Add SensorTag CC2650 files
This commit is contained in:
Jonas Olsson
parent
c7d85c3ea5
commit
b385933fa8
30 changed files with 5024 additions and 0 deletions
8
platform/srf06-cc26xx/sensortag/Makefile.sensortag
Normal file
8
platform/srf06-cc26xx/sensortag/Makefile.sensortag
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
CFLAGS += -DBOARD_SENSORTAG=1 -DTI_BSP_BOARD_HDR=\"ti-bsp-st.h\"
|
||||
CFLAGS += -DBACKDOOR_IOID=0x00000000
|
||||
|
||||
BOARD_SOURCEFILES += leds-arch.c sensortag-sensors.c sensor-common.c
|
||||
BOARD_SOURCEFILES += bmp-280-sensor.c tmp-007-sensor.c opt-3001-sensor.c
|
||||
BOARD_SOURCEFILES += sht-21-sensor.c mpu-9250-sensor.c button-sensor.c
|
||||
BOARD_SOURCEFILES += reed-relay.c ext-flash.c buzzer.c
|
||||
BOARD_SOURCEFILES += board.c board-spi.c board-i2c.c
|
||||
391
platform/srf06-cc26xx/sensortag/bmp-280-sensor.c
Normal file
391
platform/srf06-cc26xx/sensortag/bmp-280-sensor.c
Normal file
|
|
@ -0,0 +1,391 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-bmp-sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26XX BMP280 Altimeter / Pressure Sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "bmp-280-sensor.h"
|
||||
#include "sys/ctimer.h"
|
||||
#include "sensor-common.h"
|
||||
#include "board-i2c.h"
|
||||
#include "ti-lib.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define BMP280_I2C_ADDRESS 0x77
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Registers */
|
||||
#define ADDR_CALIB 0x88
|
||||
#define ADDR_PROD_ID 0xD0
|
||||
#define ADDR_RESET 0xE0
|
||||
#define ADDR_STATUS 0xF3
|
||||
#define ADDR_CTRL_MEAS 0xF4
|
||||
#define ADDR_CONFIG 0xF5
|
||||
#define ADDR_PRESS_MSB 0xF7
|
||||
#define ADDR_PRESS_LSB 0xF8
|
||||
#define ADDR_PRESS_XLSB 0xF9
|
||||
#define ADDR_TEMP_MSB 0xFA
|
||||
#define ADDR_TEMP_LSB 0xFB
|
||||
#define ADDR_TEMP_XLSB 0xFC
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Reset values */
|
||||
#define VAL_PROD_ID 0x58
|
||||
#define VAL_RESET 0x00
|
||||
#define VAL_STATUS 0x00
|
||||
#define VAL_CTRL_MEAS 0x00
|
||||
#define VAL_CONFIG 0x00
|
||||
#define VAL_PRESS_MSB 0x80
|
||||
#define VAL_PRESS_LSB 0x00
|
||||
#define VAL_TEMP_MSB 0x80
|
||||
#define VAL_TEMP_LSB 0x00
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Test values */
|
||||
#define VAL_RESET_EXECUTE 0xB6
|
||||
#define VAL_CTRL_MEAS_TEST 0x55
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Misc. */
|
||||
#define MEAS_DATA_SIZE 6
|
||||
#define CALIB_DATA_SIZE 24
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define RES_OFF 0
|
||||
#define RES_ULTRA_LOW_POWER 1
|
||||
#define RES_LOW_POWER 2
|
||||
#define RES_STANDARD 3
|
||||
#define RES_HIGH 5
|
||||
#define RES_ULTRA_HIGH 6
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Bit fields in CTRL_MEAS register */
|
||||
#define PM_OFF 0
|
||||
#define PM_FORCED 1
|
||||
#define PM_NORMAL 3
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define OSRST(v) ((v) << 5)
|
||||
#define OSRSP(v) ((v) << 2)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
typedef struct bmp_280_calibration {
|
||||
uint16_t dig_t1;
|
||||
int16_t dig_t2;
|
||||
int16_t dig_t3;
|
||||
uint16_t dig_p1;
|
||||
int16_t dig_p2;
|
||||
int16_t dig_p3;
|
||||
int16_t dig_p4;
|
||||
int16_t dig_p5;
|
||||
int16_t dig_p6;
|
||||
int16_t dig_p7;
|
||||
int16_t dig_p8;
|
||||
int16_t dig_p9;
|
||||
int32_t t_fine;
|
||||
} bmp_280_calibration_t;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static uint8_t calibration_data[CALIB_DATA_SIZE];
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define SENSOR_STATUS_DISABLED 0
|
||||
#define SENSOR_STATUS_INITIALISED 1
|
||||
#define SENSOR_STATUS_NOT_READY 2
|
||||
#define SENSOR_STATUS_READY 3
|
||||
|
||||
static int enabled = SENSOR_STATUS_DISABLED;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* A buffer for the raw reading from the sensor */
|
||||
#define SENSOR_DATA_BUF_SIZE 6
|
||||
|
||||
static uint8_t sensor_value[SENSOR_DATA_BUF_SIZE];
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Wait SENSOR_STARTUP_DELAY clock ticks for the sensor to be ready - ~80ms */
|
||||
#define SENSOR_STARTUP_DELAY 11
|
||||
|
||||
static struct ctimer startup_timer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
notify_ready(void *not_used)
|
||||
{
|
||||
enabled = SENSOR_STATUS_READY;
|
||||
sensors_changed(&bmp_280_sensor);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
select(void)
|
||||
{
|
||||
/* Set up I2C */
|
||||
board_i2c_select(BOARD_I2C_INTERFACE_0, BMP280_I2C_ADDRESS);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initalise the sensor
|
||||
*/
|
||||
static void
|
||||
init(void)
|
||||
{
|
||||
uint8_t val;
|
||||
|
||||
select();
|
||||
|
||||
/* Read and store calibration data */
|
||||
sensor_common_read_reg(ADDR_CALIB, calibration_data, CALIB_DATA_SIZE);
|
||||
|
||||
/* Reset the sensor */
|
||||
val = VAL_RESET_EXECUTE;
|
||||
sensor_common_write_reg(ADDR_RESET, &val, sizeof(val));
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Enable/disable measurements
|
||||
* \param enable 0: disable, enable otherwise
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
static void
|
||||
enable_sensor(bool enable)
|
||||
{
|
||||
uint8_t val;
|
||||
|
||||
select();
|
||||
|
||||
if(enable) {
|
||||
/* Enable forced mode */
|
||||
val = PM_NORMAL | OSRSP(1) | OSRST(1);
|
||||
} else {
|
||||
val = PM_OFF;
|
||||
}
|
||||
sensor_common_write_reg(ADDR_CTRL_MEAS, &val, sizeof(val));
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Read temperature and pressure data
|
||||
* \param data Pointer to a buffer where temperature and pressure will be
|
||||
* written (6 bytes)
|
||||
* \return True if valid data could be retrieved
|
||||
*/
|
||||
static bool
|
||||
read_data(uint8_t *data)
|
||||
{
|
||||
bool success;
|
||||
|
||||
select();
|
||||
|
||||
success = sensor_common_read_reg(ADDR_PRESS_MSB, data, MEAS_DATA_SIZE);
|
||||
if(!success) {
|
||||
sensor_common_set_error_data(data, MEAS_DATA_SIZE);
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Convert raw data to values in degrees C (temp) and Pascal (pressure)
|
||||
* \param data Pointer to a buffer that holds raw sensor data
|
||||
* \param temp Pointer to a variable where the converted temperature will be
|
||||
* written
|
||||
* \param press Pointer to a variable where the converted pressure will be
|
||||
* written
|
||||
*/
|
||||
static void
|
||||
convert(uint8_t *data, int32_t *temp, uint32_t *press)
|
||||
{
|
||||
int32_t utemp, upress;
|
||||
bmp_280_calibration_t *p = (bmp_280_calibration_t *)calibration_data;
|
||||
int32_t v_x1_u32r;
|
||||
int32_t v_x2_u32r;
|
||||
int32_t temperature;
|
||||
uint32_t pressure;
|
||||
|
||||
/* Pressure */
|
||||
upress = (int32_t)((((uint32_t)(data[0])) << 12)
|
||||
| (((uint32_t)(data[1])) << 4) | ((uint32_t)data[2] >> 4));
|
||||
|
||||
/* Temperature */
|
||||
utemp = (int32_t)((((uint32_t)(data[3])) << 12) | (((uint32_t)(data[4])) << 4)
|
||||
| ((uint32_t)data[5] >> 4));
|
||||
|
||||
/* Compensate temperature */
|
||||
v_x1_u32r = ((((utemp >> 3) - ((int32_t)p->dig_t1 << 1)))
|
||||
* ((int32_t)p->dig_t2)) >> 11;
|
||||
v_x2_u32r = (((((utemp >> 4) - ((int32_t)p->dig_t1))
|
||||
* ((utemp >> 4) - ((int32_t)p->dig_t1))) >> 12)
|
||||
* ((int32_t)p->dig_t3))
|
||||
>> 14;
|
||||
p->t_fine = v_x1_u32r + v_x2_u32r;
|
||||
temperature = (p->t_fine * 5 + 128) >> 8;
|
||||
*temp = temperature;
|
||||
|
||||
/* Compensate pressure */
|
||||
v_x1_u32r = (((int32_t)p->t_fine) >> 1) - (int32_t)64000;
|
||||
v_x2_u32r = (((v_x1_u32r >> 2) * (v_x1_u32r >> 2)) >> 11)
|
||||
* ((int32_t)p->dig_p6);
|
||||
v_x2_u32r = v_x2_u32r + ((v_x1_u32r * ((int32_t)p->dig_p5)) << 1);
|
||||
v_x2_u32r = (v_x2_u32r >> 2) + (((int32_t)p->dig_p4) << 16);
|
||||
v_x1_u32r =
|
||||
(((p->dig_p3 * (((v_x1_u32r >> 2) * (v_x1_u32r >> 2)) >> 13)) >> 3)
|
||||
+ ((((int32_t)p->dig_p2) * v_x1_u32r) >> 1)) >> 18;
|
||||
v_x1_u32r = ((((32768 + v_x1_u32r)) * ((int32_t)p->dig_p1)) >> 15);
|
||||
|
||||
if(v_x1_u32r == 0) {
|
||||
return; /* Avoid exception caused by division by zero */
|
||||
}
|
||||
|
||||
pressure = (((uint32_t)(((int32_t)1048576) - upress) - (v_x2_u32r >> 12)))
|
||||
* 3125;
|
||||
if(pressure < 0x80000000) {
|
||||
pressure = (pressure << 1) / ((uint32_t)v_x1_u32r);
|
||||
} else {
|
||||
pressure = (pressure / (uint32_t)v_x1_u32r) * 2;
|
||||
}
|
||||
|
||||
v_x1_u32r = (((int32_t)p->dig_p9)
|
||||
* ((int32_t)(((pressure >> 3) * (pressure >> 3)) >> 13))) >> 12;
|
||||
v_x2_u32r = (((int32_t)(pressure >> 2)) * ((int32_t)p->dig_p8)) >> 13;
|
||||
pressure = (uint32_t)((int32_t)pressure
|
||||
+ ((v_x1_u32r + v_x2_u32r + p->dig_p7) >> 4));
|
||||
|
||||
*press = pressure;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns a reading from the sensor
|
||||
* \param BMP_280_SENSOR_TYPE_TEMP or BMP_280_SENSOR_TYPE_PRESS
|
||||
* \return Temperature (centi degrees C) or Pressure (Pascal).
|
||||
*/
|
||||
static int
|
||||
value(int type)
|
||||
{
|
||||
int rv;
|
||||
int32_t temp = 0;
|
||||
uint32_t pres = 0;
|
||||
|
||||
if(enabled != SENSOR_STATUS_READY) {
|
||||
PRINTF("Sensor disabled or starting up (%d)\n", enabled);
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
if((type != BMP_280_SENSOR_TYPE_TEMP) && type != BMP_280_SENSOR_TYPE_PRESS) {
|
||||
PRINTF("Invalid type\n");
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
} else {
|
||||
memset(sensor_value, 0, SENSOR_DATA_BUF_SIZE);
|
||||
|
||||
rv = read_data(sensor_value);
|
||||
|
||||
if(rv == 0) {
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
PRINTF("val: %02x%02x%02x %02x%02x%02x\n",
|
||||
sensor_value[0], sensor_value[1], sensor_value[2],
|
||||
sensor_value[3], sensor_value[4], sensor_value[5]);
|
||||
|
||||
convert(sensor_value, &temp, &pres);
|
||||
|
||||
if(type == BMP_280_SENSOR_TYPE_TEMP) {
|
||||
rv = (int)temp;
|
||||
} else if(type == BMP_280_SENSOR_TYPE_PRESS) {
|
||||
rv = (int)pres;
|
||||
}
|
||||
}
|
||||
return rv;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the BMP280 sensor.
|
||||
*
|
||||
* \param type Activate, enable or disable the sensor. See below
|
||||
* \param enable
|
||||
*
|
||||
* When type == SENSORS_HW_INIT we turn on the hardware
|
||||
* When type == SENSORS_ACTIVE and enable==1 we enable the sensor
|
||||
* When type == SENSORS_ACTIVE and enable==0 we disable the sensor
|
||||
*/
|
||||
static int
|
||||
configure(int type, int enable)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_HW_INIT:
|
||||
enabled = SENSOR_STATUS_INITIALISED;
|
||||
init();
|
||||
break;
|
||||
case SENSORS_ACTIVE:
|
||||
/* Must be initialised first */
|
||||
if(enabled == SENSOR_STATUS_DISABLED) {
|
||||
return SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
if(enable) {
|
||||
enable_sensor(1);
|
||||
ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, notify_ready, NULL);
|
||||
enabled = SENSOR_STATUS_NOT_READY;
|
||||
} else {
|
||||
ctimer_stop(&startup_timer);
|
||||
enable_sensor(0);
|
||||
enabled = SENSOR_STATUS_INITIALISED;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return enabled;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns the status of the sensor
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return 1 if the sensor is enabled
|
||||
*/
|
||||
static int
|
||||
status(int type)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_ACTIVE:
|
||||
case SENSORS_READY:
|
||||
return enabled;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(bmp_280_sensor, "BMP280", value, configure, status);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
70
platform/srf06-cc26xx/sensortag/bmp-280-sensor.h
Normal file
70
platform/srf06-cc26xx/sensortag/bmp-280-sensor.h
Normal file
|
|
@ -0,0 +1,70 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-bmp-sensor SensorTag 2.0 Pressure Sensor
|
||||
*
|
||||
* Due to the time required for the sensor to startup, this driver is meant to
|
||||
* be used in an asynchronous fashion. The caller must first activate the
|
||||
* sensor by calling SENSORS_ACTIVATE(). This will trigger the sensor's startup
|
||||
* sequence, but the call will not wait for it to complete so that the CPU can
|
||||
* perform other tasks or drop to a low power mode.
|
||||
*
|
||||
* Once the sensor is stable, the driver will generate a sensors_changed event.
