fros4943
bcc62fbb65
no error dialog for mspsim breakpoints
2010-08-13 09:53:33 +00:00
oliverschmidt
46b83d6ba4
Included Breadbox64 into cc65 binary relaease tools.
...
This additional application results in three disks for the Apple2, two disks for the C64 and one disk for the C128. Therefore the download page can't get along anymore without some JavaScript adjusting the number of downloadable disks depending on the selected machine. With JavaScript turned off access to non-existent disks (i.e. disk 3 for the C64) results in a successfull download of a zero byte sized file - not exactly great but at least a defined behaviour.
2010-08-05 22:50:19 +00:00
dak664
52ff852aa8
Add optional time stamps, delays, and verbosity levels
2010-07-30 20:44:24 +00:00
fros4943
3fc00a8bed
minor fix to allow adding mote interfaces from configuration
2010-07-05 16:48:55 +00:00
fros4943
7712b7e1ed
fixed nogui-argument
2010-07-01 11:14:00 +00:00
adamdunkels
5dc55f0a1b
A quick and dirty service registry daemon hack. The servreg-hack
...
allows a program to register an 8-bit service ID that gets
disseminated to the entire network, as long as a servreg-hack daemon
is running on all neighbors. Other nodes can look up the service ID to
figure out what nodes in the network offer this service.
This is officially labeled as a "hack" so that we don't get too comfy
with it; this hack is not the future of service discovery and
advertisement in Contiki.
2010-06-15 19:00:28 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
fros4943
53e150f240
bugfix: autofiltered data did not always trigger serial port event
2010-06-11 14:12:09 +00:00
fros4943
f3f6a0de24
minor fixes: using split pane, bugfix with canonical paths, added remove button
2010-06-11 09:12:21 +00:00
fros4943
b540408add
added argument for disallowing config relative paths
2010-06-11 09:10:52 +00:00
nifi
351325b7f4
minor cleanup of example (changed to use uiplib to parse IPv6 address)
2010-06-01 13:31:23 +00:00
nvt-se
ef16508613
Fixed problems with boot order and short timeouts in the UDP tests.
2010-06-01 12:23:24 +00:00
joxe
8e619e991d
added support for sending link prefix to RPL border router
2010-05-25 19:05:31 +00:00
joxe
0d3c7edd6c
fixed for new uip_buf
2010-05-24 11:10:51 +00:00
fros4943
2f64d4b3ab
minor addition: sort motes by distance
2010-05-21 08:46:44 +00:00
adamdunkels
052c536db7
Remove the unicast mass-send test since the default number of queuebufs cannot handle 20 concurrent packets
2010-05-20 20:56:36 +00:00
fros4943
106bcc3c66
disable tree icons icon at errors
2010-05-19 17:52:23 +00:00
fros4943
83a1819992
fix: default icons are not always available
2010-05-19 17:38:46 +00:00
fros4943
b229e9aa59
rewrote project dialog, for easier import and management of cooja projects
2010-05-19 17:32:53 +00:00
nifi
16a3f710a4
Minor optimization: only lookup data when needed
2010-05-19 12:58:15 +00:00
fros4943
d6d84a1baa
Added support for attribute colors, as introduced by the VisualHints Contiki project by Joris Borms.
...
Example usage in Contiki:
printf("#A myattr=123;RED\n"); // color myattr attribute
printf("#A color=RED\n"); // color mote
For more examples, see the MoteAttribute documentation.
2010-05-17 14:32:30 +00:00
fros4943
89c2c0c2c4
updated documentation examples
2010-05-17 14:21:51 +00:00
fros4943
5a3a938d1b
added mote attribute visualizer skin: prints mote attributes below each mote
2010-05-17 11:44:16 +00:00
fros4943
e7b0902799
attribute summary method made public
2010-05-17 11:41:22 +00:00
fros4943
66657d9980
updated mspsim.jar that allows reading the current cpu speed
2010-05-17 09:57:31 +00:00
fros4943
8d7f9e2d72
plugin cleanup: removed list of mote interfaces, instead providing links to useful mote plugins
2010-05-17 09:30:27 +00:00
fros4943
f237e16d71
added stub for reading current cpu frequency of emulated motes
2010-05-17 09:29:28 +00:00
nifi
2bfeb01dcd
Replaced borders with separator for a more compact view
2010-05-09 22:50:34 +00:00
joxe
ffdda2259f
made COOJA avoid guessing that the debug printouts are TinyOS if many SLIP chars in stream
2010-05-09 19:45:57 +00:00
nifi
99b2dd8ef7
Added option to connect to server instead of serial port
2010-05-07 12:22:41 +00:00
nifi
d34f278256
jcreate now has its own platform
2010-05-04 10:38:55 +00:00
nvt-se
35282593c0
Updated the test information messages.
2010-05-03 14:56:13 +00:00
nvt-se
c50e4ab4f3
Switched to examples/udp-ipv6 as the code for the test
2010-05-03 14:48:47 +00:00
fros4943
be5656ec2e
set cooja mote random seed depending on simulation random seed
2010-05-02 09:42:52 +00:00
nvt-se
528614e89f
Converted the test to examples/udp-ipv6
2010-04-30 22:16:51 +00:00
nvt-se
15f84a93fa
Converted the test to use examples/udp-ipv6
2010-04-30 16:20:42 +00:00
nvt-se
66d99e00ec
Removed obsolete test for the rimeroute module
2010-04-30 16:04:23 +00:00
fros4943
dc25860caa
added option for mote-specific background coloring in log listener
2010-04-28 09:39:26 +00:00
fros4943
f4976f8800
test info minor fix
2010-04-27 07:15:33 +00:00
fros4943
dcc949e9ba
set serial socket project to default cooja project
2010-04-26 08:21:01 +00:00
fros4943
87dd04fbd8
compiling serial socket project per default
2010-04-26 08:20:11 +00:00
fros4943
c2876b2d25
minor fix: save iconified plugins
2010-04-26 08:19:32 +00:00
fros4943
a430573688
restructured focus menu items, removed debugging output
2010-04-26 08:05:31 +00:00
fros4943
c7ef068f33
improved zoom
2010-04-26 08:00:19 +00:00
joxe
9f00170c59
made tunslip6 take an argument for TAP/TUN
2010-04-16 12:39:46 +00:00
nifi
6d9f904627
Minor cleanup of the radio logger output (packet description).
2010-04-06 23:38:18 +00:00
adamdunkels
d9d3f7b6b5
Bugfix: don't send packets if they are shorter than the link layer header length
2010-04-05 21:05:56 +00:00
adamdunkels
5af47a2f0c
Latest SVN version of MSPsim
2010-04-04 12:31:05 +00:00
joxe
3a286c4f93
improved tunslip6 with support for debug printouts and configuration of IPv6 address
2010-04-02 18:17:20 +00:00
joxe
df4247f0c6
slightly improved timing on CCA/RSSI in the CC2420 emulation
2010-04-01 18:15:05 +00:00
fros4943
2595d31367
updated collect test: bigger network (50), more hops, bugfixed duplicate detection
2010-04-01 12:22:39 +00:00
joxe
02dc04cc6a
improved CC2420 emulation
2010-03-31 20:11:03 +00:00
fros4943
70ab82761b
test now also includes multi-hop pinging (uip_over_mesh), up to 4 hops
2010-03-31 09:35:01 +00:00
oliverschmidt
8dd2b75383
Explicitly set CBM filetypes (PRG, USR).
2010-03-31 06:05:37 +00:00
fros4943
bb7944a201
workaround to survive the bad characters that are sometimes printed by mspsim-based motes + make clean before compilation
2010-03-29 14:14:09 +00:00
fros4943
6460bc1214
old compilation flag WITH_NULLMAC=1 was replaced by netstack's nullmac_driver and nullrdc_Driver
2010-03-29 13:00:15 +00:00
fros4943
f228272cfc
test update: contiki shell prompt was changed
2010-03-29 10:52:22 +00:00
fros4943
d84f84de52
bugfix: using MspMoteTimeEvent:s to ensure that MSPSim's internal clock is correct when button is clicked
2010-03-29 10:18:14 +00:00
fros4943
9316b31d9a
shell command 'ps' was removed from sky-shell.c, instead using 'echo' in test
2010-03-29 09:20:47 +00:00
fros4943
90f174509b
removed previous workaround for already fixed bug in CC2420 CRC
2010-03-26 13:33:40 +00:00
fros4943
ce5d19fefd
moved elf loading and debugging info to the mote type, rather than keeping a separate refence in each mote. this patch reduces both the memory usage of MSPSim-based motes, and the processing time to load them
2010-03-26 12:29:11 +00:00
nifi
e6a8ba41fd
Added consumer thread timeout
2010-03-26 10:11:50 +00:00
fros4943
9a32ec8a31
using update aggregator to avoid event queue flooding in fast simulations, restructured copy to clipboard popup menu
2010-03-26 09:29:04 +00:00
fros4943
c6c0b1b486
help class that simplifies effective handling of high rate events, that otherwise might flood the event queue
2010-03-26 09:27:58 +00:00
fros4943
96979b5fbf
lower simulation thread priority, added timeout on blocking stop simulation method
2010-03-26 09:26:22 +00:00
fros4943
e4c3ac8125
synchronizing access to log list
2010-03-26 09:12:20 +00:00
joxe
1f4ced16eb
fixed ack with DSN CC2420 and improved timer capture
2010-03-25 16:32:00 +00:00
fros4943
20d9f70b09
plugin is updated to support non-visualized simulations
2010-03-25 08:00:15 +00:00
nifi
81dbcf1654
Added option to move motes in Visualizer without confirm dialog by dragging motes with ALT button pressed
2010-03-24 14:22:56 +00:00
fros4943
78069e8853
minor fix: section size was printed in hex, not decimal
2010-03-24 12:29:33 +00:00
nifi
75481f6460
Removed debug output
2010-03-23 12:05:36 +00:00
adamdunkels
8f7e96b06f
Tools for parsing and plotting a power trace from Contiki
2010-03-19 22:01:34 +00:00
fros4943
f2a1604b63
make portable paths method public
2010-03-19 15:04:51 +00:00
fros4943
54db259c32
using EXPORT attribute to automatically copy firmware files in executable JARs
2010-03-19 15:04:05 +00:00
fros4943
4498c39e9e
removed debugging output
2010-03-19 15:03:14 +00:00
fros4943
e83635832a
added simconfig attribute EXPORT that determines how files should be handled when a simulation is exported as an executable JAR
2010-03-19 15:02:26 +00:00
nifi
cba5256ca2
updated to use uip-ds6
2010-03-19 12:58:17 +00:00
fros4943
ae122627de
export project config to allow project plugins to be run from executable jars
2010-03-19 12:34:37 +00:00
fros4943
c71b5b60d0
minor bugfix: cause may be null
2010-03-19 12:34:03 +00:00
fros4943
aa41f9218a
loading user settings before generating executable jar, added debugging output
2010-03-19 11:32:59 +00:00
fros4943
c5c6c3b775
return success (0) after exporting jar, use portable firmware paths in exported config
2010-03-19 09:08:38 +00:00
fros4943
09446c0ee7
added export-jar target, updated help
2010-03-19 08:57:04 +00:00
nifi
ef5a4a6ad7
only add separator if there is more data
2010-03-17 22:44:20 +00:00
nifi
0a579e0c6a
Bug fix: only continue to analyze packet data when ANALYSIS_OK_CONTINUE is returned from previous analyzer.
