add Arduino pin definition and commands
This commit is contained in:
Harald Pichler
parent
7c0cd36a77
commit
38dbf611e6
95
examples/osd/arduino-merkurboard/Makefile
Normal file
95
examples/osd/arduino-merkurboard/Makefile
Normal file
|
|
@ -0,0 +1,95 @@
|
|||
all: er-example-server er-example-client
|
||||
# use this target explicitly if requried: er-plugtest-server
|
||||
|
||||
|
||||
# variable for this Makefile
|
||||
# configure CoAP implementation (3|7|12|13) (er-coap-07 also supports CoAP draft 08)
|
||||
WITH_COAP=13
|
||||
|
||||
# for some platforms
|
||||
UIP_CONF_IPV6=1
|
||||
# IPv6 make config disappeared completely
|
||||
CFLAGS += -DUIP_CONF_IPV6=1
|
||||
|
||||
CONTIKI=../../..
|
||||
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
|
||||
|
||||
|
||||
# variable for Makefile.include
|
||||
ifneq ($(TARGET), minimal-net)
|
||||
CFLAGS += -DUIP_CONF_IPV6_RPL=1
|
||||
else
|
||||
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
|
||||
${info INFO: compiling without RPL}
|
||||
CFLAGS += -DUIP_CONF_IPV6_RPL=0
|
||||
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
|
||||
${info INFO: compiling with large buffers}
|
||||
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
|
||||
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
|
||||
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
|
||||
endif
|
||||
|
||||
# linker optimizations
|
||||
SMALL=1
|
||||
|
||||
# REST framework, requires WITH_COAP
|
||||
ifeq ($(WITH_COAP), 13)
|
||||
${info INFO: compiling with CoAP-13}
|
||||
CFLAGS += -DWITH_COAP=13
|
||||
CFLAGS += -DREST=coap_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=0
|
||||
APPS += er-coap-13
|
||||
else ifeq ($(WITH_COAP), 12)
|
||||
${info INFO: compiling with CoAP-12}
|
||||
CFLAGS += -DWITH_COAP=12
|
||||
CFLAGS += -DREST=coap_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=0
|
||||
APPS += er-coap-12
|
||||
else ifeq ($(WITH_COAP), 7)
|
||||
${info INFO: compiling with CoAP-08}
|
||||
CFLAGS += -DWITH_COAP=7
|
||||
CFLAGS += -DREST=coap_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=0
|
||||
APPS += er-coap-07
|
||||
else ifeq ($(WITH_COAP), 3)
|
||||
${info INFO: compiling with CoAP-03}
|
||||
CFLAGS += -DWITH_COAP=3
|
||||
CFLAGS += -DREST=coap_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=0
|
||||
APPS += er-coap-03
|
||||
else
|
||||
${info INFO: compiling with HTTP}
|
||||
CFLAGS += -DWITH_HTTP
|
||||
CFLAGS += -DREST=http_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=1
|
||||
APPS += er-http-engine
|
||||
endif
|
||||
|
||||
APPS += erbium
|
||||
|
||||
# optional rules to get assembly
|
||||
#CUSTOM_RULE_C_TO_OBJECTDIR_O = 1
|
||||
#CUSTOM_RULE_S_TO_OBJECTDIR_O = 1
|
||||
|
||||
include $(CONTIKI)/Makefile.include
|
||||
|
||||
# optional rules to get assembly
|
||||
#$(OBJECTDIR)/%.o: asmdir/%.S
|
||||
# $(CC) $(CFLAGS) -MMD -c $< -o $@
|
||||
# @$(FINALIZE_DEPENDENCY)
|
||||
#
|
||||
#asmdir/%.S: %.c
|
||||
# $(CC) $(CFLAGS) -MMD -S $< -o $@
|
||||
|
||||
# border router rules
|
||||
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
|
||||
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
|
||||
|
||||
connect-router: $(CONTIKI)/tools/tunslip6
|
||||
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
|
||||
|
||||
connect-router-cooja: $(CONTIKI)/tools/tunslip6
|
||||
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
|
||||
|
||||
connect-minimal:
|
||||
sudo ip address add fdfd::1/64 dev tap0
|
||||
76
examples/osd/arduino-merkurboard/README
Normal file
76
examples/osd/arduino-merkurboard/README
Normal file
|
|
@ -0,0 +1,76 @@
|
|||
A Quick Introduction to the Erbium (Er) REST Engine
|
||||
===================================================
|
||||
Compile the Example
|
||||
-------------------
|
||||
./run.sh
|
||||
|
||||
OSD-Merkur Board
|
||||
----------------------
|
||||
write the images to the OSD-Merkur Board:
|
||||
|
||||
./flash.sh
|
||||
|
||||
EXAMPLE FILES
|
||||
-------------
|
||||
er-example-server.c: A RESTful server example showing how to use the REST layer to develop server-side applications (at the moment only CoAP is implemented for the REST Engine).
|
||||
er-example-client.c: A CoAP client that polls the /actuators/toggle resource every 10 seconds and cycles through 4 resources on button press (target address is hard-coded).
|
||||
er-plugtest-server.c: The server used for draft compliance testing at ETSI IoT CoAP Plugtest in Paris, France, March 2012 (configured for minimal-net).
|
||||
|
||||
PRELIMINARIES
|
||||
-------------
|
||||
- Make sure rpl-border-router has the same stack and fits into mote memory:
|
||||
You can disable RDC in border-router project-conf.h (not really required as BR keeps radio turned on).
|
||||
#undef NETSTACK_CONF_RDC
|
||||
#define NETSTACK_CONF_RDC nullrdc_driver
|
||||
- For convenience, define the Cooja addresses in /etc/hosts
|
||||
aaaa::0212:7401:0001:0101 cooja1
|
||||
aaaa::0212:7402:0002:0202 cooja2
|
||||
...
|
||||
- Get the Copper (Cu) CoAP user-agent from https://addons.mozilla.org/en-US/firefox/addon/copper-270430/
|
||||
- Optional: Save your target as default target
|
||||
$ make TARGET=sky savetarget
|
||||
|
||||
COOJA HOWTO
|
||||
-----------
|
||||
Server only:
|
||||
1) $ make TARGET=cooja server-only.csc
|
||||
2) Open new terminal
|
||||
3) $ make connect-router-cooja
|
||||
4) Start Copper and discover resources at coap://cooja2:5683/
|
||||
- Choose "Click button on Sky 2" from the context menu of mote 2 (server) after requesting /test/separate
|
||||
- Do the same when observing /test/event
|
||||
|
||||
With client:
|
||||
1) $ make TARGET=cooja server-client.csc
|
||||
2) Open new terminal
|
||||
3) $ make connect-router-cooja
|
||||
4) Wait until red LED toggles on mote 2 (server)
|
||||
5) Choose "Click button on Sky 3" from the context menu of mote 3 (client) and watch serial output
|
||||
|
||||
DETAILS
|
||||
-------
|
||||
Erbium currently implements draft 08 (name "er-coap-07" stems from last technical draft changes).
|
||||
Central features are commented in er-example-server.c.
|
||||
In general, apps/er-coap-07 supports:
|
||||
* All draft 08 header options
|
||||
* CON Retransmissions (note COAP_MAX_OPEN_TRANSACTIONS)
|
||||
* Blockwise Transfers (note REST_MAX_CHUNK_SIZE, see er-plugtest-server.c for Block1 uploads)
|
||||
* Separate Responses (no rest_set_pre_handler() required anymore, note coap_separate_accept(), _reject(), and _resume())
|
||||
* Resource Discovery
|
||||
* Observing Resources (see EVENT_ and PRERIODIC_RESOURCE, note COAP_MAX_OBSERVERS)
|
||||
|
||||
REST IMPLEMENTATIONS
|
||||
--------------------
|
||||
The Makefile uses WITH_COAP to configure different implementations for the Erbium (Er) REST Engine.
|
||||
* WITH_COAP=7 uses Erbium CoAP 08 apps/er-coap-07/.
|
||||
The default port for coap-07/-08 is 5683.
|
||||
* WITH_COAP=3 uses Erbium CoAP 03 apps/er-coap-03/.
|
||||
The default port for coap-03 is 61616.
|
||||
er-coap-03 produces some warnings, as it not fully maintained anymore.
|
||||
* WITH_COAP=0 is a stub to link an Erbium HTTP engine that uses the same resource abstraction (REST.x() functions and RESOURCE macros.
|
||||
|
||||
TODOs
|
||||
-----
|
||||
* Observe client
|
||||
* Multiple If-Match ETags
|
||||
* (Message deduplication)
|
||||
166
examples/osd/arduino-merkurboard/README.md
Normal file
166
examples/osd/arduino-merkurboard/README.md
Normal file
|
|
@ -0,0 +1,166 @@
|
|||
A Quick Introduction to the Erbium (Er) REST Engine
|
||||
===================================================
|
||||
|
||||
EXAMPLE FILES
|
||||
-------------
|
||||
|
||||
- er-example-server.c: A RESTful server example showing how to use the REST
|
||||
layer to develop server-side applications (at the moment only CoAP is
|
||||
implemented for the REST Engine).
|
||||
- er-example-client.c: A CoAP client that polls the /actuators/toggle resource
|
||||
every 10 seconds and cycles through 4 resources on button press (target
|
||||
address is hard-coded).
|
||||
- er-plugtest-server.c: The server used for draft compliance testing at ETSI
|
||||
IoT CoAP Plugtests. Erbium (Er) participated in Paris, France, March 2012 and
|
||||
Sophia-Antipolis, France, November 2012 (configured for minimal-net).
|
||||
|
||||
PRELIMINARIES
|
||||
-------------
|
||||
|
||||
- Make sure rpl-border-router has the same stack and fits into mote memory:
|
||||
You can disable RDC in border-router project-conf.h (not really required as BR keeps radio turned on).
|
||||
#undef NETSTACK_CONF_RDC
|
||||
#define NETSTACK_CONF_RDC nullrdc_driver
|
||||
- For convenience, define the Cooja addresses in /etc/hosts
|
||||
aaaa::0212:7401:0001:0101 cooja1
|
||||
aaaa::0212:7402:0002:0202 cooja2
|
||||
...
|
||||
- Get the Copper (Cu) CoAP user-agent from
|
||||
[https://addons.mozilla.org/en-US/firefox/addon/copper-270430](https://addons.mozilla.org/en-US/firefox/addon/copper-270430)
|
||||
- Optional: Save your target as default target
|
||||
make TARGET=sky savetarget
|
||||
|
||||
COOJA HOWTO
|
||||
-----------
|
||||
|
||||
###Server only:
|
||||
|
||||
make TARGET=cooja server-only.csc
|
||||
|
||||
Open new terminal
|
||||
|
||||
make connect-router-cooja
|
||||
|
||||
- Start Copper and discover resources at coap://cooja2:5683/
|
||||
- Choose "Click button on Sky 2" from the context menu of mote 2 (server) after
|
||||
requesting /test/separate
|
||||
- Do the same when observing /test/event
|
||||
|
||||
###With client:
|
||||
|
||||
make TARGET=cooja server-client.csc
|
||||
|
||||
Open new terminal
|
||||
|
||||
make connect-router-cooja
|
||||
|
||||
- Wait until red LED toggles on mote 2 (server)
|
||||
- Choose "Click button on Sky 3" from the context menu of mote 3 (client) and
|
||||
watch serial output
|
||||
|
||||
TMOTES HOWTO
|
||||
------------
|
||||
|
||||
###Server:
|
||||
|
||||
1. Connect two Tmote Skys (check with $ make TARGET=sky sky-motelist)
|
||||
|
||||
make TARGET=sky er-example-server.upload MOTE=2
|
||||
make TARGET=sky login MOTE=2
|
||||
|
||||
2. Press reset button, get address, abort with Ctrl+C:
|
||||
Line: "Tentative link-local IPv6 address fe80:0000:0000:0000:____:____:____:____"
|
||||
|
||||
cd ../ipv6/rpl-border-router/
|
||||
make TARGET=sky border-router.upload MOTE=1
|
||||
make connect-router
|
||||
|
||||
For a BR tty other than USB0:
|
||||
|
||||
make connect-router-port PORT=X
|
||||
|
||||
3. Start Copper and discover resources at:
|
||||
|
||||
coap://[aaaa::____:____:____:____]:5683/
|
||||
|
||||
### Add a client:
|
||||
|
||||
1. Change the hard-coded server address in er-example-client.c to aaaa::____:____:____:____
|
||||
2. Connect a third Tmote Sky
|
||||
|
||||
make TARGET=sky er-example-client.upload MOTE=3
|
||||
|
||||
MINIMAL-NET HOWTO
|
||||
-----------------
|
||||
|
||||
With the target minimal-net you can test your CoAP applications without
|
||||
constraints, i.e., with large buffers, debug output, memory protection, etc.
|
||||
The er-plugtest-server is thought for the minimal-net platform, as it requires
|
||||
an 1280-byte IP buffer and 1024-byte blocks.
|
||||
|
||||
make TARGET=minimal-net er-plugtest-server
|
||||
sudo ./er-plugtest-server.minimal-net
|
||||
|
||||
Open new terminal
|
||||
|
||||
make connect-minimal
|
||||
|
||||
- Start Copper and discover resources at coap://[fdfd::ff:fe00:10]:5683/
|
||||
- You can enable the ETSI Plugtest menu in Copper's preferences
|
||||
|
||||
Under Windows/Cygwin, WPCAP might need a patch in
|
||||
<cygwin>\usr\include\w32api\in6addr.h:
|
||||
|
||||
21,23c21
|
||||
< #ifdef __INSIDE_CYGWIN__
|
||||
< uint32_t __s6_addr32[4];
|
||||
< #endif
|
||||
---
|
||||
> u_int __s6_addr32[4];
|
||||
36d33
|
||||
< #ifdef __INSIDE_CYGWIN__
|
||||
39d35
|
||||
< #endif
|
||||
|
||||
DETAILS
|
||||
-------
|
||||
|
||||
Erbium currently implements draft 13. Central features are commented in
|
||||
er-example-server.c. In general, apps/er-coap-13 supports:
|
||||
|
||||
- All draft 13 header options
|
||||
- CON Retransmissions (note COAP_MAX_OPEN_TRANSACTIONS)
|
||||
- Blockwise Transfers (note REST_MAX_CHUNK_SIZE, see er-plugtest-server.c for
|
||||
Block1 uploads)
|
||||
- Separate Responses (no rest_set_pre_handler() required anymore, note
|
||||
coap_separate_accept(), _reject(), and _resume())
|
||||
- Resource Discovery
|
||||
- Observing Resources (see EVENT_ and PRERIODIC_RESOURCE, note
|
||||
COAP_MAX_OBSERVERS)
|
||||
|
||||
REST IMPLEMENTATIONS
|
||||
--------------------
|
||||
|
||||
The Makefile uses WITH_COAP to configure different implementations for the
|
||||
Erbium (Er) REST Engine.
|
||||
|
||||
- WITH_COAP=13 uses Erbium CoAP 13 apps/er-coap-13/. The default port for
|
||||
coap-13 is 5683.
|
||||
- WITH_COAP=12 uses Erbium CoAP 12 apps/er-coap-12/. The default port for
|
||||
coap-12 is 5683.
|
||||
- WITH_COAP=7 uses Erbium CoAP 08 apps/er-coap-07/. The default port for
|
||||
coap-07/-08 is 5683.
|
||||
- WITH_COAP=3 uses Erbium CoAP 03 apps/er-coap-03/. The default port for
|
||||
coap-03 is 61616. er-coap-03 produces some warnings, as it not fully
|
||||
maintained anymore.
|
||||
- WITH_COAP=0 is a stub to link an Erbium HTTP engine that uses the same
|
||||
resource abstraction (REST.x() functions and RESOURCE macros.
|
||||
|
||||
TODOs
|
||||
-----
|
||||
|
||||
- Dedicated Observe buffers
|
||||
- Optimize message struct variable access (directly access struct without copying)
|
||||
- Observe client
|
||||
- Multiple If-Match ETags
|
||||
- (Message deduplication)
|
||||
149
examples/osd/arduino-merkurboard/er-example-client.c
Normal file
149
examples/osd/arduino-merkurboard/er-example-client.c
Normal file
|
|
@ -0,0 +1,149 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Matthias Kovatsch
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* This file is part of the Contiki operating system.
