Commit graph

1417 commits

Author SHA1 Message Date
David Kopf 59e459e0e9 Add missing mtarch_stop function 2012-02-21 11:11:53 -05:00
David Kopf 6e45dfe5ff PROGMEM changes needed for newer avr-gcc compiler 2012-02-21 11:10:57 -05:00
Nicholas J Humfrey 1cda3da17e Converted u8_t to uint8_t and u16_t to uint16_t in the cpu directory. 2012-02-21 08:33:24 -05:00
Mariano Alvira 68591919e6 mc1322x: add -MMD to Makefile.mc1322x to correctly create dependencies 2012-02-16 11:17:15 -05:00
Mariano Alvira 43062b6d74 mc1322x: change how board.h works to allow default board.h (defaults
to econotag)
2012-02-13 10:01:36 -05:00
Mariano Alvira ee8f2c669e mc1322x: remove symbols.{c,h} 2012-02-13 10:01:36 -05:00
David Kopf 9d6542d49b Fix minimal-net webserver6, broken after native border router changes. 2012-02-11 15:03:24 -05:00
David Kopf 38267bfd5a Webserver-nano: Add page load times, remove workaround code for bug in arm strformat.c, correct the double count of leading zeros there. 2012-02-11 14:58:35 -05:00
David Kopf 987906be97 rf230bb updates: involves setting the 801.15.4 pending bit,
0x800000 cpu clock, and a jtag reset bugfix
2012-02-01 14:16:39 -07:00
Ivan Delamer 57e686179c Improved rf230bb.c synchronization/locking. Removed unnecessary locks
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
2012-02-01 13:37:45 -07:00
David Kopf 7ca141b457 Access uart registers directly instead of through intermediate addresses in a RAM struct.
Add a platform define to reduce the number of ports supported by the cpu.
2012-01-21 13:49:58 -05:00
Niclas Finne f26920ae9b Define the BV macro if not already defined 2012-01-11 08:46:16 +01:00
David Kopf 58298f59db Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
2012-01-10 12:42:27 -05:00
Niclas Finne f3db12c19d MSP430 setup for f2xxx based on Z1 2012-01-09 14:56:03 +01:00
Niclas Finne 9ffcd53868 Fixed compiler warning (with IAR compiler) 2012-01-09 14:56:00 +01:00
Niclas Finne 3daa822f89 Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc) 2012-01-09 14:55:57 +01:00
Niclas Finne fd81a0d393 Minor cleanup (avoid setting some compiler flags twice) 2012-01-09 14:55:54 +01:00
Niclas Finne 8e1e12dfd3 Ignore SMALL when using IAR compiler 2012-01-09 14:55:48 +01:00
Nicolas Tsiftes eba64bdc5e Be more explicit with the relationship between inheritance between MSP430 families. 2012-01-09 14:55:45 +01:00
Niclas Finne cdfa8708e3 * Added f2xxx for two series (for example z1)
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
2012-01-09 14:54:57 +01:00
Niclas Finne f4f84ffca4 Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X 2012-01-09 14:54:01 +01:00
Niclas Finne 09082f02fe Changed clock_delay to use the nop instruction 2012-01-09 14:49:39 +01:00
Niclas Finne cd4be4927a Fixed quick dco sync to also work with mspgcc 2012-01-09 14:41:42 +01:00
Niclas Finne 708f9d77d2 Corrected timing for higher CPU speed 2012-01-09 14:41:36 +01:00
Niclas Finne 05b10eb9ce Initial WiSMote port based on code from Arago Systems. 2012-01-09 12:25:06 +01:00
Niclas Finne 367c82a5ab added compiler flags and macros for IAR and mspgcc 4.4.5 compilers 2012-01-09 12:24:33 +01:00
David Kopf b251619a2f Add wpcap for cygwin/Windows native border router 2012-01-08 13:37:56 -05:00
Fredrik Osterlind 2644057fb2 using dma by default 2011-12-21 10:53:18 +01:00
David Kopf 81af871db9 Bugfix: use 16 bit tick count to adjust clock after sleep 2011-12-01 09:58:55 -05:00
Oliver Schmidt e38f008b9b The dependency on the ucontext functions has the potential to keep others from successfully using cpu/native for other platforms. As the Contiki multithreading library typically isn't used at all it's not worth the trouble. So we just limit it to Windows and Linux - where it is known to not only build but actually work. If someone needs the Contiki cpu/native multithreading library on another platform he's certainly welcome to add that platform - hopefully by just activating the codepath that we now made exclusive for Linux for his platform. 2011-11-30 23:41:39 +01:00
David Kopf fb977cb9ef Better fix for hardware FCS error on JTAG reset
Correct silly error introduced by trying to save two bytes.
2011-11-15 13:24:58 -05:00
David Kopf 31ba84eb75 Improve rf23x cca procesing
Fix delay_loop timing bug by using long long calculation.
128rfa1 and rf230 both working with contikimac RDC
2011-11-14 11:49:58 -05:00
David Kopf d1cd3f213c Add general unsupported interrupt vector suggested by Daniel Willmann 2011-11-14 11:36:18 -05:00
David Kopf 6eba721af1 Add rtimer_arch_sleep function, enabled with RDC_CONF_MCU_SLEEP 2011-11-14 11:10:35 -05:00
David Kopf c2364897f8 atmega128rfa1 cca fixes, energest and rimestat macros.
Add option to return ACK to RDC layer when in extended mode, based on Georg von Zengen code.
