deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
9327 commits 6 branches 13 tags 80 MiB
Commit graph

2056 commits

Author SHA1 Message Date
Adam Dunkels 465c401cdc Reduce size of the neighbor table entries to make RPL fit into the Tmote Sky RAM. 2012-01-18 06:15:38 -08:00
Adam Dunkels 6185da7b80 Default to SMALL unless otherwise specified, to get size of binaries smaller so that Contiki with RPL/IPv6 fits on the Tmote Sky again. 2012-01-18 06:13:17 -08:00
Niclas Finne 42a7125ce7 fixed compiler warning 2012-01-17 21:47:48 +01:00
Niclas Finne 9ea5149433 The definitions for PxSEL2 are missing in some versions of mspgcc 2012-01-16 13:00:16 +01:00
Niclas Finne 1c6c4ba2f1 Added resource definition for button and removed obsolete compiler setup (compiler setup is now handled by cpu/msp430/msp430def.h) 2012-01-11 01:54:52 +01:00
David Kopf 58298f59db Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal 
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
 2012-01-10 12:42:27 -05:00
Niclas Finne f3db12c19d MSP430 setup for f2xxx based on Z1 2012-01-09 14:56:03 +01:00
Niclas Finne 9ffcd53868 Fixed compiler warning (with IAR compiler) 2012-01-09 14:56:00 +01:00
Niclas Finne 3daa822f89 Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc) 2012-01-09 14:55:57 +01:00
Niclas Finne 8aaa9d14b7 minor code cleanup 2012-01-09 14:55:51 +01:00
Niclas Finne 987b57b015 moved macros to implementation file, end-of-line normalization, code style 2012-01-09 14:55:43 +01:00
Niclas Finne 013571ed3f * Removed __MSP430X__ (already defined by newer mspgcc4) 
* Commented out pragma not supported by mspgcc
 2012-01-09 14:55:40 +01:00
Niclas Finne 866bc91e5a enabled nullrdc autoack support 2012-01-09 14:55:37 +01:00
Niclas Finne cdfa8708e3 * Added f2xxx for two series (for example z1) 
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
 2012-01-09 14:54:57 +01:00
Niclas Finne f4f84ffca4 Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X 2012-01-09 14:54:01 +01:00
Niclas Finne d1b22d40fa leds setup for WiSMote 2012-01-09 14:41:45 +01:00
Niclas Finne 8aa1011c03 Removed explicit specification of data model small for IAR compiler. Data model small is default and this will allow projects to override the data model 2012-01-09 14:41:39 +01:00
Niclas Finne 708f9d77d2 Corrected timing for higher CPU speed 2012-01-09 14:41:36 +01:00
Niclas Finne 6c5379606b Set node_id, disabled watchdog for now 2012-01-09 14:39:32 +01:00
Niclas Finne 05b10eb9ce Initial WiSMote port based on code from Arago Systems. 2012-01-09 12:25:06 +01:00
Niclas Finne 367c82a5ab added compiler flags and macros for IAR and mspgcc 4.4.5 compilers 2012-01-09 12:24:33 +01:00
David Kopf b251619a2f Add wpcap for cygwin/Windows native border router 2012-01-08 13:37:56 -05:00
Joakim Eriksson 5da8a9261b fixed so that it works for non IPv6 applications 2012-01-06 03:59:43 -08:00
Joakim Eriksson c3af79b795 Made native main loop sleep a bit more 2012-01-01 09:29:33 +01:00
Niclas Finne 8b83ffec67 Added native-border-router and slip-radio 2012-01-01 09:29:33 +01:00
Joakim Eriksson 0ea95c21b3 Added api for reading out tmp100 x100 temps 2012-01-01 09:29:10 +01:00
Niclas Finne d14d90ea68 Moved variable definitions from header file 2011-12-20 05:09:31 +01:00
Niclas Finne c0cf69ecbd fixed compiler warnings 2011-12-20 05:09:28 +01:00
Niclas Finne 3661ff242e io, signal and IAR-GCC checks have been moved into contiki include file 2011-12-20 05:09:16 +01:00
Nicolas Tsiftes d0ebeb409e Merge remote-tracking branch 'sf/master' into rpl-patch 
Conflicts:
	core/net/tcpip.c
 2011-12-08 15:26:11 +01:00
Matthias Kovatsch 36763cabbd Introduced PLATFORM_HAS_LIGHT, _BATTERY, and _SHT11. 2011-12-07 20:47:31 +01:00
Adam Dunkels 66c280039b Removed obsolete platforms 2011-12-05 21:49:38 +01:00
Nicolas Tsiftes 0e32956a63 Merge remote-tracking branch 'sf/master' into rpl-patch 2011-11-21 14:59:31 +01:00
David Kopf fb977cb9ef Better fix for hardware FCS error on JTAG reset 
Correct silly error introduced by trying to save two bytes.
 2011-11-15 13:24:58 -05:00
David Kopf 3612fdff5b Add params.c to Raven and sync with 128rfa1 contiki-conf.h 
Contikimac works with mcu sleep on both platforms.
 2011-11-14 11:56:34 -05:00
David Kopf 65032c4d35 Get better random seed on startup 2011-11-14 11:51:54 -05:00
David Kopf bdd164e003 Reverse node_id bytes, patch from Geog von Zengen 2011-11-08 12:23:29 -05:00
Mariano Alvira af4ef9531c Add node_id to econotag 2011-10-25 10:09:28 -04:00
Niclas Finne ed1780f9af Removed quickstart rule for target 'clean' to avoid make warnings 2011-10-24 17:04:45 +02:00
nvt d711887a1b Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-10-10 22:11:52 +02:00
nvt 4f3528f7ed Move compower configuration out of the non-IPv6 conditional clause. 2011-10-10 22:11:29 +02:00
Matthias Kovatsch efeebe953c Enabled UDP checksums for minimal-net 2011-10-10 14:25:03 +02:00
simonduq dd8576830e Added bursts support in CSMA/ContikiMAC, and CFS-swapping in 
queuebuf. Exemplified in examples/udp-stream.
 2011-09-27 16:47:03 +02:00
Joakim Eriksson 5b1d9617c4 moved io and signal and IAR-GCC checks from driver files into contiki include file 2011-09-26 10:38:41 +02:00
Joakim Eriksson 95dde73618 fixed Sky platform for IAR compiler 2011-09-11 17:18:02 +02:00
David Kopf f721f646fa Adjust sleep time by ticks instead of seconds, proposed by Ivan Delamer 2011-09-10 12:44:49 -04:00
Mariano Alvira 3e5afa2b59 replace MAC_CONF_CHANNEL_CHECK_RATE with 
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE for redbee-dev and econotag

Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)
 2011-09-06 07:49:23 -04:00
Adam Dunkels eeb25b9667 If no MAC is defined, create one from the node ID 2011-09-05 22:04:06 +02:00
Adam Dunkels 8fee2a507c Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE) 2011-09-05 20:43:10 +02:00
Adam Dunkels 0f8145c78b Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE) 2011-09-05 20:43:01 +02:00
Adam Dunkels 25c28e06cc Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE) 2011-09-05 20:42:12 +02:00
Adam Dunkels a06cf93e4c Made the sky and z1 platform handling of PROJECT_CONF_H the same as the other platforms: the makefile should define PROJECT_CONF_H to be the name of the header file to include. This header file should #undef everything it #defines, as it is included after all the other configuration options in contiki-conf.h 2011-09-05 11:46:15 +02:00
Adam Dunkels ee75ec3ced Be a little more conservative in terms of what headers not to compress 2011-09-05 11:41:41 +02:00
Mariano Alvira 6c0bbc492b change mc1322x rtimers to 32-bit 
hardcode a close default value for the RTC
 2011-09-02 12:32:47 -04:00
Adam Dunkels 6c607b702a Use the SICSLOWPAN_CONF_COMPRESSION_THRESHOLD to avoid compressing IPv6 packets smaller than 60 bytes. This allows us to use ContikiMAC without its header, making it 802.15.4 compliant again. 2011-09-02 13:52:19 +02:00
Adam Dunkels add8367947 Include stdlib.h for the NULL macro 2011-08-31 21:56:28 +02:00
David Kopf 3520cc0bae flash led on tcp get, fix pingbacks on rpl build, patch web data for params 2011-08-31 12:13:31 -04:00
David Kopf 36b290a1cd Refactor with params.c, h 2011-08-31 11:47:17 -04:00
David Kopf d2aece89ef Add settings manager with program flash defaults, random routine, periodic prints with ENERGEST, node-id. 2011-08-28 16:22:39 -04:00
David Kopf bdec65b889 Fix typos and file endings 2011-08-28 16:04:36 -04:00
David Kopf 9fec648b3e Allow selection of slip port 2011-08-25 14:43:18 -04:00
David Kopf dff77aea61 Correct typo 2011-08-25 14:37:12 -04:00
David Kopf 94fc40f736 Move LEDONPORTE1 define to contiki-conf.h, fixing typo. 2011-08-24 11:35:58 -04:00
David Kopf 3c18372939 Add periodic prints and stack monitor 2011-08-24 10:55:58 -04:00
David Kopf b55dddcd38 Free rtimer for contikimac, add print-stats option 2011-08-15 14:55:18 -04:00
David Kopf 83e3b99d54 Let RPL examples enable platform RPL 2011-08-15 14:45:44 -04:00
David Kopf 50d1086553 Add changes needed for contikimac 2011-08-13 11:38:38 -04:00
David Kopf ea1345d3fe Update to proper webserver define 2011-08-13 11:36:43 -04:00
David Kopf f36c97a9a4 Get random seed from noisy ADC conversion at startup. 2011-08-13 11:31:20 -04:00
Adam Dunkels 40bf585af8 The Z1 platform has LEDs 2011-08-08 22:46:30 +02:00
David Kopf c9b19ce655 Change timer setups for arbitrary CLOCK_CONF_SECOND 
Change raven to 128 ticks and enable 32KHz crystal as default.