2010-03-17 14:16:13 +00:00
nifi
60ea81297a
Removed the IPHC flags from the brief packet description (the flags are shown in the verbose description)
2010-03-16 13:10:50 +00:00
fros4943
79f4dd467e
added maximum log message size (1024 bytes) to avoid buffering up on binary serial output
2010-03-15 22:04:26 +00:00
fros4943
2f20d6b108
fixed cc2420's received signal strength indicator to be an average of the last 8 symbols (192us)
2010-03-15 19:22:03 +00:00
fros4943
573e772a32
removed contiki cooja template source, updated configurations
2010-03-15 11:04:37 +00:00
fros4943
ace6cff93f
do not generate source + prepare environment method was updated
2010-03-15 11:04:06 +00:00
fros4943
99fe1faa0a
updated mspsim.jar with improved sht11 support
2010-03-15 08:06:12 +00:00
fros4943
4fa88d2bfd
added method for getting mote interfaces based on class names + getInterfaces() returns a collection instead of a vector
2010-03-14 19:50:34 +00:00
fros4943
4710441bb6
added temperature mote interface for sky motes
2010-03-14 19:45:04 +00:00
fros4943
5877528f3a
added possibility to add radio logger analyzers from cooja projects
2010-03-12 16:02:47 +00:00
joxe
efda8edcc5
fixed UDP uncompression
2010-03-12 14:23:40 +00:00
fros4943
ef35fe6e6e
added experimental visualizer skin that shows the current source code of each mote in the simulation (for emulated mspmotes only)
2010-03-11 22:15:58 +00:00
fros4943
87733c176a
added notes plugin, useful for storing simulation notes in the config
2010-03-11 22:11:10 +00:00
fros4943
b422ef90ad
updated help
2010-03-10 14:49:47 +00:00
fros4943
9e229a35c4
bugfix: bad jar arguments
2010-03-10 14:47:58 +00:00
fros4943
6b68d2e051
added output jar arguments
2010-03-10 14:39:47 +00:00
fros4943
feb0db0b3e
print jar process errors if building archive fails
2010-03-10 14:17:36 +00:00
fros4943
f057939595
delete META-INF directory before building JAR
2010-03-10 13:09:05 +00:00
fros4943
bffd3ca433
warn if JAVA_HOME is not set
2010-03-10 12:48:35 +00:00
fros4943
adf6263b0d
updated configs: MAC_DRIVER was replaced by NETSTACK_RDC
2010-03-10 12:34:29 +00:00
fros4943
f9e4ebf7cf
updated test configs: the test should normally not specify the network configuration, but rather use the default in the application directory
2010-03-10 12:29:24 +00:00
fros4943
89d7d926c4
added ipv4 and ipv6 default configuration
2010-03-10 12:18:29 +00:00
fros4943
7dd4397f6c
bugfix: getSignalStrength() did not return the correct value
2010-03-10 10:11:36 +00:00
fros4943
7c25544cdb
added possibility to override the default netstack in contiki-conf.h at compile time, by specifying another header
2010-03-10 07:51:30 +00:00
fros4943
70dd5454fc
removed contiki motes' communication stack configuration; the network stack instead depends on compiler flags/contiki-conf.h
2010-03-10 07:49:25 +00:00
joxe
52114b50e3
fixed serial-input bug in MSPSim
2010-03-09 12:16:10 +00:00
nifi
c4370676ee
Fixed CRC for updated CRC-handling in new MSPSim
2010-03-09 10:37:47 +00:00
fros4943
e3a3b2a845
catch no class exception when registering new plugin
2010-03-09 08:27:48 +00:00
fros4943
5c8b306558
simplified code, netstack init without relying on external net_init() functions
2010-03-09 08:16:05 +00:00
fros4943
07753fb01f
updated radio driver, simplified code
2010-03-09 08:11:05 +00:00
fros4943
0cb572bcb6
temporarily disabled communication stacks on cooja platform, removed radio sensor
2010-03-09 08:09:57 +00:00
joxe
bde33fa4d7
new version of mspsim.jar - improved CC2420 emulation + bugfix of SFR handling - fixes UART bug
2010-03-08 14:53:42 +00:00
fros4943
df8cc48739
three patches to simplify loading TinyOS firmwares (via MSPSim), contributed by Philipp Sommer
2010-03-08 14:26:12 +00:00
fros4943
03605a568c
bugfix: wrapping signal strength updates in separate event, to be executed after the last byte received
2010-03-08 11:29:39 +00:00
joxe
c1ce8721d8
added support for icmpv6 analysis / RPL
2010-03-07 20:44:40 +00:00
joxe
577056c452
fixed 6lowpan analyzer
2010-03-07 19:53:07 +00:00
oliverschmidt
8ca206aa6b
Changed ETH64 base address from $DE10 to $DE00 as this is the default base address according to the manufacturer.
2010-03-06 13:05:16 +00:00
fros4943
308ecfed2a
simple patch to allow application motes to receive serial data
2010-03-05 14:59:43 +00:00
nifi
b59845d117
Minor cleanup of radio logger verbose output
2010-03-03 12:45:39 +00:00
fros4943
024d8ff2b5
minor fixes: better statistics output, added zoom level, popup menu labels
2010-03-02 13:33:10 +00:00
fros4943
4c9112a176
enabled debug output again
2010-03-02 13:24:48 +00:00
fros4943
d3b44510f8
make cli method public
2010-03-02 13:22:29 +00:00
adamdunkels
486f7f9728
Rewrite of the Sky shell collect test. The new test is better equipped
...
to handle reordered packets - unlike the previous test, the new test
counts all incoming packets in the data stream, even those that are
significantly reordered. The new test also shows the received packets
and their hop counts in a much more readable fashion.
2010-02-28 08:25:36 +00:00
nifi
a373c426f0
Disabled the cross-level conversion of Contiki timestamp (currently not used by Contiki)
2010-02-26 08:15:41 +00:00
nifi
52d234417d
Changed to draw the network traffic under the motes
2010-02-26 07:46:26 +00:00
nifi
512da4195c
Changed to draw the mote relations under the motes
2010-02-26 07:38:08 +00:00
nifi
74df2dbf43
* Save selected packet analyzer chain and split pane position in simulation file
...
* Update all log entries when changing packet analyzer chain
* Added popup menu to verbose pane
* Added serialVersionUID to menu actions to avoid compiler warnings
2010-02-25 23:44:16 +00:00
joxe
83d203afb5
added support for hc06 decompression in radiologger / analyzer
2010-02-25 22:36:08 +00:00
fros4943
026c4d7e85
synchronize time to timeline and radio logger at space key
2010-02-24 10:45:44 +00:00
fros4943
4c7ca7009b
listen to all log interfaces, also mote debug interfaces
2010-02-24 10:38:35 +00:00
fros4943
be76ae53f9
added warning when reloading a simulation with less then 20% memory left
2010-02-23 22:53:34 +00:00
joxe
fbc5b20404
added initial 802.15.4 and IPHC/hc06 analyzer
2010-02-23 22:35:17 +00:00
joxe
588d0374fa
added initial 802.15.4 packet analyzer to COOJA radio logger
2010-02-23 22:32:57 +00:00
fros4943
cd8047bc77
added method that returns a mote with the given id
2010-02-23 21:55:55 +00:00
adamdunkels
14bc9aa98b
New and improved shell collect test: the new test sends out 10 packets from each node and counts the received packets. If less than 10 packets from each node is received, the test fails
2010-02-23 18:46:20 +00:00
fros4943
dbd1cd7b08
show contiki stack trace in error dialog, not just print to console
2010-02-21 21:50:58 +00:00
adamdunkels
51980f0be4
CC2420_CONF_AUTOACK is now defined in contiki-conf.h
2010-02-18 23:03:36 +00:00
joxe
470b93c79f
added mote attributes to various types of motes
2010-02-18 11:13:20 +00:00
joxe
19c75b30e0
added the MoteAttributes interface for handling mote printouts of #A x=y
2010-02-18 11:06:37 +00:00
adamdunkels
333c14e734
New version of MSPsim from the MSPsim SVN, with support for CC2420 auto ACKs
2010-02-17 18:51:59 +00:00
oliverschmidt
94153a9508
Adjusted Contiki download page content to the fact that there are now two disk images (apart from the larger D71 image for the C128).
2010-02-14 17:41:05 +00:00
fros4943
66bf4a6063
temporarily disabled experimental mspsim debug interface for upcoming release
2010-02-12 09:34:49 +00:00
fros4943
c56d04e2bb
added support for external script file, which currently requires manually editing the .csc
2010-02-12 09:28:28 +00:00
fros4943
f1db103777
added support for multiple log interfaces
2010-02-12 09:25:46 +00:00
oliverschmidt
49e73b71b8
Added new wget app (and some reorg).
2010-02-11 10:13:18 +00:00
fros4943
308df68375
bugfix: only handle log output from our mote + added support for debug log interface
2010-02-10 13:29:27 +00:00
fros4943
6d987651c6
bugfix: previously did not listen to all log interfaces
2010-02-09 22:14:23 +00:00
oliverschmidt
736d49c7f1
Added new DHCP app (and some reorg).
2010-02-08 22:29:26 +00:00
fros4943
8ec88e2fcb
added method for turning off radio receiver of application motes
2010-02-08 16:00:46 +00:00
adamdunkels
5efce5eeed
The path to the Contiki root was not correctly set
2010-02-06 18:23:04 +00:00
adamdunkels
d5e133bf7c
Added target for making the tools/ and tools/sky/uip6-bridge
2010-02-06 18:22:34 +00:00
adamdunkels
9011013fb0
Automated test for testing IPv6/6lowpan fragmentation
2010-02-06 09:57:14 +00:00
fros4943
5424b679be
removed unused configurations and increased default contiki mote transmission bitrate to 250kbit/s
2010-02-05 09:09:55 +00:00
fros4943
4d7fe46561
removing obsolete method previously used for estimating contiki's energy consumption.
2010-02-05 09:07:58 +00:00
fros4943
cdb1b93dc6
removing obsolete method previously used for estimating contiki's energy consumption + removed encoding overhead and header assumption when calculating transmission durations
2010-02-05 09:07:13 +00:00
fros4943
b9bf06c2a7
decreased default cooja CFS size
2010-02-05 08:59:51 +00:00
fros4943
a32035dc14
removing obsolete method previously used for estimating contiki's energy consumption.
2010-02-05 08:49:18 +00:00
fros4943
b749a560cc
removing obsolete method previously used for estimating contiki's energy consumption
2010-02-05 08:44:34 +00:00
fros4943
ef4881e8df
removing obsolete method previously used for estimating contiki's energy consumption
2010-02-05 08:24:57 +00:00
nifi
e64d9466eb
replaced relative path with portable path
2010-02-04 16:03:28 +00:00
nifi
86f6bbf61a
Removed obsolete mote class reference in simulation configs
2010-02-04 15:32:41 +00:00
adamdunkels
5e62a0dd20
Bugfix: the cxmac and lpp netperf tests didn't actually run cxmac and lpp
2010-02-04 08:02:09 +00:00
fros4943
dcacabf1ec
bugfix: byte were written from both queue and in response to uart state rx flag clearing, which caused byte to be corrupted
2010-02-04 00:30:26 +00:00
fros4943
ddf498a065
write command was removed from sky-shell, which requires a test update
2010-02-04 00:07:18 +00:00
oliverschmidt
f5004dca14
Adjusted the offsets of the file 'contiki.cfg' in the disk images. Should be more stable in the future now that the file is the first in all images.
2010-02-04 00:01:59 +00:00
oliverschmidt
26beba31ee
Added a (batch-type of) Makefile to create the various disk images making up "6502 Contiki".
2010-02-03 23:52:31 +00:00
oliverschmidt
821d24de4f
Added ProDOS 8 system program immediately returning to ProDOS. Thus allows to select between system programs if copied as first system program onto a ProDOS disk.
2010-02-03 23:44:56 +00:00
adamdunkels
83e823959f
Reverted previous change of the sky tools path: it was correct before
2010-02-03 22:01:08 +00:00
adamdunkels
c06526326c
Bugfix in the path to the sky linux tools
2010-02-03 21:55:09 +00:00
adamdunkels
028239e1a3
Added a timeout before the button is pressed, to allow it to initialize
2010-02-03 21:24:24 +00:00
fros4943
a13b6697df
explicit make clean before compiling firmwares
2010-02-03 21:16:13 +00:00
adamdunkels
2e7ade836e
Wait 1s before pressing the button to give the button sensor time to activate
2010-02-03 20:57:50 +00:00
adamdunkels
3746ffb4f1
Removed the energest-demo from the nightly builds since it is now moved to contikiprojects
2010-02-03 20:43:04 +00:00
fros4943
5d6a073655
bugfix: time event was initialized with null mote
2010-02-03 20:00:29 +00:00
fros4943
b832479e34
wrapping tr1001 custom data byte delivery in MspMoteTimeEvent
2010-02-03 19:30:32 +00:00
fros4943
cb34e9760f
wrapping serial byte input in a MspMoteTimeEvent
2010-02-03 19:17:30 +00:00
fros4943
74c003b7d4
wrapping tr1001 byte delivery in MspMoteTimeEvent:s, to avoid scheduling problems when emulated mote is in lpm
2010-02-03 19:15:56 +00:00
fros4943
510eb54494
wrapping cc2420 byte delivery in MspMoteTimeEvent:s, to avoid scheduling problems when emulated mote is in lpm
2010-02-03 19:15:15 +00:00
fros4943
31b9369dff
mspsim-specific time event that explicitly forces mspsim to synchronize its internal time to the current cooja time
2010-02-03 19:10:36 +00:00
fros4943
3786f2f5fb
introduced execute method with duration argument
2010-02-03 19:08:40 +00:00
adamdunkels
b3e0a2506f
Turned off CC2420 auto ack for the bridge
2010-02-03 16:48:54 +00:00
fros4943
a9e358eb9e
convert paths when saving configuration
2010-02-03 16:26:36 +00:00
fros4943
4776328731
fixed paths
2010-02-03 16:25:31 +00:00
fros4943
8f6026a92f
javadoc update
2010-02-03 16:06:04 +00:00
fros4943
0286e4115f
removed obsolete tick method
2010-02-03 16:04:44 +00:00
fros4943
182805a65d
title bug fix: mote may have several log interfaces
2010-02-03 15:55:50 +00:00
fros4943
778c14e9e3
javadoc update
2010-02-03 15:49:24 +00:00
fros4943
3aeaf86b1a
added a method for pausing the simulation that doesn't block
2010-02-03 15:33:36 +00:00
fros4943
a15f424753
added application-level mote (/tools/cooja/examples/appmote_rimeabc) to cross-level test
2010-02-03 15:22:58 +00:00
fros4943
6032f6508f
using application serial port
2010-02-03 15:11:48 +00:00
fros4943
3836b3e2e5
added simple serial port to be used by application motes
2010-02-03 15:11:28 +00:00
fros4943
0845bf18d7
printing on serial port instead of System.out
2010-02-03 15:10:55 +00:00
fros4943
1246174525
compile with nullmac + require all nodes to receive at least 3 messages before test ok
2010-02-03 14:14:57 +00:00
fros4943
36ab835973
+ calculates CRC for incoming packets (from cooja to cc2420). not yet checking outgoing packets for correct CRC
2010-02-03 14:07:45 +00:00
nifi
01502926d0
Better handling of cross-level radio packet. Minor code cleanup.