2011-11-08 12:20:22 -05:00
Niclas Finne bf299b1a07 Fixed splhigh/splx for the IAR compiler 2011-09-27 22:51:28 +02:00
Joakim Eriksson 5b1d9617c4 moved io and signal and IAR-GCC checks from driver files into contiki include file 2011-09-26 10:38:41 +02:00
Joakim Eriksson 95dde73618 fixed Sky platform for IAR compiler 2011-09-11 17:18:02 +02:00
David Kopf f721f646fa Adjust sleep time by ticks instead of seconds, proposed by Ivan Delamer 2011-09-10 12:44:49 -04:00
Adam Dunkels 4fd8133aa3 Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE) 2011-09-05 20:42:19 +02:00
Mariano Alvira 43910c1be7 don't worry about wraparound in rtimer_arch_schedule 2011-09-02 12:36:10 -04:00
Mariano Alvira 6c0bbc492b change mc1322x rtimers to 32-bit
hardcode a close default value for the RTC
2011-09-02 12:32:47 -04:00
David Kopf dfdae5b02b This fixes commit 9a1ce7 for spaces instead of .... 2011-08-31 12:08:01 -04:00
David Kopf 470887eddd Print elf size if ELF_SIZE is defined 2011-08-31 11:50:14 -04:00
David Kopf 9a1ce7cf75 Use enumerated tx return values 2011-08-31 11:40:23 -04:00
David Kopf 5f2b2074f0 Implement WITH_RPL option in makefile 2011-08-28 16:11:48 -04:00
David Kopf bdec65b889 Fix typos and file endings 2011-08-28 16:04:36 -04:00
David Kopf 94fc40f736 Move LEDONPORTE1 define to contiki-conf.h, fixing typo. 2011-08-24 11:35:58 -04:00
David Kopf 09db159876 128rfa1 cca fix, NETSTACK_RADIO.off now returns 0/1 if radio off/on 2011-08-18 14:36:04 -04:00
David Kopf 53737d9a38 Use correct prescale factor 2011-08-18 13:58:20 -04:00
David Kopf 3ea102050b Apply patch of Ivan Delamer for atmega1281 @ 4 MHz 2011-08-17 13:16:46 -04:00
David Kopf 36fa735323 Calculate best prescaler based on F_CPU and CLOCK_CONF_SECONDS. Inspired by patch from Ivan Delamer. 2011-08-17 13:15:26 -04:00
maniacbug 0990896f54 Added an .eu target to upload only the eeprom for AVR cpu. 2011-08-16 14:10:48 -04:00
maniacbug 8f0bb86c02 No strict aliasing for AVR
AVR build generates numerous aliasing errors.  This -f switch silences them.
2011-08-16 14:07:06 -04:00
David Kopf 577215deca Use 128rfa1 interrupts instead of timing.
Generalize DEBUGFLOW macro for use in multiple routines.
2011-08-15 15:06:38 -04:00
David Kopf 50d1086553 Add changes needed for contikimac 2011-08-13 11:38:38 -04:00
David Kopf 03ab525652 Option for nested rtimer interrupts 2011-08-13 11:35:03 -04:00
David Kopf cdcb2c4744 CCA measurement was always returning busy 2011-08-06 13:48:52 -04:00
David Kopf b70d2b3163 Remove duplicate code block 2011-08-05 17:34:38 -04:00
David Kopf c9b19ce655 Change timer setups for arbitrary CLOCK_CONF_SECOND
Change raven to 128 ticks and enable 32KHz crystal as default.
2011-08-05 15:14:35 -04:00
David Kopf e2ad2acde4 Add stk500 platform and changes suggested by Daniel Willmann 2011-08-03 11:18:55 -04:00
David Kopf 6ec85fe079 Add Iris port of Shinta Hatatani 2011-08-03 10:17:59 -04:00
Mariano Alvira 2b9f4e8fed Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x 2011-08-01 19:50:46 -04:00
David Kopf cf3241c5db Add file needed for rpl border router 2011-07-24 12:07:39 -04:00
David Kopf 0bb585fd60 Replace WEBSERVER by AVR_WEBSERVER 2011-07-24 11:43:17 -04:00
Simon Berg 506eced1bc Bug fix by Jonathan Chung 2011-07-22 15:07:52 +02:00
Mariano Alvira 485d6716e0 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x
Conflicts:
	cpu/mc1322x/src/default_lowlevel.c
2011-07-18 07:25:19 -04:00
HATATANI Shinta f4740a062a IRIS port is working with uIPv6 2011-07-15 16:36:25 +09:00
Mariano Alvira 758fc37307 mc1322x: flush the rx fifos when full 2011-07-12 07:05:04 -04:00
Mariano Alvira 4cf9514aa9 fix gpio initialization for uart2 2011-07-09 14:33:03 -04:00
Mariano Alvira 6d96721ac4 mc1322x: block in uart putc if the TX buffer is full. Can also be
configured to drop chars instead with UARTx_DROP_CHARS
2011-07-09 12:46:30 -04:00
Mariano Alvira e80f9eb4b5 mc1322x: build fixes for uart2 2011-07-08 19:40:42 -04:00
Mariano Alvira e2d74fa0a5 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into uart-upstream
Conflicts:
	cpu/mc1322x/lib/include/uart.h
	cpu/mc1322x/src/default_lowlevel.c
2011-07-08 19:21:15 -04:00
David Kopf 6ea7250af7 Change ctimer startup order, add multihop to wpcap and minimal-net platform. 2011-06-30 12:12:07 -04:00
David Kopf c48b7ab78d Add RPL nodes and border router to minimal-net platform (cygwin only) 2011-06-28 08:19:48 -04:00
David Kopf 6b434a553f Implement SRAM routine of Georg von Zengen 2011-06-21 13:03:58 -04:00
Joakim Eriksson af601dfb23 improved support for IAR compiler for z1 2011-06-05 00:21:47 +02:00
Mariano Alvira 33b32c61e9 Only insert an ack packet if the ack request bit is set 2011-06-01 13:47:05 -04:00
Joakim Eriksson 77ec0bfa0f fixed the z1 platform and generic code used by z1 to work with IAR compiler 2011-05-25 17:21:51 +02:00
Mariano Alvira 724bcbd2d3 Merge remote branch 'libmc1322x/master'
Conflicts:
	cpu/mc1322x/src/default_lowlevel.c
2011-05-14 21:19:47 -04:00
Joakim Eriksson fd75050c67 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-05-13 11:53:45 +02:00
Joakim Eriksson 2c16538e6a fixed support for IAR compiler 2011-05-13 11:52:42 +02:00
Salvatore Pitrulli 7a48110067 STM32W flasher utilities for Linux and Windows merged into a single folder. 2011-05-10 19:26:33 +02:00
Mariano Alvira 0a2b86456b add option to insert an ack packet on autoack 2011-05-08 09:50:57 -04:00
Mariano Alvira 65671c66c6 turn on insert ack packet by default 2011-05-08 09:50:57 -04:00
Joakim Eriksson 3fa8da5ddf fixed IAR compilation paths 2011-05-02 15:19:28 +02:00
Salvatore Pitrulli 5eabf33211 Added functions for deep sleep to mbxxx platform. 2011-04-27 18:12:23 +02:00
Mariano Alvira d80449244d Merge remote branch 'libmc1322x/master' 2011-04-20 21:23:47 -04:00
Salvatore Pitrulli 01a7a78a94 Fixed temperature ADC conversion bug on mbxxx.