 2011-08-05 15:14:35 -04:00
David Kopf 96c3c1093a Assign aaaa:: prefix if HARD_CODED_ADDRESS not defined 2011-08-03 12:30:20 -04:00
David Kopf 6ae3e2bcb2 Restore micaz/dev/clock.c, mysteriously renamed to iris/dev/sensors/battery-sensor.c 2011-08-03 11:44:22 -04:00
David Kopf e2ad2acde4 Add stk500 platform and changes suggested by Daniel Willmann 2011-08-03 11:18:55 -04:00
David Kopf 44f4ee9315 Use PROCESS_NAME_STRING macro to handle NO_PROCESS_NAMES 2011-08-03 11:08:40 -04:00
David Kopf 6ec85fe079 Add Iris port of Shinta Hatatani 2011-08-03 10:17:59 -04:00
Adam Dunkels 8962136b1a Added a motelist target that is the same on both sky and z1 2011-07-29 13:06:00 +02:00
Adam Dunkels aedf4fe8b5 Made ContikiMAC/8 default on z1 platform; enabled power profiling by default 2011-07-29 13:05:36 +02:00
David Kopf 0774fef827 Add explicit RADIOSTATS to platform contiki-conf.h 2011-07-25 15:12:12 -04:00
David Kopf 05c11d362b Clock seconds since startup on minimal-net 2011-07-24 11:53:36 -04:00
David Kopf 0bb585fd60 Replace WEBSERVER by AVR_WEBSERVER 2011-07-24 11:43:17 -04:00
HATATANI Shinta 11d6bc78c5 some fix 2011-07-19 16:21:41 +09:00
Mariano Alvira 697af5ef08 adding tmp102 sensor for the econotag from Hedde Bosman. 
This can be pulling in as a common driver if we can make a generic i2c
Contiki driver.
 2011-07-18 07:30:49 -04:00
HATATANI Shinta 3c168cc395 merge iris and micaz 2011-07-17 10:36:35 +09:00
HATATANI Shinta 94a6f4087c some trivial change 2011-07-15 16:36:25 +09:00
HATATANI Shinta a7d713d253 Now iris port works with tunslip6 (Thanks to Suhas K) 2011-07-15 16:36:25 +09:00
HATATANI Shinta f4740a062a IRIS port is working with uIPv6 2011-07-15 16:36:25 +09:00
HATATANI Shinta 9a201f6934 create iris directory 2011-07-15 16:36:24 +09:00
David Kopf 6355545ded Add template for AUTOSTART_PROCESS 2011-07-11 11:34:04 -04:00
Vincent Brillault dc9cbe647d Changes in RPL implementation : 
- Structural modification of RPL data storage.
- Support multiple gateways (multiple DODAG-ID with a unique InstanceID)
- Use Lollipop counters
- Add leaf-only configuration option for RPL
Bugfix :
- Correctly send "Grounded" flag in DIO
 2011-07-11 16:52:45 +02:00
Mariano Alvira e80f9eb4b5 mc1322x: build fixes for uart2 2011-07-08 19:40:42 -04:00
Niclas Finne 4b26f92e04 Added platform configuration files with resource definitions for the JCreate and Sentilla USB platforms 2011-07-01 17:18:57 +02:00
Niclas Finne 1d07330ac0 Made the platform config file configurable. 2011-07-01 17:16:12 +02:00
Niclas Finne d635c03b52 Fixed bug when reading temperature (abstemp was not always set). 2011-06-30 18:16:35 +02:00
David Kopf 6ea7250af7 Change ctimer startup order, add multihop to wpcap and minimal-net platform. 2011-06-30 12:12:07 -04:00
David Kopf 46de21e771 Allow ipv6 builds on win32 platform. (webserver6 builds with cygwin, needs changes for VC++ compiler) 2011-06-28 08:24:23 -04:00
David Kopf c48b7ab78d Add RPL nodes and border router to minimal-net platform (cygwin only) 2011-06-28 08:19:48 -04:00
dak664 d6db9e4e86 Add project-conf.h to platform contiki-conf.h files. 
Fix jackdaw comments.
 2011-06-08 09:12:57 -04:00
Niclas Finne dc426d789b msp430.h has been merged with msp430def.h for code to compile with IAR compiler 2011-06-07 18:54:57 +02:00
Joakim Eriksson af601dfb23 improved support for IAR compiler for z1 2011-06-05 00:21:47 +02:00
Mariano Alvira cb29a9c667 add leds and button capabilities to the econotag. 2011-05-27 11:01:54 -04:00
Joakim Eriksson 77ec0bfa0f fixed the z1 platform and generic code used by z1 to work with IAR compiler 2011-05-25 17:21:51 +02:00
Niclas Finne 374722b2e0 Added resource definition for leds and button 2011-05-20 14:27:53 +02:00
dak664 55c1ce6e93 Fix ip4 hello-world build 2011-05-18 11:09:16 -04:00
Niclas Finne 41dd2d09f4 Added missing include 2011-05-10 15:28:30 +02:00
Mariano Alvira e2d9082fc7 factor maca hw autoack and nullrdc hw autoack config 2011-05-08 09:50:57 -04:00
Mariano Alvira 65671c66c6 turn on insert ack packet by default 2011-05-08 09:50:57 -04:00
Salvatore Pitrulli 6e20a4c0ce Added missing include. 2011-04-27 18:12:23 +02:00
Salvatore Pitrulli 5eabf33211 Added functions for deep sleep to mbxxx platform. 2011-04-27 18:12:23 +02:00
Salvatore Pitrulli 01a7a78a94 Fixed temperature ADC conversion bug on mbxxx. 
The conversion was made from an incorrect source when
the GPIO pin was not PB7.
Added functions and macros used to select the correct
ADC channel.
 2011-04-20 18:06:20 +02:00
Salvatore Pitrulli aa968309af Merge remote branch 'sf/master' 2011-04-16 16:27:10 +02:00
Salvatore Pitrulli 738c5dcd4b Files for platform mbxxx. 
MBXXX is a fake platform that actually include
all the platforms based on STM32W108 microcontroller.
Detection of the board is made at runtime, at the
expense of code size.
 2011-04-14 08:11:54 +02:00
Salvatore Pitrulli 80605d4045 Change from DEV to PORT in login command for mb851. 