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
* Erbium (Er) CoAP client example
|
||||
* \author
|
||||
* Matthias Kovatsch <kovatsch@inf.ethz.ch>
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
|
||||
#include "contiki.h"
|
||||
#include "contiki-net.h"
|
||||
|
||||
#include "dev/button-sensor.h"
|
||||
#include "dev/leds.h"
|
||||
|
||||
#if WITH_COAP == 3
|
||||
#include "er-coap-03-engine.h"
|
||||
#elif WITH_COAP == 6
|
||||
#include "er-coap-06-engine.h"
|
||||
#elif WITH_COAP == 7
|
||||
#include "er-coap-07-engine.h"
|
||||
#elif WITH_COAP == 12
|
||||
#include "er-coap-12-engine.h"
|
||||
#elif WITH_COAP == 13
|
||||
#include "er-coap-13-engine.h"
|
||||
#else
|
||||
#error "CoAP version defined by WITH_COAP not implemented"
|
||||
#endif
|
||||
|
||||
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#define PRINT6ADDR(addr) PRINTF("[%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x]", ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], ((uint8_t *)addr)[6], ((uint8_t *)addr)[7], ((uint8_t *)addr)[8], ((uint8_t *)addr)[9], ((uint8_t *)addr)[10], ((uint8_t *)addr)[11], ((uint8_t *)addr)[12], ((uint8_t *)addr)[13], ((uint8_t *)addr)[14], ((uint8_t *)addr)[15])
|
||||
#define PRINTLLADDR(lladdr) PRINTF("[%02x:%02x:%02x:%02x:%02x:%02x]",(lladdr)->addr[0], (lladdr)->addr[1], (lladdr)->addr[2], (lladdr)->addr[3],(lladdr)->addr[4], (lladdr)->addr[5])
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#define PRINT6ADDR(addr)
|
||||
#define PRINTLLADDR(addr)
|
||||
#endif
|
||||
|
||||
/* TODO: This server address is hard-coded for Cooja. */
|
||||
#define SERVER_NODE(ipaddr) uip_ip6addr(ipaddr, 0xfe80, 0, 0, 0, 0x0221, 0x2eff, 0xff00, 0x26e6) /* cooja2 */
|
||||
|
||||
#define LOCAL_PORT UIP_HTONS(COAP_DEFAULT_PORT+1)
|
||||
#define REMOTE_PORT UIP_HTONS(COAP_DEFAULT_PORT)
|
||||
|
||||
PROCESS(coap_client_example, "COAP Client Example");
|
||||
AUTOSTART_PROCESSES(&coap_client_example);
|
||||
|
||||
|
||||
uip_ipaddr_t server_ipaddr;
|
||||
|
||||
/* Example URIs that can be queried. */
|
||||
#define NUMBER_OF_URLS 4
|
||||
/* leading and ending slashes only for demo purposes, get cropped automatically when setting the Uri-Path */
|
||||
char* service_urls[NUMBER_OF_URLS] = {".well-known/core", "/actuators/toggle", "battery/", "error/in//path"};
|
||||
|
||||
/* This function is will be passed to COAP_BLOCKING_REQUEST() to handle responses. */
|
||||
void
|
||||
client_chunk_handler(void *response)
|
||||
{
|
||||
const uint8_t *chunk;
|
||||
|
||||
int len = coap_get_payload(response, &chunk);
|
||||
printf("|%.*s", len, (char *)chunk);
|
||||
}
|
||||
|
||||
|
||||
PROCESS_THREAD(coap_client_example, ev, data)
|
||||
{
|
||||
PROCESS_BEGIN();
|
||||
|
||||
leds_off(LEDS_RED);
|
||||
|
||||
static coap_packet_t request[1]; /* This way the packet can be treated as pointer as usual. */
|
||||
SERVER_NODE(&server_ipaddr);
|
||||
|
||||
/* receives all CoAP messages */
|
||||
coap_receiver_init();
|
||||
|
||||
#if PLATFORM_HAS_BUTTON
|
||||
SENSORS_ACTIVATE(button_sensor);
|
||||
PRINTF("Press a button to request %s\n", service_urls[1]);
|
||||
#endif
|
||||
|
||||
while(1) {
|
||||
PROCESS_YIELD();
|
||||
|
||||
#if PLATFORM_HAS_BUTTON
|
||||
if (ev == sensors_event && data == &button_sensor) {
|
||||
|
||||
/* send a request to notify the end of the process */
|
||||
|
||||
PRINTF("--Toggle --\n");
|
||||
leds_toggle(LEDS_RED);
|
||||
/* prepare request, TID is set by COAP_BLOCKING_REQUEST() */
|
||||
coap_init_message(request, COAP_TYPE_CON, COAP_POST, 0 );
|
||||
coap_set_header_uri_path(request, service_urls[1]);
|
||||
|
||||
const char msg[] = "Toggle!";
|
||||
coap_set_payload(request, (uint8_t *)msg, sizeof(msg)-1);
|
||||
|
||||
|
||||
PRINT6ADDR(&server_ipaddr);
|
||||
PRINTF(" : %u\n", UIP_HTONS(REMOTE_PORT));
|
||||
|
||||
COAP_BLOCKING_REQUEST(&server_ipaddr, REMOTE_PORT, request, client_chunk_handler);
|
||||
|
||||
PRINTF("\n--Done--\n");
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
543
examples/osd/arduino-merkurboard/er-example-server.c
Normal file
543
examples/osd/arduino-merkurboard/er-example-server.c
Normal file
|
|
@ -0,0 +1,543 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Matthias Kovatsch
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* This file is part of the Contiki operating system.
|
||||
*/
|
||||
|
||||
/*
|
||||
From:
|
||||
http://tools.ietf.org/id/draft-ietf-core-interfaces-01.txt
|
||||
|
||||
Appendix A. Profile example
|
||||
|
||||
The following is a short definition of simple profile. This
|
||||
simplistic profile is for use in the examples of this document.
|
||||
|
||||
+--------------------+-----------+------------+---------+
|
||||
| Function Set | Root Path | RT | IF |
|
||||
+--------------------+-----------+------------+---------+
|
||||
| Device Description | /d | simple.dev | core.ll |
|
||||
| Sensors | /s | simple.sen | core.b |
|
||||
| Actuators | /a | simple.act | core.b |
|
||||
+--------------------+-----------+------------+---------+
|
||||
|
||||
List of Function Sets
|
||||
|
||||
+-------+----------+----------------+---------+------------+
|
||||
| Type | Path | RT | IF | Data Type |
|
||||
+-------+----------+----------------+---------+------------+
|
||||
| Name | /d/name | simple.dev.n | core.p | xsd:string |
|
||||
| Model | /d/model | simple.dev.mdl | core.rp | xsd:string |
|
||||
+-------+----------+----------------+---------+------------+
|
||||
|
||||
Device Description Function Set
|
||||
|
||||
+-------------+-------------+----------------+--------+-------------+
|
||||
| Type | Path | RT | IF | Data Type |
|
||||
+-------------+-------------+----------------+--------+-------------+
|
||||
| Light | /s/light | simple.sen.lt | core.s | xsd:decimal |
|
||||
| | | | | (lux) |
|
||||
| Humidity | /s/humidity | simple.sen.hum | core.s | xsd:decimal |
|
||||
| | | | | (%RH) |
|
||||
| Temperature | /s/temp | simple.sen.tmp | core.s | xsd:decimal |
|
||||
| | | | | (degC) |
|
||||
+-------------+-------------+----------------+--------+-------------+
|
||||
|
||||
Sensors Function Set
|
||||
|
||||
+------+------------+----------------+--------+-------------+
|
||||
| Type | Path | RT | IF | Data Type |
|
||||
+------+------------+----------------+--------+-------------+
|
||||
| LED | /a/{#}/led | simple.act.led | core.a | xsd:boolean |
|
||||
+------+------------+----------------+--------+-------------+
|
||||
|
||||
Actuators Function Set
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
* Erbium (Er) REST Engine example (with CoAP-specific code)
|
||||
* \author
|
||||
* Matthias Kovatsch <kovatsch@inf.ethz.ch>
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include "contiki.h"
|
||||
#include "contiki-net.h"
|
||||
#include <avr/eeprom.h>
|
||||
|
||||
|
||||
/* Define which resources to include to meet memory constraints. */
|
||||
#define REST_RES_MODEL 1
|
||||
#define REST_RES_NAME 1
|
||||
#define REST_RES_SW 1
|
||||
#define REST_RES_EVENT 1
|
||||
#define REST_RES_LED 1
|
||||
#define REST_RES_TOGGLE 1
|
||||
#define REST_RES_BATTERY 1
|
||||
#define REST_RES_TEMPERATURE 1
|
||||
|
||||
#include "erbium.h"
|
||||
|
||||
#include "dev/Arduino.h"
|
||||
|
||||
#if defined (PLATFORM_HAS_BUTTON)
|
||||
#include "dev/button-sensor.h"
|
||||
#endif
|
||||
#if defined (PLATFORM_HAS_LED)
|
||||
#include "dev/leds.h"
|
||||
#endif
|
||||
#if defined (PLATFORM_HAS_BATTERY)
|
||||
#include "dev/battery-sensor.h"
|
||||
#endif
|
||||
#if defined (PLATFORM_HAS_TEMPERATURE)
|
||||
#include "dev/temperature-sensor.h"
|
||||
#endif
|
||||
|
||||
/* For CoAP-specific example: not required for normal RESTful Web service. */
|
||||
#if WITH_COAP == 3
|
||||
#include "er-coap-03.h"
|
||||
#elif WITH_COAP == 7
|
||||
#include "er-coap-07.h"
|
||||
#elif WITH_COAP == 12
|
||||
#include "er-coap-12.h"
|
||||
#elif WITH_COAP == 13
|
||||
#include "er-coap-13.h"
|
||||
#else
|
||||
#warning "Erbium example without CoAP-specifc functionality"
|
||||
#endif /* CoAP-specific example */
|
||||
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#define PRINT6ADDR(addr) PRINTF("[%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x]", ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], ((uint8_t *)addr)[6], ((uint8_t *)addr)[7], ((uint8_t *)addr)[8], ((uint8_t *)addr)[9], ((uint8_t *)addr)[10], ((uint8_t *)addr)[11], ((uint8_t *)addr)[12], ((uint8_t *)addr)[13], ((uint8_t *)addr)[14], ((uint8_t *)addr)[15])
|
||||
#define PRINTLLADDR(lladdr) PRINTF("[%02x:%02x:%02x:%02x:%02x:%02x]",(lladdr)->addr[0], (lladdr)->addr[1], (lladdr)->addr[2], (lladdr)->addr[3],(lladdr)->addr[4], (lladdr)->addr[5])
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#define PRINT6ADDR(addr)
|
||||
#define PRINTLLADDR(addr)
|
||||
#endif
|
||||
|
||||
|
||||
/******************************************************************************/
|
||||
#if REST_RES_MODEL
|
||||
/*
|
||||
* Resources are defined by the RESOURCE macro.
|
||||
* Signature: resource name, the RESTful methods it handles, and its URI path (omitting the leading slash).
|
||||
*/
|
||||
RESOURCE(model, METHOD_GET, "p/model", "title=\"model\";rt=\"simple.dev.mdl\"");
|
||||
|
||||
/*
|
||||
* A handler function named [resource name]_handler must be implemented for each RESOURCE.
|
||||
* A buffer for the response payload is provided through the buffer pointer. Simple resources can ignore
|
||||
* preferred_size and offset, but must respect the REST_MAX_CHUNK_SIZE limit for the buffer.
|
||||
* If a smaller block size is requested for CoAP, the REST framework automatically splits the data.
|
||||
*/
|
||||
void
|
||||
model_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
char message[100];
|
||||
int index = 0;
|
||||
int length = 0; /* |<-------->| */
|
||||
|
||||
/* Some data that has the length up to REST_MAX_CHUNK_SIZE. For more, see the chunk resource. */
|
||||
// jSON Format
|
||||
index += sprintf(message + index,"{\n \"model\" : \"Merkurboard\"\n");
|
||||
index += sprintf(message + index,"}\n");
|
||||
|
||||
length = strlen(message);
|
||||
memcpy(buffer, message,length );
|
||||
|
||||
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
|
||||
REST.set_response_payload(response, buffer, length);
|
||||
}
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
#if REST_RES_SW
|
||||
/*
|
||||
* Resources are defined by the RESOURCE macro.
|
||||
* Signature: resource name, the RESTful methods it handles, and its URI path (omitting the leading slash).
|
||||
*/
|
||||
RESOURCE(sw, METHOD_GET, "p/sw", "title=\"Software Version\";rt=\"simple.dev.sv\"");
|
||||
|
||||
/*
|
||||
* A handler function named [resource name]_handler must be implemented for each RESOURCE.
|
||||
* A buffer for the response payload is provided through the buffer pointer. Simple resources can ignore
|
||||
* preferred_size and offset, but must respect the REST_MAX_CHUNK_SIZE limit for the buffer.
|
||||
* If a smaller block size is requested for CoAP, the REST framework automatically splits the data.
|
||||
*/
|
||||
void
|
||||
sw_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
char message[100];
|
||||
int index = 0;
|
||||
int length = 0; /* |<-------->| */
|
||||
|
||||
/* Some data that has the length up to REST_MAX_CHUNK_SIZE. For more, see the chunk resource. */
|
||||
// jSON Format
|
||||
index += sprintf(message + index,"{\n \"sw\" : \"V0.8\"\n");
|
||||
index += sprintf(message + index,"}\n");
|
||||
|
||||
length = strlen(message);
|
||||
memcpy(buffer, message,length );
|
||||
|
||||
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
|
||||
REST.set_response_payload(response, buffer, length);
|
||||
}
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
#if REST_RES_NAME
|
||||
/*
|
||||
* Resources are defined by the RESOURCE macro.
|
||||
* Signature: resource name, the RESTful methods it handles, and its URI path (omitting the leading slash).
|
||||
*/
|
||||
RESOURCE(name, METHOD_POST | METHOD_GET, "p/name", "title=\"name\";rt=\"simple.dev.n\"");
|
||||
/* eeprom space */
|
||||
#define P_NAME "Testboard"
|
||||
#define P_NAME_MAX 17
|
||||
uint8_t eemem_p_name[P_NAME_MAX] EEMEM = P_NAME;
|
||||
|
||||
/*
|
||||
* A handler function named [resource name]_handler must be implemented for each RESOURCE.
|
||||
* A buffer for the response payload is provided through the buffer pointer. Simple resources can ignore
|
||||
* preferred_size and offset, but must respect the REST_MAX_CHUNK_SIZE limit for the buffer.
|
||||
* If a smaller block size is requested for CoAP, the REST framework automatically splits the data.