The conversion was made from an incorrect source when
the GPIO pin was not PB7.
Added functions and macros used to select the correct
ADC channel.
2011-04-20 18:06:20 +02:00
Salvatore Pitrulli aa968309af Merge remote branch 'sf/master' 2011-04-16 16:27:10 +02:00
Niclas Finne 813489633c Added missing include 2011-04-15 15:49:43 +02:00
Salvatore Pitrulli 4ff82b76e5 Removed -fsigned-char GCC compiler options. 2011-04-14 08:12:11 +02:00
Salvatore Pitrulli 0105057c44 Removed unwanted file. 2011-04-14 08:10:58 +02:00
Salvatore Pitrulli 0a0ad39c9b Added weak symbols for STM32W exception handlers and other minor updates for the HAL. 2011-04-14 08:06:13 +02:00
Salvatore Pitrulli 57163c616d Removed some warnings. 2011-04-14 08:05:21 +02:00
Salvatore Pitrulli af8e58e063 Set LED pins to output when MB851 is in sleep mode.
This reduces power consumption.
2011-04-13 18:14:12 +02:00
dak664 2e14df3981 Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6. 2011-04-08 15:15:16 -04:00
Salvatore Pitrulli 6655c876f2 Added functions and example for deep sleep on mb851.
The added function let a process to make the system go
into deep sleep for maximum power saving.
The udp-ipv6-example shows how to use these new functions.
2011-04-08 11:53:48 +00:00
dak664 89741bd322 Exit on watchdog reboot call 2011-04-07 17:47:54 -04:00
dak664 581d081ffe Don't use RF230_CONF_CCA_THRES if it is not defined. 2011-04-07 17:44:10 -04:00
Joakim Eriksson f603c965c1 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-04-06 20:15:44 +02:00
Joakim Eriksson 928bf6b6c1 fixed cpu/msp430 for compilation with IAR compiler 2011-04-06 20:08:48 +02:00
Mariano Alvira 4f4e06c71b Merge remote branch 'libmc1322x/master' 2011-04-06 05:56:06 -04:00
Oliver Schmidt 5da4faf71e Allow VC++ to be used as alternative to GCC for building in the WIN32 target.
TODOs:
- Update README
- Add dependency handling
- Add rtimersupport
2011-04-03 22:32:11 +02:00
Oliver Schmidt f83fb3704b Replaced make-empty-symbols with empty-symbols.[c|h]
The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.
2011-04-03 13:24:58 +02:00
dak664 a9cbbb4570 Add sneezer mode and tx power change 2011-03-23 18:08:07 -04:00
Mariano Alvira 11f5bca7c4 Merge remote branch 'libmc1322x/master'
Conflicts:
	cpu/mc1322x/board/redbee-econotag.h
2011-03-22 16:28:08 -04:00
Salvatore Pitrulli eb588f1aec New HAL and SimpleMAC for STM32W108. 2011-03-22 19:35:49 +01:00
dak664 5dd7500d0b Add configurable auto cca threshold and implement driver cca call.
Show smallest rssi in jackdaw menu.
2011-03-21 11:10:30 -04:00
dak664 d9b5bac953 Refactor with WATCHDOG_CONF_TIMEOUT 2011-03-14 16:14:47 -04:00
Mariano Alvira 74517b9df4 Merge remote branch 'libmc1322x/master' 2011-03-13 17:14:32 -04:00
dak664 59109b9893 Fix type, diagnostic interrupt code on conditional 2011-03-13 14:08:02 -04:00
dak664 a210e14d78 Add defines for watchdog configuration. 2011-03-13 13:45:12 -04:00
dak664 0b2d3d1615 Refactor clock code with optional interrupt optimizing.
Put periodic radio calibration on conditional.
2011-03-13 13:07:32 -04:00
dak664 0573ecd62f Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-03-11 16:51:10 -05:00
dak664 bf5be5056f Testing $OS works with cygwin and DOS command windows 2011-03-11 16:50:35 -05:00
Mariano Alvira f2b92cfa98 mc1322x: remove bad rule from cpu Makfile 2011-03-11 16:32:25 -05:00
Mariano Alvira 59d7fad746 Merge remote branch 'libmc1322x/master' 2011-03-11 16:28:14 -05:00
dak664 6a5c8ff1c4 Include file needed for slip rpl-border-router build 2011-03-11 14:10:30 -05:00
Mariano Alvira a1ae79307b mc1322x: remove auto reception mode as it appears to be the cause of
the periodic autoack checksum errors. removing auto mode doesn't seem
to create any performance issue.