|
||||
*
|
||||
* Once a reading has been taken, the caller has two options:
|
||||
* - Turn the sensor off by calling SENSORS_DEACTIVATE, but in order to take
|
||||
* subsequent readings SENSORS_ACTIVATE must be called again
|
||||
* - Leave the sensor on. In this scenario, the caller can simply keep calling
|
||||
* value() for subsequent readings, but having the sensor on will consume
|
||||
* energy
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx BMP280 Altimeter / Pressure Sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef BMP_280_SENSOR_H_
|
||||
#define BMP_280_SENSOR_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define BMP_280_SENSOR_TYPE_TEMP 1
|
||||
#define BMP_280_SENSOR_TYPE_PRESS 2
|
||||
/*---------------------------------------------------------------------------*/
|
||||
extern const struct sensors_sensor bmp_280_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* BMP_280_SENSOR_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
269
platform/srf06-cc26xx/sensortag/board-i2c.c
Normal file
269
platform/srf06-cc26xx/sensortag/board-i2c.c
Normal file
|
|
@ -0,0 +1,269 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-i2c
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Board-specific I2C driver for the Sensortag-CC26xx
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "ti-lib.h"
|
||||
#include "board-i2c.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static uint8_t slave_addr = 0x00;
|
||||
static uint8_t interface = 0xFF;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static bool
|
||||
i2c_status()
|
||||
{
|
||||
uint32_t status;
|
||||
|
||||
status = ti_lib_i2c_master_err(I2C0_BASE);
|
||||
if(status & (I2C_MSTAT_DATACK_N_M | I2C_MSTAT_ADRACK_N_M)) {
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_ERROR_STOP);
|
||||
}
|
||||
|
||||
return status == I2C_MASTER_ERR_NONE;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
board_i2c_init()
|
||||
{
|
||||
/* The I2C peripheral must be enabled */
|
||||
ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_I2C0);
|
||||
ti_lib_prcm_load_set();
|
||||
while(!ti_lib_prcm_load_get());
|
||||
|
||||
/* Reset the I2C controller */
|
||||
HWREG(PRCM_BASE + PRCM_O_RESETI2C) = PRCM_RESETI2C_I2C;
|
||||
|
||||
/* Enable and initialize the I2C master module */
|
||||
ti_lib_i2c_master_init_exp_clk(I2C0_BASE,
|
||||
ti_lib_sys_ctrl_peripheral_clock_get(
|
||||
PRCM_PERIPH_I2C0, SYSCTRL_SYSBUS_ON),
|
||||
true);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
board_i2c_write(uint8_t *data, uint8_t len)
|
||||
{
|
||||
uint32_t i;
|
||||
bool success;
|
||||
|
||||
/* Write slave address */
|
||||
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
|
||||
|
||||
/* Write first byte */
|
||||
ti_lib_i2c_master_data_put(I2C0_BASE, data[0]);
|
||||
|
||||
/* Check if another master has access */
|
||||
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
||||
|
||||
/* Assert RUN + START */
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_START);
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
|
||||
for(i = 1; i < len && success; i++) {
|
||||
/* Write next byte */
|
||||
ti_lib_i2c_master_data_put(I2C0_BASE, data[i]);
|
||||
if(i < len - 1) {
|
||||
/* Clear START */
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_CONT);
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
}
|
||||
}
|
||||
|
||||
/* Assert stop */
|
||||
if(success) {
|
||||
/* Assert STOP */
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_FINISH);
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
board_i2c_write_single(uint8_t data)
|
||||
{
|
||||
bool success;
|
||||
|
||||
/* Write slave address */
|
||||
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
|
||||
|
||||
/* Write first byte */
|
||||
ti_lib_i2c_master_data_put(I2C0_BASE, data);
|
||||
|
||||
/* Check if another master has access */
|
||||
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
||||
|
||||
/* Assert RUN + START + STOP */
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_SINGLE_SEND);
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
board_i2c_read(uint8_t *data, uint8_t len)
|
||||
{
|
||||
uint8_t i;
|
||||
bool success;
|
||||
|
||||
/* Set slave address */
|
||||
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, true);
|
||||
|
||||
/* Check if another master has access */
|
||||
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
||||
|
||||
/* Assert RUN + START + ACK */
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_START);
|
||||
|
||||
i = 0;
|
||||
success = true;
|
||||
while(i < (len - 1) && success) {
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
if(success) {
|
||||
data[i] = ti_lib_i2c_master_data_get(I2C0_BASE);
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
|
||||
i++;
|
||||
}
|
||||
}
|
||||
|
||||
if(success) {
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
if(success) {
|
||||
data[len - 1] = ti_lib_i2c_master_data_get(I2C0_BASE);
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);
|
||||
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
||||
}
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
board_i2c_write_read(uint8_t *wdata, uint8_t wlen, uint8_t *rdata, uint8_t rlen)
|
||||
{
|
||||
uint32_t i;
|
||||
bool success;
|
||||
|
||||
/* Set slave address for write */
|
||||
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
|
||||
|
||||
/* Write first byte */
|
||||
ti_lib_i2c_master_data_put(I2C0_BASE, wdata[0]);
|
||||
|
||||
/* Check if another master has access */
|
||||
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
||||
|
||||
/* Assert RUN + START */
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_START);
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
|
||||
for(i = 1; i < wlen && success; i++) {
|
||||
/* Write next byte */
|
||||
ti_lib_i2c_master_data_put(I2C0_BASE, wdata[i]);
|
||||
if(i < wlen - 1) {
|
||||
/* Clear START */
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_CONT);
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
}
|
||||
}
|
||||
if(!success) {
|
||||
return false;
|
||||
}
|
||||
|
||||
/* Set slave address for read */
|
||||
ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, true);
|
||||
|
||||
/* Assert ACK */
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_START);
|
||||
|
||||
i = 0;
|
||||
while(i < (rlen - 1) && success) {
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
if(success) {
|
||||
rdata[i] = ti_lib_i2c_master_data_get(I2C0_BASE);
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
|
||||
i++;
|
||||
}
|
||||
}
|
||||
|
||||
if(success) {
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
success = i2c_status();
|
||||
if(success) {
|
||||
rdata[rlen - 1] = ti_lib_i2c_master_data_get(I2C0_BASE);
|
||||
ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);
|
||||
while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
|
||||
}
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
board_i2c_select(uint8_t new_interface, uint8_t address)
|
||||
{
|
||||
slave_addr = address;
|
||||
|
||||
if(new_interface != interface) {
|
||||
interface = new_interface;
|
||||
if(interface == BOARD_I2C_INTERFACE_0) {
|
||||
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SDA, IOC_NO_IOPULL);
|
||||
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SCL, IOC_NO_IOPULL);
|
||||
ti_lib_ioc_pin_type_i2c(I2C0_BASE, BOARD_IOID_SDA, BOARD_IOID_SCL);
|
||||
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SDA_HP);
|
||||
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SCL_HP);
|
||||
} else if(interface == BOARD_I2C_INTERFACE_1) {
|
||||
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SDA_HP, IOC_NO_IOPULL);
|
||||
ti_lib_ioc_io_port_pull_set(BOARD_IOID_SCL_HP, IOC_NO_IOPULL);
|
||||
ti_lib_ioc_pin_type_i2c(I2C0_BASE, BOARD_IOID_SDA_HP, BOARD_IOID_SCL_HP);
|
||||
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SDA);
|
||||
ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SCL);
|
||||
}
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
108
platform/srf06-cc26xx/sensortag/board-i2c.h
Normal file
108
platform/srf06-cc26xx/sensortag/board-i2c.h
Normal file
|
|
@ -0,0 +1,108 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-i2c SensorTag 2.0 I2C functions
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx I2C Driver
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef BOARD_I2C_H_
|
||||
#define BOARD_I2C_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define BOARD_I2C_INTERFACE_0 0
|
||||
#define BOARD_I2C_INTERFACE_1 1
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define board_i2c_deselect(...)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initialise the I2C controller with defaults for the sensortag
|
||||
*/
|
||||
void board_i2c_init(void);
|
||||
|
||||
/**
|
||||
* \brief Select an I2C slave
|
||||
* \param interface The I2C interface to be used (BOARD_I2C_INTERFACE_0 or _1)
|
||||
* \param slave_addr The slave's address
|
||||
*
|
||||
* The various sensors on the sensortag are connected either on interface 0 or
|
||||
* 1. All sensors are connected to interface 0, with the exception of the MPU
|
||||
* that is connected to 1.
|
||||
*/
|
||||
void board_i2c_select(uint8_t interface, uint8_t slave_addr);
|
||||
|
||||
/**
|
||||
* \brief Burst read from an I2C device
|
||||
* \param buf Pointer to a buffer where the read data will be stored
|
||||
* \param len Number of bytes to read
|
||||
* \return True on success
|
||||
*/
|
||||
bool board_i2c_read(uint8_t *buf, uint8_t len);
|
||||
|
||||
/**
|
||||
* \brief Burst write to an I2C device
|
||||
* \param buf Pointer to the buffer to be written
|
||||
* \param len Number of bytes to write
|
||||
* \return True on success
|
||||
*/
|
||||
bool board_i2c_write(uint8_t *buf, uint8_t len);
|
||||
|
||||
/**
|
||||
* \brief Single write to an I2C device
|
||||
* \param data The byte to write
|
||||
* \return True on success
|
||||
*/
|
||||
bool board_i2c_write_single(uint8_t data);
|
||||
|
||||
/**
|
||||
* \brief Write and read in one operation
|
||||
* \param wdata Pointer to the buffer to be written
|
||||
* \param wlen Number of bytes to write
|
||||
* \param rdata Pointer to a buffer where the read data will be stored
|
||||
* \param rlen Number of bytes to read
|
||||
* \return True on success
|
||||
*/
|
||||
bool board_i2c_write_read(uint8_t *wdata, uint8_t wlen, uint8_t *rdata,
|
||||
uint8_t rlen);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* BOARD_I2C_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
56
platform/srf06-cc26xx/sensortag/board-peripherals.h
Normal file
56
platform/srf06-cc26xx/sensortag/board-peripherals.h
Normal file
|
|
@ -0,0 +1,56 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \addtogroup cc26xx-srf-tag
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with definitions related to the sensors on the Sensortag-CC26xx
|
||||
*
|
||||
* \note Do not include this file directly.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef BOARD_PERIPHERALS_H_
|
||||
#define BOARD_PERIPHERALS_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "bmp-280-sensor.h"
|
||||
#include "tmp-007-sensor.h"
|
||||
#include "opt-3001-sensor.h"
|
||||
#include "sht-21-sensor.h"
|
||||
#include "mpu-9250-sensor.h"
|
||||
#include "reed-relay.h"
|
||||
#include "buzzer.h"
|
||||
#include "ext-flash.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* BOARD_PERIPHERALS_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
118
platform/srf06-cc26xx/sensortag/board-spi.c
Normal file
118
platform/srf06-cc26xx/sensortag/board-spi.c
Normal file
|
|
@ -0,0 +1,118 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-spi
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Board-specific SPI driver for the Sensortag-CC26xx
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki.h"
|
||||
#include "ti-lib.h"
|
||||
#include "board-spi.h"
|
||||
#include "board.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define CPU_FREQ 48000000ul
|
||||
/*---------------------------------------------------------------------------*/
|
||||
int
|
||||
board_spi_write(const uint8_t *buf, size_t len)
|
||||
{
|
||||
while(len > 0) {
|
||||
uint32_t ul;
|
||||
|
||||
ti_lib_ssi_data_put(SSI0_BASE, *buf);
|
||||
ti_lib_rom_ssi_data_get(SSI0_BASE, &ul);
|
||||
len--;
|
||||
buf++;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
int
|
||||
board_spi_read(uint8_t *buf, size_t len)
|
||||
{
|
||||
while(len > 0) {
|
||||
uint32_t ul;
|
||||
|
||||
if(!ti_lib_rom_ssi_data_put_non_blocking(SSI0_BASE, 0)) {
|
||||
/* Error */
|
||||
return -1;
|
||||
}
|
||||
ti_lib_rom_ssi_data_get(SSI0_BASE, &ul);
|
||||
*buf = (uint8_t)ul;
|
||||
len--;
|
||||
buf++;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
board_spi_flush()
|
||||
{
|
||||
uint32_t ul;
|
||||
while(ti_lib_rom_ssi_data_get_non_blocking(SSI0_BASE, &ul));
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
board_spi_open(uint32_t bit_rate, uint32_t clk_pin)
|
||||
{
|
||||
uint32_t buf;
|
||||
|
||||
/* SPI power */
|
||||
ti_lib_rom_prcm_peripheral_run_enable(PRCM_PERIPH_SSI0);
|
||||
ti_lib_prcm_load_set();
|
||||
while(!ti_lib_prcm_load_get());
|
||||
|
||||
/* SPI configuration */
|
||||
ti_lib_ssi_int_disable(SSI0_BASE, SSI_RXOR | SSI_RXFF | SSI_RXTO | SSI_TXFF);
|
||||
ti_lib_ssi_int_clear(SSI0_BASE, SSI_RXOR | SSI_RXTO);
|
||||
ti_lib_rom_ssi_config_set_exp_clk(SSI0_BASE, CPU_FREQ, SSI_FRF_MOTO_MODE_0,
|
||||
SSI_MODE_MASTER, bit_rate, 8);
|
||||
ti_lib_rom_ioc_pin_type_ssi_master(SSI0_BASE, BOARD_IOID_SPI_MISO,
|
||||
BOARD_IOID_SPI_MOSI, IOID_UNUSED, clk_pin);
|
||||
ti_lib_ssi_enable(SSI0_BASE);
|
||||
|
||||
/* Get rid of residual data from SSI port */
|
||||
while(ti_lib_ssi_data_get_non_blocking(SSI0_BASE, &buf));
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
board_spi_close()
|
||||
{
|
||||
/* Power down SSI0 */
|
||||
ti_lib_rom_prcm_peripheral_run_disable(PRCM_PERIPH_SSI0);
|
||||
ti_lib_prcm_load_set();
|
||||
while(!ti_lib_prcm_load_get());
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
90
platform/srf06-cc26xx/sensortag/board-spi.h
Normal file
90
platform/srf06-cc26xx/sensortag/board-spi.h
Normal file
|
|
@ -0,0 +1,90 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-spi SensorTag 2.0 SPI functions
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx SPI Driver
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef BOARD_SPI_H_
|
||||
#define BOARD_SPI_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include <stdlib.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initialize the SPI interface
|
||||
* \param bit_rate The bit rate to use
|
||||
* \param clk_pin The IOID for the clock pin. This can be IOID_0 etc
|
||||
* \return none
|
||||
*/
|
||||
void board_spi_open(uint32_t bit_rate, uint32_t clk_pin);
|
||||
|
||||
/**
|
||||
* \brief Close the SPI interface
|
||||
* \return True when successful.
|
||||
*/
|
||||
void board_spi_close(void);
|
||||
|
||||
/**
|
||||
* \brief Clear data from the SPI interface
|
||||
* \return none
|
||||
*/
|
||||
void board_spi_flush(void);
|
||||
|
||||
/**
|
||||
* \brief Read from an SPI device
|
||||
* \param buf The buffer to store data
|
||||
* \param length The number of bytes to read
|
||||
* \return True when successful.
|
||||
*/
|
||||
int board_spi_read(uint8_t *buf, size_t length);
|
||||
|
||||
/**
|
||||
* \brief Write to an SPI device
|
||||
* \param buf The buffer with the data to write
|
||||
* \param length The number of bytes to write
|
||||
* \return True when successful.
|
||||
*/
|
||||
int board_spi_write(const uint8_t *buf, size_t length);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* BOARD_SPI_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
152
platform/srf06-cc26xx/sensortag/board.c
Normal file
152
platform/srf06-cc26xx/sensortag/board.c
Normal file
|
|
@ -0,0 +1,152 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Sensortag-specific board initialisation driver
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "buzzer.h"
|
||||
#include "lpm.h"
|
||||
#include "ti-lib.h"
|
||||
#include "board-peripherals.h"
|
||||
#include "board-i2c.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define PRCM_DOMAINS (PRCM_DOMAIN_SERIAL | PRCM_DOMAIN_PERIPH)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
power_domains_on(void)
|
||||
{
|
||||
/* Turn on relevant power domains */
|
||||
ti_lib_prcm_power_domain_on(PRCM_DOMAINS);
|
||||
|
||||
/* Wait for domains to power on */
|
||||
while((ti_lib_prcm_power_domain_status(PRCM_DOMAINS)
|
||||
!= PRCM_DOMAIN_POWER_ON));
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
lpm_wakeup_handler(void)
|
||||
{
|
||||
power_domains_on();
|
||||
|
||||
board_i2c_init();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
shutdown_handler(uint8_t mode)
|
||||
{
|
||||
if(mode == LPM_MODE_SHUTDOWN) {
|
||||
buzzer_stop();
|
||||
SENSORS_DEACTIVATE(bmp_280_sensor);
|
||||
SENSORS_DEACTIVATE(opt_3001_sensor);
|
||||
SENSORS_DEACTIVATE(tmp_007_sensor);
|
||||
SENSORS_DEACTIVATE(sht_21_sensor);
|
||||
mpu_9250_sensor.configure(MPU_9250_SENSOR_SHUTDOWN, 0);
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Declare a data structure to register with LPM.
|
||||
* We don't care about what power mode we'll drop to, we don't care about
|
||||
* getting notified before deep sleep. All we need is to be notified when we
|
||||
* wake up so we can turn power domains back on for I2C and SSI, and to make
|
||||
* sure everything on the board is off before CM3 shutdown.
|
||||
*/
|
||||
LPM_MODULE(sensortag_module, NULL, shutdown_handler, lpm_wakeup_handler);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
board_init()
|
||||
{
|
||||
/* Disable global interrupts */
|
||||
uint8_t int_disabled = ti_lib_int_master_disable();
|
||||
|
||||
power_domains_on();
|
||||
|
||||
/* Configure all clock domains to run at full speed */
|
||||
ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_SYSBUS, PRCM_CLOCK_DIV_1);
|
||||
ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_CPU, PRCM_CLOCK_DIV_1);
|
||||
ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_TIMER, PRCM_CLOCK_DIV_1);
|
||||
ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_SERIAL, PRCM_CLOCK_DIV_1);
|
||||
ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_PERIPH, PRCM_CLOCK_DIV_1);
|
||||
|
||||
/* Enable GPIO peripheral */
|
||||
ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_GPIO);
|
||||
|
||||
/* Apply settings and wait for them to take effect */
|
||||
ti_lib_prcm_load_set();
|
||||
while(!ti_lib_prcm_load_get());
|
||||
|
||||
/* Enable GPT0 module - Wait for the clock to be enabled */
|
||||
ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_TIMER0);
|
||||
ti_lib_prcm_load_set();
|
||||
while(!ti_lib_prcm_load_get());
|
||||
|
||||
/* Keys (input pullup) */
|
||||
ti_lib_rom_ioc_pin_type_gpio_input(BOARD_IOID_KEY_LEFT);
|
||||
ti_lib_rom_ioc_pin_type_gpio_input(BOARD_IOID_KEY_RIGHT);
|
||||
ti_lib_ioc_io_port_pull_set(BOARD_IOID_KEY_LEFT, IOC_IOPULL_UP);
|
||||
ti_lib_ioc_io_port_pull_set(BOARD_IOID_KEY_RIGHT, IOC_IOPULL_UP);
|
||||
|
||||
/* I2C controller */
|
||||
board_i2c_init();
|
||||
|
||||
/* Sensor interface */
|
||||
ti_lib_rom_ioc_pin_type_gpio_input(BOARD_IOID_MPU_INT);
|
||||
ti_lib_ioc_io_port_pull_set(BOARD_IOID_MPU_INT, IOC_IOPULL_DOWN);
|
||||
|
||||
ti_lib_rom_ioc_pin_type_gpio_input(BOARD_IOID_REED_RELAY);
|
||||
ti_lib_ioc_io_port_pull_set(BOARD_IOID_REED_RELAY, IOC_IOPULL_DOWN);
|
||||
|
||||
ti_lib_rom_ioc_pin_type_gpio_output(BOARD_IOID_MPU_POWER);
|
||||
|
||||
/* Flash interface */
|
||||
ti_lib_rom_ioc_pin_type_gpio_output(BOARD_IOID_FLASH_CS);
|
||||
ti_lib_gpio_pin_write(BOARD_FLASH_CS, 1);
|
||||
|
||||
buzzer_init();
|
||||
|
||||
lpm_register_module(&sensortag_module);
|
||||
|
||||
/* Re-enable interrupt if initially enabled. */
|
||||
if(!int_disabled) {
|
||||
ti_lib_int_master_enable();
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
206
platform/srf06-cc26xx/sensortag/board.h
Normal file
206
platform/srf06-cc26xx/sensortag/board.h
Normal file
|
|
@ -0,0 +1,206 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \addtogroup cc26xx-srf-tag
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-peripherals Sensortag Peripherals
|
||||
*
|
||||
* Defines related to the Sensortag-CC26XX
|
||||
*
|
||||
* This file provides connectivity information on LEDs, Buttons, UART and
|
||||
* other peripherals
|
||||
*
|
||||
* This file can be used as the basis to configure other boards using the
|
||||
* CC26XX code as their basis.
|
||||
*
|
||||
* This file is not meant to be modified by the user.