|
||||
*/
|
||||
void
|
||||
name_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
uint8_t eebuffer[32];
|
||||
char message[100];
|
||||
int index = 0;
|
||||
int length = 0; /* |<-------->| */
|
||||
const char *name = NULL;
|
||||
int success = 1;
|
||||
|
||||
switch(REST.get_method_type(request)){
|
||||
case METHOD_GET:
|
||||
cli();
|
||||
eeprom_read_block (eebuffer, &eemem_p_name, sizeof(eemem_p_name));
|
||||
sei();
|
||||
/* Some data that has the length up to REST_MAX_CHUNK_SIZE. For more, see the chunk resource. */
|
||||
// jSON Format
|
||||
index += sprintf(message + index,"{\n \"name\" : \"%s\"\n",eebuffer);
|
||||
index += sprintf(message + index,"}\n");
|
||||
|
||||
length = strlen(message);
|
||||
memcpy(buffer, message,length );
|
||||
|
||||
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
|
||||
REST.set_response_payload(response, buffer, length);
|
||||
break;
|
||||
|
||||
case METHOD_POST:
|
||||
if (success && (length=REST.get_post_variable(request, "name", &name))) {
|
||||
PRINTF("name %s\n", name);
|
||||
if (length < P_NAME_MAX) {
|
||||
memcpy(&eebuffer, name,length);
|
||||
eebuffer[length]=0;
|
||||
cli();
|
||||
eeprom_write_block(&eebuffer, &eemem_p_name, sizeof(eemem_p_name));
|
||||
sei();
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
success = 0;
|
||||
}
|
||||
if (!success) {
|
||||
REST.set_response_status(response, REST.status.BAD_REQUEST);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
#if REST_RES_EVENT && defined (PLATFORM_HAS_BUTTON)
|
||||
/*
|
||||
* Example for an event resource.
|
||||
* Additionally takes a period parameter that defines the interval to call [name]_periodic_handler().
|
||||
* A default post_handler takes care of subscriptions and manages a list of subscribers to notify.
|
||||
*/
|
||||
EVENT_RESOURCE(event, METHOD_GET, "s/button", "title=\"Event demo\";obs");
|
||||
|
||||
void
|
||||
event_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
char message[100];
|
||||
int index = 0;
|
||||
int length = 0; /* |<-------->| */
|
||||
int button = button_sensor.value(0);
|
||||
|
||||
index += sprintf(message + index,"%d",button);
|
||||
length = strlen(message);
|
||||
memcpy(buffer, message,length );
|
||||
|
||||
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
|
||||
REST.set_response_payload(response, buffer, length);
|
||||
|
||||
/* A post_handler that handles subscriptions/observing will be called for periodic resources by the framework. */
|
||||
}
|
||||
|
||||
/* Additionally, a handler function named [resource name]_event_handler must be implemented for each PERIODIC_RESOURCE defined.
|
||||
* It will be called by the REST manager process with the defined period. */
|
||||
void
|
||||
event_event_handler(resource_t *r)
|
||||
{
|
||||
static uint16_t event_counter = 0;
|
||||
static char content[12];
|
||||
|
||||
++event_counter;
|
||||
|
||||
PRINTF("TICK %u for /%s\n", event_counter, r->url);
|
||||
|
||||
/* Build notification. */
|
||||
coap_packet_t notification[1]; /* This way the packet can be treated as pointer as usual. */
|
||||
coap_init_message(notification, COAP_TYPE_CON, REST.status.OK, 0 );
|
||||
coap_set_payload(notification, content, snprintf(content, sizeof(content), "EVENT %u", event_counter));
|
||||
|
||||
/* Notify the registered observers with the given message type, observe option, and payload. */
|
||||
REST.notify_subscribers(r, event_counter, notification);
|
||||
}
|
||||
#endif /* PLATFORM_HAS_BUTTON */
|
||||
|
||||
|
||||
/******************************************************************************/
|
||||
#if defined (PLATFORM_HAS_LED)
|
||||
/******************************************************************************/
|
||||
#if REST_RES_LED
|
||||
/*A simple actuator example, depending on the color query parameter and post variable mode, corresponding led is activated or deactivated*/
|
||||
RESOURCE(led, METHOD_POST | METHOD_PUT , "a/led", "title=\"LED: POST/PUT mode=on|off\";rt=\"simple.act.led\"");
|
||||
|
||||
void
|
||||
led_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
size_t len = 0;
|
||||
const char *mode = NULL;
|
||||
uint8_t led = 0;
|
||||
int success = 1;
|
||||
|
||||
led = LEDS_RED;
|
||||
|
||||
if (success && (len=REST.get_post_variable(request, "mode", &mode))) {
|
||||
PRINTF("mode %s\n", mode);
|
||||
|
||||
if (strncmp(mode, "on", len)==0) {
|
||||
leds_on(led);
|
||||
} else if (strncmp(mode, "off", len)==0) {
|
||||
leds_off(led);
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (!success) {
|
||||
REST.set_response_status(response, REST.status.BAD_REQUEST);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
#if REST_RES_TOGGLE
|
||||
/* A simple actuator example. Toggles the red led */
|
||||
RESOURCE(toggle, METHOD_POST, "a/toggle", "title=\"Red LED\";rt=\"Control\"");
|
||||
void
|
||||
toggle_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
leds_toggle(LEDS_RED);
|
||||
}
|
||||
#endif
|
||||
#endif /* PLATFORM_HAS_LED */
|
||||
|
||||
/******************************************************************************/
|
||||
#if REST_RES_BATTERY && defined (PLATFORM_HAS_BATTERY)
|
||||
/* A simple getter example. Returns the reading from light sensor with a simple etag */
|
||||
RESOURCE(battery, METHOD_GET, "s/battery", "title=\"Battery status\";rt=\"Battery\"");
|
||||
void
|
||||
battery_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
int battery = battery_sensor.value(0);
|
||||
|
||||
const uint16_t *accept = NULL;
|
||||
int num = REST.get_header_accept(request, &accept);
|
||||
|
||||
if ((num==0) || (num && accept[0]==REST.type.TEXT_PLAIN))
|
||||
{
|
||||
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
|
||||
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d.%02d", battery/1000, battery % 1000);
|
||||
|
||||
REST.set_response_payload(response, (uint8_t *)buffer, strlen((char *)buffer));
|
||||
}
|
||||
else if (num && (accept[0]==REST.type.APPLICATION_JSON))
|
||||
{
|
||||
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
|
||||
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{\"battery\":%d.%02d}", battery/1000, battery % 1000);
|
||||
|
||||
REST.set_response_payload(response, buffer, strlen((char *)buffer));
|
||||
}
|
||||
else
|
||||
{
|
||||
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
|
||||
const char *msg = "Supporting content-types text/plain and application/json";
|
||||
REST.set_response_payload(response, msg, strlen(msg));
|
||||
}
|
||||
}
|
||||
#endif /* PLATFORM_HAS_BATTERY */
|
||||
|
||||
/******************************************************************************/
|
||||
#if REST_RES_TEMPERATURE && defined (PLATFORM_HAS_TEMPERATURE)
|
||||
/* A simple getter example. Returns the reading from light sensor with a simple etag */
|
||||
RESOURCE(temperature, METHOD_GET, "s/cputemp", "title=\"CPU Temperature\";rt=\"simple.sen.tmp\"");
|
||||
void
|
||||
temperature_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
int temperature = temperature_sensor.value(0);
|
||||
|
||||
const uint16_t *accept = NULL;
|
||||
int num = REST.get_header_accept(request, &accept);
|
||||
|
||||
if ((num==0) || (num && accept[0]==REST.type.TEXT_PLAIN))
|
||||
{
|
||||
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
|
||||
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d.%02d", temperature/100, temperature % 100);
|
||||
|
||||
REST.set_response_payload(response, (uint8_t *)buffer, strlen((char *)buffer));
|
||||
}
|
||||
else if (num && (accept[0]==REST.type.APPLICATION_JSON))
|
||||
{
|
||||
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
|
||||
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'temperature':%d.%02d}", temperature/100, temperature % 100);
|
||||
|
||||
REST.set_response_payload(response, buffer, strlen((char *)buffer));
|
||||
}
|
||||
else
|
||||
{
|
||||
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
|
||||
const char *msg = "Supporting content-types text/plain and application/json";
|
||||
REST.set_response_payload(response, msg, strlen(msg));
|
||||
}
|
||||
}
|
||||
#endif /* PLATFORM_HAS_TEMPERATURE */
|
||||
|
||||
void
|
||||
hw_init()
|
||||
{
|
||||
#if defined (PLATFORM_HAS_LED)
|
||||
// leds_off(LEDS_RED);
|
||||
// Pin 4 has an LED connected on the Merkurboard.
|
||||
// give it a name:
|
||||
int led = 4;
|
||||
|
||||
pinMode(led, OUTPUT);
|
||||
digitalWrite(led, HIGH);
|
||||
|
||||
#endif
|
||||
}
|
||||
|
||||
PROCESS(rest_server_example, "Erbium Example Server");
|
||||
AUTOSTART_PROCESSES(&rest_server_example);
|
||||
|
||||
PROCESS_THREAD(rest_server_example, ev, data)
|
||||
{
|
||||
PROCESS_BEGIN();
|
||||
|
||||
PRINTF("Starting Erbium Example Server\n");
|
||||
|
||||
#ifdef RF_CHANNEL
|
||||
PRINTF("RF channel: %u\n", RF_CHANNEL);
|
||||
#endif
|
||||
#ifdef IEEE802154_PANID
|
||||
PRINTF("PAN ID: 0x%04X\n", IEEE802154_PANID);
|
||||
#endif
|
||||
|
||||
PRINTF("uIP buffer: %u\n", UIP_BUFSIZE);
|
||||
PRINTF("LL header: %u\n", UIP_LLH_LEN);
|
||||
PRINTF("IP+UDP header: %u\n", UIP_IPUDPH_LEN);
|
||||
PRINTF("REST max chunk: %u\n", REST_MAX_CHUNK_SIZE);
|
||||
|
||||
/* Initialize the OSD Hardware. */
|
||||
hw_init();
|
||||
/* Initialize the REST engine. */
|
||||
rest_init_engine();
|
||||
|
||||
/* Activate the application-specific resources. */
|
||||
#if REST_RES_MODEL
|
||||
rest_activate_resource(&resource_model);
|
||||
#endif
|
||||
#if REST_RES_SW
|
||||
rest_activate_resource(&resource_sw);
|
||||
#endif
|
||||
#if REST_RES_NAME
|
||||
rest_activate_resource(&resource_name);
|
||||
#endif
|
||||
#if defined (PLATFORM_HAS_BUTTON) && REST_RES_EVENT
|
||||
rest_activate_event_resource(&resource_event);
|
||||
SENSORS_ACTIVATE(button_sensor);
|
||||
#endif
|
||||
#if defined (PLATFORM_HAS_LED)
|
||||
#if REST_RES_LED
|
||||
rest_activate_resource(&resource_led);
|
||||
#endif
|
||||
#if REST_RES_TOGGLE
|
||||
rest_activate_resource(&resource_toggle);
|
||||
#endif
|
||||
#endif /* PLATFORM_HAS_LED */
|
||||
#if defined (PLATFORM_HAS_BATTERY) && REST_RES_BATTERY
|
||||
SENSORS_ACTIVATE(battery_sensor);
|
||||
rest_activate_resource(&resource_battery);
|
||||
#endif
|
||||
#if defined (PLATFORM_HAS_TEMPERATURE) && REST_RES_TEMPERATURE
|
||||
SENSORS_ACTIVATE(temperature_sensor);
|
||||
rest_activate_resource(&resource_temperature);
|
||||
#endif
|
||||
|
||||
/* Define application-specific events here. */
|
||||
while(1) {
|
||||
PROCESS_WAIT_EVENT();
|
||||
#if defined (PLATFORM_HAS_BUTTON)
|
||||
if (ev == sensors_event && data == &button_sensor) {
|
||||
PRINTF("BUTTON\n");
|
||||
#if REST_RES_EVENT
|
||||
/* Call the event_handler for this application-specific event. */
|
||||
event_event_handler(&resource_event);
|
||||
#endif
|
||||
}
|
||||
#endif /* PLATFORM_HAS_BUTTON */
|
||||
} /* while (1) */
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
1298
examples/osd/arduino-merkurboard/er-plugtest-server.c
Normal file
1298
examples/osd/arduino-merkurboard/er-plugtest-server.c
Normal file
File diff suppressed because it is too large
Load diff
2
examples/osd/arduino-merkurboard/flash.sh
Executable file
2
examples/osd/arduino-merkurboard/flash.sh
Executable file
|
|
@ -0,0 +1,2 @@
|
|||
#!/bin/bash
|
||||
sudo avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U flash:w:er-example-server.osd-merkur.hex:a -U eeprom:w:er-example-server.osd-merkur.eep:a
|
||||
2
examples/osd/arduino-merkurboard/flashclient.sh
Executable file
2
examples/osd/arduino-merkurboard/flashclient.sh
Executable file
|
|
@ -0,0 +1,2 @@
|
|||
#!/bin/bash
|
||||
sudo avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U flash:w:er-example-client.osd-merkur.hex:a -U eeprom:w:er-example-client.osd-merkur.eep:a
|
||||
10
examples/osd/arduino-merkurboard/in6addr.patch
Normal file
10
examples/osd/arduino-merkurboard/in6addr.patch
Normal file
|
|
@ -0,0 +1,10 @@
|
|||
21,23c21
|
||||
< #ifdef __INSIDE_CYGWIN__
|
||||
< uint32_t __s6_addr32[4];
|
||||
< #endif
|
||||
---
|
||||
> u_int __s6_addr32[4];
|
||||
36d33
|
||||
< #ifdef __INSIDE_CYGWIN__
|
||||
39d35
|
||||
< #endif
|
||||
102
examples/osd/arduino-merkurboard/project-conf.h
Normal file
102
examples/osd/arduino-merkurboard/project-conf.h
Normal file
|
|
@ -0,0 +1,102 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Matthias Kovatsch
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef PROJECT_ERBIUM_CONF_H_
|
||||
#define PROJECT_ERBIUM_CONF_H_
|
||||
|
||||
#define PLATFORM_HAS_LED 1
|
||||
#define PLATFORM_HAS_BUTTON 1
|
||||
#define PLATFORM_HAS_TEMPERATURE 1
|
||||
#define PLATFORM_HAS_BATTERY 1
|
||||
|
||||
/* Some platforms have weird includes. */
|
||||
// #undef IEEE802154_CONF_PANID
|
||||
// #define IEEE802154_CONF_PANID 0xAAAA
|
||||
|
||||
/* Disabling RDC for demo purposes. Core updates often require more memory. */
|
||||
/* For projects, optimize memory and enable RDC again. */
|
||||
// #undef NETSTACK_CONF_RDC
|
||||
//#define NETSTACK_CONF_RDC nullrdc_driver
|
||||
|
||||
// enabel LEAF-NODE mode
|
||||
//#define RPL_CONF_LEAF_ONLY 1
|
||||
|
||||
/* Increase rpl-border-router IP-buffer when using more than 64. */
|
||||
#undef REST_MAX_CHUNK_SIZE
|
||||
#define REST_MAX_CHUNK_SIZE 64
|
||||
|
||||
/* Estimate your header size, especially when using Proxy-Uri. */
|
||||
/*
|
||||
#undef COAP_MAX_HEADER_SIZE
|
||||
#define COAP_MAX_HEADER_SIZE 70
|
||||
*/
|
||||
|
||||
/* The IP buffer size must fit all other hops, in particular the border router. */
|
||||
|
||||
#undef UIP_CONF_BUFFER_SIZE
|
||||
#define UIP_CONF_BUFFER_SIZE 256
|
||||
|
||||
|
||||
/* Multiplies with chunk size, be aware of memory constraints. */
|
||||
#undef COAP_MAX_OPEN_TRANSACTIONS
|
||||
#define COAP_MAX_OPEN_TRANSACTIONS 4
|
||||
|
||||
/* Must be <= open transaction number, default is COAP_MAX_OPEN_TRANSACTIONS-1. */
|
||||
/*
|
||||
#undef COAP_MAX_OBSERVERS
|
||||
#define COAP_MAX_OBSERVERS 2
|
||||
*/
|
||||
|
||||
/* Filtering .well-known/core per query can be disabled to save space. */
|
||||
/*
|
||||
#undef COAP_LINK_FORMAT_FILTERING
|
||||
#define COAP_LINK_FORMAT_FILTERING 0
|
||||
*/
|
||||
|
||||
/* Save some memory for the sky platform. */
|
||||
/*
|
||||
#undef NBR_TABLE_CONF_MAX_NEIGHBORS
|
||||
#define NBR_TABLE_CONF_MAX_NEIGHBORS 10
|
||||
#undef UIP_CONF_MAX_ROUTES
|
||||
#define UIP_CONF_MAX_ROUTES 10
|
||||
*/
|
||||
|
||||
/* Reduce 802.15.4 frame queue to save RAM. */
|
||||
/*
|
||||
#undef QUEUEBUF_CONF_NUM
|
||||
#define QUEUEBUF_CONF_NUM 4
|
||||
*/
|
||||
|
||||
/*
|
||||
#undef SICSLOWPAN_CONF_FRAG
|
||||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
*/
|
||||
#endif /* PROJECT_ERBIUM_CONF_H_ */
|
||||
8
examples/osd/arduino-merkurboard/run.sh
Executable file
8
examples/osd/arduino-merkurboard/run.sh
Executable file
|
|
@ -0,0 +1,8 @@
|
|||
#!/bin/bash
|
||||
# For the new bootloader (using a jump-table) you want to use
|
||||
# BOOTLOADER_GET_MAC=0x0001ff80 (which is the current default)
|
||||
make clean TARGET=osd-merkur
|
||||
make TARGET=osd-merkur BOOTLOADER_GET_MAC=0x0001f3a0
|
||||
avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-merkur