DEV variable was already used in Makefile.include.
 2011-04-14 08:07:15 +02:00
Salvatore Pitrulli af8e58e063 Set LED pins to output when MB851 is in sleep mode. 
This reduces power consumption.
 2011-04-13 18:14:12 +02:00
Oliver Schmidt b19fb0ac9e Activate Telnet-server GUI-support only for project builds. 2011-04-10 17:08:50 +02:00
Oliver Schmidt c6c0d6247b Merge remote-tracking branch 'origin/master' 2011-04-10 13:23:13 +02:00
Oliver Schmidt 7c3adef1c8 Added dependency handling and README.VC 2011-04-10 13:21:39 +02:00
Oliver Schmidt f2678ff7b4 Renamed README to README.1X 2011-04-10 12:43:24 +02:00
Oliver Schmidt 199d51275d Removed section about (recently deleted) VC solution file. 2011-04-10 12:38:11 +02:00
dak664 2e14df3981 Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6. 2011-04-08 15:15:16 -04:00
Salvatore Pitrulli 6655c876f2 Added functions and example for deep sleep on mb851. 
The added function let a process to make the system go
into deep sleep for maximum power saving.
The udp-ipv6-example shows how to use these new functions.
 2011-04-08 11:53:48 +00:00
Niclas Finne 236c459ecf Added missing include 2011-04-07 09:26:12 +02:00
Oliver Schmidt eadd74ae5f Removed VC++ project files. 
Being able to build about any Contiki project in the WIN32 target using VC++ is _so_ much more useful than those project files not integrated in any way into the Contiki build system.
 2011-04-03 22:37:03 +02:00
Oliver Schmidt 5da4faf71e Allow VC++ to be used as alternative to GCC for building in the WIN32 target. 
TODOs:
- Update README
- Add dependency handling
- Add rtimersupport
 2011-04-03 22:32:11 +02:00
Oliver Schmidt f83fb3704b Replaced make-empty-symbols with empty-symbols.[c|h] 
The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.
 2011-04-03 13:24:58 +02:00
Oliver Schmidt 4a731dfda9 Allow for non-GUI win32 apps. 2011-04-03 10:56:18 +02:00
dak664 4e8b4e408c Temporary fix for RNDIS enumeration before the mac address is set up. 
(Turn on RS232 debug to bypass the enumeration wait and let the mac address get set first)
 2011-03-27 14:21:47 -04:00
Enric M. Calvo 4ba4d55e34 cleaned up main 2011-03-26 10:15:49 +01:00
Enric M. Calvo aba380b960 removed modif. to sky files 2011-03-25 17:57:17 +01:00
Enric M. Calvo 1716d837fc Merge branch 'master' of git://contiki.git.sourceforge.net/gitroot/contiki/contiki into master_cleanup 
Makefile.z1 is broken into .common and .z1 to share it with Z1 Starter Platform

Conflicts:
	.gitignore
	platform/z1/Makefile.z1
 2011-03-25 17:46:38 +01:00
dak664 fcb41fa5c2 Refactor with settings manager and better usb enumeration for debug prints 2011-03-23 18:10:49 -04:00
dak664 a9cbbb4570 Add sneezer mode and tx power change 2011-03-23 18:08:07 -04:00
Mariano Alvira 0af24040f1 econotag: add an option to use the watchdog timer 2011-03-22 16:35:54 -04:00
Salvatore Pitrulli 45db1a6faf Reduced uip buffer size in order to compile all the examples. 2011-03-22 19:35:50 +01:00
Salvatore Pitrulli eb588f1aec New HAL and SimpleMAC for STM32W108. 2011-03-22 19:35:49 +01:00
Niclas Finne ccc1687319 Made energest configuration configurable 2011-03-21 21:28:43 +01:00
dak664 5dd7500d0b Add configurable auto cca threshold and implement driver cca call. 
Show smallest rssi in jackdaw menu.
 2011-03-21 11:10:30 -04:00
joakime 7984ec38ce fixed so that accelerometer is initialized and the isr vector is included 2011-03-16 13:56:29 +01:00
Mariano Alvira 59768e7bc7 econotag: fix problem with how IAB based mac addresses are formed 2011-03-13 17:48:47 -04:00
dak664 16a73eafd9 Use uip-debug.h defines and print routines 
Add print to show cause of startup
 2011-03-13 14:07:17 -04:00
dak664 533a827adb Defines need to be above their use in a conditional test 2011-03-11 16:28:02 -05:00
dak664 abf6f1a153 Include objects needed for slip rpl border router build 2011-03-11 15:08:55 -05:00
dak664 e4fcd7ebd7 Add files needed for slip rpl-border-router build. 2011-03-11 14:16:27 -05:00
dak664 02091b083a MAC address to EEMEM, not PROGMEM 
Sync atmega128rfa1 main routine to the raven (timed route prints, etc.)
 2011-03-11 13:47:47 -05:00
dak664 69da4c8cfa Fix unresolved references when built without webserver and/or tcp. Changes suggested by Harald Pichler. 2011-03-10 10:57:43 -05:00
dak664 ad67c573de Fix unused variable warning 2011-03-10 10:37:15 -05:00
dak664 de7bcda99f avrdude and makefile changes suggested by Georg von Zengen 2011-03-08 13:07:00 -05:00
Enric M. Calvo 127a3d03ad Added IPv6 z1-websense demo w/MSP batt&temp sensor 2011-03-08 09:27:38 +01:00
Enric M. Calvo 13ff778d73 added temperature-sensor to Makefile.common 2011-03-08 09:20:35 +01:00
Enric M. Calvo 7fc41e1706 M Makefile.common to add tmp102 sensor by default 2011-03-07 21:23:58 +01:00
Niclas Finne a199ae920e Changed the order in which io.h and signal.h is included. Some versions of mspgcc4 seem to have a problem when signal.h is included before io.h. 2011-03-07 20:54:02 +01:00
Niclas Finne ccc0a3f7c4 Changed LEDS_ALL to 8 leds for the JCreate platform 2011-03-07 20:12:26 +01:00
Fredrik Osterlind dd7cec737d removed obsolete leds_[color]() functions, replaced by leds_{on,off}() 
allow LEDS_[COLOR] to be configured by platform-conf
 2011-03-03 17:48:32 +01:00
Enric M. Calvo 0c6fd04f44 Modified contiki-conf.h and added sensys-scanner. 2011-03-03 13:44:28 +01:00
Fredrik Osterlind 499c13a357 removed execute flag of source files (avoids diff problems with egit) 2011-03-01 18:16:42 +01:00
dak664 7f3c198a78 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-02-28 16:32:48 -05:00
dak664 1e7479f8e4 Add periodic print of stack monitor and neighbors/routes. 
Refactor PRINTFs.
 2011-02-28 16:26:28 -05:00
Enric M. Calvo 701a42e239 Added dummy light driver. Now skywebsense likes Z1 
The light sensor driver is mapped to the same pin as the potentiometer
in Z1 Starter Platform. sky-websense is untouched, though.
 2011-02-27 21:28:25 +01:00
Enric M. Calvo 414d926966 Sky-websense compiles for Z1 (testing) 2011-02-27 20:10:09 +01:00
Enric M. Calvo 02d097674c Corrected contiki-conf.h to include project-conf.h 2011-02-27 20:00:45 +01:00
Enric M. Calvo a779cb4d0d XXX Interrupts by cc2420 & adxl345 compatible now 
Still remains to be seen why i2cmaster.c and adxl345.c need to be added
in the Makefile.common at the very beginnig with the env. var.
PROJECT_SOURCEFILES += i2cmaster.c adxl345.c
 2011-02-27 18:02:12 +01:00
Enric M. Calvo 18e1f92f0e Set QUEUEBUF_CONF_NUM to 4 to avoid .data overflow 2011-02-27 17:52:00 +01:00
Enric M. Calvo fc51115ace optional lines in Makefile.common 2011-02-27 17:14:27 +01:00
Enric M. Calvo e0882d7769 corrected adxl345, ISR was not disabled, now it is. 2011-02-27 13:09:14 +01:00
Enric M. Calvo 404b735cc4 Fixed radio and contiki conf to get RIME working 
cc2420 isr handled at cc2420-arch, disabled accel. interrupts and modified
platform/z1/contiki-conf.h to use same mac as sky.