2011-03-11 06:28:47 -05:00
dak664 bb574fd1e2 Don't create an object directory if target does not exist 2011-03-10 14:59:21 -05:00
Mariano Alvira 5208aa14ea mc1322x: remove auto reception mode as it appears to be the cause of
the periodic autoack checksum errors. removing auto mode doesn't seem
to create any performance issue.
2011-03-08 15:36:53 -05:00
dak664 de7bcda99f avrdude and makefile changes suggested by Georg von Zengen 2011-03-08 13:07:00 -05:00
Mariano Alvira fa08b09770 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into update-lib 2011-03-07 12:37:26 -05:00
Mariano Alvira 2c79ab4962 mc1322x: increase the heap to 4K 2011-03-05 16:52:35 -05:00
Mariano Alvira befbd4a479 mc1322x: handle board file differently if cygwin 2011-03-04 16:54:59 -05:00
Fredrik Osterlind dd7cec737d removed obsolete leds_[color]() functions, replaced by leds_{on,off}()
allow LEDS_[COLOR] to be configured by platform-conf
2011-03-03 17:48:32 +01:00
Mariano Alvira f0c27340c6 mc1322x: increase the HEAP to 2048 bytes: needed for COAP server. 2011-02-25 16:10:08 -05:00
Mariano Alvira bea643bc4a mc1322x: flush the radio rx queue in the receive process 2011-02-23 15:19:45 -08:00
Mariano Alvira c12ab0d484 mc1322x: get the tx status for a packet and return the proper response. 2011-02-23 15:19:44 -08:00
Mariano Alvira 535b9d35d7 mc1322x: disable broken maca calls for now.
maca_on, maca_off, and contiki_maca_init don't work correctly;
they mess up address filtering.

disable them for now and fix them later.
2011-02-23 15:19:44 -08:00
dak664 46297de770 Allocate variable only when mass storage is enabled 2011-02-23 14:06:06 -05:00
Mariano Alvira c857e57d2f msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h 2011-02-21 09:23:52 -08:00
Mariano Alvira 8f9cf50e55 set timestamp packet attribute 2011-02-18 12:46:34 -05:00
Mariano Alvira a86a0fbe0e set lqi packet attribute 2011-02-18 12:46:10 -05:00
Mariano Alvira 07f77b02eb Merge remote branch 'libmc1322x/master' 2011-02-18 12:38:30 -05:00
Mariano Alvira 2e331b51e8 Merge remote branch 'libmc1322x/master' into update-libmc1322x
Conflicts:
	cpu/mc1322x/COPYING
2011-02-17 14:41:47 -05:00
Mariano Alvira 2e33e1694a Merge branch 'libmc13-9f82e068' into update-libmc1322x 2011-02-17 14:39:20 -05:00
Mariano Alvira 7cdfbb0947 remove cvs keywords from cpu/mc1322x 2011-02-17 14:36:55 -05:00
Mariano Alvira bfb471c782 add proper arm flags and remove Makefile.src as it's not used. 2011-02-08 09:55:50 -05:00
Mariano Alvira b1dd3fc063 use the CS toolchain by default:
http://www.codesourcery.com/sgpp/lite/arm/portal/release642
2011-02-08 09:55:23 -05:00
Mariano Alvira 81552d1f6d add a tutorial for rest-example 2011-02-08 09:08:05 -05:00
Mariano Alvira 5c3ef556d9 add a dummy io.h for mc13224v 2011-02-08 09:07:54 -05:00
Mariano Alvira f5ba70cd20 add heap and _sbrk to mc13224v 2011-02-08 09:07:23 -05:00
Mariano Alvira 9572baa71b fix mc13224v led driver to only touch gpio used for leds. 2011-02-08 09:07:11 -05:00
dak664 5c098993df Add initial file 2011-02-07 20:30:47 -05:00
dak664 b41e8f384e Add initial atmega128rfa1 file 2011-02-07 20:28:17 -05:00
dak664 f1f32c8e6a Add combined MCU and radio ATmega128rfa1 2011-02-07 13:46:34 -05:00
Mariano Alvira 2a75a4a5df this fixes a major problem with the maca_process
Before it didn't do process_poll like it should and would add events
out of turn and mess up the event processor --- that would cause the
button to stop working after the unhandled events exceeded a max
number

this fixes maca_process to do a process_poll as it should. now the
button works fine and so does the radio.
2011-02-03 18:09:51 -05:00
oliverschmidt 8c87f85a1d Made cc65 build compatible with make.exe from GnuWin32 and cmd.exe. We just live without the phony targets when building with cmd.exe - the next cc65 release will make the whole sed thingy obsolete anyway :-) 2011-01-23 16:30:30 +00:00
joxe 801a7e1149 fixed bug with uart DMA 2011-01-19 20:44:20 +00:00
salvopitru 5fcae86be3 Now it is putchar that has to be redefined (instead of __io_putchar), like other platforms. 2011-01-19 09:13:06 +00:00
adamdunkels 8f283b3989 Bugfix 2011-01-19 07:30:31 +00:00
adamdunkels 6f076dbe1a A set of compiler options that reduce the size of the final code size and RAM usage with ~10%. Courtesy of Simon Duquennoy. 2011-01-19 07:24:37 +00:00
maralvira 68180c0574 use network 230 --- 802.15.4 no-FCS 2011-01-18 16:58:18 +00:00
adamdunkels bb2e3b25bd Larger default DMA tx buffer size, to allow SLIP operation. Warn if DMA is enabled, since MSPsim does not yet support it. 2011-01-18 16:07:16 +00:00
maralvira ce92a90e58 new timer setup routines. 2011-01-17 15:51:19 +00:00
maralvira b3c8c14b7d add timer setup routines 2011-01-17 15:51:02 +00:00
maralvira ca098db611 fix a race condition regarding advancement of the softclock. Without
this, the advancment would fail to trigger a tx cycle
occasionally. This would cause the packet to get deferred until the
next expiration of the softclock.