|
||||
avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.hex
|
||||
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.eep
|
||||
8
examples/osd/arduino-merkurboard/runclient.sh
Executable file
8
examples/osd/arduino-merkurboard/runclient.sh
Executable file
|
|
@ -0,0 +1,8 @@
|
|||
#!/bin/bash
|
||||
# For the new bootloader (using a jump-table) you want to use
|
||||
# BOOTLOADER_GET_MAC=0x0001ff80 (which is the current default)
|
||||
make clean TARGET=osd-merkur
|
||||
make TARGET=osd-merkur BOOTLOADER_GET_MAC=0x0001f3a0
|
||||
avr-size -C --mcu=MCU=atmega128rfa1 er-example-client.osd-merkur
|
||||
avr-objcopy -j .text -j .data -O ihex er-example-client.osd-merkur er-example-client.osd-merkur.hex
|
||||
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex er-example-client.osd-merkur er-example-client.osd-merkur.eep
|
||||
227
examples/osd/arduino-merkurboard/server-client.csc
Normal file
227
examples/osd/arduino-merkurboard/server-client.csc
Normal file
|
|
@ -0,0 +1,227 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<simconf>
|
||||
<project EXPORT="discard">[APPS_DIR]/mrm</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/mspsim</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/avrora</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/serial_socket</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/collect-view</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/powertracker</project>
|
||||
<simulation>
|
||||
<title>REST with RPL router</title>
|
||||
<randomseed>123456</randomseed>
|
||||
<motedelay_us>1000000</motedelay_us>
|
||||
<radiomedium>
|
||||
se.sics.cooja.radiomediums.UDGM
|
||||
<transmitting_range>50.0</transmitting_range>
|
||||
<interference_range>50.0</interference_range>
|
||||
<success_ratio_tx>1.0</success_ratio_tx>
|
||||
<success_ratio_rx>1.0</success_ratio_rx>
|
||||
</radiomedium>
|
||||
<events>
|
||||
<logoutput>40000</logoutput>
|
||||
</events>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>rplroot</identifier>
|
||||
<description>Sky RPL Root</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.c</source>
|
||||
<commands EXPORT="discard">make border-router.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.Msp802154Radio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>server</identifier>
|
||||
<description>Erbium Server</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.c</source>
|
||||
<commands EXPORT="discard">make er-example-server.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.Msp802154Radio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>client</identifier>
|
||||
<description>Erbium Client</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/er-rest-example/er-example-client.c</source>
|
||||
<commands EXPORT="discard">make er-example-client.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/er-rest-example/er-example-client.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.Msp802154Radio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>33.260163187353555</x>
|
||||
<y>30.643217359962595</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>1</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>rplroot</motetype_identifier>
|
||||
</mote>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>46.57186415376375</x>
|
||||
<y>40.35946215910942</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>2</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>server</motetype_identifier>
|
||||
</mote>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>18.638049428485125</x>
|
||||
<y>47.55034515769599</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>3</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>client</motetype_identifier>
|
||||
</mote>
|
||||
</simulation>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.SimControl
|
||||
<width>259</width>
|
||||
<z>0</z>
|
||||
<height>179</height>
|
||||
<location_x>0</location_x>
|
||||
<location_y>0</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.Visualizer
|
||||
<plugin_config>
|
||||
<skin>se.sics.cooja.plugins.skins.IDVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.UDGMVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.MoteTypeVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.AttributeVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.LEDVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.AddressVisualizerSkin</skin>
|
||||
<viewport>3.61568947862321 0.0 0.0 3.61568947862321 15.610600779367 -85.92728269158351</viewport>
|
||||
</plugin_config>
|
||||
<width>300</width>
|
||||
<z>2</z>
|
||||
<height>178</height>
|
||||
<location_x>261</location_x>
|
||||
<location_y>1</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.LogListener
|
||||
<plugin_config>
|
||||
<filter />
|
||||
<coloring />
|
||||
</plugin_config>
|
||||
<width>762</width>
|
||||
<z>3</z>
|
||||
<height>491</height>
|
||||
<location_x>2</location_x>
|
||||
<location_y>182</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.RadioLogger
|
||||
<plugin_config>
|
||||
<split>150</split>
|
||||
<analyzers name="6lowpan" />
|
||||
</plugin_config>
|
||||
<width>451</width>
|
||||
<z>-1</z>
|
||||
<height>305</height>
|
||||
<location_x>73</location_x>
|
||||
<location_y>140</location_y>
|
||||
<minimized>true</minimized>
|
||||
</plugin>
|
||||
<plugin>
|
||||
SerialSocketServer
|
||||
<mote_arg>0</mote_arg>
|
||||
<width>422</width>
|
||||
<z>4</z>
|
||||
<height>74</height>
|
||||
<location_x>578</location_x>
|
||||
<location_y>18</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.TimeLine
|
||||
<plugin_config>
|
||||
<mote>0</mote>
|
||||
<mote>1</mote>
|
||||
<mote>2</mote>
|
||||
<showRadioRXTX />
|
||||
<showRadioHW />
|
||||
<showLEDs />
|
||||
<showWatchpoints />
|
||||
<split>125</split>
|
||||
<zoomfactor>25.49079397896416</zoomfactor>
|
||||
</plugin_config>
|
||||
<width>1624</width>
|
||||
<z>5</z>
|
||||
<height>252</height>
|
||||
<location_x>6</location_x>
|
||||
<location_y>712</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.MoteInterfaceViewer
|
||||
<mote_arg>2</mote_arg>
|
||||
<plugin_config>
|
||||
<interface>Serial port</interface>
|
||||
<scrollpos>0,0</scrollpos>
|
||||
</plugin_config>
|
||||
<width>853</width>
|
||||
<z>1</z>
|
||||
<height>491</height>
|
||||
<location_x>765</location_x>
|
||||
<location_y>182</location_y>
|
||||
</plugin>
|
||||
</simconf>
|
||||
|
||||
189
examples/osd/arduino-merkurboard/server-only.csc
Normal file
189
examples/osd/arduino-merkurboard/server-only.csc
Normal file
|
|
@ -0,0 +1,189 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<simconf>
|
||||
<project EXPORT="discard">[APPS_DIR]/mrm</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/mspsim</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/avrora</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/serial_socket</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/collect-view</project>
|
||||
<project EXPORT="discard">[APPS_DIR]/powertracker</project>
|
||||
<simulation>
|
||||
<title>REST with RPL router</title>
|
||||
<randomseed>123456</randomseed>
|
||||
<motedelay_us>1000000</motedelay_us>
|
||||
<radiomedium>
|
||||
se.sics.cooja.radiomediums.UDGM
|
||||
<transmitting_range>50.0</transmitting_range>
|
||||
<interference_range>50.0</interference_range>
|
||||
<success_ratio_tx>1.0</success_ratio_tx>
|
||||
<success_ratio_rx>1.0</success_ratio_rx>
|
||||
</radiomedium>
|
||||
<events>
|
||||
<logoutput>40000</logoutput>
|
||||
</events>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>rplroot</identifier>
|
||||
<description>Sky RPL Root</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.c</source>
|
||||
<commands EXPORT="discard">make border-router.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.Msp802154Radio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>server</identifier>
|
||||
<description>Erbium Server</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.c</source>
|
||||
<commands EXPORT="discard">make er-example-server.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.Msp802154Radio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>33.260163187353555</x>
|
||||
<y>30.643217359962595</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>1</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>rplroot</motetype_identifier>
|
||||
</mote>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>35.100895239785295</x>
|
||||
<y>39.70574552287428</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>2</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>server</motetype_identifier>
|
||||
</mote>
|
||||
</simulation>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.SimControl
|
||||
<width>259</width>
|
||||
<z>0</z>
|
||||
<height>179</height>
|
||||
<location_x>0</location_x>
|
||||
<location_y>0</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.Visualizer
|
||||
<plugin_config>
|
||||
<skin>se.sics.cooja.plugins.skins.IDVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.UDGMVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.MoteTypeVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.AttributeVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.LEDVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.AddressVisualizerSkin</skin>
|
||||
<viewport>7.9849281638410705 0.0 0.0 7.9849281638410705 -133.27812697619663 -225.04752569190535</viewport>
|
||||
</plugin_config>
|
||||
<width>300</width>
|
||||
<z>5</z>
|
||||
<height>175</height>
|
||||
<location_x>263</location_x>
|
||||
<location_y>3</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.LogListener
|
||||
<plugin_config>
|
||||
<filter />
|
||||
<coloring />
|
||||
</plugin_config>
|
||||
<width>560</width>
|
||||
<z>2</z>
|
||||
<height>326</height>
|
||||
<location_x>1</location_x>
|
||||
<location_y>293</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.RadioLogger
|
||||
<plugin_config>
|
||||
<split>150</split>
|
||||
<analyzers name="6lowpan" />
|
||||
</plugin_config>
|
||||
<width>451</width>
|
||||
<z>-1</z>
|
||||
<height>305</height>
|
||||
<location_x>73</location_x>
|
||||
<location_y>140</location_y>
|
||||
<minimized>true</minimized>
|
||||
</plugin>
|
||||
<plugin>
|
||||
SerialSocketServer
|
||||
<mote_arg>0</mote_arg>
|
||||
<width>422</width>
|
||||
<z>3</z>
|
||||
<height>74</height>
|
||||
<location_x>39</location_x>
|
||||
<location_y>199</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.TimeLine
|
||||
<plugin_config>
|
||||
<mote>0</mote>
|
||||
<mote>1</mote>
|
||||
<showRadioRXTX />
|
||||
<showRadioHW />
|
||||
<showLEDs />
|
||||
<showWatchpoints />
|
||||
<split>125</split>
|
||||
<zoomfactor>25.49079397896416</zoomfactor>
|
||||
</plugin_config>
|
||||
<width>1624</width>
|
||||
<z>4</z>
|
||||
<height>252</height>
|
||||
<location_x>4</location_x>
|
||||
<location_y>622</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.MoteInterfaceViewer
|
||||
<mote_arg>1</mote_arg>
|
||||
<plugin_config>
|
||||
<interface>Serial port</interface>
|
||||
<scrollpos>0,0</scrollpos>
|
||||
</plugin_config>
|
||||
<width>702</width>
|
||||
<z>1</z>
|
||||
<height>646</height>
|
||||
<location_x>564</location_x>
|
||||
<location_y>2</location_y>
|
||||
</plugin>
|
||||
</simconf>
|
||||
|
||||
|
|
@ -24,6 +24,8 @@ CONTIKI_TARGET_SOURCEFILES += servo.c servo-sensor.c
|
|||
#CONTIKI_TARGET_SOURCEFILES += t4-servo.c t4-servo-sensor.c
|
||||
#Needed for Relay 1 to 4
|
||||
CONTIKI_TARGET_SOURCEFILES += relay.c relay-sensor.c
|
||||
# Arduino
|
||||
CONTIKI_TARGET_SOURCEFILES += wiring_digital.c
|
||||
|
||||
CONTIKIBOARD=.
|
||||
BOOTLOADER_START = 0x1F000
|
||||
|
|
|
|||
211
platform/osd-merkur/dev/Arduino.h
Normal file
211
platform/osd-merkur/dev/Arduino.h
Normal file
|
|
@ -0,0 +1,211 @@
|
|||
#ifndef Arduino_h
|
||||
#define Arduino_h
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
|
||||
#include "binary.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"{
|
||||
#endif
|
||||
|
||||
#define HIGH 0x1
|
||||
#define LOW 0x0
|
||||
|
||||
#define INPUT 0x0
|
||||
#define OUTPUT 0x1
|
||||
#define INPUT_PULLUP 0x2
|
||||
|
||||
#define true 0x1
|
||||
#define false 0x0
|
||||
|
||||
#define PI 3.1415926535897932384626433832795
|
||||
#define HALF_PI 1.5707963267948966192313216916398
|
||||
#define TWO_PI 6.283185307179586476925286766559
|
||||
#define DEG_TO_RAD 0.017453292519943295769236907684886
|
||||
#define RAD_TO_DEG 57.295779513082320876798154814105
|
||||
|
||||
#define SERIAL 0x0
|
||||
#define DISPLAY 0x1
|
||||
|
||||
#define LSBFIRST 0
|
||||
#define MSBFIRST 1
|
||||
|
||||
#define CHANGE 1
|
||||
#define FALLING 2
|
||||
#define RISING 3
|
||||
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
#define INTERNAL1V1 2
|
||||
#define INTERNAL2V56 3
|
||||
#elif defined(__AVR_ATmega128RFA1__)
|
||||
#else
|
||||
#define INTERNAL 3
|
||||
#endif
|
||||
#define DEFAULT 1
|
||||
#define EXTERNAL 0
|
||||
|
||||
// undefine stdlib's abs if encountered
|
||||
#ifdef abs
|
||||
#undef abs
|
||||
#endif
|
||||
|
||||
#define min(a,b) ((a)<(b)?(a):(b))
|
||||
#define max(a,b) ((a)>(b)?(a):(b))
|
||||
#define abs(x) ((x)>0?(x):-(x))
|
||||
#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
|
||||
#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
|
||||
#define radians(deg) ((deg)*DEG_TO_RAD)
|
||||
#define degrees(rad) ((rad)*RAD_TO_DEG)
|
||||
#define sq(x) ((x)*(x))
|
||||
|
||||
#define interrupts() sei()
|
||||
#define noInterrupts() cli()
|
||||
|
||||
#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
|
||||
#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
|
||||
#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
|
||||
|
||||
#define lowByte(w) ((uint8_t) ((w) & 0xff))
|
||||
#define highByte(w) ((uint8_t) ((w) >> 8))
|
||||
|
||||
#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
|
||||
#define bitSet(value, bit) ((value) |= (1UL << (bit)))
|
||||
#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
|
||||
#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
|
||||
|
||||
|
||||
typedef unsigned int word;
|
||||
|
||||
#define bit(b) (1UL << (b))
|
||||
|
||||
typedef uint8_t boolean;
|
||||
typedef uint8_t byte;
|
||||
|
||||
void init(void);
|
||||
|
||||
void pinMode(uint8_t, uint8_t);
|
||||
void digitalWrite(uint8_t, uint8_t);
|
||||
int digitalRead(uint8_t);
|
||||
int analogRead(uint8_t);
|
||||
void analogReference(uint8_t mode);
|
||||
void analogWrite(uint8_t, int);
|
||||
|
||||
unsigned long millis(void);
|
||||
unsigned long micros(void);
|
||||
void delay(unsigned long);
|
||||
void delayMicroseconds(unsigned int us);
|
||||
unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
|
||||
|
||||
void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
|
||||
uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
|
||||
|
||||
void attachInterrupt(uint8_t, void (*)(void), int mode);
|
||||
void detachInterrupt(uint8_t);
|
||||
|
||||
void setup(void);
|
||||
void loop(void);
|
||||
|
||||
// Get the bit location within the hardware port of the given virtual pin.