2010-02-03 13:47:33 +00:00
fros4943
e207f89307
added inter-byte delay for delivering cross-level packet bytes (250kbit/s)
2010-02-03 12:37:34 +00:00
fros4943
83fc001abd
show error dialog at simulation exception
2010-02-03 12:15:37 +00:00
fros4943
7025402510
removed unnecessary call to initEmulator (already called when the mote is first created)
2010-02-03 11:06:23 +00:00
fros4943
d8c32de4db
minor fix: avoid too wide dialog by printing each project on a separate line
2010-02-03 10:19:58 +00:00
fros4943
fd2a377666
avoid exception if rime address does not exist + removed obsolete methods
2010-02-03 10:14:46 +00:00
fros4943
1965dcf754
fixed misspelling
2010-02-03 09:58:07 +00:00
fros4943
1e203e1b77
updated plugin example to also save and restore configuration
2010-02-03 09:54:54 +00:00
fros4943
26e15fe4f1
added shortcut for logging to any file directly from test scripts
2010-02-03 09:32:25 +00:00
fros4943
8e11e600ec
hide exceptions if table input parsing fails
2010-02-03 09:30:38 +00:00
fros4943
50f09d7f85
removed warning for unrecognized configuration elements
2010-02-03 09:28:55 +00:00
fros4943
9b7706bc8f
removed obsolete energy consumption references + updated doc
2010-02-03 09:27:24 +00:00
fros4943
07e0eee1f7
application-level mote that imitates the behavior of Rime's anonymous broadcast example in /examples/rime/example-abc.
2010-02-03 09:25:52 +00:00
adamdunkels
b0db9cc588
Print informative message if radvd could not be restarted (instead of failing)
2010-02-01 11:54:07 +00:00
adamdunkels
6fd46e0582
Nightly tests for LPP and CXMAC duty cycling protocols
2010-01-31 20:29:56 +00:00
adamdunkels
fcd50868aa
Moved the TIMEOUT() definition until after the print_stats() definition so that the print_stats() function can be called when the TIMEOUT() is invoked
2010-01-31 19:18:26 +00:00
adamdunkels
da3a7ffbd8
Increase uIP buffer size for the bridge to accomodate for the Ethernet headers from the PC host
2010-01-28 13:49:24 +00:00
fros4943
440ffae2a0
new project: adds two new plugins for forwarding data between a socket and a simulated serial port
2010-01-27 14:28:26 +00:00
fros4943
31b9cf0ce4
patch for avoiding snprintf()-related compiler error
2010-01-27 12:54:31 +00:00
fros4943
15dd2bd88a
removed debug tooltip
2010-01-25 07:49:42 +00:00
joxe
940a2903f2
fixed interference in app radio
2010-01-24 23:16:17 +00:00
joxe
c0e7eb21bc
added LED to application motes
2010-01-24 22:24:36 +00:00
nifi
115ee7b936
Changed mote creation to always be done by the MoteType (allows application motes to be loaded with the right class loader)
2010-01-24 20:10:57 +00:00
nifi
7922108cbd
added support for multi-class application motes
2010-01-24 20:06:16 +00:00
joxe
123c612614
only deliver packets that are not null to app mote
2010-01-23 11:26:32 +00:00
fros4943
057750b109
test update: corrected write newlines, increased initial wait before issuing the first sendcmd()
2010-01-22 17:09:07 +00:00
fros4943
7c924089da
improved test: reading files with blocksize 13, verifying the complete file30.txt output, no newlines when writing mote commands
2010-01-22 16:57:56 +00:00
fros4943
8f296ac2fb
updated test: testing ESB<->Sky comm + improved test output
2010-01-22 13:56:42 +00:00
fros4943
de93c85292
increased esb helloworld test timeout
2010-01-22 13:12:31 +00:00
fros4943
bdda5f1c29
bugfix: rescheduling mspsim-based after breakpoint stops simulation + disabled automatic CLI "trace" at exceptions
2010-01-21 22:32:32 +00:00
fros4943
fa5f1f73ab
avoid java expection when debug pointer doesn't exist
2010-01-21 18:02:54 +00:00
fros4943
633405a73c
experimental debugging output interface for mspsim-based motes
2010-01-21 17:43:59 +00:00
fros4943
83be7a9fe0
updated default mac os x compiler configuration
2010-01-20 17:01:50 +00:00
fros4943
5470cb5bc3
+ script also includes the common data section
...
contributed by Lars Rasmusson @ SICS
2010-01-20 16:38:55 +00:00
fros4943
41142c4836
ContikiMoteType class methods were renamed
2010-01-20 16:29:15 +00:00
fros4943
efdb9f6e04
added support for a third optional memory section (currently only used on mac os x) +
...
added section address parsing debugging output +
removed unused code and + increased code readability
2010-01-20 16:21:36 +00:00
fros4943
27131dfa98
removed unused methods and code cleanup
2010-01-20 13:33:33 +00:00
fros4943
9a477a300c
contiki mote type: added additional regexps for parsing common section addresses
2010-01-20 13:27:02 +00:00
adamdunkels
ae3341691d
updated version of mspsim with bugfix in event scheduling
2010-01-19 20:34:52 +00:00
adamdunkels
5fc17c4f04
Small script for invoking indent for converting a C file into the Contiki code style
2010-01-18 13:28:28 +00:00
nvt-se
ca7f69d480
moved to a better place
2010-01-15 15:05:02 +00:00
fros4943
ec2b3c4086
spelling fix
2010-01-15 14:00:43 +00:00
fros4943
f371965755
bugfix: generated random seeds were not reloaded correctly
2010-01-15 14:00:06 +00:00
fros4943
758710cadd
cvs ignore for build directory
2010-01-15 10:57:42 +00:00
fros4943
760818260c
using new MotePlugin interface
2010-01-15 10:54:42 +00:00
fros4943
a2b6c39ac2
setFilter() and getFilter() methods made public
2010-01-15 10:54:05 +00:00
fros4943
34844188dd
added script example, demonstrating how to interact with surrounding cooja plugins
2010-01-15 10:52:55 +00:00
fros4943
d3f367ff58
statistics extraction public, to be accessible from other plugins and test scripts
2010-01-15 10:51:20 +00:00
fros4943
e16107b053
using MotePlugin interface, rather than object tagging
2010-01-15 10:47:36 +00:00
fros4943
61890416f5
removed obsolete object tagging methods on plugins, earlier only used by mote plugins
2010-01-15 10:46:53 +00:00
fros4943
bddc5ae132
introduced simple MotePlugin interface, to be used by all mote plugins
2010-01-15 10:46:12 +00:00
fros4943
6669b52c61
automatically ending transmission if radio hw is turned off
2010-01-15 10:44:26 +00:00
fros4943
515f5c7f78
removed warning when packet conversion failed
2010-01-15 10:43:02 +00:00
adamdunkels
51c8ff150e
'Set default' -> 'Save as default'
2010-01-15 10:09:23 +00:00
nifi
bca8104a86
Updated scheduling for user triggered events
2010-01-14 19:06:14 +00:00
nifi
684c91d0fd
Changed separator for concatenated mote id and log message for filtering to a space character.
2010-01-13 15:04:47 +00:00
nifi
313f857135
Enabled antialiasing in visualizer paint.
2010-01-13 12:29:10 +00:00
nifi
00d6ae56b6
Added option to filter on concatenated mote id and log message + removed compiler warnings
2010-01-12 15:42:08 +00:00
fros4943
8ee7b3c3be
minor fix: remove relations if mote is removed
2010-01-12 09:36:10 +00:00
fros4943
2756ff2e31
improved zooming by slider
2010-01-12 09:11:26 +00:00
matsutsuka
26ade836b4
synchronized with updated version; fixed Unix environment handling
2009-12-15 07:13:14 +00:00
fros4943
9ddc25527d
explicitly calling startPlugin and showPlugin methods, instead of relying on the plugin constructor to configure the plugin. if a simulation is loaded, startPlugin() is called after the simulation configuration is set
2009-12-14 13:29:35 +00:00
fros4943
32936c3df8
added method to select a log listener message near a given time, similar to timeline and radio logger methods
2009-12-14 13:25:04 +00:00
fros4943
cc252e5c16
added support for multiple msp command line listeners
2009-12-14 13:22:57 +00:00
fros4943
6940c85518
added: zoom in/out via ctrl +/-
...
removed: mouse tooltip (only appears when mouse is clicked)
2009-12-11 10:41:10 +00:00
fros4943
5660d6c168
bugfix: returned radio on during boot
2009-12-07 12:31:19 +00:00
fros4943
be1c818938
statistics bug fix: divide by number of motes + show time ruler at zoom in/out
2009-12-07 11:14:02 +00:00
fros4943
c1520a7134
added support for multiple log mote interfaces / mote
2009-12-07 11:06:08 +00:00
fros4943
5e251b837a
hide interfered radio events when radio is not on
2009-12-07 11:04:15 +00:00
fros4943
38e0b7918a
set radio interfered even when it is turned off -> cca is set immediately when radio is turned on
2009-12-07 11:03:19 +00:00
fros4943
9ec2b64008
added ESB helloworld test (cloned from Sky)
2009-12-02 17:16:57 +00:00
fros4943
5f88fac53c
renamed serial port mote interface SkySerial to MspSerial + replaced ESB's log mote interface with the new MspSerial (ESB motes can now read serial port data)
2009-12-02 17:12:32 +00:00
fros4943
36d09eaa69
requesting mote wakeup when receiving radio data + code cleanup (faster code)
2009-12-02 16:39:42 +00:00
fros4943
51f210b37f
removed unused and unneeded custom radio data classes
2009-12-02 16:29:36 +00:00
fros4943
2f9ccfa26d
merged mspsim's compile dialogs
2009-12-02 16:27:32 +00:00
fros4943
8bd7187491
the simulation object now handles the motetype configuration for motes; common functionality that was earlier implemented in each mote.
...
this patch allows the simulator more freedom for hand-picking mote class loaders
+ some debug output in experimental ImportAppMoteType
2009-11-27 15:53:10 +00:00
fros4943
236a6eee15
added new application mote type that loads a configurable application mote java class.
...
the new mote type makes it easier to create and load new application-level motes
2009-11-25 20:52:33 +00:00
fros4943
fa26d2f213
configure and load methods may throw a MoteTypeCreationException
2009-11-25 20:48:22 +00:00
fros4943
93672649d2
made project class loader public + throw exception is mote class could not be loaded
2009-11-25 20:47:18 +00:00
fros4943
ac424ca88a
bugfix: interfered nondestination radio
2009-11-25 18:13:05 +00:00
fros4943
7d6ee814da
added documentation
2009-11-25 16:05:47 +00:00
fros4943
ff93ba8e0f
decreased transmission interval and increased transmission duration of disturber mote, since short packets could still get through with the current settings
2009-11-25 16:03:00 +00:00
fros4943
d77d7ab667
updated mspsim.jar: implements cc2420's crc footer
2009-11-25 15:51:15 +00:00
fros4943
451be82efd
radio connection update: radio should not be removed from destinations, but instead flagged as interfered.
...
(and the radio medium will keep delivering data also to interfered destinations to avoid the half-filled RXFIFO problem)
+ minor fix: the received signal strength is the maximum of all sending radio
2009-11-25 15:49:58 +00:00
fros4943
5c67d113c8
minor bug fix: arraydequeue may return null entries
2009-11-25 15:44:51 +00:00
fros4943
3c4fe0e3b7
closing fileoutputstream
2009-11-25 15:43:45 +00:00
fros4943
24d0330d2d
radio connection update: radio should not be removed from destinations, but instead flagged as interfered
2009-11-25 15:43:03 +00:00
fros4943
45d23c026e
new radio medium method signature + increased history size
2009-11-25 15:40:46 +00:00
fros4943
0a9e9dea59
* observing motes' radio states ("is transmitting") instead of radio events ("started transmitting").
...
previously the last radio event was logged in the Timeline, which could be very confusing when a radio was interfered while transmitting a packet: it looked like the radio stopped transmitting. (this behavior did not, however, affect the simulation output but only the timeline)
* added Radio Logger menu option shortcut, for quickly moving from the Timeline to the Radio Logger plugin
* minor ui fixes regarding event tooltips: tooltip info appear at mouse clicks
2009-11-25 15:39:57 +00:00
fros4943
d27a2dfb5b
added Payload Alias for easier overview of several packets with identical payloads.
...
added Timeline menu option for quickly viewing the selected radio packet in the Timeline plugin.
2009-11-25 15:32:34 +00:00
fros4943
d4f674c053
updated obsolete method signature:
...
when the radio medium was still tick-based, several radio connection could finish "simultaneously" (during the same tick), which is no longer possible
2009-11-25 15:26:35 +00:00
fros4943
2955eb9798
distinct between a radio connection's interfered radios, and interfered destination radios: interfered destinations still receive connection data
...
+ faster code and updated documentation
2009-11-25 15:21:15 +00:00
fros4943
7e6fbd9f7b
output warning if radio shuts down during transmission
2009-11-25 15:18:11 +00:00
fros4943
01e9498dd9
radio medium update: receiving nodes that become interfered still receive connection data, but may (should) choose to ignore or corrupt it.
...
this solves a problem with half-filled FIFO buffers on CC2420 radio platforms
+ minor fixes: the received signal strength is the maximum of all active connection, and a transmitting radio may still be interfered
2009-11-25 10:36:08 +00:00
fros4943
5ed294f001
minor patch: remember last exported jar filename
2009-11-25 10:29:21 +00:00
fros4943
c0e115895d
when a receiving radio is interfered by another transmission, the actual data received is corrupted.