2011-01-17 15:49:17 +00:00
maralvira 40bb4b80dc whitespace fixup to sync with libmc1322x 2011-01-17 15:48:39 +00:00
maralvira 6fb75263f9 fix parsing and pcap generation for packets with multiple output lines
(those that are > 16 bytes).
2011-01-17 15:47:23 +00:00
maralvira d82b004154 fix parsing and pcap generation for packets with multiple output lines
(those that are > 16 bytes).
2011-01-17 15:47:08 +00:00
maralvira d0227afbed cycle channel on keypress. 2011-01-17 15:46:27 +00:00
maralvira c78e1e345e add stdint.h 2011-01-17 15:45:02 +00:00
maralvira 0445a4f78f add cmdline options to set the intercharacter delays. 2011-01-17 15:44:18 +00:00
maralvira fb8c08ca7c only use these stubs with linux toolchains 2011-01-17 15:42:24 +00:00
salvopitru 9aa734936f RANDOM_MAX changed to RANDOM_RAND_MAX. 2011-01-17 10:08:14 +00:00
salvopitru fb75503624 'BTM' can be defined to flash devices already in bootloader mode.
COFFEE_FILES changed to COFFEE.
2011-01-17 09:41:47 +00:00
salvopitru a9b1b37bec Added definition of BAUD2UBR macro. 2011-01-17 09:22:24 +00:00
adamdunkels f002563e60 Tx on interrupts occasionally misses characters on output. Therefore we turn it off by default. 2011-01-09 20:44:14 +00:00
ksb eb24078ffb Converted CRLF line endings to LF 2011-01-05 17:16:42 +00:00
joxe 5b7b3da99c minor fixes of DMA uart code 2011-01-05 13:36:38 +00:00
joxe 565fda47aa added initial uart1 DMA rx support and required LPM requirements api 2011-01-05 12:02:01 +00:00
dak664 90a6d768ea Keep track of sleeptime and display on status web page. 2010-12-23 19:41:07 +00:00
dak664 662b0e064c Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes. 2010-12-22 22:49:16 +00:00
dak664 95982b40ba $make will show avr-size once and only once whether or not a build needs to occur. 2010-12-22 21:13:09 +00:00
dak664 5b8e62ef4f Patches from R Larsson 2010-12-22 20:10:00 +00:00
dak664 013c3ac2f8 Remove contitional on clock updating, it should always be done after a sleep! 2010-12-22 17:09:03 +00:00
dak664 44a2e34005 Resolve TIMER2 conflict between sleep and possible clock usage. 2010-12-22 16:50:30 +00:00
dak664 e3e1e04948 Add FCS comments and text2pcap dump routines of Roger Larsson.
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664 e4b0b3dc8c Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will. 2010-12-18 20:51:11 +00:00
dak664 5623ad827b Enable radio off and sleep modes. 2010-12-18 20:49:00 +00:00
adamdunkels f370b217a5 Turned up the rtimer resolution to 32678 Hz. 2010-12-16 22:50:21 +00:00
adamdunkels 1d090ea0f5 Made configuration of CC2420 SFD timestamps easier 2010-12-16 22:49:33 +00:00
adamdunkels c0fedd7661 Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module 2010-12-16 22:49:12 +00:00
dak664 570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664 aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
salvopitru d0db3fc39a Added a check for Coffee start address. 2010-12-15 15:01:00 +00:00
dak664 1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
salvopitru 5fe80dd99d Added elfloader machine dependent code for STM32W. 2010-12-15 11:10:20 +00:00
dak664 c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664 9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664 35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664 58b7a19803 Hardware/software radio HAL patch from Roger Larsson.
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664 21b10e8021 Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schfer 2010-12-03 18:16:56 +00:00
dak664 0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions.
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
nifi 7110afdad5 added missing include 2010-11-27 15:27:20 +00:00
dak664 dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
adamdunkels 149f4e8d21 Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers 2010-11-25 09:22:56 +00:00
dak664 880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
adamdunkels 4fac3037e0 Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash. 2010-11-15 21:52:54 +00:00
dak664 69ef9d57eb sizeof(*) is sizeof first array element 2010-11-12 17:24:36 +00:00
dak664 9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
nifi 5de83c9085 Only include code for stack printouts when needed 2010-11-12 15:54:41 +00:00
maralvira 3426eae031 fix typos 2010-11-11 20:37:33 +00:00
maralvira 9b2a2bb5e6 fix up stdint include 2010-11-10 22:12:29 +00:00
maralvira 6da84819dd use stdint.h instead of custom types.h
stdint.h is more portable across compilers
2010-11-10 22:06:28 +00:00
maralvira e229022f38 include crm.h 2010-11-10 21:58:12 +00:00
salvopitru 28e1445a0f Added a simple implementation of Coffee for STM32W108. 2010-11-10 11:20:44 +00:00
maralvira dfbc81158b Allow CROSS to be overridden with CROSS or CROSS_COMPILE 2010-11-09 13:13:45 +00:00
maralvira 1aac14f252 add tutorial explaining how to set up an RPL network of econotags 2010-11-09 01:30:01 +00:00
maralvira 3b515587c5 change how prepare and transmit work --- Contiki expects to call
prepare once and then transmit many times to repeat the same packet
over and over. This didn't work like that, but now it does.