Added example-broadcast-button, sends packets every second or when button pushed.
Works with other Z1s and Sky
 2011-02-27 12:35:19 +01:00
Enric M. Calvo 9acdb98a56 Added a quick sht11 sensor driver support for Z1 
Support for Sensirion SHT1x/SHT7x support is adapted from core for Z1 in the Ziglet port.
XXX TODO:
 + Remove SHT11_PWR
 + Lines are shared with I2C, hence port reconfiguration must be added at the driver level.
 2011-02-26 12:41:56 +01:00
Enric M. Calvo f1fe8782b0 Removed unwanted files 2011-02-25 16:29:55 +01:00
Enric M. Calvo 44ce1699f2 Definition of Z1 Starter Platform in contiki/platforms + LEDs + Potentiometer 2011-02-25 16:08:50 +01:00
Enric M. Calvo 3ec4143252 Added Potentiometer sensor in Z1 Platform 2011-02-25 16:01:40 +01:00
Enric M. Calvo 43db4fd10e Added MAC overwriting/burning capability to the Z1 
Added compilation parameter "nodemac=1234" that can be used
to overwrite the MAC at compilation time, and that combined
with the burn-nodeid app can record a prestablished MAC on ext. mem.
 2011-02-25 15:35:41 +01:00
Enric M. Calvo 659f36eb79 Updated *-sensor.c files from the sky platform. 
Fixed battery-sensor plus added simple test (XXX)
 2011-02-25 15:35:41 +01:00
Mariano Alvira 05a4961604 econotag: generate EUI64 mac adresses properly 2011-02-23 15:20:08 -08:00
Mariano Alvira e9c904a74c econotag: turn DEBUG off by default 2011-02-23 15:19:44 -08:00
Mariano Alvira c2c70a22df mc1322x: setup hardware addresses and enable AUTOACK mode if 
configured
 2011-02-23 15:19:44 -08:00
Mariano Alvira e826ccd3b9 add NULLRDC_CONF_802154_AUTOACK_HW for radios that only pass-up NOACK 
status but not the actual ack packet.
 2011-02-23 15:19:44 -08:00
dak664 ef4bb08c3e Add stack monitor. Change internal uip address to 200 for RPL. 2011-02-23 14:14:21 -05:00
Lionel Debroux 5cb49e8b07 Several compiler warning fixes: 
* msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h;
     * sky: fix a couple pointer target signedness warnings;
     * core: fix several signed/unsigned comparison warnings;
     * framer-802154: "const static" -> "static const" to fix compiler warnings;
     * core: comment or remove unused variables and function definitions.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Mariano Alvira <mar@devl.org>
 2011-02-20 19:28:14 -05:00
Enric M. Calvo 1b2878baa4 Corrected some typos in the PORT1 ISR function. 2011-02-16 12:02:36 -05:00
Fredrik Osterlind 747eafd5f0 support for tinyos style node ids, to simplify testbed experiments 
with automatic node ids
 2011-02-11 15:27:14 +01:00
Fredrik Osterlind a501816472 example of adding cooja-platform mote interface manually 2011-02-11 15:23:59 +01:00
Nicolas Tsiftes 39ea9405bb Added a function for setting the I/O semantics on a Coffee file descriptor. Changed the configuration parameters slightly and updated the platform definitions to reflect this change. 2011-02-09 15:03:57 +01:00
Mariano Alvira ad200384ac add a dummy light sensor for econotag 2011-02-08 09:07:45 -05:00
Mariano Alvira 227b72c88d add dummy node-id.h for econotag 2011-02-08 09:07:34 -05:00
Mariano Alvira 9572baa71b fix mc13224v led driver to only touch gpio used for leds. 2011-02-08 09:07:11 -05:00
Mariano Alvira dbe6407a22 change mc13224v button-sensor to use gpio structs 2011-02-08 09:07:03 -05:00
dak664 bbcd43a9aa Merge branch 'master' of github.com:adamdunkels/contiki-2.x 2011-02-07 15:14:54 -05:00
dak664 71612fd6a4 Replace file, some problem with my local master line endings. 2011-02-07 15:12:54 -05:00
dak664 b33b89216f Delete obsolete file 2011-02-07 14:35:19 -05:00
dak664 574feaa866 Test web-based commit, see if it fixes the line endings. 2011-02-07 11:25:07 -08:00
dak664 574927c776 Delete obsolete file 2011-02-07 14:07:37 -05:00
dak664 519cce0019 Add comments, bugfixes, merge avr-atmega128rfa1 platform changes to avr-raven 2011-02-07 14:06:53 -05:00
dak664 62b894e560 Add avr-atmega128rfa1 platform based on Michael Hartman's board (single LED peripheral) 2011-02-07 13:15:21 -05:00
David Kopf ceea35f7a8 Test TortoiseGit commit from Vista laptop 2011-02-04 10:41:18 -05:00
David Kopf 16df31b143 Merge branch 'master' of https://github.com/adamdunkels/contiki-2.x 2011-02-04 10:39:34 -05:00
dak664 0b23116c30 Test TortoiseGit commit from windows 7 2011-02-04 09:03:03 -05:00
David Kopf c18d12e8a4 Test git commit 2011-02-03 18:29:17 -05:00
oliverschmidt 10a7bb2579 Made Atari build compabile with make.exe from GnuWin32 and cmd.exe. cmd.exe comes with a builtin mkdir which doesn't understand -p. However -p isn't necessary as long as the disk creation works - and therefore the directory is successfully deleted. 2011-01-23 16:25:45 +00:00
nvt-se 375e1d76ef Print the error if select fails 2011-01-21 14:19:57 +00:00
enricmcalvo 594d033c04 Added device drivers for tmp102 sensor for the Zolertia Z1 platform. 2011-01-20 10:28:00 +00:00
nifi 3d28da8813 Coffee no longer uses watchdog calls 2011-01-18 15:49:37 +00:00
nifi 1e69c4c795 Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up 2011-01-18 15:48:38 +00:00
nvt-se 9ad02dbdd8 Removed header inclusion 2011-01-18 14:58:39 +00:00
nvt-se 28421f1fe2 Removed watchdog calls from Coffee 2011-01-18 14:06:33 +00:00
nvt-se 00ac8cfaa0 Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up 2011-01-18 14:03:55 +00:00
adamdunkels 34f2d3e025 Disable timesynch by default - it is not well-tested enough yet. 2011-01-09 21:04:14 +00:00
adamdunkels a6fe42f60f Restart CC2420 SFD interrupt after DCO calibration only if it is enabled. 2011-01-09 21:03:42 +00:00
nvt-se 4003c3a8c9 do2unix conversion 2011-01-05 17:02:15 +00:00
joxe 2e1c856741 added support for avoiding sleeping in LPM3 when DCO needs to be running - needed for uart DMA 2011-01-05 12:04:23 +00:00
dak664 90a6d768ea Keep track of sleeptime and display on status web page. 2010-12-23 19:41:07 +00:00
dak664 013c3ac2f8 Remove contitional on clock updating, it should always be done after a sleep! 2010-12-22 17:09:03 +00:00
dak664 44a2e34005 Resolve TIMER2 conflict between sleep and possible clock usage. 2010-12-22 16:50:30 +00:00
dak664 7b7ad4336e Send text following ? in GET to Raven LCD 2010-12-20 20:06:06 +00:00
dak664 ac68ced90a Add polyphonic ringtones for received messages. 2010-12-20 20:03:56 +00:00
dak664 8af150ec0b Send temperature and voltage to 1294p webserver on startup by default. 2010-12-20 19:58:42 +00:00
dak664 b87694e272 Update documentation 2010-12-19 17:13:29 +00:00
dak664 6d1c060564 Modify menu chart for sleep and doze, add raven picture for doxygen 2010-12-19 17:12:13 +00:00
dak664 b438b78097 Fix configuration for RPL build (no packet queuing, default no TCP) 2010-12-18 22:37:02 +00:00
dak664 9575daede2 Add working cx-max configuration values. 2010-12-18 20:53:36 +00:00
dak664 d378d891c8 Add working cx-mac configuration values. 2010-12-18 20:46:14 +00:00
dak664 89d0ffffd2 Save radio ontime when webwser displays current cpu ontime for later display of corresponding value after possible TCP delays. 2010-12-18 20:44:02 +00:00
dak664 8586643d14 Implement SLEEP and DOZE commands from the 3290p menu. 