2009-11-25 10:01:55 +00:00
fros4943
cd8a407ee1
fix: mote id should not return memory value, but rather the configured value.
2009-11-25 09:17:16 +00:00
fros4943
857c7d5a9d
fixed integer to long wrap bug for simulation times over 2000s
2009-11-23 15:25:13 +00:00
nvt-se
a96e8a33b3
removed interference because it covered several hops and caused problems with x-mac broadcasts
2009-11-20 14:51:30 +00:00
joxe
65a50f3d88
fixed MicaZ ID for contiki nodes by programming EEPROM
2009-11-17 14:30:26 +00:00
joxe
f5ae0b9c82
fixed mote id for micaz
2009-11-17 14:09:02 +00:00
fros4943
445d6b6a72
test script bug fix: serial writes to motes should not include a newline.
...
the additional newline character was earlier (wrongly) dropped by the serial line module, but is now handled by the ringbuf-based serial line implementation
2009-11-14 11:52:03 +00:00
fros4943
8283ccf750
fixed cooja test info
2009-11-14 11:33:44 +00:00
fros4943
c869104e83
bug fix: schedule button events from simulation thread
2009-11-14 11:09:41 +00:00
fros4943
d71fe1d25f
added delay before starting ping process
2009-11-14 10:58:28 +00:00
fros4943
721a698a24
+ progress message type
2009-11-13 14:27:46 +00:00
fros4943
a3bd96f97e
show compilation warnings dialog after successful load + save config to history even if load fails
2009-11-13 14:25:43 +00:00
fros4943
29310addc5
improved timeline zooming
2009-11-13 13:01:13 +00:00
joxe
add9d2a387
added write to memory from COOJA + fixed byte ordering
2009-11-13 09:50:25 +00:00
fros4943
eded6497f2
removed dependency on mote interface getEnergyConsumption() method
2009-11-13 08:52:26 +00:00
fros4943
28f910b8d9
removed delay configuration option + lots of obsolete code from dialog
2009-11-13 08:51:23 +00:00
fros4943
977809144f
cleaning up after a removed simulation by the removed() methods +
...
exposing methods for loading simulations from external plugins +
minor bug fix: the reload progress dialog sometimes disappear even when a simulation is loading
2009-11-13 08:49:26 +00:00
fros4943
467cf88bcd
removed energyConsumption() method from mote interface: obsolete, we should instead interface Contiki's power profiler or MSPSim for better estimations
...
+
added stub removed() method: mote interfaces that need explicit cleanup should override this method
2009-11-13 08:41:06 +00:00
fros4943
499c3b8c26
removeDestination(Mote) method returns true is the argument mote was actually a destination (and hence was removed)
2009-11-13 08:38:45 +00:00
fros4943
a9eecb03df
strict event scheduling from simulation thread +
...
added method for removing mote types from a simulation +
added cleanup-methods for simulation/motes/mote interfaces: void removed();
2009-11-13 08:37:36 +00:00
fros4943
9c861b486d
minor fix: isTransmitting() flag should be true during transmissions + removed obsolete MSPSim setCCA interface
2009-11-13 08:32:01 +00:00
joxe
be313dd97d
improved support for MicaZ emulation - added variable watcher functionality
2009-11-12 12:49:34 +00:00
joxe
27bca64fe0
improved micaz emulation - supports radio on/off states + moved over to used common emulation classes
2009-11-10 12:56:20 +00:00
joxe
474698b36e
added common emulation classes for emulated motes
2009-11-10 12:54:39 +00:00
adamdunkels
d41a050310
Nightly test for the netperf shell command
2009-11-08 20:02:33 +00:00
fros4943
91a4322d2b
minor fix: show rime address when no IP address was found
2009-11-05 11:54:59 +00:00
nvt-se
9b801b59c7
Do not print error message for errno when showing the usage string. Use the same usage string in the two places where the usage is printed.
2009-11-03 14:00:28 +00:00
adamdunkels
78fd88d0ec
Print stats even when test fails
2009-11-03 09:27:11 +00:00
adamdunkels
01683428ea
Added missing functions to make the bridge code compile
2009-11-03 09:09:55 +00:00
fros4943
0b2cd19cac
removed debugging output
2009-11-02 13:18:27 +00:00
adamdunkels
0a12f6da77
Allow debugging output to be written from the bridge mote and be printed out by the tapslip6 program
2009-11-02 11:46:49 +00:00
fros4943
5bd2008def
minor fix: check that event is not already scheduled
2009-11-02 10:02:58 +00:00
nifi
a22348a496
Use canonical path to find parent directory when creating config relative path
2009-10-30 15:27:26 +00:00
fros4943
36eae6fcdf
micaz port now extends AbstractWakeupMote and schedules itself to execute every millisecond.
...
still no memory access, so simulation of micaz motes remains limited
2009-10-30 09:42:50 +00:00
fros4943
a45aa8e89c
minor changes in executable jars: removed jdk dependency on simulating computer + temporary files from simulation are stored in a subdirectory + temporary files from building the jar are removed when done
2009-10-29 17:05:13 +00:00
fros4943
b4a4572d97
added help method for reading from streams
2009-10-29 16:48:50 +00:00
fros4943
54ac5bc64e
added two example scripts
2009-10-29 14:39:08 +00:00
fros4943
62c8535678
bugfix: radio medium should reset last connection data before notifying observers that a new connection has begun
2009-10-29 10:31:55 +00:00
fros4943
53b6e0e7fa
new feature: generate executable jar from current simulation
...
useful for preparing a simulation, and then running it elsewhere without having to configure cooja
2009-10-29 10:17:15 +00:00
fros4943
4c7ef8b022
added experimental feature: generate executable JAR from current simulation
...
+ made some methods public for accessing configuration state etc from outside the GUI class + minor bug fix in reparse projectes method
2009-10-29 10:16:05 +00:00
fros4943
bc0d46a966
added "ant help" target, with build executable simulation example
2009-10-29 10:13:46 +00:00
fros4943
7f1d5c90d6
added method for writing text to files
2009-10-29 10:10:22 +00:00
fros4943
82b8006c0c
using MoteTimeEvent instead of TimeEvent: scheduled events are automatically removed when the mote is removed
2009-10-28 15:58:42 +00:00
fros4943
281639c779
fixed potential memory leak when motes are removed during a simulation
2009-10-28 15:42:03 +00:00
fros4943
a4226e14c5
fixed potential memory leak when motes are removed during a simulation
2009-10-28 15:34:34 +00:00
fros4943
51130cea80
fixed potential memory leak: did not unregister mote observer if the mote was removed from the simulation while the skin was active
...
+
added ability to copy mote IP addresses to clipboard
2009-10-28 15:16:21 +00:00
fros4943
5650e818ec
abstract application mote, used for implementing application-level motes, now extends wakeup mote.
...
+ reimplemented disturber mote using abstract application mote
+ removed obsolete dummy mote example
2009-10-28 14:38:02 +00:00
fros4943
cb04423a57
added default methods for saving and restoring the mote id
2009-10-28 14:35:10 +00:00
nifi
c51956bc8c
Minor fix with config relative path and allow external tools editing with specified Contiki path.
2009-10-28 13:37:29 +00:00
fros4943
be230d4d37
exporting paths relative to contiki, not cooja
...
+ new project management api
2009-10-28 12:07:37 +00:00
fros4943
226a41abbf
throw exception if project directory or config file does not exist
2009-10-28 12:05:43 +00:00
fros4943
8e1de297d5
new dialog api + removed lots of obsolete code
2009-10-28 12:03:48 +00:00
fros4943
175e39a3d2
remember last source file used relative to current contiki
2009-10-28 12:02:21 +00:00
fros4943
edd94c00b0
increased timeout to 80sec (new mspsim is more accurate emulating flash memory timing)
2009-10-27 15:47:37 +00:00
fros4943
fc83caf42a
updated mspsim.jar with timer bugfix (div by zero)
2009-10-27 14:43:51 +00:00
fros4943
c5dd2726f3
removed debug output
2009-10-27 10:36:01 +00:00
fros4943
5c2fd30afb
disabled micaz clock until new wakeup interface is implemented
2009-10-27 10:20:25 +00:00
fros4943
2911ea483b
jipv6 jar path fix
2009-10-27 10:19:07 +00:00
fros4943
29f618836f
new radio medium api
2009-10-27 10:14:09 +00:00
fros4943
2d7e188c77
using mspsim's new window manager, not fully implemented yet
2009-10-27 10:13:34 +00:00
fros4943
38dcc8ed93
extending abstract wakeup mote
2009-10-27 10:12:33 +00:00
fros4943
ed8867bcb5
new event scheduling api
2009-10-27 10:11:17 +00:00
fros4943
a81f216acb
radio medium patch: udgm uses hash table for efficient lookup in large networks + minor patches to dgrm
2009-10-27 10:10:03 +00:00
fros4943
59e1c464e7
introduced new abstract mote classes:
...
AbstractWakeupMote shared functionality common to both contiki-based and mspsim-based motes
2009-10-27 10:07:56 +00:00
fros4943
64293abe03
major update to cooja's event scheduler:
...
* all events must now be scheduled from the simulation thread
* added new methods for requesting simulation thread execution
this patch solves some race conditions introduced by the new mspsim execution scheduling, but affects many existing plugins and interfaces
2009-10-27 10:06:59 +00:00
fros4943
4715637b38
major update to mspsim-based emulated mote:
...
* fully event based scheduling instead of previous event-tick-hybrid model
->
* faster emulation of large mspsim-based networks
* enables variable clock frequency (no longer fixed to 3.9 Mhz)
2009-10-27 10:02:48 +00:00
fros4943
ae9aaea5f3
added build dependcy jipv6.jar
2009-10-27 09:58:18 +00:00
fros4943
639121f835
updated mspsim.jar, with dependency jipv6.jar and autorun script
2009-10-27 09:57:44 +00:00
fros4943
a344925b50
added methods for writing and reading byte array from files
2009-10-27 09:52:24 +00:00
fros4943
6100734897
added convenience method for accessing active plugins
2009-10-27 09:31:22 +00:00
fros4943
8b136c0b35
removed obsolete until method
2009-10-27 08:52:49 +00:00
adamdunkels
61f16ae6cb
Configure RF channel to be the same as the default Contiki sky channel
2009-10-26 13:34:08 +00:00
adamdunkels
fca2cfc919
radvd configuration file for linux
2009-10-26 13:20:57 +00:00
adamdunkels
2b54d1f1b4
Added make targets that help to setup the SLIP IPv6 bridge
2009-10-26 13:20:31 +00:00
fros4943
1dba4d40ca
minor fix for non-GUI simulations: stop simulation and clean-up before shutting down COOJA
2009-10-23 11:55:53 +00:00
fros4943
4c1706bebb
do not show dialog unless COOJA is visualized
2009-10-21 16:43:24 +00:00
fros4943
15c4cdaa3e
on non-windows platforms: manually entering simulated gateway arp address
...
+ minor updates: introduced network interface wrapper class , extending vis plugin, showing number of bytes forwarded between native and simulated network (not just number of packets)
2009-10-20 09:22:07 +00:00
adamdunkels
b4be72be7d
Removed use of NULLMAC
2009-10-19 21:42:39 +00:00
adamdunkels
1b26fcd5c7
Increased timeout
2009-10-19 20:50:16 +00:00
adamdunkels
4ef2f4f6b5
Reduced interference range
2009-10-19 20:48:43 +00:00
adamdunkels
f9d00bc8bf
Reduced the number of packets that needs to be received
2009-10-19 20:47:28 +00:00
fros4943
d8f31b6630
check that radio connection is non-null when painting radio traffic history
2009-10-19 17:37:50 +00:00
fros4943
1c4b6afea3
minor feature: show mouse drag distance (in time) from mouse press
2009-10-19 17:36:28 +00:00
fros4943
9d7275db7e
added option to limit the number of messages in list
2009-10-19 17:33:25 +00:00
fros4943
2bc52699c6
bugfix: removed-flag should become false when rescheduling unsorted event
2009-10-19 17:32:38 +00:00
fros4943
b144b78478
increased slip data buffer size
2009-10-19 17:31:13 +00:00
oliverschmidt
644d637530
cc65 2.13. supports 'native' ProDOS 8 system programs. So LOADER.SYSTEM doesn't act as resident shell anymore but works now as pure loader.
2009-10-18 10:01:40 +00:00
oliverschmidt
d8aee18f6c
cc65 2.13. allows to
...
- explicitly set 80 column mode
- control exit behaviour from the program itself (instead of requiring a loader variant).
2009-10-18 09:37:37 +00:00
fros4943
2c1b7013d5
by request: added mote type visualizer skin
2009-10-16 13:14:53 +00:00
fros4943
92eecd3e38
added method for more easily accessing the coffee filesystem interface
2009-10-08 14:41:20 +00:00
adamdunkels
5dd7f44162
Increased the transmission time to 40 seconds from 20 seconds
2009-10-02 09:10:08 +00:00
nifi
1f9642039e
increased timeout due to better timing in new version of MSPSim
2009-09-28 09:46:54 +00:00
nifi
51cbcd9193
minor bug fix: enforce string to avoid merging mote ids
2009-09-24 08:56:17 +00:00
fros4943
21d1c5e939
added experimental functionality for mapping between debug info paths and real source locations.
...
useful when the firmware is not compiled on the cooja computer, or when the source files have been moved after compilation.
this functionality is not yet saved with simulation configs
2009-09-23 08:22:36 +00:00
fros4943
25767a1f0f
faster repaint for large source files
2009-09-23 08:16:06 +00:00
nvt-se
fc34a4572b
Removed the deprecated COFFEE_DIR_CACHE_ENTRIES parameter.
