Changed the \mainpage doxygen tag to avoid confusion with the main Contiki \mainpage
This commit is contained in:
parent
c10a29af19
commit
3428e17cea
1 changed files with 6 additions and 6 deletions
|
@ -1,15 +1,15 @@
|
|||
/**
|
||||
* \mainpage ATmega3290p LCD Driver Software for Raven
|
||||
* \section ATmega3290p LCD Driver Software for Raven
|
||||
*
|
||||
*
|
||||
* \section intro_lcd LCD Introduction
|
||||
* \subsection intro_lcd LCD Introduction
|
||||
*
|
||||
* This Raven LCD Driver application software was designed for a user interface
|
||||
* to the Contiki 6LoWPAN collaboration on board the ATmega3290p. The
|
||||
* LCD functionality uses the binary command set described in the release notes.
|
||||
* These binary commands can also be found in a list of main.h.
|
||||
*
|
||||
* \section compile_lcd Compiling Raven LCD Driver
|
||||
* \subsection compile_lcd Compiling Raven LCD Driver
|
||||
*
|
||||
* Raven LCD Driver can be compiled on the following platforms:
|
||||
*
|
||||
|
@ -24,7 +24,7 @@
|
|||
* toolchain.
|
||||
* -# <b>IAR EWB-AVR.</b> is currently not supported.
|
||||
*
|
||||
* \section fuses Board fuse settings
|
||||
* \subsection fuses Board fuse settings
|
||||
*
|
||||
* The Raven LCD (3290p device) requires the proper fuse settings to function
|
||||
* properly. These settings have been summarized below:
|
||||
|
@ -33,7 +33,7 @@
|
|||
* -# High: <b>0x99</b> (JTAG and ISP enabled, No OCDEN or EEPROM saving required)
|
||||
* -# Low: <b>0xE2</b> (Use Int RC OSC - Start-up Time:6CK + 65ms)
|
||||
*
|
||||
* \section notes Operation Release Notes
|
||||
* \subsection notes Operation Release Notes
|
||||
*
|
||||
* After programming the Raven LCD 3290p with the proper image, you will be introduced to
|
||||
* the menu in the picture below:
|
||||
|
@ -56,7 +56,7 @@
|
|||
* to the webserver for Sensor Reading Data (<b>Once</b> or <b>Auto</b>). The webserver will
|
||||
* only update the html data when <b>refreshed</b>.
|
||||
*
|
||||
* \section binary Binary Command Description
|
||||
* \subsection binary Binary Command Description
|
||||
*
|
||||
* Using the binary commmand list described in main.h, the 3290p will contruct a binary
|
||||
* command serial frame to control the 1284p. An example command frame is contructed below:
|
||||
|
|
Loading…
Reference in a new issue