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with definitions related to the I/O connections on the TI
|
||||
* Sensortag
|
||||
*
|
||||
* \note Do not include this file directly. It gets included by contiki-conf
|
||||
* after all relevant directives have been set.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "ioc.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name LED configurations
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
/* Some files include leds.h before us, so we need to get rid of defaults in
|
||||
* leds.h before we provide correct definitions */
|
||||
#undef LEDS_GREEN
|
||||
#undef LEDS_YELLOW
|
||||
#undef LEDS_RED
|
||||
#undef LEDS_CONF_ALL
|
||||
|
||||
#define LEDS_RED 1
|
||||
#define LEDS_GREEN 2
|
||||
#define LEDS_YELLOW LEDS_GREEN
|
||||
#define LEDS_ORANGE LEDS_RED
|
||||
|
||||
#define LEDS_CONF_ALL 3
|
||||
|
||||
/* Notify various examples that we have LEDs */
|
||||
#define PLATFORM_HAS_LEDS 1
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name LED IOID mappings
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_LED_1 IOID_10
|
||||
#define BOARD_IOID_LED_2 IOID_15
|
||||
#define BOARD_LED_1 (1 << BOARD_IOID_LED_1)
|
||||
#define BOARD_LED_2 (1 << BOARD_IOID_LED_2)
|
||||
#define BOARD_LED_ALL (BOARD_LED_1 | BOARD_LED_2)
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UART IOID mapping
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_UART_RX IOID_17
|
||||
#define BOARD_IOID_UART_TX IOID_16
|
||||
#define BOARD_IOID_UART_CTS IOID_UNUSED
|
||||
#define BOARD_IOID_UART_RTS IOID_UNUSED
|
||||
#define BOARD_UART_RXD (1 << BOARD_IOID_UART_RXD)
|
||||
#define BOARD_UART_TXD (1 << BOARD_IOID_UART_TXD)
|
||||
#define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
|
||||
#define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Button IOID mapping
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_KEY_LEFT IOID_0
|
||||
#define BOARD_IOID_KEY_RIGHT IOID_4
|
||||
#define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
|
||||
#define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief SPI IOID mappings
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_SPI_MOSI IOID_19
|
||||
#define BOARD_IOID_SPI_MISO IOID_18
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Buzzer configuration
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_BUZZER IOID_21 /**< Buzzer Pin */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Reed Relay IOID mapping
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_REED_RELAY IOID_3
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name External flash IOID mapping
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_FLASH_CS IOID_14
|
||||
#define BOARD_FLASH_CS (1 << BOARD_IOID_FLASH_CS)
|
||||
#define BOARD_SPI_CLK_FLASH IOID_11
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief I2C IOID mappings
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_SDA IOID_5 /**< Interface 0 SDA: All sensors bar MPU */
|
||||
#define BOARD_IOID_SCL IOID_6 /**< Interface 0 SCL: All sensors bar MPU */
|
||||
#define BOARD_IOID_SDA_HP IOID_8 /**< Interface 1 SDA: MPU */
|
||||
#define BOARD_IOID_SCL_HP IOID_9 /**< Interface 1 SCL: MPU */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief MPU IOID mappings
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_IOID_MPU_INT IOID_7
|
||||
#define BOARD_IOID_MPU_POWER IOID_12
|
||||
#define BOARD_MPU_INT (1 << BOARD_IOID_MPU_INT)
|
||||
#define BOARD_MPU_POWER (1 << BOARD_IOID_MPU_POWER)
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Device string used on startup
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_STRING "TI CC2650 SensorTag"
|
||||
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Board specific iniatialisation
|
||||
* @{
|
||||
*/
|
||||
void board_init(void);
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* BOARD_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
282
platform/srf06-cc26xx/sensortag/button-sensor.c
Normal file
282
platform/srf06-cc26xx/sensortag/button-sensor.c
Normal file
|
|
@ -0,0 +1,282 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-button-sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26xx buttons
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "sensortag/button-sensor.h"
|
||||
#include "gpio-interrupt.h"
|
||||
#include "sys/timer.h"
|
||||
#include "lpm.h"
|
||||
|
||||
#include "ti-lib.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifdef BUTTON_SENSOR_CONF_ENABLE_SHUTDOWN
|
||||
#define BUTTON_SENSOR_ENABLE_SHUTDOWN BUTTON_SENSOR_CONF_ENABLE_SHUTDOWN
|
||||
#else
|
||||
#define BUTTON_SENSOR_ENABLE_SHUTDOWN 1
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define BUTTON_GPIO_CFG (IOC_CURRENT_2MA | IOC_STRENGTH_AUTO | \
|
||||
IOC_IOPULL_UP | IOC_SLEW_DISABLE | \
|
||||
IOC_HYST_DISABLE | IOC_BOTH_EDGES | \
|
||||
IOC_INT_ENABLE | IOC_IOMODE_NORMAL | \
|
||||
IOC_NO_WAKE_UP | IOC_INPUT_ENABLE | \
|
||||
IOC_JTAG_DISABLE)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DEBOUNCE_DURATION (CLOCK_SECOND >> 5)
|
||||
|
||||
struct btn_timer {
|
||||
struct timer debounce;
|
||||
clock_time_t start;
|
||||
clock_time_t duration;
|
||||
};
|
||||
|
||||
static struct btn_timer left_timer, right_timer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Handler for Sensortag-CC26XX button presses
|
||||
*/
|
||||
static void
|
||||
button_press_handler(uint8_t ioid)
|
||||
{
|
||||
if(ioid == BOARD_IOID_KEY_LEFT) {
|
||||
if(!timer_expired(&left_timer.debounce)) {
|
||||
return;
|
||||
}
|
||||
|
||||
timer_set(&left_timer.debounce, DEBOUNCE_DURATION);
|
||||
|
||||
/*
|
||||
* Start press duration counter on press (falling), notify on release
|
||||
* (rising)
|
||||
*/
|
||||
if(ti_lib_gpio_pin_read(BOARD_KEY_LEFT) == 0) {
|
||||
left_timer.start = clock_time();
|
||||
left_timer.duration = 0;
|
||||
} else {
|
||||
left_timer.duration = clock_time() - left_timer.start;
|
||||
sensors_changed(&button_left_sensor);
|
||||
}
|
||||
}
|
||||
|
||||
if(ioid == BOARD_IOID_KEY_RIGHT) {
|
||||
if(BUTTON_SENSOR_ENABLE_SHUTDOWN == 0) {
|
||||
if(!timer_expired(&right_timer.debounce)) {
|
||||
return;
|
||||
}
|
||||
|
||||
timer_set(&right_timer.debounce, DEBOUNCE_DURATION);
|
||||
|
||||
/*
|
||||
* Start press duration counter on press (falling), notify on release
|
||||
* (rising)
|
||||
*/
|
||||
if(ti_lib_gpio_pin_read(BOARD_KEY_RIGHT) == 0) {
|
||||
right_timer.start = clock_time();
|
||||
right_timer.duration = 0;
|
||||
} else {
|
||||
right_timer.duration = clock_time() - right_timer.start;
|
||||
sensors_changed(&button_right_sensor);
|
||||
}
|
||||
} else {
|
||||
lpm_shutdown(BOARD_IOID_KEY_RIGHT);
|
||||
}
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the button sensor for all buttons.
|
||||
*
|
||||
* \param type This function does nothing unless type == SENSORS_ACTIVE
|
||||
* \param c 0: disable the button, non-zero: enable
|
||||
* \param key: One of BOARD_KEY_LEFT, BOARD_KEY_RIGHT etc
|
||||
*/
|
||||
static void
|
||||
config_buttons(int type, int c, uint32_t key)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_HW_INIT:
|
||||
ti_lib_gpio_event_clear(1 << key);
|
||||
ti_lib_ioc_port_configure_set(key, IOC_PORT_GPIO, BUTTON_GPIO_CFG);
|
||||
ti_lib_gpio_dir_mode_set((1 << key), GPIO_DIR_MODE_IN);
|
||||
gpio_interrupt_register_handler(key, button_press_handler);
|
||||
break;
|
||||
case SENSORS_ACTIVE:
|
||||
if(c) {
|
||||
ti_lib_gpio_event_clear(1 << key);
|
||||
ti_lib_ioc_port_configure_set(key, IOC_PORT_GPIO, BUTTON_GPIO_CFG);
|
||||
ti_lib_gpio_dir_mode_set((1 << key), GPIO_DIR_MODE_IN);
|
||||
ti_lib_ioc_int_enable(key);
|
||||
} else {
|
||||
ti_lib_ioc_int_disable(key);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the left button.
|
||||
*
|
||||
* Parameters are passed onto config_buttons, which does the actual
|
||||
* configuration
|
||||
* Parameters are ignored. They have been included because the prototype is
|
||||
* dictated by the core sensor API. The return value is also required by
|
||||
* the API but otherwise ignored.
|
||||
*
|
||||
* \param type passed to config_buttons as-is
|
||||
* \param value passed to config_buttons as-is
|
||||
*
|
||||
* \return ignored
|
||||
*/
|
||||
static int
|
||||
config_left(int type, int value)
|
||||
{
|
||||
config_buttons(type, value, BOARD_IOID_KEY_LEFT);
|
||||
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the right button.
|
||||
*
|
||||
* Parameters are passed onto config_buttons, which does the actual
|
||||
* configuration
|
||||
* Parameters are ignored. They have been included because the prototype is
|
||||
* dictated by the core sensor api. The return value is also required by
|
||||
* the API but otherwise ignored.
|
||||
*
|
||||
* \param type passed to config_buttons as-is
|
||||
* \param value passed to config_buttons as-is
|
||||
*
|
||||
* \return ignored
|
||||
*/
|
||||
static int
|
||||
config_right(int type, int value)
|
||||
{
|
||||
config_buttons(type, value, BOARD_IOID_KEY_RIGHT);
|
||||
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Status function for all buttons
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \param key_io_id BOARD_IOID_KEY_LEFT, BOARD_IOID_KEY_RIGHT etc
|
||||
* \return 1 if the button's port interrupt is enabled (edge detect)
|
||||
*
|
||||
* This function will only be called by status_left, status_right and the
|
||||
* called will pass the correct key_io_id
|
||||
*/
|
||||
static int
|
||||
status(int type, uint32_t key_io_id)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_ACTIVE:
|
||||
case SENSORS_READY:
|
||||
if(ti_lib_ioc_port_configure_get(key_io_id) & IOC_INT_ENABLE) {
|
||||
return 1;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
value_left(int type)
|
||||
{
|
||||
if(type == BUTTON_SENSOR_VALUE_STATE) {
|
||||
return ti_lib_gpio_pin_read(BOARD_KEY_LEFT) == 0 ?
|
||||
BUTTON_SENSOR_VALUE_PRESSED : BUTTON_SENSOR_VALUE_RELEASED;
|
||||
} else if(type == BUTTON_SENSOR_VALUE_DURATION) {
|
||||
return (int)left_timer.duration;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
value_right(int type)
|
||||
{
|
||||
if(type == BUTTON_SENSOR_VALUE_STATE) {
|
||||
return ti_lib_gpio_pin_read(BOARD_KEY_RIGHT) == 0 ?
|
||||
BUTTON_SENSOR_VALUE_PRESSED : BUTTON_SENSOR_VALUE_RELEASED;
|
||||
} else if(type == BUTTON_SENSOR_VALUE_DURATION) {
|
||||
return (int)right_timer.duration;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Status function for the left button.
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return 1 if the button's port interrupt is enabled (edge detect)
|
||||
*
|
||||
* This function will call status. It will pass type verbatim and it will also
|
||||
* pass the correct key_io_id
|
||||
*/
|
||||
static int
|
||||
status_left(int type)
|
||||
{
|
||||
return status(type, BOARD_IOID_KEY_LEFT);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Status function for the right button.
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return 1 if the button's port interrupt is enabled (edge detect)
|
||||
*
|
||||
* This function will call status. It will pass type verbatim and it will also
|
||||
* pass the correct key_io_id
|
||||
*/
|
||||
static int
|
||||
status_right(int type)
|
||||
{
|
||||
return status(type, BOARD_IOID_KEY_RIGHT);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(button_left_sensor, BUTTON_SENSOR, value_left, config_left,
|
||||
status_left);
|
||||
SENSORS_SENSOR(button_right_sensor, BUTTON_SENSOR, value_right, config_right,
|
||||
status_right);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
66
platform/srf06-cc26xx/sensortag/button-sensor.h
Normal file
66
platform/srf06-cc26xx/sensortag/button-sensor.h
Normal file
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-button-sensor SensorTag 2.0 Button Sensor
|
||||
*
|
||||
* One of the buttons can be configured as general purpose or as an on/off key
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx Button Driver
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef BUTTON_SENSOR_H_
|
||||
#define BUTTON_SENSOR_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "lib/sensors.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define BUTTON_SENSOR "Button"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define BUTTON_SENSOR_VALUE_STATE 0
|
||||
#define BUTTON_SENSOR_VALUE_DURATION 1
|
||||
|
||||
#define BUTTON_SENSOR_VALUE_RELEASED 0
|
||||
#define BUTTON_SENSOR_VALUE_PRESSED 1
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define button_sensor button_left_sensor
|
||||
extern const struct sensors_sensor button_left_sensor;
|
||||
extern const struct sensors_sensor button_right_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* BUTTON_SENSOR_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
124
platform/srf06-cc26xx/sensortag/buzzer.c
Normal file
124
platform/srf06-cc26xx/sensortag/buzzer.c
Normal file
|
|
@ -0,0 +1,124 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-buzzer
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26XX Buzzer
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "buzzer.h"
|
||||
#include "ti-lib.h"
|
||||
#include "lpm.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static uint8_t buzzer_on;
|
||||
static lpm_power_domain_lock_t lock;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
buzzer_init()
|
||||
{
|
||||
buzzer_on = 0;
|
||||
|
||||
/* Drive the I/O ID with GPT0 / Timer A */
|
||||
ti_lib_ioc_port_configure_set(BOARD_IOID_BUZZER, IOC_PORT_MCU_PORT_EVENT0,
|
||||
IOC_STD_OUTPUT);
|
||||
|
||||
/* GPT0 / Timer A: PWM, Interrupt Enable */
|
||||
HWREG(GPT0_BASE + GPT_O_TAMR) = (TIMER_CFG_A_PWM & 0xFF) | GPT_TAMR_TAPWMIE;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
uint8_t
|
||||
buzzer_state()
|
||||
{
|
||||
return buzzer_on;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
buzzer_start(int freq)
|
||||
{
|
||||
uint32_t load;
|
||||
|
||||
buzzer_on = 1;
|
||||
|
||||
lpm_pd_lock_obtain(&lock, PRCM_DOMAIN_PERIPH);
|
||||
|
||||
/* Stop the timer */
|
||||
ti_lib_timer_disable(GPT0_BASE, TIMER_A);
|
||||
|
||||
if(freq > 0) {
|
||||
load = (GET_MCU_CLOCK / freq);
|
||||
|
||||
ti_lib_timer_load_set(GPT0_BASE, TIMER_A, load);
|
||||
ti_lib_timer_match_set(GPT0_BASE, TIMER_A, load / 2);
|
||||
|
||||
/* Start */
|
||||
ti_lib_timer_enable(GPT0_BASE, TIMER_A);
|
||||
}
|
||||
|
||||
/* Run in sleep mode */
|
||||
ti_lib_prcm_peripheral_sleep_enable(PRCM_PERIPH_TIMER0);
|
||||
ti_lib_prcm_peripheral_deep_sleep_enable(PRCM_PERIPH_TIMER0);
|
||||
ti_lib_prcm_load_set();
|
||||
while(!ti_lib_prcm_load_get());
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
buzzer_stop()
|
||||
{
|
||||
buzzer_on = 0;
|
||||
|
||||
lpm_pd_lock_release(&lock);
|
||||
|
||||
/* Stop the timer */
|
||||
ti_lib_timer_disable(GPT0_BASE, TIMER_A);
|
||||
|
||||
/*
|
||||
* Stop running in sleep mode.