2009-09-22 16:31:36 +00:00
fros4943
88b4e22aad
fixed executable path
2009-09-18 16:45:26 +00:00
fros4943
0beda36034
show progress dialog during minimal-net compilation
2009-09-18 16:38:15 +00:00
fros4943
0c4dc6fc6b
start plugins in non-dispatcher thread
2009-09-18 16:13:31 +00:00
fros4943
d9f3e2b05f
bugfix: restoring path from wrong source when loading msp mote type
2009-09-18 09:26:22 +00:00
fros4943
dc07c1ad26
debug info before loading ELF file
2009-09-18 09:06:15 +00:00
fros4943
fcfb68e329
added micaz port hello world test
2009-09-17 14:00:50 +00:00
fros4943
e974b896dc
removing unsafe MoteID interface dependencies
2009-09-17 13:19:08 +00:00
fros4943
87aa2c2aad
bug fix: z-coord was not painted + some (even) positions caused errors
2009-09-17 12:38:04 +00:00
fros4943
ca0f2c91c8
paint both actual transmission range (depends on current tx power), and the maximum value as configured in the radio medium
2009-09-17 12:10:28 +00:00
fros4943
f144b012b9
changed default tx power to maximum
2009-09-17 12:09:14 +00:00
fros4943
b526851ac1
added getID() stub to avoid compiler errors: the application motes does not yet respect the configured mote IDs
2009-09-17 11:12:25 +00:00
fros4943
b2ea7ba9b2
removed reference to potentially non-existing mote ID interface: the mote getID() method should instead be used
2009-09-17 11:07:58 +00:00
fros4943
8116da5c4e
removed mote state references
2009-09-17 11:06:35 +00:00
fros4943
62287dcb03
implements mandatory getID() method
2009-09-17 11:05:56 +00:00
fros4943
72105a161e
added getID() method (mandatory for all motes)
...
removed the common state notion: these are instead mote specific
2009-09-17 11:05:09 +00:00
fros4943
eb4698612d
minor changes: removing some unused code, restructuring, added getID() methods
2009-09-17 10:50:11 +00:00
fros4943
969154c6f0
added some basic functionality for cooja motes like save/load support, compile dialog, and configurable mote interfaces. some parts are still missing (memory r/w access and mote IDs)
...
+
code restructuring preparing for a generic emulated mote type layer in cooja (made avrora-based motes look more like mspsim-based motes)
2009-09-17 10:45:13 +00:00
fros4943
edae45a101
added visualizer quick help
2009-09-15 11:26:39 +00:00
oliverschmidt
61929d7a3c
Updated from Loader 1.3 to Loader 1.4.
2009-09-13 19:05:52 +00:00
zdshelby
fc237101be
- Added the Sensinode platform programming tools to /tools
2009-09-09 09:48:16 +00:00
nvt-se
b5295fef10
use PATH_MAKE when compiling Contiki mote types. doesn't work on BSD systems
...
otherwise.
2009-09-07 15:05:05 +00:00
fros4943
eacda19281
support for extracting very simple statistics from observed events
2009-08-27 16:38:09 +00:00
fros4943
a69c8f03fe
minor update: sorting variables by name + decreased default plugin size
2009-08-27 14:38:57 +00:00
fros4943
39aeb2f150
visualizer skin updates: broke out traffic visualization from the udgm radio medium skin (the stand-alone traffic skin can be used with any radio medium), added a simple background grid skin and a mote position skin
2009-08-27 13:59:47 +00:00
fros4943
23f13a2b6f
visualizer plugin major update: support for zooming and panning, hiding window decorations, and a more powerful visualization skin api
2009-08-27 13:57:42 +00:00
nvt-se
b8e268e598
Added FreeBSD support.
...
Made the Sky mote type use PATH_MAKE for the build procedure.
2009-08-27 12:25:11 +00:00
oliverschmidt
5fcb9613be
Changed Contiki IPv4 address to 10.1.1.1 to allow for out-of-the-box testing in emulators with Ethernet support bound to a loopback interface (see Contiki Wiki article "Capturing loopback traffic with Wireshark").
2009-08-24 20:28:16 +00:00
fros4943
d13f47a64f
bugfix: clock drift must be set even when the random startup delay is zero
2009-08-20 13:10:35 +00:00
fros4943
91e762b7bc
bugfix: do not assume that the debugged mote is compiled from source
2009-08-20 12:52:17 +00:00
nvt-se
f78c9d6a20
fixed error: -e arg should be checked
2009-08-13 12:15:35 +00:00
nvt-se
9ab5859421
added platform configuration argument.
2009-08-13 12:11:20 +00:00
fros4943
3847927a43
including the coffee manager JAR in build system and project directory
2009-08-12 07:41:30 +00:00
fros4943
cdcf783ac6
coffee manager mote interface for sky motes
2009-08-11 17:09:16 +00:00
fros4943
8fcff235e2
optional ant build.xml for building the coffee jar file
2009-08-11 17:04:31 +00:00
fros4943
b4f3cce790
minor changes for allowing coffee manager access from cooja
2009-08-11 17:03:59 +00:00
nvt-se
c154985d7e
load configuration from the JAR
2009-08-11 14:42:58 +00:00
nvt-se
7d25016895
added ESB platform properties and made build.sh include properties files in
...
the JAR.
2009-08-11 14:21:28 +00:00
nvt-se
1c52dfefef
read the bytes of a full region from the original file if the log record doesn't exist.
2009-08-10 12:56:13 +00:00
nvt-se
9d030cad2c
added support for extracting micro logs
2009-08-10 12:51:52 +00:00
nvt-se
a4f7f33b74
simplified the argument interface. cleaned up some code
2009-08-04 15:19:07 +00:00
nvt-se
6612a77d66
only include class files.
2009-08-04 14:49:52 +00:00
nvt-se
44772060af
removed debug output
2009-08-04 10:39:13 +00:00
nvt-se
0f1f50d9c8
Add a managment tool for Coffee file system images.
2009-08-04 10:36:53 +00:00
joxe
68ba32eaee
added autoack config for bridge
2009-07-28 21:34:13 +00:00
dak664
3869a3b212
Remove coffee page size option, not used
2009-07-23 16:16:54 +00:00
dak664
31253a29a1
Generalize to coffee files, data attributes, includes
2009-07-20 19:18:36 +00:00
dak664
450aa16a5b
Added input args and optional complemented output
2009-07-15 22:06:23 +00:00
dak664
97e258814c
Configured for 1284p Raven webserver
2009-07-14 19:25:46 +00:00
nifi
e8c11209da
added notification to model when removing events
2009-07-06 14:04:21 +00:00
fros4943
091bdb080f
+quickhelp for control panel
2009-07-06 12:54:42 +00:00
fros4943
28976d9e15
allow simulation delays below real-time
2009-07-06 12:29:57 +00:00
fros4943
d5a7a18145
more debugging output + minor refactoring
2009-07-03 14:06:20 +00:00
fros4943
739e21caaf
+ support for configurable buffer sizes (currently only for log output events)
2009-07-03 13:37:40 +00:00
fros4943
d282c70572
using event central for keeping track of simulation motes + for sharing log output events among different log listeners.
...
note that at least one log listener plugin must be kept opened, otherwise the event central will clear the history
2009-07-02 12:07:18 +00:00
fros4943
47bf1de4ca
using event central for keeping track of simulation motes
2009-07-02 12:05:24 +00:00
fros4943
9b164adc35
method for accessing event central + include mote when notifying simulation observers that a mote was added/removed
2009-07-02 12:04:28 +00:00
fros4943
f13a313a7d
event central used for simplifying plugin implementations: a plugin can listen for simulation-wide mote interface changes via this class, and does not need to keep track of added/removed motes.
...
in addition, the event central may be configured to keep an event history of selected mote interface events, useful for sharing events among several different plugins
2009-07-02 12:03:09 +00:00
fros4943
fe0f03a5fd
help methods for manipulating arrays
2009-07-02 11:58:37 +00:00
nifi
ac11dc90d8
only reload with new seed if simulation exists
2009-06-30 13:31:42 +00:00
nifi
adbe225132
removed unused import
2009-06-30 13:10:14 +00:00
fros4943
5e1afdbc92
quick help for log listener and time line pluging + keyboard shortcuts
2009-06-30 12:47:00 +00:00
fros4943
5a053d7d4e
added quick help
2009-06-30 12:46:26 +00:00
fros4943
bed44c8f55
made desktop scrollable + added quick help pane (keyboard F1)
2009-06-30 12:45:51 +00:00
nifi
1cdbda249a
enable routing for test (UIP_CONF_ROUTER is now disabled by default for platform sky)
2009-06-29 09:58:14 +00:00
adamdunkels
d98de28966
README file for the contents of the release-tools directory
2009-06-26 19:56:33 +00:00
fros4943
eb964b9dc6
added make clean + added an extra compilation command with CORE enabled
2009-06-26 13:56:20 +00:00
fros4943
a4bc10edfa
+ verifies the base64 encoded executable stored in flash
2009-06-26 13:26:48 +00:00
fros4943
242d8edf03
more debugging output when test fails
2009-06-26 11:30:36 +00:00
fros4943
964f63645b
more debugging output
2009-06-26 09:28:45 +00:00
fros4943
4525bcb8f0
added shutdown hook for make sure the minimal-net application is killed when cooja exits without shutting down all plugins
2009-06-25 17:43:13 +00:00
fros4943
e36479f0b5
added mote separator background colors + painting LED events as three thin lines (RGB) instead of in a single color
2009-06-25 16:44:08 +00:00
fros4943
124380e354
more efficient toggle warnings implementation + listen to all popup triggers
2009-06-25 15:46:57 +00:00
fros4943
c66b8422ee
bug fix: RUN_TEST removed the aggrerated log + simplified code
2009-06-25 11:10:50 +00:00
nvt-se
c1b2607161
removed deprecated WITH_NULLMAC setting for IPv6.
2009-06-24 16:32:45 +00:00
fros4943
2a5781566f
moved test scripts into simulation config (.csc)
2009-06-24 14:42:50 +00:00
fros4943
28a9b815b5
minor script updates
2009-06-24 14:41:47 +00:00
fros4943
e6fa5334ae
print random seed and end time to all test logs
2009-06-24 14:08:14 +00:00
fros4943
25893c463e
minor fixes: allow copy to clipboard and output to console when hinding stdout + always show the last output
2009-06-24 14:07:19 +00:00
fros4943
b70f013ab4
added support for hiding normal output, only showing warnings/errors
2009-06-24 12:41:05 +00:00
fros4943
5d20b01f04
bugfix: random generator was initialized differently at load vs reload
2009-06-24 07:56:15 +00:00
fros4943
e353666550
removed regexp filtering on time column
2009-06-23 12:57:19 +00:00
dak664
e7bc9f20a2
Put strings in PROGMEM, strip CRLF in text files only
2009-06-19 17:12:35 +00:00
adamdunkels
81786900f2
Makefile for automated nightly building of example code
2009-06-18 08:42:08 +00:00
adamdunkels
4c22ef33d0
Moved compile-platforms from examples/ to tools/release-tools
2009-06-18 08:40:57 +00:00
fros4943
532c1b6c77
bugfixes: recalculate executable address after loading breakpoint + iterate over array, not list
2009-06-17 13:06:55 +00:00
fros4943
f086c92b40
implemented saving current flash memory
2009-06-17 13:05:27 +00:00
fros4943
563a9f1b8e
added target that instructs the jvm to show a message box at errors, useful for debugging Contiki nodes
2009-06-16 17:06:02 +00:00
fros4943
34584fc05e
show watchpoint colors and use a fix watchpoint event width
2009-06-16 12:16:02 +00:00
fros4943
752e80167b
added breakpoint colors and user defined messages
2009-06-16 12:15:15 +00:00
fros4943
ebb47546a2
replaceFirst() also for Contiki relative paths + verify that the generated config path is valid
2009-06-15 18:13:45 +00:00
fros4943
d7b35b5b40
bugfix: only replace the first instance when generating portable paths (simulation configs)
2009-06-15 17:43:48 +00:00
fros4943
9dd0e076a6
GENERATE_MESSAGE() argument in milliseconds
2009-06-15 17:39:02 +00:00
fros4943
32ac82fc22
added debugging output + generated javascript code tooltip
2009-06-15 16:53:32 +00:00
fros4943
67bca87c1d
bugfix: remove unsorted time event
2009-06-15 16:51:42 +00:00
fros4943
a45e2382b2
bugfix: do not activate script engine according to simulation config in test mode (without GUI), instead, always keep it activated
...
+ more debugging output
2009-06-15 15:41:32 +00:00
fros4943
4c4cdeb546
schedule wakeup after new data has been written
2009-06-15 14:40:28 +00:00
fros4943
244d780809
support for character arrays + various UI updates, contributed by Kasun Hewage.
