deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Contributions from Michael Baar:

Browse source 
# msb430\dev\cc1020.c
Data type problem in the calibration function, therefore looping 10 seconds on boot. Fixed.

# msb430\contiki-msb430-main.c
Directly accessed power management while other modules used the Contiki layer resulting in the node sleeping most of the time. Fixed.
Added uIP support.

# msb430\buildscripts\makefile.win
Changed to erase only main-memory but keep infomemory so the node configuration is not erashed during flashing.
This commit is contained in:
nvt-se 2007-07-31 07:54:44 +00:00
parent 70ddc0f27e
commit 709adf51ad
3 changed files with 53 additions and 26 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
platform/msb430/buildscripts/Makefile.win
View file

@ -1,7 +1,7 @@
%.u: %.ihex
msp430-jtag -eI $^
msp430-jtag --lpt=TIUSB -mI $^
#CW=cw23
#%.u: %.ihex
# $(CW) -d f430p $^
# $(CW) -d f430p $^

60
platform/msb430/contiki-msb430-main.c
View file

@ -53,8 +53,22 @@
#include "net/mac/nullmac.h"
#include "net/mac/xmac.h"
#include "dev/slip.h"
SENSORS(NULL);
#if WITH_UIP
static struct uip_fw_netif slipif =
{UIP_FW_NETIF(192,168,1,2, 255,255,255,255, slip_send)};
#else
int
putchar(int c)
{
rs232_send(c);
return c;
}
#endif /* WITH_UIP */
static void
set_rime_addr(void)
{
@ -117,30 +131,46 @@ main(void)
uart_lock(UART_MODE_RS232);
uart_unlock(UART_MODE_RS232);
//slip_arch_init(BAUD2UBR(115200));
cc1020_init(cc1020_config_19200);
// network configuration
node_id_restore();
nullmac_init(&cc1020_driver);
rime_init(&nullmac_driver);
set_rime_addr();
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200));
#endif
/* System services */
process_start(&etimer_process, NULL);
//process_start(&sensors_process, NULL);
//cc1020_init(cc1020_config_19200);
// network configuration
node_id_restore();
#if WITH_UIP
uip_init();
uip_sethostaddr(&slipif.ipaddr);
uip_setnetmask(&slipif.netmask);
uip_fw_default(&slipif); /* Point2point, no default router. */
tcpip_set_forwarding(0);
#endif /* WITH_UIP */
nullmac_init(&cc1020_driver);
rime_init(&nullmac_driver);
set_rime_addr();
#if WITH_UIP
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
#endif /* WITH_UIP */
leds_off(LEDS_ALL);
printf("Autostarting processes\n");
lpm_on();
autostart_start((struct process **) autostart_processes);
for (;;) {
while (process_run());
if (process_nevents() == 0)
LPM1;
while (process_run() > 0);
if (process_nevents() == 0) {
LPM_SLEEP();
}
}
return 0;

15
platform/msb430/dev/cc1020.c
View file

@ -552,7 +552,6 @@ cc1020_reset(void)
static int
cc1020_calibrate(void)
{
unsigned char tmp;
unsigned int timeout_cnt;
// Turn off PA to avoid spurs during calibration in TX mode
@ -561,22 +560,20 @@ cc1020_calibrate(void)
// Start calibration
cc1020_write_reg(CC1020_CALIBRATE, 0xB5);
clock_delay(1200);
while ((tmp = cc1020_read_reg(CC1020_STATUS) & CAL_COMPLETE) == 0);
while ((cc1020_read_reg(CC1020_STATUS) & CAL_COMPLETE) == 0);
clock_delay(800);
// Monitor lock
timeout_cnt = LOCK_TIMEOUT;
do {
tmp = cc1020_read_reg(CC1020_STATUS);
} while (tmp & LOCK_CONTINUOUS && --timeout_cnt > 0);
for (timeout_cnt = LOCK_TIMEOUT; timeout_cnt > 0; timeout_cnt--) {
if (cc1020_read_reg(CC1020_STATUS) & LOCK_CONTINUOUS)
break;
}
// Restore PA_POWER
cc1020_write_reg(CC1020_PA_POWER, cc1020_pa_power);
// Return state of LOCK_CONTINUOUS bit
return (cc1020_read_reg(CC1020_STATUS) & LOCK_CONTINUOUS) ==
LOCK_CONTINUOUS;
return (cc1020_read_reg(CC1020_STATUS) & LOCK_CONTINUOUS) == LOCK_CONTINUOUS;
}
static int