt
e7bc74a9d0
Changed packet drivers from services to plain processes.
...
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.
Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
2007-05-26 23:12:56 +00:00
oliverschmidt
75f04995a9
Changed packet drivers from services to plain processes.
...
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.
Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
2007-05-26 23:05:36 +00:00
oliverschmidt
fa3819ed1c
Moved ninimal-ppp into backyard as it depends on the uIP ppp support.
2007-05-26 07:20:07 +00:00
adamdunkels
be2a7e954c
Added initialization of MAC and Rime
2007-05-25 08:08:36 +00:00
adamdunkels
ca356ea2e2
Added CC2420 driver
2007-05-25 08:08:21 +00:00
oliverschmidt
e54fb521e2
The Visual C++ project file is the first to go without service.c .
2007-05-23 23:42:42 +00:00
oliverschmidt
934fa73d29
Moved all existing C64 stuff into new secondary directory tree.
2007-05-23 22:36:05 +00:00
oliverschmidt
a300c31d7e
Removed explicit shut down of network driver as it easily results in endless recursions on errors while network driver initialisation.
2007-05-23 22:01:14 +00:00
oliverschmidt
2e1ac205e2
Avoid compiler warnings.
2007-05-22 21:33:31 +00:00
oliverschmidt
e867c6afcb
Explicitly shut down network driver.
2007-05-22 21:27:55 +00:00
oliverschmidt
a7dba4cc4f
Explicitly shut down network driver.
2007-05-22 21:19:34 +00:00
adamdunkels
dab63c4c6b
Added energy estimation, leds instead of minileds to be able to do energy estimation on leds
2007-05-22 21:16:37 +00:00
adamdunkels
8811fe23fd
Added sht11, energy estimation, xmac, diabled uIP (for now)
2007-05-22 21:13:26 +00:00
adamdunkels
1f835946ca
Added X-MAC configuration, reduced ELF loader text memory size
2007-05-22 21:12:15 +00:00
adamdunkels
81dfaf575c
Updated API
2007-05-22 21:09:19 +00:00
adamdunkels
6357c240c0
Added rtimer, ethernode rime initialization
2007-05-22 21:08:57 +00:00
adamdunkels
a473b6ff33
Made TR1001 work with Rime
2007-05-22 21:08:24 +00:00
adamdunkels
f33844bd9c
Added energy estimation
2007-05-22 21:07:51 +00:00
adamdunkels
b32a9b9be5
Returning the actual value rather than something read during an interrupt
2007-05-22 21:06:57 +00:00
adamdunkels
de4ef02e49
Added energy estimation, size of queue buffers to two.
2007-05-22 21:06:30 +00:00
adamdunkels
42e84048f6
Added energy estimation, low power mode
2007-05-22 21:05:53 +00:00
adamdunkels
770632e079
Removed redundant file
2007-05-22 20:49:39 +00:00
fros4943
cbc6f57f34
removed old cfs.c
2007-05-21 14:57:47 +00:00
fros4943
166ff3a4a0
new includes
2007-05-21 14:52:15 +00:00
bg-
d273319641
* Contiki names for integer types.
2007-05-21 14:51:32 +00:00
bg-
e83221cdab
* Compiler option -mno-tablejump should not be default.
2007-05-21 14:30:52 +00:00
bg-
95d95a63ac
* s/uip-fw-service/uip-fw-drv/
2007-05-21 14:22:05 +00:00
bg-
a3f5123c44
* s/uip-fw-service/uip-fw-drv/
2007-05-21 14:21:07 +00:00
bg-
be3d5e8394
* s/uip-fw-service/uip-fw-drv/
2007-05-21 14:13:04 +00:00
oliverschmidt
a22d2ecfef
Changed packet drivers from services to plain processes.
...
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.
Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
2007-05-20 21:41:31 +00:00
oliverschmidt
5f3296e943
Changed packet drivers from services to plain processes.
...
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.
Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
2007-05-20 21:29:39 +00:00
oliverschmidt
61f54204d7
Improved map file naming consistency.
2007-05-19 21:46:43 +00:00
oliverschmidt
0e023b328a
Changed Contiki File System (cfs) from a service to a plain library.
...
This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.
2007-05-19 21:37:54 +00:00
oliverschmidt
d4528e427f
Changed Contiki File System (cfs) from a service to a plain library.
...
This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.
2007-05-19 21:16:08 +00:00
oliverschmidt
9f97290665
Changed Contiki File System (cfs) from a service to a plain library.
...
This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.
2007-05-19 21:05:48 +00:00
fros4943
8d6cd6a5b5
dummy mtarch
2007-05-19 14:47:17 +00:00
fros4943
841cbd1b99
uIP over uAODV simple radio driver
2007-05-19 14:25:43 +00:00
oliverschmidt
1e372f13c6
Added new include directory to VC++ project files.
2007-05-19 13:38:25 +00:00
oliverschmidt
eaff19200b
Added new header file to VC++ project file.
2007-05-19 13:37:16 +00:00
oliverschmidt
ae2073cac9
Factored out setup directory search path for source files into Makefile.include.
...
- All compilers used support the -I option for setting an include search directory.