|
||||
* ToDo: Currently GPT0 is in use by clock_delay_usec (GPT0/TB) and by this
|
||||
* module here (GPT0/TA). clock_delay_usec will never need GPT0/TB in sleep
|
||||
* mode and we control TA here. Thus, with the current setup, it's OK to
|
||||
* control whether GPT0 runs in sleep mode in this module here. However, if
|
||||
* some other module at some point starts using GPT0, we should change this
|
||||
* to happen through an umbrella module
|
||||
*/
|
||||
ti_lib_prcm_peripheral_sleep_disable(PRCM_PERIPH_TIMER0);
|
||||
ti_lib_prcm_peripheral_deep_sleep_disable(PRCM_PERIPH_TIMER0);
|
||||
ti_lib_prcm_load_set();
|
||||
while(!ti_lib_prcm_load_get());
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
74
platform/srf06-cc26xx/sensortag/buzzer.h
Normal file
74
platform/srf06-cc26xx/sensortag/buzzer.h
Normal file
|
|
@ -0,0 +1,74 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-buzzer SensorTag 2.0 Buzzer
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx Buzzer
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef BUZZER_H_
|
||||
#define BUZZER_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initialise the buzzer
|
||||
*/
|
||||
void buzzer_init(void);
|
||||
|
||||
/**
|
||||
* \brief Start the buzzer
|
||||
* \param freq The buzzer frequency
|
||||
*/
|
||||
void buzzer_start(int freq);
|
||||
|
||||
/**
|
||||
* \brief Stop the buzzer
|
||||
*/
|
||||
void buzzer_stop(void);
|
||||
|
||||
/**
|
||||
* \brief Retrieve the buzzer state
|
||||
* \return 1: on, 0: off
|
||||
*/
|
||||
uint8_t buzzer_state(void);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* BUZZER_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
409
platform/srf06-cc26xx/sensortag/ext-flash.c
Normal file
409
platform/srf06-cc26xx/sensortag/ext-flash.c
Normal file
|
|
@ -0,0 +1,409 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-ext-flash
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26xx WinBond W25X20CL Flash
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki.h"
|
||||
#include "ext-flash.h"
|
||||
#include "ti-lib.h"
|
||||
#include "board-spi.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Instruction codes */
|
||||
|
||||
#define BLS_CODE_PROGRAM 0x02 /**< Page Program */
|
||||
#define BLS_CODE_READ 0x03 /**< Read Data */
|
||||
#define BLS_CODE_READ_STATUS 0x05 /**< Read Status Register */
|
||||
#define BLS_CODE_WRITE_ENABLE 0x06 /**< Write Enable */
|
||||
#define BLS_CODE_SECTOR_ERASE 0x20 /**< Sector Erase */
|
||||
#define BLS_CODE_MDID 0x90 /**< Manufacturer Device ID */
|
||||
|
||||
#define BLS_CODE_DP 0xB9 /**< Power down */
|
||||
#define BLS_CODE_RDP 0xAB /**< Power standby */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Erase instructions */
|
||||
|
||||
#define BLS_CODE_ERASE_4K 0x20 /**< Sector Erase */
|
||||
#define BLS_CODE_ERASE_32K 0x52
|
||||
#define BLS_CODE_ERASE_64K 0xD8
|
||||
#define BLS_CODE_ERASE_ALL 0xC7 /**< Mass Erase */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Bitmasks of the status register */
|
||||
|
||||
#define BLS_STATUS_SRWD_BM 0x80
|
||||
#define BLS_STATUS_BP_BM 0x0C
|
||||
#define BLS_STATUS_WEL_BM 0x02
|
||||
#define BLS_STATUS_WIP_BM 0x01
|
||||
|
||||
#define BLS_STATUS_BIT_BUSY 0x01 /**< Busy bit of the status register */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Part specific constants */
|
||||
|
||||
#define BLS_MANUFACTURER_ID 0xEF
|
||||
#define BLS_DEVICE_ID 0x11
|
||||
|
||||
#define BLS_PROGRAM_PAGE_SIZE 256
|
||||
#define BLS_ERASE_SECTOR_SIZE 4096
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* Clear external flash CSN line
|
||||
*/
|
||||
static void
|
||||
select(void)
|
||||
{
|
||||
ti_lib_gpio_pin_write(BOARD_FLASH_CS, 0);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* Set external flash CSN line
|
||||
*/
|
||||
static void
|
||||
deselect(void)
|
||||
{
|
||||
ti_lib_gpio_pin_write(BOARD_FLASH_CS, 1);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Wait till previous erase/program operation completes.
|
||||
* \return Zero when successful.
|
||||
*/
|
||||
static int
|
||||
wait_ready(void)
|
||||
{
|
||||
const uint8_t wbuf[1] = { BLS_CODE_READ_STATUS };
|
||||
|
||||
select();
|
||||
|
||||
/* Throw away all garbages */
|
||||
board_spi_flush();
|
||||
|
||||
int ret = board_spi_write(wbuf, sizeof(wbuf));
|
||||
|
||||
if(ret) {
|
||||
deselect();
|
||||
return -2;
|
||||
}
|
||||
|
||||
for(;;) {
|
||||
uint8_t buf;
|
||||
/* Note that this temporary implementation is not
|
||||
* energy efficient.
|
||||
* Thread could have yielded while waiting for flash
|
||||
* erase/program to complete.
|
||||
*/
|
||||
ret = board_spi_read(&buf, sizeof(buf));
|
||||
|
||||
if(ret) {
|
||||
/* Error */
|
||||
deselect();
|
||||
return -2;
|
||||
}
|
||||
if(!(buf & BLS_STATUS_BIT_BUSY)) {
|
||||
/* Now ready */
|
||||
break;
|
||||
}
|
||||
}
|
||||
deselect();
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Put the device in power save mode. No access to data; only
|
||||
* the status register is accessible.
|
||||
* \return True when SPI transactions succeed
|
||||
*/
|
||||
static bool
|
||||
power_down(void)
|
||||
{
|
||||
uint8_t cmd;
|
||||
bool success;
|
||||
|
||||
cmd = BLS_CODE_DP;
|
||||
select();
|
||||
success = board_spi_write(&cmd, sizeof(cmd));
|
||||
deselect();
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Take device out of power save mode and prepare it for normal operation
|
||||
* \return True if the command was written successfully
|
||||
*/
|
||||
static bool
|
||||
power_standby(void)
|
||||
{
|
||||
uint8_t cmd;
|
||||
bool success;
|
||||
|
||||
cmd = BLS_CODE_RDP;
|
||||
select();
|
||||
success = board_spi_write(&cmd, sizeof(cmd));
|
||||
|
||||
if(success) {
|
||||
success = wait_ready() == 0;
|
||||
}
|
||||
|
||||
deselect();
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* Verify the flash part.
|
||||
* @return True when successful.
|
||||
*/
|
||||
static bool
|
||||
verify_part(void)
|
||||
{
|
||||
const uint8_t wbuf[] = { BLS_CODE_MDID, 0xFF, 0xFF, 0x00 };
|
||||
uint8_t rbuf[2];
|
||||
int ret;
|
||||
|
||||
select();
|
||||
|
||||
ret = board_spi_write(wbuf, sizeof(wbuf));
|
||||
|
||||
if(ret) {
|
||||
deselect();
|
||||
return false;
|
||||
}
|
||||
|
||||
ret = board_spi_read(rbuf, sizeof(rbuf));
|
||||
deselect();
|
||||
|
||||
if(ret || rbuf[0] != BLS_MANUFACTURER_ID || rbuf[1] != BLS_DEVICE_ID) {
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Enable write.
|
||||
* \return Zero when successful.
|
||||
*/
|
||||
static int
|
||||
write_enable(void)
|
||||
{
|
||||
const uint8_t wbuf[] = { BLS_CODE_WRITE_ENABLE };
|
||||
|
||||
select();
|
||||
int ret = board_spi_write(wbuf, sizeof(wbuf));
|
||||
deselect();
|
||||
|
||||
if(ret) {
|
||||
return -3;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
ext_flash_open()
|
||||
{
|
||||
board_spi_open(4000000, BOARD_SPI_CLK_FLASH);
|
||||
|
||||
/* GPIO pin configuration */
|
||||
ti_lib_ioc_pin_type_gpio_output(BOARD_IOID_FLASH_CS);
|
||||
|
||||
/* Default output to clear chip select */
|
||||
deselect();
|
||||
|
||||
/* Put the part is standby mode */
|
||||
power_standby();
|
||||
|
||||
return verify_part();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
ext_flash_close()
|
||||
{
|
||||
/* Put the part in low power mode */
|
||||
power_down();
|
||||
|
||||
board_spi_close();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
ext_flash_read(size_t offset, size_t length, uint8_t *buf)
|
||||
{
|
||||
uint8_t wbuf[4];
|
||||
|
||||
/* Wait till previous erase/program operation completes */
|
||||
int ret = wait_ready();
|
||||
if(ret) {
|
||||
return false;
|
||||
}
|
||||
|
||||
/*
|
||||
* SPI is driven with very low frequency (1MHz < 33MHz fR spec)
|
||||
* in this implementation, hence it is not necessary to use fast read.
|
||||
*/
|
||||
wbuf[0] = BLS_CODE_READ;
|
||||
wbuf[1] = (offset >> 16) & 0xff;
|
||||
wbuf[2] = (offset >> 8) & 0xff;
|
||||
wbuf[3] = offset & 0xff;
|
||||
|
||||
select();
|
||||
|
||||
if(board_spi_write(wbuf, sizeof(wbuf))) {
|
||||
/* failure */
|
||||
deselect();
|
||||
return false;
|
||||
}
|
||||
|
||||
ret = board_spi_read(buf, length);
|
||||
|
||||
deselect();
|
||||
|
||||
return ret == 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
ext_flash_write(size_t offset, size_t length, const uint8_t *buf)
|
||||
{
|
||||
uint8_t wbuf[4];
|
||||
int ret;
|
||||
size_t ilen; /* interim length per instruction */
|
||||
|
||||
while(length > 0) {
|
||||
/* Wait till previous erase/program operation completes */
|
||||
ret = wait_ready();
|
||||
if(ret) {
|
||||
return false;
|
||||
}
|
||||
|
||||
ret = write_enable();
|
||||
if(ret) {
|
||||
return false;
|
||||
}
|
||||
|
||||
ilen = BLS_PROGRAM_PAGE_SIZE - (offset % BLS_PROGRAM_PAGE_SIZE);
|
||||
if(length < ilen) {
|
||||
ilen = length;
|
||||
}
|
||||
|
||||
wbuf[0] = BLS_CODE_PROGRAM;
|
||||
wbuf[1] = (offset >> 16) & 0xff;
|
||||
wbuf[2] = (offset >> 8) & 0xff;
|
||||
wbuf[3] = offset & 0xff;
|
||||
|
||||
offset += ilen;
|
||||
length -= ilen;
|
||||
|
||||
/* Upto 100ns CS hold time (which is not clear
|
||||
* whether it's application only inbetween reads)
|
||||
* is not imposed here since above instructions
|
||||
* should be enough to delay
|
||||
* as much. */
|
||||
select();
|
||||
|
||||
if(board_spi_write(wbuf, sizeof(wbuf))) {
|
||||
/* failure */
|
||||
deselect();
|
||||
return false;
|
||||
}
|
||||
|
||||
if(board_spi_write(buf, ilen)) {
|
||||
/* failure */
|
||||
deselect();
|
||||
return false;
|
||||
}
|
||||
buf += ilen;
|
||||
deselect();
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
ext_flash_erase(size_t offset, size_t length)
|
||||
{
|
||||
/*
|
||||
* Note that Block erase might be more efficient when the floor map
|
||||
* is well planned for OTA, but to simplify this implementation,
|
||||
* sector erase is used blindly.
|
||||
*/
|
||||
uint8_t wbuf[4];
|
||||
size_t i, numsectors;
|
||||
size_t endoffset = offset + length - 1;
|
||||
|
||||
offset = (offset / BLS_ERASE_SECTOR_SIZE) * BLS_ERASE_SECTOR_SIZE;
|
||||
numsectors = (endoffset - offset + BLS_ERASE_SECTOR_SIZE - 1) / BLS_ERASE_SECTOR_SIZE;
|
||||
|
||||
wbuf[0] = BLS_CODE_SECTOR_ERASE;
|
||||
|
||||
for(i = 0; i < numsectors; i++) {
|
||||
/* Wait till previous erase/program operation completes */
|
||||
int ret = wait_ready();
|
||||
if(ret) {
|
||||
return false;
|
||||
}
|
||||
|
||||
ret = write_enable();
|
||||
if(ret) {
|
||||
return false;
|
||||
}
|
||||
|
||||
wbuf[1] = (offset >> 16) & 0xff;
|
||||
wbuf[2] = (offset >> 8) & 0xff;
|
||||
wbuf[3] = offset & 0xff;
|
||||
|
||||
select();
|
||||
|
||||
if(board_spi_write(wbuf, sizeof(wbuf))) {
|
||||
/* failure */
|
||||
deselect();
|
||||
return false;
|
||||
}
|
||||
deselect();
|
||||
|
||||
offset += BLS_ERASE_SECTOR_SIZE;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
ext_flash_test(void)
|
||||
{
|
||||
bool ret;
|
||||
|
||||
ret = ext_flash_open();
|
||||
ext_flash_close();
|
||||
|
||||
return ret;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
103
platform/srf06-cc26xx/sensortag/ext-flash.h
Normal file
103
platform/srf06-cc26xx/sensortag/ext-flash.h
Normal file
|
|
@ -0,0 +1,103 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-ext-flash SensorTag 2.0 External Flash
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx External Flash Driver
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef EXT_FLASH_H_
|
||||
#define EXT_FLASH_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#include <stdbool.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initialize storage driver.
|
||||
* \return True when successful.
|
||||
*/
|
||||
bool ext_flash_open(void);
|
||||
|
||||
/**
|
||||
* \brief Close the storage driver
|
||||
*/
|
||||
void ext_flash_close(void);
|
||||
|
||||
/**
|
||||
* \brief Read storage content
|
||||
* \param offset Address to read from
|
||||
* \param length Number of bytes to read
|
||||
* \param buf Buffer where to store the read bytes
|
||||
* \return True when successful.
|
||||
*
|
||||
* buf must be allocated by the caller
|
||||
*/
|
||||
bool ext_flash_read(size_t offset, size_t length, uint8_t *buf);
|
||||
|
||||
/**
|
||||
* \brief Erase storage sectors corresponding to the range.
|
||||
* \param offset Address to start erasing
|
||||
* \param length Number of bytes to erase
|
||||
* \return True when successful.
|
||||
*
|
||||
* The erase operation will be sector-wise, therefore a call to this function
|
||||
* will generally start the erase procedure at an address lower than offset
|
||||
*/
|
||||
bool ext_flash_erase(size_t offset, size_t length);
|
||||
|
||||
/**
|
||||
* \brief Write to storage sectors.
|
||||
* \param offset Address to write to
|
||||
* \param length Number of bytes to write
|
||||
* \param buf Buffer holding the bytes to be written
|
||||
*
|
||||
* \return True when successful.
|
||||
*/
|
||||
bool ext_flash_write(size_t offset, size_t length, const uint8_t *buf);
|
||||
|
||||
/**
|
||||
* \brief Test the flash (power on self-test)
|
||||
* \return True when successful.
