deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
12777 commits 6 branches 13 tags 80 MiB
Commit graph

2906 commits

Author SHA1 Message Date
Jelmer Tiete 9a8e749f6f Updated cc26xx Readme to mention serial upload script 2015-11-23 11:09:05 -08:00
Jelmer Tiete d01d53978c Removed forced upload speed for the RE-MOTE platform 2015-11-23 11:09:05 -08:00
Jelmer Tiete 97095c8bb5 Updated makefiles of srf06 platform to support uploading via cc2538-bsl script 2015-11-23 11:07:19 -08:00
George Oikonomou 41ea0308a3 Merge pull request #1390 from tsparber/fix-doxygen-whitespace 
Cleanup some trailing spaces and convert tabs to spaces
 2015-11-22 11:53:01 +00:00
Simon Duquennoy ba8552555a Merge pull request #1389 from simonduq/pr/update-jn516x 
JN516x: minor fixes
 2015-11-21 12:12:55 +01:00
Simon Duquennoy 673d1d103b JN516x: minor fixes 2015-11-21 10:23:15 +01:00
Benoît Thébaudeau 5d98cb71e2 cc2538: Add support for Coffee 
Coffee is placed by default at the beginning of the flash memory, right
before the firmware. This avoids the memory gaps that there could be
before and after Coffee if it were placed after the firmware, because it
is unlikely that the end of the firmware is aligned with a flash page
boundary, and the CCA is not flash-page-aligned. Thanks to that, Coffee
is also always in the same flash area if its size remains unchanged,
even if the firmware changes, which makes it possible to keep the Coffee
files when reprogramming the firmware after a partial flash erase
command.

The default configuration of Coffee is set to use sensible values for a
typical usage on this SoC, i.e. for sensor data logging.

The default size of Coffee is set to 0 in order not to waste flash if
Coffee is unused.

COFFEE_CONF_CUSTOM_PORT can be defined to a header file to be used with
"#include" in order to override the default CC2538 port of Coffee. This
makes it possible to use Coffee with an external memory device rather
than with the internal flash memory, without having to alter the Contiki
files.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-11-19 01:22:58 +01:00
Benoît Thébaudeau cbcf1262d6 cc2538: upload: Support .bin not starting at beginning of flash 
Depending on the linker script, the generated .bin file may start beyond
the beginning of the flash memory. However, no target address was passed
to cc2538-bsl.py by the upload make target, so it used the beginning of
the flash memory in all cases.

The load address of the lowest loadable output section is now passed to
cc2538-bsl.py. The start address of the .text output section or the
address of the _text symbol could have been used too, but this would not
have been compatible with all the possible custom linker scripts.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-11-19 01:22:58 +01:00
Benoît Thébaudeau 790c253d6d cc2538: Define and use device features 
Define the available CC2538 devices and their features, and use them to
define the linker script memory regions. The .nrdata output section is
now always defined in order to trigger an error if it is used but no
memory is available for it. The CC2538 device used by Contiki is made a
configuration option, the CC2538SF53 device being the default.

This makes more sense than defining the flash memory address and size as
configuration options like previously, all the more not all values are
possible and all the features are linked by each device.

This change also makes it possible to:
 - use the correct SRAM parameters for the CC2538NF11,
 - know at build time if the AES, SHA, ECC and RSA hardware features are
   available on the selected CC2538 device.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-11-19 01:18:33 +01:00
Tommy Sparber 938a425949 Cleanup trailing spaces and convert tabs to spaces 
This commit removes trailing spaces and converts
tabs to spaces in all files affected by fix-doxygen PR.
 2015-11-18 11:09:43 +11:00
Tommy Sparber 938d17576b doxygen: Fix many warnings 
This commit fixes nearly all of the reported doxygen warnings.

I tried to not clutter the log with removed trailing spaces.
Removed whitespace and converted tab/spaces for all files affected by this commit
are in a separate branch.
 2015-11-18 11:07:58 +11:00
suman_panchal 8d139222f6 Wismote : Direct memory access using UART. 2015-11-17 20:26:43 +05:30
myrfy001 5a440dd003 off_t changed to signed to stay the same as POSIX 
On many other tool chains, like TI's new MSG430-GCC, the typedef will be conflict.
 2015-11-17 14:30:04 +08:00
Marco Grella 7e7c201c40 Updated radio parameters (in the submodule repo), to have more radio range. 2015-11-11 18:50:38 +01:00
Marco Grella 267d51acee Modified radio parameters to increase communication range. 2015-11-11 13:53:58 +01:00
Marco Grella 527903ee10 Added default BOARD value to let regression tests compile for any platform. 2015-11-11 13:48:38 +01:00
Marco Grella 41f9ca08e2 Merge with updated master. 2015-11-11 13:42:35 +01:00
Simon Duquennoy fbd78a7e3b Merge pull request #1293 from simonduq/pr/fix-warnings 
Fix a number of compiler warnings and enable -Werror in Travis
 2015-11-10 08:49:11 +01:00
Jelmer Tiete 7b4a9c8410 Small correction to cc26xx readme, code block in list was not propperly indented 2015-11-09 01:01:21 -08:00
George Oikonomou 3aa4547327 Merge pull request #1257 from bkozak-scanimetrics/cc26xx_fully_turnoff_radio 
CC26xx - fully shutdown the rf-core & abort rx op
 2015-11-04 15:45:05 +00:00
Antonio Lignan 6037e269a8 Merge pull request #1336 from sumanpanchal/z1-uart0-dma 
Zolertia Z1: Direct memory access using UART.
 2015-11-02 08:47:08 +01:00
George Oikonomou 984b8cd631 Configure ContikiMAC timings for CC13xx sub-ghz operation 
This is required so that ContikiMAC will keep working correctly after the recent change that also turns off the RF analog part during duty cycling.
 2015-11-01 23:21:04 +00:00
Oliver Schmidt 1639b712bb Removed CC_FASTCALL. 
CC_FASTCALL was introduced many years ago for the cc65 tool chain. It was never used for another tool chain. With a798b1d648 the cc65 tool chain doesn't need CC_FASTCALL anymore.
 2015-11-01 18:10:17 +01:00
suman_panchal 35cc40563e Zolertia Z1: Direct memory access using UART. 2015-10-31 11:45:13 +05:30
Oliver Schmidt 5443c740e9 Added 80 column IRC client / web browser for the C64. 
Recently support for 80 column CONIO based on 320x200 graphics was added to the cc65 C library for the C64. This change leverages this for the IRC client and the web browser. Because not everybody prefers this 'soft80' display with its small 4x8 charbox the 40 column programs are still available as before (with the new programs called 'irc80' and 'webbrowser80').
 2015-10-30 16:48:00 +01:00
Oliver Schmidt fb5d0b7ef0 Made 80 column display a cc65 application attribute. 
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.

I see three types of application:

* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig

* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget

* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser

Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
 2015-10-30 12:42:58 +01:00
Oliver Schmidt 634db88fe0 Adjusted cc65 constructor to recent cc65 change. 
With 0ee9b2e446 cc65 constructor may not use the BSS anymore.
 2015-10-29 22:25:48 +01:00
Oliver Schmidt 5024468c2f Rearranged ATARI memory usage. 
The cc65 memory map for the ATARI XL has two holes so the linker needs hints which object files go where. Source changes lead to object file size changes requiring now and then to rearrange the object files.
 2015-10-28 12:22:43 +01:00
Marco Grella e261cda8dc Compilation flags update: BOARD=ids01a4/5 SENSORBOARD=iks01a1 2015-10-27 12:12:59 +01:00
Nicolas Tsiftes 17714c2111 Merge pull request #1299 from sumanpanchal/wismote-nodeid-burn-restore-frm-xmem 
Burn and restore node id using external flash of Wismote
 2015-10-26 18:41:28 +01:00
suman_panchal 5a07279c4f Burn and restore node id using external flash of Wismote 2015-10-24 18:24:38 +05:30
Benoît Thébaudeau bf41de1be5 Merge pull request #1078 from drandreas/cc2538-crypto 
cc2538: Add PKA drivers, ECC algorithms and examples
 2015-10-21 11:24:35 +02:00
Simon Duquennoy 4edfb3671f Merge pull request #1315 from simonduq/pr/fix-jn516x-uart-printf 
jn516x uart-driver.c: use DBG_vPrintf instead of printf.
 2015-10-20 15:57:12 +02:00
Simon Duquennoy 810036e4f3 jn516x uart-driver.c: use DBG_vPrintf instead of printf. Issue https://github.com/contiki-os/contiki/issues/1314 2015-10-20 14:56:51 +02:00
Simon Duquennoy 2daa3d7377 Merge pull request #1269 from tadodotcom/tmp-uip-fallback-iface 
More flexibility for the fallback interface
 2015-10-20 11:33:14 +02:00
Simon Duquennoy c13274c550 jn516x platform: fix compiler warnings to enable -Wall -Werror compilation 2015-10-20 10:11:45 +02:00
Simon Duquennoy 7d55e89563 jn516x: enable -Wall 2015-10-20 10:11:43 +02:00
Adam Dunkels d48cf89e9b Fixed compiler warnings for the AVR platforms 2015-10-20 10:11:42 +02:00
Adam Dunkels c1ed924c67 Spell fix in function name 2015-10-20 10:11:38 +02:00
Simon Duquennoy aec8af25c0 jn516x: added WERROR 2015-10-20 10:11:22 +02:00
Simon Duquennoy 5ac4c2c867 Target cooja: fixed funciton prototype of uip_driver_send 2015-10-20 10:11:18 +02:00
Simon Duquennoy b0f21747e1 Target cooja: added missing declaration of simlog_char 2015-10-20 10:11:17 +02:00
Simon Duquennoy 43adbbf6f9 Target cooja: added missing includes 2015-10-20 10:11:16 +02:00
Simon Duquennoy 7328ee51ef micaz: added missing include 2015-10-20 10:11:14 +02:00
Simon Duquennoy 2533265d30 eval-adf7xxxmb4z: declare node_id only when needed 2015-10-20 10:11:13 +02:00
Simon Duquennoy 45af3adab4 exp5438: do not use char as array index 2015-10-20 10:11:04 +02:00
Simon Duquennoy 1957ecd94a exp5438: removed unused vairable 2015-10-20 10:10:18 +02:00
Simon Duquennoy c796ab418f exp5438: added missing include 2015-10-20 09:38:25 +02:00
Simon Duquennoy 2007863922 mbxxx: fix printf format 2015-10-20 09:37:26 +02:00
Simon Duquennoy fcd0302d02 mbxxx contiki-main.c: include uip-debug, as uip_debug_lladdr_print is used in main 2015-10-20 09:37:25 +02:00
Simon Duquennoy 16dd3af1e6 mbxxx temperature-sensor: remove unused variable 2015-10-20 09:37:24 +02:00
Simon Duquennoy 921a3c8a7b native platform: removed unused variable 2015-10-20 09:37:19 +02:00
Simon Duquennoy 10bd49a71a Merge pull request #756 from sieben/dos2unix 
dos2unix fix
 2015-10-18 20:26:07 +02:00
AntiCat d631270af4 cc2538: Add PKA drivers, ECC algorithms and examples 2015-10-18 20:14:17 +02:00
kkrentz c865982df5 JN516x: Call LLSEC.init instead of LLSEC.bootstrap 2015-10-15 00:41:12 -07:00
Simon Duquennoy bfeff0488d Port JN516x ccm-star implementation to new ccm_star_driver interface 2015-10-14 09:20:44 -07:00
Konrad Krentz b522c042ec llsec: Replaced bootstrap function with a simple init function 2015-10-14 08:21:40 -07:00
Oliver Schmidt 1b2028f1e0 Merge pull request #1302 from oliverschmidt/master 
Removed mouse pointer initialization.
 2015-10-09 22:22:07 +02:00
Marco Grella fc65757114 License headers and code style fixes. 2015-10-09 19:40:39 +02:00
Oliver Schmidt 43ac818dd2 Removed mouse pointer initialization. 
Now the cc65 C library for CBM takes care of this.
 2015-10-09 19:35:31 +02:00
Vladimir Pouzanov fee4476605 Fixed detection of windows-native 2015-09-29 10:36:18 +01:00
Simon Duquennoy 6d4f50e53a Merge pull request #1282 from farcaller/nativenet 
Basic NETSTACK_CONF_RADIO based on kernel 802.15.4
 2015-09-28 19:30:38 +02:00
Simon Duquennoy 2231cc9b0f Merge pull request #1266 from drugo72/avr-revival 
AVR revival: new battery and temperature sensors and er-rest-example for the Raven
 2015-09-28 17:52:26 +02:00
Mariano Alvira 94daacd244 Merge pull request #817 from SmallLars/econotag-ecc 
Addet ECC functions on elliptic curve secp256r1.
 2015-09-28 09:45:11 -05:00
Mariano Alvira ff7129dc53 Merge pull request #881 from drugo72/avr-fixes 
Avr fixes
 2015-09-28 09:41:21 -05:00
Vladimir Pouzanov bd1b7d9814 Fixed linuxradio compilation issues with native and minimal-net 2015-09-28 12:48:01 +01:00
Vladimir Pouzanov 4c8618e6ba Extracted linuxradio device name to contiki-conf 2015-09-28 12:48:00 +01:00
Vladimir Pouzanov 52c90519d9 Fixed missing #includes and restricted linuxradiodrv compilation to linux 2015-09-28 12:48:00 +01:00
Vladimir Pouzanov 867368b929 Basic NETSTACK_CONF_RADIO based on kernel 802.15.4 2015-09-28 12:47:11 +01:00
Simon Duquennoy f9537b6355 Merge pull request #1219 from simonduq/jn516x-port 
NXP JN516x Platform
 2015-09-25 12:09:52 +02:00
Lars Schmertmann 17ff3bb466 Added ECC functions on elliptic curve secp256r1 2015-09-24 14:11:20 +02:00
Simon Duquennoy bd7d45080d Added NXP JN516x platform 2015-09-23 14:38:31 +02:00
Cristiano De Alti 018be89b11 Revert abs -> ABS change from commit 0dab6926b3. 
The avr-ravenlcd cannot include sys/cc.h since this in turns includes contiki-conf.h
which the avr-ravenlcd does not have.
 2015-09-22 23:32:17 +02:00
Cristiano De Alti 7b5c57c892 See https://sourceforge.net/p/contiki/mailman/message/31702228/ 2015-09-22 23:32:17 +02:00
Cristiano De Alti 8e02955c3d Fix menu. How could it worked before? Also added a macro to disable JTAG using inline assembly 2015-09-22 23:32:17 +02:00
Cristiano De Alti a3435952ef Only output data and text sections to the hex file 2015-09-22 23:32:17 +02:00
Cristiano De Alti 65e70baa84 Tables must be const in order to be put into read-only section by means of __attribute__((progmem)) (avr-gcc 4.7.0) 2015-09-22 23:32:17 +02:00
Cristiano De Alti abac0f0381 Fix compilation of er-rest-example 2015-09-22 23:32:17 +02:00
Víctor Ariño 561e70b18e Updated current fallback_interface(s) to return int. 2015-09-22 12:53:04 +02:00
Cristiano De Alti d2528caa85 Implement battery and temperature sensors. 
On the raven, the battery and temperature readings are available
from the companion 3290 cpu over the serial line.
Modify the existing raven-lcd-interface application to export
these sensors.
 2015-09-21 22:45:57 +02:00
Lars Schmertmann 46ffc509c1 Added App/Tool/Example for usage of additional flash on econotag/mc1322x 2015-09-14 20:43:12 +02:00
Marco Grella 875bfd0a1a Updates of REAME files (main and submodule). 2015-09-11 15:56:12 +02:00
Marco Grella 87970a88a4 Comments and documentation fixes. 2015-09-10 14:28:08 +02:00
Mattias Buelens 72aac552ef Cooja: Track CFS file size 
Previously, the Cooja mote assumed that its file was always initially empty (file.endptr == 0). Therefore, a file uploaded to a mote's CFS could never be read by the mote, as the mote would prevent reads from going past the EOF (indicated by endptr).

By tracking the file size and making it accessible to Cooja, the correct size of the uploaded file can be reported to the mote and allow it to read the uploaded file.
 2015-09-09 23:06:09 +02:00
Nicolas Tsiftes bebf0f9156 Merge pull request #1246 from nvt/wismote-fixes 
Minor fixes for the WisMote platform
 2015-09-08 13:52:45 +02:00
Marco Grella b7459a12c1 Added radio sensor. 2015-09-07 19:59:03 +02:00
Rémy Léone 7a5071dd30 Adding a gitattributes and correcting line-endings 
https://help.github.com/articles/dealing-with-line-endings/
 2015-09-07 15:40:02 +02:00
Marco Grella 17aafb9daa Align to current master 2015-09-04 17:01:04 +02:00
Atis Elsts 2f79810b58 Use ENERGEST_SWITCH to switch between different power modes to improve energest accuracy. 2015-09-04 11:46:00 +02:00
Marco Grella a627a54224 Fixes to README.md instructions 2015-09-03 18:02:15 +02:00
Simon Duquennoy 265b65c67c Fix Wismote randon_init for link-layer addresses shorter than 8 bytes 2015-09-01 19:57:37 +02:00
Marco Grella 913ef068be Updated submodule stm32cube-lib 2015-09-01 15:34:34 +02:00
Simon Duquennoy 4904386f41 Wismote: init random seed 2015-09-01 10:51:25 +02:00
Simon Duquennoy db1635cf3c Z1: configure SFD timestamp with flag CC2420_CONF_TIMESTAMP, for consistency the Sky platform and with cc2420.c 2015-09-01 10:03:44 +02:00
Simon Duquennoy 34280338ac Z1: init random seed 2015-09-01 10:02:35 +02:00
Antonio Lignan 90eca482ea Remove unused RPL_CONF_MAX_DAG_ENTRIES 2015-08-29 20:22:18 +02:00
Nicolas Tsiftes 607303ecdd Merge pull request #1081 from pablocorbalan/light 
Remove old unused light drivers
 2015-08-28 14:13:00 +02:00
Adam Dunkels e859ad8e05 Need to increase the Cooja serial buffer size to accomodate the traffic 2015-08-27 10:28:54 +02:00
Adam Dunkels bfb29d2f11 Merge pull request #1116 from cetic/pr-uip-clear-buffer 
Add uip_clear_buf() macro and replace all instances of uip_len = 0
 2015-08-27 10:27:08 +02:00
Harald Pichler 500078ef9a update to contiki 3.0 2015-08-26 16:01:57 +02:00
Nicolas Tsiftes 5db8006d0b Merge pull request #1032 from sumanpanchal/wismote-external-flash-driver 
Wismote external flash driver
 2015-08-26 13:18:18 +02:00
sumanpanchal fd5b03b767 WISMOTE external flash driver support 2015-08-24 22:50:22 +05:30
Jonas Olsson 8cb7562684 Improve the SPI and external flash driver for the sensortag 
For the SPI
* We improve the return semantics of _read() and _write()
* We set speed based on the value returned from ti_lib_sys_ctrl_clock_get() instead of using a hard-coded value

External flash changes:
* Rename macros to match instruction names
* verify_part(): Return a different value when the device is powered down and when communication fails
* Change return value semantics of static functions
* Adjust checks of board_spi_ return values
* Wait for BUSY to clear before attempting to send PD
* Accept two possible flash parts: W25X40CL (4MBit) as well as the W25X20CL (2MBit)
 2015-08-23 20:41:13 +01:00
Jonas Olsson e96b15773a Document how to use the debugger devpack 2015-08-23 20:41:12 +01:00
Jonas Olsson f4576a635f Document CC26xx/CC13xx border router and slip-radio 2015-08-23 20:41:12 +01:00
Jonas Olsson 3d19b0036e Add support for SmarfRF06 + CC1310EM 
This commit updates the srf06-cc26xx platform by adding support for the CC1310EM.