2010-11-07 20:07:42 +00:00
maralvira e029fa8da0 fix defines for raw mode 2010-11-07 18:34:52 +00:00
maralvira 4664151419 fix build errors with start.S 2010-11-07 15:19:45 +00:00
maralvira 29333232d5 add section .start and undef _start so that _start is placed by the
linker correctly
2010-11-07 14:57:53 +00:00
maralvira b8ebce0fef add a memory section for RAM so that the linker will warn when you've
made your program too big.
2010-11-07 14:54:05 +00:00
maralvira 8385536c41 fix how start object is linked 2010-11-07 14:52:23 +00:00
maralvira f38598ce9f clear BSS 2010-11-07 14:49:42 +00:00
maralvira 57513948c9 Move stack near BSS so it doesn't take up space in the .bin 2010-11-07 14:48:52 +00:00
maralvira 77cf0f0f5e update ring_osc_on and _off to the new bit structs 2010-11-07 14:42:31 +00:00
maralvira c8056cc4e2 define TCF TCF1 and TCF2 --- the new bit structs don't work here for
some reason.
2010-11-07 14:42:02 +00:00
maralvira dab7faf13c Add gpio_set and gpio_reset
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
2010-11-07 14:29:04 +00:00
maralvira 4a4a39c84a Name the GPIO structure so we can set multiple bits at once 2010-11-07 14:28:30 +00:00
maralvira 4217eb2ebc Provide a function to change timer interrrupt handlers
Function irq_register_timer_handler(int timer, void (*isr)(void))
lets you change the handler at runtime.  This lets us set handlers
without necessarily knowing the name at link-time.  The old way of
having weakly-linked tmr0_isr functions should still work.
2010-11-07 14:27:01 +00:00
maralvira 65d3942c76 Add the disable_int({}) macro
This is similar to safe_irq_enable and disable
2010-11-07 14:26:24 +00:00
maralvira 83e6995af1 Add TMR_ADDR helper 2010-11-07 14:25:07 +00:00
maralvira d930ce0e2b Add some useful timer macros 2010-11-07 14:24:36 +00:00
maralvira 5e00219a9c Register definitions: get rid of some macro magic that doesn't help much
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
2010-11-07 14:24:11 +00:00
maralvira 091e4cd84e Add structure-based ITC access 2010-11-07 14:23:15 +00:00
maralvira 11ac20a361 REF_OSC is a 32-bit number, not 64-bit number 2010-11-07 14:22:51 +00:00
maralvira 745e7b5ac2 Add cal_isr() support 2010-11-07 14:21:59 +00:00
maralvira ab84453401 Add structure-based CRM definitions 2010-11-07 14:21:33 +00:00
maralvira 9d072d5309 Add macro to help compute TMR.ENBL values (useful when using #defined
values to represent timers)
2010-11-07 14:21:06 +00:00
maralvira 85e6b06175 Add pin definitions for each timer, they're fixed 2010-11-07 14:19:17 +00:00
maralvira 8d2f740f7f Fix #ifdefs in board files 2010-11-07 14:18:54 +00:00
maralvira 3726588f02 Add structure-based GPIO register definitions 2010-11-07 14:17:45 +00:00
maralvira 20b477db13 Add structure-based timer register definitions 2010-11-07 14:17:20 +00:00
maralvira c71a0243ff Add missing type for TMR0_COMP2 2010-11-07 14:16:28 +00:00
maralvira 62a45c7ba2 Add script to invoke kermit with a particular port and speed 2010-11-07 14:15:40 +00:00
maralvira 2ac88222f6 Use "rm -f" in clean rules to ignore errors 2010-11-07 14:14:47 +00:00
maralvira 2e87143381 use kermit in open-terms 2010-11-07 14:13:22 +00:00
maralvira c8be3047c3 fix byte ordering in burn-macs 2010-11-07 14:12:55 +00:00
maralvira 0450b3fd90 add script that burns the mac address only --- mac address is Redwire
IAB + tty number.
2010-11-07 14:12:27 +00:00
maralvira f913cf728b modify flasher.c to not create a vaild boot magic number if the length
of the file is zero

modify mc1322x-load.pl to optionally send a zero length file with -z;
extra data on the command line is still written.

This allows you to burn the mac adress without flashing a vaild image.
2010-11-07 14:11:50 +00:00
maralvira 9f7d860e9c add scripts to help load a bunch of econotags 2010-11-07 14:11:18 +00:00
maralvira 8b2ef2675d discard received packets --- this lets you run multiple rftest-tx's at
the same time.
2010-11-07 14:10:16 +00:00
maralvira e00349509d add simple install rule 2010-11-07 14:09:43 +00:00
maralvira ee943c062d add autoreset command and do_exit option 2010-11-07 14:08:50 +00:00
maralvira e886e83908 fix bug in print_packet
Thanks dean and jim.
2010-11-07 14:07:33 +00:00
maralvira f1fede7090 get LQI of received packets 2010-11-07 14:06:57 +00:00
maralvira ae0b7f846f Fix the CNTR defines.
Thanks to Ruslan for finding this.