- The Contiki source tree follows the (common) approach of placing declarations (in headerf iles) in the same directory as definitions (in source files).
As a result it makes sense to use the -I compiler option for just the same set of directories used for the vpath gnumake directive.
Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
2007-05-19 07:54:53 +00:00
fros4943
41adb8caf3
radio_sstrength returns last received packet instead of current value
...
radio_current_sstrength returns current value
2007-05-18 15:20:20 +00:00
fros4943
8ef1b90a10
removed radio sources from makefile
...
(thrown during compilation instead)
2007-05-18 13:51:04 +00:00
fros4943
2e11cfcdeb
removed compiler warning
2007-05-18 13:50:08 +00:00
fros4943
afe66ed534
cooja radio driver (uip + rime)
2007-05-18 13:49:49 +00:00
fros4943
63c7300388
cooja's init-net for uip and rime
2007-05-18 13:49:15 +00:00
fros4943
643ce5adfe
added support for several contiki comm stacks (uip + rime)
2007-05-18 13:45:19 +00:00
fros4943
5b3923141f
added buffer overflow check
2007-05-15 18:13:32 +00:00
fros4943
2f29a448dd
radio_sstrength returns the signal strength of last packet received (instead of uninteresting current value)
2007-05-15 14:39:52 +00:00
adamdunkels
71573a4968
Added sht11 driver, energy estimation. Removed IP/SLIP support for now
2007-05-15 08:11:59 +00:00
adamdunkels
459d91512a
Added rtimer initialization
2007-05-15 08:11:33 +00:00
adamdunkels
d9a4c02fab
Platform-specific energy estimation code
2007-05-15 07:42:22 +00:00
oliverschmidt
237b1617b5
Factored out setup directory search path for source files into Makefile.include.
...
- Search target specific directories before CPU specific directories.
- Search CPU specific directories before generic directories.
Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
2007-05-13 08:41:11 +00:00
oliverschmidt
4fd1e3ece0
Added signed 32 bit data type.
2007-05-12 20:58:12 +00:00
nifi
4601d620b9
network setup for uip without slip
2007-05-09 15:13:01 +00:00
bg-
07d885ff2b
* Add cle_avr.o
2007-04-26 13:40:26 +00:00
bg-
242f8085be
* Add cle_msp430.o
2007-04-26 13:39:52 +00:00
bg-
cf14e47a0f
* Also include dynamic loader (tcp_loader.o).
2007-04-26 12:55:46 +00:00
bg-
8754cbd4cd
* Use mknmlist-ansi and sym.o.
2007-04-25 15:49:43 +00:00
fros4943
da3d423233
support for sending several packets fast
2007-04-23 08:46:35 +00:00
oliverschmidt
42d0fe9c18
Very minor beautification.
2007-04-21 22:17:22 +00:00
oliverschmidt
3b7c27b9e9
Use generally lowercase names for functin variables.
2007-04-21 15:11:21 +00:00
oliverschmidt
dba1672323
Make use of __inline (just as making use of __fastcall) in order to check that CC_CONF_INLINE (just as CC_CONF_FASTCALL) are used in a syntactically correct manner.
2007-04-18 21:36:44 +00:00
oliverschmidt
33eeb8ccbb
- Switched from from a CTK draw service to a statically linked CTK draw implementation.
...
- Workarounded the following CTK glitch:
ctk.c calls ctk_arch_keyavail() and ctk_arch_getkey() and needs therefore appropriate declarations (or macros) but it doesn't include a ctk_arch.h or alike to bring those in. So it's necessary to bring those declarations in via contiki-conf.h.
But ctk_arch_getkey() is supposed to return a ctk_arch_key_t - and this typedef'ed in ctk.h which means that ctk.h would need to be included in contiki-conf.h before declaring ctk_arch_getkey().
This IS rather undesirable so the current workaround is to declare ctk_arch_getkey() as returning a char - this is btw done similiar in platform/gtk as well. See ctk/ctk-gtksim.h:
guint ctk_arch_getkey(void);
2007-04-15 13:30:16 +00:00
oliverschmidt
f16d041476
Provided a meaningful clock_time() implementation - which btw. makes the Cygwin variant finally work :-)
2007-04-14 23:23:15 +00:00
oliverschmidt
3a8fb3ad9f
Initializing the console Just-In-Time on CTK startup and starting up the WinPcap before CTK allows WinPcap to print initialization errors (especially a missing command line arg) without clearing the shell output.
2007-04-14 14:57:19 +00:00
oliverschmidt
c1b0a3f0d3
Cygin (in opposite to VC++) doesn't call exit() - and thus our atexit function - on Ctrl-C. Therefore we install an explict ConsoleCtrlHandler which calls exit(). For the sake of simplicity it's not #ifdef'ed _CYGWIN_.
2007-04-14 14:28:19 +00:00
oliverschmidt
8f0753c402
Link in and start the POSIX file system to make the telnet-server example 'ls' command generally work. Typically it will complain about not finding 'cfs-root/.'
2007-04-13 23:08:52 +00:00
oliverschmidt
766878f5c9
Added the shell server to the Win32 platform.