We generalise the way this platform selects CPU/board so that we can easily add more combinations in the future. These changes have implication on how to build for different devices, so make sure to have a look at the updated README
 2015-08-23 19:54:43 +01:00
Oliver Schmidt 757809196e Some finishing touch on the CBM retro targets. 2015-08-08 15:41:24 +02:00
Pablo Corbalán b1c3e929c5 Remove old unused light drivers 2015-08-04 20:39:09 +01:00
Oliver Schmidt ca2552461e Adjusted retro target clock to "new" DNS resolver. 
The DNS resolver requires 1/4 sec clock resolution. The retro targets had a 1/2 sec clock resolution (optimized for the 1/2 sec TCP timer) resulting in DNS resolver timeouts being 0. Therefore the retro target clock resolution is now increased to 1/4 sec.
 2015-08-04 13:48:08 +02:00
Marco Grella 62c33260bd Modified structure to use a sub-module for platform APIs 2015-07-31 17:11:27 +02:00
Marco Grella 711dd02a9c Improve UART IRQ management. 2015-07-29 12:55:30 +02:00
Marco Grella bb08369b01 Regression tests fixes and Readme update. 2015-07-27 14:08:07 +02:00
Marco Grella b271a4a3c3 Updated README.md 2015-07-24 17:00:32 +02:00
Marco Grella ceff03ab2f Updated README.md 2015-07-24 16:57:34 +02:00
Marco Grella 1116bcca2a Updated README.md 2015-07-24 16:44:19 +02:00
Marco Grella 86f35536a4 Added new stm32nucleo-spirit1 platform 2015-07-24 16:30:10 +02:00
Oliver Schmidt a30e2e0045 Allow to configure Telnetd idle timeout. 
The default Telnetd idle timeout of 30 seconds seems somewhat short. Best to have it user-configurable (incl. the option to turn it off with an config value of 0).
 2015-07-06 12:25:20 +02:00
Oliver Schmidt 5d039d9848 Optimized retro webbrowser configs. 
The change c7b8bac006 optimized memory usage and thus allowed to adjust the retro webbrowser configs for improved web page compatibility.
 2015-07-05 16:56:25 +02:00
Oliver Schmidt 2827b2d800 Rearrange Apple II language card usage. 
The code of etimer.o has become to large to fit into $D000-$D400. So other object file have been chosen.
 2015-06-28 22:12:44 +02:00
Oliver Schmidt a70fbf1bbf Reconfigured Telnet server. 
In order to have the wget command make some sense the write command should be present too.
- On the Apple][ reduction of the MTU seems to gain just enough RAM to have the (rather heavy-weight) full-blown C library file I/O working.
- On the C128 there's way too little RAM so there's no wget command but only the file commands.
- On the CBMs a dummy lseek() was necessary to have the read command link.
 2015-06-21 21:07:41 +02:00
Oliver Schmidt 55e568e7cb Minor Win32 config adjustment. 2015-06-21 14:15:41 +02:00
Laurent Deru 1784338b2e Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it 2015-06-15 11:10:51 +02:00
Oliver Schmidt 74db518846 Set Win32 file i/o to binary mode. 
This is i.e. necessary to have the file based webserver-example successfully read 'contiki.gif'.
 2015-06-14 17:48:36 +02:00
Oliver Schmidt c9edb9006b Merge pull request #1112 from oliverschmidt/master 
Various improvements of the HTTP client and web browser.
 2015-06-14 16:12:24 +02:00
Benoît Thébaudeau e8a268cd15 cc2538: aes: Add support for 192- and 256-bit keys 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-06-02 21:41:56 +02:00
Benoît Thébaudeau 117dc4e5e3 cc2538: Add crypto drivers and examples for AES-CCM and SHA-256 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-06-02 21:41:06 +02:00
Benoît Thébaudeau aba0b8ab40 Merge pull request #1085 from alignan/pull/remote 
New Zolertia Re-Mote platform (CC2538 + CC1120)
 2015-05-30 00:11:57 +02:00
Antonio Lignan 330e450ba4 Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094). 
The port was done jointly by Zolertia and George Oikonomou (University of Bristol).
 2015-05-29 22:04:43 +02:00
Benoît Thébaudeau 8c952e8026 Merge pull request #1082 from g-oikonomou/cc2538/readme-cdc 
Update the CC2538DK README about a Win CDC driver
 2015-05-26 00:29:50 +02:00
George Oikonomou b86c26fff8 Update the CC2538DK README about a Win CDC driver 
* The current version of the README points to a wrong URL
  for the LUFA Virtual Serial driver.
* A driver is nowadays provided by TI with CC2538
  Foundation Firmware

Thus, this pull updates the LUFA driver URL and also provides a
link to CC2538 Foundation Firmware
 2015-05-25 22:06:25 +01:00
Nicolas Tsiftes a14c78e1ce Build the Wismote platform with ContikiMAC and CSMA enabled by default. 2015-05-25 17:04:39 +02:00
Nicolas Tsiftes 3d284f8ecd Use the new path to a header file. 2015-05-25 16:52:12 +02:00
Matthieu Baerts 78b6b50194 Z1: tmp102: simple: fixed wrong cast 
When using this code:

    (int8_t)tmp102_read_temp_x100() / 100

Only the first value is casted into a int8_t type.

tmp102_read_temp_x100() returns the temperature in Celcius * 100. Most of
the time this value will be lower than -2^7 and higher than 2^7 (+/- 1.27°C).

The cast is not needed but a comment about this implicit cast has been added.
 2015-05-22 18:15:26 +02:00
Harald Pichler 9b6bdd30b8 use all submodules 2015-05-21 21:31:18 +02:00
Antonio Lignan 2cee62eb33 Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware 
Update to latest CC26xxware and add it as a submodule
 2015-05-21 10:01:00 +02:00
Harald Pichler 6a0d407806 Merge branch 'contiki' into osd 2015-05-19 10:54:55 +02:00
Adam Dunkels 730bda2001 Merge pull request #883 from cmorty/pull/global-macros 
Move MAX, MIN and ABS to contiki-macros
 2015-05-18 21:33:00 +02:00
Ulf Knoblich a388a1bcd7 CC2538: added support for SSI1 2015-05-18 10:02:55 +02:00
Moritz 'Morty' Strübe 0dab6926b3 Move MAX, MIN and ABS to sys/cc.h 2015-05-18 08:53:17 +02:00
George Oikonomou 541688235c Update the CC26xx README in terms of CC26xxware 2015-05-17 15:01:02 +01:00
George Oikonomou b4067560ba Remove references to obsolete peripheral clock scaling functions 2015-05-17 15:01:01 +01:00
George Oikonomou 8b1f2ef33c Reset I2C with HAPI call instead of register access 2015-05-17 15:01:00 +01:00
George Oikonomou 7a5b670f76 Remove references to IOC_JTAG_DISABLE 2015-05-17 14:09:52 +01:00
George Oikonomou 32840db66b Update driverlib version macros 2015-05-17 14:09:51 +01:00
Benoît Thébaudeau e88b3908ad cc2538dk: README: Add URL of Sourcery G++ Lite 2008q3-66 
Document the URL of the older Sourcery G++ Lite 2008q3-66 arm-none-eabi
toolchain mentioned by README.md so that users can easily find it if
needed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-05-17 01:53:09 +02:00
Antonio Lignan 32afadea77 Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm 
CC26xx Ultra Low Power Operation
 2015-05-16 10:27:22 +02:00
Harald Pichler 877bf27f5a Merge branch 'contiki' into osd 2015-05-15 20:48:26 +02:00
Antonio Lignan 402eabecca Merge pull request #929 from lab11/delete-old-coap 
Delete old CoAP implementation
 2015-05-15 15:49:04 +02:00
George Oikonomou 7ae3cd49ba Make sure SSI0 is powered and clocked before accessing it 
* Fail all SSI0 operations if the module is not powered and clocked
* Make sure SERIAL is powered before trying to enable run mode clock
 2015-05-15 11:38:20 +01:00
George Oikonomou 019143226b Adjust main: 
* Re-order OSC, VIMS cache, I/O latch configuration instructions
* Don't automatically enable UART RX: Let the example decide this
 2015-05-15 09:21:04 +01:00
George Oikonomou 6e7d52b5df Improve MPU power-cycling logic: 
* Keep MPU_PWR low when the sensor is not in use
* Deselect the sensor when not in use, in order to restore the I2C ping state
* Explicitly control the MPU_INT pin
* Don't shutdown the sensor when it's shut down
* Remove explicit shutdown-related API extension. It is no longer required
 2015-05-15 09:21:04 +01:00
George Oikonomou dcf0d11050 Re-map tag UART-related IOID defines 2015-05-15 09:21:03 +01:00
George Oikonomou 2cc59c524a Configure pins for unused tag peripherals 2015-05-15 09:21:03 +01:00
George Oikonomou e893c914b6 Set SPI pins to a low leakage state 2015-05-15 09:21:03 +01:00
George Oikonomou 421fbfae25 Change the LPM locks API: 
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.

This allows us to maintain only one linked list of LPM modules and overall improves code clarity
 2015-05-15 09:21:02 +01:00
George Oikonomou 0e92b508b3 Don't clock GPT0 on device startup 2015-05-15 09:21:02 +01:00
George Oikonomou 6611acadc7 Don't fire-up SERIAL automatically 2015-05-15 09:21:02 +01:00
George Oikonomou 34be012661 Improve I2C power-cycling logic: 
We only power, clock and enable the peripepheral when / if we need it

* We no longer automatically turn on the SERIAL PD when the CM3 is running
* Make sure the I2C peripheral is accessible (powered and clocked) before any operation
* If the peripheral is not accessible, automatically power it up and run the clock
* Put SDA, SCL, SDA HP and SCL HP in a low-leakage state when shutting down
* Don't automatically fire up the I2C controller when we wake up
 2015-05-15 09:21:02 +01:00
George Oikonomou 0ad4b5f323 Add the ability to put the I2C in a known/default state 2015-05-15 09:21:01 +01:00
George Oikonomou d1a1c16bd0 Define pins for more sensortag peripherals 2015-05-15 09:21:01 +01:00
George Oikonomou 4378217462 Improve sensortag external flash power management: 
* Explicitly put in deep sleep on device startup
* Verify that the flash has actually dropped to deep sleep
* Update CLK pin to match the one used on the v1.2 sensortag