|
||||
// This comes from the pins_*.c file for the active board configuration.
|
||||
|
||||
#define analogInPinToBit(P) (P)
|
||||
|
||||
// On the ATmega1280, the addresses of some of the port registers are
|
||||
// greater than 255, so we can't store them in uint8_t's.
|
||||
extern const uint16_t PROGMEM port_to_mode_PGM[];
|
||||
extern const uint16_t PROGMEM port_to_input_PGM[];
|
||||
extern const uint16_t PROGMEM port_to_output_PGM[];
|
||||
|
||||
extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
|
||||
// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
|
||||
extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
|
||||
extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
|
||||
|
||||
// Get the bit location within the hardware port of the given virtual pin.
|
||||
// This comes from the pins_*.c file for the active board configuration.
|
||||
//
|
||||
// These perform slightly better as macros compared to inline functions
|
||||
//
|
||||
#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
|
||||
#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
|
||||
#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
|
||||
#define analogInPinToBit(P) (P)
|
||||
#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
|
||||
#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
|
||||
#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
|
||||
|
||||
#define NOT_A_PIN 0
|
||||
#define NOT_A_PORT 0
|
||||
|
||||
#ifdef ARDUINO_MAIN
|
||||
#define PA 1
|
||||
#define PB 2
|
||||
#define PC 3
|
||||
#define PD 4
|
||||
#define PE 5
|
||||
#define PF 6
|
||||
#define PG 7
|
||||
#define PH 8
|
||||
#define PJ 10
|
||||
#define PK 11
|
||||
#define PL 12
|
||||
#endif
|
||||
|
||||
#define NOT_ON_TIMER 0
|
||||
#define TIMER0A 1
|
||||
#define TIMER0B 2
|
||||
#define TIMER1A 3
|
||||
#define TIMER1B 4
|
||||
#define TIMER1C 5
|
||||
#define TIMER2 6
|
||||
#define TIMER2A 7
|
||||
#define TIMER2B 8
|
||||
|
||||
#define TIMER3A 9
|
||||
#define TIMER3B 10
|
||||
#define TIMER3C 11
|
||||
#define TIMER4A 12
|
||||
#define TIMER4B 13
|
||||
#define TIMER4C 14
|
||||
#define TIMER4D 15
|
||||
#define TIMER5A 16
|
||||
#define TIMER5B 17
|
||||
#define TIMER5C 18
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
#include "WCharacter.h"
|
||||
#include "WString.h"
|
||||
#include "HardwareSerial.h"
|
||||
|
||||
uint16_t makeWord(uint16_t w);
|
||||
uint16_t makeWord(byte h, byte l);
|
||||
|
||||
#define word(...) makeWord(__VA_ARGS__)
|
||||
|
||||
unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
|
||||
|
||||
void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
|
||||
void noTone(uint8_t _pin);
|
||||
|
||||
// WMath prototypes
|
||||
long random(long);
|
||||
long random(long, long);
|
||||
void randomSeed(unsigned int);
|
||||
long map(long, long, long, long, long);
|
||||
|
||||
#endif
|
||||
|
||||
#include "pins_arduino.h"
|
||||
|
||||
#endif
|
||||
515
platform/osd-merkur/dev/binary.h
Normal file
515
platform/osd-merkur/dev/binary.h
Normal file
|
|
@ -0,0 +1,515 @@
|
|||
#ifndef Binary_h
|
||||
#define Binary_h
|
||||
|
||||
#define B0 0
|
||||
#define B00 0
|
||||
#define B000 0
|
||||
#define B0000 0
|
||||
#define B00000 0
|
||||
#define B000000 0
|
||||
#define B0000000 0
|
||||
#define B00000000 0
|
||||
#define B1 1
|
||||
#define B01 1
|
||||
#define B001 1
|
||||
#define B0001 1
|
||||
#define B00001 1
|
||||
#define B000001 1
|
||||
#define B0000001 1
|
||||
#define B00000001 1
|
||||
#define B10 2
|
||||
#define B010 2
|
||||
#define B0010 2
|
||||
#define B00010 2
|
||||
#define B000010 2
|
||||
#define B0000010 2
|
||||
#define B00000010 2
|
||||
#define B11 3
|
||||
#define B011 3
|
||||
#define B0011 3
|
||||
#define B00011 3
|
||||
#define B000011 3
|
||||
#define B0000011 3
|
||||
#define B00000011 3
|
||||
#define B100 4
|
||||
#define B0100 4
|
||||
#define B00100 4
|
||||
#define B000100 4
|
||||
#define B0000100 4
|
||||
#define B00000100 4
|
||||
#define B101 5
|
||||
#define B0101 5
|
||||
#define B00101 5
|
||||
#define B000101 5
|
||||
#define B0000101 5
|
||||
#define B00000101 5
|
||||
#define B110 6
|
||||
#define B0110 6
|
||||
#define B00110 6
|
||||
#define B000110 6
|
||||
#define B0000110 6
|
||||
#define B00000110 6
|
||||
#define B111 7
|
||||
#define B0111 7
|
||||
#define B00111 7
|
||||
#define B000111 7
|
||||
#define B0000111 7
|
||||
#define B00000111 7
|
||||
#define B1000 8
|
||||
#define B01000 8
|
||||
#define B001000 8
|
||||
#define B0001000 8
|
||||
#define B00001000 8
|
||||
#define B1001 9
|
||||
#define B01001 9
|
||||
#define B001001 9
|
||||
#define B0001001 9
|
||||
#define B00001001 9
|
||||
#define B1010 10
|
||||
#define B01010 10
|
||||
#define B001010 10
|
||||
#define B0001010 10
|
||||
#define B00001010 10
|
||||
#define B1011 11
|
||||
#define B01011 11
|
||||
#define B001011 11
|
||||
#define B0001011 11
|
||||
#define B00001011 11
|
||||
#define B1100 12
|
||||
#define B01100 12
|
||||
#define B001100 12
|
||||
#define B0001100 12
|
||||
#define B00001100 12
|
||||
#define B1101 13
|
||||
#define B01101 13
|
||||
#define B001101 13
|
||||
#define B0001101 13
|
||||
#define B00001101 13
|
||||
#define B1110 14
|
||||
#define B01110 14
|
||||
#define B001110 14
|
||||
#define B0001110 14
|
||||
#define B00001110 14
|
||||
#define B1111 15
|
||||
#define B01111 15
|
||||
#define B001111 15
|
||||
#define B0001111 15
|
||||
#define B00001111 15
|
||||
#define B10000 16
|
||||
#define B010000 16
|
||||
#define B0010000 16
|
||||
#define B00010000 16
|
||||
#define B10001 17
|
||||
#define B010001 17
|
||||
#define B0010001 17
|
||||
#define B00010001 17
|
||||
#define B10010 18
|
||||
#define B010010 18
|
||||
#define B0010010 18
|
||||
#define B00010010 18
|
||||
#define B10011 19
|
||||
#define B010011 19
|
||||
#define B0010011 19
|
||||
#define B00010011 19
|
||||
#define B10100 20
|
||||
#define B010100 20
|
||||
#define B0010100 20
|
||||
#define B00010100 20
|
||||
#define B10101 21
|
||||
#define B010101 21
|
||||
#define B0010101 21
|
||||
#define B00010101 21
|
||||
#define B10110 22
|
||||
#define B010110 22
|
||||
#define B0010110 22
|
||||
#define B00010110 22
|
||||
#define B10111 23
|
||||
#define B010111 23
|
||||
#define B0010111 23
|
||||
#define B00010111 23
|
||||
#define B11000 24
|
||||
#define B011000 24
|
||||
#define B0011000 24
|
||||
#define B00011000 24
|
||||
#define B11001 25
|
||||
#define B011001 25
|
||||
#define B0011001 25
|
||||
#define B00011001 25
|
||||
#define B11010 26
|
||||
#define B011010 26
|
||||
#define B0011010 26
|
||||
#define B00011010 26
|
||||
#define B11011 27
|
||||
#define B011011 27
|
||||
#define B0011011 27
|
||||
#define B00011011 27
|
||||
#define B11100 28
|
||||
#define B011100 28
|
||||
#define B0011100 28
|
||||
#define B00011100 28
|
||||
#define B11101 29
|
||||
#define B011101 29
|
||||
#define B0011101 29
|
||||
#define B00011101 29
|
||||
#define B11110 30
|
||||
#define B011110 30
|
||||
#define B0011110 30
|
||||
#define B00011110 30
|
||||
#define B11111 31
|
||||
#define B011111 31
|
||||
#define B0011111 31
|
||||
#define B00011111 31
|
||||
#define B100000 32
|
||||
#define B0100000 32
|
||||
#define B00100000 32
|
||||
#define B100001 33
|
||||
#define B0100001 33
|
||||
#define B00100001 33
|
||||
#define B100010 34
|
||||
#define B0100010 34
|
||||
#define B00100010 34
|
||||
#define B100011 35
|
||||
#define B0100011 35
|
||||
#define B00100011 35
|
||||
#define B100100 36
|
||||
#define B0100100 36
|
||||
#define B00100100 36
|
||||
#define B100101 37
|
||||
#define B0100101 37
|
||||
#define B00100101 37
|
||||
#define B100110 38
|
||||
#define B0100110 38
|
||||
#define B00100110 38
|
||||
#define B100111 39
|
||||
#define B0100111 39
|
||||
#define B00100111 39
|
||||
#define B101000 40
|
||||
#define B0101000 40
|
||||
#define B00101000 40
|
||||
#define B101001 41
|
||||
#define B0101001 41
|
||||
#define B00101001 41
|
||||
#define B101010 42
|
||||
#define B0101010 42
|
||||
#define B00101010 42
|
||||
#define B101011 43
|
||||
#define B0101011 43
|
||||
#define B00101011 43
|
||||
#define B101100 44
|
||||
#define B0101100 44
|
||||
#define B00101100 44
|
||||
#define B101101 45
|
||||
#define B0101101 45
|
||||
#define B00101101 45
|
||||
#define B101110 46
|
||||
#define B0101110 46
|
||||
#define B00101110 46
|
||||
#define B101111 47
|
||||
#define B0101111 47
|
||||
#define B00101111 47
|
||||
#define B110000 48
|
||||
#define B0110000 48
|
||||
#define B00110000 48
|
||||
#define B110001 49
|
||||
#define B0110001 49
|
||||
#define B00110001 49
|
||||
#define B110010 50
|
||||
#define B0110010 50
|
||||
#define B00110010 50
|
||||
#define B110011 51
|
||||
#define B0110011 51
|
||||
#define B00110011 51
|
||||
#define B110100 52
|
||||
#define B0110100 52
|
||||
#define B00110100 52
|
||||
#define B110101 53
|
||||
#define B0110101 53
|
||||
#define B00110101 53
|
||||
#define B110110 54
|
||||
#define B0110110 54
|
||||
#define B00110110 54
|
||||
#define B110111 55
|
||||
#define B0110111 55
|
||||
#define B00110111 55
|
||||
#define B111000 56
|
||||
#define B0111000 56
|
||||
#define B00111000 56
|
||||
#define B111001 57
|
||||
#define B0111001 57
|
||||
#define B00111001 57
|
||||
#define B111010 58
|
||||
#define B0111010 58
|
||||
#define B00111010 58
|
||||
#define B111011 59
|
||||
#define B0111011 59
|
||||
#define B00111011 59
|
||||
#define B111100 60
|
||||
#define B0111100 60
|
||||
#define B00111100 60
|
||||
#define B111101 61
|
||||
#define B0111101 61
|
||||
#define B00111101 61
|
||||
#define B111110 62
|
||||
#define B0111110 62
|
||||
#define B00111110 62
|
||||
#define B111111 63
|
||||
#define B0111111 63
|
||||
#define B00111111 63
|
||||
#define B1000000 64
|
||||
#define B01000000 64
|
||||
#define B1000001 65
|
||||
#define B01000001 65
|
||||
#define B1000010 66
|
||||
#define B01000010 66
|
||||
#define B1000011 67
|
||||
#define B01000011 67
|
||||
#define B1000100 68
|
||||
#define B01000100 68
|
||||
#define B1000101 69
|
||||
#define B01000101 69
|
||||
#define B1000110 70
|
||||
#define B01000110 70
|
||||
#define B1000111 71
|
||||
#define B01000111 71
|
||||
#define B1001000 72
|
||||
#define B01001000 72
|
||||
#define B1001001 73
|
||||
#define B01001001 73
|
||||
#define B1001010 74
|
||||
#define B01001010 74
|
||||
#define B1001011 75
|
||||
#define B01001011 75
|
||||
#define B1001100 76
|
||||
#define B01001100 76
|
||||
#define B1001101 77
|
||||
#define B01001101 77
|
||||
#define B1001110 78
|
||||
#define B01001110 78
|
||||
#define B1001111 79
|
||||
#define B01001111 79
|
||||
#define B1010000 80
|
||||
#define B01010000 80
|
||||
#define B1010001 81
|
||||
#define B01010001 81
|
||||
#define B1010010 82
|
||||
#define B01010010 82
|
||||
#define B1010011 83
|
||||
#define B01010011 83
|
||||
#define B1010100 84
|
||||
#define B01010100 84
|
||||
#define B1010101 85
|
||||
#define B01010101 85
|
||||
#define B1010110 86
|
||||
#define B01010110 86
|
||||
#define B1010111 87
|
||||
#define B01010111 87
|
||||
#define B1011000 88
|
||||
#define B01011000 88
|
||||
#define B1011001 89
|
||||
#define B01011001 89
|
||||
#define B1011010 90
|
||||
#define B01011010 90
|
||||
#define B1011011 91
|
||||
#define B01011011 91
|
||||
#define B1011100 92
|
||||
#define B01011100 92
|
||||
#define B1011101 93
|
||||
#define B01011101 93
|
||||
#define B1011110 94
|
||||
#define B01011110 94
|
||||
#define B1011111 95
|
||||
#define B01011111 95
|
||||
#define B1100000 96
|
||||
#define B01100000 96
|
||||
#define B1100001 97
|
||||
#define B01100001 97
|
||||
#define B1100010 98
|
||||
#define B01100010 98
|
||||
#define B1100011 99
|
||||
#define B01100011 99
|
||||
#define B1100100 100
|
||||
#define B01100100 100
|
||||
#define B1100101 101
|
||||
#define B01100101 101
|
||||
#define B1100110 102
|
||||
#define B01100110 102
|
||||
#define B1100111 103
|
||||