Define serial commands the same as the 3290p for grepping.
 2010-12-18 20:40:45 +00:00
dak664 555fab59a3 Add SLEEP and DOZE functions to the menu. 
Give serial commands the same defines as in the 1284p for grepping.
 2010-12-18 20:35:58 +00:00
adamdunkels e55c3cd471 Enable DCO configuration override 2010-12-16 22:52:27 +00:00
adamdunkels 37e65264a8 Hack: reenable cc2420 SFD interrupts after resyncing the DCO. The DCO code currently messes up the SFD interrupt settings. 2010-12-16 22:52:12 +00:00
adamdunkels 6a80106236 Turn on timesynch by default 2010-12-16 22:51:22 +00:00
dak664 aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
nvt-se 404230a047 Added a macro for portable watchdog calls. 2010-12-15 14:01:07 +00:00
salvopitru 5f40a5d63e Added serialdump utility from sky folder to stm32w folder. It has one more option for limiting upload speed. 2010-12-15 11:18:09 +00:00
dak664 ced88c2eff Give jackdaw fe80::0 address and number webservers from fe80::1 2010-12-14 23:22:01 +00:00
dak664 1d2a5ca671 Minor format and comment changes 2010-12-14 22:51:04 +00:00
dak664 d8fe44645c Refactor, tune, add SICSLOWPAN_CONF_ACK_ALL defines for testing radio acks 2010-12-14 22:39:38 +00:00
dak664 a9dedfee4f Refactor contiki-conf files, remove obsolete defines. 2010-12-13 23:31:13 +00:00
dak664 e06dada659 Update platform build for hello-world, includes patch from Tobias Schfer 2010-12-05 20:21:19 +00:00
dak664 8e38f5ee34 Fix comment, add WEBDIR=default to force rebuild with default web content 2010-12-05 17:32:50 +00:00
dak664 35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
kasunch 753cd22d56 Changing line ending to LF 2010-12-04 08:22:10 +00:00
dak664 1ca7f7f940 Apply patch from Tobias Schfer to enable hello-world build. Untested otherwise. 2010-12-03 21:39:33 +00:00
dak664 58b7a19803 Hardware/software radio HAL patch from Roger Larsson. 
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
 2010-12-03 20:42:01 +00:00
dak664 09c45f0497 Add address, neighbor, routes cgi's 2010-12-02 15:37:13 +00:00
dak664 6f66d45917 Add status web page with addresses, neighbors, routes 2010-12-02 15:28:38 +00:00
dak664 30885ba4ce Do clock init before any RS232 output 2010-12-01 16:30:34 +00:00
dak664 3d3ad9e2c2 Fixes to allow ipv4 (hello world) builds 2010-12-01 16:23:55 +00:00
dak664 c027c1664a Informative error when bogus platform is used in a contiki build 2010-12-01 15:09:06 +00:00
zhitao af7b81efdb resolved conflict with type declaration 2010-12-01 10:19:58 +00:00
dak664 5a4fa388da Refuse to play ping-pong with host interface 2010-11-29 21:22:41 +00:00
dak664 0735b431aa Enable RPL neighbor webserver page 2010-11-29 21:21:36 +00:00
dak664 dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
adamdunkels 353bb07cc9 Changed the RDC rate configuration name to the new configuration name 2010-11-26 12:09:04 +00:00
dak664 880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
nifi 3bd78893e5 Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc. 
nullrdc (previously nullrdc-framer) is now a RDC implementation that
does not do any radio duty cycling but supports link layer addresses
and frame format via framer (for example 802.15.4). nullrdc can now be
used in the same way as contikimac, xmac, etc.

nullrdc-noframer (previously nullrdc) is a null RDC implementation
that does not do any radio duty cycling, does not add any header of its
own to the packets, and does not support link layer addresses.
 2010-11-23 18:11:00 +00:00
dak664 da8ad17c02 Save 256 bytes of RAM by excluding floating point routine 2010-11-21 17:56:36 +00:00
dak664 b3324c6d23 Add menu option to temporarily disable RS232 debug output for higher 6lowpan throughput. 
Functional rpl with RNDIS/Ubuntu (tested on Raven single hops)
 2010-11-19 20:02:25 +00:00
dak664 c6c81acede Add optional pings to google and cisco 2010-11-19 19:44:10 +00:00
dak664 fe19719a16 Fix printf_P error 2010-11-18 14:33:10 +00:00
adamdunkels 9446d37285 Increased the default Cooja CFS size to 4000 bytes so that examples work (found by Roger Larsson) 2010-11-15 21:44:37 +00:00
enricmcalvo f4c1953563 Added temporary definition of P1SEL2 for those mspgcc4 without complete port register definitions. 2010-11-14 21:59:02 +00:00
dak664 cc7fea92d2 Force ipv6 when building with fakeuip 2010-11-13 16:28:46 +00:00
dak664 72d49c20af Allow non-ipv6 build (hello world) 2010-11-12 20:49:03 +00:00
dak664 9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
fros4943 0a8d898678 #ifndef'd elfloader's default memory usage 2010-11-11 13:56:02 +00:00
enricmcalvo 436e4dce1c Updated accelerometer drivers to avoid conflicts with radio transceiver. 2010-11-10 13:46:39 +00:00
fros4943 3563089a91 reimplemented initial support for referencing contiki source files in cooja projects 2010-11-10 13:11:43 +00:00
maralvira 5b4c63440b fix typos 2010-11-09 01:30:38 +00:00
oliverschmidt 7432afa036 Both apps/webbrowser and apps/webserver contain a http-strings.c so the object files generated overwrite each other. However, currently webserver/http-strings.c is a clean superset of webbrowser/http-strings.c so using only that one even in the www.prg project makes things (sort of) work. 2010-11-07 23:36:34 +00:00
maralvira 24b6071234 change maca_raw_mode to contiki_maca_raw_mode 2010-11-07 18:39:39 +00:00
maralvira 3747f9a7c5 use the nullmac and nullrdc with framer layer. 2010-11-07 18:36:52 +00:00
maralvira e029fa8da0 fix defines for raw mode 2010-11-07 18:34:52 +00:00
maralvira 8cd50c90ba initial commit for the redbee-dev platform 2010-11-07 13:56:17 +00:00
maralvira 26725e7c19 use sicslowmac_driver instead of contikimac_driver --- since contikimac 
power saving doesn't seem to be working.