|
||||
*/
|
||||
bool ext_flash_test(void);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* EXT_FLASH_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
81
platform/srf06-cc26xx/sensortag/leds-arch.c
Normal file
81
platform/srf06-cc26xx/sensortag/leds-arch.c
Normal file
|
|
@ -0,0 +1,81 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26XX LEDs
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki.h"
|
||||
#include "dev/leds.h"
|
||||
|
||||
#include "ti-lib.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static unsigned char c;
|
||||
static int inited = 0;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
leds_arch_init(void)
|
||||
{
|
||||
if(inited) {
|
||||
return;
|
||||
}
|
||||
inited = 1;
|
||||
|
||||
ti_lib_rom_ioc_pin_type_gpio_output(BOARD_IOID_LED_1);
|
||||
ti_lib_rom_ioc_pin_type_gpio_output(BOARD_IOID_LED_2);
|
||||
|
||||
ti_lib_gpio_pin_write(BOARD_LED_ALL, 0);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
unsigned char
|
||||
leds_arch_get(void)
|
||||
{
|
||||
return c;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
leds_arch_set(unsigned char leds)
|
||||
{
|
||||
c = leds;
|
||||
ti_lib_gpio_pin_write(BOARD_LED_ALL, 0);
|
||||
|
||||
if((leds & LEDS_RED) == LEDS_RED) {
|
||||
ti_lib_gpio_pin_write(BOARD_LED_1, 1);
|
||||
}
|
||||
if((leds & LEDS_YELLOW) == LEDS_YELLOW) {
|
||||
ti_lib_gpio_pin_write(BOARD_LED_2, 1);
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
685
platform/srf06-cc26xx/sensortag/mpu-9250-sensor.c
Normal file
685
platform/srf06-cc26xx/sensortag/mpu-9250-sensor.c
Normal file
|
|
@ -0,0 +1,685 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-mpu
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26XX Invensense MPU9250 motion processing unit
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "mpu-9250-sensor.h"
|
||||
#include "sys/rtimer.h"
|
||||
#include "sensor-common.h"
|
||||
#include "board-i2c.h"
|
||||
|
||||
#include "ti-lib.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
#include <math.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Sensor I2C address */
|
||||
#define SENSOR_I2C_ADDRESS 0x68
|
||||
#define SENSOR_MAG_I2_ADDRESS 0x0C
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Registers */
|
||||
#define SELF_TEST_X_GYRO 0x00 /* R/W */
|
||||
#define SELF_TEST_Y_GYRO 0x01 /* R/W */
|
||||
#define SELF_TEST_Z_GYRO 0x02 /* R/W */
|
||||
#define SELF_TEST_X_ACCEL 0x0D /* R/W */
|
||||
#define SELF_TEST_Z_ACCEL 0x0E /* R/W */
|
||||
#define SELF_TEST_Y_ACCEL 0x0F /* R/W */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define XG_OFFSET_H 0x13 /* R/W */
|
||||
#define XG_OFFSET_L 0x14 /* R/W */
|
||||
#define YG_OFFSET_H 0x15 /* R/W */
|
||||
#define YG_OFFSET_L 0x16 /* R/W */
|
||||
#define ZG_OFFSET_H 0x17 /* R/W */
|
||||
#define ZG_OFFSET_L 0x18 /* R/W */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define SMPLRT_DIV 0x19 /* R/W */
|
||||
#define CONFIG 0x1A /* R/W */
|
||||
#define GYRO_CONFIG 0x1B /* R/W */
|
||||
#define ACCEL_CONFIG 0x1C /* R/W */
|
||||
#define ACCEL_CONFIG_2 0x1D /* R/W */
|
||||
#define LP_ACCEL_ODR 0x1E /* R/W */
|
||||
#define WOM_THR 0x1F /* R/W */
|
||||
#define FIFO_EN 0x23 /* R/W */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Registers 0x24 - 0x36 are not applicable to the SensorTag HW configuration
|
||||
* (IC2 Master)
|
||||
*/
|
||||
#define INT_PIN_CFG 0x37 /* R/W */
|
||||
#define INT_ENABLE 0x38 /* R/W */
|
||||
#define INT_STATUS 0x3A /* R */
|
||||
#define ACCEL_XOUT_H 0x3B /* R */
|
||||
#define ACCEL_XOUT_L 0x3C /* R */
|
||||
#define ACCEL_YOUT_H 0x3D /* R */
|
||||
#define ACCEL_YOUT_L 0x3E /* R */
|
||||
#define ACCEL_ZOUT_H 0x3F /* R */
|
||||
#define ACCEL_ZOUT_L 0x40 /* R */
|
||||
#define TEMP_OUT_H 0x41 /* R */
|
||||
#define TEMP_OUT_L 0x42 /* R */
|
||||
#define GYRO_XOUT_H 0x43 /* R */
|
||||
#define GYRO_XOUT_L 0x44 /* R */
|
||||
#define GYRO_YOUT_H 0x45 /* R */
|
||||
#define GYRO_YOUT_L 0x46 /* R */
|
||||
#define GYRO_ZOUT_H 0x47 /* R */
|
||||
#define GYRO_ZOUT_L 0x48 /* R */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Registers 0x49 - 0x60 are not applicable to the SensorTag HW configuration
|
||||
* (external sensor data)
|
||||
*
|
||||
* Registers 0x63 - 0x67 are not applicable to the SensorTag HW configuration
|
||||
* (I2C master)
|
||||
*/
|
||||
#define SIGNAL_PATH_RESET 0x68 /* R/W */
|
||||
#define ACCEL_INTEL_CTRL 0x69 /* R/W */
|
||||
#define USER_CTRL 0x6A /* R/W */
|
||||
#define PWR_MGMT_1 0x6B /* R/W */
|
||||
#define PWR_MGMT_2 0x6C /* R/W */
|
||||
#define FIFO_COUNT_H 0x72 /* R/W */
|
||||
#define FIFO_COUNT_L 0x73 /* R/W */
|
||||
#define FIFO_R_W 0x74 /* R/W */
|
||||
#define WHO_AM_I 0x75 /* R/W */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Masks is mpuConfig valiable */
|
||||
#define ACC_CONFIG_MASK 0x38
|
||||
#define GYRO_CONFIG_MASK 0x07
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Values PWR_MGMT_1 */
|
||||
#define MPU_SLEEP 0x4F /* Sleep + stop all clocks */
|
||||
#define MPU_WAKE_UP 0x09 /* Disable temp. + intern osc */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Values PWR_MGMT_2 */
|
||||
#define ALL_AXES 0x3F
|
||||
#define GYRO_AXES 0x07
|
||||
#define ACC_AXES 0x38
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Data sizes */
|
||||
#define DATA_SIZE 6
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Output data rates */
|
||||
#define INV_LPA_0_3125HZ 0
|
||||
#define INV_LPA_0_625HZ 1
|
||||
#define INV_LPA_1_25HZ 2
|
||||
#define INV_LPA_2_5HZ 3
|
||||
#define INV_LPA_5HZ 4
|
||||
#define INV_LPA_10HZ 5
|
||||
#define INV_LPA_20HZ 6
|
||||
#define INV_LPA_40HZ 7
|
||||
#define INV_LPA_80HZ 8
|
||||
#define INV_LPA_160HZ 9
|
||||
#define INV_LPA_320HZ 10
|
||||
#define INV_LPA_640HZ 11
|
||||
#define INV_LPA_STOPPED 255
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Bit values */
|
||||
#define BIT_ANY_RD_CLR 0x10
|
||||
#define BIT_RAW_RDY_EN 0x01
|
||||
#define BIT_WOM_EN 0x40
|
||||
#define BIT_LPA_CYCLE 0x20
|
||||
#define BIT_STBY_XA 0x20
|
||||
#define BIT_STBY_YA 0x10
|
||||
#define BIT_STBY_ZA 0x08
|
||||
#define BIT_STBY_XG 0x04
|
||||
#define BIT_STBY_YG 0x02
|
||||
#define BIT_STBY_ZG 0x01
|
||||
#define BIT_STBY_XYZA (BIT_STBY_XA | BIT_STBY_YA | BIT_STBY_ZA)
|
||||
#define BIT_STBY_XYZG (BIT_STBY_XG | BIT_STBY_YG | BIT_STBY_ZG)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* User control register */
|
||||
#define BIT_ACTL 0x80
|
||||
#define BIT_LATCH_EN 0x20
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* INT Pin / Bypass Enable Configuration */
|
||||
#define BIT_AUX_IF_EN 0x20 /* I2C_MST_EN */
|
||||
#define BIT_BYPASS_EN 0x02
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define ACC_RANGE_INVALID -1
|
||||
|
||||
#define ACC_RANGE_2G 0
|
||||
#define ACC_RANGE_4G 1
|
||||
#define ACC_RANGE_8G 2
|
||||
#define ACC_RANGE_16G 3
|
||||
|
||||
#define MPU_AX_GYR_X 2
|
||||
#define MPU_AX_GYR_Y 1
|
||||
#define MPU_AX_GYR_Z 0
|
||||
#define MPU_AX_GYR 0x07
|
||||
|
||||
#define MPU_AX_ACC_X 5
|
||||
#define MPU_AX_ACC_Y 4
|
||||
#define MPU_AX_ACC_Z 3
|
||||
#define MPU_AX_ACC 0x38
|
||||
|
||||
#define MPU_AX_MAG 6
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define MPU_DATA_READY 0x01
|
||||
#define MPU_MOVEMENT 0x40
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Sensor selection/deselection */
|
||||
#define SENSOR_SELECT() board_i2c_select(BOARD_I2C_INTERFACE_1, SENSOR_I2C_ADDRESS)
|
||||
#define SENSOR_DESELECT() board_i2c_deselect()
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Delay */
|
||||
#define delay_ms(i) (ti_lib_cpu_delay(8000 * (i)))
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static uint8_t mpu_config;
|
||||
static uint8_t acc_range;
|
||||
static uint8_t acc_range_reg;
|
||||
static uint8_t val;
|
||||
static uint8_t interrupt_status;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define SENSOR_STATUS_DISABLED 0
|
||||
#define SENSOR_STATUS_BOOTING 1
|
||||
#define SENSOR_STATUS_ENABLED 2
|
||||
|
||||
static int enabled = SENSOR_STATUS_DISABLED;
|
||||
static int elements;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* 3 16-byte words for all sensor readings */
|
||||
#define SENSOR_DATA_BUF_SIZE 3
|
||||
|
||||
static uint16_t sensor_value[SENSOR_DATA_BUF_SIZE];
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Wait SENSOR_BOOT_DELAY ticks for the sensor to boot and
|
||||
* SENSOR_STARTUP_DELAY for readings to be ready
|
||||
* Gyro is a little slower than Acc
|
||||
*/
|
||||
#define SENSOR_BOOT_DELAY 8
|
||||
#define SENSOR_STARTUP_DELAY 5
|
||||
|
||||
static struct ctimer startup_timer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Wait for the MPU to have data ready */
|
||||
rtimer_clock_t t0;
|
||||
|
||||
/*
|
||||
* Wait timeout in rtimer ticks. This is just a random low number, since the
|
||||
* first time we read the sensor status, it should be ready to return data
|
||||
*/
|
||||
#define READING_WAIT_TIMEOUT 10
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Place the MPU in low power mode
|
||||
*/
|
||||
static void
|
||||
sensor_sleep(void)
|
||||
{
|
||||
SENSOR_SELECT();
|
||||
|
||||
val = ALL_AXES;
|
||||
sensor_common_write_reg(PWR_MGMT_2, &val, 1);
|
||||
|
||||
val = MPU_SLEEP;
|
||||
sensor_common_write_reg(PWR_MGMT_1, &val, 1);
|
||||
SENSOR_DESELECT();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Exit low power mode
|
||||
*/
|
||||
static void
|
||||
sensor_wakeup(void)
|
||||
{
|
||||
SENSOR_SELECT();
|
||||
val = MPU_WAKE_UP;
|
||||
sensor_common_write_reg(PWR_MGMT_1, &val, 1);
|
||||
|
||||
/* All axis initially disabled */
|
||||
val = ALL_AXES;
|
||||
sensor_common_write_reg(PWR_MGMT_2, &val, 1);
|
||||
mpu_config = 0;
|
||||
|
||||
/* Restore the range */
|
||||
sensor_common_write_reg(ACCEL_CONFIG, &acc_range_reg, 1);
|
||||
|
||||
/* Clear interrupts */
|
||||
sensor_common_read_reg(INT_STATUS, &val, 1);
|
||||
SENSOR_DESELECT();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Select gyro and accelerometer axes
|
||||
*/
|
||||
static void
|
||||
select_axes(void)
|
||||
{
|
||||
val = ~mpu_config;
|
||||
sensor_common_write_reg(PWR_MGMT_2, &val, 1);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
convert_to_le(uint8_t *data, uint8_t len)
|
||||
{
|
||||
int i;
|
||||
for(i = 0; i < len; i += 2) {
|
||||
uint8_t tmp;
|
||||
tmp = data[i];
|
||||
data[i] = data[i + 1];
|
||||
data[i + 1] = tmp;
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Set the range of the accelerometer
|
||||
* \param new_range: ACC_RANGE_2G, ACC_RANGE_4G, ACC_RANGE_8G, ACC_RANGE_16G
|
||||
* \return true if the write to the sensor succeeded
|
||||
*/
|
||||
static bool
|
||||
acc_set_range(uint8_t new_range)
|
||||
{
|
||||
bool success;
|
||||
|
||||
if(new_range == acc_range) {
|
||||
return true;
|
||||
}
|
||||
|
||||
success = false;
|
||||
|
||||
acc_range_reg = (new_range << 3);
|
||||
|
||||
/* Apply the range */
|
||||
SENSOR_SELECT();
|
||||
success = sensor_common_write_reg(ACCEL_CONFIG, &acc_range_reg, 1);
|
||||
SENSOR_DESELECT();
|
||||
|
||||
if(success) {
|
||||
acc_range = new_range;
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initialise the MPU
|
||||
* \return True if success
|
||||
*/
|
||||
static bool
|
||||
init_sensor(void)
|
||||
{
|
||||
bool ret;
|
||||
|
||||
interrupt_status = false;
|
||||
acc_range = ACC_RANGE_INVALID;
|
||||
mpu_config = 0; /* All axes off */
|
||||
|
||||
/* Device reset */
|
||||
val = 0x80;
|
||||
SENSOR_SELECT();
|
||||
ret = sensor_common_write_reg(PWR_MGMT_1, &val, 1);
|
||||
SENSOR_DESELECT();
|
||||
|
||||
if(ret) {
|
||||
delay_ms(200);
|
||||
|
||||
/* Initial configuration */
|
||||
acc_set_range(ACC_RANGE_8G);
|
||||
/* Power save */
|
||||
sensor_sleep();
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Check whether a data or wake on motion interrupt has occurred
|
||||
* \return Return the interrupt status
|
||||
*
|
||||
* This driver does not use interrupts, however this function allows us to
|
||||
* determine whether a new sensor reading is available
|
||||
*/
|
||||
static uint8_t
|
||||
int_status(void)
|
||||
{
|
||||
SENSOR_SELECT();
|
||||
sensor_common_read_reg(INT_STATUS, &interrupt_status, 1);
|
||||
SENSOR_DESELECT();
|
||||
|
||||
return interrupt_status;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Enable the MPU
|
||||
* \param axes: Gyro bitmap [0..2], X = 1, Y = 2, Z = 4. 0 = gyro off
|
||||
* Acc bitmap [3..5], X = 8, Y = 16, Z = 32. 0 = accelerometer off
|
||||
*/
|
||||
static void
|
||||
enable_sensor(uint16_t axes)
|
||||
{
|
||||
if(mpu_config == 0 && axes != 0) {
|
||||
/* Wake up the sensor if it was off */
|
||||
sensor_wakeup();
|
||||
}
|
||||
|
||||
mpu_config = axes;
|
||||
|
||||
if(mpu_config != 0) {
|
||||
/* Enable gyro + accelerometer readout */
|
||||
select_axes();
|
||||
delay_ms(10);
|
||||
} else if(mpu_config == 0) {
|
||||
sensor_sleep();
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Read data from the accelerometer - X, Y, Z - 3 words
|
||||
* \return True if a valid reading could be taken, false otherwise
|
||||
*/
|
||||
static bool
|
||||
acc_read(uint16_t *data)
|
||||
{
|
||||
bool success;
|
||||
|
||||
if(interrupt_status & BIT_RAW_RDY_EN) {
|
||||
/* Burst read of all accelerometer values */
|
||||
SENSOR_SELECT();
|
||||
success = sensor_common_read_reg(ACCEL_XOUT_H, (uint8_t *)data, DATA_SIZE);
|
||||
SENSOR_DESELECT();
|
||||
|
||||
if(success) {
|
||||
convert_to_le((uint8_t *)data, DATA_SIZE);
|
||||
} else {
|
||||
sensor_common_set_error_data((uint8_t *)data, DATA_SIZE);
|
||||
}
|
||||
} else {
|
||||
/* Data not ready */
|
||||
success = false;
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Read data from the gyroscope - X, Y, Z - 3 words
|
||||
* \return True if a valid reading could be taken, false otherwise
|
||||
*/
|
||||
static bool
|
||||
gyro_read(uint16_t *data)
|
||||
{
|
||||
bool success;
|
||||
|
||||
if(interrupt_status & BIT_RAW_RDY_EN) {
|
||||
/* Select this sensor */
|
||||
SENSOR_SELECT();
|
||||
|
||||
/* Burst read of all gyroscope values */
|
||||
success = sensor_common_read_reg(GYRO_XOUT_H, (uint8_t *)data, DATA_SIZE);
|
||||
|
||||
SENSOR_DESELECT();
|
||||
|
||||
if(success) {
|
||||
convert_to_le((uint8_t *)data, DATA_SIZE);
|
||||
} else {
|
||||
sensor_common_set_error_data((uint8_t *)data, DATA_SIZE);
|
||||
}
|
||||
} else {
|
||||
success = false;
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Convert accelerometer raw reading to a value in G
|
||||
* \param raw_data The raw accelerometer reading
|
||||
* \return The converted value
|
||||
*/
|
||||
static float
|
||||
acc_convert(int16_t raw_data)
|
||||
{
|
||||
float v = 0;
|
||||
|
||||
switch(acc_range) {
|
||||
case ACC_RANGE_2G:
|
||||
/* Calculate acceleration, unit G, range -2, +2 */
|
||||
v = (raw_data * 1.0) / (32768 / 2);
|
||||
break;
|
||||
case ACC_RANGE_4G:
|
||||
/* Calculate acceleration, unit G, range -4, +4 */
|
||||
v = (raw_data * 1.0) / (32768 / 4);
|
||||
break;
|
||||
case ACC_RANGE_8G:
|
||||
/* Calculate acceleration, unit G, range -8, +8 */
|
||||
v = (raw_data * 1.0) / (32768 / 8);
|
||||
break;
|
||||
case ACC_RANGE_16G:
|
||||
/* Calculate acceleration, unit G, range -16, +16 */
|
||||
v = (raw_data * 1.0) / (32768 / 16);
|
||||
break;
|
||||
default:
|
||||
v = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
return v;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Convert gyro raw reading to a value in deg/sec
|
||||
* \param raw_data The raw accelerometer reading
|
||||
* \return The converted value
|
||||
*/
|
||||
static float
|
||||
gyro_convert(int16_t raw_data)
|
||||
{
|
||||
/* calculate rotation, unit deg/s, range -250, +250 */
|
||||
return (raw_data * 1.0) / (65536 / 500);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
notify_ready(void *not_used)
|
||||
{
|
||||
enabled = SENSOR_STATUS_ENABLED;
|
||||
sensors_changed(&mpu_9250_sensor);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
initialise(void *not_used)
|
||||
{
|
||||
init_sensor();
|
||||
|
||||
/* Configure the accelerometer range */
|
||||
if((elements & MPU_9250_SENSOR_TYPE_ACC) != 0) {
|
||||
acc_set_range(MPU_9250_SENSOR_ACC_RANGE);
|
||||
}
|
||||
|
||||
enable_sensor(elements & MPU_9250_SENSOR_TYPE_ALL);
|
||||
|
||||
ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, notify_ready, NULL);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
power_up(void)
|
||||
{
|
||||
ti_lib_gpio_pin_write(BOARD_MPU_POWER, 1);
|
||||
enabled = SENSOR_STATUS_BOOTING;
|
||||
|
||||
ctimer_set(&startup_timer, SENSOR_BOOT_DELAY, initialise, NULL);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns a reading from the sensor
|
||||
* \param type MPU_9250_SENSOR_TYPE_ACC_[XYZ] or MPU_9250_SENSOR_TYPE_GYRO_[XYZ]
|
||||
* \return centi-G (ACC) or centi-Deg/Sec (Gyro)
|
||||
*/
|
||||
static int
|
||||
value(int type)
|
||||
{
|
||||
int rv;
|
||||
float converted_val = 0;
|
||||
|
||||
if(enabled == SENSOR_STATUS_DISABLED) {
|
||||
PRINTF("MPU: Sensor Disabled\n");
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
memset(sensor_value, 0, sizeof(sensor_value));
|
||||
|
||||
if((type & MPU_9250_SENSOR_TYPE_ACC) != 0) {
|
||||
t0 = RTIMER_NOW();
|
||||
|
||||
while(!int_status() &&
|
||||
(RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + READING_WAIT_TIMEOUT)));
|
||||
|
||||
rv = acc_read(sensor_value);
|
||||
|
||||
if(rv == 0) {
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
PRINTF("MPU: ACC = 0x%04x 0x%04x 0x%04x = ",
|
||||
sensor_value[0], sensor_value[1], sensor_value[2]);
|
||||
|
||||
/* Convert */
|
||||
if(type == MPU_9250_SENSOR_TYPE_ACC_X) {
|
||||
converted_val = acc_convert(sensor_value[0]);
|
||||
} else if(type == MPU_9250_SENSOR_TYPE_ACC_Y) {
|
||||
converted_val = acc_convert(sensor_value[1]);
|
||||
} else if(type == MPU_9250_SENSOR_TYPE_ACC_Z) {
|
||||
converted_val = acc_convert(sensor_value[2]);
|
||||
}
|
||||
rv = (int)(converted_val * 100);
|
||||
} else if((type & MPU_9250_SENSOR_TYPE_GYRO) != 0) {
|
||||
t0 = RTIMER_NOW();
|
||||
|
||||
while(!int_status() &&
|
||||
(RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + READING_WAIT_TIMEOUT)));
|
||||
|
||||
rv = gyro_read(sensor_value);
|
||||
|
||||
if(rv == 0) {
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
PRINTF("MPU: Gyro = 0x%04x 0x%04x 0x%04x = ",
|
||||
sensor_value[0], sensor_value[1], sensor_value[2]);
|
||||
|
||||
if(type == MPU_9250_SENSOR_TYPE_GYRO_X) {
|
||||
converted_val = gyro_convert(sensor_value[0]);
|
||||
} else if(type == MPU_9250_SENSOR_TYPE_GYRO_Y) {
|
||||
converted_val = gyro_convert(sensor_value[1]);
|
||||
} else if(type == MPU_9250_SENSOR_TYPE_GYRO_Z) {
|
||||
converted_val = gyro_convert(sensor_value[2]);
|
||||
}
|
||||
rv = (int)(converted_val * 100);
|
||||
} else {
|
||||
PRINTF("MPU: Invalid type\n");
|
||||
rv = CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
PRINTF("%ld\n", (long int)(converted_val * 100));
|
||||
|
||||
return rv;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the MPU9250 sensor.