#define B01100111 103
|
||||
#define B1101000 104
|
||||
#define B01101000 104
|
||||
#define B1101001 105
|
||||
#define B01101001 105
|
||||
#define B1101010 106
|
||||
#define B01101010 106
|
||||
#define B1101011 107
|
||||
#define B01101011 107
|
||||
#define B1101100 108
|
||||
#define B01101100 108
|
||||
#define B1101101 109
|
||||
#define B01101101 109
|
||||
#define B1101110 110
|
||||
#define B01101110 110
|
||||
#define B1101111 111
|
||||
#define B01101111 111
|
||||
#define B1110000 112
|
||||
#define B01110000 112
|
||||
#define B1110001 113
|
||||
#define B01110001 113
|
||||
#define B1110010 114
|
||||
#define B01110010 114
|
||||
#define B1110011 115
|
||||
#define B01110011 115
|
||||
#define B1110100 116
|
||||
#define B01110100 116
|
||||
#define B1110101 117
|
||||
#define B01110101 117
|
||||
#define B1110110 118
|
||||
#define B01110110 118
|
||||
#define B1110111 119
|
||||
#define B01110111 119
|
||||
#define B1111000 120
|
||||
#define B01111000 120
|
||||
#define B1111001 121
|
||||
#define B01111001 121
|
||||
#define B1111010 122
|
||||
#define B01111010 122
|
||||
#define B1111011 123
|
||||
#define B01111011 123
|
||||
#define B1111100 124
|
||||
#define B01111100 124
|
||||
#define B1111101 125
|
||||
#define B01111101 125
|
||||
#define B1111110 126
|
||||
#define B01111110 126
|
||||
#define B1111111 127
|
||||
#define B01111111 127
|
||||
#define B10000000 128
|
||||
#define B10000001 129
|
||||
#define B10000010 130
|
||||
#define B10000011 131
|
||||
#define B10000100 132
|
||||
#define B10000101 133
|
||||
#define B10000110 134
|
||||
#define B10000111 135
|
||||
#define B10001000 136
|
||||
#define B10001001 137
|
||||
#define B10001010 138
|
||||
#define B10001011 139
|
||||
#define B10001100 140
|
||||
#define B10001101 141
|
||||
#define B10001110 142
|
||||
#define B10001111 143
|
||||
#define B10010000 144
|
||||
#define B10010001 145
|
||||
#define B10010010 146
|
||||
#define B10010011 147
|
||||
#define B10010100 148
|
||||
#define B10010101 149
|
||||
#define B10010110 150
|
||||
#define B10010111 151
|
||||
#define B10011000 152
|
||||
#define B10011001 153
|
||||
#define B10011010 154
|
||||
#define B10011011 155
|
||||
#define B10011100 156
|
||||
#define B10011101 157
|
||||
#define B10011110 158
|
||||
#define B10011111 159
|
||||
#define B10100000 160
|
||||
#define B10100001 161
|
||||
#define B10100010 162
|
||||
#define B10100011 163
|
||||
#define B10100100 164
|
||||
#define B10100101 165
|
||||
#define B10100110 166
|
||||
#define B10100111 167
|
||||
#define B10101000 168
|
||||
#define B10101001 169
|
||||
#define B10101010 170
|
||||
#define B10101011 171
|
||||
#define B10101100 172
|
||||
#define B10101101 173
|
||||
#define B10101110 174
|
||||
#define B10101111 175
|
||||
#define B10110000 176
|
||||
#define B10110001 177
|
||||
#define B10110010 178
|
||||
#define B10110011 179
|
||||
#define B10110100 180
|
||||
#define B10110101 181
|
||||
#define B10110110 182
|
||||
#define B10110111 183
|
||||
#define B10111000 184
|
||||
#define B10111001 185
|
||||
#define B10111010 186
|
||||
#define B10111011 187
|
||||
#define B10111100 188
|
||||
#define B10111101 189
|
||||
#define B10111110 190
|
||||
#define B10111111 191
|
||||
#define B11000000 192
|
||||
#define B11000001 193
|
||||
#define B11000010 194
|
||||
#define B11000011 195
|
||||
#define B11000100 196
|
||||
#define B11000101 197
|
||||
#define B11000110 198
|
||||
#define B11000111 199
|
||||
#define B11001000 200
|
||||
#define B11001001 201
|
||||
#define B11001010 202
|
||||
#define B11001011 203
|
||||
#define B11001100 204
|
||||
#define B11001101 205
|
||||
#define B11001110 206
|
||||
#define B11001111 207
|
||||
#define B11010000 208
|
||||
#define B11010001 209
|
||||
#define B11010010 210
|
||||
#define B11010011 211
|
||||
#define B11010100 212
|
||||
#define B11010101 213
|
||||
#define B11010110 214
|
||||
#define B11010111 215
|
||||
#define B11011000 216
|
||||
#define B11011001 217
|
||||
#define B11011010 218
|
||||
#define B11011011 219
|
||||
#define B11011100 220
|
||||
#define B11011101 221
|
||||
#define B11011110 222
|
||||
#define B11011111 223
|
||||
#define B11100000 224
|
||||
#define B11100001 225
|
||||
#define B11100010 226
|
||||
#define B11100011 227
|
||||
#define B11100100 228
|
||||
#define B11100101 229
|
||||
#define B11100110 230
|
||||
#define B11100111 231
|
||||
#define B11101000 232
|
||||
#define B11101001 233
|
||||
#define B11101010 234
|
||||
#define B11101011 235
|
||||
#define B11101100 236
|
||||
#define B11101101 237
|
||||
#define B11101110 238
|
||||
#define B11101111 239
|
||||
#define B11110000 240
|
||||
#define B11110001 241
|
||||
#define B11110010 242
|
||||
#define B11110011 243
|
||||
#define B11110100 244
|
||||
#define B11110101 245
|
||||
#define B11110110 246
|
||||
#define B11110111 247
|
||||
#define B11111000 248
|
||||
#define B11111001 249
|
||||
#define B11111010 250
|
||||
#define B11111011 251
|
||||
#define B11111100 252
|
||||
#define B11111101 253
|
||||
#define B11111110 254
|
||||
#define B11111111 255
|
||||
|
||||
#endif
|
||||
262
platform/osd-merkur/dev/pins_arduino.h
Normal file
262
platform/osd-merkur/dev/pins_arduino.h
Normal file
|
|
@ -0,0 +1,262 @@
|
|||
/*
|
||||
pins_arduino.h - Pin definition functions for Arduino
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2014 Harald Pichler
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id: wiring.h 249 2014-04-18 17:35:12Z pichler $
|
||||
*/
|
||||
|
||||
/*
|
||||
This version of pins_arduino.h is for the Merkur Dev Board r1
|
||||
Harald Pichler 2014 Apr 18
|
||||
*/
|
||||
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#define NUM_DIGITAL_PINS 15
|
||||
#define NUM_ANALOG_INPUTS 6
|
||||
#define analogInputToDigitalPin(p) ((p < NUM_ANALOG_INPUTS) ? (p) + NUM_DIGITAL_PINS : -1)
|
||||
#define digitalPinHasPWM(p) ((p) == 2 ||(p) == 3 ||(p) == 4 ||(p) == 14 )
|
||||
|
||||
// Dev board specific defines: RF RX and TX LEDs:
|
||||
#define RXLED_DDR DDRB
|
||||
#define RXLED_PORT PORTB
|
||||
#define RXLED_POS PB6
|
||||
|
||||
#define TXLED_DDR DDRB
|
||||
#define TXLED_PORT PORTB
|
||||
#define TXLED_POS PB7
|
||||
|
||||
const static uint8_t SS = 10;
|
||||
const static uint8_t MOSI = 11;
|
||||
const static uint8_t MISO = 13;
|
||||
const static uint8_t SCK = 12;
|
||||
|
||||
const static uint8_t SDA = 9;
|
||||
const static uint8_t SCL = 8;
|
||||
const static uint8_t LED = 4;
|
||||
const static uint8_t LED1 = 4;
|
||||
const static uint8_t LED2 = 5;
|
||||
|
||||
const static uint8_t A0 = 15;
|
||||
const static uint8_t A1 = 16;
|
||||
const static uint8_t A2 = 17;
|
||||
const static uint8_t A3 = 18;
|
||||
const static uint8_t A4 = 19;
|
||||
const static uint8_t A5 = 20;
|
||||
//const static uint8_t A6 = 21;
|
||||
//const static uint8_t A7 = 22;
|
||||
|
||||
// A majority of the pins are NOT PCINTs, SO BE WARNED (i.e. you cannot use them as receive pins)
|
||||
// Only pins available for RECEIVE (TRANSMIT can be on any pin):
|
||||
// Pins: 10, 11, 12, 13, 14
|
||||
|
||||
#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 14)) || ? (&PCICR) : ((uint8_t *)0) )
|
||||
|
||||
#define digitalPinToPCICRbit(p) ( 0 )
|
||||
|
||||
#define digitalPinToPCMSK(p) ( (((p) >= 10) && ((p) <= 14)) ? (&PCMSK0) : ((uint8_t *)0) )
|
||||
|
||||
#define digitalPinToPCMSKbit(p) ( ((p) == 10) ? 6 : \
|
||||
( ((p) == 11) ? 5 : \
|
||||
( ((p) == 12) ? 1 : \
|
||||
( ((p) == 13) ? 3 : \
|
||||
( ((p) == 14) ? 7 : \
|
||||
0 ) ) ) ) )
|
||||
|
||||
#ifdef ARDUINO_MAIN
|
||||
|
||||
const uint16_t PROGMEM port_to_mode_PGM[] = {
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
(uint16_t)&DDRB,
|
||||
NOT_A_PORT,
|
||||
(uint16_t)&DDRD,
|
||||
(uint16_t)&DDRE,
|
||||
(uint16_t)&DDRF,
|
||||
(uint16_t)&DDRG,
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM port_to_output_PGM[] = {
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
(uint16_t)&PORTB,
|
||||
NOT_A_PORT,
|
||||
(uint16_t)&PORTD,
|
||||
(uint16_t)&PORTE,
|
||||
(uint16_t)&PORTF,
|
||||
(uint16_t)&PORTG,
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
NOT_A_PORT,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM port_to_input_PGM[] = {
|
||||
NOT_A_PIN,
|
||||
NOT_A_PIN,
|
||||
NOT_A_PIN,
|
||||
(uint16_t)&PINC,
|
||||
(uint16_t)&PIND,
|
||||
(uint16_t)&PINE,
|
||||
(uint16_t)&PINF,
|
||||
(uint16_t)&PING,
|
||||
NOT_A_PIN,
|
||||
NOT_A_PIN,
|
||||
NOT_A_PIN,
|
||||
NOT_A_PIN,
|
||||
NOT_A_PIN,
|
||||
};
|
||||
|
||||
const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
|
||||
// PORTLIST
|
||||
// -------------------------------------------
|
||||
PE , // PE 1 ** 0 ** D0 / USART0_TX
|
||||
PE , // PE 0 ** 1 ** D1 / USART0_RX
|
||||
PE , // PE 3 ** 2 ** D2 / PWM
|
||||
PE , // PE 4 ** 3 ** D3 / PWM
|
||||
PE , // PE 5 ** 4 ** D4 / PWM / LED1 / LED
|
||||
PE , // PE 6 ** 5 ** D5 / LED2
|
||||
PD , // PD 3 ** 6 ** D6 / USART1_TX
|
||||
PD , // PD 2 ** 7 ** D7 / USART1_RX
|
||||
PD , // PD 0 ** 8 ** D8 / I2C_SCL
|
||||
PD , // PD 1 ** 9 ** D9 / I2C_SDA
|
||||
PB , // PB 0 ** 10 ** D10 / SPI_SSN
|
||||
PB , // PB 2 ** 11 ** D11 / SPI_MOSI
|
||||
PB , // PB 1 ** 12 ** D12 / SPI_SCK
|
||||
PB , // PB 3 ** 13 ** D13 / SPI_MISO
|
||||
PB , // PB 4 ** 14 ** D14 / PWM
|
||||
PF , // PF 7 ** 15 ** A0 / D15
|
||||
PF , // PF 6 ** 16 ** A1 / D16
|
||||
PF , // PF 5 ** 17 ** A2 / D17
|
||||
PF , // PF 4 ** 18 ** A3 / D18
|
||||
PF , // PF 0 ** 19 ** A4 / D19
|
||||
PF , // PF 1 ** 20 ** A5 / D20
|
||||
// PB , // PB 6 ** 34 ** D34 / LED1 / LED / PWM
|
||||
// PB , // PB 7 ** 35 ** D35 / LED2 / PWM
|
||||
// PE , // PE 2 ** 2 ** D2
|
||||
// PE , // PE 7 ** 7 ** D7
|
||||
// PB , // PB 5 ** 8 ** D8 / PWM
|
||||
// PG , // PG 0 ** 16 ** D16
|
||||
// PG , // PG 1 ** 17 ** D17
|
||||
// PG , // PG 2 ** 18 ** D18
|
||||
// PG , // PG 5 ** 19 ** D19 / PWM
|
||||
// PD , // PD 4 ** 22 ** D22
|
||||
// PD , // PD 5 ** 23 ** D23
|
||||
// PD , // PD 6 ** 24 ** D24
|
||||
// PD , // PD 7 ** 25 ** D25
|
||||
// PF , // PF 2 ** 28 ** A2 / D28
|
||||
// PF , // PF 3 ** 29 ** A3 / D29
|
||||
};
|
||||
|
||||
const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
|
||||
// PIN IN PORT
|
||||
// -------------------------------------------
|
||||
_BV( 1 ) , // PE 1 ** 0 ** USART0_TX
|
||||
_BV( 0 ) , // PE 0 ** 1 ** USART0_RX
|
||||
_BV( 3 ) , // PE 3 ** 2 ** D3 / PWM
|
||||
_BV( 4 ) , // PE 4 ** 3 ** D4 / PWM
|
||||
_BV( 5 ) , // PE 5 ** 4 ** D5 / PWM
|
||||
_BV( 6 ) , // PE 6 ** 5 ** D6
|
||||
_BV( 3 ) , // PD 3 ** 6 ** D21 / USART1_TX
|
||||
_BV( 2 ) , // PD 2 ** 7 ** D20 / USART1_RX
|
||||
_BV( 0 ) , // PD 0 ** 8 ** D15 / I2C_SCL
|
||||
_BV( 1 ) , // PD 1 ** 9 ** D14 / I2C_SDA
|
||||
_BV( 0 ) , // PB 0 ** 10 ** D10 / SPI_SSN
|
||||
_BV( 2 ) , // PB 2 ** 11 ** D11 / SPI_MOSI
|
||||
_BV( 1 ) , // PB 1 ** 12 ** D13 / SPI_SCK
|
||||
_BV( 3 ) , // PB 3 ** 13 ** D12 / SPI_MISO
|
||||
_BV( 4 ) , // PB 4 ** 14 ** D9 / PWM
|
||||
_BV( 7 ) , // PF 7 ** 15 ** A0 / D33
|
||||
_BV( 6 ) , // PF 6 ** 16 ** A1 / D32
|
||||
_BV( 5 ) , // PF 5 ** 17 ** A2 / D31
|
||||
_BV( 4 ) , // PF 4 ** 18 ** A3 / D30
|
||||
_BV( 0 ) , // PF 0 ** 19 ** A4 / D26
|
||||
_BV( 1 ) , // PF 1 ** 20 ** A5 / D27
|
||||
// _BV( 2 ) , // PE 2 ** 2 ** D2
|
||||
// _BV( 7 ) , // PE 7 ** 7 ** D7
|
||||
// _BV( 5 ) , // PB 5 ** 8 ** D8 / PWM
|
||||
// _BV( 0 ) , // PG 0 ** 16 ** D16
|
||||
// _BV( 1 ) , // PG 1 ** 17 ** D17
|
||||
// _BV( 2 ) , // PG 2 ** 18 ** D18
|
||||
// _BV( 5 ) , // PG 5 ** 19 ** D19 / PWM
|
||||
// _BV( 4 ) , // PD 4 ** 22 ** D22
|
||||
// _BV( 5 ) , // PD 5 ** 23 ** D23
|
||||
// _BV( 6 ) , // PD 6 ** 24 ** D24
|
||||
// _BV( 7 ) , // PD 7 ** 25 ** D25
|
||||
// _BV( 2 ) , // PF 2 ** 28 ** A2 / D28
|
||||
// _BV( 3 ) , // PF 3 ** 29 ** A3 / D29
|
||||
// _BV( 6 ) , // PB 6 ** 34 ** D34 / LED1 / LED / PWM
|
||||
// _BV( 7 ) , // PB 7 ** 35 ** D35 / LED2 / PWM
|
||||
};
|
||||
|
||||
// !!!