2009-06-15 11:59:21 +00:00
fros4943
4a4630d9ec
added menu options: copy to clipboard and save to file
2009-06-15 10:53:24 +00:00
fros4943
3c7d0329ef
minor fixes: integer wrap in repaint method + check watchpoint cast
2009-06-15 09:47:05 +00:00
fros4943
e8ca6d4a4e
+ shortcut for registering identical breakpoints for all motes of a particular mote type (currently only in popup menu)
2009-06-15 09:45:46 +00:00
fros4943
4fecf3fe1e
moved handling of breakpoint configs from plugin to mote
2009-06-15 09:44:42 +00:00
fros4943
61885eba09
added menu options: copy to clipboard and save to file
2009-06-15 08:34:51 +00:00
fros4943
e7a6df77f3
directly call java script method instead of parsing GENERATE_MESSAGE calls
2009-06-12 15:12:46 +00:00
fros4943
1d504be38c
no source code repaints while simulation is running
2009-06-12 15:11:22 +00:00
nifi
e7c13890ee
log listener plugin update: support for regexp filtering + nicer ui
...
+ minor tooltip fix in radio logger
2009-06-12 14:34:29 +00:00
nifi
b2c0df08af
radio logger update: autosizing columns + support for new microsecond resolution + some minor fixes
2009-06-12 14:12:59 +00:00
nifi
be03c380c5
Show config file when reloading
2009-06-12 13:00:57 +00:00
nifi
2c4f9b50f8
cvs ignore for generated jars
2009-06-12 12:42:32 +00:00
fros4943
3b25d8b5e4
no stack trace printout when a visualized plugin fails to in test mode
2009-06-11 10:23:29 +00:00
fros4943
8842b700a7
ui updates + extracted code to external classes
2009-06-11 10:12:44 +00:00
fros4943
12ee67171b
mspmote is now a watchpoint mote + mspmote is responsible for parsing and providing firmware debugging info
2009-06-11 10:08:12 +00:00
fros4943
a8aa75fa8d
updated code watcher user interfaces: added support for disabling breakpoints without removing them + several minor fixes
2009-06-11 10:06:47 +00:00
fros4943
c19c8a16ad
mspsim breakpoint wrapper with source code information (part of the code was extracted from the code watcher plugin)
2009-06-11 10:05:28 +00:00
fros4943
a39b87f214
implemented watchpoint visualization +
...
saving current zoom and divider locations in simulation configs
2009-06-11 10:02:53 +00:00
fros4943
b63322ebb1
added simple watchpoint interfaces, currently only implemented on mspsim motes
2009-06-11 10:02:11 +00:00
fros4943
8a44b78934
+ startPlugin method throws exceptions
2009-06-10 15:57:08 +00:00
fros4943
1a2084b597
minor etimer code cleanup
2009-06-09 19:38:38 +00:00
fros4943
1776fb0449
bugfix: if timer expired but was not yet handled due to long running operations (such as radio transmits), warn and reschedule timer handling later
2009-06-09 19:12:30 +00:00
fros4943
8b01f0e3aa
cooja runtime arguments updated
2009-06-09 09:49:14 +00:00
fros4943
24897fb71f
two simple example scripts
2009-06-09 09:47:50 +00:00
fros4943
02733e15ab
made test editor plugin a simulation plugin: it now depends on a specific simulation
...
this change enables multiple simultaneous scripts in a simulation, and also makes it easier to create tests since they will be stored with the simulation config
since the plugin now depends on a simulation it is no longer possible to create/reload simulations from the test scripts (this was however not often used)
2009-06-09 09:47:04 +00:00
fros4943
5bac672099
added help methods for reading text files from disk
2009-06-09 09:42:01 +00:00
fros4943
efe1bb9cff
warn if Contiki has an event timer scheduled to the current time, which has for some reason not been executed
2009-06-08 13:07:54 +00:00
fros4943
646fb6fec0
bug fix: delay field is in milliseconds, not microseconds
2009-06-08 12:42:58 +00:00
fros4943
24f00bce76
reload simulation bug fix (lost edges) + removed some debugging output
2009-06-08 12:42:10 +00:00
fros4943
6e26f08c15
+ automatically add/remove simulation motes
2009-06-08 11:55:58 +00:00
fros4943
c6c7c51c10
generate random mote type identifiers
2009-06-03 17:27:37 +00:00
fros4943
7ada9705a4
show dialog at script errors
2009-06-03 17:26:31 +00:00
fros4943
7877d54e1e
bugfix: mote plugins should use the start plugin action
2009-06-02 15:04:49 +00:00
fros4943
af0c20e00d
extend SerialUI to avoid code duplication
2009-06-02 09:34:59 +00:00
fros4943
9ea673f3be
minor fix: always show start of lines
2009-06-02 09:34:12 +00:00
fros4943
cdf4bfd4f8
gui action fix: do not directly change isEnabled() from the simulation thread
2009-05-28 14:53:26 +00:00
fros4943
e54e0db966
bugfix: non-simulation plugins menu items need separate action listeners
2009-05-28 13:45:18 +00:00
fros4943
c9e97fd1ae
fix: only toggle actions state in visualized mode + documentation
2009-05-28 12:59:02 +00:00
fros4943
02b5d5e230
gui update: enable menu items depending on whether a simulation is loaded or not
2009-05-28 12:55:14 +00:00
nifi
efbae10245
Load last opened simulation configuration file when reloading without simulation.
...
Added key shortcuts to last opened files.
2009-05-27 23:23:41 +00:00
fros4943
0f924ed2dd
fix: report test success by log.testOK()
2009-05-26 14:52:09 +00:00
fros4943
6ddc3642bf
fix: Contiki path printout
2009-05-26 14:36:26 +00:00
fros4943
b143dbe4b2
example updates
2009-05-26 14:34:43 +00:00
fros4943
e238d84a75
milliseconds -> microseconds update + removed dependency of radio interface
2009-05-26 14:34:30 +00:00
fros4943
1c22bf5151
event based mote interfaces + reimplemented cross level functionality for TR1001
2009-05-26 14:33:30 +00:00
fros4943
c59fc91487
milliseconds -> microseconds update
2009-05-26 14:31:07 +00:00
fros4943
62db437c2d
minor bugfixes + added zoom functionality
2009-05-26 14:30:20 +00:00
fros4943
7985a9310b
milliseconds -> microseconds update + more effective repainting using swing timers (avoid AWT event floods)
2009-05-26 14:27:00 +00:00
fros4943
e5219e0d8b
better description
2009-05-26 14:25:29 +00:00
fros4943
cf9b7b76fe
milliseconds -> microseconds update
2009-05-26 14:25:07 +00:00
fros4943
d996ae1476
event based mote interfaces: less dependencies on tick polling + using new mote time events
2009-05-26 14:24:20 +00:00
fros4943
fba3701a86
contiki mote schedules their next wakeup based on Contiki etimers + removed notion of active vs LPM state (optimization no longer needed)
2009-05-26 14:21:20 +00:00
fros4943
a327180762
new help class: time event associated with (or scheduled from) a mote. if the mote is removed during simulation, this enables removing all its scheduled events
2009-05-26 14:19:17 +00:00
fros4943
633f9bb5ef
radio medium updates: removed obsolete tick observer + notifying observers for each finished radio connection separately
2009-05-26 14:17:29 +00:00
fros4943
61c2ed2e1a
two major updates:
...
simulation time now uses microsecond resolution instead of earlier millisecond (allows for better simulation accuracy)
+
Contiki motes schedule their own events instead of the earlier approach of having the simulation loop register tick events common to all Contiki motes (faster simulation)
both changes require extensive changes throughout COOJA
2009-05-26 14:15:41 +00:00
fros4943
300f3396ac
allow contiki motes to handle several contiki events each tick + corrected variables types
2009-05-26 14:08:51 +00:00
fros4943
990aa93d57
setting timeline plugin as default
2009-05-26 14:07:19 +00:00
fros4943
a5ec895bf7
updated cross level test: bug fix + more debug info
2009-05-26 14:05:35 +00:00
fros4943
1b937d8287
added static connection ID for debugging purposes
2009-05-26 13:37:26 +00:00
fros4943
7c2e0a4b48
added method for peeking at first scheduled event
2009-05-26 13:36:36 +00:00
fros4943
a8e66853bc
updated cc2420 converter to 6 byte xmac headers
2009-05-26 13:33:35 +00:00
fros4943
1fdd19079f
catch exceptions thrown from script threads
2009-05-20 14:11:21 +00:00
fros4943
bd2ac3991a
show also converted packet data in tooltip
2009-05-20 12:02:06 +00:00
fros4943
f181ba6f7d
moved obsolete cooja projects to backyard
2009-05-18 14:48:10 +00:00
fros4943
88368b7c91
quick hack for storing logged events to file
2009-05-18 14:24:25 +00:00
nifi
4d38657502
setup skin from event dispatcher
2009-05-18 13:57:51 +00:00
fros4943
78979dba0d
test update: verify base64 data uploaded via serial port
2009-05-18 10:19:34 +00:00
fros4943
49520f6f38
script for running several repeated tests
2009-05-18 09:08:48 +00:00
fros4943
fa4a22412a
test update: delay a few seconds before pinging the node
2009-05-18 08:03:40 +00:00
adamdunkels
8bfb856220
Enable NAT on both tap0 and tun0, and set the outgoing interface to eth10 which seems to be the default on instant-contiki
2009-05-12 17:24:04 +00:00
adamdunkels
4855d0325c
Small script for setting up NAT on Ubuntu (probably works on other linuxen too)
2009-05-11 07:01:54 +00:00
joxe
890eb830e8
ipv6 bridge between 802.15.4 and ethernet - over USB/SLIP - use with sliptap6
2009-05-08 12:49:36 +00:00
joxe
8e08bc085c
added tapslip6 for ipv6 connectivity over USB/SLIP/ethernet - use together with uip6-bridge
2009-05-08 12:37:34 +00:00
adamdunkels
53a0c0a300
Draw 0-width radio events as one pixels wide to show all transmissions
2009-05-06 15:00:06 +00:00
fros4943
0f57afa2b3
bugfix: the preamble and synchbytes was shown instead of the payload (including 2 footer bytes)
2009-05-06 12:59:12 +00:00
fros4943
18b2392e48
minor fix: avoid repaint flicker by directly setting scroll coordinate
2009-05-04 16:03:35 +00:00
fros4943
ad2c952810
new cooja timeline plugin.
...
still experimental and under development, therefore not yet enabled by default
2009-05-04 15:38:35 +00:00
fros4943
8fc7bc10cd
bugfix: make sure destination has not already been removed from connection
2009-05-04 15:34:28 +00:00
fros4943
316f154c1f
notify when radio HW is turned on/off
2009-05-04 15:34:00 +00:00
fros4943
09409fc5a7
fixed last commit regarding "run_bigmem": some windows systems cannot allocate more than 1500mb maxmemory
2009-04-30 08:16:34 +00:00
fros4943
b22cfd88bd
increased maximum heap memory
2009-04-30 07:46:17 +00:00
fros4943
dbd5f095e4
new default clock frequency for Contiki's sky motes: 3.9MHz
2009-04-29 20:04:56 +00:00
adamdunkels
3c68862599
Make wpcapslip compile with current uip headers
2009-04-29 11:56:14 +00:00
fros4943
330b5275a1
bug fix: bytes were not displayed correctly (signed)
2009-04-28 07:33:09 +00:00
fros4943
3aac9a49ce
bug fix: last address bytes were not displayed correctly (signed)
2009-04-28 07:29:26 +00:00
fros4943
332d1f45c0
running test with simulation delay to avoid test timeout while external ping process has not finished
2009-04-23 10:53:32 +00:00
fros4943
964310303d
cloned sky ip ping test, but for contiki motes
2009-04-23 10:43:16 +00:00
fros4943
382d69ed5d
release semaphores before stopping simulation (may deadlock)
2009-04-23 10:41:35 +00:00
fros4943
921ceabb50
implemented writeArray() and writeByte() for Contiki serial interface
2009-04-23 09:17:01 +00:00
fros4943
11879f210c
improved debug output
2009-04-23 08:59:22 +00:00
fros4943
2768a96b9b
minor fixes: remember last used test, respect maximum window size etc
2009-04-23 08:54:10 +00:00
fros4943
3a6e561ea8
better button description: "Stop" -> "Pause"
2009-04-23 08:48:01 +00:00
fros4943
997a5f6983
reverting previous accidental commit
2009-04-21 20:46:02 +00:00
fros4943
4790ff8f74
increasing loop symbols for higher clock speed
2009-04-21 18:22:41 +00:00
fros4943
6554e2293d
+ draw connection arrows
2009-04-20 18:09:54 +00:00
nifi
a66724e272
made table contents more compact and changed tooltip for radio packets to show hex dump
2009-04-20 17:24:03 +00:00
nifi
ecf288c89d
allow loading configs referring to MspIPAddress, which was removed
2009-04-20 17:16:20 +00:00
nifi
b08cffa3b2
Utility methods for generating hex dumps et al
2009-04-20 17:14:19 +00:00
fros4943
5a5585238b
allow loading configs referring to MspIPAddress, which was removed
2009-04-20 16:48:53 +00:00
fros4943
eccadb44f1
bugfix: must lock active connections before copying
2009-04-20 16:26:02 +00:00
fros4943
eb3d501ca6
added rime address interface as default for contikii mote types
2009-04-20 16:17:38 +00:00
fros4943
d91100fdfc
remade led skin: showing leds left of motes
2009-04-20 16:16:25 +00:00
fros4943
266823defa
new visualizer skin: showing mote IP or Rime addresses
2009-04-20 16:15:47 +00:00
fros4943
0528bcd1bd
added read-only rime address interface: currently fixed to 2 bytes
2009-04-20 16:13:11 +00:00
fros4943
3718304c76
removed abstract ip address interface: equal for all motes
2009-04-20 16:12:37 +00:00
fros4943
c76a406cba
added read-only rime address interface
2009-04-20 16:12:01 +00:00
fros4943
dfbc51c6f2
disabled ip distributors, currently not used
2009-04-20 16:09:29 +00:00
fros4943
d669cc67fb
removed debugging output
2009-04-20 16:09:10 +00:00
fros4943
8f8ac130fb
fixed error output in log4j
2009-04-20 16:08:53 +00:00
fros4943
a9cf47c97a
show error dialog when failing to add mote
2009-04-20 16:07:32 +00:00
joxe
301d25c21f
added ELF file checker in mspsim - verifies ELF files based on the 4 magic bytes
2009-04-20 16:06:03 +00:00
joxe
61ed2b5b5c
made COOJA accept ELF files based on MAGIC ELF code instead of filename
2009-04-20 16:04:46 +00:00
nifi
7d7f2348d9
increased tooltip timeout to one minute
2009-04-20 14:11:01 +00:00
fros4943
da33cb5e61
added test for shell sendcmd command (sky platform)
2009-04-20 13:12:52 +00:00
fros4943
f4755f649f
added test for shell download command (sky platform)
2009-04-20 13:04:20 +00:00
nvt-se
2d049bf5dc
fixed udp test to use new addresses.