|
||||
*
|
||||
* \param type Activate, enable or disable the sensor. See below
|
||||
* \param enable
|
||||
*
|
||||
* When type == SENSORS_HW_INIT we turn on the hardware
|
||||
* When type == SENSORS_ACTIVE and enable==1 we enable the sensor
|
||||
* When type == SENSORS_ACTIVE and enable==0 we disable the sensor
|
||||
*/
|
||||
static int
|
||||
configure(int type, int enable)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_HW_INIT:
|
||||
elements = MPU_9250_SENSOR_TYPE_NONE;
|
||||
break;
|
||||
case SENSORS_ACTIVE:
|
||||
if((enable & MPU_9250_SENSOR_TYPE_ACC) != 0 ||
|
||||
(enable & MPU_9250_SENSOR_TYPE_GYRO) != 0) {
|
||||
PRINTF("MPU: Enabling\n");
|
||||
elements = enable & MPU_9250_SENSOR_TYPE_ALL;
|
||||
|
||||
power_up();
|
||||
|
||||
enabled = SENSOR_STATUS_BOOTING;
|
||||
} else {
|
||||
PRINTF("MPU: Disabling\n");
|
||||
ctimer_stop(&startup_timer);
|
||||
elements = MPU_9250_SENSOR_TYPE_NONE;
|
||||
enable_sensor(0);
|
||||
while(ti_lib_i2c_master_busy(I2C0_BASE));
|
||||
enabled = SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
break;
|
||||
case MPU_9250_SENSOR_SHUTDOWN:
|
||||
ti_lib_gpio_pin_write(BOARD_MPU_POWER, 0);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return enabled;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns the status of the sensor
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return 1 if the sensor is enabled
|
||||
*/
|
||||
static int
|
||||
status(int type)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_ACTIVE:
|
||||
case SENSORS_READY:
|
||||
return enabled;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(mpu_9250_sensor, "MPU9250", value, configure, status);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
112
platform/srf06-cc26xx/sensortag/mpu-9250-sensor.h
Normal file
112
platform/srf06-cc26xx/sensortag/mpu-9250-sensor.h
Normal file
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-mpu SensorTag 2.0 Motion Processing Unit
|
||||
*
|
||||
* Driver for the Invensense MPU9250 Motion Processing Unit.
|
||||
*
|
||||
* Due to the time required between triggering a reading and the reading
|
||||
* becoming available, this driver is meant to be used in an asynchronous
|
||||
* fashion. The caller must first activate the sensor by calling
|
||||
* mpu_9250_sensor.configure(SENSORS_ACTIVE, xyz);
|
||||
* The value for the xyz arguments depends on the required readings. If the
|
||||
* caller intends to read both the accelerometer as well as the gyro then
|
||||
* xyz should be MPU_9250_SENSOR_TYPE_ALL. If the caller only needs to take a
|
||||
* reading from one of the two elements, xyz should be one of
|
||||
* MPU_9250_SENSOR_TYPE_ACC or MPU_9250_SENSOR_TYPE_GYRO
|
||||
*
|
||||
* Calling .configure() will power up the sensor and initialise it. When the
|
||||
* sensor is ready to provide readings, the driver will generate a
|
||||
* sensors_changed event.
|
||||
*
|
||||
* Calls to .status() will return the driver's state which could indicate that
|
||||
* the sensor is off, booting or on.
|
||||
*
|
||||
* Once a reading has been taken, the caller has two options:
|
||||
* - Turn the sensor off by calling SENSORS_DEACTIVATE, but in order to take
|
||||
* subsequent readings the sensor must be started up all over
|
||||
* - Leave the sensor on. In this scenario, the caller can simply keep calling
|
||||
* value() for subsequent readings, but having the sensor on will consume
|
||||
* more energy, especially if both accelerometer and the gyro are on.
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26XX Invensense MPU9250 motion processing unit
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef MPU_9250_SENSOR_H_
|
||||
#define MPU_9250_SENSOR_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* ACC / Gyro Axes */
|
||||
#define MPU_9250_SENSOR_TYPE_GYRO_Z 0x01
|
||||
#define MPU_9250_SENSOR_TYPE_GYRO_Y 0x02
|
||||
#define MPU_9250_SENSOR_TYPE_GYRO_X 0x04
|
||||
#define MPU_9250_SENSOR_TYPE_GYRO_ALL 0x07
|
||||
|
||||
#define MPU_9250_SENSOR_TYPE_ACC_Z 0x08
|
||||
#define MPU_9250_SENSOR_TYPE_ACC_Y 0x10
|
||||
#define MPU_9250_SENSOR_TYPE_ACC_X 0x20
|
||||
#define MPU_9250_SENSOR_TYPE_ACC_ALL 0x38
|
||||
|
||||
#define MPU_9250_SENSOR_TYPE_MASK 0x3F
|
||||
#define MPU_9250_SENSOR_TYPE_ACC 0x38
|
||||
#define MPU_9250_SENSOR_TYPE_GYRO 0x07
|
||||
|
||||
#define MPU_9250_SENSOR_TYPE_NONE 0
|
||||
#define MPU_9250_SENSOR_TYPE_ALL (MPU_9250_SENSOR_TYPE_ACC | \
|
||||
MPU_9250_SENSOR_TYPE_GYRO)
|
||||
|
||||
#define MPU_9250_SENSOR_SHUTDOWN 0xFF
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Accelerometer range */
|
||||
#define MPU_9250_SENSOR_ACC_RANGE_2G 0
|
||||
#define MPU_9250_SENSOR_ACC_RANGE_4G 1
|
||||
#define MPU_9250_SENSOR_ACC_RANGE_8G 2
|
||||
#define MPU_9250_SENSOR_ACC_RANGE_16G 3
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Accelerometer range configuration */
|
||||
#ifdef MPU_9250_SENSOR_CONF_ACC_RANGE
|
||||
#define MPU_9250_SENSOR_ACC_RANGE MPU_9250_SENSOR_CONF_ACC_RANGE
|
||||
#else
|
||||
#define MPU_9250_SENSOR_ACC_RANGE MPU_9250_SENSOR_ACC_RANGE_2G
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
extern const struct sensors_sensor mpu_9250_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* MPU_9250_SENSOR_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
273
platform/srf06-cc26xx/sensortag/opt-3001-sensor.c
Normal file
273
platform/srf06-cc26xx/sensortag/opt-3001-sensor.c
Normal file
|
|
@ -0,0 +1,273 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-opt-sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26xx Opt3001 light sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "opt-3001-sensor.h"
|
||||
#include "sys/ctimer.h"
|
||||
#include "ti-lib.h"
|
||||
#include "board-i2c.h"
|
||||
#include "sensor-common.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
#include <math.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Slave address */
|
||||
#define OPT3001_I2C_ADDRESS 0x45
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Register addresses */
|
||||
#define REG_RESULT 0x00
|
||||
#define REG_CONFIGURATION 0x01
|
||||
#define REG_LOW_LIMIT 0x02
|
||||
#define REG_HIGH_LIMIT 0x03
|
||||
|
||||
#define REG_MANUFACTURER_ID 0x7E
|
||||
#define REG_DEVICE_ID 0x7F
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Register values */
|
||||
#define MANUFACTURER_ID 0x5449 /* TI */
|
||||
#define DEVICE_ID 0x3001 /* Opt 3001 */
|
||||
#define CONFIG_RESET 0xC810
|
||||
#define CONFIG_TEST 0xCC10
|
||||
#define CONFIG_ENABLE 0x10CC /* 0xCC10 */
|
||||
#define CONFIG_DISABLE 0x108C /* 0xC810 */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Bit values */
|
||||
#define DATA_RDY_BIT 0x0080 /* Data ready */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Register length */
|
||||
#define REGISTER_LENGTH 2
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Sensor data size */
|
||||
#define DATA_LENGTH 2
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define SENSOR_STATUS_DISABLED 0
|
||||
#define SENSOR_STATUS_NOT_READY 1
|
||||
#define SENSOR_STATUS_ENABLED 2
|
||||
|
||||
static int enabled = SENSOR_STATUS_DISABLED;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Wait SENSOR_STARTUP_DELAY for the sensor to be ready - 125ms */
|
||||
#define SENSOR_STARTUP_DELAY (CLOCK_SECOND >> 3)
|
||||
|
||||
static struct ctimer startup_timer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
notify_ready(void *not_used)
|
||||
{
|
||||
enabled = SENSOR_STATUS_ENABLED;
|
||||
sensors_changed(&opt_3001_sensor);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Select the sensor on the I2C bus
|
||||
*/
|
||||
static void
|
||||
select(void)
|
||||
{
|
||||
/* Select slave and set clock rate */
|
||||
board_i2c_select(BOARD_I2C_INTERFACE_0, OPT3001_I2C_ADDRESS);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Turn the sensor on/off
|
||||
* \param enable TRUE: on, FALSE: off
|
||||
*/
|
||||
static void
|
||||
enable_sensor(bool enable)
|
||||
{
|
||||
uint16_t val;
|
||||
|
||||
select();
|
||||
|
||||
if(enable) {
|
||||
val = CONFIG_ENABLE;
|
||||
} else {
|
||||
val = CONFIG_DISABLE;
|
||||
}
|
||||
|
||||
sensor_common_write_reg(REG_CONFIGURATION, (uint8_t *)&val, REGISTER_LENGTH);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Read the result register
|
||||
* \param raw_data Pointer to a buffer to store the reading
|
||||
* \return TRUE if valid data
|
||||
*/
|
||||
static bool
|
||||
read_data(uint16_t *raw_data)
|
||||
{
|
||||
bool success;
|
||||
uint16_t val;
|
||||
|
||||
select();
|
||||
|
||||
success = sensor_common_read_reg(REG_CONFIGURATION, (uint8_t *)&val,
|
||||
REGISTER_LENGTH);
|
||||
|
||||
if(success) {
|
||||
success = (val & DATA_RDY_BIT) == DATA_RDY_BIT;
|
||||
}
|
||||
|
||||
if(success) {
|
||||
success = sensor_common_read_reg(REG_RESULT, (uint8_t *)&val, DATA_LENGTH);
|
||||
}
|
||||
|
||||
if(success) {
|
||||
/* Swap bytes */
|
||||
*raw_data = (val << 8) | (val >> 8 & 0xFF);
|
||||
} else {
|
||||
sensor_common_set_error_data((uint8_t *)raw_data, DATA_LENGTH);
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Convert raw data to a value in lux
|
||||
* \param data Pointer to a buffer with a raw sensor reading
|
||||
* \return Converted value (lux)
|
||||
*/
|
||||
static float
|
||||
convert(uint16_t raw_data)
|
||||
{
|
||||
uint16_t e, m;
|
||||
|
||||
m = raw_data & 0x0FFF;
|
||||
e = (raw_data & 0xF000) >> 12;
|
||||
|
||||
return m * (0.01 * exp2(e));
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns a reading from the sensor
|
||||
* \param type Ignored
|
||||
* \return Illuminance in centilux
|
||||
*/
|
||||
static int
|
||||
value(int type)
|
||||
{
|
||||
int rv;
|
||||
uint16_t raw_val;
|
||||
float converted_val;
|
||||
|
||||
if(enabled != SENSOR_STATUS_ENABLED) {
|
||||
PRINTF("Sensor disabled or starting up (%d)\n", enabled);
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
rv = read_data(&raw_val);
|
||||
|
||||
if(rv == 0) {
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
converted_val = convert(raw_val);
|
||||
PRINTF("OPT: %04X r=%d (centilux)\n", raw_val,
|
||||
(int)(converted_val * 100));
|
||||
|
||||
rv = (int)(converted_val * 100);
|
||||
|
||||
return rv;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the OPT3001 sensor.
|
||||
*
|
||||
* \param type Activate, enable or disable the sensor. See below
|
||||
* \param enable
|
||||
*
|
||||
* When type == SENSORS_HW_INIT we turn on the hardware
|
||||
* When type == SENSORS_ACTIVE and enable==1 we enable the sensor
|
||||
* When type == SENSORS_ACTIVE and enable==0 we disable the sensor
|
||||
*/
|
||||
static int
|
||||
configure(int type, int enable)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_HW_INIT:
|
||||
break;
|
||||
case SENSORS_ACTIVE:
|
||||
if(enable) {
|
||||
enable_sensor(1);
|
||||
ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, notify_ready, NULL);
|
||||
enabled = SENSOR_STATUS_NOT_READY;
|
||||
} else {
|
||||
ctimer_stop(&startup_timer);
|
||||
enable_sensor(0);
|
||||
enabled = SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return enabled;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns the status of the sensor
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return 1 if the sensor is enabled
|
||||
*/
|
||||
static int
|
||||
status(int type)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_ACTIVE:
|
||||
case SENSORS_READY:
|
||||
return enabled;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(opt_3001_sensor, "OPT3001", value, configure, status);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
67
platform/srf06-cc26xx/sensortag/opt-3001-sensor.h
Normal file
67
platform/srf06-cc26xx/sensortag/opt-3001-sensor.h
Normal file
|
|
@ -0,0 +1,67 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-opt-sensor SensorTag 2.0 Light Sensor
|
||||
*
|
||||
* Due to the time required for the sensor to startup, this driver is meant to
|
||||
* be used in an asynchronous fashion. The caller must first activate the
|
||||
* sensor by calling SENSORS_ACTIVATE(). This will trigger the sensor's startup
|
||||
* sequence, but the call will not wait for it to complete so that the CPU can
|
||||
* perform other tasks or drop to a low power mode.