2010-11-07 14:04:59 +00:00
maralvira 646a37f8b3 use the hardware random number generator 2010-11-07 13:52:12 +00:00
dak664 eb0d5c7f45 Add missing includes 2010-11-03 16:55:40 +00:00
oliverschmidt 1dfe490f9b Use some defined event constant instead of just 0. 2010-10-31 22:51:17 +00:00
dak664 9194b3ac69 Fix error when RS232 not enabled 2010-10-28 19:31:28 +00:00
dak664 ad6712736b Fix Windows XP RNDIS+CDC serial port enumeration 2010-10-28 19:30:14 +00:00
dak664 258e3cc93a Allow simultaneous use of RS232 and USB serial ports 2010-10-27 14:51:20 +00:00
salvopitru d8711d32a3 Added configuration in order to run Rime. 2010-10-27 14:05:23 +00:00
salvopitru db3f1864a0 Increased minimum stack size, because rpl uses it much more. 2010-10-26 11:07:20 +00:00
salvopitru 33ccbbb509 Fixed compile error raised after rand.c removal. 2010-10-26 10:47:23 +00:00
salvopitru 444a00949a Added missing libraries. 2010-10-26 10:24:17 +00:00
salvopitru 790f13a689 More safe detection of cygwin path. 2010-10-26 07:26:40 +00:00
salvopitru ec5e3ce0d7 New Contiki port to STM32W108. 2010-10-25 09:03:38 +00:00
adamdunkels 34f6a60a4a By default, don't print stack on reboot, since there are cases where this may hang the CPU (when the CPU is in LPM when the watchdog triggers). Must fix the code to set the UART and CU into correct modes before enabling stack printout on reboot. 2010-10-24 21:10:25 +00:00
oliverschmidt 9a8c62a629 Removed remark on using cc65 snapshot. 2010-10-23 19:42:53 +00:00
dak664 123e3cae41 Fix compiler warnings 2010-10-23 15:26:46 +00:00
oliverschmidt 5e10cf2eed Implemented cfs_opendir() and friends for CBMs based on cc65's cbm_opendir() and friends. 2010-10-23 13:48:06 +00:00
oliverschmidt 9e9eb4b55c There's no point in pulling in cfs-posix-dir.c if the POSIX functions it depends on are dummies anyway. 2010-10-23 08:17:45 +00:00
oliverschmidt b84f771c6b The recent change in core/net/mac/lpp.c requires CLOCK_SECOND to be at least twice NETSTACK_RDC_CHANNEL_CHECK_RATE in order to compile. 2010-10-22 20:28:58 +00:00
dak664 7be7a34bbb Fix windows COM port enumeration 2010-10-22 19:15:43 +00:00
dak664 774474b7aa Fix compiler warning 2010-10-20 18:57:33 +00:00
oliverschmidt 842c6a018a The recent global change regarding htons allowed to remove this hack :-) 2010-10-19 20:30:47 +00:00
adamdunkels 5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
oliverschmidt 35f7b6046e Fixed 'Modulo operation with zero' error by making sure that NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE is not smaller than CLOCK_CONF_SECOND. 2010-10-06 19:48:26 +00:00
oliverschmidt a40594b7ce Display correct name of statically loaded driver. 2010-09-29 21:48:54 +00:00
oliverschmidt c839eacbdf Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/. 2010-09-29 19:44:01 +00:00
oliverschmidt 55d61d317b Allow cc65 ethernet drivers to be loaded statically instead of dynamically. This saved quite some space in scenarios without additional cc65 drivers to be loaded for i.e. a mouse because in those scenarios the cc65 module loader isn't necessary. And without the module loader typically the cc65 heap manager isn't necessary. 2010-09-28 23:02:16 +00:00
adamdunkels 7c14899eeb Made stack printout on reboot configurable.
Added the ability to turn on watchdog multiple times - the watchdog
registers are touched only when the watchdog goes from off to on state
to avoid retriggering the watchdog when it shouldn't.
2010-09-22 22:12:37 +00:00
dak664 110bc0242e Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum 2010-09-17 21:59:09 +00:00
nifi f5ea831445 Added function rtimer_arch_now that makes sure that the timer value does not change between readouts to avoid reading while the timer is being updated. 2010-09-13 20:51:09 +00:00
maralvira 1cb0762bd0 Don't post from an interrupt context --- this resulted in process
corruption if a packet was received at the wrong time.

The maca_thread now just PAUSEs and checks rx_head instead of waiting
for a data event to be posted.
2010-09-13 14:15:58 +00:00
joxe c0549cad3d added some files for MSP430X I/O 2010-08-24 16:23:20 +00:00
maralvira df9d43ab83 increase the reception time now that tx_packet will advance the timer
as necessary.
2010-07-28 18:49:34 +00:00
maralvira 9a7a2742b3 remove bad call to maca_on()
maca_on() resets the maca and phy, takes a long time, and clobbers any
packet that is currently being transmitted or received. It doesn't
belong in prepare and was the source of a lot of latency and bad
packet transmissions.

Make sure the maca is on somewhere else.
2010-07-28 18:48:51 +00:00
maralvira a3b9c2adb0 in tx_packet, force an interrupt if the maca isn't doing anything so
that the transmit starts. Or if the maca is in a reception cycle,
advance the softclock timeout to now so that transmission starts as
soon as possible (immediately if a packet isn't being received or
right after reception finishes).
2010-07-28 18:48:03 +00:00
maralvira 593a50c38f make the debug prints in check_maca more specific 2010-07-28 18:47:35 +00:00
maralvira 422d05003f use 32 packets in the pool by default 2010-07-28 18:47:05 +00:00
maralvira eb0e3b7989 fix long standing bug where the last pages of NVM were not erased
properly.