Obsoletes and Closes #988
 2015-05-15 09:21:01 +01:00
George Oikonomou cf99160706 Change lpm_shutdown() API call: 
So that the caller can specify pin pull and wakeup state
 2015-05-15 09:21:01 +01:00
George Oikonomou 5644e95fb6 Fix global interrupt manipulation 2015-05-15 09:21:00 +01:00
George Oikonomou 3f310e462f Tidy-up clock configuration 2015-05-15 09:20:59 +01:00
George Oikonomou 450550a7d1 Explicitly configure Srf pins for unused peripherals 2015-05-15 09:20:59 +01:00
George Oikonomou 7a189d010b Don't power on SERIAL in the Srf's board_init 2015-05-15 09:20:59 +01:00
George Oikonomou 00a6c31158 Improve OPT sensor driver and usage 
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
 2015-05-15 09:20:59 +01:00
George Oikonomou 3ab1b836c4 Configure button pins with hysterisis 2015-05-15 09:20:58 +01:00
George Oikonomou 7641aa89f2 Tidy-up macro semicol usage 2015-05-15 09:20:58 +01:00
George Oikonomou 0b6813513c Undefine CTS/RTS pins for the SmartRF 2015-05-15 09:20:58 +01:00
George Oikonomou 883c30b4ac Handle the configuration of the TMP_RDY pin 2015-05-15 09:20:58 +01:00
George Oikonomou cee6c190c5 Use the BMP in 'forced' mode and reduce startup delay 
In forced mode, the BMP will turn itself off after a reading
 2015-05-15 09:20:57 +01:00
Antonio Lignan b50ae639b3 Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor 
Replace STH21 with HDC1000 for the CC2650 SensorTag
 2015-05-15 10:12:08 +02:00
Brad Campbell 6eaada0c3f Delete old CoAP implementation 
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
 2015-05-14 17:20:46 -04:00
Benoît Thébaudeau c9324d133f Merge pull request #1060 from g-oikonomou/cc26xx/contrib/ihex 
Produce ihex files usable with TI's Flash Programmer
 2015-05-14 19:24:36 +02:00
Benoît Thébaudeau d64927397f Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors 
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
 2015-05-14 19:21:56 +02:00
Benoît Thébaudeau 71f22b1775 Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir 
Move cc2538 startup-gcc.c to the CPU dir
 2015-05-14 18:43:39 +02:00
George Oikonomou 69c4f19336 Produce ihex files usable with TI's Flash Programmer 2015-05-14 13:22:11 +01:00
George Oikonomou 6507112b33 Remove SHT21 sources 2015-05-14 13:20:40 +01:00
George Oikonomou d5f458509d Adjust the CC26xx README to reflect new sensors 2015-05-14 13:20:39 +01:00
George Oikonomou 1384030d6e Replace SHT21 with HDC1000 driver in the tag build 2015-05-14 13:20:39 +01:00
George Oikonomou 7e3b8d6fcc Add a driver for the HDC1000 sensor 2015-05-14 13:20:39 +01:00
George Oikonomou a32598f658 Merge pull request #1059 from g-oikonomou/cc26xx/contrib/xxware-instructions 
Update CC26xxware download instructions
 2015-05-13 12:21:48 +01:00
George Oikonomou 96e1647270 Move cc2538 startup-gcc.c to the CPU dir 2015-05-13 01:31:10 +01:00
George Oikonomou 4de471478a Link and build tmp, vdd and als sensors 2015-05-12 23:42:20 +01:00
George Oikonomou 12ac8e1fb5 Initialise ADC in main, not in sensor drivers 2015-05-12 23:42:20 +01:00
George Oikonomou 3717522680 Re-work the CC2538 driver to be a driver for the Srf06 ALS only 2015-05-12 23:42:19 +01:00
Nicolas Tsiftes 44af0fa66b Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket 
New HTTP socket, DNS64, IP64 Cooja tests
 2015-05-10 17:14:31 +02:00
George Oikonomou 351b16c43c Update CC26xxware download instructions 2015-05-10 14:53:05 +01:00
Adam Dunkels 64bae5b38d Include the ip64-addr module, to make http-socket compile 2015-05-10 10:51:12 +02:00
Adam Dunkels 4a85d49a09 Include a subplatform-conf.h, which may override configuration parameters set by the cooja/contiki-conf.h 2015-05-10 10:51:12 +02:00
Adam Dunkels 81391c11a7 Need to specify the target name, which allows us to have platforms that inherit from the cooja platform, like the cooja-ip64 platform 2015-05-10 10:51:12 +02:00
Adam Dunkels bab1c48912 New Cooja platform designed for runnig IP64 routers for automated testing 2015-05-10 10:51:11 +02:00
George Oikonomou 447be526ae Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br 
Enable slip-radio and rpl-border-router for CC26xx
 2015-05-09 22:51:06 +01:00
George Oikonomou 598fd770b8 Merge pull request #960 from g-oikonomou/travis-arm-aapcs-tests 
Test cc2538dk with the recommended toolchain
 2015-05-09 22:31:18 +01:00
George Oikonomou bd5e35c968 Merge pull request #1052 from simonduq/packetbuf-cleanup 
Packetbuf cleanup
 2015-05-09 22:30:21 +01:00
Simon Duquennoy bb76bb8beb Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled. 2015-05-06 16:34:26 +02:00
George Oikonomou d808978149 Improve platform README 2015-05-03 22:36:04 +01:00
George Oikonomou 0327eea109 Printf Driverlib version at startup 2015-05-03 22:36:04 +01:00
George Oikonomou 77874dc02b Remove unused configuration defines 2015-05-03 22:36:03 +01:00
George Oikonomou f83c4e7286 Improve code style 2015-05-03 22:36:03 +01:00
George Oikonomou 1d97e7e11e Improve Reed Relay macro and comments for clarity 2015-05-03 22:36:03 +01:00
George Oikonomou 8c55bc3f3d Remove obsolete/unused make variables 2015-05-03 22:36:03 +01:00
George Oikonomou a72d90e283 Control TCP MSS in the project's conf 2015-05-03 13:31:03 +01:00
George Oikonomou 364fc9cacf Define button_sensor in contiki-conf.h 2015-05-03 13:30:59 +01:00
Oliver Schmidt 05d98ffca3 Adjusted some Win32 config values. 2015-05-02 00:17:53 +02:00
Oliver Schmidt 9aee07c9ad Leverage the recently added exec() cmdline support in the cc65 C library for the Apple ][. 2015-04-26 21:45:33 +02:00
Oliver Schmidt a824722862 Merge remote-tracking branch 'upstream/master' 2015-04-26 14:35:40 +02:00
David Rabel 29e62c4e20 SERVO_OFFSET deleted, SERVO_MIN added 2015-04-03 15:55:00 +02:00
David Rabel 41163406c2 Use OCR3 instead of OCR1 for servo 2015-04-03 15:49:17 +02:00
David Rabel 235f368340 Bugfix: missing braces added in serco_set() 2015-04-03 15:47:15 +02:00
Nicolas Tsiftes 8f50d9709d Merge pull request #999 from adamdunkels/lebrush-rdnss-support-rebased 
RDNSS support, again
 2015-03-30 17:21:23 +02:00
George Oikonomou 7238a1628f Merge pull request #1004 from alignan/z1-reed-sensor 
Added Reed Sensor driver, example, and minor fix to the SHT25 sensor driver
 2015-03-30 15:05:05 +01:00
Antonio Lignan b9334a3b0e Added Reed Sensor driver and example 2015-03-30 10:30:09 +02:00
Gaëtan Harter d0232bb20d Remove unused UIP_CONF_ND6_ defines in platforms 
UIP_CONF_ND6_MAX_PREFIXE
  UIP_CONF_ND6_MAX_DEFROUTERS
 2015-03-24 13:09:29 +01:00
Gaëtan Harter 697d8c0d23 Remove siclowpan compressions define in platforms 
Several platforms defined compressions modes values:

    SICSLOWPAN_CONF_COMPRESSION_IPV6
    SICSLOWPAN_CONF_COMPRESSION_HC1
    SICSLOWPAN_CONF_COMPRESSION_HC01

instead of using the global SICSLOWPAN_COMPRESSION_LEVEL definitions
 2015-03-24 11:40:32 +01:00
Gaëtan Harter 60719b8239 Remove unused SICSLOWPAN_CONF_CONVENTIONAL_MAC 2015-03-24 11:18:25 +01:00
Harald Pichler 560117e8f3 Merge branch 'contiki' into osd 2015-03-23 13:07:28 +01:00
Harald Pichler 0097d192be move dht11 define to project.conf 2015-03-23 13:03:32 +01:00
Antonio Lignan 64fd000e5d Removed duplicated condition in sht25 configuration 2015-03-11 14:25:23 +01:00
Antonio Lignan 1af29a5beb Added SHT25 sensor 2015-03-10 15:33:58 +01:00
George Oikonomou cd219e206c Adjust the cc2538dk readme to reflect travis test changes 2015-03-02 08:41:53 +00:00
George Oikonomou 0ba7f8df52 Merge pull request #951 from hrzr/master 
Make the CC2538DK button sensor clearer to work with
 2015-02-28 15:14:53 +00:00
Jonas Olsson c9071b6952 Add CC26xx common platform files 2015-02-25 13:12:20 +01:00
Jonas Olsson b385933fa8 Add SensorTag CC2650 files 2015-02-25 13:11:09 +01:00
Jonas Olsson c7d85c3ea5 Add Srf06EB + CC26xx EM files 2015-02-25 13:10:26 +01:00
Oliver Schmidt da536cb07c Removed superfluous AppleCommander parameters. 2015-02-21 17:16:08 +01:00
Mikhail Gaivoronskii 3f2869824c Uncrustified platform/cc2538dk/dev/button-sensor.c 2015-02-20 21:53:33 +05:00
Harald Pichler d31ecbf486 Merge branch 'contiki' into osd 2015-02-18 10:04:47 +01:00
Nicolas Tsiftes e58aae1dcd Merge pull request #950 from patoman007/master 
Fix: Misconfigurations to compile for avr-zigbit platform
 2015-02-17 09:41:20 +01:00
George Oikonomou 6bd8bb05f6 Improve wording 2015-02-16 10:17:58 +01:00
George Oikonomou 72914369e8 Re-structure CC2538 doxygen module hierarchy 2015-02-16 10:17:58 +01:00
George Oikonomou 8751e55c94 Improve wording, fix warnigs in the SSI/SPI docs 2015-02-16 10:17:58 +01:00
George Oikonomou b6bd556805 Fix clock.h warnings caused by multiple, conflicting documentation blocks of clock functions 2015-02-15 21:48:30 +01:00
George Oikonomou fb22e15844 Fix warnings caused by incorrect param names / undocumented params 2015-02-15 20:11:08 +01:00
Nicolas Tsiftes 277dc8e174 Merge pull request #826 from alignan/fix_octal 
Remove leading zeros from node id
 2015-02-11 22:35:02 +01:00
Harald Pichler 6730ec16c8 Merge branch 'contiki' into osd 2015-02-10 15:13:21 +01:00
Thomas Weber f06bd06b79 corrected line - #if UIP_CONF_IPV6 - in contiki-rcb-main.c to - #if NETSTACK_CONF_WITH_IPV6 - 2015-02-02 22:08:35 +01:00
PAtO! 2c2b930648 Fix: Misconfigurations to compile for avr-zigbit platform 2015-01-29 14:31:47 -03:00
Ralf Schlatterbeck c8be130f2e Finally fix LED-Strip driver 
.. and adapt led-strip.c to changed polarity (again).
 2015-01-26 20:44:30 +01:00
Ralf Schlatterbeck a2357e648e Invert LED count, use fixed led driver 2015-01-25 19:04:04 +01:00
Ralf Schlatterbeck e946cd4c13 Add LED strip example 
.. not yet working
 2015-01-25 18:31:17 +01:00
Thomas Weber d575f1a6ce added missing modules in Makefile.avr-rcb, added netstack init functions (to start the at86rf230, modified macros to increase the buffersize) 2015-01-17 19:19:16 +01:00
Harald Pichler ff29ab2c94 bugfix define framer and llsec 2015-01-16 22:22:16 +01:00
Harald Pichler 000d37a7fc update modules remove llsec 2015-01-16 15:03:37 +01:00
Víctor Ariño ccc0d27da0 Integrates uip-nameserver API 
On the same commit the src have been uncrustified and some typo
fixes as well as includes missing.
 2015-01-09 09:44:06 +01:00
Harald Pichler fb473237ce bugfix modules 2014-12-29 11:02:51 +01:00
Harald Pichler 9efc5d41c1 Merge branch 'contiki' into osd 2014-12-29 08:20:00 +01:00
George Oikonomou 8fe5456588 Change default PAN ID for the CC2538DK platform to 0xABCD 2014-12-08 22:33:33 +00:00
George Oikonomou 73a133373a Change CC2530DK default PAN ID to 0xABCD and make it configurable by project-conf.h 2014-12-08 22:33:11 +00:00
Harald Pichler ed161d1905 NETSTACK_CONF_WITH_IPV6 2014-12-07 17:36:53 +01:00
Harald Pichler a02be51f08 Merge branch 'contiki' into osd 2014-12-07 15:24:00 +01:00
Simon Duquennoy c2ca3e9fdb Cleanup UIP_CONF_IPV6_RPL configuration 2014-12-02 12:38:55 +01:00
Simon Duquennoy 6891bcdd20 Remove unneeded module inclusion from avr and seedeye platforms 2014-12-01 21:06:01 +01:00
Simon Duquennoy 0d9815e08b WITH_UIP6 -> NETSTACK_CONF_WITH_IPV6 2014-12-01 21:04:54 +01:00
Simon Duquennoy a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy 229c53a2e6 Cooja platform: do not include the rime module by default 2014-12-01 20:13:10 +01:00
Simon Duquennoy e85f41ffa0 Get IPv6 to fit in micaz platform again 2014-12-01 20:13:09 +01:00
Simon Duquennoy 722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
Nicolas Tsiftes d820feadd6 Merge pull request #792 from wchyan/master 
atmega128rfa1: Fix the default build error
 2014-11-28 19:23:26 +01:00
Nicolas Tsiftes 69c76c9f2f Merge pull request #872 from Bocci83/master 
Seedeye platform: add the explicit list of modules
 2014-11-28 19:21:52 +01:00
Nicolas Tsiftes 9b90c378e8 Merge pull request #812 from kkrentz/packetbuf-holds-broadcast 
packetbuf_holds_broadcast()
 2014-11-28 19:15:19 +01:00
kkrentz 7b63217a32 ContikiMAC: Default to contikimac_framer when using Rime over ContikiMAC 2014-11-25 04:56:09 -08:00
Stefano a5550fa083 Seedeye platform: add the explicit list of modules 2014-11-21 14:36:23 +01:00
Antonio Lignan e8c49dd29e Remove leading zeros from node id 2014-11-20 14:48:28 +01:00
Harald Pichler a86f137cf5 add module llsec 2014-11-19 15:10:10 +01:00
Harald Pichler 5f18fc6955 set all colors to the same pin PE5 2014-11-19 13:54:35 +01:00
Harald Pichler 42d3b38c9c optriac sensors use Arduino API 2014-11-19 13:54:28 +01:00
Harald Pichler f7e987cbeb change port manipulation to ardino commands and lets change the pin at runtime possible 2014-11-19 13:54:22 +01:00
Ralf Schlatterbeck 1a1aaa883e Turn off JTAG in adc_init 2014-11-19 13:54:13 +01:00
Ralf Schlatterbeck 53cf5ab6cf Fix A0-A5 ADC constants, use in example sketch 2014-11-19 13:53:59 +01:00
Ralf Schlatterbeck fbe6ae6a60 Fix off-by-one error in digitalPinToTimer 2014-11-19 13:53:53 +01:00
Ralf Schlatterbeck abdf6f8c6b Refactor A/D conversion in adc.c 
Now the necessary settings are in adc.h. Refactored to allow repeated
ADC reads without reinitialization. Arduino allows setting
analogReference, this is now also implemented.
ADC is now initialized to sane values in apps/arduino/arduino-process.c
dev/arduino/arduino-compat.h now has all hardware independent settings
for arduino (some moved from platform/osd-merkur/dev/hw-arduino.h).
turnOffPWM re-implemented with hw_timer, removed from wiring_digital.c
ADC-specific arduino stuff moved to arduino-compat.h
Arduinos wiring_analog no longer necessary.
arduino-sketch example now reads analog inputs 1 and 5 using analogRead.
 2014-11-19 13:53:32 +01:00
Ralf Schlatterbeck c46d6afa39 Make Arduino timer stuff work on Contiki 
New discovery: Contiki also uses timer 0. With almost the same interface
as Arduino. So we now completely get rid of wiring.c (only the main
file, the other wiring_xxx stay) and implement Arduino timer, delay, etc
in terms of the corresponding Contiki routines. Verified that now delay
works as expected. The LED in examples/osd/arduino-sketch blinks!