|
||||
*
|
||||
* Once the sensor is stable, the driver will generate a sensors_changed event.
|
||||
*
|
||||
* Once a reading has been taken, the caller has two options:
|
||||
* - Turn the sensor off by calling SENSORS_DEACTIVATE, but in order to take
|
||||
* subsequent readings SENSORS_ACTIVATE must be called again
|
||||
* - Leave the sensor on. In this scenario, the caller can simply keep calling
|
||||
* value() for subsequent readings, but having the sensor on will consume
|
||||
* energy
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx Opt3001 light sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef OPT_3001_SENSOR_H_
|
||||
#define OPT_3001_SENSOR_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
extern const struct sensors_sensor opt_3001_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* OPT_3001_SENSOR_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
140
platform/srf06-cc26xx/sensortag/reed-relay.c
Normal file
140
platform/srf06-cc26xx/sensortag/reed-relay.c
Normal file
|
|
@ -0,0 +1,140 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-reed-relay
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26XX Reed Relay
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki.h"
|
||||
#include "sys/clock.h"
|
||||
#include "sys/timer.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "sensortag/reed-relay.h"
|
||||
#include "gpio-interrupt.h"
|
||||
#include "sys/timer.h"
|
||||
|
||||
#include "ti-lib.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static struct timer debouncetimer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define REED_ISR_CFG (IOC_CURRENT_2MA | IOC_STRENGTH_AUTO | \
|
||||
IOC_IOPULL_DOWN | IOC_SLEW_DISABLE | \
|
||||
IOC_HYST_DISABLE | IOC_BOTH_EDGES | \
|
||||
IOC_INT_DISABLE | IOC_IOMODE_NORMAL | \
|
||||
IOC_NO_WAKE_UP | IOC_INPUT_ENABLE | \
|
||||
IOC_JTAG_DISABLE)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Handler for Sensortag-CC26XX reed interrupts
|
||||
*/
|
||||
static void
|
||||
reed_interrupt_handler(uint8_t ioid)
|
||||
{
|
||||
if(!timer_expired(&debouncetimer)) {
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
return;
|
||||
}
|
||||
|
||||
sensors_changed(&reed_relay_sensor);
|
||||
timer_set(&debouncetimer, CLOCK_SECOND / 2);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
value(int type)
|
||||
{
|
||||
return (int)ti_lib_gpio_pin_read(1 << BOARD_IOID_REED_RELAY);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the button sensor for all buttons.
|
||||
*
|
||||
* \param type SENSORS_HW_INIT: Initialise. SENSORS_ACTIVE: Enables/Disables
|
||||
* depending on 'value'
|
||||
* \param value 0: disable, non-zero: enable
|
||||
* \return Always returns 1
|
||||
*/
|
||||
static int
|
||||
configure(int type, int value)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_HW_INIT:
|
||||
ti_lib_ioc_int_disable(BOARD_IOID_REED_RELAY);
|
||||
ti_lib_gpio_event_clear(1 << BOARD_IOID_REED_RELAY);
|
||||
|
||||
/* Enabled the GPIO clock when the CM3 is running */
|
||||
ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_GPIO);
|
||||
ti_lib_ioc_port_configure_set(BOARD_IOID_REED_RELAY, IOC_PORT_GPIO,
|
||||
REED_ISR_CFG);
|
||||
|
||||
gpio_interrupt_register_handler(BOARD_IOID_REED_RELAY,
|
||||
reed_interrupt_handler);
|
||||
break;
|
||||
case SENSORS_ACTIVE:
|
||||
if(value) {
|
||||
ti_lib_ioc_int_enable(BOARD_IOID_REED_RELAY);
|
||||
} else {
|
||||
ti_lib_ioc_int_disable(BOARD_IOID_REED_RELAY);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Status function for the reed
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return 1 Interrupt enabled, 0: Disabled
|
||||
*/
|
||||
static int
|
||||
status(int type)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_ACTIVE:
|
||||
case SENSORS_READY:
|
||||
return (ti_lib_ioc_port_configure_get(BOARD_IOID_REED_RELAY)
|
||||
& IOC_INT_ENABLE) == IOC_INT_ENABLE;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(reed_relay_sensor, "REED", value, configure, status);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
59
platform/srf06-cc26xx/sensortag/reed-relay.h
Normal file
59
platform/srf06-cc26xx/sensortag/reed-relay.h
Normal file
|
|
@ -0,0 +1,59 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-reed-relay SensorTag 2.0 Reed Relay
|
||||
*
|
||||
* The reed relay acts like a button without a button. To trigger the reed,
|
||||
* approach a magnet to the sensortag and a sensors_changed event will be
|
||||
* generated, in a fashion similar to as if a button had been pressed
|
||||
*
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26XX Reed Relay
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef REED_RELAY_H
|
||||
#define REED_RELAY_H
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "lib/sensors.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
extern const struct sensors_sensor reed_relay_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* REED_RELAY_H */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
79
platform/srf06-cc26xx/sensortag/sensor-common.c
Normal file
79
platform/srf06-cc26xx/sensortag/sensor-common.c
Normal file
|
|
@ -0,0 +1,79 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-sensor-common
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Utilities common among SensorTag sensors
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "sensor-common.h"
|
||||
#include "board-i2c.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Data to use when an error occurs */
|
||||
#define ERROR_DATA 0xCC
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static uint8_t buffer[32];
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
sensor_common_read_reg(uint8_t addr, uint8_t *buf, uint8_t len)
|
||||
{
|
||||
return board_i2c_write_read(&addr, 1, buf, len);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
bool
|
||||
sensor_common_write_reg(uint8_t addr, uint8_t *buf, uint8_t len)
|
||||
{
|
||||
uint8_t i;
|
||||
uint8_t *p = buffer;
|
||||
|
||||
/* Copy address and data to local buffer for burst write */
|
||||
*p++ = addr;
|
||||
for(i = 0; i < len; i++) {
|
||||
*p++ = *buf++;
|
||||
}
|
||||
len++;
|
||||
|
||||
/* Send data */
|
||||
return board_i2c_write(buffer, len);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
sensor_common_set_error_data(uint8_t *buf, uint8_t len)
|
||||
{
|
||||
while(len > 0) {
|
||||
len--;
|
||||
buf[len] = ERROR_DATA;
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
85
platform/srf06-cc26xx/sensortag/sensor-common.h
Normal file
85
platform/srf06-cc26xx/sensortag/sensor-common.h
Normal file
|
|
@ -0,0 +1,85 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-sensor-common SensorTag 2.0 Sensors
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx Common sensor utilities
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef SENSOR_H
|
||||
#define SENSOR_H
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "board-i2c.h"
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Reads a sensor's register over I2C
|
||||
* \param addr The address of the register to read
|
||||
* \param buf Pointer to buffer to place data
|
||||
* \param len Number of bytes to read
|
||||
* \return TRUE if the required number of bytes are received
|
||||
*
|
||||
* The sensor must be selected before this routine is called.
|
||||
*/
|
||||
bool sensor_common_read_reg(uint8_t addr, uint8_t *buf, uint8_t len);
|
||||
|
||||
/**
|
||||
* \brief Write to a sensor's register over I2C
|
||||
* \param addr The address of the register to read
|
||||
* \param buf Pointer to buffer containing data to be written
|
||||
* \param len Number of bytes to write
|
||||
* \return TRUE if successful write
|
||||
*
|
||||
* The sensor must be selected before this routine is called.
|
||||
*/
|
||||
bool sensor_common_write_reg(uint8_t addr, uint8_t *buf, uint8_t len);
|
||||
|
||||
/**
|
||||
* \brief Fill a result buffer with dummy error data
|
||||
* \param buf Pointer to the buffer where to write the data
|
||||
* \param len Number of bytes to fill
|
||||
* \return bitmask of error flags
|
||||
*/
|
||||
void sensor_common_set_error_data(uint8_t *buf, uint8_t len);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* SENSOR_H */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
55
platform/srf06-cc26xx/sensortag/sensortag-sensors.c
Normal file
55
platform/srf06-cc26xx/sensortag/sensortag-sensors.c
Normal file
|
|
@ -0,0 +1,55 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Generic module controlling sensors on CC26XX Sensortag
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki.h"
|
||||
#include "sensortag/button-sensor.h"
|
||||
#include "sensortag/bmp-280-sensor.h"
|
||||
#include "sensortag/tmp-007-sensor.h"
|
||||
#include "sensortag/opt-3001-sensor.h"
|
||||
#include "sensortag/sht-21-sensor.h"
|
||||
#include "sensortag/mpu-9250-sensor.h"
|
||||
#include "sensortag/reed-relay.h"
|
||||
|
||||
#include <string.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Exports a global symbol to be used by the sensor API */
|
||||
SENSORS(&button_left_sensor, &button_right_sensor,
|
||||
&bmp_280_sensor, &tmp_007_sensor, &opt_3001_sensor, &sht_21_sensor,
|
||||
&mpu_9250_sensor, &reed_relay_sensor);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
386
platform/srf06-cc26xx/sensortag/sht-21-sensor.c
Normal file
386
platform/srf06-cc26xx/sensortag/sht-21-sensor.c
Normal file
|
|
@ -0,0 +1,386 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-sht-sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26xx Sensirion SHT21 Humidity sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "sys/ctimer.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "sht-21-sensor.h"
|
||||
#include "sensor-common.h"
|
||||
#include "board-i2c.h"
|
||||
|
||||
#include "ti-lib.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Sensor I2C address */
|
||||
#define HAL_SHT21_I2C_ADDRESS 0x40
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define S_REG_LEN 2
|
||||
#define DATA_LEN 3
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Internal commands */
|
||||
#define SHT21_CMD_TEMP_T_NH 0xF3 /* command trig. temp meas. no hold master */
|
||||
#define SHT21_CMD_HUMI_T_NH 0xF5 /* command trig. humidity meas. no hold master */
|
||||
#define SHT21_CMD_WRITE_U_R 0xE6 /* command write user register */
|
||||
#define SHT21_CMD_READ_U_R 0xE7 /* command read user register */
|
||||
#define SHT21_CMD_SOFT_RST 0xFE /* command soft reset */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define HUMIDITY 0x00
|
||||
#define TEMPERATURE 0x01
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define USR_REG_MASK 0x38 /* Mask off reserved bits (3,4,5) */
|
||||
#define USR_REG_DEFAULT 0x02 /* Disable OTP reload */
|
||||
#define USR_REG_RES_MASK 0x7E /* Only change bits 0 and 7 (meas. res.) */
|
||||
#define USR_REG_11BITRES 0x81 /* 11-bit resolution */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define USR_REG_TEST_VAL 0x83
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DATA_SIZE 6
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static uint8_t usr; /* User register value */
|
||||
static uint8_t buf[DATA_SIZE]; /* Data buffer */
|
||||
static bool success;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int enabled = SHT_21_SENSOR_STATUS_DISABLED;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Maximum measurement durations in clock ticks. We use 11bit resolution, thus:
|
||||
* - Tmp: 11ms
|
||||
* - RH: 15ms
|
||||
*/
|
||||
#define MEASUREMENT_DURATION 3
|
||||
|
||||
/*
|
||||
* Wait SENSOR_STARTUP_DELAY clock ticks between activation and triggering a
|
||||
* reading
|
||||
*/
|
||||
#define SENSOR_STARTUP_DELAY 4
|
||||
|
||||
static struct ctimer startup_timer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Select the SHT sensor on the I2C-bus
|
||||
*/
|
||||
static void
|
||||
select(void)
|
||||
{
|
||||
/* Select the SHT21 address */
|
||||
board_i2c_select(BOARD_I2C_INTERFACE_0, HAL_SHT21_I2C_ADDRESS);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Write a command over I2C
|
||||
* \param cmd The command to send
|
||||
* \return TRUE if the command was sent successfully
|
||||
*/
|
||||
static bool
|
||||
write_cmd(uint8_t cmd)
|
||||
{
|
||||
/* Send command */
|
||||
return board_i2c_write_single(cmd);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* \brief Read data from the SHT over I2C
|
||||
* \param buf Pointer to buffer where data will be stored
|
||||
* \param len Number of bytes to read
|
||||
* \return TRUE if the required number of bytes were received
|
||||
*/
|
||||
static bool
|
||||
read_data(uint8_t *buf, uint8_t len)
|
||||
{
|
||||
/* Read data */
|
||||
return board_i2c_read(buf, len);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Initialise the SHT21 sensor
|
||||
*/
|
||||
static void
|
||||
sensor_init(void)
|
||||
{
|
||||
select();
|
||||
|
||||
/* Set 11 bit resolution */
|
||||
sensor_common_read_reg(SHT21_CMD_READ_U_R, &usr, 1);
|
||||
usr &= USR_REG_RES_MASK;
|
||||
usr |= USR_REG_11BITRES;
|
||||
sensor_common_write_reg(SHT21_CMD_WRITE_U_R, &usr, 1);
|
||||
success = true;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Start a temperature measurement
|
||||
*/
|
||||
static void
|
||||
start_temp(void)
|
||||
{
|
||||
if(success) {
|
||||
select();
|
||||
success = write_cmd(SHT21_CMD_TEMP_T_NH);
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Latch the last temperature measurement
|
||||
*/
|
||||
static void
|
||||
latch_temp(void)
|
||||
{
|
||||
if(success) {
|
||||
select();
|
||||
success = read_data(buf, DATA_LEN);
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Start a humidity measurement
|
||||
*/
|
||||
static void
|
||||
start_humidity(void)
|
||||
{
|
||||
if(success) {
|
||||
select();
|
||||
success = write_cmd(SHT21_CMD_HUMI_T_NH);
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Latch the last humidity measurement
|
||||
*/
|
||||
static void
|
||||
latch_humidity(void)
|
||||
{
|
||||
if(success) {
|
||||
select();
|
||||
success = read_data(buf + DATA_LEN, DATA_LEN);
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Retrieve latched raw readings from buffer and store in variables
|
||||
* \param raw_temp Pointer to a buffer where the temperature reading will be
|
||||
* stored
|
||||
* \param raw_hum Pointer to a buffer where the humidity reading will be
|
||||
* stored
|
||||
* \return TRUE on success
|
||||
*/
|
||||
static bool
|
||||
get_readings(uint16_t *raw_temp, uint16_t *raw_hum)
|
||||
{
|
||||
bool valid;
|
||||
|
||||
valid = success;
|
||||
if(!success) {
|
||||
sensor_common_set_error_data(buf, DATA_SIZE);
|
||||
}
|
||||
|
||||
/* Store temperature */
|
||||
*raw_temp = buf[0] << 8 | buf[1];
|
||||
|
||||
/* [2] We ignore the CRC */
|
||||
|
||||
/* Store humidity */
|
||||
*raw_hum = buf[3] << 8 | buf[4];
|
||||
|
||||
/* [5] We ignore the CRC */
|
||||
|
||||
success = true;
|
||||
|
||||
return valid;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Convert raw data to temperature (degrees C) and rel. humidity (%RH)
|
||||
* \param raw_temp Raw temperature data (little endian)
|
||||
* \param raw_hum Raw humidity data (little endian)
|
||||
* \param temp Converted temperature value
|
||||
* \param hum Converted humidity value
|
||||
*/
|
||||
static void
|
||||
convert(uint16_t raw_temp, uint16_t raw_hum, float *temp, float *hum)
|
||||
{
|
||||
/* Convert temperature to degrees C */
|
||||
raw_temp &= ~0x0003; /* clear bits [1..0] (status bits) */
|
||||
*temp = -46.85 + 175.72 / 65536 * (double)(int16_t)raw_temp;
|
||||
|
||||
/* Convert relative humidity to a %RH value */
|
||||
raw_hum &= ~0x0003; /* clear bits [1..0] (status bits) */
|
||||
|
||||
/* RH= -6 + 125 * SRH / 2^16 */
|
||||
*hum = -6.0 + 125.0 / 65536 * (double)raw_hum;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
state_machine(void *not_used)
|
||||
{
|
||||
switch(enabled) {
|
||||
case SHT_21_SENSOR_STATUS_INITIALISED:
|
||||
start_temp();
|
||||
enabled = SHT_21_SENSOR_STATUS_READING_TEMP;
|
||||
break;
|
||||
case SHT_21_SENSOR_STATUS_READING_TEMP:
|
||||
latch_temp();
|
||||
start_humidity();
|
||||
enabled = SHT_21_SENSOR_STATUS_READING_HUMIDITY;
|
||||
break;
|
||||
case SHT_21_SENSOR_STATUS_READING_HUMIDITY:
|
||||
latch_humidity();
|
||||
enabled = SHT_21_SENSOR_STATUS_READINGS_READY;
|
||||
sensors_changed(&sht_21_sensor);
|
||||
return;
|
||||
case SHT_21_SENSOR_STATUS_READINGS_READY:
|
||||
case SHT_21_SENSOR_STATUS_DISABLED:
|
||||
default:
|
||||
ctimer_stop(&startup_timer);
|
||||
return;
|
||||
}
|
||||
|
||||
ctimer_set(&startup_timer, MEASUREMENT_DURATION, state_machine, NULL);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns a reading from the sensor
|
||||
* \param type SHT_21_SENSOR_TYPE_TEMP or SHT_21_SENSOR_TYPE_HUMIDITY
|
||||
* \return Temperature (centi degrees C) or Humidity (centi %RH)
|
||||
*/
|
||||
static int
|
||||
value(int type)
|
||||
{
|
||||
int rv;
|
||||
uint16_t raw_temp;
|
||||
uint16_t raw_hum;
|
||||
float temp;
|
||||
float hum;
|
||||
|
||||
if(enabled != SHT_21_SENSOR_STATUS_READINGS_READY) {
|
||||
PRINTF("Sensor disabled or starting up (%d)\n", enabled);
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
if((type != SHT_21_SENSOR_TYPE_TEMP) && type != SHT_21_SENSOR_TYPE_HUMIDITY) {
|
||||
PRINTF("Invalid type\n");
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
} else {
|
||||
rv = get_readings(&raw_temp, &raw_hum);
|
||||
|
||||
if(rv == 0) {
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
convert(raw_temp, raw_hum, &temp, &hum);
|
||||
PRINTF("SHT: %04X %04X t=%d h=%d\n", raw_temp, raw_hum,
|
||||
(int)(temp * 100), (int)(hum * 100));
|
||||
|
||||
if(type == SHT_21_SENSOR_TYPE_TEMP) {
|
||||
rv = (int)(temp * 100);
|
||||
} else if(type == SHT_21_SENSOR_TYPE_HUMIDITY) {
|
||||
rv = (int)(hum * 100);
|
||||
}
|
||||
}
|
||||
return rv;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the SHT21 sensor.