2009-04-16 20:54:49 +00:00
fros4943
ebcd6a08a5
added method for checking if radio can receive data
2009-04-16 14:28:12 +00:00
fros4943
5af34f6800
+ method for checking if radio can receive data. does not change simulation output, but allows the radio medium to better keep track of how many packets were received etc
2009-04-16 14:26:35 +00:00
zhitao
7bc3df218c
removed file to avoid violation of IP rights
2009-04-16 13:37:28 +00:00
zhitao
302e4339a8
added supposedly missing BSL program for JCreate nodes
2009-04-16 12:33:19 +00:00
fros4943
906e341a65
visualizer update: enabling selecting multiple visualizer skins
2009-04-14 15:40:26 +00:00
nvt-se
d86ee2c665
changed address setup slightly.
2009-04-10 16:51:16 +00:00
nifi
7b34c4114c
restored IP addresses
2009-04-09 23:10:43 +00:00
nifi
7b03d80974
added test script and info for ipv6 routing multihop simulation
2009-04-09 22:45:32 +00:00
nvt-se
670311f16c
added ipv6 routing simulation with multiple hops.
2009-04-09 22:07:28 +00:00
fros4943
692dd2cb4b
do not convert packet is bad length is set in cc2420 fifo
2009-04-09 17:41:29 +00:00
fros4943
38b38edf95
added method for faking mote output in tests: mostly used for debugging
2009-04-03 17:05:14 +00:00
fros4943
b2a98f49e6
+ constructor option for not automatically throwing "requires visualization" exception
2009-04-03 17:03:42 +00:00
fros4943
188ce975ca
radio logger plugin facelift: display the original packet data instead of only the converted data.
...
this allows viewing all bytes sent from for example sky motes, including radio/mac headers
2009-04-01 23:40:00 +00:00
fros4943
2ac3662ea8
sky motes output the new converted radio packets
2009-04-01 23:37:27 +00:00
fros4943
0a740aad63
documentation update
2009-04-01 23:35:23 +00:00
fros4943
5eddd2d095
added converted radio packet, containing both the original and the converted data
2009-04-01 23:34:45 +00:00
fros4943
e3bf2b58a6
logging connection start time
2009-04-01 23:33:05 +00:00
fros4943
9b41b02de1
added another ipv6 udp test:
...
identical setup as the sky_ipv6_udp test, but with contiki motes (native ipv6)
2009-04-01 18:09:20 +00:00
fros4943
e4858a2ade
update ip interface to supports ipv6 addresses.
...
also disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki
2009-04-01 17:43:17 +00:00
fros4943
0e732f8dba
removed old uip/uaodv comm stack, added uipv6
2009-04-01 14:02:44 +00:00
fros4943
def81a5d02
remember last source file
2009-04-01 14:01:45 +00:00
fros4943
fe1f594d73
activated communication stack selection for contiki mote types
2009-04-01 14:00:00 +00:00
fros4943
5ed4a247f7
highlight all destination motes when clicked
2009-04-01 13:53:37 +00:00
fros4943
e0eaeb0d8b
bugfix: no visualizer may be selected when simulation is reloaded
2009-04-01 13:51:50 +00:00
fros4943
1536c83f2f
added serial line init
2009-04-01 13:38:14 +00:00
fros4943
13b6fe2cd5
added experimental packet counters
2009-03-26 16:24:31 +00:00
fros4943
5f1fda0406
removed unused variables + writing serial data in timeevent
2009-03-26 16:23:47 +00:00
fros4943
bc26f42992
make sure components are initialized at tick event
2009-03-26 15:41:59 +00:00
fros4943
1cc78b180f
highlight several motes at the same time
2009-03-26 15:41:04 +00:00
fros4943
d7dda45a96
recompile at ctrl+r
2009-03-26 15:40:37 +00:00
fros4943
75673d18f5
minor fix: process argument also working on linux
2009-03-26 14:15:10 +00:00
fros4943
a034df48cf
new test for shell command 'exec' and the Contiki elfloader:
...
Tests Contiki ELF loader and shell command 'exec': Hello-world is compiled as a Contiki executable (.ce) and is uploaded to the single Sky node via serial port (base64 encoded). The node then loads and starts the uploaded hello-world application. Test succeeds when the 'Hello, World' output appears
2009-03-26 12:51:56 +00:00
joxe
d9e1e9d037
updated with latest mspsim version
2009-03-24 16:31:17 +00:00
fros4943
6ab2b74258
bugfix: made classes public
2009-03-24 16:07:44 +00:00
fros4943
c377c9150f
removed visualizer example project
2009-03-24 15:50:54 +00:00
fros4943
5abbb3e9c2
config update: visualizers
2009-03-24 15:49:35 +00:00
fros4943
2f25d6fbe5
backwards compatibility: visualizer plugins were removed
2009-03-24 15:47:10 +00:00
fros4943
ce32a5b0b0
register radio medium skin
2009-03-24 15:46:46 +00:00
fros4943
b949a036f2
a few simple visualizer skins
2009-03-24 15:46:29 +00:00
fros4943
b7840178a1
new visualizer plugin with skin support
2009-03-24 15:46:18 +00:00
fros4943
5c38c82608
removing old visualizer plugins.
...
(replaced by a generic visualizer with skin support)
2009-03-24 15:44:25 +00:00
nifi
7da12552cd
fixed to save scroll position in configuration files
2009-03-23 13:26:43 +00:00
fros4943
f0c562a2c6
minor bugfixes: support relative paths when saving simulation configs + check that simulation load succeeded
2009-03-22 14:05:19 +00:00
fros4943
65d64d0c06
make sure parent directory of current config file exists
2009-03-22 13:47:38 +00:00
fros4943
950f7696a3
autostart simulation is reloaded when simulation is running
2009-03-21 16:45:42 +00:00
fros4943
fee88cb042
make sure compilation process is killed when simulation load is aborted
2009-03-21 16:44:29 +00:00
fros4943
fa09bd6c69
removed non-existing IP stack warning at startup
2009-03-21 15:49:29 +00:00
fros4943
9088341a17
added apps/avrora as default project for all platforms
2009-03-21 15:46:51 +00:00
fros4943
c205280f30
removing contiki log interface, instead only using the serial port interface
2009-03-21 15:41:42 +00:00
fros4943
480c023578
abstraction level annotation
2009-03-21 14:51:03 +00:00
fros4943
eb2753f23d
set default size
2009-03-21 14:40:22 +00:00
fros4943
82669a1a89
simplified error dialog
2009-03-21 14:24:55 +00:00
joxe
29f6ee7e98
added serial output for MicaZ
2009-03-19 18:58:19 +00:00
joxe
9ea19b4e81
added generic serial GUI component
2009-03-19 18:55:44 +00:00
joxe
a464b9455c
removed some debug printout and added initial serial output on stdout
2009-03-19 14:47:36 +00:00
joxe
e3fa0a41d3
fixed firmware loading bug for micaz nodes
2009-03-19 09:08:44 +00:00
fros4943
6f52115d3a
bugfix: sensor process should be started by default
2009-03-17 10:34:02 +00:00
fros4943
0580b4ea9d
+ special case: allow single parent directory when saving relative source file paths
2009-03-17 09:16:36 +00:00
fros4943
c53d80a608
experimental: print pc history when program jumps to bad address
2009-03-13 16:24:29 +00:00
fros4943
eb3874a1fb
set initial error dialog size
2009-03-13 15:15:37 +00:00
fros4943
f4333ab089
use regular api for configuring mote type, instead of directly calling contiki compile method
2009-03-13 14:33:48 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
nifi
f67909271e
code cleanup
2009-03-12 18:40:06 +00:00
nifi
92e941f2c1
bug fix: set simulation at configure
2009-03-12 18:25:45 +00:00
nifi
473a10caf2
fixed to finish edit before reading values from text fields
2009-03-12 17:52:20 +00:00
fros4943
536af1381a
temporary fix for catching new emulationexception
2009-03-12 17:47:57 +00:00
fros4943
a27ec1bbef
updated mspsim with adc bugfix
2009-03-12 17:30:07 +00:00
fros4943
67407d6f36
+ support for config file relative paths when saving simulations
...
+ support for quickstarting from simulation config
2009-03-12 15:10:00 +00:00
fros4943
7099572282
+ support for config file relative paths when saving simulations
2009-03-12 15:08:29 +00:00
fros4943
a17e7d109a
minor fix: only reset dialogstate if mote type is not loaded
2009-03-12 13:20:58 +00:00
fros4943
063bf88f90
cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work
...
+
cygwin path fix for quickstart
2009-03-12 13:04:10 +00:00
nifi
9a388fbd99
cleaned up exception handling
2009-03-12 11:01:26 +00:00
fros4943
be9bc1570d
immediately quit if simulation has error in test mode
2009-03-11 22:17:04 +00:00
fros4943
14924bae66
experimental: quick-n-dirty way to indicate compilation progress when (re)loading simulations
2009-03-11 20:14:52 +00:00
fros4943
9b2a1097d1
using Java's built-in methods for converting to Contiki relative paths
2009-03-11 19:19:39 +00:00
fros4943
47da035f38
added simulation config backwards compatibility for contiki mote types: may not work for configurations with several compiled sources
2009-03-11 18:42:53 +00:00
fros4943
3a2718279b
gui fixes: allow editing external tools settings, hide advanced tab (not used yet) etc
2009-03-11 18:18:57 +00:00
fros4943
d26ba2606b
added simulation config backwards compatibility for msp motes
2009-03-11 17:46:59 +00:00
fros4943
1ca67916a4
implemented new mote type interfaces
2009-03-11 14:12:18 +00:00
fros4943
adf1489cda
also clean avrora project
2009-03-11 13:54:46 +00:00
fros4943
42ed8a3b9b
only remove cooja-avrora jar when cleaning
2009-03-11 13:49:47 +00:00
fros4943
aa74e55347
minor fix: clear commands from event thread
2009-03-11 13:27:51 +00:00
fros4943
82305b3572
with the recent mote type updates, the simulation config structure changed.
...
* updated simconfigs
2009-03-11 13:25:40 +00:00
fros4943
71ea1cc56e
saving contiki relative paths
2009-03-11 11:54:19 +00:00
fros4943
9b30447b11
removed old contiki mote type dialog, replaced by the newer shared compile dialog
2009-03-11 08:46:10 +00:00
fros4943
f46770ae85
using new compiler library for configuration wizard
2009-03-11 08:44:32 +00:00
fros4943
8ec6bbd32b
compile method signature update
2009-03-11 08:42:07 +00:00
fros4943
bcb34297df
reimplemented quickstart functionality
2009-03-11 07:45:54 +00:00
fros4943
874ffb029b
removed autostart processes from contiki template: these are now instead defined in the contiki application
2009-03-10 21:24:46 +00:00
fros4943
42a7eb3c86
new compile dialog for creating contiki mote types.
2009-03-10 21:21:44 +00:00
fros4943
fc57a7acc8
mote types are returned as array now
2009-03-10 21:20:30 +00:00
fros4943
230d580aae
added functionality for generating contiki main sources and building compiler environment. used by the contiki mote type
2009-03-10 21:20:08 +00:00
fros4943
e1baf890e4
added configurable environment + other minor changes
2009-03-10 21:13:07 +00:00
fros4943
c0bdeed635
rewrote contiki mote type to be more integrated with the contiki build system.