Before this, the arduino_init routine in wiring.c destroyed the timer-0
initialization of contiki, making both, contiki timer implementation
*and* contiki timer implementation fail if the arduino_init routine was
called. Now both work.

Squashed with following bug-fix commit.
 2014-11-19 13:50:58 +01:00
Ralf Schlatterbeck b6be226e69 Add Arduino compatibility layer 
We can now directly compile arduino sketches (.pde) files.
Arduino compatible analogWrite works now.
But there is still a long way to go, serial I/O and timer stuff (delay,
millis etc) currently don't work (not tested but I don't expect this to
work).
It can be used in an arduino sketch or in a normal contiki program.
We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's
Arduino compatible. If you need different frequencies see native timer
usage in examples/osd/pwm-example
In a contiki program you have to call arduino_pwm_timer_init to
initialize the timer before pwm works. The arduino sketch wrapper
already does this.
For running a sketch, see examples/osd/arduino-sketch
 2014-11-19 13:48:05 +01:00
Harald Pichler 5077010fc0 add i2c driver from Ingo 2014-11-19 13:46:58 +01:00
Harald Pichler 16fa63ebac bugfix read analog 2014-11-19 13:46:14 +01:00
Harald Pichler 4461dca8f2 set 0xABCD default panid 2014-11-19 13:46:07 +01:00
Ralf Schlatterbeck 4ceffb090d Make HW timer for contiki rtimer configurable 
... and configure osd platform to use timer 5. With the new
configuration we can use timer 3 for generating hardware PWM.
 2014-11-19 13:44:55 +01:00
Harald Pichler 38dbf611e6 add Arduino pin definition and commands 2014-11-19 13:42:57 +01:00
Harald Pichler 7c0cd36a77 bugfix define panid 2014-11-19 13:42:47 +01:00
Ralf Schlatterbeck 56f6f87c94 Allow changing bootloader_get_mac address 
Current default in the Makefile is the *new* bootloader address.
But for backward compatibility we've modified the run*.sh files
to use the old address. The run*.sh also now explain how to change
the default.
 2014-11-19 13:42:35 +01:00
Harald Pichler 1efbe0736a change resources to simple and make climate2 default 2014-11-19 13:42:13 +01:00
Harald Pichler d90e0d622d get s/button ->show button status 0/1 2014-11-19 13:42:05 +01:00
Harald Pichler affe81cc6d bugfix includes and names 2014-11-19 13:40:29 +01:00
Harald Pichler a16849120f adapt new names and api 2014-11-19 13:40:09 +01:00
Harald Pichler 964164b157 remove t4 driver at the moment, config problem 2014-11-19 13:39:11 +01:00
Marcus Priesch 630bd8e9e4 Factored to support configurable amount of pwm's, fixes 2014-11-19 13:38:58 +01:00
Harald Pichler 11b13a7a7e remove link status and bugfix params.c 2014-11-19 13:37:41 +01:00
Harald Pichler 9906e9736c temp and hum sensors values xxxx -> xx.xx 2014-11-19 13:37:21 +01:00
Harald Pichler 1b04a24022 config panid over defines 2014-11-19 13:37:06 +01:00
Harald Pichler 8b323633cd define new tria pins, configurable type ligt or shutter or plug 2014-11-19 13:36:58 +01:00
Harald Pichler 2408af0b93 remove xmac config 2014-11-19 13:36:35 +01:00
Harald Pichler ab16ebd4ea bugfix nbr name xmac 2014-11-19 13:35:04 +01:00
Harald Pichler 171c1290c3 update boarder router to new rpl tables 2014-11-19 13:34:47 +01:00
Harald Pichler dd917c3260 bugfix server client demo 2014-11-19 13:34:37 +01:00
Harald Pichler e2edd006d4 initial upload 2014-11-19 13:34:27 +01:00
Harald Pichler 837f70770a cleanup plattform defines, disable energest, radiostatistics 2014-11-19 13:34:20 +01:00
Harald Pichler 34d64b4eb0 bugfix blockmode, 8 Hz dutycyle as standard 2014-11-19 13:34:07 +01:00
Harald Pichler 1093989aef bugfix CS cast to uint8_t 2014-11-19 13:33:59 +01:00
Harald Pichler 29c7297591 bugfix RH03 sensor 2014-11-19 13:33:50 +01:00
Harald Pichler 45ede69308 add dht22 and RHT03 support 2014-11-19 13:33:40 +01:00
Harald Pichler 8f85f7fb0a bugfix new dresden module 32khz 2014-11-19 13:33:31 +01:00
Harald Pichler cead1c7ce0 use batmon in battery_sensor 2014-11-19 13:32:41 +01:00
Harald Pichler ae732f4636 initial upload 2014-11-19 13:32:31 +01:00
Harald Pichler db823713eb bugfix packet loss 
Conflicts:
	platform/osd-merkur/contiki-main.c
 2014-11-19 13:31:33 +01:00
Harald Pichler 48fff35bd9 update for new contiki fetch 2014-11-19 13:22:20 +01:00
Harald Pichler e9c033688b bugfix 2014-11-19 13:21:52 +01:00
Harald Pichler 1fc136d379 add BOOTLOADER_GET_MAC 
Conflicts:
	platform/osd-merkur/params.h
 2014-11-19 13:19:44 +01:00
Harald Pichler b1e1ef1ffd periodic prints configurable 2014-11-19 13:14:20 +01:00
Harald Pichler 88ae1828f9 remove debug code 2014-11-19 13:12:43 +01:00
Harald Pichler 245d801862 add merkurboard coap client demo 2014-11-19 12:14:24 +01:00
Marcus Priesch 42c28e0bf7 timer4 servo pwm 2014-11-19 12:11:19 +01:00
Marcus Priesch 277f63d76a timer4 servo pwm 2014-11-19 12:10:09 +01:00
Harald Pichler 54114b0943 many bugfixes, add cputemp 2014-11-19 12:07:31 +01:00
Harald Pichler e645833a99 add light-actor 2014-11-19 12:06:54 +01:00
Harald Pichler 8c08364cad add servo example 2014-11-19 12:06:45 +01:00
Harald Pichler 81e6734626 add climate example 2014-11-19 12:04:53 +01:00
Harald Pichler 715cfa3a75 add platform osd-merkur 2014-11-19 12:04:38 +01:00
Nicolas Tsiftes 866bb99944 Merge pull request #860 from simonduq/frame802154-align 
frame802154_t: make sure dest_addr and src_addr are aligned
 2014-11-18 08:59:30 +01:00
kkrentz fb00a217f5 packetbuf: Use packetbuf_holds_broadcast() all-over 2014-11-13 09:58:08 -08:00
Enrico Joerns b0206e2f58 [doc] avr-raven: Fix placement of description for ravenserial group 
Note: The raven-lcd-interface and raven-ipso modules in atmega128rfa1
seem to be needles for this platform and might be there only because of
copy&paste from the raven platform. Should be removed in a later patch.
 2014-11-10 23:53:34 +01:00
Enrico Joerns 846fd567d4 [doc] avr-atmega128rfa1: add to parent platform group 2014-11-10 23:53:34 +01:00
Enrico Joerns d4cf5ef5a1 [doc] Added minimal doxygen anchor for each platform currently available in Contiki 
Already existing label names and titles were retained
 2014-11-10 23:53:34 +01:00
Enrico Joerns 0288f867ce [platform/native] Add to doxygen tree 2014-11-10 23:53:32 +01:00
Enrico Joerns 9dd7f1d29a [doc] added faulty esb and msp430 references 2014-11-10 23:53:32 +01:00
Enrico Joerns 0b8769e576 [doc] Various fixes for doxygen grouping etc. 2014-11-10 23:53:32 +01:00
Simon Duquennoy 6b7017452b frame802154: move inclusion of linkaddr.h from .h to .c file 2014-11-10 15:43:32 +01:00
Fredrik Österlind 0a2804fd69 Merge pull request #846 from ejoerns/pull-req/cooja-platform 
Cooja platform fixes
 2014-11-05 15:21:18 +01:00
Enrico Joerns 0d12bcffcb [cooja-platform] Fixes for slip-bridge compatibility 
* Added dev/uart1.h header file to cooja platform
* Added slip arch stub
* Suppress examples putchar definition as cooja platform provides its own