|
||||
*
|
||||
* \param type Activate, enable or disable the sensor. See below
|
||||
* \param enable
|
||||
*
|
||||
* When type == SENSORS_HW_INIT we turn on the hardware
|
||||
* When type == SENSORS_ACTIVE and enable==1 we enable the sensor
|
||||
* When type == SENSORS_ACTIVE and enable==0 we disable the sensor
|
||||
*/
|
||||
static int
|
||||
configure(int type, int enable)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_HW_INIT:
|
||||
sensor_init();
|
||||
enabled = SHT_21_SENSOR_STATUS_INITIALISED;
|
||||
break;
|
||||
case SENSORS_ACTIVE:
|
||||
/* Must be initialised first */
|
||||
if(enabled == SHT_21_SENSOR_STATUS_DISABLED) {
|
||||
return SHT_21_SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
if(enable) {
|
||||
enabled = SHT_21_SENSOR_STATUS_INITIALISED;
|
||||
ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, state_machine, NULL);
|
||||
} else {
|
||||
ctimer_stop(&startup_timer);
|
||||
enabled = SHT_21_SENSOR_STATUS_INITIALISED;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return enabled;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns the status of the sensor
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return One of the SENSOR_STATUS_xyz defines
|
||||
*/
|
||||
static int
|
||||
status(int type)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_ACTIVE:
|
||||
case SENSORS_READY:
|
||||
return enabled;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return SHT_21_SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(sht_21_sensor, "SHT21", value, configure, status);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
85
platform/srf06-cc26xx/sensortag/sht-21-sensor.h
Normal file
85
platform/srf06-cc26xx/sensortag/sht-21-sensor.h
Normal file
|
|
@ -0,0 +1,85 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-sht-sensor SensorTag 2.0 Humidity Sensor
|
||||
*
|
||||
* Due to the time required between triggering a reading and the reading
|
||||
* becoming available, this driver is meant to be used in an asynchronous
|
||||
* fashion. The caller must first activate the sensor by calling
|
||||
* SENSORS_ACTIVATE(). This will trigger a cycle which will read both
|
||||
* temperature and humidity, but the call will not wait for the cycle to
|
||||
* complete so that the CPU can perform other tasks or drop to a low power
|
||||
* mode.
|
||||
*
|
||||
* Once readings are available, the driver will generate a sensors_changed
|
||||
* event.
|
||||
*
|
||||
* Calls to .status() will return the driver's state which could indicate that
|
||||
* a measurement is in progress (different return values for each) or that
|
||||
* readings are ready.
|
||||
*
|
||||
* Multiple calls to value() will simply return the reading that was latched
|
||||
* after the last cycle. In order to obtain fresh readings, a new cycle must be
|
||||
* started by a new call to SENSORS_ACTIVATE.
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26ss Sensirion SHT21 Humidity sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef SHT_21_SENSOR_H_
|
||||
#define SHT_21_SENSOR_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define SHT_21_SENSOR_TYPE_TEMP 1
|
||||
#define SHT_21_SENSOR_TYPE_HUMIDITY 2
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name SHT21 driver states
|
||||
* @{
|
||||
*/
|
||||
#define SHT_21_SENSOR_STATUS_DISABLED 0 /**< Not initialised */
|
||||
#define SHT_21_SENSOR_STATUS_INITIALISED 1 /**< Initialised but idle */
|
||||
#define SHT_21_SENSOR_STATUS_READING_TEMP 2 /**< Temp reading in progress */
|
||||
#define SHT_21_SENSOR_STATUS_READING_HUMIDITY 3 /**< Humidity reading in progress */
|
||||
#define SHT_21_SENSOR_STATUS_READINGS_READY 4 /**< Both readings ready */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
extern const struct sensors_sensor sht_21_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* SHT_21_SENSOR_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
315
platform/srf06-cc26xx/sensortag/tmp-007-sensor.c
Normal file
315
platform/srf06-cc26xx/sensortag/tmp-007-sensor.c
Normal file
|
|
@ -0,0 +1,315 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-tmp-sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26xx TI TMP007 infrared thermophile sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "tmp-007-sensor.h"
|
||||
#include "sys/ctimer.h"
|
||||
#include "board-i2c.h"
|
||||
#include "sensor-common.h"
|
||||
#include "ti-lib.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
#include <math.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Slave address */
|
||||
#define SENSOR_I2C_ADDRESS 0x44
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* TMP007 register addresses */
|
||||
#define TMP007_REG_ADDR_VOLTAGE 0x00
|
||||
#define TMP007_REG_ADDR_LOCAL_TEMP 0x01
|
||||
#define TMP007_REG_ADDR_CONFIG 0x02
|
||||
#define TMP007_REG_ADDR_OBJ_TEMP 0x03
|
||||
#define TMP007_REG_ADDR_STATUS 0x04
|
||||
#define TMP007_REG_PROD_ID 0x1F
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* TMP007 register values */
|
||||
#define TMP007_VAL_CONFIG_ON 0x1000 /* Sensor on state */
|
||||
#define TMP007_VAL_CONFIG_OFF 0x0000 /* Sensor off state */
|
||||
#define TMP007_VAL_CONFIG_RESET 0x8000
|
||||
#define TMP007_VAL_PROD_ID 0x0078 /* Product ID */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Conversion ready (status register) bit values */
|
||||
#define CONV_RDY_BIT 0x4000
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Register length */
|
||||
#define REGISTER_LENGTH 2
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Sensor data size */
|
||||
#define DATA_SIZE 4
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Byte swap of 16-bit register value */
|
||||
#define HI_UINT16(a) (((a) >> 8) & 0xFF)
|
||||
#define LO_UINT16(a) ((a) & 0xFF)
|
||||
|
||||
#define SWAP(v) ((LO_UINT16(v) << 8) | HI_UINT16(v))
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define SELECT() board_i2c_select(BOARD_I2C_INTERFACE_0, SENSOR_I2C_ADDRESS);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static uint8_t buf[DATA_SIZE];
|
||||
static uint16_t val;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define SENSOR_STATUS_DISABLED 0
|
||||
#define SENSOR_STATUS_INITIALISED 1
|
||||
#define SENSOR_STATUS_NOT_READY 2
|
||||
#define SENSOR_STATUS_READY 3
|
||||
|
||||
static int enabled = SENSOR_STATUS_DISABLED;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Wait SENSOR_STARTUP_DELAY clock ticks for the sensor to be ready - 275ms */
|
||||
#define SENSOR_STARTUP_DELAY 36
|
||||
|
||||
static struct ctimer startup_timer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Latched values */
|
||||
static int obj_temp_latched;
|
||||
static int amb_temp_latched;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
notify_ready(void *not_used)
|
||||
{
|
||||
enabled = SENSOR_STATUS_READY;
|
||||
sensors_changed(&tmp_007_sensor);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Turn the sensor on/off
|
||||
*/
|
||||
static bool
|
||||
enable_sensor(bool enable)
|
||||
{
|
||||
bool success;
|
||||
|
||||
SELECT()
|
||||
|
||||
if(enable) {
|
||||
val = TMP007_VAL_CONFIG_ON;
|
||||
} else {
|
||||
val = TMP007_VAL_CONFIG_OFF;
|
||||
}
|
||||
val = SWAP(val);
|
||||
|
||||
success = sensor_common_write_reg(TMP007_REG_ADDR_CONFIG, (uint8_t *)&val,
|
||||
REGISTER_LENGTH);
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Read the sensor value registers
|
||||
* \param raw_temp Temperature in 16 bit format
|
||||
* \param raw_obj_temp object temperature in 16 bit format
|
||||
* \return TRUE if valid data could be retrieved
|
||||
*/
|
||||
static bool
|
||||
read_data(uint16_t *raw_temp, uint16_t *raw_obj_temp)
|
||||
{
|
||||
bool success;
|
||||
|
||||
SELECT();
|
||||
|
||||
success = sensor_common_read_reg(TMP007_REG_ADDR_STATUS, (uint8_t *)&val,
|
||||
REGISTER_LENGTH);
|
||||
|
||||
if(success) {
|
||||
val = SWAP(val);
|
||||
success = val & CONV_RDY_BIT;
|
||||
}
|
||||
|
||||
if(success) {
|
||||
success = sensor_common_read_reg(TMP007_REG_ADDR_LOCAL_TEMP, &buf[0],
|
||||
REGISTER_LENGTH);
|
||||
if(success) {
|
||||
success = sensor_common_read_reg(TMP007_REG_ADDR_OBJ_TEMP, &buf[2],
|
||||
REGISTER_LENGTH);
|
||||
}
|
||||
}
|
||||
|
||||
if(!success) {
|
||||
sensor_common_set_error_data(buf, 4);
|
||||
}
|
||||
|
||||
/* Swap byte order */
|
||||
*raw_temp = buf[0] << 8 | buf[1];
|
||||
*raw_obj_temp = buf[2] << 8 | buf[3];
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Convert raw data to values in degrees C
|
||||
* \param raw_temp raw ambient temperature from sensor
|
||||
* \param raw_obj_temp raw object temperature from sensor
|
||||
* \param obj converted object temperature
|
||||
* \param amb converted ambient temperature
|
||||
*/
|
||||
static void
|
||||
convert(uint16_t raw_temp, uint16_t raw_obj_temp, float *obj, float *amb)
|
||||
{
|
||||
const float SCALE_LSB = 0.03125;
|
||||
float t;
|
||||
int it;
|
||||
|
||||
it = (int)((raw_obj_temp) >> 2);
|
||||
t = ((float)(it)) * SCALE_LSB;
|
||||
*obj = t;
|
||||
|
||||
it = (int)((raw_temp) >> 2);
|
||||
t = (float)it;
|
||||
*amb = t * SCALE_LSB;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns a reading from the sensor
|
||||
* \param type TMP_007_SENSOR_TYPE_OBJECT or TMP_007_SENSOR_TYPE_AMBIENT
|
||||
* \return Object or Ambient temperature in milli degrees C
|
||||
*/
|
||||
static int
|
||||
value(int type)
|
||||
{
|
||||
int rv;
|
||||
uint16_t raw_temp;
|
||||
uint16_t raw_obj_temp;
|
||||
float obj_temp;
|
||||
float amb_temp;
|
||||
|
||||
if(enabled != SENSOR_STATUS_READY) {
|
||||
PRINTF("Sensor disabled or starting up (%d)\n", enabled);
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
if((type & TMP_007_SENSOR_TYPE_ALL) == 0) {
|
||||
PRINTF("Invalid type\n");
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
rv = CC26XX_SENSOR_READING_ERROR;
|
||||
|
||||
if(type == TMP_007_SENSOR_TYPE_ALL) {
|
||||
rv = read_data(&raw_temp, &raw_obj_temp);
|
||||
|
||||
if(rv == 0) {
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
convert(raw_temp, raw_obj_temp, &obj_temp, &amb_temp);
|
||||
PRINTF("TMP: %04X %04X o=%d a=%d\n", raw_temp, raw_obj_temp,
|
||||
(int)(obj_temp * 1000), (int)(amb_temp * 1000));
|
||||
|
||||
obj_temp_latched = (int)(obj_temp * 1000);
|
||||
amb_temp_latched = (int)(amb_temp * 1000);
|
||||
rv = 1;
|
||||
} else if(type == TMP_007_SENSOR_TYPE_OBJECT) {
|
||||
rv = obj_temp_latched;
|
||||
} else if(type == TMP_007_SENSOR_TYPE_AMBIENT) {
|
||||
rv = amb_temp_latched;
|
||||
}
|
||||
|
||||
return rv;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the TMP007 sensor.
|
||||
*
|
||||
* \param type Activate, enable or disable the sensor. See below
|
||||
* \param enable
|
||||
*
|
||||
* When type == SENSORS_HW_INIT we turn on the hardware
|
||||
* When type == SENSORS_ACTIVE and enable==1 we enable the sensor
|
||||
* When type == SENSORS_ACTIVE and enable==0 we disable the sensor
|
||||
*/
|
||||
static int
|
||||
configure(int type, int enable)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_HW_INIT:
|
||||
enable_sensor(false);
|
||||
enabled = SENSOR_STATUS_INITIALISED;
|
||||
break;
|
||||
case SENSORS_ACTIVE:
|
||||
/* Must be initialised first */
|
||||
if(enabled == SENSOR_STATUS_DISABLED) {
|
||||
return SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
if(enable) {
|
||||
enable_sensor(true);
|
||||
ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, notify_ready, NULL);
|
||||
enabled = SENSOR_STATUS_NOT_READY;
|
||||
} else {
|
||||
ctimer_stop(&startup_timer);
|
||||
enable_sensor(false);
|
||||
enabled = SENSOR_STATUS_INITIALISED;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return enabled;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns the status of the sensor
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return 1 if the sensor is enabled
|
||||
*/
|
||||
static int
|
||||
status(int type)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_ACTIVE:
|
||||
case SENSORS_READY:
|
||||
return enabled;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(tmp_007_sensor, "TMP007", value, configure, status);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
76
platform/srf06-cc26xx/sensortag/tmp-007-sensor.h
Normal file
76
platform/srf06-cc26xx/sensortag/tmp-007-sensor.h
Normal file
|
|
@ -0,0 +1,76 @@
|
|||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-tmp-sensor SensorTag 2.0 IR thermophile sensor
|
||||
*
|
||||
* Due to the time required for the sensor to startup, this driver is meant to
|
||||
* be used in an asynchronous fashion. The caller must first activate the
|
||||
* sensor by calling SENSORS_ACTIVATE(). This will trigger the sensor's startup
|
||||
* sequence, but the call will not wait for it to complete so that the CPU can
|
||||
* perform other tasks or drop to a low power mode.
|
||||
*
|
||||
* Once the sensor is stable, the driver will generate a sensors_changed event.
|
||||
*
|
||||
* The caller should then use value(TMP_007_SENSOR_TYPE_ALL) to read sensor
|
||||
* values and latch them. Once completed successfully, individual readings can
|
||||
* be retrieved with calls to value(TMP_007_SENSOR_TYPE_OBJECT) or
|
||||
* value(TMP_007_SENSOR_TYPE_AMBIENT).
|
||||
*
|
||||
* Once required readings have been taken, the caller has two options:
|
||||
* - Turn the sensor off by calling SENSORS_DEACTIVATE, but in order to take
|
||||
* subsequent readings SENSORS_ACTIVATE must be called again
|
||||
* - Leave the sensor on. In this scenario, the caller can simply keep calling
|
||||
* value(TMP_007_SENSOR_TYPE_ALL) to read and latch new values. However
|
||||
* keeping the sensor on will consume more energy
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26xx TI TMP007 infrared thermophile sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef TMP_007_SENSOR_H_
|
||||
#define TMP_007_SENSOR_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define TMP_007_SENSOR_TYPE_OBJECT 1
|
||||
#define TMP_007_SENSOR_TYPE_AMBIENT 2
|
||||
#define TMP_007_SENSOR_TYPE_ALL 3
|
||||
/*---------------------------------------------------------------------------*/
|
||||
extern const struct sensors_sensor tmp_007_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* TMP_007_SENSOR_H_ */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
Loading…
Reference in a new issue