Fixed quick dco sync to also work with mspgcc

This commit is contained in:
Niclas Finne 2011-09-22 16:43:59 +02:00
parent 8aa1011c03
commit cd4be4927a

View file

@ -37,6 +37,9 @@
int msp430_dco_required;
#endif /* DCOSYNCH_CONF_ENABLED */
#if defined(__MSP430__) && defined(__GNUC__)
#define asmv(arg) __asm__ __volatile__(arg)
#endif
/*---------------------------------------------------------------------------*/
#if defined(__MSP430__) && defined(__GNUC__) && MSP430_MEMCPY_WORKAROUND
void *
@ -68,36 +71,25 @@ w_memset(void *out, int value, size_t n)
void
msp430_init_dco(void)
{
#if CONTIKI_TARGET_WISMOTE && defined(__IAR_SYSTEMS_ICC__)
/* set to 8 MHz 244 * 32768 ? */
/* set to 8 MHz 244 * 32768 (or 0x107a)? */
#ifdef __MSP430X__
#ifdef __IAR_SYSTEMS_ICC__
__bis_SR_register(SCG0);
#else
asmv("bis %0, r2" : : "i" (SCG0));
#endif
UCSCTL0 = 0x0000;
UCSCTL1 = DCORSEL_4;
UCSCTL2 = 244 * 2; //0x107a;
UCSCTL2 = MSP430_CPU_SPEED / 32768;
UCSCTL4 = 0x33; /* instead of 0x44 that is DCO/2 */
#ifdef __IAR_SYSTEMS_ICC__
__bic_SR_register(SCG0);
#elif CONTIKI_TARGET_WISMOTE
// Stop watchdog
WDTCTL = WDTPW + WDTHOLD;
/** Configure XTAL **/
P7SEL |= BIT0 + BIT1; // Activate XT1
UCSCTL6 &= ~XT1OFF; // Set XT1 On
UCSCTL6 |= XT1DRIVE_2 | XTS | XT2OFF; // Max drive strength, adjust
UCSCTL6 &= ~XT1DRIVE_1;
do {
UCSCTL7 &= ~(XT2OFFG + XT1LFOFFG + XT1HFOFFG + DCOFFG);
// Clear XT2,XT1,DCO fault flags
SFRIFG1 &= ~OFIFG; // Clear fault flags
}while (SFRIFG1&OFIFG); // Test oscillator fault flag
UCSCTL2 = FLLD0 + FLLD2;
UCSCTL5 |= DIVA__2 + DIVS__2+ DIVM__2;//DIVPA__32 + DIVA__32 + DIVS__2+ DIVM__2;
UCSCTL4 = SELA__DCOCLKDIV + SELS__XT1CLK + SELM__XT1CLK; // Set MCLCK = XT1/2 , SMCLK = XT1/2 , ACLK = XT1/2
#else
asmv("bic %0, r2" : : "i" (SCG0));
#endif
#else
/* This code taken from the FU Berlin sources and reformatted. */
@ -206,6 +198,16 @@ init_ports(void)
P6OUT = 0;
#endif
#ifdef P7DIR
P7DIR = 0;
P7OUT = 0;
#endif
#ifdef P8DIR
P8DIR = 0;
P8OUT = 0;
#endif
P1IE = 0;
P2IE = 0;
}
@ -272,7 +274,6 @@ msp430_cpu_init(void)
* runtime.
*/
#if defined(__MSP430__) && defined(__GNUC__)
#define asmv(arg) __asm__ __volatile__(arg)
void *
sbrk(int incr)
{