Note that the uart1.h file should only be an intermediate solution.
A generic contiki-wide definition for uart handling is required as each
platform defines its own varying set of uart functions.
 2014-11-04 00:14:06 +01:00
Enrico Joerns 5a4c2e0d1f [cooja-platform] Add cast to linkaddr_t to avoid warning 2014-11-04 00:09:45 +01:00
Enrico Joerns f8445ba1bd [cooja-platform] Remove unused variable 'shortaddr' 
This variable was set but never used in the code
 2014-11-04 00:09:45 +01:00
Enrico Joerns 2bc1e08f19 [cooja-platform] Include eeprom.h to avoid implicit declaration warning 2014-11-04 00:09:45 +01:00
Antonio Lignan ef6c351d0c Add function to change I2C baudrate and push relevant configuration values to platform config 2014-10-20 14:23:36 +02:00
Nicolas Tsiftes 0d39ee96ad Merge pull request #820 from alignan/serialnum_as_nodeid 
Use the Z1 product ID as MAC/Node ID if no value is found in XMEM
 2014-10-20 11:38:11 +02:00
Nicolas Tsiftes 27cde1ff81 Merge pull request #824 from alignan/fix_warnings 
Warning fixes
 2014-10-20 11:16:36 +02:00
Antonio Lignan cceb97059c Use the Z1 product ID as MAC/Node ID if no value is found in the XMEM 2014-10-20 10:36:49 +02:00
Antonio Lignan c836fbfbd9 Fixes warnings, bad code and code style 2014-10-20 10:28:00 +02:00
Moritz 'Morty' Strübe c0783e2841 sky: Initialize energest as early as possible 
If energest is initialized too late, the radio is not accounted
until the first switch. This is a problem when the radio is always
listening.
 2014-10-09 09:42:56 +02:00
Mariano Alvira e803a654b4 Merge pull request #684 from SmallLars/2nd-button 
Enabled 2nd button on platform econotag
 2014-10-08 14:05:24 -05:00
Adam Dunkels d891d11324 Merge pull request #557 from kkrentz/llsec-integration 
Integration of Link Layer Security
 2014-10-08 15:45:46 +02:00
Antonio Lignan 5bbb0cabbc Added battery capability to Z1 platform 2014-10-08 11:53:09 +02:00
Antonio Lignan 343a3d3f7b Added missing radio capability define to Z1 platform config 2014-09-24 11:42:55 +02:00
Weichuan Yan 7b6439bd6f atmega128rfa1: Fix the default build error 
Fixing from http://sourceforge.net/p/contiki/mailman/message/32494852/

Signed-off-by: Weichuan Yan <yan.weichuan@gmail.com>
 2014-09-18 08:53:32 +08:00
Atis Elsts 0e9c051485 Fix time accounting on TI EXP5438 MSP430x5438a experimenters board 2014-08-21 18:10:53 +02:00
Nicolas Tsiftes 35b6032c64 Merge pull request #745 from PaulCorbalan/patch-1 
Add PLATFORM_HAS_RADIO in Sky Platform
 2014-08-18 15:08:37 +02:00
kkrentz 94d2b519e4 aducrf101mkxz: added llsec module 2014-08-05 09:15:40 -07:00
kkrentz 2cf7d98cad ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface 
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
 2014-08-05 05:07:06 -07:00
kkrentz c15a05aee1 Sky: Use the cc2420_aes_128_driver by default 2014-08-05 05:07:06 -07:00
kkrentz c6a98f2968 CC2420: Turned SPI macros to functions and removed redundant AES API 2014-08-05 05:07:06 -07:00
kkrentz c032b67969 llsec: Noncompromise-resilient 802.15.4 security 2014-08-05 05:07:05 -07:00
kkrentz 7943751b16 Sky: DEBUG on/off switch 2014-08-04 01:09:57 -07:00
kkrentz c7b394c51b Sky: Calling NETSTACK_LLSEC.bootstrap from contiki-sky-main.c 2014-08-04 01:09:57 -07:00
kkrentz c396a85364 llsec: Added a layer in between NETSTACK_MAC and NETSTACK_NETWORK for implementing link layer security 2014-08-04 01:09:57 -07:00
Jim Paris 9b76c2fb17 aducrf101: Adjust default buffer sizes to fit better in available RAM 2014-07-29 18:25:55 -04:00
Adam Dunkels 62b8aafb03 Merge pull request #722 from royscheefhals/contiki-fix 
char * data to void * data parameter in process_start
 2014-07-28 22:04:36 +02:00
Nicolas Tsiftes 582bfcb8c6 Merge pull request #696 from sieben/doc 
Correct several doxygen tags (\file,...)
 2014-07-28 11:42:41 +02:00
Rémy Léone 8c3fa17ec0 Correct several doxygen tags (\file) 2014-07-28 11:11:45 +02:00
George Oikonomou 95e2cd9021 Merge pull request #732 from camilorodegheri/patch-1 
Update README.md
 2014-07-27 22:55:00 +01:00
Jim Paris 6db05caed9 Fix radio hangups when trying to transmit with radio off. 
The border-router tries to transmit and do other stuff after turning
the radio off, and the radio driver didn't handle that very well.
With this fix, it's no longer necessary to reset the border router
after starting tunslip6.
 2014-07-23 16:21:53 -04:00
Jim Paris 6937b29670 Add Windows build instructions for ev-aducrf101mkxz platform 2014-07-23 16:21:53 -04:00
Jim Paris 07201d13a3 Add IAR compiler support for ADuCRF101 2014-07-23 16:21:53 -04:00
Jim Paris 4f1fc3557c Add README.md for ev-aducrf101mkxz platform 2014-07-23 16:21:53 -04:00
Jim Paris ad141b00fb Implement rtimers for ADuCRF101 2014-07-22 21:18:16 -04:00
Jim Paris c8716f4d57 Add platform LED driver 2014-07-22 21:18:16 -04:00
Jim Paris 63692ba96d Add button sensor support (BOOT button) 2014-07-22 21:18:16 -04:00
Jim Paris 4cb97a3311 Move RF RX into its own process 2014-07-22 21:18:16 -04:00
Jim Paris b7373edf8c Add ADuCRF101 radio driver 2014-07-22 21:18:16 -04:00
Jim Paris 5673b46e86 Add initial EV-ADuCRF101MKxZ platform support 2014-07-22 21:18:16 -04:00
Nicolas Tsiftes 784b20c04d Merge pull request #739 from alignan/merge_z1sp_with_z1 
Merges Z1SP into Z1 platform
 2014-07-04 22:03:27 +02:00
Oliver Schmidt 9ee1bae150 Only wait for a keypress if the user is told to press a key. 2014-07-04 19:33:35 +02:00
Antonio Lignan 5467674fcc Merges Z1SP into Z1 platform 2014-07-04 10:41:05 +02:00
Pablo Corbalán a490986401 Add PLATFORM_HAS_RADIO in Sky Platform 
In order to use the er-server-example Radio resource it is required that the platform defines that it has a radio. This line might be required in other platforms.
 2014-07-03 14:59:13 +01:00
Rémy Léone f111058472 Removing trailing whitespaces 2014-06-30 20:01:05 +02:00
Ian Martin 6ae6c4768e rl78: Change RIMEADDR_CONF_SIZE to LINKADDR_CONF_SIZE because the rimeaddr module has been renamed to linkaddr. 2014-06-28 22:07:57 -04:00
Camilo Rodegheri a50e933f4b Update README.md 
Adding new command for ftdi_sio which applies to Kernel>3.12 used by Ubuntu 14.04 LTS
 2014-06-21 15:04:48 -03:00
Antonio Lignan 3d64b80e40 Added flags to enable 20-bit support from msp430-gcc 4.7.x 2014-06-17 12:55:08 +02:00
Nicolas Tsiftes 4c5fa6ff5d Merge pull request #713 from adamdunkels/pr/drop-iris 
Remove the unmaintained iris platform
 2014-06-13 12:57:52 +02:00
Roy Scheefhals 1058ea986a Changed the parameter 'char * data' of process_start to the 
type process_data_t. This was an artifact when the choice was
made to use the void * type for the data parameter in processes.

Changed parameter 'void * data' of process_post_synch to
process_data_t for consistency.

Checked all the uses of process_start() in contiki and fixed casts
of the data parameter.
 2014-06-12 13:40:28 +02:00
Adam Dunkels 9ceb059c21 Merge pull request #611 from nfi/cc2x20-sfd-config 
Corrected CC2x20 sfd config and startup message.
 2014-06-11 23:17:05 +02:00
Adam Dunkels d7e4443ab2 Remove the unmaintained iris platform 2014-06-11 19:52:19 +02:00
Nicolas Tsiftes da8e9a3e8d Merge pull request #655 from atiselsts/stm32_patches 
Fix inconsistent usage of short/long integer type in mbxxx platform's configuration file.
 2014-06-07 23:21:59 +02:00
Nicolas Tsiftes 350c83c947 Merge pull request #656 from atiselsts/native_platform_patches 
Minor improvements for the native platform
 2014-06-07 23:06:36 +02:00
George Oikonomou ba9c2d40eb Merge pull request #682 from g-oikonomou/watchdog-cc2538 
Confine CC2538 WDT on/off conf inside the driver
 2014-06-03 22:05:08 +01:00
George Oikonomou 25cd0788a6 Merge pull request #683 from g-oikonomou/sensinode-modules 
Fix MODULES for the Sensinode platform
 2014-06-03 22:03:42 +01:00
Adam Dunkels 64f65b4e45 Merge pull request #617 from nfi/extended-radio-api 
Extended radio API with support for setting channel, pan id, addressing modes, etc
 2014-06-03 21:32:53 +02:00
Nicolas Tsiftes 3650950460 Merge pull request #678 from simonduq/sky-disable-ndp 
Disable IPv6 Neighbor Discovery Protocol by default on the sky platform
 2014-06-02 10:52:07 +02:00
Rémy Léone 25c8b0835d Closing doxygen groups 2014-05-30 11:01:20 +02:00
Lars Schmertmann 50481722a8 Enabled 2nd button on platform econotag 2014-05-23 11:50:12 +02:00
George Oikonomou 6e08841e5c Fix MODULES for the Sensinode platform 2014-05-18 15:30:54 +02:00
George Oikonomou 807ee624e4 Confine CC2538 WDT on/off conf inside the driver 
Instead of requiring all calls to `watchdog_start` to be
wrapped inside `#if WATCHDOG_CONF_ENABLE` guards, we control
things from within the WDT driver itself.

