deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Document CC26xx/CC13xx border router and slip-radio

Browse source
This commit is contained in:
Jonas Olsson 2015-08-16 17:03:25 +01:00
parent bad7eb2bc8
commit f4576a635f
1 changed files with 38 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

38
platform/srf06-cc26xx/README.md
View file

@ -56,6 +56,44 @@ can be used to configure the rest of the example.
More details about those two examples can be found in their respective READMEs.
CC13xx/CC26xx Border Router over UART
=====================================
The platform code can be used as a border router (SLIP over UART) by using the
example under `examples/ipv6/rpl-border-router`. This example defines the
following:
#ifndef UIP_CONF_BUFFER_SIZE
#define UIP_CONF_BUFFER_SIZE 140
#endif
#ifndef UIP_CONF_RECEIVE_WINDOW
#define UIP_CONF_RECEIVE_WINDOW 60
#endif
The CC26xx port has much higher capability than some other platforms used as
border routers. Thus, before building the example, it is recommended to delete
these two configuration directives. This will allow platform defaults to take
effect and this will improve performance and stability.
Do not forget to set the correct channel by defining `RF_CORE_CONF_CHANNEL` as
required.
CC13xx/CC26xx slip-radio with 6lbr
==================================
The platform can also operate as a slip-radio over UART, to be used with
[6lbr](http://cetic.github.io/6lbr/).
Similar to the border router configuration, you will need to remove the defines
that limit the size of the uIP buffer. Removing the two lines below from
`examples/ipv6/slip-radio/project-conf.h` should do it.
#undef UIP_CONF_BUFFER_SIZE
#define UIP_CONF_BUFFER_SIZE 140
Do not forget to set the correct channel by defining `RF_CORE_CONF_CHANNEL` as
required.
Requirements
============
To use the port you need: