1518 commits

Author	SHA1	Message	Date
Ian Martin	0dafba4f6d	Add a rule for generating assembly listings on mc1322x targets, for example: "make webserver6.lst".	2013-12-01 16:22:37 -05:00
Mariano Alvira	5fbefbd87b	Merge pull request #459 from adamdunkels/push/mc1322x-stuff ... MC1322x additions	2013-11-29 11:59:04 -08:00
Benoît Thébaudeau	1a696eb123	cc2538: gpio: Clear the power-up interrupts in the port ISRs ... The pending GPIO power-up interrupts have to be cleared in the ISRs in order not to re-trigger the interrupts and the wake-up events. The power-up interrupts of all pins are cleared for each port in the corresponding port ISR. This is done after calling the registered callbacks so that the callbacks can know which pin woke up the SoC. This is done after clearing the regular interrupt in order to avoid getting a new wake-up interrupt without the regular interrupt in the case of a new wake-up edge occurring between the two clears. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-26 22:20:05 +01:00
Benoît Thébaudeau	44a5c76884	cc2538: gpio: Add macros to use GPIO power-up interrupts ... The GPIO power-up interrupts have to be configured and enabled in order to be able to wake-up the SoC from PM1+ upon a signal edge occurring on a GPIO input pin. This set of macros allows to: - configure the signal edge triggering a power-up interrupt, - enable and disable a power-up interrupt, - clear a power-up interrupt flag. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-26 22:10:47 +01:00
Benoît Thébaudeau	621f4f7339	cc2538: lpm: Give access to the SRAM non-retention area for PM2 ... If PM2 is enabled with LPM_CONF_MAX_PM, but not active, the non-retention area of the SRAM can be useful to place temporary data that does not fit in the low-leakage SRAM, typically after having called lpm_set_max_pm(LPM_PM1). Hence, give access to this non-retention area thanks to .nrdata* sections. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-25 15:43:37 +01:00
Benoît Thébaudeau	270ed237fd	cc2538: usb: Make the GPIO driving the pull-up optional ... The data sheet recommends that the USB pull-up resistor be driven by a GPIO so that it can be controlled by software, but this is not mandatory. Hence, leave the choice so that CC253-based boards not using this option can build and work fine. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-25 15:15:35 +01:00
Benoît Thébaudeau	d2f3795a30	cc2538: Clean up port and pin definitions ... Homogenize port and pin definitions naming: - PERIPHERAL_FUNCTION_PORT for the port ID, - PERIPHERAL_FUNCTION_PIN for the pin ID, - PERIPHERAL_FUNCTION_PORT_BASE for the port base, - PERIPHERAL_FUNCTION_PIN_MASK for the pin mask. Define only PERIPHERAL_FUNCTION_PORT and PERIPHERAL_FUNCTION_PIN in board.h, and deduce PERIPHERAL_FUNCTION_PORT_BASE and PERIPHERAL_FUNCTION_PIN_MASK in the driver from the former definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-25 15:00:41 +01:00
Adam Dunkels	bb2dcaa057	A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix	2013-11-24 20:20:11 +01:00
Adam Dunkels	e09ff3ff1e	Merge pull request #438 from adamdunkels/push/cleanup-platforms ... Massive platform cleanup	2013-11-24 01:59:53 -08:00
Adam Dunkels	1ab28e4668	Added missing argument declaration	2013-11-23 15:05:16 +01:00
Adam Dunkels	e95236b642	Added header declarations for cc2538_rf_read_rssi() and cc2538_rf_set_promiscous_mode()	2013-11-23 15:05:16 +01:00
Adam Dunkels	76f2a10c9a	Added a function for setting promiscous mode on the CC2538 RF core	2013-11-23 15:05:15 +01:00
Adam Dunkels	473d519926	Added a way to obtain the RSSI from the CC2538 RF core	2013-11-23 15:05:15 +01:00
Adam Dunkels	27433244a9	The pc-6001 platform was the last z80 platform in the tree, so we'll remove the cpu/z80 directory too	2013-11-22 16:33:46 +01:00
Adam Dunkels	7a310935d8	An implementation of the mc1322x watchdog	2013-11-22 15:54:06 +01:00
Adam Dunkels	88f9d79053	Enable the silent compilation mode from the latest Contiki	2013-11-22 15:53:30 +01:00
Oliver Schmidt	737d5fd6dc	Replaced web configurator with target-based ethconfig.	2013-11-21 21:57:42 +01:00
Oliver Schmidt	3abd5d3d8d	Show current IP config on startup.	2013-11-20 22:33:11 +01:00
George Oikonomou	f13af20f12	Merge pull request #409 from ADVANSEE/cc2538-spi ... cc2538: spi: Bug fix and various improvements	2013-11-20 06:51:26 -08:00
Benoît Thébaudeau	e8a8870d1d	cc2538: spi: Add enable and disable functions ... This makes it possible to reduce the power consumption when the SPI is unused. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-20 14:20:50 +01:00
Benoît Thébaudeau	b134e35450	cc2538: spi: Add format configuration options ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-20 14:20:43 +01:00
Nicolas Tsiftes	263e212427	Merge pull request #431 from adamdunkels/push/ipv6-const ... Make IP addresses const	2013-11-20 04:26:05 -08:00
Nicolas Tsiftes	d183b87f4b	Merge pull request #434 from adamdunkels/push/cleanup-sys ... Remove old unused code from the core/sys/ directory	2013-11-19 09:53:57 -08:00
George Oikonomou	dc05eea3f5	Merge pull request #426 from ADVANSEE/cc2538-rom ... cc2538: Add driver for the rom utility function library	2013-11-19 03:09:16 -08:00
Adam Dunkels	30c0c5eaf6	Removed old unused timetable code	2013-11-19 08:29:23 +01:00
Adam Dunkels	469884171a	Added the const keyword to functions that use the tcpip_set_outputfunc(), which now takes a const argument	2013-11-18 23:26:37 +01:00
Benoît Thébaudeau	1f1b940cb9	cc2538: Add driver for the rom utility function library ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-18 12:38:06 +01:00
Benoît Thébaudeau	035a30602b	cc2538: lpm: Make periph_permit_pm1_funcs static ... periph_permit_pm1_funcs[] is a private member of lpm.c, so define it as static. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-18 11:57:59 +01:00
George Oikonomou	b10c78f854	Merge pull request #425 from ADVANSEE/cc2538-gpio ... cc2538: gpio: Bug fix and various improvements	2013-11-15 13:04:09 -08:00
George Oikonomou	98a1f2dfa9	Merge pull request #408 from ADVANSEE/cc2538-uart ... cc2538: lpm: Add registration mechanism for peripherals and use it	2013-11-15 12:57:03 -08:00
Benoît Thébaudeau	680050861c	cc2538: gpio: Use accessor macros ... Use the GPIO accessor macros instead of copying raw register access code all over the place. This is cleaner and less error prone. This fixes the setting of the USB pull-up resistor that worked only by chance on the CC2538DK because it is controlled by the pin 0 of the used GPIO port. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 19:57:44 +01:00
Benoît Thébaudeau	923f161b7b	cc2538: gpio: Add pin read / write and interrupt clear macros ... Introduce new useful GPIO macros to: - read the levels of some port pins, - write the levels of some port pins (pass bit-field value to be set), - clear the interrupt flags for some port pins. These macros are cleaner and less error prone than raw register access code copied all over the place. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 19:48:24 +01:00
Benoît Thébaudeau	300d2d79ae	cc2538: gpio: Fix usage of parameters in macros ... The parameters in the GPIO macros were used without being parenthesized. This could generate wrong values for register assignments in the case of expressions passed as arguments to these macros. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 19:43:06 +01:00
Benoît Thébaudeau	b8b54a033c	cc2538: uart: Fix crippled output occurring upon lpm_enter() ... lpm_enter() must not enter PM1+ if the UART TX FIFO is not empty. Otherwise, the UART clock gets disabled, and its TX is broken. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 17:24:26 +01:00
Benoît Thébaudeau	0692ee251d	cc2538: usb: Use the new LPM peripheral registration ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 17:14:45 +01:00
Benoît Thébaudeau	d35732505b	cc2538: lpm: Add registration mechanism for peripherals ... Some peripherals have their clocks automatically gated in PM1+ modes, so they cannot operate. This new mechanism gives peripherals a way to prohibit PM1+ modes so that they can properly complete their current operations before entering PM1+. This mechanism is implemented with peripheral functions registered to the LPM module. These functions return whether the associated peripheral permits or not PM1+ modes. They are called by the LPM module each time PM1+ might be possible. If any of the peripherals wants to block PM1+, then the system is only dropped to PM0. Partly from: George Oikonomou Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 17:09:22 +01:00
George Oikonomou	d08a87880c	Merge pull request #410 from ADVANSEE/cc2538-sys_ctrl ... cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal	2013-11-15 07:42:45 -08:00
Benoît Thébaudeau	f1ca1b742c	cc2538: spi: Include spi-arch.h before dev/spi.h ... spi-arch.h configures dev/spi.h, so it must be #included first. Luckily, this mistake did not have any consequence here, but fix it in order to avoid possible future issues. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 15:56:40 +01:00
Benoît Thébaudeau	f34731c1a9	cc2538: spi: Do not call SPI_WAITFOREORx() at end of init ... If the SSI has never been used and spi_init() is called, then the SSI receive FIFO is empty and remains so, so calling SPI_WAITFOREORx() at the end of spi_init() waits endlessly for SSI_SR.RNE to be set. Hence, this call must be removed in order to avoid a deadlock. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 15:56:40 +01:00
Benoît Thébaudeau	47d570343e	cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 15:52:10 +01:00
Benoît Thébaudeau	a7d10ce2ad	cc2538: Make it possible to use a custom linker script ... Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 15:41:58 +01:00
Benoît Thébaudeau	974850cdf2	cc2538: Generate .hex output ... ELF files generated by GCC make SmartRF Flash Programmer 2 crash (only the TI format is supported by this tool for ELFs), and binary files are not very appropriate because they are gapless, so generate Intel HEX files since these are very well supported by most programming tools while still flexible. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>	2013-11-15 15:41:58 +01:00
Mariano Alvira	6b9b457a60	Merge pull request #385 from ismb-pert/better-error-message ... Better error message in case of wrong CPUREV value	2013-11-14 07:14:33 -08:00
Oliver Schmidt	59c28bc32b	Merge pull request #419 from oliverschmidt/master ... Saved six more bytes ;-)	2013-11-13 14:43:06 -08:00
Oliver Schmidt	1bf5b4380d	Saved six more bytes ;-)	2013-11-13 23:32:49 +01:00
Oliver Schmidt	497e7fbbac	Merge pull request #416 from oliverschmidt/master ... Added missing fixup & removed wait loop from poll.	2013-11-11 12:06:38 -08:00
Oliver Schmidt	ae1a875881	Added missing fixup & removed wait loop from poll.	2013-11-11 21:03:39 +01:00
Oliver Schmidt	dd30454c80	Merge pull request #415 from oliverschmidt/master ... Added 6502 driver for WIZnet W5100 in MACRAW mode.	2013-11-09 14:17:07 -08:00
Oliver Schmidt	2d7d1b123d	Added 6502 driver for WIZnet W5100 in MACRAW mode.	2013-11-09 23:15:20 +01:00
George Oikonomou	ce0b2cacac	Merge pull request #365 from g-oikonomou/cc2538-uart-init-fix ... Set peripheral mode for the correct CC2538 UART TX/RX pins	2013-10-23 07:10:41 -07:00
Gianfranco Costamagna	ddd6b900cd	Better error message in case of wrong CPUREV value	2013-10-17 12:33:36 +02:00
Oliver Schmidt	57d9c43a33	Removed support for 'atari' now that 'atarixl' is part of the cc65 master.	2013-10-03 22:55:32 +02:00
Oliver Schmidt	7c2f3b3911	Saved another byte ;-)	2013-10-03 22:32:12 +02:00
George Oikonomou	e4a454b284	Set peripheral mode for the correct UART TX/RX pins	2013-09-30 14:50:39 +01:00
George Oikonomou	2957d44ff8	Merge pull request #352 from lab11/cc2538-spi-driver ... Added SPI driver for CC2538	2013-09-28 13:25:17 -07:00
Brad Campbell	e2af903d05	Added SPI driver for CC2538 ... This uses the core/dev/spi.h header and implements the spi_init() function and the various macros for SPI operation. ssi.h contains all of the register locations and information. This implementation is not very versatile, mostly because I don't how to make it flexible in the contiki system. It supports pin muxing for the four spi pins, but other than that picks sensible defaults. The SPI macros (like SPI_READ()) are defined in cpu/cc2538/spi-arch.h. In order to use the SPI driver, add the following includes to your project: #include "spi-arch.h #include "dev/spi.h"	2013-09-27 17:46:15 -04:00
Oliver Schmidt	2263c1aa55	- Optimized LAN91C96 driver for speed and size. ... - Speed: The primary byte copy loops are reduzed to the bare minimum by adjusting the base pointer 'ptr' and loop register 'y' in such a way that the 'y' overflow matches the low byte of the loop size. - Introduced a loop for setting the MAC address. Additional minor fix: - Properly start self modification with first location.	2013-09-12 23:32:26 +02:00
Oliver Schmidt	ea08635ca4	Optimized CS8900A driver for speed and size. ... - Speed: The primary byte copy loops are reduzed to the bare minimum by adjusting the base pointer 'ptr' and loop register 'y' in such a way that the 'y' overflow matches the low byte of the loop size. - Size: Factored out all repeated code into subroutines. Introduced a loop for setting the MAC address. Additional minor changes: - Activate frame reception as last step of initialization after CS8900A configuration. - Properly set internal address bits used by the CS8900A.	2013-09-12 23:32:25 +02:00
Brad Campbell	982ca0fb46	Updates CC2538 GPIO ... 1. Fixes two of the comments to GPIO macros. They were copied but not updated. 2. Adds SET and CLR macros for controlling GPIO pins.	2013-09-11 21:39:56 -04:00
Nicolas Tsiftes	7987a6dac7	Merge pull request #328 from g-oikonomou/cc2538-uart-config ... Make the CC2538 UART driver more configurable	2013-08-09 10:20:36 -07:00
George Oikonomou	460d5bcb5d	Fix cc2530 UART1 init bug ... Fixes #286	2013-08-09 16:09:12 +01:00
George Oikonomou	cb075dec65	Disable SDCC warnings 110 and 126 ... Those two warnings are optimisation-related * 110 warns that an always-false if branch has been optimised out * 126 warns about unreachable code which also gets optimised out In disabling those warnings, we make the build less cluttered	2013-08-09 15:57:49 +01:00
George Oikonomou	20f06e3271	Support verbosity control for 8051-based platforms	2013-08-09 15:57:21 +01:00
George Oikonomou	c89450a233	Change to sdar from the now deprecated sdcclib	2013-08-09 15:56:16 +01:00
George Oikonomou	b025759665	Don't redirect sdld output to dev/null ... This was used in the past because sdld was very verbose when linking banked hex files. New sdld versions do not exhibit this level of verbosity and therefore the redirect can be stopped	2013-08-09 15:56:15 +01:00
George Oikonomou	1b0470687b	Change the cc2531 usb stick descriptor ... The CC2531 USB stick now identifies itself as a 'Texas Instruments CC2531 USB Dongle' and uses a TI-assigmed VID:PID. The VID:PID is now configurable in contiki- or project-conf.h	2013-08-09 15:51:58 +01:00
George Oikonomou	0a7094bc39	Remove leftover make targets ... The sensinode platform does not support .upload and .serialdump Their presence in the makefile has confused in the past confused some users. This commit removes them The commit also removes the $(OBJECTDIR)/%.rel: %.cS recipe which is not used by either 8051 platform and is probably broken anyway, since it has been unmaintained for years	2013-08-09 15:48:05 +01:00
George Oikonomou	6c6013b898	Make the CC2538 UART driver more configurable ... * We can now very easily switch between UART0 and UART1 through a define * We can also configure the UART RX and TX port/pin through defines	2013-08-09 12:20:25 +01:00
George Oikonomou	c3b5d4f5e3	Add support for verbosity control	2013-08-07 15:26:22 +01:00
Nicolas Tsiftes	a9f0907640	Merge pull request #304 from frtos-wpan/rf230bb-merged ... cpu/avr/radio/rf230bb/rf230bb.c (rf230_transmit): extend comment on tx s...	2013-08-05 00:24:35 -07:00
Oliver Schmidt	6ab336f55f	Several minor consistency improvements.	2013-07-31 00:55:31 +02:00
Oliver Schmidt	3c6c7381d8	Suppress some usual warnings.	2013-07-31 00:29:52 +02:00
Oliver Schmidt	8d23d1b0bb	Support the recently added verbosity control.	2013-07-31 00:15:38 +02:00
Oliver Schmidt	116c3f119b	unistd.h doesn't seem to be necessary but breaks the MS VC build.	2013-07-31 00:02:29 +02:00
Werner Almesberger	be0a296049	cpu/avr/radio/rf230bb/rf230bb.c (rf230_transmit): extend comment on tx sequence ... Explain that the transmission is intentionally started before copying the frame to the buffer.	2013-07-28 18:43:29 -03:00
Mariano Alvira	5d19de3dbf	Merge pull request #266 from ismb-pert/fix-mbxxx ... mb851 platform is now the more generic mbxxx. STM32W_CPUREV environment variable is used to select the variant of STM32W to use.	2013-07-26 07:38:11 -07:00
stefano pascali	36e7db42de	Some little refactor	2013-07-19 16:15:55 +02:00
stefano pascali	b43ce0f677	Travis-ci tweaks, added CPUREV to 01 regression test, needed by mbxxx platform	2013-07-12 17:07:04 +02:00
stefano pascali	fcb09d5d30	Fixed mbxxx platform	2013-07-11 17:56:17 +02:00
Mariano Alvira	6307f3ff95	mc1322x: make uart buffer sizes configurable from contiki-conf.h	2013-07-04 14:09:40 -04:00
Oliver Schmidt	ad34b714cd	Merge pull request #287 from oliverschmidt/master ... The current cc65 build doesn't require this workaround anymore.	2013-06-27 15:38:48 -07:00
Oliver Schmidt	fb1de74dc4	The current cc65 build doesn't require this workaround anymore.	2013-06-28 00:36:33 +02:00
Peter A. Bigot	5fc0575e99	Makefile.include: support make clean all ... Historically $(OBJECTDIR) was created when Makefile.include is read. A consequence is that combining "clean" with "all" (or any other build target) results in an error because the clean removes the object directory that is required to exist when building dependencies. Creating $(OBJECTDIR) on-demand ensures it is present when needed. Removed creation of $(OBJECTDIR) on initial read, and added an order-only dependency forcing its creation all Makefile* rules where the target is explicitly or implicitly in $(OBJECTDIR).	2013-06-20 17:45:41 -05:00
Oliver Schmidt	79bb5ea73f	Removed some more old RCS tags from the Contiki source tree.	2013-06-13 15:54:26 +02:00
Oliver Schmidt	cbce31cb59	Another small addition for platform 'Atari XL'.	2013-06-02 23:36:28 +02:00
Robert Quattlebaum	36fbbe48aa	Merge pull request #244 from darconeous/pull-requests/cpu-native-tapdev-ipv6-fix ... native/net/tapdev: Fix for new `UIP_CONF_IPV6` handling.	2013-05-21 17:42:44 -07:00
Nicolas Tsiftes	a445c4020d	Merge pull request #153 from darconeous/pull-requests/cpu-avr-bootloader ... avr/bootloader.c: Now compatible with bootloaders which always run first	2013-05-20 05:49:13 -07:00
Robert Quattlebaum	09eec82d08	Merge pull request #134 from darconeous/pull-requests/cpu-avr-avrdude-mcu ... cpu/avr: Added "AVRDUDE_MCU" configuration parameter.	2013-05-19 17:35:26 -07:00
Robert Quattlebaum	9c70e0e5cc	native/net/tapdev: Fix for new UIP_CONF_IPV6 handling.	2013-05-19 17:27:30 -07:00
Robert Quattlebaum	674f70b6c3	cpu/avr: Added "AVRDUDE_MCU" configuration parameter.	2013-05-19 14:23:31 -07:00
Adam Dunkels	aaac20a950	Merge pull request #225 from tecip-nes/pic32_minor_reorganization ... Pic32 minor reorganization	2013-05-19 14:22:14 -07:00
Robert Quattlebaum	9c17a542a7	avr/bootloader.c: Now compatible with bootloaders which always run first. ... The boot loader now knows when to go into bootstrap mode by looking for a specific EEPROM value. Also updated code style to match Contiki code style guidelines.	2013-05-19 08:21:16 -07:00
Robert Quattlebaum	535e90343c	Merge pull request #144 from darconeous/pull-requests/settings-for-all-targets ... core/lib/settings: Generalized settings manager to work on any platform	2013-05-18 12:03:09 -07:00
Robert Quattlebaum	b8c0f2de6c	cpu/native: Add file-backed simulated EEPROM to native cpu. ... This patch removes a defunct EEPROM implementation from the native platform and provides a new EEPROM implementation for the native cpu. The previous implementation appears to be vestigal. This is useful for testing code which uses the EEPROM without running the code on the actual hardware. By default the code will create a new temporary file as the EEPROM backing, reinitializing each time. If you would like to preserve the EEPROM contents or specify a specific EEPROM file to use, you can set the `CONTIKI_EEPROM` environment variable to the name of the EEPROM file you wish to use instead. If it already exists, its contents will be used. If it does not already exist, it will be created and initialized by filling it with `0xFF`---just like a real EEPROM. A new example is also included, which was used to verify the correctness of the implementation. It can easily be used to verify the EEPROM implementations of other targets.	2013-05-18 10:29:41 -07:00
Giovanni evilaliv3 Pellerano	c33d51e762	pic32 minor cleanups	2013-05-17 14:32:39 +02:00
Adam Dunkels	59a8df14a8	Merge pull request #189 from sieben/markdown ... Update to markdown	2013-05-16 00:24:25 -07:00
François Revol	7967779e6c	tapdev: Fix using an uninitialized buffer	2013-04-20 14:42:19 +02:00
George Oikonomou	704309cfd4	Change the InfoPage Location of the IEEE address	2013-04-17 15:44:01 +01:00
George Oikonomou	8b5b2bd4d8	CC2538 Documentation typo and grammar fixes	2013-04-17 15:41:41 +01:00
George Oikonomou	007e113ea9	Improve handling of CDC ACM line state ... - For the CC2538, simplify handling of USB_CDC_ACM_LINE_STATE events. Ignore the Carrier Control (RTS) bit when receiving a SET_CONTROL_LINE _STATE request, we are a full duplex device. - Improve behaviour of the CC2531 USB stick when there is no process on the host to read IN data. Basically, we adopt the CC2538 approach and we only send data when a DTE is present	2013-04-16 15:49:05 +01:00
George Oikonomou	40f49948e6	New Platform: TI CC2538 Development Kit ... This commit adds cpu, platform and example files, providing support for running Contiki on TI's cc2538 DK	2013-04-06 21:07:31 +01:00
Rémy Léone	e6bd4f1dde	Rename to md	2013-03-26 23:15:37 +01:00
Rémy Léone	7b40a568a6	Update to markdown ... - Spellchecking - Update plain text to github markdown	2013-03-26 16:55:19 +01:00
Robert Quattlebaum	28a1e40ebd	core/lib/settings: Generalized Settings Manager to work on any platform ... This commit moves the Settings Manager from the AVR codebase into the Contiki core library. Any platform that implements the Contiki EEPROM API can now use the Settings Manager's key-value store for storing their persistent configuration info. The Settings Manager is a EEPROM-based key-value store. Keys are 16-bit integers and values may be up to 16,383 bytes long. It is intended to be used to store configuration-related information, like network settings, radio channels, etc. * Robust data format which requires no initialization. * Supports multiple values with the same key. * Data can be appended without erasing EEPROM. * Max size of settings data can be easily increased in the future, as long as it doesn't overlap with application data. The format was inspired by the [OLPC manufacturing data format][]. Since the beginning of EEPROM often contains application-specific information, the best place to store settings is at the end of EEPROM (the "top"). Because we are starting at the end of EEPROM, it makes sense to grow the list of key-value pairs downward, toward the start of EEPROM. Each key-value pair is stored in memory in the following format: Order | Size | Name | Description --------:|---------:|--------------|------------------------------- 0 | 2 | `key` | 16-bit key -2 | 1 | `size_check` | One's-complement of next byte -3 | 1 or 2 | `size` | The size of `value`, in bytes -4 or -5 | variable | `value` | Value associated with `key` The end of the key-value pairs is denoted by the first invalid entry. An invalid entry has any of the following attributes: * The `size_check` byte doesn't match the one's compliment of the `size` byte (or `size_low` byte). * The key has a value of 0x0000. [OLPC manufacturing data format]: http://wiki.laptop.org/go/Manufacturing_data	2013-03-20 11:57:13 -07:00
Oliver Schmidt	6ba28bf74f	Merge pull request #180 from mmuman/cleanup-and-fixes ... Cleanup and fixes	2013-03-20 02:37:24 -07:00
François Revol	22bcb07c61	tapdev: Log to stderr; add tracing ... Use stderr for logging to avoid polluting stdout. Add some DEBUG tracing.	2013-03-19 19:41:20 +01:00
Adam Dunkels	a5046e83c7	Cleanup and refactoring of the STM32w port ... This is a general cleanup of things like code style issues and code structure of the STM32w port to make it more like the rest of Contiki is structured.	2013-03-18 13:31:26 +01:00
RongHQ	12b3d02ba1	Fix a syntax error in /cpu/cc253x/dev/uart0.c	2013-03-16 19:41:42 +08:00
Oliver Schmidt	a0e2120fdb	Added configurations of the new resolver.	2013-03-14 23:17:59 +01:00
George Oikonomou	cc37a1e46e	Fix cc2530 DMA priority define values ... Fixes #156	2013-03-12 15:39:59 +00:00
Adam Dunkels	39e5a8c6dc	Merge pull request #80 from darconeous/mdns-resolv ... Adds IPv6 and MDNS domain name resolution.	2013-03-10 12:58:39 -07:00
Adam Dunkels	c7ef7198a8	Merge pull request #85 from darconeous/native-target-osx ... Various updates to the minimal-net platform.	2013-03-10 12:48:07 -07:00
Robert Quattlebaum	1d113f52ad	core/net/uip: Rename uip_ethaddr to uip_lladdr. ... There isn't really a good reason I can think of for these to be different between IPv4 and IPv6.	2013-03-10 11:39:11 -07:00
Nicolas Tsiftes	a8dc74bda8	Merge pull request #133 from darconeous/pull-requests/cpu-avr-gc-sections ... cpu/avr: Make sure that GCC removes all unused symbols.	2013-03-07 12:52:24 -08:00
Mariano Alvira	ab8fe95864	Revert "Merge pull request #120 from Jeff-Ciesielski/stm32_cl" ... This reverts commit 029bc0ee27, reversing changes made to a7b3e99644. This uses LGPL libopencm3. While the patch doesn't include the code, the resulting binary would force the release of all code as LGPL.	2013-03-02 08:11:28 -05:00
Robert Quattlebaum	67a39618eb	cpu/avr: Make sure that GCC removes all unused symbols. ... This magic comes from the `--gc-sections` linker flag, which turns on garbage collection for unused input sections. The compiler flags `-ffunction-sections` and `-fdata-sections` make sure that each function and each static data definition have their own section. The result is that GCC can prune away all unused symbols, reducing the size of the resulting executable. These optimizations may be disabled by setting the Makefile variable `SMALL` to zero.	2013-02-28 21:59:19 -08:00
Robert Quattlebaum	38b2863831	Update cpu/native/Makefile.native	2013-02-26 11:29:04 -08:00
Nicolas Tsiftes	42e4b2b02a	Merge pull request #143 from idelamer/master ... Bug fix for Issue #88	2013-02-24 15:26:38 -08:00
Mariano Alvira	029bc0ee27	Merge pull request #120 from Jeff-Ciesielski/stm32_cl ... Add initial support for STM32F1x Connectivity Line devices	2013-02-24 15:08:57 -08:00
Oliver Schmidt	c6620e47aa	Merge pull request #131 from oliverschmidt/master ... Two minor retro-specific changes.	2013-02-16 15:12:52 -08:00
Oliver Schmidt	61b90c0126	We actually need PROJECT_OBJECTFILES and PROJECT_LIBRARIES for retro builds too.	2013-02-16 22:57:50 +01:00
Nicolas Tsiftes	2eb3c2a492	Merge pull request #94 from alignan/master ... Fixes Issue #93	2013-02-16 13:46:09 -08:00
Ivan Delamer	c22838b9d3	Enable Timer1 on Raven so that interrupts coming from radio, which are ... connected to input capture, fire again.	2013-02-15 16:08:37 -07:00
Oliver Schmidt	98060c1eab	Moved from last cc65 release (2.13.3) to recent cc65 snapshot (2.13.9). ... Relevant cc65 changes... General: - The compiler generates "extended" dependency info (like gcc) so there's no need for postprocessing whatsoever :-) - The linker is very pernickety regarding the ordering of cmdline options so a custom linker rule is necessary :-( Apple2: - The various memory usage scenarios aren't specified anymore via separate linker configs but via defines overriding default values in the builtin linker config. Atari: - The builtin linker config allows to override the start addr so there no more need for a custom linker config. - The C library comes with POSIX directory access. So there's no more need for for a custom coding. CBM: - The C library comes with POSIX directory access. So there's no more need for for a custom coding.	2013-02-14 15:42:43 +01:00
Jeff Ciesielski	6b97fa8382	stm32f1x_cl: Fix stm32f107 linker script ... This is a critical fix which adds inclusion of the entire data/bss section to the output ELF file. Without it, the BSS section will not be zeroed out	2013-02-09 23:54:14 -08:00
Oliver Schmidt	c7f986faf5	Merge pull request #121 from oliverschmidt/master ... Several minor adjustments.	2013-02-08 17:04:04 -08:00
Oliver Schmidt	9938cb6838	Adjusted names.	2013-02-09 01:58:37 +01:00
Jeff Ciesielski	5c6018f0e2	stm32f1x_cl: Add initial support for STM32F1x connectivity line ... This currently supports the stm32f107, but support will be added for the F105 shortly (missing a linker script and I can't properly test without a devkit).	2013-02-06 15:41:50 -08:00
Mariano Alvira	fb8bbf37cf	Use the RTC only as the main timer. ... This is a major change to how the main tick interrupt is handled on the mc1322x platforms. Instead of using two timer resources, TMR0 and RTC, this patch unifies all the timers to use the RTC. This is enabled by implementing etimers as scheduled rtimers. The main advantage (aside from freeing TMR0 for general use) is have the Contiki timebase come from the same source that will be used for sleeping and wakeup.	2013-02-03 15:15:05 -05:00
Mariano Alvira	ad55ccdec4	add working routines to turn the mc1322x radio on and off	2013-02-03 14:48:38 -05:00
Oliver Schmidt	69317ad1db	Renamed retro 'dhcp-client' to 'ipconfig' as it can as well be used for interactive manual configuration.	2013-02-01 21:20:21 +01:00
Oliver Schmidt	74dfff972f	Do not reject frames with a length exactly equal to the uIP bufer size.	2013-01-30 23:39:01 +01:00
Robert Quattlebaum	a571b663b0	platform/minimal-net: Better, more seamless support for OS X. ... This patch enables automatic route setup and cleanup when starting and stopping the minimal-net target on OS X. Both IPv4 and IPv6 are supported. Using the minimal-net target on OS X was absolute hell before I came up with this patch. Now it is painless.	2013-01-30 09:17:30 -08:00
Robert Quattlebaum	092b6f3baa	platform/minimal-net: Implement better idle behavior. ... The minimal-net target, as currently written, wakes up the CPU every millisecond to check for packets, and will only react in real-time to input from stdin. If you are running this on a laptop battery, your battery will quickly drain. This change allows the CPU to idle when there is literally nothing to do while still being responsive to input from stein and/or incoming packets. This fix should significantly improve performance while significantly improving power usage. Win-win. Also added `_xassert()` implementation so that the contiki- provided `assert()` macro will work properly when used on this platform.	2013-01-30 09:17:29 -08:00
Oliver Schmidt	e88997b71c	Minor README updates.	2013-01-29 22:44:37 +01:00
Antonio Lignan	2cf4e30b11	Baudrate now is configured taking into account the MCU frequency, instead of using fixed values for 8MHz freq	2013-01-29 12:23:23 +01:00
Oliver Schmidt	1a5e20bc5f	Remove tab chars from retro C sources.	2013-01-28 23:43:08 +01:00
George Oikonomou	eea6b9051d	Removed a stray leds_toggle	2013-01-09 22:46:20 +00:00
Adam Dunkels	326781ef43	Merge pull request #74 from malvira/maca-dummy-rx ... Receive packets in a dummy_rx when the maca packet pool is	2013-01-06 14:10:23 -08:00
Mariano Alvira	a53e653bbf	Receive packets in a dummy_rx when the maca packet pool is ... empty. These packets get dropped.	2013-01-06 15:12:07 -05:00
Mariano Alvira	64ded5aecc	run the linker script through CPP so that the stack sizes can be ... changed using CONF parameters via DEFINES (e.g. SYS_CONF_STACK_SIZE 4096)	2013-01-05 17:08:59 -05:00
Giovanni `evilaliv3` Pellerano	ee556dcf14	minor corrections to adhere contiki code style guidelines	2012-12-21 12:36:29 +01:00
Giovanni `evilaliv3` Pellerano	f68df3a81c	added support for pic32 (PIC32MX795F512L)	2012-12-17 09:14:23 +01:00
George Oikonomou	380ee3bae9	Code style fixes: cc253x	2012-12-16 19:28:56 +00:00
George Oikonomou	874bec26a5	Code style fixes: cc2430	2012-12-16 19:28:55 +00:00
Arngrimur Bjarnason	b533a683c3	Changed makefile. Removed extra slash	2012-12-10 20:41:43 +01:00
Mariano Alvira	f60a00b93e	the contiki-maca process should wait for a poll event	2012-12-02 14:26:51 -05:00
Mariano Alvira	b3bb3ff53d	fix very incorrect insert_at_rx_head; the bugged version would make ... the rest of the rx list dangling. this is used to insert the ack packet needed by the upper layers in the netstack.	2012-12-02 14:25:39 -05:00
Mariano Alvira	f7d1d78ac9	disable pad keeper when using ADC pin; otherwise you'll see a 20k input ... impedance.	2012-11-30 10:44:26 -05:00
Adam Dunkels	db41a51ae6	Make gcc default LD, and allow override with LD_OVERRIDE	2012-11-21 19:46:31 +01:00
Ilya Dmitrichenko	d0f18e5d04	Fixed LDFLAGS for cross-compiling of "native"	2012-11-21 18:09:29 +00:00
Ilya Dmitrichenko	092c69639c	Enable native target for cross-compiling - ... by now it would have worked if you set CC via command line (e.g. `make CC=clang`, though it wouldn't work when CC is set in the platform makefile which includes `Makefile.native`.	2012-11-21 18:09:10 +00:00
Mariano Alvira	03ab3fe317	Newer and cleaner TARGET=econotag as well as robust mc13224v ... configuration system. (also deprecate TARGET=redbee-econotag) - mc13224v now automatically probes hardware config for buck converter and 32kHz crystal as well as automatically monitors battery voltage and manages the buck accordingly. - new flashed based config system for mc13224v parameters such has radio modes (demod, autoack), nvmtype, mac address, channel and power. - considerably cleaned up econotag platform code (suffered from severe case of bit-rot)	2012-11-19 19:16:29 -05:00
Mariano Alvira	2c9a538582	Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into bump-libmc1322x ... bump libmc1322x to 7bee48243c Conflicts: cpu/mc1322x/board/Makefile.board cpu/mc1322x/lib/include/uart.h cpu/mc1322x/lib/uart1.c cpu/mc1322x/lib/uart2.c cpu/mc1322x/src/default_lowlevel.c	2012-11-18 18:27:39 -05:00
Etienne Duble	7905316c54	Fix: stm32w flasher for Ubuntu 12.04 and later	2012-11-09 14:14:57 +01:00
Etienne Duble	ecdbbaec9a	Fix: handle stm32f-based serial interfaces (/dev/ttyACMx)	2012-11-09 14:00:16 +01:00
George Oikonomou	79cffa030f	cc2531: USB CDC-ACM code style fixes ... Closes #18	2012-11-01 17:42:04 +00:00
George Oikonomou	1a0f01ccc4	cc253x: Config to swap between UART and USB I/O ... See Pull Request #18	2012-11-01 17:41:57 +00:00
Philippe Rétornaz	eabaa0c8e4	cc253x: DMA Changes ... - Fixed DMA irq flag clearing - Added a dma_reset helper See Pull Request #18	2012-11-01 17:41:49 +00:00
Philippe Rétornaz	898bd07810	cc253x: optionally push bits in p2 interrupt ... See Pull Request #18	2012-11-01 17:41:46 +00:00
Philippe Rétornaz	0a6e65acdf	cc2531: USB changes: ... - usb cdc-acm: * implement get line coding * use printf only when debugging * Add events - usb-core: do not force debugging See Pull Request #18	2012-11-01 17:41:41 +00:00
George Oikonomou	c1d72475d7	cc253x: Renamed P2 interrupt-related files for better consistency ... See Pull Request #18	2012-11-01 17:41:38 +00:00
George Oikonomou	c60f0b4349	cc253x: P2-related routines are now bankable ... We keep the ISR in its own file and move everything else to a different one, so that we only have to keep the ISR in HOME See Pull Request #18	2012-11-01 17:41:32 +00:00
George Oikonomou	d9d4fa168d	cc253x: Renamed the P2 ISR ... This is mainly a naming convention thing, we want to have 'isr' as part of the name, instead of 'int'. We also want port_2 instead of p2 because we already had port_1 See Pull Request #18	2012-11-01 17:41:28 +00:00
George Oikonomou	fea4970142	cc253x: Configurable linkage for the P2 ISR ... See Pull Request #18	2012-11-01 17:41:24 +00:00
Philippe Rétornaz	ba96408f37	cc253x: Add USB support to the compilation scripts ... See Pull Request #18	2012-11-01 17:41:21 +00:00
Philippe Rétornaz	d93fee612d	cc2531: Add USB driver ... See Pull Request #18	2012-11-01 17:41:17 +00:00
Philippe Rétornaz	ddc8120d7c	cc253x: Add p2 interrupt handler ... The P2 Interrupt is shared across many periferal (I2C, USB, GPIO). This adds a generic interrupt handler on which the differents drivers can register a handler. See Pull Request #18	2012-11-01 17:41:11 +00:00
Philippe Rétornaz	dec34c21ef	cc2531: change cdc-acm descriptor ... Change to have a real usb VID/PID and better fit the capabilities of the CC2531 hardware (enpoint size, location). Compile only if the cdc-acm class is requested. See Pull Request #18	2012-11-01 17:41:07 +00:00
Philippe Rétornaz	0e55eb0947	cc2531: Copy arm usb framework ... See Pull Request #18	2012-11-01 17:40:35 +00:00
George Oikonomou	713c2e5974	DOS EOL and indentation fixes (core/ apps/ cpu/) ... - Removed some DOS EOLs - Changed some tabs to spaces - Removed some trailing whitespaces Part of Pull Request #6	2012-10-30 13:43:51 +00:00
Adam Dunkels	6c8fbd2dff	Merge pull request #11 from adamdunkels/remove-rtl8019 ... Removed old unused RTL8019 code that had license issues	2012-10-29 08:43:59 -07:00
Adam Dunkels	1af22fa4fe	Removed old unused RTL8019 code that had license issues	2012-10-29 16:08:09 +01:00
Mariano Alvira	4087c0785f	remove -g ... see http://comments.gmane.org/gmane.os.contiki.devel/13869	2012-10-29 10:34:28 -04:00
Adam Dunkels	944537fccf	Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree	2012-10-26 15:54:49 +02:00
Niclas Finne	f5c8cff5b2	Made MT stack size configurable	2012-10-23 00:52:52 +02:00
George Oikonomou	d84a97103f	cc2x3x stack debugging macro fix	2012-09-20 15:12:02 +01:00
George Oikonomou	fde1510653	Added definitions for cc2530 DMA-related SFR bits	2012-09-20 15:09:15 +01:00
George Oikonomou	3b0e92168b	Copied cc2530 stack functions to the cc2430 port	2012-09-20 15:09:15 +01:00
George Oikonomou	95b9d4ee29	Sensinode/cc2430 stack depth optimisation ... This replicates the method used by the cc2530 port	2012-09-20 15:09:15 +01:00
George Oikonomou	cb168da729	Changed the cc2430 sleep_flag to uint8_t	2012-09-20 15:09:15 +01:00
George Oikonomou	fa5a38666b	Removed redundant #else blocks	2012-09-20 15:09:15 +01:00
George Oikonomou	88c6689e38	cc2430: Build with --fomit-frame-pointer	2012-09-20 15:09:15 +01:00
Niclas Finne	767e8bb551	Default value for _DATA20_HEAP_SIZE when using the IAR compiler on MSP430 platforms	2012-09-20 14:01:56 +02:00
Niclas Finne	4630945475	Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms	2012-09-19 22:49:19 +02:00
George Oikonomou	ee7af77ca9	Reworked the cc2530 stack debugging facilities: ... - Moved to their own file (so we can later copy the entire thing over to cc2430) - Renamed the functions (for naming convention reasons) - The entire thing can be enabled/disabled - Added a couple more macros - Hooked into main()	2012-09-07 17:40:17 +01:00
Philippe Rétornaz	9a63e8c027	cc253x: Add stack monitoring helpers	2012-09-07 17:32:54 +01:00
Philippe Rétornaz	48d99f15c8	cc253x: fix dma interrupt enable flag	2012-09-07 17:32:54 +01:00
George Oikonomou	c6ec22c4c8	cc2530: Added a method to maximise stack depth ... This was oringinally contributed/reported/discussed/patched by Philippe Retornaz (EPFL) but it's implemented in a more configurable fashion here.	2012-09-07 17:32:53 +01:00
Philippe Rétornaz	666ff6ca55	cc253x: use a uint8_t for sleep_flag ... __bit variables must be located after the 0x20 address This force the stack to start after 0x20, thus decrease the stack size by a considerable amount.	2012-09-07 17:32:10 +01:00
Philippe Rétornaz	44bcabe89c	cc253x: Change CFLAGS ... This add -fomit-frame-pointer by default, it decrease sliglty the stack usage when several function call are nested. On some specific case 30 bytes could be saved on the stack.	2012-09-07 17:32:10 +01:00
George Oikonomou	8699f7741d	Fixed typos and a stray printf. Adjusted comments	2012-09-07 17:31:25 +01:00
Ivan Delamer	b43dad00b0	Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES ... #defines.	2012-09-04 11:12:18 -06:00
Ivan Delamer	2e72ec3594	Place ATmega1281 define in correct section (it does have compare C ... unit, avoid duplicate define and compiler warning).	2012-09-01 15:22:13 -06:00
Ivan Delamer	5636357243	Fix RF230 transition: RX_AACK_ON -> TX_ARET_ON (go through PLL_ON, ... as per datasheet). Tested on RF230 and 128RFA1 (RF231).	2012-09-01 15:20:00 -06:00
George Oikonomou	26a87ee9cb	Improved handling of cc2x3x rf_flags	2012-07-11 10:53:14 +01:00
George Oikonomou	43f2790357	Added channel_get() to the cc2x3x RF drivers	2012-07-11 10:53:14 +01:00
George Oikonomou	d66241fd97	Bugfixed the cc2530 LOW_POWER_RX configuration ... Report and fix by Tom Xiao	2012-07-11 10:53:14 +01:00
George Oikonomou	62fbd389d8	Renamed a cc253x SFRX to stop namespace conflicts ... The TR0 SFRX can not use the name TR0 because it conflicts with TCON.TR0 on the default 8051. See SDCC bug 3513300	2012-07-11 10:53:14 +01:00
George Oikonomou	4b73b48f60	Fixed the cc2530 RSSI adjustment	2012-07-11 10:53:14 +01:00
Ivan Delamer	17a62a649c	ATmega128RFA1 bug fix: no interrupt pin used (embedded radio). ... Enabling interrupt caused MCU reset if using pin as GPIO.	2012-07-10 14:36:47 -06:00
Niclas Finne	418a5772e6	Removed leds debug output	2012-06-07 10:35:22 +02:00
George Oikonomou	47db065034	Bugfixed the cc253x UART0 init (Thanks, Deng Jian) ... The flush instruction was resetting the stop bit level to 'low'	2012-06-06 15:25:57 +01:00
David Kopf	e9a55cc222	Enable check on received length to prevent buffer overflow. Thank you Cooja!	2012-05-28 13:02:23 -04:00
George Oikonomou	259b497122	Minor Sensinode build cleanup	2012-05-16 15:22:31 +01:00
George Oikonomou	1f7171f943	Adjust cc2x3x ports to the new clock API	2012-05-16 15:22:31 +01:00
George Oikonomou	0d4b90c42b	cc2530 watchdog improvements and cleanup	2012-05-16 15:22:31 +01:00
George Oikonomou	274a5ebb9c	Fixed a typo which was preventing the cc253x watchdog from starting	2012-05-16 15:22:30 +01:00
Laurent Deru	56914963ef	Reactivate flash protection after maca init	2012-05-09 10:24:38 -04:00
Mariano Alvira	a4813d815f	use --gc-sections instead of -gc-sections	2012-05-06 12:19:20 -04:00
Mariano Alvira	4acad929f0	add gc-sections, roughly 4kB savings.	2012-05-06 09:24:06 -04:00
David Kopf	d6dc216e02	Reorder includes to prefer platform routines. Remove redundant RPL define.	2012-04-27 16:54:09 -04:00
George Oikonomou	dd26accc07	We can now use SDCC's __nonbanked feature ... This allows us to reduce CODE footprint of SDCC projects built with --model-huge. Use carefully! * Added a facility which allows us to enable/disable the feature from the CPU dir (CC_CONF_NON_BANKED_OPTIMIZATION) * Added the CC_NON_BANKED keyword to some platform files (expands to __nonbanked) * Started using this for some examples	2012-04-26 15:28:43 +01:00
Adam Dunkels	b85bc3379c	Bugfix in clock_wait() declaration. Various style fixes.	2012-04-22 20:54:29 +02:00
George Oikonomou	e95f94a9a8	Added support for reading MAC from the cc253x flash ... We still use the primary location by default (Info Page) but this is now configurable. This change is useful for users who wish to specify their own MAC address. Since the Info Page is read-only, they need to be able to use the secondary location	2012-04-20 16:03:38 +01:00
George Oikonomou	29090a3dda	The cc253x Makefile specifies SoC flavor ... This will help us slowly add better support for smaller SoCs instead of just assuming that all cc253x SoCs are F256 - We build for F256 by default but the project Makefile can override this - We currently ignore this when passing --code-size. This is a ToDo - The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant	2012-04-20 16:03:38 +01:00
George Oikonomou	6fb48174ba	Fixed a documentation typo	2012-04-20 16:03:37 +01:00
Niclas Finne	1b13b69814	Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611	2012-04-10 16:05:10 +02:00
Niclas Finne	57a166c3db	Corrected compiler flags for the IAR compiler	2012-04-10 15:27:44 +02:00
David Kopf	cac4e9a222	Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t. ... Remove the troublesome avr/dev/delay.* files. Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE	2012-04-09 15:49:53 -04:00
David Kopf	40bd020394	Fix wrong register addresses.	2012-04-09 09:58:12 -04:00
George Oikonomou	57969259ce	cc2x3x clock_delay(len) now delays for approx. len usecs	2012-04-03 16:26:11 +01:00
George Oikonomou	3cb26adeda	Added an ASM(foo) macro for cc243x	2012-04-03 16:26:11 +01:00
George Oikonomou	242e02658f	The cc2530 UART driver was sending a 0 down the line on init	2012-04-03 16:26:10 +01:00
George Oikonomou	b3de052e01	Ported the stack-friendly clock ISR code over from cc243x to cc253x	2012-04-03 16:26:10 +01:00
George Oikonomou	11a7f644ac	Comment rewording and formatting	2012-04-03 16:26:10 +01:00
George Oikonomou	ce17fa131c	Stack-friendly cc243x clock ISR enabled by default ... This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate as originally thought. In fact, it has pretty much the same accuracy as the old, stack-hungry version. * Renamed the define from CLOCK_CONF_ACCURATE (1: old) to CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying that one is more accurate than the other. * Using CLOCK_CONF_STACK_FRIENDLY by default.	2012-04-03 16:26:10 +01:00
George Oikonomou	924fe934c1	Deleted obsolete macros. Minor formatting	2012-04-03 16:26:10 +01:00
George Oikonomou	ffa3a1c4c3	cc2x3x clock driver cleanup ... * Bit-Addressable SFRs are now accessed as such, instead of (N)OR-ing the byte * A routine was declared as CCIF but not defined as such. Fixed * Deleted a leftover duplicate define * Formatting * Comment updates and clarifications	2012-04-03 16:26:10 +01:00
simonduq	930c7c25bc	fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file, ... more printouts in main when ipv6 is used, and a target for memory profiling taking stm's gnu.ld static stack size into account	2012-04-03 11:47:30 +02:00
George Oikonomou	5240519dd9	Renamed a config define to better match contiki's naming philosophy	2012-04-02 11:38:54 +01:00
George Oikonomou	bce34e4b9a	For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir. ... The value is not really configurable by the platform so having it in contiki-conf.h didn't make huge sense.	2012-04-02 11:22:19 +01:00
George Oikonomou	d958ee3125	Deleted the old Sensinode 'read mac from flash' routine. ... Since the introduction of a purpose-written routine, the old generic one (which was written in asm) was never being used. There was a configuration directive which allowed us to switch between the two. All references to this configuration directive have also been removed.	2012-04-02 11:21:32 +01:00
George Oikonomou	5d8f63a61b	We've not been using the cc2430 converter for a while now	2012-04-02 11:03:49 +01:00
George Oikonomou	7854ee499a	Wrapped cc2x30 SOFT_RESET() macro inside do {...} while(0)	2012-03-29 13:11:04 +01:00
George Oikonomou	5afdd19403	Adjusted check to determine if we are being built with SDCC ... Since rev #7342, SDCC defines __SDCC_mcs51 instead of SDCC_mcs51. We check for either	2012-03-29 13:10:25 +01:00
George Oikonomou	4f1e251603	Some uN_t had crept back in cc2530dk and sensinode. ... Changed to uintN_t plus a bit of code formatting	2012-03-29 13:10:10 +01:00
simonduq	946f00bf7b	stm32w: added ability to upload and reset all connected boards, and login using MOTE=x	2012-03-26 23:00:44 +02:00
simonduq	95ae5c5d51	avoid unnecessary symbols.c/h copying	2012-03-26 23:00:43 +02:00
George Oikonomou	ad256e5014	New platform: TI cc2530 Development Kit ... This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs Some initial support for cc2531 USB dongles	2012-03-23 14:41:07 +00:00
George Oikonomou	b7674c3636	Reincarnate the sensinode/cc2430 port	2012-03-23 14:41:07 +00:00
simonduq	e4fb360262	stm32w platforms: contikimac support in the Rime case, with EUI-64	2012-03-20 17:30:59 +01:00
simonduq	5da4463236	adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La)	2012-03-20 17:29:58 +01:00
Niclas Finne	ff7a977dc7	Improved support for the IAR compiler for the MSP430 platforms	2012-03-07 23:09:05 +01:00
Niclas Finne	684c3edfa6	Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood.	2012-03-07 23:04:52 +01:00
Niclas Finne	2eee14a1d8	Allow compiler flag SMALL to be set to disable SMALL-build. Patch by Andre Frimberger.	2012-03-06 15:35:20 +01:00
Ilya Dmitrichenko	49cd7878e3	Avoid deprecated error on Darwin.	2012-03-02 15:15:47 -05:00
Ilya Dmitrichenko	499d3052ee	Fixed TARGET=native compilation issues on Darwin.	2012-03-02 15:15:42 -05:00
David Kopf	2b7ecefce7	Remove unused SPI initializer flag from AVR. Comment out in the msp-430 template.	2012-02-27 17:05:22 -05:00
Ilya Dmitrichenko	9c99d46e24	Simplified host OS platform detection in Makefiles	2012-02-25 10:09:33 -05:00
David Kopf	deb75d3d97	Several bugfixes	2012-02-21 11:14:52 -05:00
David Kopf	59e459e0e9	Add missing mtarch_stop function	2012-02-21 11:11:53 -05:00
David Kopf	6e45dfe5ff	PROGMEM changes needed for newer avr-gcc compiler	2012-02-21 11:10:57 -05:00
Nicholas J Humfrey	1cda3da17e	Converted u8_t to uint8_t and u16_t to uint16_t in the cpu directory.	2012-02-21 08:33:24 -05:00
Mariano Alvira	68591919e6	mc1322x: add -MMD to Makefile.mc1322x to correctly create dependencies	2012-02-16 11:17:15 -05:00
Mariano Alvira	43062b6d74	mc1322x: change how board.h works to allow default board.h (defaults ... to econotag)	2012-02-13 10:01:36 -05:00
Mariano Alvira	ee8f2c669e	mc1322x: remove symbols.{c,h}	2012-02-13 10:01:36 -05:00
David Kopf	9d6542d49b	Fix minimal-net webserver6, broken after native border router changes.	2012-02-11 15:03:24 -05:00
David Kopf	38267bfd5a	Webserver-nano: Add page load times, remove workaround code for bug in arm strformat.c, correct the double count of leading zeros there.	2012-02-11 14:58:35 -05:00
David Kopf	987906be97	rf230bb updates: involves setting the 801.15.4 pending bit, ... 0x800000 cpu clock, and a jtag reset bugfix	2012-02-01 14:16:39 -07:00
Ivan Delamer	57e686179c	Improved rf230bb.c synchronization/locking. Removed unnecessary locks ... during Tx (single-threaded environment). Added protection to Rx thread from buffer access by ISR.	2012-02-01 13:37:45 -07:00
David Kopf	7ca141b457	Access uart registers directly instead of through intermediate addresses in a RAM struct. ... Add a platform define to reduce the number of ports supported by the cpu.	2012-01-21 13:49:58 -05:00
Niclas Finne	f26920ae9b	Define the BV macro if not already defined	2012-01-11 08:46:16 +01:00
David Kopf	58298f59db	Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal ... Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.	2012-01-10 12:42:27 -05:00
Niclas Finne	f3db12c19d	MSP430 setup for f2xxx based on Z1	2012-01-09 14:56:03 +01:00
Niclas Finne	9ffcd53868	Fixed compiler warning (with IAR compiler)	2012-01-09 14:56:00 +01:00
Niclas Finne	3daa822f89	Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc)	2012-01-09 14:55:57 +01:00
Niclas Finne	fd81a0d393	Minor cleanup (avoid setting some compiler flags twice)	2012-01-09 14:55:54 +01:00
Niclas Finne	8e1e12dfd3	Ignore SMALL when using IAR compiler	2012-01-09 14:55:48 +01:00
Nicolas Tsiftes	eba64bdc5e	Be more explicit with the relationship between inheritance between MSP430 families.	2012-01-09 14:55:45 +01:00
Niclas Finne	cdfa8708e3	* Added f2xxx for two series (for example z1) ... * f1xxx is baseline and always included * Cleaned up the names of uart and spi (no x in names) * Updated SPI configuration for WiSMote	2012-01-09 14:54:57 +01:00
Niclas Finne	f4f84ffca4	Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X	2012-01-09 14:54:01 +01:00
Niclas Finne	09082f02fe	Changed clock_delay to use the nop instruction	2012-01-09 14:49:39 +01:00
Niclas Finne	cd4be4927a	Fixed quick dco sync to also work with mspgcc	2012-01-09 14:41:42 +01:00
Niclas Finne	708f9d77d2	Corrected timing for higher CPU speed	2012-01-09 14:41:36 +01:00
Niclas Finne	05b10eb9ce	Initial WiSMote port based on code from Arago Systems.	2012-01-09 12:25:06 +01:00
Niclas Finne	367c82a5ab	added compiler flags and macros for IAR and mspgcc 4.4.5 compilers	2012-01-09 12:24:33 +01:00
David Kopf	b251619a2f	Add wpcap for cygwin/Windows native border router	2012-01-08 13:37:56 -05:00
Fredrik Osterlind	2644057fb2	using dma by default	2011-12-21 10:53:18 +01:00
David Kopf	81af871db9	Bugfix: use 16 bit tick count to adjust clock after sleep	2011-12-01 09:58:55 -05:00
Oliver Schmidt	e38f008b9b	The dependency on the ucontext functions has the potential to keep others from successfully using cpu/native for other platforms. As the Contiki multithreading library typically isn't used at all it's not worth the trouble. So we just limit it to Windows and Linux - where it is known to not only build but actually work. If someone needs the Contiki cpu/native multithreading library on another platform he's certainly welcome to add that platform - hopefully by just activating the codepath that we now made exclusive for Linux for his platform.	2011-11-30 23:41:39 +01:00
David Kopf	fb977cb9ef	Better fix for hardware FCS error on JTAG reset ... Correct silly error introduced by trying to save two bytes.	2011-11-15 13:24:58 -05:00
David Kopf	31ba84eb75	Improve rf23x cca procesing ... Fix delay_loop timing bug by using long long calculation. 128rfa1 and rf230 both working with contikimac RDC	2011-11-14 11:49:58 -05:00
David Kopf	d1cd3f213c	Add general unsupported interrupt vector suggested by Daniel Willmann	2011-11-14 11:36:18 -05:00
David Kopf	6eba721af1	Add rtimer_arch_sleep function, enabled with RDC_CONF_MCU_SLEEP	2011-11-14 11:10:35 -05:00
David Kopf	c2364897f8	atmega128rfa1 cca fixes, energest and rimestat macros. ... Add option to return ACK to RDC layer when in extended mode, based on Georg von Zengen code.	2011-11-08 12:20:22 -05:00
Niclas Finne	bf299b1a07	Fixed splhigh/splx for the IAR compiler	2011-09-27 22:51:28 +02:00
Joakim Eriksson	5b1d9617c4	moved io and signal and IAR-GCC checks from driver files into contiki include file	2011-09-26 10:38:41 +02:00
Joakim Eriksson	95dde73618	fixed Sky platform for IAR compiler	2011-09-11 17:18:02 +02:00
David Kopf	f721f646fa	Adjust sleep time by ticks instead of seconds, proposed by Ivan Delamer	2011-09-10 12:44:49 -04:00
Adam Dunkels	4fd8133aa3	Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)	2011-09-05 20:42:19 +02:00
Mariano Alvira	43910c1be7	don't worry about wraparound in rtimer_arch_schedule	2011-09-02 12:36:10 -04:00
Mariano Alvira	6c0bbc492b	change mc1322x rtimers to 32-bit ... hardcode a close default value for the RTC	2011-09-02 12:32:47 -04:00
David Kopf	dfdae5b02b	This fixes commit 9a1ce7 for spaces instead of ....	2011-08-31 12:08:01 -04:00
David Kopf	470887eddd	Print elf size if ELF_SIZE is defined	2011-08-31 11:50:14 -04:00
David Kopf	9a1ce7cf75	Use enumerated tx return values	2011-08-31 11:40:23 -04:00
David Kopf	5f2b2074f0	Implement WITH_RPL option in makefile	2011-08-28 16:11:48 -04:00
David Kopf	bdec65b889	Fix typos and file endings	2011-08-28 16:04:36 -04:00
David Kopf	94fc40f736	Move LEDONPORTE1 define to contiki-conf.h, fixing typo.	2011-08-24 11:35:58 -04:00
David Kopf	09db159876	128rfa1 cca fix, NETSTACK_RADIO.off now returns 0/1 if radio off/on	2011-08-18 14:36:04 -04:00
David Kopf	53737d9a38	Use correct prescale factor	2011-08-18 13:58:20 -04:00
David Kopf	3ea102050b	Apply patch of Ivan Delamer for atmega1281 @ 4 MHz	2011-08-17 13:16:46 -04:00
David Kopf	36fa735323	Calculate best prescaler based on F_CPU and CLOCK_CONF_SECONDS. Inspired by patch from Ivan Delamer.	2011-08-17 13:15:26 -04:00
maniacbug	0990896f54	Added an .eu target to upload only the eeprom for AVR cpu.	2011-08-16 14:10:48 -04:00
maniacbug	8f0bb86c02	No strict aliasing for AVR ... AVR build generates numerous aliasing errors. This -f switch silences them.	2011-08-16 14:07:06 -04:00
David Kopf	577215deca	Use 128rfa1 interrupts instead of timing. ... Generalize DEBUGFLOW macro for use in multiple routines.	2011-08-15 15:06:38 -04:00
David Kopf	50d1086553	Add changes needed for contikimac	2011-08-13 11:38:38 -04:00
David Kopf	03ab525652	Option for nested rtimer interrupts	2011-08-13 11:35:03 -04:00
David Kopf	cdcb2c4744	CCA measurement was always returning busy	2011-08-06 13:48:52 -04:00
David Kopf	b70d2b3163	Remove duplicate code block	2011-08-05 17:34:38 -04:00
David Kopf	c9b19ce655	Change timer setups for arbitrary CLOCK_CONF_SECOND ... Change raven to 128 ticks and enable 32KHz crystal as default.	2011-08-05 15:14:35 -04:00
David Kopf	e2ad2acde4	Add stk500 platform and changes suggested by Daniel Willmann	2011-08-03 11:18:55 -04:00
David Kopf	6ec85fe079	Add Iris port of Shinta Hatatani	2011-08-03 10:17:59 -04:00
Mariano Alvira	2b9f4e8fed	Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x	2011-08-01 19:50:46 -04:00
David Kopf	cf3241c5db	Add file needed for rpl border router	2011-07-24 12:07:39 -04:00
David Kopf	0bb585fd60	Replace WEBSERVER by AVR_WEBSERVER	2011-07-24 11:43:17 -04:00
Simon Berg	506eced1bc	Bug fix by Jonathan Chung	2011-07-22 15:07:52 +02:00
Mariano Alvira	485d6716e0	Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x ... Conflicts: cpu/mc1322x/src/default_lowlevel.c	2011-07-18 07:25:19 -04:00
HATATANI Shinta	f4740a062a	IRIS port is working with uIPv6	2011-07-15 16:36:25 +09:00
Mariano Alvira	758fc37307	mc1322x: flush the rx fifos when full	2011-07-12 07:05:04 -04:00
Mariano Alvira	4cf9514aa9	fix gpio initialization for uart2	2011-07-09 14:33:03 -04:00
Mariano Alvira	6d96721ac4	mc1322x: block in uart putc if the TX buffer is full. Can also be ... configured to drop chars instead with UARTx_DROP_CHARS	2011-07-09 12:46:30 -04:00
Mariano Alvira	e80f9eb4b5	mc1322x: build fixes for uart2	2011-07-08 19:40:42 -04:00
Mariano Alvira	e2d74fa0a5	Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into uart-upstream ... Conflicts: cpu/mc1322x/lib/include/uart.h cpu/mc1322x/src/default_lowlevel.c	2011-07-08 19:21:15 -04:00
David Kopf	6ea7250af7	Change ctimer startup order, add multihop to wpcap and minimal-net platform.	2011-06-30 12:12:07 -04:00
David Kopf	c48b7ab78d	Add RPL nodes and border router to minimal-net platform (cygwin only)	2011-06-28 08:19:48 -04:00
David Kopf	6b434a553f	Implement SRAM routine of Georg von Zengen	2011-06-21 13:03:58 -04:00
Joakim Eriksson	af601dfb23	improved support for IAR compiler for z1	2011-06-05 00:21:47 +02:00
Mariano Alvira	33b32c61e9	Only insert an ack packet if the ack request bit is set	2011-06-01 13:47:05 -04:00
Joakim Eriksson	77ec0bfa0f	fixed the z1 platform and generic code used by z1 to work with IAR compiler	2011-05-25 17:21:51 +02:00
Mariano Alvira	724bcbd2d3	Merge remote branch 'libmc1322x/master' ... Conflicts: cpu/mc1322x/src/default_lowlevel.c	2011-05-14 21:19:47 -04:00
Joakim Eriksson	fd75050c67	Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki	2011-05-13 11:53:45 +02:00
Joakim Eriksson	2c16538e6a	fixed support for IAR compiler	2011-05-13 11:52:42 +02:00
Salvatore Pitrulli	7a48110067	STM32W flasher utilities for Linux and Windows merged into a single folder.	2011-05-10 19:26:33 +02:00
Mariano Alvira	0a2b86456b	add option to insert an ack packet on autoack	2011-05-08 09:50:57 -04:00
Mariano Alvira	65671c66c6	turn on insert ack packet by default	2011-05-08 09:50:57 -04:00
Joakim Eriksson	3fa8da5ddf	fixed IAR compilation paths	2011-05-02 15:19:28 +02:00
Salvatore Pitrulli	5eabf33211	Added functions for deep sleep to mbxxx platform.	2011-04-27 18:12:23 +02:00
Mariano Alvira	d80449244d	Merge remote branch 'libmc1322x/master'	2011-04-20 21:23:47 -04:00
Salvatore Pitrulli	01a7a78a94	Fixed temperature ADC conversion bug on mbxxx. ... The conversion was made from an incorrect source when the GPIO pin was not PB7. Added functions and macros used to select the correct ADC channel.	2011-04-20 18:06:20 +02:00
Salvatore Pitrulli	aa968309af	Merge remote branch 'sf/master'	2011-04-16 16:27:10 +02:00
Niclas Finne	813489633c	Added missing include	2011-04-15 15:49:43 +02:00
Salvatore Pitrulli	4ff82b76e5	Removed -fsigned-char GCC compiler options.	2011-04-14 08:12:11 +02:00
Salvatore Pitrulli	0105057c44	Removed unwanted file.	2011-04-14 08:10:58 +02:00
Salvatore Pitrulli	0a0ad39c9b	Added weak symbols for STM32W exception handlers and other minor updates for the HAL.	2011-04-14 08:06:13 +02:00
Salvatore Pitrulli	57163c616d	Removed some warnings.	2011-04-14 08:05:21 +02:00
Salvatore Pitrulli	af8e58e063	Set LED pins to output when MB851 is in sleep mode. ... This reduces power consumption.	2011-04-13 18:14:12 +02:00
dak664	2e14df3981	Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6.	2011-04-08 15:15:16 -04:00
Salvatore Pitrulli	6655c876f2	Added functions and example for deep sleep on mb851. ... The added function let a process to make the system go into deep sleep for maximum power saving. The udp-ipv6-example shows how to use these new functions.	2011-04-08 11:53:48 +00:00
dak664	89741bd322	Exit on watchdog reboot call	2011-04-07 17:47:54 -04:00
dak664	581d081ffe	Don't use RF230_CONF_CCA_THRES if it is not defined.	2011-04-07 17:44:10 -04:00
Joakim Eriksson	f603c965c1	Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki	2011-04-06 20:15:44 +02:00
Joakim Eriksson	928bf6b6c1	fixed cpu/msp430 for compilation with IAR compiler	2011-04-06 20:08:48 +02:00
Mariano Alvira	4f4e06c71b	Merge remote branch 'libmc1322x/master'	2011-04-06 05:56:06 -04:00
Oliver Schmidt	5da4faf71e	Allow VC++ to be used as alternative to GCC for building in the WIN32 target. ... TODOs: - Update README - Add dependency handling - Add rtimersupport	2011-04-03 22:32:11 +02:00
Oliver Schmidt	f83fb3704b	Replaced make-empty-symbols with empty-symbols.[c|h] ... The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.	2011-04-03 13:24:58 +02:00
dak664	a9cbbb4570	Add sneezer mode and tx power change	2011-03-23 18:08:07 -04:00
Mariano Alvira	11f5bca7c4	Merge remote branch 'libmc1322x/master' ... Conflicts: cpu/mc1322x/board/redbee-econotag.h	2011-03-22 16:28:08 -04:00
Salvatore Pitrulli	eb588f1aec	New HAL and SimpleMAC for STM32W108.	2011-03-22 19:35:49 +01:00
dak664	5dd7500d0b	Add configurable auto cca threshold and implement driver cca call. ... Show smallest rssi in jackdaw menu.	2011-03-21 11:10:30 -04:00
dak664	d9b5bac953	Refactor with WATCHDOG_CONF_TIMEOUT	2011-03-14 16:14:47 -04:00
Mariano Alvira	74517b9df4	Merge remote branch 'libmc1322x/master'	2011-03-13 17:14:32 -04:00
dak664	59109b9893	Fix type, diagnostic interrupt code on conditional	2011-03-13 14:08:02 -04:00
dak664	a210e14d78	Add defines for watchdog configuration.	2011-03-13 13:45:12 -04:00
dak664	0b2d3d1615	Refactor clock code with optional interrupt optimizing. ... Put periodic radio calibration on conditional.	2011-03-13 13:07:32 -04:00
dak664	0573ecd62f	Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki	2011-03-11 16:51:10 -05:00
dak664	bf5be5056f	Testing $OS works with cygwin and DOS command windows	2011-03-11 16:50:35 -05:00
Mariano Alvira	f2b92cfa98	mc1322x: remove bad rule from cpu Makfile	2011-03-11 16:32:25 -05:00
Mariano Alvira	59d7fad746	Merge remote branch 'libmc1322x/master'	2011-03-11 16:28:14 -05:00
dak664	6a5c8ff1c4	Include file needed for slip rpl-border-router build	2011-03-11 14:10:30 -05:00
Mariano Alvira	a1ae79307b	mc1322x: remove auto reception mode as it appears to be the cause of ... the periodic autoack checksum errors. removing auto mode doesn't seem to create any performance issue.	2011-03-11 06:28:47 -05:00
dak664	bb574fd1e2	Don't create an object directory if target does not exist	2011-03-10 14:59:21 -05:00
Mariano Alvira	5208aa14ea	mc1322x: remove auto reception mode as it appears to be the cause of ... the periodic autoack checksum errors. removing auto mode doesn't seem to create any performance issue.	2011-03-08 15:36:53 -05:00
dak664	de7bcda99f	avrdude and makefile changes suggested by Georg von Zengen	2011-03-08 13:07:00 -05:00
Mariano Alvira	fa08b09770	Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into update-lib	2011-03-07 12:37:26 -05:00
Mariano Alvira	2c79ab4962	mc1322x: increase the heap to 4K	2011-03-05 16:52:35 -05:00
Mariano Alvira	befbd4a479	mc1322x: handle board file differently if cygwin	2011-03-04 16:54:59 -05:00
Fredrik Osterlind	dd7cec737d	removed obsolete leds_[color]() functions, replaced by leds_{on,off}() ... allow LEDS_[COLOR] to be configured by platform-conf	2011-03-03 17:48:32 +01:00
Mariano Alvira	f0c27340c6	mc1322x: increase the HEAP to 2048 bytes: needed for COAP server.	2011-02-25 16:10:08 -05:00
Mariano Alvira	bea643bc4a	mc1322x: flush the radio rx queue in the receive process	2011-02-23 15:19:45 -08:00
Mariano Alvira	c12ab0d484	mc1322x: get the tx status for a packet and return the proper response.	2011-02-23 15:19:44 -08:00
Mariano Alvira	535b9d35d7	mc1322x: disable broken maca calls for now. ... maca_on, maca_off, and contiki_maca_init don't work correctly; they mess up address filtering. disable them for now and fix them later.	2011-02-23 15:19:44 -08:00
dak664	46297de770	Allocate variable only when mass storage is enabled	2011-02-23 14:06:06 -05:00
Mariano Alvira	c857e57d2f	msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h	2011-02-21 09:23:52 -08:00
Mariano Alvira	8f9cf50e55	set timestamp packet attribute	2011-02-18 12:46:34 -05:00
Mariano Alvira	a86a0fbe0e	set lqi packet attribute	2011-02-18 12:46:10 -05:00
Mariano Alvira	07f77b02eb	Merge remote branch 'libmc1322x/master'	2011-02-18 12:38:30 -05:00
Mariano Alvira	2e331b51e8	Merge remote branch 'libmc1322x/master' into update-libmc1322x ... Conflicts: cpu/mc1322x/COPYING	2011-02-17 14:41:47 -05:00
Mariano Alvira	2e33e1694a	Merge branch 'libmc13-9f82e068' into update-libmc1322x	2011-02-17 14:39:20 -05:00
Mariano Alvira	7cdfbb0947	remove cvs keywords from cpu/mc1322x	2011-02-17 14:36:55 -05:00
Mariano Alvira	bfb471c782	add proper arm flags and remove Makefile.src as it's not used.	2011-02-08 09:55:50 -05:00
Mariano Alvira	b1dd3fc063	use the CS toolchain by default: ... http://www.codesourcery.com/sgpp/lite/arm/portal/release642	2011-02-08 09:55:23 -05:00
Mariano Alvira	81552d1f6d	add a tutorial for rest-example	2011-02-08 09:08:05 -05:00
Mariano Alvira	5c3ef556d9	add a dummy io.h for mc13224v	2011-02-08 09:07:54 -05:00
Mariano Alvira	f5ba70cd20	add heap and _sbrk to mc13224v	2011-02-08 09:07:23 -05:00
Mariano Alvira	9572baa71b	fix mc13224v led driver to only touch gpio used for leds.	2011-02-08 09:07:11 -05:00
dak664	5c098993df	Add initial file	2011-02-07 20:30:47 -05:00
dak664	b41e8f384e	Add initial atmega128rfa1 file	2011-02-07 20:28:17 -05:00
dak664	f1f32c8e6a	Add combined MCU and radio ATmega128rfa1	2011-02-07 13:46:34 -05:00
Mariano Alvira	2a75a4a5df	this fixes a major problem with the maca_process ... Before it didn't do process_poll like it should and would add events out of turn and mess up the event processor --- that would cause the button to stop working after the unhandled events exceeded a max number this fixes maca_process to do a process_poll as it should. now the button works fine and so does the radio.	2011-02-03 18:09:51 -05:00
oliverschmidt	8c87f85a1d	Made cc65 build compatible with make.exe from GnuWin32 and cmd.exe. We just live without the phony targets when building with cmd.exe - the next cc65 release will make the whole sed thingy obsolete anyway :-)	2011-01-23 16:30:30 +00:00
joxe	801a7e1149	fixed bug with uart DMA	2011-01-19 20:44:20 +00:00
salvopitru	5fcae86be3	Now it is putchar that has to be redefined (instead of __io_putchar), like other platforms.	2011-01-19 09:13:06 +00:00
adamdunkels	8f283b3989	Bugfix	2011-01-19 07:30:31 +00:00
adamdunkels	6f076dbe1a	A set of compiler options that reduce the size of the final code size and RAM usage with ~10%. Courtesy of Simon Duquennoy.	2011-01-19 07:24:37 +00:00
maralvira	68180c0574	use network 230 --- 802.15.4 no-FCS	2011-01-18 16:58:18 +00:00
adamdunkels	bb2e3b25bd	Larger default DMA tx buffer size, to allow SLIP operation. Warn if DMA is enabled, since MSPsim does not yet support it.	2011-01-18 16:07:16 +00:00
maralvira	ce92a90e58	new timer setup routines.	2011-01-17 15:51:19 +00:00
maralvira	b3c8c14b7d	add timer setup routines	2011-01-17 15:51:02 +00:00
maralvira	ca098db611	fix a race condition regarding advancement of the softclock. Without ... this, the advancment would fail to trigger a tx cycle occasionally. This would cause the packet to get deferred until the next expiration of the softclock.	2011-01-17 15:49:17 +00:00
maralvira	40bb4b80dc	whitespace fixup to sync with libmc1322x	2011-01-17 15:48:39 +00:00
maralvira	6fb75263f9	fix parsing and pcap generation for packets with multiple output lines ... (those that are > 16 bytes).	2011-01-17 15:47:23 +00:00
maralvira	d82b004154	fix parsing and pcap generation for packets with multiple output lines ... (those that are > 16 bytes).	2011-01-17 15:47:08 +00:00
maralvira	d0227afbed	cycle channel on keypress.	2011-01-17 15:46:27 +00:00
maralvira	c78e1e345e	add stdint.h	2011-01-17 15:45:02 +00:00
maralvira	0445a4f78f	add cmdline options to set the intercharacter delays.	2011-01-17 15:44:18 +00:00
maralvira	fb8c08ca7c	only use these stubs with linux toolchains	2011-01-17 15:42:24 +00:00
salvopitru	9aa734936f	RANDOM_MAX changed to RANDOM_RAND_MAX.	2011-01-17 10:08:14 +00:00
salvopitru	fb75503624	'BTM' can be defined to flash devices already in bootloader mode. ... COFFEE_FILES changed to COFFEE.	2011-01-17 09:41:47 +00:00
salvopitru	a9b1b37bec	Added definition of BAUD2UBR macro.	2011-01-17 09:22:24 +00:00
adamdunkels	f002563e60	Tx on interrupts occasionally misses characters on output. Therefore we turn it off by default.	2011-01-09 20:44:14 +00:00
ksb	eb24078ffb	Converted CRLF line endings to LF	2011-01-05 17:16:42 +00:00
joxe	5b7b3da99c	minor fixes of DMA uart code	2011-01-05 13:36:38 +00:00
joxe	565fda47aa	added initial uart1 DMA rx support and required LPM requirements api	2011-01-05 12:02:01 +00:00
dak664	90a6d768ea	Keep track of sleeptime and display on status web page.	2010-12-23 19:41:07 +00:00
dak664	662b0e064c	Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes.	2010-12-22 22:49:16 +00:00
dak664	95982b40ba	$make will show avr-size once and only once whether or not a build needs to occur.	2010-12-22 21:13:09 +00:00
dak664	5b8e62ef4f	Patches from R Larsson	2010-12-22 20:10:00 +00:00
dak664	013c3ac2f8	Remove contitional on clock updating, it should always be done after a sleep!	2010-12-22 17:09:03 +00:00
dak664	44a2e34005	Resolve TIMER2 conflict between sleep and possible clock usage.	2010-12-22 16:50:30 +00:00
dak664	e3e1e04948	Add FCS comments and text2pcap dump routines of Roger Larsson. ... Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.	2010-12-21 04:25:15 +00:00
dak664	e4b0b3dc8c	Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will.	2010-12-18 20:51:11 +00:00
dak664	5623ad827b	Enable radio off and sleep modes.	2010-12-18 20:49:00 +00:00
adamdunkels	f370b217a5	Turned up the rtimer resolution to 32678 Hz.	2010-12-16 22:50:21 +00:00
adamdunkels	1d090ea0f5	Made configuration of CC2420 SFD timestamps easier	2010-12-16 22:49:33 +00:00
adamdunkels	c0fedd7661	Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module	2010-12-16 22:49:12 +00:00
dak664	570f6e705f	Move conditional needed by previous commit.	2010-12-15 19:32:49 +00:00
dak664	aa7ad8c807	Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.	2010-12-15 16:50:44 +00:00
salvopitru	d0db3fc39a	Added a check for Coffee start address.	2010-12-15 15:01:00 +00:00
dak664	1cc336f188	Conditional code to use hardware multiply by default.	2010-12-15 14:11:06 +00:00
salvopitru	5fe80dd99d	Added elfloader machine dependent code for STM32W.	2010-12-15 11:10:20 +00:00
dak664	c784e8bc46	Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register	2010-12-14 22:34:18 +00:00
dak664	9c9d7ec5e9	Return TRAC_STATUS register when tx autoretry is enabled.	2010-12-05 17:28:29 +00:00
dak664	35b2ce0cdb	Add status page link, show correct rssi, fix indexing off array in ipv4 builds	2010-12-04 21:32:35 +00:00
dak664	58b7a19803	Hardware/software radio HAL patch from Roger Larsson. ... Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26. Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.	2010-12-03 20:42:01 +00:00
dak664	21b10e8021	Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Sch�fer	2010-12-03 18:16:56 +00:00
dak664	0ba9846abd	Add macros by Roger Larsson to select between hardware or software SPI transactions. ... Minor speed optimizations.	2010-11-30 19:47:40 +00:00
nifi	7110afdad5	added missing include	2010-11-27 15:27:20 +00:00
dak664	dc028b3f85	Get rssi correctly in either rx mode, clean up radio driver debugging	2010-11-26 20:39:15 +00:00
adamdunkels	149f4e8d21	Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers	2010-11-25 09:22:56 +00:00
dak664	880233a451	RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.	2010-11-24 18:46:57 +00:00
adamdunkels	4fac3037e0	Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash.	2010-11-15 21:52:54 +00:00
dak664	69ef9d57eb	sizeof(*) is sizeof first array element	2010-11-12 17:24:36 +00:00
dak664	9e94ba9803	Allow non-ipv6 build, e.g. Hello World	2010-11-12 17:15:00 +00:00
nifi	5de83c9085	Only include code for stack printouts when needed	2010-11-12 15:54:41 +00:00
maralvira	3426eae031	fix typos	2010-11-11 20:37:33 +00:00
maralvira	9b2a2bb5e6	fix up stdint include	2010-11-10 22:12:29 +00:00
maralvira	6da84819dd	use stdint.h instead of custom types.h ... stdint.h is more portable across compilers	2010-11-10 22:06:28 +00:00
maralvira	e229022f38	include crm.h	2010-11-10 21:58:12 +00:00
salvopitru	28e1445a0f	Added a simple implementation of Coffee for STM32W108.	2010-11-10 11:20:44 +00:00
maralvira	dfbc81158b	Allow CROSS to be overridden with CROSS or CROSS_COMPILE	2010-11-09 13:13:45 +00:00
maralvira	1aac14f252	add tutorial explaining how to set up an RPL network of econotags	2010-11-09 01:30:01 +00:00
maralvira	3b515587c5	change how prepare and transmit work --- Contiki expects to call ... prepare once and then transmit many times to repeat the same packet over and over. This didn't work like that, but now it does.	2010-11-07 20:07:42 +00:00
maralvira	e029fa8da0	fix defines for raw mode	2010-11-07 18:34:52 +00:00
maralvira	4664151419	fix build errors with start.S	2010-11-07 15:19:45 +00:00
maralvira	29333232d5	add section .start and undef _start so that _start is placed by the ... linker correctly	2010-11-07 14:57:53 +00:00
maralvira	b8ebce0fef	add a memory section for RAM so that the linker will warn when you've ... made your program too big.	2010-11-07 14:54:05 +00:00
maralvira	8385536c41	fix how start object is linked	2010-11-07 14:52:23 +00:00
maralvira	f38598ce9f	clear BSS	2010-11-07 14:49:42 +00:00