This commit also includes some minor documentation and
indentation cleanups
 2014-05-18 14:12:16 +02:00
George Oikonomou b864ec2b71 Merge pull request #661 from hexluthor/watchdog-enable 
CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer
 2014-05-18 14:11:49 +02:00
George Oikonomou eabc244bff Merge pull request #641 from hexluthor/backdoor-conf 
CC2538: Add CONF parameters to select boot loader backdoor pin and logic level
 2014-05-18 13:29:02 +02:00
George Oikonomou 026864d129 Merge pull request #665 from hexluthor/cc2538-flash-conf 
CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters.
 2014-05-18 13:12:49 +02:00
Simon Duquennoy 6e53ab6eb0 Disable IPv6 Neighbor Discovery Protocol by default on the sky platform 2014-05-14 17:29:18 +02:00
Claes Jakobsson 9c08f28956 Added EEPROM support for Cooja with a rudimentary hexdump -C like viewer in the mote interface view 2014-05-08 22:35:58 +02:00
Ian Martin 2abaeaa8cc CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters. 2014-05-02 11:35:58 -04:00
Ian Martin 7081440eff CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer. 2014-05-02 10:28:30 -04:00
George Oikonomou 08c884afa0 Improve the CC2538 extended RF API implementation 
* Decouple 64-bit address from LINKADDR_SIZE
* get and set object from/to the start/end of the src/dest buffer
* We expect size == 8 (rather than size < 8) for both get_ and set_object. Error otherwise
* The RF no longer sets parameters by itself. We let the platform do this, using the extended API.
 2014-04-23 12:20:16 +01:00
George Oikonomou 3183805ba4 Implement extended RF API for the CC2530 RF 2014-04-23 12:16:50 +01:00
Atis Elsts 7dcfe77fba Fix inconsistent usage of short/long integer type in mbxxx platform's configuration file. 
The type used to store rtimer ticks on this platform is 32-bit integer, but the macro uses 16-bit comparison.
As a result, the output of the RTIMER_CLOCK_LT(a,b) macro was incorrect when used for comparisons between time values with sufficiently large difference.
The code to repeat this problem on mbxxx platform:

  rtimer_clock_t a = 6 * RTIMER_ARCH_SECOND;
  rtimer_clock_t b = 0;
  printf("%d\n", RTIMER_CLOCK_LT(a,b)); // expected output: "0", actual: "1"
 2014-04-22 14:52:50 +02:00
Atis Elsts 9cbfede2b6 Explicitly initialize queue buffer in the main startup routine only if uIP is used. 
The Rime stack already does this on its own, and there is no need to do it twice.
 2014-04-22 14:40:04 +02:00
Atis Elsts b9e15a5986 Make native platform's main loop less noisy. 2014-04-22 14:38:08 +02:00
Atis Elsts 6ea744421b Initialize the rtimer component on native platform's startup. 
Otherwise applications that use rtimers die when run as native code because of an unhandled signal.
 2014-04-22 14:35:01 +02:00
Ian Martin ee05810904 Changes suggested by @bthebaudeau. 2014-04-18 10:29:47 -04:00
George Oikonomou 49bf7cc241 Merge pull request #616 from hexluthor/listing 
CC2538: Add a Makefile rule to generate a final assembly listing.
 2014-04-17 22:13:52 +01:00
Benoît Thébaudeau d93d129da6 cc2538: uart: Make it possible to use several UARTs simultaneously 
This avoids the limitation of having a single UART available at runtime, without
duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2014-04-17 18:53:44 +02:00
Ian Martin 2cf730a1c6 Un-indent preprocessor directives. 2014-04-17 10:39:00 -04:00
Ian Martin 23a3a7f004 Add a note about "make cc2538-demo.lst" to the platform README. 2014-04-16 10:47:01 -04:00
Ian Martin 16936d864c Rename FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PIN to FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN. 2014-04-16 10:19:37 -04:00
Ian Martin 1a63c47cf9 CC2538: Add CONF parameters to select boot loader backdoor pin and logic level. 2014-04-15 17:36:55 -04:00
Brad Campbell af27d2d252 [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS 
Because the CC2538 has a multi-byte SPI RX FIFO, flushing the buffer
requires more than just a single read. This adds a loop that empties the
entire RX buffer on a FLUSH().

Different SPI chips needs different SPI settings. This commit adds a
function that allows chip drivers to configure the SPI peripheral before
using it.

The frame pin the driver was using as a chip select does not work as
most devices expect it to. It toggles after every byte, and most chips
interpret that as end of message. To make drivers more reliable, each
chip driver should setup a GPIO and assert it as needed.
 2014-04-15 14:07:10 -04:00
George Oikonomou 33abe26ec8 Merge pull request #411 from ADVANSEE/cc2538-adc 
cc2538: Add adc driver and example
 2014-04-13 03:05:12 +01:00
George Oikonomou 22554e6d72 Merge pull request #596 from hexluthor/cc2538-uart-baudrate 
cc2538: Support any UART baudrate.
 2014-04-13 02:51:58 +01:00
Niclas Finne fc6814a104 Added stub for extended radio API for seedeye 2014-04-03 13:38:31 +02:00
Niclas Finne b8a23564a3 Added stub for extended radio API for Cooja 2014-04-03 13:38:29 +02:00
Niclas Finne b13b5fc9ac Fixed typo to correctly print the radio channel at startup 2014-03-28 11:54:12 +01:00
Ian Martin 336224633a Eliminate UART_CONF_IBRD and UART_CONF_FBRD. 2014-03-22 10:26:03 -04:00
François Revol 726bdd699a native: Add CTK to the module list 
It is needed for apps compiled WITH_GUI.
 2014-03-21 23:01:02 +01:00
Nicolas Tsiftes b78eb96a54 Merge pull request #590 from g-oikonomou/native-rpl-module 
Include the RPL module for the native platform
 2014-03-18 12:32:56 +01:00
Oliver Schmidt d1d6278f42 Added info on W5100 driver. 2014-03-15 16:56:08 +01:00
George Oikonomou 4704eeb919 Include the RPL module for the native platform 2014-03-09 03:29:43 +00:00
George Oikonomou 6dc9dfa6c2 Merge pull request #551 from JelmerT/feature-cc2538-bsl 
CC2538 serial boot loader python script
 2014-03-09 02:11:36 +00:00
Jelmer Tiete 34e48f4233 Added bootloader backdoor configuration for cc2538DK in contiki-conf.h and selector in startup-gcc.c. Updated Makefile.cc2538dk to support direct uploading. Also updated the platform readme to include the workflow with cc2538-bsl. 2014-03-07 15:44:08 +01:00
Brad Campbell d14f0d5eed CC2538: add secondary location to ieee address 
The CC2538 currently has two addressing options: a hardcoded address set
at compile time or the address stored in primary address section of the
info page. This commit adds the option to choose the secondary location
of the ieee address from the info page, or any memory address.

To use, define `IEEE_ADDR_CONF_USE_SECONDARY_LOCATION` in `project-conf.h`
or similar.

For example:

    #define IEEE_ADDR_CONF_USE_SECONDARY_LOCATION 1
 2014-03-06 10:31:30 -05:00
Oliver Schmidt a1cd642e6e Merge pull request #554 from oliverschmidt/master 
Fixed win32 broken by recent changes.
 2014-02-02 12:10:57 -08:00
Oliver Schmidt 71c671b6cf Fixed win32 broken by recent changes. 2014-02-02 20:19:47 +01:00
George Oikonomou a63376f8be Use -Os for CC2538 builds 
As discussed in #503, -Os was broken with one of the toolchains
recommended in the platform's README and for that reason we were
using -O2 by default.

This commit sets the default to -Os and updates the README to no
longer recommend the toolchain in question
 2014-01-31 20:02:43 +00:00
Adam Dunkels 45265249fc Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
Adam Dunkels 765e9acded Merge pull request #499 from adamdunkels/bold/modularize-everything 
A bold move: modularize everything
 2014-01-29 08:17:10 -08:00
Ian Martin f3cc607101 eval-adf7xxxmb4z: Use the nullrdc driver instead of sicslowmac. 2014-01-26 17:40:31 -05:00
Adam Dunkels 4f498e2eac Updated the include paths to point to the new places 2014-01-26 23:20:47 +01:00
Adam Dunkels 2ec176891f Added the necessary modules to make the eval-adf7xxxmb4z port compile 2014-01-26 23:20:47 +01:00
Adam Dunkels 824d2047da Add the explicit list of modules, since we cannot do auto-dependency management of them 2014-01-26 23:20:47 +01:00
Adam Dunkels fce84c178c Removed unused rime-udp code 2014-01-26 23:20:45 +01:00
Adam Dunkels 8eace27f9b Moved net/rime.h to net/rime/rime.h 2014-01-26 23:20:45 +01:00
Adam Dunkels 1be10f026a Handle the CONTIKI_NO_NET case so that the ravenusbstick example builds 2014-01-26 23:20:42 +01:00
Adam Dunkels 6594873753 Updated the path to uip-debug.h 2014-01-26 23:20:41 +01:00
Adam Dunkels 4c2bd9f120 A set of default modules for the cc253x platform 2014-01-26 23:20:41 +01:00
Adam Dunkels dee654cfe5 Put the cc253x custom makerules in its own customrules file 2014-01-26 23:20:41 +01:00
Adam Dunkels 7846eb2e2f Split the cc2430 custom rules into its own file 2014-01-26 23:20:40 +01:00
Adam Dunkels 36a5aadc9e Moved the 6502 custom rules into its own Makefile.customrules-6502 file 2014-01-26 23:20:40 +01:00
Fredrik Osterlind cf32063c0b introduced optional Makefile.customrules-$(TARGET), to contain custom platform make rules 2014-01-26 23:20:39 +01:00
Adam Dunkels 7a740b382f Moved the individual MODULE definitions from the top-level Makefile.include into the individual platforms' Makefiles 2014-01-26 23:20:36 +01:00
Adam Dunkels 0fe08205e1 Moved the rimeaddr.[ch] code from the core/net/rime module to the core/net module, as it is used not only by rime code 2014-01-26 23:20:36 +01:00
Adam Dunkels b02104e4c4 Add the sht11 device driver module to the z1 platform 2014-01-26 23:20:36 +01:00
Adam Dunkels aaf0f83120 Add cxmac module to the sky platform 2014-01-26 23:20:35 +01:00
Adam Dunkels 9851ff85dd Add a sensible set of modules for the sensinode platform 2014-01-26 23:20:35 +01:00
Adam Dunkels b40f1210e6 Don't use the sicslowmac code, use nullrdc instead 2014-01-26 23:20:34 +01:00
Adam Dunkels e556ecbc25 Don't use the sicslowmac code, use nullrdc instead 2014-01-26 23:20:34 +01:00
Adam Dunkels d7013524f9 Add a sensible set of modules for the micaz platform 2014-01-26 23:20:34 +01:00
Adam Dunkels ee5299fe6e Add a sensible set of modules for the exp5438 platform 2014-01-26 23:20:33 +01:00
Adam Dunkels 51efdd952a Define MODULES for the avr-raven and the avr-ravenusb platforms 2014-01-26 23:20:33 +01:00
Adam Dunkels 34d46fa533 Include driver modules 2014-01-26 23:20:32 +01:00
Adam Dunkels 25367fb08c Moved the ds2411 driver into a dev/ds2411 module 2014-01-26 23:20:31 +01:00
Adam Dunkels c9efe3c3c4 Moved the cc2520 driver into its own dev/cc2520 module 2014-01-26 23:20:31 +01:00
Adam Dunkels 4cfe6c4a5e Moved the sht11 driver to its own module 2014-01-26 23:20:30 +01:00
Adam Dunkels d91bab9104 Include a basic set of modules 2014-01-26 23:20:28 +01:00
Adam Dunkels 0b805e4763 Moved the cc2420 driver into a separate dev/cc2420 module 2014-01-26 23:20:27 +01:00
Adam Dunkels c80615913f Include the core/net and core/net/ip modules in the core/net/ipv4 module 2014-01-26 23:20:25 +01:00
Adam Dunkels 3a3e65a78d Use the MODULES mechanism for the native platform 2014-01-26 23:20:24 +01:00
Adam Dunkels 5f3fe7f7c7 Updated include paths for the moved files under net/ 2014-01-26 23:20:23 +01:00
Ian Martin ed4edab461 eval-adf7xxxmb4z: Corrections to the platform README, update URLs to point to the mainline Contiki. 2014-01-24 12:49:16 -05:00
Oliver Schmidt 0258c413cc Merge pull request #539 from oliverschmidt/master 
Added more flexibility to webbrowser -> wget forwarding.
 2014-01-24 08:08:08 -08:00
Oliver Schmidt 1f4613383f Added more flexibility to webbrowser -> wget forwarding. 
- Up to now the CTK program handler was necessary to start wget and forward the URL. Now alternatively the webbrowser uses the underlying OS to exec wget.