 2010-11-07 13:46:03 +00:00
enricmcalvo 01f886dad9 Slight modification to clean properly 2010-11-07 08:40:24 +00:00
enricmcalvo 59bdebe842 Added I2C Master drivers and accelerometer drivers 2010-11-07 08:38:51 +00:00
dak664 acd9d516d8 Add RPL neighbors and routes printout to Jackdaw menu 2010-11-05 20:35:15 +00:00
joxe f08e262055 fixed buggy config of phidget sensors for Z1 2010-11-05 10:31:57 +00:00
dak664 abf4791db4 Add Raven RPL build option 2010-11-03 16:51:55 +00:00
adamdunkels 896f627290 Made uIPv6 packet queueuing configuration configurable 2010-11-02 11:06:01 +00:00
oliverschmidt 0d1db1a78b Since a few days the cc65 trunk contains a POSIX dirent implementation for the Atari. Until a new cc65 release is available - and Contiki has switched to that release - I'll borrow the implementation from the cc65 trunk. 2010-11-01 19:44:34 +00:00
dak664 9194b3ac69 Fix error when RS232 not enabled 2010-10-28 19:31:28 +00:00
dak664 ad6712736b Fix Windows XP RNDIS+CDC serial port enumeration 2010-10-28 19:30:14 +00:00
oliverschmidt 0ef1171705 Just always call process_run() and etimer_request_poll() in turn - like the "major" platforms do. 2010-10-27 22:17:39 +00:00
dak664 258e3cc93a Allow simultaneous use of RS232 and USB serial ports 2010-10-27 14:51:20 +00:00
salvopitru d8711d32a3 Added configuration in order to run Rime. 2010-10-27 14:05:23 +00:00
oliverschmidt 46122f558f Skip the CBM volume header. 2010-10-26 18:56:39 +00:00
joxe dfff488a3d configured tmote sky to use 5 retransmissions 2010-10-26 13:26:16 +00:00
salvopitru ec5e3ce0d7 New Contiki port to STM32W108. 2010-10-25 09:03:38 +00:00
adamdunkels 726bd0e58e Made collect neighbors, queuebuf number, uip-ds6 configuration settable through project-conf.h 2010-10-24 21:12:31 +00:00
dak664 123e3cae41 Fix compiler warnings 2010-10-23 15:26:46 +00:00
oliverschmidt 5e10cf2eed Implemented cfs_opendir() and friends for CBMs based on cc65's cbm_opendir() and friends. 2010-10-23 13:48:06 +00:00
oliverschmidt 9e9eb4b55c There's no point in pulling in cfs-posix-dir.c if the POSIX functions it depends on are dummies anyway. 2010-10-23 08:17:45 +00:00
joxe a1e7d9c256 fixed some config params to avoid re-defining if already defined 2010-10-21 18:25:39 +00:00
adamdunkels 37a4200f40 Made a lot of things configurable via the (optional) project-conf.h 2010-10-20 22:21:16 +00:00
oliverschmidt da7c9700cb Added support for the FTP standalone client to the c128 target. 2010-10-19 22:41:24 +00:00
oliverschmidt bcc2120570 Added support for the FTP standalone client to the c64 target. 2010-10-19 22:31:59 +00:00
oliverschmidt 842c6a018a The recent global change regarding htons allowed to remove this hack :-) 2010-10-19 20:30:47 +00:00
adamdunkels 5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro 
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
 2010-10-19 18:29:03 +00:00
kasunch 5a46c629de Added missing slip.c file to CONTIKI_TARGET_SOURCEFILES 2010-10-19 17:05:45 +00:00
oliverschmidt f4e2c41c76 Added support for the FTP standalone client to the atari target. 2010-10-16 11:42:40 +00:00
oliverschmidt abe360e9fb Added support for the FTP standalone client to the apple2enh target. 2010-10-16 10:41:46 +00:00
oliverschmidt b943e73b9b Made default IP config identical to minimal-net and log the IP config similar to minimal-net. 2010-10-15 21:14:18 +00:00
nifi 9a4d17fe7c Bug fix: put device in standby mode at startup in case it has previously been put in deep power-down mode; patch by Martin Bor 2010-10-12 22:55:11 +00:00
oliverschmidt a5df3e8d00 Removed unnecessary include. 2010-10-12 19:57:44 +00:00
oliverschmidt 284f7166b7 Allow standalone win32 programs to exit the Contiki process by calling LOAD_UNLOAD(). 2010-10-12 11:03:53 +00:00
adamdunkels 93f6fda353 Updated configuration options to reflect recent changes. Increased number of queuebufs. Corrected the name of the collection neighbors option. 2010-10-03 20:40:42 +00:00
oliverschmidt 3c733a0c4e Added section on 'dir2atr' now that there's an "official" download. 2010-10-03 11:01:32 +00:00
oliverschmidt 828378ab47 Replaced "retro" color scheme with ergonomic color scheme. 2010-10-03 10:30:53 +00:00
oliverschmidt 23aea9df35 On the Atari it seems reasonable to start on a clear b&w screen even for non-CTK apps. 2010-10-02 22:07:24 +00:00
oliverschmidt 5d54b6aba8 Now that I understand that the Atari is in fact monochrome using black & white seems the logical consequence. 2010-10-01 20:27:06 +00:00
oliverschmidt f3b4024375 Give the use a chance to read an error message before returning to the DOS menu (like on the Apple II). 2010-09-29 21:11:21 +00:00
oliverschmidt c839eacbdf Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/. 2010-09-29 19:44:01 +00:00
oliverschmidt f70d4c600d Minor wording change. 2010-09-29 12:07:02 +00:00
oliverschmidt cd24e920b6 Made cfs-based webserver example compatible with 8.3 file systems. 2010-09-28 20:40:52 +00:00
oliverschmidt 8eeeef17d1 Made cfs-based webserver example compatible with 8.3 file systems. 2010-09-28 19:36:16 +00:00
oliverschmidt b2fe3db298 Just name the binary always 'contiki'. 2010-09-28 19:23:30 +00:00
fros4943 93b953f815 moved contiki-specific initialization to separate function 2010-09-24 12:59:06 +00:00
kasunch 75e4e80df2 Adding machine dependent SLIP routines source file to the sources list 2010-09-20 18:34:14 +00:00
kasunch ce8bb8df9c Adding machine dependent SLIP routines for UART0. 2010-09-20 18:30:25 +00:00
kasunch 6104922c40 Added new network initialization source file to the sources list. 2010-09-20 18:22:28 +00:00
kasunch 4ebc114e90 Now, all network related initialization code segments are in one file 2010-09-20 18:15:27 +00:00
kasunch 3f1bea1ed3 1. Initialized SLIP when uIPv4 or uIPv6 is used. 
2. Random number generator is initialized using both node id and unique hardware id
3. Printing MAC address is moved to network initialization section.
 2010-09-20 18:07:25 +00:00
kasunch cdc68b13e0 1. Added uIPv6 configuration options. 
2. Fine tuned some configuration options to save RAM.
 2010-09-20 17:56:14 +00:00
dak664 110bc0242e Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum 2010-09-17 21:59:09 +00:00
dak664 dc9f16131c Make fake routines conditional on CONTIKI_NO_NET 2010-09-14 19:16:53 +00:00
dak664 6d3c276e7e Add rpl configuration and webserver options. 2010-09-14 19:13:05 +00:00
dak664 b9b4f07ad9 Add internal webserver option 2010-09-14 17:03:29 +00:00
dak664 0858f71e6a Add rpl webserver option 2010-09-14 16:59:44 +00:00
oliverschmidt 6e5e560e33 Up to now *all* Contiki apps for the Apple2 were built for maximal RAM - which means that they can't return to OS level but must reboot on exit. However many apps can get along well with 1kB less memory - which allows them to exit to the OS. 
Therefore now the default is 1kB less memory - and apps actually needing maximal RAM can get it by adding WITH_REBOOT to their DEFINES.