...
example: instead of selecting and scanning for contiki processes, autostart processes are determined as on other platforms: via AUTOSTART() macro in the main contiki application
not all functionality has been reimplemented yet
2009-03-10 21:10:06 +00:00
fros4943
d0b7460b5e
return mote types as array, not vector
2009-03-10 21:05:29 +00:00
fros4943
c7ea9fc6e1
minor documentation and code fixes
2009-03-10 21:05:00 +00:00
fros4943
eb9865ce79
removing old JNI test, replaced by a configuration wizard in Cooja
2009-03-09 17:46:48 +00:00
fros4943
25ca251a89
quick-fix: the generator assumes that the constructor accepts a mote object, this is the quickest fix currently
2009-03-09 17:14:35 +00:00
fros4943
e5a5f7dd5d
using mote type configuration for generating correct mote interfaces:
...
it is now possible to configure which interfaces msp430-based have
2009-03-09 17:12:27 +00:00
fros4943
1c0e432969
esb mote type should use esb mote interfaces, not sky mote interfaces
2009-03-09 17:10:14 +00:00
fros4943
01b0006e6f
method names changed
2009-03-09 16:08:17 +00:00
fros4943
728b22bedb
renamed author to avoid compiler warnings
2009-03-09 16:05:11 +00:00
fros4943
f30f8d289e
compile dialog implementations
2009-03-09 16:04:42 +00:00
fros4943
83ad0c18ba
calling contiki compile library for compiling instead of as earlier the msp mote type
2009-03-09 16:03:58 +00:00
fros4943
bd3107ae0d
method names changed
2009-03-09 16:01:29 +00:00
fros4943
ad63ae22fd
now using contiki compilation library:
...
removed lots of code from this class that was earlier used for compiling sky and esb motes
2009-03-09 16:00:16 +00:00
fros4943
b1d886a8e1
added contiki-related methods to mote type java interface, for example main contiki source file
2009-03-09 15:40:26 +00:00
fros4943
f3ca86b261
new mote interfaces api + name changes
2009-03-09 15:39:33 +00:00
fros4943
74647ce2de
application-level mote type implementing new mote type methods
...
+ radio disturber mote extending abstract application mote
2009-03-09 15:38:10 +00:00
fros4943
dadc67abd7
renamed author to avoid compiler warnings
2009-03-09 14:08:54 +00:00
fros4943
10d13f9dd3
mote interface handler initialized by class array, not vector pointer
2009-03-09 14:08:03 +00:00
fros4943
217d8cf0b3
abstract contiki compile dialog using compile library.
...
to be implemented by msp mote type
2009-03-09 13:58:12 +00:00
fros4943
37586984f6
contiki compile library. used by several mote type implementations (both emulated and os-level).
2009-03-09 13:32:50 +00:00
fros4943
68d110216f
added commonly used popup menu items to message list, such as copy to clipboard
2009-03-09 13:19:07 +00:00
fros4943
659c7e7311
added webserver-nogui source and WITH_NULLMAC to example code (too large otherwise)
2009-03-03 17:25:33 +00:00
fros4943
04ab2abe62
explicit make clean no longer needed since temporary files are now removed by default
2009-03-03 16:31:13 +00:00
fros4943
710c96afc5
immediately aborting script execution when test reports success or failure
2009-03-03 15:55:39 +00:00
fros4943
ac5b2b1500
make sure test script is activated *after* script file has been loaded
2009-03-03 15:24:18 +00:00
fros4943
7a54a0b8eb
better debugging output when compiling and cleaning for msp motes
2009-03-03 15:01:14 +00:00
fros4943
ba12b6ec00
minor fix: keep library files when cleaning temporary files
2009-03-03 14:57:42 +00:00
fros4943
7b763f0e75
automatically cleaning temporary files for every non-gui test: takes longer but allows for test-specific compiler flags
2009-03-03 13:52:35 +00:00
fros4943
e91cc0f1ef
automatically activate test for new simulations + simplified exporting tests
2009-03-03 13:50:02 +00:00
fros4943
6367a73fa4
automatically cleaning temporary files for every non-gui test: takes longer but allows for test-specific compiler flags
2009-03-03 13:45:32 +00:00
fros4943
4fdb0c2f03
added clean temporary files method
2009-03-03 13:43:48 +00:00
fros4943
547eadceb3
minor author name fix: strange names causes compiler warnings on some systems
2009-03-03 13:42:45 +00:00
fros4943
70c0c0cd7e
exclude duplicate received nodes in runicast test
2009-03-03 12:21:06 +00:00
fros4943
35e3efa0a6
minor bugfix: check that simulation exists before reloading
2009-03-03 12:09:34 +00:00
fros4943
b98c18e616
changed default simulation delay to 0
2009-03-02 09:46:19 +00:00
nvt-se
71e1e2a78f
include deluge directory in the test.
2009-02-27 19:31:57 +00:00
fros4943
e485c209b1
bugfix: clear all mote relations when simulation is removed
2009-02-27 14:48:15 +00:00
nifi
03cfa78310
removed some stuff from the avrora jar (replaced with smaller version)
2009-02-26 15:32:11 +00:00
fros4943
3d7e732286
removed sky_deluge test output: file is generated when test is performed
2009-02-26 13:51:37 +00:00
fros4943
6b9f103c65
added mote relation interface to default contiki mote config
2009-02-26 13:49:58 +00:00
fros4943
b059155e51
added mote relation interface to emulated sky nodes
2009-02-26 13:48:08 +00:00
fros4943
3fb20c5077
moved test framework chakana to backyard: project hasn't been used or maintained in some time
2009-02-26 13:47:38 +00:00
fros4943
a8838d7b17
make sure node interfaces are initialized when generating toString()
2009-02-26 13:45:58 +00:00
fros4943
c2279d6c81
print debugging info when mote interface fails to load
2009-02-26 13:36:15 +00:00
fros4943
e73c48a826
added mote relation support. used to show relations between simulated motes, typically for debugging and visualization purposes
2009-02-26 13:35:45 +00:00
fros4943
46bd43579b
added mote relation interface. used to show relations between simulated motes, typically for debugging and visualization purposes
2009-02-26 13:31:25 +00:00
fros4943
16bec06558
basic visualizer with support for painting mote relations
2009-02-26 13:29:30 +00:00
nvt-se
31bc37a043
Added Deluge and tests for it.
2009-02-25 17:00:00 +00:00
fros4943
5b258ce104
minor bugfix: not all mote type identifiers were reserved when reloading simulation. this caused loading some simulations with several mote types to fail
...
+ added key accelerator for reloading a simulation (ctrl+r or ctrl+shift+r). thanks to David Gustafsson for patching :)
+ added yet another key accelerator for starting/stopping simulation (ctrl+s)
2009-02-25 16:11:59 +00:00
nifi
6f8ec800c5
removed some stuff from the avrora jar
2009-02-25 15:20:22 +00:00
fros4943
e8c2f67d07
new version with minor fix: deterministic sky mac addresses not ending with zeroes (used to generate ipv6 address by the sky platform)
2009-02-25 14:57:42 +00:00
fros4943
58a2af680a
renamed strange last name to start with O instead of
2009-02-25 14:46:22 +00:00
fros4943
f6b8fdc2a8
added very simple sky ipv6 test: exercises the examples/udp-sender-ipv6 and examples/udp-receiver-ipv6 code
2009-02-25 12:14:19 +00:00
fros4943
9c024f19e0
updated reference to moved plugin class VisUDGM. enables importing tests graphically again.
2009-02-24 16:01:32 +00:00
fros4943
e7d1d7eba7
deleting reference to moved plugin class VisUDGM
2009-02-24 15:56:58 +00:00
fros4943
ab01f2b901
added new radio medium: directed graph radio medium (short: dgrm).
...
this radio medium will likely later be used to implement other more complex radio mediums such as udgm and mrm.
currently the user interface (dgrm config plugin) for defining radio links is very limited.
experimental: the new radio medium supports propagation delays, configurable via the plugin.
2009-02-24 15:29:52 +00:00
fros4943
e87d94439e
added experimental per destination propagation delay in radio connections. uses cooja time events to delay radio events.
...
currently only delaying the four main events: reception started, packet delivery, byte delivery, and reception ended
note that propagation delay is not yet implemented for all radio events - interfered radios will for example still be interfered immediately
2009-02-24 15:12:22 +00:00
fros4943
28ace6d912
added toString method
2009-02-24 15:09:07 +00:00
fros4943
0bb6e99326
added method returning all motes, instead of using getMote(int) method
2009-02-24 15:08:20 +00:00
fros4943
06ed4d3f0a
added experimental per destination delay
2009-02-24 15:07:01 +00:00
fros4943
c2f7780b68
radio signalling moved to abstract radio medium
2009-02-24 15:05:36 +00:00
joxe
bb1bd3a706
added radio communication between micaz nodes
2009-02-24 07:49:42 +00:00
joxe
1da3c2544c
moved Avrora motes into the mspsim array and renamed
2009-02-23 08:33:23 +00:00
joxe
f8ea34a689
added avrora to buildpath
2009-02-22 16:50:42 +00:00
joxe
8be8d92923
added avrora-micaz node emulation
2009-02-22 16:45:01 +00:00
fros4943
0905ef7134
separated udgm visualizer class from the udgm
2009-02-21 09:49:40 +00:00
fros4943
7c86f70573
test template used by configuration wizard
2009-02-20 16:59:52 +00:00
fros4943
d95c26b49e
deleting build output before recompiling
2009-02-20 16:51:00 +00:00
fros4943
660167b39b
added configuration wizard to replace the jni_tests
2009-02-20 16:50:16 +00:00
fros4943
7a216dc837
made two static methods public
2009-02-20 16:49:43 +00:00
fros4943
264529708e
sorting plugin menu according to plugin type
2009-02-18 17:25:14 +00:00
fros4943
11734b3c3b
minor fixes + added script line numbers
2009-02-18 16:43:42 +00:00
fros4943
91a68128d3
added error info at incorrect contiki path
2009-02-18 16:11:14 +00:00
fros4943
0e9add68ce
remove new motes without stopping simulation: from timevent invoked by simulation loop
...
enables test scripts to remove new motes
2009-02-18 16:01:31 +00:00
fros4943
d458fe79b5
add new motes without stopping simulation: from timevent invoked by simulation loop
...
enables test scripts to add new motes
2009-02-18 15:57:47 +00:00
fros4943
472ecf2120
added progress bar while scanning contiki (may take several seconds)
2009-02-18 15:02:32 +00:00
fros4943
e3264d2e00
added manual positioner to default config
2009-02-18 13:59:08 +00:00
fros4943
a9701e0b62
added manual positioner: allows user to manually enter every mote position
2009-02-18 13:55:51 +00:00
fros4943
dc48615e51
do not dispose add mote dialog if positioner fails, simply abort
2009-02-18 13:55:24 +00:00
fros4943
8ddaf79361
added debugging output when positioner fails
2009-02-18 13:55:01 +00:00
fros4943
9e9b712e5d
removed example mote type implementation from default configuration
2009-02-18 12:12:53 +00:00
fros4943
00273dce75
minor changes and documentation regarding using random generators in Cooja
2009-02-18 12:07:19 +00:00
fros4943
cc56325300
main random generator must not be used for setup tasks such as node positioning
2009-02-18 11:49:54 +00:00
fros4943
fbb09061c8
example mote implementation uses main random generator
2009-02-18 10:41:50 +00:00
fros4943
00c88ca2d3
removed creating unnecessary random generator
2009-02-18 10:40:25 +00:00
fros4943
e907e4dace
quickstart uses main random generator
2009-02-18 10:35:31 +00:00
fros4943
d530b44e5a
using main random generator
2009-02-18 10:11:32 +00:00
fros4943
3c83d14059
clearing test log when reactivated
2009-02-18 10:11:11 +00:00
fros4943
8e9686e01d
added option to make random seed automatically generated at simulation load
...
+ a single random generator instance is used instead of sharing seed between different parts of the simulator
2009-02-18 10:09:32 +00:00
fros4943
ffcf7fc43b
added some commonly used mote actions in right-click menu: show leds and serial port.
...
+ dragndrop stub methods
2009-02-17 14:09:51 +00:00
fros4943
411d92a297
minor fix: only reporting test ok if test did not already fail
2009-02-17 12:58:13 +00:00
fros4943
663a0b2c9b
increased test timeout and also comparing number of received notifications vs sent notifications
2009-02-17 12:53:59 +00:00
fros4943
0ae2ac378e
explicit "bash -c" no longer needed
2009-02-17 11:54:18 +00:00
fros4943
43d21e6e31
forcing all commands to be parsed/executed by bash to simplify multiple make commands
2009-02-17 11:47:12 +00:00
fros4943
4bf96fba26
updated test to transfer files over a multihop link, to use NULLMAC, and to clean before and after building the sources
...
NULLMAC is used mainly to reserve ROM
2009-02-16 12:40:28 +00:00
fros4943
71836a0f8e
split command into arguments is unnecessary
2009-02-16 12:37:18 +00:00
adamdunkels
bed1b4cc4f
Changed to use sky-checkpoint.c instead of sky-shell.c since checkpointing was disabled in sky-shell.c
2009-02-15 08:45:30 +00:00
adamdunkels
9b23d1553e
Removed left-over log output
2009-02-08 21:06:23 +00:00
adamdunkels
0d1e7e9b32
Improved parsing of serial data and output
2009-02-08 19:38:22 +00:00
adamdunkels
54b4226f70
Nightly test that runs Contiki's shell collect command in much the same way as the Contiki collect program does
2009-02-08 19:34:34 +00:00
fros4943
2d671a1265
Nimbus look and feel is not fully supported on many linux platforms:
...
* changing default look and feel to cross platform l&f on linux systems
2009-02-08 18:33:05 +00:00
fros4943
3fcd77f522
increased default java memory allocation for contiki tests
2009-02-07 17:24:15 +00:00
joxe
250ed0b910
updated mspsim with support for setting node id
2009-02-07 16:39:43 +00:00
joxe
4b78e80bda
added MAC address setting - setNodeID in SkyNode
2009-02-07 16:38:51 +00:00
adamdunkels
29ec3b02f5
A nightly test of the Rime collect protocol on the sky platform
2009-02-07 16:18:25 +00:00
adamdunkels
cf57c8189f
Added a nightly test for the Rime collect protocol
2009-02-06 10:13:55 +00:00
fros4943
3c11bf4d8c
start each log file with its filename
2009-02-04 17:58:17 +00:00