2007-04-13 21:55:55 +00:00
oliverschmidt
59c2158274
Removed minor redundancy.
2007-04-13 21:47:09 +00:00
oliverschmidt
7aae71934d
Providing a dummy program_handler_load() made made the telnet server work without program-handler but on the other hand incompatible with an exsistng program handler :-(
...
Therefore I replaced that hack with a clean CONF macro, which by the way really removes the run() and exec() functionality instead of just implementing it empty.
2007-04-13 21:04:52 +00:00
bg-
87971c35db
* Bump maximum number of udp sockets to 16 and fwcache size.
...
* Remove unused stuff.
2007-04-11 15:24:39 +00:00
bg-
b32db9763e
* Bump maximum number of udp sockets to 16.
...
* Remove unused stuff.
2007-04-11 15:22:05 +00:00
fros4943
f2f5ea682b
added empty rtimer files to remove compilation errors
...
OBS: not implemented yet; rtimer does not work with COOJA
2007-04-11 12:46:13 +00:00
bg-
738a970660
* Also print channel number.
2007-04-11 10:13:59 +00:00
oliverschmidt
36f6efd21c
Build the web server with CTK support.
2007-04-11 01:08:46 +00:00
oliverschmidt
743ec10b21
Added copyright notice.
2007-04-11 01:07:47 +00:00
oliverschmidt
902e2226b6
Use the cpu/native/net WinPcap driver for platform/win32 as well.
2007-04-11 00:33:08 +00:00
oliverschmidt
0b140bdec4
Integrated WinPcap driver into platform/win32 Cygwin build.
2007-04-11 00:32:31 +00:00
oliverschmidt
4bf1ecc20e
Made endianess configuration actually work.
2007-04-11 00:25:38 +00:00
oliverschmidt
ee6180dec6
Use the cpu/native/net WinPcap driver for platform/win32 as well.
2007-04-11 00:17:25 +00:00
oliverschmidt
2edc0246a3
Removed unnecessary directory reference.
2007-04-10 21:02:59 +00:00
oliverschmidt
38c3950d66
Link WinPcap packet driver statically into the main binary in preparation of removing the services.
2007-04-09 11:57:15 +00:00
oliverschmidt
9cc1871810
Fixed stupid bug. I have no idea how I didn't run into this one for months ! The development platforms have 400-600 bytes buffer size. So every incoming 1500 packet overwrote ~ 1000 bytes of uIP variables. And this happens very easily as every packet coming in for the Windows IP stack is seen by uIP as well (and discarded because of the wrong IP address).
2007-04-08 20:06:56 +00:00
oliverschmidt
d0e75920f1
Moved VC++ project files into vcproj subdirectory.
2007-04-06 23:53:59 +00:00
oliverschmidt
5653794966
Allow to build platform/win32 using Cygwin and the Contiki build system. The WinPcap driver is missing as it is about to be changed from dynamic to static loading anyway.
2007-04-06 23:09:32 +00:00
oliverschmidt
5532354cd8
Now that Contiki has a htonl() we need the same workaround here that we already have for htons().
2007-04-06 22:36:31 +00:00
nifi
0b4a7e1c3d
network setup for uip with slip
2007-04-05 08:11:57 +00:00
bg-
8f822c42b1
* Device driver for the SHT1x on the Tmote sky.
2007-04-04 12:48:50 +00:00
bg-
9205ceda12
* rm uip_log.
...
* more forced inclusions.
2007-04-04 11:41:38 +00:00
bg-
48c5cae451
* More routing and forwarding cache entries.
2007-04-04 11:39:49 +00:00
bg-
0d4799a415
* rm uip_log.
2007-04-04 11:38:35 +00:00
fros4943
6910c4d311
starting the tr1001 rime process at init
2007-04-04 09:12:14 +00:00
adamdunkels
04a5405540
Added initialization of rtimers
2007-04-03 19:04:50 +00:00
adamdunkels
c24044e80c
Made text appear lower to the right, made window larger to accommodate all nodes
2007-04-02 17:58:43 +00:00
fros4943
66e6ce1656
minor changes
2007-04-02 16:31:28 +00:00
fros4943
3d5298ab69
always consuming button events
...
(bug fix: mote falls asleep during fast button clicks)
2007-04-02 14:14:26 +00:00
nifi
472619fe9c
changed notification printout to be one line
2007-04-02 13:35:54 +00:00
fros4943
6e3dc4d24b
added source file check before launching cooja
2007-04-02 10:28:52 +00:00
adamdunkels
05692681a7
Stats are already printed during exit()
2007-04-02 10:03:35 +00:00
fros4943
0f17706ef3
automatically generating cooja.jar
2007-04-02 09:07:30 +00:00
fros4943
c06c28c668
new mulithreading switch function.
...
should work on both linux and win32 platforms
2007-04-02 08:47:28 +00:00
oliverschmidt
5bceecfbb0
Added Cygwin networking support using WinPcap.
2007-04-01 21:05:17 +00:00
oliverschmidt
01b9b31952
Moved wpcap*.[ch] from platform/minimal-net/net to cpu/native/net.
2007-04-01 20:39:05 +00:00