maralvira	57513948c9	Move stack near BSS so it doesn't take up space in the .bin	2010-11-07 14:48:52 +00:00
maralvira	77cf0f0f5e	update ring_osc_on and _off to the new bit structs	2010-11-07 14:42:31 +00:00
maralvira	c8056cc4e2	define TCF TCF1 and TCF2 --- the new bit structs don't work here for ... some reason.	2010-11-07 14:42:02 +00:00
maralvira	dab7faf13c	Add gpio_set and gpio_reset ... Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx). These macros efficiently set the DATA_SET and DATA_RESET bits without reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do	2010-11-07 14:29:04 +00:00
maralvira	4a4a39c84a	Name the GPIO structure so we can set multiple bits at once	2010-11-07 14:28:30 +00:00
maralvira	4217eb2ebc	Provide a function to change timer interrrupt handlers ... Function irq_register_timer_handler(int timer, void (*isr)(void)) lets you change the handler at runtime. This lets us set handlers without necessarily knowing the name at link-time. The old way of having weakly-linked tmr0_isr functions should still work.	2010-11-07 14:27:01 +00:00
maralvira	65d3942c76	Add the disable_int({}) macro ... This is similar to safe_irq_enable and disable	2010-11-07 14:26:24 +00:00
maralvira	83e6995af1	Add TMR_ADDR helper	2010-11-07 14:25:07 +00:00
maralvira	d930ce0e2b	Add some useful timer macros	2010-11-07 14:24:36 +00:00
maralvira	5e00219a9c	Register definitions: get rid of some macro magic that doesn't help much ... Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.	2010-11-07 14:24:11 +00:00
maralvira	091e4cd84e	Add structure-based ITC access	2010-11-07 14:23:15 +00:00
maralvira	11ac20a361	REF_OSC is a 32-bit number, not 64-bit number	2010-11-07 14:22:51 +00:00
maralvira	745e7b5ac2	Add cal_isr() support	2010-11-07 14:21:59 +00:00
maralvira	ab84453401	Add structure-based CRM definitions	2010-11-07 14:21:33 +00:00
maralvira	9d072d5309	Add macro to help compute TMR.ENBL values (useful when using #defined ... values to represent timers)	2010-11-07 14:21:06 +00:00
maralvira	85e6b06175	Add pin definitions for each timer, they're fixed	2010-11-07 14:19:17 +00:00
maralvira	8d2f740f7f	Fix #ifdefs in board files	2010-11-07 14:18:54 +00:00
maralvira	3726588f02	Add structure-based GPIO register definitions	2010-11-07 14:17:45 +00:00
maralvira	20b477db13	Add structure-based timer register definitions	2010-11-07 14:17:20 +00:00
maralvira	c71a0243ff	Add missing type for TMR0_COMP2	2010-11-07 14:16:28 +00:00
maralvira	62a45c7ba2	Add script to invoke kermit with a particular port and speed	2010-11-07 14:15:40 +00:00
maralvira	2ac88222f6	Use "rm -f" in clean rules to ignore errors	2010-11-07 14:14:47 +00:00
maralvira	2e87143381	use kermit in open-terms	2010-11-07 14:13:22 +00:00
maralvira	c8be3047c3	fix byte ordering in burn-macs	2010-11-07 14:12:55 +00:00
maralvira	0450b3fd90	add script that burns the mac address only --- mac address is Redwire ... IAB + tty number.	2010-11-07 14:12:27 +00:00
maralvira	f913cf728b	modify flasher.c to not create a vaild boot magic number if the length ... of the file is zero modify mc1322x-load.pl to optionally send a zero length file with -z; extra data on the command line is still written. This allows you to burn the mac adress without flashing a vaild image.	2010-11-07 14:11:50 +00:00
maralvira	9f7d860e9c	add scripts to help load a bunch of econotags	2010-11-07 14:11:18 +00:00
maralvira	8b2ef2675d	discard received packets --- this lets you run multiple rftest-tx's at ... the same time.	2010-11-07 14:10:16 +00:00
maralvira	e00349509d	add simple install rule	2010-11-07 14:09:43 +00:00
maralvira	ee943c062d	add autoreset command and do_exit option	2010-11-07 14:08:50 +00:00
maralvira	e886e83908	fix bug in print_packet ... Thanks dean and jim.	2010-11-07 14:07:33 +00:00
maralvira	f1fede7090	get LQI of received packets	2010-11-07 14:06:57 +00:00
maralvira	ae0b7f846f	Fix the CNTR defines. ... Thanks to Ruslan for finding this.	2010-11-07 14:04:59 +00:00
maralvira	646a37f8b3	use the hardware random number generator	2010-11-07 13:52:12 +00:00
dak664	eb0d5c7f45	Add missing includes	2010-11-03 16:55:40 +00:00
oliverschmidt	1dfe490f9b	Use some defined event constant instead of just 0.	2010-10-31 22:51:17 +00:00
dak664	9194b3ac69	Fix error when RS232 not enabled	2010-10-28 19:31:28 +00:00
dak664	ad6712736b	Fix Windows XP RNDIS+CDC serial port enumeration	2010-10-28 19:30:14 +00:00
dak664	258e3cc93a	Allow simultaneous use of RS232 and USB serial ports	2010-10-27 14:51:20 +00:00
salvopitru	d8711d32a3	Added configuration in order to run Rime.	2010-10-27 14:05:23 +00:00
salvopitru	db3f1864a0	Increased minimum stack size, because rpl uses it much more.	2010-10-26 11:07:20 +00:00
salvopitru	33ccbbb509	Fixed compile error raised after rand.c removal.	2010-10-26 10:47:23 +00:00
salvopitru	444a00949a	Added missing libraries.	2010-10-26 10:24:17 +00:00
salvopitru	790f13a689	More safe detection of cygwin path.	2010-10-26 07:26:40 +00:00
salvopitru	ec5e3ce0d7	New Contiki port to STM32W108.	2010-10-25 09:03:38 +00:00
adamdunkels	34f6a60a4a	By default, don't print stack on reboot, since there are cases where this may hang the CPU (when the CPU is in LPM when the watchdog triggers). Must fix the code to set the UART and CU into correct modes before enabling stack printout on reboot.	2010-10-24 21:10:25 +00:00
oliverschmidt	9a8c62a629	Removed remark on using cc65 snapshot.	2010-10-23 19:42:53 +00:00
dak664	123e3cae41	Fix compiler warnings	2010-10-23 15:26:46 +00:00
oliverschmidt	5e10cf2eed	Implemented cfs_opendir() and friends for CBMs based on cc65's cbm_opendir() and friends.	2010-10-23 13:48:06 +00:00
oliverschmidt	9e9eb4b55c	There's no point in pulling in cfs-posix-dir.c if the POSIX functions it depends on are dummies anyway.	2010-10-23 08:17:45 +00:00
oliverschmidt	b84f771c6b	The recent change in core/net/mac/lpp.c requires CLOCK_SECOND to be at least twice NETSTACK_RDC_CHANNEL_CHECK_RATE in order to compile.	2010-10-22 20:28:58 +00:00
dak664	7be7a34bbb	Fix windows COM port enumeration	2010-10-22 19:15:43 +00:00
dak664	774474b7aa	Fix compiler warning	2010-10-20 18:57:33 +00:00
oliverschmidt	842c6a018a	The recent global change regarding htons allowed to remove this hack :-)	2010-10-19 20:30:47 +00:00
adamdunkels	5585d72c86	A simple but substantial change: uIP used the htons()/HTONS() macro ... functions for converting between host and network byte order. These names are the de facto standard names for this functionality because of the original BSD TCP/IP implementation. But they cause problems for uIP/Contiki: some platforms define these names themselves (Mac OS, most notably), causing compilation problems for Contiki on those platforms. This commit changes all htons to uip_htons instead. Same goes for htonl, ntohs, and ntohl. All-caps versions as well.	2010-10-19 18:29:03 +00:00
oliverschmidt	35f7b6046e	Fixed 'Modulo operation with zero' error by making sure that NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE is not smaller than CLOCK_CONF_SECOND.	2010-10-06 19:48:26 +00:00
oliverschmidt	a40594b7ce	Display correct name of statically loaded driver.	2010-09-29 21:48:54 +00:00
oliverschmidt	c839eacbdf	Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/.	2010-09-29 19:44:01 +00:00
oliverschmidt	55d61d317b	Allow cc65 ethernet drivers to be loaded statically instead of dynamically. This saved quite some space in scenarios without additional cc65 drivers to be loaded for i.e. a mouse because in those scenarios the cc65 module loader isn't necessary. And without the module loader typically the cc65 heap manager isn't necessary.	2010-09-28 23:02:16 +00:00
adamdunkels	7c14899eeb	Made stack printout on reboot configurable. ... Added the ability to turn on watchdog multiple times - the watchdog registers are touched only when the watchdog goes from off to on state to avoid retriggering the watchdog when it shouldn't.	2010-09-22 22:12:37 +00:00
dak664	110bc0242e	Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum	2010-09-17 21:59:09 +00:00
nifi	f5ea831445	Added function rtimer_arch_now that makes sure that the timer value does not change between readouts to avoid reading while the timer is being updated.	2010-09-13 20:51:09 +00:00
maralvira	1cb0762bd0	Don't post from an interrupt context --- this resulted in process ... corruption if a packet was received at the wrong time. The maca_thread now just PAUSEs and checks rx_head instead of waiting for a data event to be posted.	2010-09-13 14:15:58 +00:00
joxe	c0549cad3d	added some files for MSP430X I/O	2010-08-24 16:23:20 +00:00
maralvira	df9d43ab83	increase the reception time now that tx_packet will advance the timer ... as necessary.	2010-07-28 18:49:34 +00:00
maralvira	9a7a2742b3	remove bad call to maca_on() ... maca_on() resets the maca and phy, takes a long time, and clobbers any packet that is currently being transmitted or received. It doesn't belong in prepare and was the source of a lot of latency and bad packet transmissions. Make sure the maca is on somewhere else.	2010-07-28 18:48:51 +00:00
maralvira	a3b9c2adb0	in tx_packet, force an interrupt if the maca isn't doing anything so ... that the transmit starts. Or if the maca is in a reception cycle, advance the softclock timeout to now so that transmission starts as soon as possible (immediately if a packet isn't being received or right after reception finishes).	2010-07-28 18:48:03 +00:00
maralvira	593a50c38f	make the debug prints in check_maca more specific	2010-07-28 18:47:35 +00:00
maralvira	422d05003f	use 32 packets in the pool by default	2010-07-28 18:47:05 +00:00
maralvira	eb0e3b7989	fix long standing bug where the last pages of NVM were not erased ... properly.	2010-07-28 18:43:04 +00:00
oliverschmidt	c602c61468	Activated Platform-specific File System (PFS) for the C64/C128 by default for all programs with R/W CFS access.	2010-07-22 10:30:12 +00:00
oliverschmidt	9c0f5d857c	Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t.	2010-07-21 22:35:59 +00:00
maralvira	5b44d6a29a	properly drop characters when buffer is full ... fix by David Kopf	2010-07-06 13:39:34 +00:00
joxe	0c5390339f	updated to new cc2420 spi naming	2010-06-23 10:44:41 +00:00
joxe	705f8cc451	fixed naming of SPI and CC2420 related code	2010-06-23 10:19:15 +00:00
dak664	898c00b812	Remove usually extra avr-size command	2010-06-22 17:11:38 +00:00
dak664	e45b1c042b	TIMER2 uses TIMER2 interrupt vector!	2010-06-22 16:17:24 +00:00
dak664	ab7f3bd8e3	Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen.	2010-06-18 17:30:30 +00:00
dak664	cb45883970	Turn on DEBUGFLOW and software CRC computation	2010-06-18 15:44:53 +00:00
nifi	20c8b4f9c6	removed obsolete comments	2010-06-15 13:30:42 +00:00
adamdunkels	3fa8ffda1a	Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific	2010-06-14 19:19:16 +00:00