- Up to now windowed CTK was necessary to display the acknowledge dialog. Now alternatively the webbrowser displays the acknowledge text and buttons right in the webpage area.

- For now the targets 'win32' and 'c64' make use of the new capabilities.
 2014-01-24 16:09:30 +01:00
Oliver Schmidt 8baf2d7b42 Merge pull request #536 from oliverschmidt/master 
Copied 'contiki_arg[c|v]' from 'native' to the other desktop targets.
 2014-01-24 03:41:42 -08:00
Oliver Schmidt fc983e2e79 Copied 'contiki_arg[c|v]' from 'native' to the other desktop targets. 
- On the retro targets support for 'contiki_arg[c|v]' is optional as accesing arg[c|v] is rather expensive.
 2014-01-24 11:56:40 +01:00
Ian Martin a897426410 Increase the default baudrate to 38400 bps for RL78. 2014-01-22 18:42:18 -05:00
Oliver Schmidt 510678bed0 Added mouse support for the Atari. 2014-01-20 22:51:40 +01:00
Oliver Schmidt a24865de72 Add somewhat more support to use different mouse drivers. 
- The default mouse driver is now always named 'contiki.mou'.
- Alternative mouse drivers are present in the disk images.
- Users can select their mouse driver by renaming the files.
 2014-01-17 23:45:59 +01:00
Oliver Schmidt fb20cf5ee6 Added UIP_CONF_LLH_LEN. 2014-01-17 22:07:03 +01:00
Ian Martin 85b439e33a Add eval-adf7xxxmb4z platform makefile. 2014-01-10 15:03:38 -05:00
Ian Martin 174d4dd80c Adds support for ADF7023 sub-GHz radio from Analog Devices and RL78 series MCU from Renesas. 
This example platform for this port is the EVAL-ADF7XXXMB4Z w/ radio
daughter cards:

    http://www.analog.com/en/evaluation/eval-adf7023/eb.html

See the platform readme for usage and platform information:

    https://github.com/contiki-os/contiki/tree/master/platform/eval-adf7xxxmb4z/readme.md

All files provided by Analog Devices for this port are released under
the same license as Contiki and copyright Analog Devices Inc. per
agreement between Redwire Consulting, LLC and Analog Devices Inc. (SOW 08122013)
 2014-01-04 18:56:51 -05:00
Oliver Schmidt 63725eff36 Merge remote-tracking branch 'upstream/master' 2013-12-12 20:46:43 +01:00
Oliver Schmidt 3b2173e01f Have CBM DOS filetype of imported files match the one used by cc65. 
CFS_WRITE implies O_TRUNC which is implemented on CBM DOS by deleting an
exsisting file. Hoewever this succeeds only if the CBM DOS filetype matches.

We need a working O_TRUNC in order to be able to overwrite the contiki.cfg
configuration file.

Note: Now it has be clarified why overwriting the configuration file started to
fail the CBM PFS (platform file system) can be activated for the recently added
ethconfig program.
 2013-12-12 18:57:40 +01:00
Benoît Thébaudeau dbba311270 cc2538: Add adc driver and example 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-12-06 22:07:45 +01:00
George Oikonomou f2c552bb55 Merge pull request #478 from ADVANSEE/cc2538-startup-cleanup 
cc2538: Startup cleanup
 2013-12-05 11:07:19 -08:00
George Oikonomou 63298843b3 Merge pull request #491 from g-oikonomou/remove-lpp-from-readme 
Remove LPP discussion from the cc2538 README
 2013-12-05 11:07:03 -08:00
George Oikonomou 17b2150081 Merge pull request #463 from ADVANSEE/cc2538-ports-pins 
cc2538: Clean up and improve port and pin definitions
 2013-12-05 10:31:29 -08:00
George Oikonomou 6f22fd6642 Remove LPP discussion from the cc2538 README 2013-12-05 18:16:22 +00:00
Benoît Thébaudeau a2686e581e cc2538: Add header file for flash CCA page and use it 
Create a dedicated header file with all the definitions for the flash lock bit
page and customer configuration area. This avoids duplicating those definitions
in the startup-gcc.c files of all CC2538-based platforms, and this also allows
to easily manipulate the CCA from outside startup-gcc.c (e.g. for on-the-air
firmware update).

The definitions are now complete contrary to what was in startup-gcc.c:
 - Definitions have been added to select the bootloader backdoor pin and active
   level if enabled.
 - Definitions have been added to access the page and debug lock bits. The debug
   lock bit can be used to prevent someone from reading back a programmed
   firmware through JTAG if the firmware binary image has to be confidential,
   which should be combined with a disabled bootloader backdoor.
 - The application entry point is now tied to the beginning of the .text section
   instead of to the beginning of the flash. This allows projects using custom
   linker scripts to place the application entry point anywhere in the flash,
   which can be useful e.g. for on-the-air firmware update.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-12-05 18:45:51 +01:00
Benoît Thébaudeau 65806f53eb cc2538dk: startup-gcc: Do not redefine SYS_CTRL_EMUOVR 
SYS_CTRL_EMUOVR is already defined in sys-ctrl.h, so #include this header file
instead of redefining SYS_CTRL_EMUOVR in startup-gcc.c.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-12-05 18:41:49 +01:00
George Oikonomou acebfa2932 Merge pull request #466 from ADVANSEE/cc2538dk-slip-enable 
cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED
 2013-12-05 09:11:38 -08:00
Mariano Alvira 590b3f48a9 Merge pull request #477 from MariaLauraStefanizzi/eeprom 
i2c and eeprom drivers for mbxxx boards
 2013-12-02 09:20:14 -08:00
Mariano Alvira 86c593b7cd Merge pull request #481 from ismb-pert/fix-sleep 
Fix sleep
 2013-12-02 09:19:25 -08:00
Mariano Alvira 2ab24f4fc3 Merge pull request #387 from chrta/mb950_1_rev_B 
Added support for STM32w boards MB950 and MB951 revision B.
 2013-12-02 09:11:50 -08:00
Gianfranco Costamagna ae27278714 Readded clock.c file, deleted in pull request #266, fixing issue #440 2013-12-02 11:38:07 +01:00
Adam Dunkels 0fd503af42 Removed the experimental checkpointing code 2013-11-28 14:09:17 +01:00
Maria Laura Stefanizzi 10c7066035 mbxxx eeprom driver 
This patch adds the eeprom driver needed to access M24C64
eeprom which is on some mbxxx boards.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi 22f39ab4ff MEMS I2C integration. 
This patch allows the MEMS driver to use the i2c driver.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi a9c0768fd6 Integrate I2C driver into board initializzation 
This patch add I2C initializzation for board with I2C devices.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi c7b1248aac mbxxx I2C driver. 
This patch add the I2C driver for mbxxx platform to communicate with
devices connected to the SC2 I2C bus.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Adam Dunkels 0d04db2b03 Merge pull request #428 from g-oikonomou/config-sanity 
Remove unnecessary stuff from various Makefiles (Config Sanity, Pt 1)
 2013-11-26 15:05:08 -08:00
Benoît Thébaudeau 436b585d7e cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED 
As the comment in contiki-conf.h says, the automatic definition of
SLIP_ARCH_CONF_ENABLED works only if UIP_FALLBACK_INTERFACE is tied to SLIP. If
UIP_FALLBACK_INTERFACE is set to another interface, SLIP_ARCH_CONF_ENABLED is
still automatically set to 1, leading to unwanted SLIP_END characters from
dbg.c:putchar() being printed on the UART.

This change makes it possible to force the definition of SLIP_ARCH_CONF_ENABLED
(e.g. from project-conf.h), so that it can be disabled if UIP_FALLBACK_INTERFACE
is used with something else than SLIP.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-11-25 20:48:52 +01:00
Benoît Thébaudeau d2f3795a30 cc2538: Clean up port and pin definitions 
Homogenize port and pin definitions naming:
 - PERIPHERAL_FUNCTION_PORT for the port ID,
 - PERIPHERAL_FUNCTION_PIN for the pin ID,
 - PERIPHERAL_FUNCTION_PORT_BASE for the port base,
 - PERIPHERAL_FUNCTION_PIN_MASK for the pin mask.

Define only PERIPHERAL_FUNCTION_PORT and PERIPHERAL_FUNCTION_PIN in board.h, and
deduce PERIPHERAL_FUNCTION_PORT_BASE and PERIPHERAL_FUNCTION_PIN_MASK in the
driver from the former definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-11-25 15:00:41 +01:00
Adam Dunkels bb2dcaa057 A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix 2013-11-24 20:20:11 +01:00
Adam Dunkels 19b32c54c0 Removed the old unused hc.[ch] code 2013-11-24 11:02:35 +01:00
Adam Dunkels cb8fc35e25 Removed the redbee platforms 2013-11-22 16:33:06 +01:00
Adam Dunkels eb99534c43 Removed the stk500/stk501 platforms 2013-11-22 16:33:06 +01:00
Adam Dunkels d68ce09fd5 Removed the stepper-robot platform 2013-11-22 16:33:06 +01:00