|
||||
const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
|
||||
// TIMERS
|
||||
// -------------------------------------------
|
||||
NOT_ON_TIMER , // PE 1 ** 0 ** USART0_TX
|
||||
NOT_ON_TIMER , // PE 0 ** 1 ** USART0_RX
|
||||
TIMER3A , // PE 3 ** 2 ** D3 / PWM
|
||||
TIMER3B , // PE 4 ** 3 ** D4 / PWM
|
||||
TIMER3C , // PE 5 ** 4 ** D5 / PWM
|
||||
NOT_ON_TIMER , // PE 6 ** 5 ** D6
|
||||
NOT_ON_TIMER , // PD 3 ** 6 ** D21 / USART1_TX
|
||||
NOT_ON_TIMER , // PD 2 ** 7 ** D20 / USART1_RX
|
||||
NOT_ON_TIMER , // PD 0 ** 8 ** D15 / I2C_SCL
|
||||
NOT_ON_TIMER , // PD 1 ** 9 ** D14 / I2C_SDA
|
||||
NOT_ON_TIMER , // PB 0 ** 10 ** D10 / SPI_SSN
|
||||
NOT_ON_TIMER , // PB 2 ** 11 ** D11 / SPI_MOSI
|
||||
NOT_ON_TIMER , // PB 1 ** 12 ** D13 / SPI_SCK
|
||||
NOT_ON_TIMER , // PB 3 ** 13 ** D12 / SPI_MISO
|
||||
TIMER2A , // PB 4 ** 14 ** D9 / PWM
|
||||
NOT_ON_TIMER , // PF 7 ** 15 ** A0 / D33
|
||||
NOT_ON_TIMER , // PF 6 ** 16 ** A1 / D32
|
||||
NOT_ON_TIMER , // PF 5 ** 17 ** A2 / D31
|
||||
NOT_ON_TIMER , // PF 4 ** 18 ** A3 / D30
|
||||
NOT_ON_TIMER , // PF 0 ** 19 ** A4 / D26
|
||||
NOT_ON_TIMER , // PF 1 ** 20 ** A5 / D27
|
||||
// NOT_ON_TIMER , // PF 2 ** 28 ** A6 / D28
|
||||
// NOT_ON_TIMER , // PF 3 ** 29 ** A7 / D29
|
||||
// NOT_ON_TIMER , // PE 2 ** 2 ** D2
|
||||
// NOT_ON_TIMER , // PE 7 ** 7 ** D7
|
||||
// TIMER1A , // PB 5 ** 8 ** D8 / PWM
|
||||
// NOT_ON_TIMER , // PG 0 ** 16 ** D16
|
||||
// NOT_ON_TIMER , // PG 1 ** 17 ** D17
|
||||
// NOT_ON_TIMER , // PG 2 ** 18 ** D18
|
||||
// TIMER0B , // PG 5 ** 19 ** D19 / PWM
|
||||
// NOT_ON_TIMER , // PD 4 ** 22 ** D22
|
||||
// NOT_ON_TIMER , // PD 5 ** 23 ** D23
|
||||
// NOT_ON_TIMER , // PD 6 ** 24 ** D24
|
||||
// NOT_ON_TIMER , // PD 7 ** 25 ** D25
|
||||
// TIMER1B , // PB 6 ** 34 ** D34/ PWM
|
||||
// TIMER1C , // PB 7 ** 35 ** D35 / PWM
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
324
platform/osd-merkur/dev/wiring.c
Normal file
324
platform/osd-merkur/dev/wiring.c
Normal file
|
|
@ -0,0 +1,324 @@
|
|||
/*
|
||||
wiring.c - Partial implementation of the Wiring API for the ATmega8.
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id$
|
||||
*/
|
||||
|
||||
#include "wiring_private.h"
|
||||
|
||||
// the prescaler is set so that timer0 ticks every 64 clock cycles, and the
|
||||
// the overflow handler is called every 256 ticks.
|
||||
#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256))
|
||||
|
||||
// the whole number of milliseconds per timer0 overflow
|
||||
#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000)
|
||||
|
||||
// the fractional number of milliseconds per timer0 overflow. we shift right
|
||||
// by three to fit these numbers into a byte. (for the clock speeds we care
|
||||
// about - 8 and 16 MHz - this doesn't lose precision.)
|
||||
#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3)
|
||||
#define FRACT_MAX (1000 >> 3)
|
||||
|
||||
volatile unsigned long timer0_overflow_count = 0;
|
||||
volatile unsigned long timer0_millis = 0;
|
||||
static unsigned char timer0_fract = 0;
|
||||
|
||||
#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
|
||||
SIGNAL(TIM0_OVF_vect)
|
||||
#else
|
||||
SIGNAL(TIMER0_OVF_vect)
|
||||
#endif
|
||||
{
|
||||
// copy these to local variables so they can be stored in registers
|
||||
// (volatile variables must be read from memory on every access)
|
||||
unsigned long m = timer0_millis;
|
||||
unsigned char f = timer0_fract;
|
||||
|
||||
m += MILLIS_INC;
|
||||
f += FRACT_INC;
|
||||
if (f >= FRACT_MAX) {
|
||||
f -= FRACT_MAX;
|
||||
m += 1;
|
||||
}
|
||||
|
||||
timer0_fract = f;
|
||||
timer0_millis = m;
|
||||
timer0_overflow_count++;
|
||||
}
|
||||
|
||||
unsigned long millis()
|
||||
{
|
||||
unsigned long m;
|
||||
uint8_t oldSREG = SREG;
|
||||
|
||||
// disable interrupts while we read timer0_millis or we might get an
|
||||
// inconsistent value (e.g. in the middle of a write to timer0_millis)
|
||||
cli();
|
||||
m = timer0_millis;
|
||||
SREG = oldSREG;
|
||||
|
||||
return m;
|
||||
}
|
||||
|
||||
unsigned long micros() {
|
||||
unsigned long m;
|
||||
uint8_t oldSREG = SREG, t;
|
||||
|
||||
cli();
|
||||
m = timer0_overflow_count;
|
||||
#if defined(TCNT0)
|
||||
t = TCNT0;
|
||||
#elif defined(TCNT0L)
|
||||
t = TCNT0L;
|
||||
#else
|
||||
#error TIMER 0 not defined
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef TIFR0
|
||||
if ((TIFR0 & _BV(TOV0)) && (t < 255))
|
||||
m++;
|
||||
#else
|
||||
if ((TIFR & _BV(TOV0)) && (t < 255))
|
||||
m++;
|
||||
#endif
|
||||
|
||||
SREG = oldSREG;
|
||||
|
||||
return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond());
|
||||
}
|
||||
|
||||
void delay(unsigned long ms)
|
||||
{
|
||||
uint16_t start = (uint16_t)micros();
|
||||
|
||||
while (ms > 0) {
|
||||
if (((uint16_t)micros() - start) >= 1000) {
|
||||
ms--;
|
||||
start += 1000;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */
|
||||
void delayMicroseconds(unsigned int us)
|
||||
{
|
||||
// calling avrlib's delay_us() function with low values (e.g. 1 or
|
||||
// 2 microseconds) gives delays longer than desired.
|
||||
//delay_us(us);
|
||||
#if F_CPU >= 20000000L
|
||||
// for the 20 MHz clock on rare Arduino boards
|
||||
|
||||
// for a one-microsecond delay, simply wait 2 cycle and return. The overhead
|
||||
// of the function call yields a delay of exactly a one microsecond.
|
||||
__asm__ __volatile__ (
|
||||
"nop" "\n\t"
|
||||
"nop"); //just waiting 2 cycle
|
||||
if (--us == 0)
|
||||
return;
|
||||
|
||||
// the following loop takes a 1/5 of a microsecond (4 cycles)
|
||||
// per iteration, so execute it five times for each microsecond of
|
||||
// delay requested.
|
||||
us = (us<<2) + us; // x5 us
|
||||
|
||||
// account for the time taken in the preceeding commands.
|
||||
us -= 2;
|
||||
|
||||
#elif F_CPU >= 16000000L
|
||||
// for the 16 MHz clock on most Arduino boards
|
||||
|
||||
// for a one-microsecond delay, simply return. the overhead
|
||||
// of the function call yields a delay of approximately 1 1/8 us.
|
||||
if (--us == 0)
|
||||
return;
|
||||
|
||||
// the following loop takes a quarter of a microsecond (4 cycles)
|
||||
// per iteration, so execute it four times for each microsecond of
|
||||
// delay requested.
|
||||
us <<= 2;
|
||||
|
||||
// account for the time taken in the preceeding commands.
|
||||
us -= 2;
|
||||
#else
|
||||
// for the 8 MHz internal clock on the ATmega168
|
||||
|
||||
// for a one- or two-microsecond delay, simply return. the overhead of
|
||||
// the function calls takes more than two microseconds. can't just
|
||||
// subtract two, since us is unsigned; we'd overflow.
|
||||
if (--us == 0)
|
||||
return;
|
||||
if (--us == 0)
|
||||
return;
|
||||
|
||||
// the following loop takes half of a microsecond (4 cycles)
|
||||
// per iteration, so execute it twice for each microsecond of
|
||||
// delay requested.
|
||||
us <<= 1;
|
||||
|
||||
// partially compensate for the time taken by the preceeding commands.
|
||||
// we can't subtract any more than this or we'd overflow w/ small delays.
|
||||
us--;
|
||||
#endif
|
||||
|
||||
// busy wait
|
||||
__asm__ __volatile__ (
|
||||
"1: sbiw %0,1" "\n\t" // 2 cycles
|
||||
"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
|
||||
);
|
||||
}
|
||||
|
||||
void init()
|
||||
{
|
||||
// this needs to be called before setup() or some functions won't
|
||||
// work there
|
||||
sei();
|
||||
|
||||
// on the ATmega168, timer 0 is also used for fast hardware pwm
|
||||
// (using phase-correct PWM would mean that timer 0 overflowed half as often
|
||||
// resulting in different millis() behavior on the ATmega8 and ATmega168)
|
||||
#if defined(TCCR0A) && defined(WGM01)
|
||||
sbi(TCCR0A, WGM01);
|
||||
sbi(TCCR0A, WGM00);
|
||||
#endif
|
||||
|
||||
// set timer 0 prescale factor to 64
|
||||
#if defined(__AVR_ATmega128__)
|
||||
// CPU specific: different values for the ATmega128
|
||||
sbi(TCCR0, CS02);
|
||||
#elif defined(TCCR0) && defined(CS01) && defined(CS00)
|
||||
// this combination is for the standard atmega8
|
||||
sbi(TCCR0, CS01);
|
||||
sbi(TCCR0, CS00);
|
||||
#elif defined(TCCR0B) && defined(CS01) && defined(CS00)
|
||||
// this combination is for the standard 168/328/1280/2560
|
||||
sbi(TCCR0B, CS01);
|
||||
sbi(TCCR0B, CS00);
|
||||
#elif defined(TCCR0A) && defined(CS01) && defined(CS00)
|
||||
// this combination is for the __AVR_ATmega645__ series
|
||||
sbi(TCCR0A, CS01);
|
||||
sbi(TCCR0A, CS00);
|
||||
#else
|
||||
#error Timer 0 prescale factor 64 not set correctly
|
||||
#endif
|
||||
|
||||
// enable timer 0 overflow interrupt
|
||||
#if defined(TIMSK) && defined(TOIE0)
|
||||
sbi(TIMSK, TOIE0);
|
||||
#elif defined(TIMSK0) && defined(TOIE0)
|
||||
sbi(TIMSK0, TOIE0);
|
||||
#else
|
||||
#error Timer 0 overflow interrupt not set correctly
|
||||
#endif
|
||||
|
||||
// timers 1 and 2 are used for phase-correct hardware pwm
|
||||
// this is better for motors as it ensures an even waveform
|
||||
// note, however, that fast pwm mode can achieve a frequency of up
|
||||
// 8 MHz (with a 16 MHz clock) at 50% duty cycle
|
||||
|
||||
#if defined(TCCR1B) && defined(CS11) && defined(CS10)
|
||||
TCCR1B = 0;
|
||||
|
||||
// set timer 1 prescale factor to 64
|
||||
sbi(TCCR1B, CS11);
|
||||
#if F_CPU >= 8000000L
|
||||
sbi(TCCR1B, CS10);
|
||||
#endif
|
||||
#elif defined(TCCR1) && defined(CS11) && defined(CS10)
|
||||
sbi(TCCR1, CS11);
|
||||
#if F_CPU >= 8000000L
|
||||
sbi(TCCR1, CS10);
|
||||
#endif
|
||||
#endif
|
||||
// put timer 1 in 8-bit phase correct pwm mode
|
||||
#if defined(TCCR1A) && defined(WGM10)
|
||||
sbi(TCCR1A, WGM10);
|
||||
#elif defined(TCCR1)
|
||||
#warning this needs to be finished
|
||||
#endif
|
||||
|
||||
// set timer 2 prescale factor to 64
|
||||
#if defined(TCCR2) && defined(CS22)
|
||||
sbi(TCCR2, CS22);
|
||||
#elif defined(TCCR2B) && defined(CS22)
|
||||
sbi(TCCR2B, CS22);
|
||||
#else
|
||||
#warning Timer 2 not finished (may not be present on this CPU)
|
||||
#endif
|
||||
|
||||
// configure timer 2 for phase correct pwm (8-bit)
|
||||
#if defined(TCCR2) && defined(WGM20)
|
||||
sbi(TCCR2, WGM20);
|
||||
#elif defined(TCCR2A) && defined(WGM20)
|
||||
sbi(TCCR2A, WGM20);
|
||||
#else
|
||||
#warning Timer 2 not finished (may not be present on this CPU)
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3B) && defined(CS31) && defined(WGM30)
|
||||
sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64
|
||||
sbi(TCCR3B, CS30);
|
||||
sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(TCCR4B) && defined(TCCR4D) /* beginning of timer4 block for 32U4 and similar */
|
||||
sbi(TCCR4B, CS42); // set timer4 prescale factor to 64
|
||||
sbi(TCCR4B, CS41);
|
||||
sbi(TCCR4B, CS40);
|
||||
sbi(TCCR4D, WGM40); // put timer 4 in phase- and frequency-correct PWM mode
|
||||
sbi(TCCR4A, PWM4A); // enable PWM mode for comparator OCR4A
|
||||
sbi(TCCR4C, PWM4D); // enable PWM mode for comparator OCR4D
|
||||
#else /* beginning of timer4 block for ATMEGA1280 and ATMEGA2560 */
|
||||
#if defined(TCCR4B) && defined(CS41) && defined(WGM40)
|
||||
sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64
|
||||
sbi(TCCR4B, CS40);
|
||||
sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode
|
||||
#endif
|
||||
#endif /* end timer4 block for ATMEGA1280/2560 and similar */
|
||||
|
||||
#if defined(TCCR5B) && defined(CS51) && defined(WGM50)
|
||||
sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64
|
||||
sbi(TCCR5B, CS50);
|
||||
sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode
|
||||
#endif
|
||||
|
||||
#if defined(ADCSRA)
|
||||
// set a2d prescale factor to 128
|
||||
// 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
|
||||
// XXX: this will not work properly for other clock speeds, and
|
||||
// this code should use F_CPU to determine the prescale factor.
|
||||
sbi(ADCSRA, ADPS2);
|
||||
sbi(ADCSRA, ADPS1);
|
||||
sbi(ADCSRA, ADPS0);
|
||||
|
||||
// enable a2d conversions
|
||||
sbi(ADCSRA, ADEN);
|
||||
#endif
|
||||
|
||||
// the bootloader connects pins 0 and 1 to the USART; disconnect them
|
||||
// here so they can be used as normal digital i/o; they will be
|
||||
// reconnected in Serial.begin()
|
||||
#if defined(UCSRB)
|
||||
UCSRB = 0;
|
||||
#elif defined(UCSR0B)
|
||||
UCSR0B = 0;
|
||||
#endif
|
||||
}
|
||||
291
platform/osd-merkur/dev/wiring_analog.c
Normal file
291
platform/osd-merkur/dev/wiring_analog.c
Normal file
|
|
@ -0,0 +1,291 @@
|
|||
/*
|
||||
wiring_analog.c - analog input and output
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
Modified 28 September 2010 by Mark Sproul
|
||||
|
||||
$Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
|
||||
*/
|
||||
|
||||
#include "wiring_private.h"
|
||||
#include "pins_arduino.h"
|
||||
|
||||
uint8_t analog_reference = DEFAULT;
|
||||
|
||||
void analogReference(uint8_t mode)
|
||||
{
|
||||
// can't actually set the register here because the default setting
|
||||
// will connect AVCC and the AREF pin, which would cause a short if
|
||||
// there's something connected to AREF.