 2010-09-08 22:50:56 +00:00
joxe f02cdc7c8f minor polish to the phidget sensor driver 2010-08-27 12:58:57 +00:00
joxe 53840aca67 added basic phidget support for the Z1 2010-08-27 12:17:40 +00:00
nifi 91be7cebc4 Node ID is stored in external flash and restored on bootup 2010-08-26 22:08:11 +00:00
dak664 3bee71ad81 Add simple webserver for RPL status 2010-08-26 18:55:43 +00:00
joxe a461eceff8 fixed configuration of button sensor 2010-08-26 16:01:20 +00:00
joxe 2c5f5cd849 added init of xmem for z1 platform 2010-08-26 09:16:39 +00:00
nifi 7d34fd1deb Added Sentilla USB platform. This platform is similar to the Sky platform but without the sensors and with 2 leds. 2010-08-25 19:57:33 +00:00
nifi 14873a923b Added temperature sensor for the builtin temperature sensor in MSP430 2010-08-25 19:34:06 +00:00
nifi 198db63c3b Moved the ADC configuration to sky-sensors.c and sensors now only need to specify their sample channel. This helps to avoid conflicts when using multiple sensors. 2010-08-25 19:30:52 +00:00
joxe d946fdd574 added Z1 xmem + coffee driver 2010-08-25 17:28:15 +00:00
joxe 645c48a332 added Z1 platform 2010-08-24 16:26:38 +00:00
joxe b04ebb2b29 minor fix for making the msp430 makefile work for msp430X arch 2010-08-24 16:24:11 +00:00
oliverschmidt 164d55e39d Reduced MTU size in order to allow for a reasonable (and full screen width) URL length. 2010-08-14 08:32:00 +00:00
dak664 885fee3561 Add RPL border router process 2010-08-06 17:39:31 +00:00
dak664 75de6f9fb0 Rerevert to misspelled HARWARE_REVISION 2010-08-03 21:42:05 +00:00
dak664 ea9e5bef1c Revert mistaken hardware name change! 2010-08-03 20:18:54 +00:00
dak664 f2f7c169ea Reduce RIME max time to fit in 16 bit timer 2010-08-03 20:01:21 +00:00
dak664 52feb47d5e Change RIME max time to fit in 16 bit timer 2010-08-03 19:58:35 +00:00
dak664 3a8085b159 Change RF channel to 26 for econotag compatibility 2010-08-03 19:56:27 +00:00
dak664 b706c48efd Add experimental RPL code 
Change RF channel to 26 for econotag compatibility
 2010-08-03 19:55:42 +00:00
maralvira 1cfa126568 enable sicslowpan fragmentation 2010-07-28 18:51:27 +00:00
maralvira fe16506d1d increase UIP buffer size to 1300 to allow full size ipv6 packets 2010-07-28 18:51:00 +00:00
maralvira 8dce85c308 don't need BLOCKING_TX anymore with the recent bugfixes 2010-07-28 18:50:07 +00:00
oliverschmidt e53c34770a Integrated latest enhancements contributed by Kajtar Zsolt: 
- Use cc65 C library _filetype for writing instead of fixed 'p'.
- Support for fake O_TRUNC through SCRATCH.
 2010-07-22 10:16:58 +00:00
oliverschmidt 8a6f7a1dcf The cc65 C64 memory layout offers enough memory for larger URLs so have a nice scrolling URL text entry field. 2010-07-20 22:47:42 +00:00
oliverschmidt cb929a3e5c Adjusted assembler to reference uip_aligned_buf instead of uip_buf. 2010-07-20 20:42:25 +00:00
joxe 857883558b adapted to the new spi and cc2420 naming - and split config file 2010-06-23 10:25:54 +00:00
joxe 80942abaf7 split hw config into platform-conf and adapted to new SPI and CC2420 naming 2010-06-23 10:18:05 +00:00
dak664 08897e1c1f Add explicit queuebuf and packetbuf to build 2010-06-22 17:10:24 +00:00
joxe 365db27f92 moved CC2420 configuration into the conf file 2010-06-22 06:48:43 +00:00
joxe 47053c2cdb added LOOP count configuration for cc2420dbk 2010-06-22 06:39:44 +00:00
joxe f758f6569e moved cc2420 config to platform config 2010-06-21 19:57:18 +00:00
joxe 80ec597f75 moved config from cc2420 to micaz 2010-06-21 19:53:58 +00:00
nifi 2ca32f9c76 Enabled 32-bit clock ticks to allow longer timeouts. 2010-06-21 15:15:10 +00:00
dak664 e51f03eeb1 Turn off radio DEBUGFLOW printing 2010-06-18 15:45:55 +00:00
dak664 ac6f837e4a Use RF230BB for compilation - untested! 2010-06-18 15:33:15 +00:00
adamdunkels 3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
adamdunkels 951fd78f6c ctimer moved from net/rime to sys/ 2010-06-14 18:58:45 +00:00
maralvira 994067aecd bring econotag conf in-sync with sky. 
Increase the size of the route and neighbor tables; remove the uIP
packet buffer queue for every neighbor to save RAM
 2010-06-14 15:56:09 +00:00
adamdunkels f81ca85157 Increase the size of the route and neighbor tables; remove the uIP packet buffer queue for every neighbor to save RAM 2010-06-14 07:04:20 +00:00
fros4943 8f1988e7fc using OBJECTDIR instead of "obj_cooja" + bugfix: allow for externally defined CC 2010-06-11 15:17:26 +00:00
maralvira c01421fbb5 update process initialization and call ctimer_init 2010-06-09 18:05:38 +00:00
maralvira 7aa44f14d9 initial redbee-econotag commit 
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
 2010-06-09 14:46:30 +00:00
joxe c4278dedc2 replaced uip_buf with the new uip_aligned_buf 2010-06-03 11:37:50 +00:00
nifi eb63cb21e0 Added make variable with command name to show in warning 2010-05-27 12:42:48 +00:00
joxe 97fc9d2ee8 no aaaa address if configured for RPL 2010-05-25 21:32:41 +00:00
joxe 50cca91d93 made use of the new link-local address api in ds6 2010-05-09 17:53:31 +00:00
dak664 6909f291af Use siimple ethernet address translation for RF230BB by default. 
That gets pings and webserver working again for Vista and W7.
Hopefully it won't break something that already works...
 2010-05-08 17:17:17 +00:00
oliverschmidt bf3ec8c452 Reverting to the "old" plain uip_buf allows the Apple2 to revert to the previous memory layout. 2010-05-08 07:26:20 +00:00
oliverschmidt 62ca797fad The recent change turning uip_buf from an array to a pointer increases the code generated by cc65 significantly :-( 
This change modifies the set of modules placed in the Apple2 Language Card to again make maximum use of that memory without overflow.
 2010-05-07 21:02:35 +00:00
nifi 4aba60ad25 acc-sensor and ext-sensor moved to the jcreate platform 2010-05-06 13:55:21 +00:00
dak664 e78984aa25 Bugfixes and additional testing contributed by Mauro Greco. Still a probabe bug when coffee page size is a multiple of physical page size and FLASH_COMPLEMENT_DATA=0 2010-05-04 14:08:01 +00:00
nifi ed472717f2 Added Sentilla Jcreate platform. This platform is similar to the Sky platform but with other sensors and 8 leds. 2010-05-03 21:57:35 +00:00
nifi 7cebc4ed99 added missing include 2010-05-03 13:55:26 +00:00
nifi bf198ec695 Moved sensors setup to contiki-sky-platform.c and common make rules to Makefile.common for easier reuse in similar platforms 2010-05-03 13:51:11 +00:00
fros4943 79aa299531 fixed random seed for cooja motes 2010-05-02 09:42:15 +00:00
joxe aa980e3f67 removed initialization of RPL from platform main 2010-05-01 13:07:31 +00:00
joxe 3c9256c39f removed RPL routing state struct from platform config file 2010-05-01 12:04:13 +00:00
nvt-se d529132002 Added missing parts of the RPL configuration 2010-04-30 15:06:00 +00:00
joxe b0640af3a2 added rpl support for tmote sky - enabled by default 2010-04-30 13:52:14 +00:00
oliverschmidt 5dd5b5ac43 Adjusted typdefs to Cygwin 1.7 (now not compatible anymore with Cygwin 1.5). 2010-04-21 20:35:22 +00:00
oliverschmidt 5640f89259 In contrast to Cygwin 1.5 Cygwin 1.7 doesn't allow to get __argc out of thin air anymore. Instead of finding a workaround I opted to remove the whole command line checking here which was added so revisions ago. The reasoning: 
The WinPcap driver presumes to be obligatory for the application. Therefore it quits the whole application if it can't initialize successfully.

In former times the WinPcap driver required a cmdline parameter to initialize properly. The netsim target presumably doesn't consider the WinPcap driver obligatory for its applications so it checks the cmdline and starts the WinPcap driver only if it finds the WinPcap cmdline parameter present. Thus it prevents the WinPcap driver from failing to initialize which brings down the whole application.

However recently the WinPcap driver was changed to just use some default value if its cmdline parameter isn't found. So there's no more need to keep WinPcap from starting just to make sure it doesn't bring down the whole application. The presumption behind all this reasoning is that a WinPcap driver running with some (potentially wrong) default isn't worse than a WinPcap driver not running at all.