|
||||
analog_reference = mode;
|
||||
}
|
||||
|
||||
int analogRead(uint8_t pin)
|
||||
{
|
||||
uint8_t low, high;
|
||||
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
if (pin >= 54) pin -= 54; // allow for channel or pin numbers
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
if (pin >= 18) pin -= 18; // allow for channel or pin numbers
|
||||
#elif defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__)
|
||||
if (pin >= 24) pin -= 24; // allow for channel or pin numbers
|
||||
#elif defined(__AVR_ATmega128RFA1__)
|
||||
if (pin >= 26) pin -= 26; // allow for channel or pin numbers
|
||||
#else
|
||||
if (pin >= 14) pin -= 14; // allow for channel or pin numbers
|
||||
#endif
|
||||
|
||||
#if defined(__AVR_ATmega32U4__)
|
||||
pin = analogPinToChannel(pin);
|
||||
ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
|
||||
#elif defined(ADCSRB) && defined(MUX5)
|
||||
// the MUX5 bit of ADCSRB selects whether we're reading from channels
|
||||
// 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high).
|
||||
ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
|
||||
#endif
|
||||
// set the analog reference (high two bits of ADMUX) and select the
|
||||
// channel (low 4 bits). this also sets ADLAR (left-adjust result)
|
||||
// to 0 (the default).
|
||||
#if defined(ADMUX)
|
||||
ADMUX = (analog_reference << 6) | (pin & 0x07);
|
||||
#endif
|
||||
|
||||
// without a delay, we seem to read from the wrong channel
|
||||
//delay(1);
|
||||
|
||||
#if defined(ADCSRA) && defined(ADCL)
|
||||
// start the conversion
|
||||
sbi(ADCSRA, ADSC);
|
||||
|
||||
// ADSC is cleared when the conversion finishes
|
||||
while (bit_is_set(ADCSRA, ADSC));
|
||||
|
||||
// we have to read ADCL first; doing so locks both ADCL
|
||||
// and ADCH until ADCH is read. reading ADCL second would
|
||||
// cause the results of each conversion to be discarded,
|
||||
// as ADCL and ADCH would be locked when it completed.
|
||||
low = ADCL;
|
||||
high = ADCH;
|
||||
#else
|
||||
// we dont have an ADC, return 0
|
||||
low = 0;
|
||||
high = 0;
|
||||
#endif
|
||||
|
||||
// combine the two bytes
|
||||
return (high << 8) | low;
|
||||
}
|
||||
|
||||
// Right now, PWM output only works on the pins with
|
||||
// hardware support. These are defined in the appropriate
|
||||
// pins_*.c file. For the rest of the pins, we default
|
||||
// to digital output.
|
||||
void analogWrite(uint8_t pin, int val)
|
||||
{
|
||||
// We need to make sure the PWM output is enabled for those pins
|
||||
// that support it, as we turn it off when digitally reading or
|
||||
// writing with them. Also, make sure the pin is in output mode
|
||||
// for consistenty with Wiring, which doesn't require a pinMode
|
||||
// call for the analog output pins.
|
||||
pinMode(pin, OUTPUT);
|
||||
if (val == 0)
|
||||
{
|
||||
digitalWrite(pin, LOW);
|
||||
}
|
||||
else if (val == 255)
|
||||
{
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
else
|
||||
{
|
||||
switch(digitalPinToTimer(pin))
|
||||
{
|
||||
// XXX fix needed for atmega8
|
||||
#if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__)
|
||||
case TIMER0A:
|
||||
// connect pwm to pin on timer 0
|
||||
sbi(TCCR0, COM00);
|
||||
OCR0 = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR0A) && defined(COM0A1)
|
||||
case TIMER0A:
|
||||
// connect pwm to pin on timer 0, channel A
|
||||
sbi(TCCR0A, COM0A1);
|
||||
OCR0A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR0A) && defined(COM0B1)
|
||||
case TIMER0B:
|
||||
// connect pwm to pin on timer 0, channel B
|
||||
sbi(TCCR0A, COM0B1);
|
||||
OCR0B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR1A) && defined(COM1A1)
|
||||
case TIMER1A:
|
||||
// connect pwm to pin on timer 1, channel A
|
||||
sbi(TCCR1A, COM1A1);
|
||||
OCR1A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR1A) && defined(COM1B1)
|
||||
case TIMER1B:
|
||||
// connect pwm to pin on timer 1, channel B
|
||||
sbi(TCCR1A, COM1B1);
|
||||
OCR1B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR1A) && defined(COM1C1)
|
||||
case TIMER1C:
|
||||
// connect pwm to pin on timer 1, channel C
|
||||
sbi(TCCR1A, COM1C1);
|
||||
OCR1C = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2) && defined(COM21)
|
||||
case TIMER2:
|
||||
// connect pwm to pin on timer 2
|
||||
sbi(TCCR2, COM21);
|
||||
OCR2 = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2A) && defined(COM2A1)
|
||||
case TIMER2A:
|
||||
// connect pwm to pin on timer 2, channel A
|
||||
sbi(TCCR2A, COM2A1);
|
||||
OCR2A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2A) && defined(COM2B1)
|
||||
case TIMER2B:
|
||||
// connect pwm to pin on timer 2, channel B
|
||||
sbi(TCCR2A, COM2B1);
|
||||
OCR2B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(COM3A1)
|
||||
case TIMER3A:
|
||||
// connect pwm to pin on timer 3, channel A
|
||||
sbi(TCCR3A, COM3A1);
|
||||
OCR3A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(COM3B1)
|
||||
case TIMER3B:
|
||||
// connect pwm to pin on timer 3, channel B
|
||||
sbi(TCCR3A, COM3B1);
|
||||
OCR3B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(COM3C1)
|
||||
case TIMER3C:
|
||||
// connect pwm to pin on timer 3, channel C
|
||||
sbi(TCCR3A, COM3C1);
|
||||
OCR3C = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A)
|
||||
case TIMER4A:
|
||||
//connect pwm to pin on timer 4, channel A
|
||||
sbi(TCCR4A, COM4A1);
|
||||
#if defined(COM4A0) // only used on 32U4
|
||||
cbi(TCCR4A, COM4A0);
|
||||
#endif
|
||||
OCR4A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(COM4B1)
|
||||
case TIMER4B:
|
||||
// connect pwm to pin on timer 4, channel B
|
||||
sbi(TCCR4A, COM4B1);
|
||||
OCR4B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(COM4C1)
|
||||
case TIMER4C:
|
||||
// connect pwm to pin on timer 4, channel C
|
||||
sbi(TCCR4A, COM4C1);
|
||||
OCR4C = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4C) && defined(COM4D1)
|
||||
case TIMER4D:
|
||||
// connect pwm to pin on timer 4, channel D
|
||||
sbi(TCCR4C, COM4D1);
|
||||
#if defined(COM4D0) // only used on 32U4
|
||||
cbi(TCCR4C, COM4D0);
|
||||
#endif
|
||||
OCR4D = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(TCCR5A) && defined(COM5A1)
|
||||
case TIMER5A:
|
||||
// connect pwm to pin on timer 5, channel A
|
||||
sbi(TCCR5A, COM5A1);
|
||||
OCR5A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR5A) && defined(COM5B1)
|
||||
case TIMER5B:
|
||||
// connect pwm to pin on timer 5, channel B
|
||||
sbi(TCCR5A, COM5B1);
|
||||
OCR5B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR5A) && defined(COM5C1)
|
||||
case TIMER5C:
|
||||
// connect pwm to pin on timer 5, channel C
|
||||
sbi(TCCR5A, COM5C1);
|
||||
OCR5C = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
case NOT_ON_TIMER:
|
||||
default:
|
||||
if (val < 128) {
|
||||
digitalWrite(pin, LOW);
|
||||
} else {
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
181
platform/osd-merkur/dev/wiring_digital.c
Normal file
181
platform/osd-merkur/dev/wiring_digital.c
Normal file
|
|
@ -0,0 +1,181 @@
|
|||
/*
|
||||
wiring_digital.c - digital input and output functions
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
Modified 28 September 2010 by Mark Sproul
|
||||
|
||||
$Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
|
||||
*/
|
||||
|
||||
#define ARDUINO_MAIN
|
||||
#include "wiring_private.h"
|
||||
#include "pins_arduino.h"
|
||||
|
||||
void pinMode(uint8_t pin, uint8_t mode)
|
||||
{
|
||||
uint8_t bit = digitalPinToBitMask(pin);
|
||||
uint8_t port = digitalPinToPort(pin);
|
||||
volatile uint8_t *reg, *out;
|
||||
|
||||
if (port == NOT_A_PIN) return;
|
||||
|
||||
// JWS: can I let the optimizer do this?
|
||||
reg = portModeRegister(port);
|
||||
out = portOutputRegister(port);
|
||||
|
||||
if (mode == INPUT) {
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
*reg &= ~bit;
|
||||
*out &= ~bit;
|
||||
SREG = oldSREG;
|
||||
} else if (mode == INPUT_PULLUP) {
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
*reg &= ~bit;
|
||||
*out |= bit;
|
||||
SREG = oldSREG;
|
||||
} else {
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
*reg |= bit;
|
||||
SREG = oldSREG;
|
||||
}
|
||||
}
|
||||
|
||||
// Forcing this inline keeps the callers from having to push their own stuff
|
||||
// on the stack. It is a good performance win and only takes 1 more byte per
|
||||
// user than calling. (It will take more bytes on the 168.)
|
||||
//
|
||||
// But shouldn't this be moved into pinMode? Seems silly to check and do on
|
||||
// each digitalread or write.
|
||||
//
|
||||
// Mark Sproul:
|
||||
// - Removed inline. Save 170 bytes on atmega1280
|
||||
// - changed to a switch statment; added 32 bytes but much easier to read and maintain.
|
||||
// - Added more #ifdefs, now compiles for atmega645
|
||||
//
|
||||
//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline));
|
||||
//static inline void turnOffPWM(uint8_t timer)
|
||||
static void turnOffPWM(uint8_t timer)
|
||||
{
|
||||
switch (timer)
|
||||
{
|
||||
#if defined(TCCR1A) && defined(COM1A1)
|
||||
case TIMER1A: cbi(TCCR1A, COM1A1); break;
|
||||
#endif
|
||||
#if defined(TCCR1A) && defined(COM1B1)
|
||||
case TIMER1B: cbi(TCCR1A, COM1B1); break;
|
||||
#endif
|
||||
#if defined(TCCR1A) && defined(COM1B1)
|
||||
case TIMER1C: cbi(TCCR1A, COM1C1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2) && defined(COM21)
|
||||
case TIMER2: cbi(TCCR2, COM21); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR0A) && defined(COM0A1)
|
||||
case TIMER0A: cbi(TCCR0A, COM0A1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TIMER0B) && defined(COM0B1)
|
||||
case TIMER0B: cbi(TCCR0A, COM0B1); break;
|
||||
#endif
|
||||
#if defined(TCCR2A) && defined(COM2A1)
|
||||
case TIMER2A: cbi(TCCR2A, COM2A1); break;
|
||||
#endif
|
||||
#if defined(TCCR2A) && defined(COM2B1)
|
||||
case TIMER2B: cbi(TCCR2A, COM2B1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(COM3A1)
|
||||
case TIMER3A: cbi(TCCR3A, COM3A1); break;
|
||||
#endif
|
||||
#if defined(TCCR3A) && defined(COM3B1)
|
||||
case TIMER3B: cbi(TCCR3A, COM3B1); break;
|
||||
#endif
|
||||
#if defined(TCCR3A) && defined(COM3C1)
|
||||
case TIMER3C: cbi(TCCR3A, COM3C1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(COM4A1)
|
||||
case TIMER4A: cbi(TCCR4A, COM4A1); break;
|
||||
#endif
|
||||
#if defined(TCCR4A) && defined(COM4B1)
|
||||
case TIMER4B: cbi(TCCR4A, COM4B1); break;
|
||||
#endif
|
||||
#if defined(TCCR4A) && defined(COM4C1)
|
||||
case TIMER4C: cbi(TCCR4A, COM4C1); break;
|
||||
#endif
|
||||
#if defined(TCCR4C) && defined(COM4D1)
|
||||
case TIMER4D: cbi(TCCR4C, COM4D1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR5A)
|
||||
case TIMER5A: cbi(TCCR5A, COM5A1); break;
|
||||
case TIMER5B: cbi(TCCR5A, COM5B1); break;
|
||||
case TIMER5C: cbi(TCCR5A, COM5C1); break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
void digitalWrite(uint8_t pin, uint8_t val)
|
||||
{
|
||||
uint8_t timer = digitalPinToTimer(pin);
|
||||
uint8_t bit = digitalPinToBitMask(pin);
|
||||
uint8_t port = digitalPinToPort(pin);
|
||||
volatile uint8_t *out;
|
||||
|
||||
if (port == NOT_A_PIN) return;
|
||||
|
||||
// If the pin that support PWM output, we need to turn it off
|
||||
// before doing a digital write.
|
||||
if (timer != NOT_ON_TIMER) turnOffPWM(timer);
|
||||
|
||||
out = portOutputRegister(port);
|
||||
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
|
||||
if (val == LOW) {
|
||||
*out &= ~bit;
|
||||
} else {
|
||||
*out |= bit;
|
||||
}
|
||||
|
||||
SREG = oldSREG;
|
||||
}
|
||||
|
||||
int digitalRead(uint8_t pin)
|
||||
{
|
||||
uint8_t timer = digitalPinToTimer(pin);
|
||||
uint8_t bit = digitalPinToBitMask(pin);
|
||||
uint8_t port = digitalPinToPort(pin);
|
||||
|
||||
if (port == NOT_A_PIN) return LOW;
|
||||
|
||||
// If the pin that support PWM output, we need to turn it off
|
||||
// before getting a digital reading.
|
||||
if (timer != NOT_ON_TIMER) turnOffPWM(timer);
|
||||
|
||||
if (*portInputRegister(port) & bit) return HIGH;
|
||||
return LOW;
|
||||
}
|
||||
69
platform/osd-merkur/dev/wiring_private.h
Normal file
69
platform/osd-merkur/dev/wiring_private.h
Normal file
|
|
@ -0,0 +1,69 @@
|
|||
/*
|
||||
wiring_private.h - Internal header file.
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id: wiring.h 239 2007-01-12 17:58:39Z mellis $
|
||||
*/
|
||||
|
||||
#ifndef WiringPrivate_h
|
||||
#define WiringPrivate_h
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <stdio.h>
|
||||
#include <stdarg.h>
|
||||
|
||||
#include "Arduino.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"{
|
||||
#endif
|
||||
|
||||
#ifndef cbi
|
||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
#endif
|
||||
#ifndef sbi
|
||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#endif
|
||||
|
||||
#define EXTERNAL_INT_0 0
|
||||
#define EXTERNAL_INT_1 1
|
||||
#define EXTERNAL_INT_2 2
|
||||
#define EXTERNAL_INT_3 3
|
||||
#define EXTERNAL_INT_4 4
|
||||
#define EXTERNAL_INT_5 5
|
||||
#define EXTERNAL_INT_6 6
|
||||
#define EXTERNAL_INT_7 7
|
||||
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
#define EXTERNAL_NUM_INTERRUPTS 8
|
||||
#elif defined(__AVR_ATmega128RFA1__)
|
||||
#define EXTERNAL_NUM_INTERRUPTS 8
|
||||
#else
|
||||
#define EXTERNAL_NUM_INTERRUPTS 2
|
||||
#endif
|
||||
|
||||
typedef void (*voidFuncPtr)(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
Loading…
Reference in a new issue