 2010-04-21 20:27:28 +00:00
oliverschmidt 8b6d34dbfc Configure maximum number of C128 web server connections indirectly via maximum number of TCP connections. 2010-04-11 21:34:18 +00:00
oliverschmidt 67e775ecee The maximum number of C64 web server connections is now equal to the (new) default as the CBM PFS allows for 10 open files. 2010-04-11 21:30:14 +00:00
oliverschmidt 8108585795 Configure maximum number of Apple2 web server connections indirectly via maximum number of TCP connections. 2010-04-11 21:23:45 +00:00
oliverschmidt ce412471e4 Integrated latest fix contributed by Kajtar Zsolt. 2010-04-06 09:46:58 +00:00
oliverschmidt f38a3ff06c Added Platform-specific File System (PFS) for the C128 contributed by Kajtar Zsolt. 2010-04-05 15:25:49 +00:00
oliverschmidt 7089ce05e2 Added Platform-specific File System (PFS) for the C64 supporting IDE64 fast R/W contributed by Kajtar Zsolt. 2010-04-05 14:11:01 +00:00
fros4943 170e4d6a99 sky simulation bug workaround: explicit write to compare register wakes up timer scheduling again 2010-03-31 13:15:32 +00:00
fros4943 c21ff48788 ip forwarding only for ipv4 2010-03-31 10:22:33 +00:00
fros4943 c2354a5797 changed cooja platform default uip4 configuration to use uip_over_mesh with a slip gateway 2010-03-31 09:39:46 +00:00
oliverschmidt 8dd2b75383 Explicitly set CBM filetypes (PRG, USR). 2010-03-31 06:05:37 +00:00
fros4943 e640c61b78 commented unused functions 2010-03-29 12:57:57 +00:00
fros4943 e3e69afd15 changed to ds6 module, instead of obsolete netif module 2010-03-29 11:52:08 +00:00
fros4943 9dfce4bea1 removed bad uip-netif.h include 2010-03-29 10:43:03 +00:00
fros4943 540f30d855 improved support for checkpointing operations via serial, several minor fixes 2010-03-29 09:48:06 +00:00
oliverschmidt 54e19782ae Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations. 2010-03-27 15:16:57 +00:00
oliverschmidt 6769e6a99f - Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations. 
- Completed declarations.
 2010-03-27 14:46:08 +00:00
fros4943 a5092220b4 fixed next timer variable types 2010-03-25 09:12:03 +00:00
adamdunkels 2a3d0dc042 Bugfix: data that has been prepared with the prepare() method must be possible to send multiple times 2010-03-23 15:19:55 +00:00
adamdunkels 432a3fd12e Bugfix: the return values from the cca method were switched 2010-03-23 15:10:27 +00:00
fros4943 1322195921 defining rtimer_clock_t to the same as clock_time_t 2010-03-23 13:34:00 +00:00
fros4943 c66dd0b1bf implemented rtimer library for simulated contiki motes 2010-03-23 13:13:17 +00:00
fros4943 49526e100f added simulated interrupt thread, currently only used to implement rtimer functionality 2010-03-23 13:12:41 +00:00
fros4943 bee0ea4834 temporarily turning on radio for sending a packet 2010-03-23 12:13:43 +00:00
adamdunkels 03d1388c0d Print out MAC and RDC when booting cooja nodes 2010-03-23 12:08:05 +00:00
adamdunkels cd3a7c7a73 Dummy watchdog implementation for cooja nodes 2010-03-23 12:07:03 +00:00
nifi 58e47d1d97 activated workaround for memcpy/memset bug in mspgcc 2010-03-21 10:44:58 +00:00
joxe 29335f2f7d added possibility to hard-code 7 bytes of the MAC address - last byte picked from nodeid 2010-03-19 14:08:15 +00:00
adamdunkels fc61ee5dbb Bugfix: turn on watchdog before starting processes to avoid a process hanging in its startup phase 2010-03-19 13:28:27 +00:00
adamdunkels 91afe5b0f4 Turned on broadcast announcements by default, turn on announcements for collect 2010-03-19 13:27:46 +00:00
dak664 9bcf982d87 Update minimal net to new ds6 interface 2010-03-18 20:11:54 +00:00
dak664 d1f1fae689 update to ds6 calls 2010-03-18 14:52:50 +00:00
dak664 f03600d4e3 update to uip-ds6.c 2010-03-18 14:36:00 +00:00
dak664 de2f5aaddc change for ds6 calls 2010-03-17 20:19:33 +00:00
joxe 7d220c910a removed uip_router 2010-03-16 15:45:20 +00:00
nifi 0299aab5e4 Fixed to use sky-sensors to setup ADC12 2010-03-15 23:37:01 +00:00
dak664 cae40439d7 Add optional RS232 debugging 2010-03-15 18:56:13 +00:00
joxe fd3d6c44d0 integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling 2010-03-15 16:41:24 +00:00
fros4943 645d505f46 contiki-cooja-main.c requires CLASSNAME 2010-03-15 11:03:17 +00:00
fros4943 5b2caf2050 removed the use of a template source file when compiling for the cooja platform, instead compiling against contiki-cooja-main.c. 
this change simplifies access to the contiki main source, and makes the cooja platform more similar to other contiki targets
 2010-03-15 11:02:57 +00:00
fros4943 89d7d926c4 added ipv4 and ipv6 default configuration 2010-03-10 12:18:29 +00:00
fros4943 7465fb812a removed explicit init-net*.c for cooja platform, instead performed in main file (contiki-template.c) 2010-03-10 12:18:07 +00:00
fros4943 f8488925eb added uip-driver (for both ivp4 and ipv6), setting WITH_UIP* compiler flags in Makefile 2010-03-10 12:15:52 +00:00
fros4943 f36cfffc99 Makefile target for uploading precompiled firmware, example: 
make upload-ihex FILE=myfile.ihex
 2010-03-10 11:46:57 +00:00
fros4943 98929bd2f5 cooja-platform netstack conf example 2010-03-10 07:35:49 +00:00
fros4943 45a6740782 radio sensor was removed 2010-03-10 07:35:09 +00:00
fros4943 48d6d1fd6d removed no longer used cooja/contiki synchronization variables 2010-03-09 08:14:31 +00:00
fros4943 0cc96ae481 net stack update: currently fixed to null* and rime. 2010-03-09 08:14:06 +00:00
fros4943 f87458c558 removed radio "sensor" (only used for signal strengths, also available in radio driver) 2010-03-09 08:12:15 +00:00
fros4943 07753fb01f updated radio driver, simplified code 2010-03-09 08:11:05 +00:00
oliverschmidt 8ca206aa6b Changed ETH64 base address from $DE10 to $DE00 as this is the default base address according to the manufacturer. 2010-03-06 13:05:16 +00:00
nvt-se 0fc1c00f09 Use LPP for radio duty cycling. 1 Hz channel check rate 2010-03-04 15:04:28 +00:00
nvt-se 20cae40694 use CSMA 2010-03-04 14:36:48 +00:00
nvt-se 2aa9d22f34 Switched to the NETSTACK API. 2010-03-04 14:16:30 +00:00
nifi efe8f200af Updated to match the new netstack api 2010-03-02 22:40:39 +00:00
dak664 d3697344ec Update for NETSTACK_CONF_FRAMER 2010-03-02 16:25:47 +00:00
dak664 7c020468b5 Remove frame.h include, expose raven_ping6 for external calls 2010-03-02 15:15:03 +00:00
nifi 1025e7337c Added configurable router module 2010-03-01 14:46:57 +00:00
nifi 5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
dak664 feb6aa0ed2 Change back to SICSLOWPAN_COMPRESSION_HC06 from SICSLOWPAN_COMPRESSION_HC01 2010-02-28 21:39:40 +00:00
dak664 39e6f6a830 Clean up, functional webserver for further testing of low power protocols 2010-02-28 21:29:19 +00:00
dak664 5debc183a9 Enable radio stats in sensor cgi as default 2010-02-26 21:38:57 +00:00
dak664 844b3a34f7 Platform 0 was matching by default 2010-02-26 21:15:28 +00:00
c_oflynn b5b77ac47a Use new HC06 2010-02-26 10:55:00 +00:00