2010-07-28 18:43:04 +00:00
oliverschmidt c602c61468 Activated Platform-specific File System (PFS) for the C64/C128 by default for all programs with R/W CFS access. 2010-07-22 10:30:12 +00:00
oliverschmidt 9c0f5d857c Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t. 2010-07-21 22:35:59 +00:00
maralvira 5b44d6a29a properly drop characters when buffer is full
fix by David Kopf
2010-07-06 13:39:34 +00:00
joxe 0c5390339f updated to new cc2420 spi naming 2010-06-23 10:44:41 +00:00
joxe 705f8cc451 fixed naming of SPI and CC2420 related code 2010-06-23 10:19:15 +00:00
dak664 898c00b812 Remove usually extra avr-size command 2010-06-22 17:11:38 +00:00
dak664 e45b1c042b TIMER2 uses TIMER2 interrupt vector! 2010-06-22 16:17:24 +00:00
dak664 ab7f3bd8e3 Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen. 2010-06-18 17:30:30 +00:00
dak664 cb45883970 Turn on DEBUGFLOW and software CRC computation 2010-06-18 15:44:53 +00:00
nifi 20c8b4f9c6 removed obsolete comments 2010-06-15 13:30:42 +00:00
adamdunkels 3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
maralvira 419906a769 initial mc1322x commit
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-10 14:55:39 +00:00
maralvira 285f508cc9 initial commit of src files 2010-06-10 14:49:31 +00:00
maralvira bf9f960bbe add board files. 2010-06-10 14:48:32 +00:00
maralvira 1145fa9ba9 initial mc1322x commit
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-09 14:43:22 +00:00
oliverschmidt d28865abac Adjusted hacky inline assembler to reference uip_aligned_buf instead of uip_buf - some day I'll need to clean up that (btw bogus) code. 2010-05-30 10:12:30 +00:00
oliverschmidt 126ea40994 Removed UIP_CONF_PLAIN_BUFFER again now that the pointer indirection to uip_buf was removed again. 2010-05-30 09:46:12 +00:00
nifi 808116ff56 Made SFD timestamps configurable via external definition 2010-05-10 11:32:44 +00:00
oliverschmidt 2169932727 Have the cc65 based targets stay with the "old" plain uip_buf. 2010-05-08 07:25:10 +00:00
dak664 972e2f5d4f Add MCU to avr-size command; Remove fuse and signature from .hex; Give bootloader more memory 2010-05-04 14:14:49 +00:00
nifi 9638789d9d Added rule to use MSPSim to show the maptable from the last compilation on MSP430 targets 2010-04-20 15:38:09 +00:00
oliverschmidt 7b5bde6336 Made the maximum number of concurrent TCP connections a highlevel config value. 2010-04-11 20:47:16 +00:00
anthony-a 04fb6e5b42 initial add. 2010-04-10 21:18:32 +00:00
anthony-a 3de90a9671 fix adc compile errors when HAVE_DMA is not true.
remove reference to brione_lcd.h
turn off DEBUG messages.
2010-04-10 19:59:37 +00:00
oliverschmidt 21f8e4e982 Made MAC_CONF_CHANNEL_CHECK_RATE identical to CLOCK_CONF_SECOND in order to make sure it isn't larger - which causes 'divide by zero' errors. 2010-04-05 15:17:22 +00:00
oliverschmidt 9831f02eba Replaced dummy code with code taken from 'native'. 2010-04-05 15:13:50 +00:00
oliverschmidt ffce456612 If rtimer_arch_now() is mapped to clock_time() it seems reasonable to map RTIMER_ARCH_SECOND to CLOCK_CONF_SECOND for consistency reasons. 2010-04-05 15:10:06 +00:00
oliverschmidt 26e61ac3f7 Programs using CFS should #include "cfs.h" ;-) 2010-04-05 13:41:29 +00:00
adamdunkels 5eb22ad289 Print out stack pointer when rebooting node 2010-04-04 12:30:10 +00:00
adamdunkels 0ed236e774 Bugfix: the clock interrupt now flushes the energy estimator to avoid overflow of the LPM mode 2010-04-04 12:29:50 +00:00
adamdunkels 52ad0008dc Bugfix 2010-03-31 11:55:04 +00:00
adamdunkels 4447782ab4 Print out a stack trace when a node reboots because of the watchdog 2010-03-30 23:02:23 +00:00
adamdunkels ac172a5575 Turn off LPM mode for clock interrupts to avoid rtimer wrapping during extended LPM 2010-03-29 21:53:32 +00:00
oliverschmidt 54e19782ae Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations. 2010-03-27 15:16:57 +00:00
oliverschmidt 6769e6a99f - Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations.
- Completed declarations.
2010-03-27 14:46:08 +00:00
nifi ebfa6c5ef1 only include memcpy/set workaround when needed 2010-03-21 10:40:15 +00:00
joxe e99c906caf activated the new workaround... 2010-03-19 14:50:07 +00:00
joxe 7e6919cc8c fixed workaround for memcpy/set to be memory efficient but slower 2010-03-19 14:39:45 +00:00
adamdunkels 04cdae05c3 Increased the rtimer granularity: needed to make contikimac work 2010-03-19 13:25:52 +00:00
dak664 0265f09a5c Add RS232 port option to jackdaw USB stick 2010-03-15 18:52:55 +00:00
fros4943 db777ce3d0 reverted previous patch: appears to create problems on hardware 2010-03-05 12:06:03 +00:00
nvt-se 7543d53603 Ensure that the UART port is available before writing 2010-03-03 23:18:58 +00:00
dak664 01a3912864 Define and use radio STATE_TRANSITION, improve debug messaging 2010-03-02 16:29:59 +00:00
dak664 39e6f6a830 Clean up, functional webserver for further testing of low power protocols 2010-02-28 21:29:19 +00:00
dak664 d61676b8f7 Add RADIOALWAYSON to monitor packet losses with low power protocols 2010-02-28 21:19:33 +00:00
dak664 5debc183a9 Enable radio stats in sensor cgi as default 2010-02-26 21:38:57 +00:00
dak664 844b3a34f7 Platform 0 was matching by default 2010-02-26 21:15:28 +00:00
dak664 195f5939c4 Clean up after testing 2010-02-26 20:51:48 +00:00
adamdunkels 465125c5e7 Added support for 32-bit clock ticks: when reading the 32-bit value, make sure that it does not change between readouts to avoid reading right in the middle of it being updated 2010-02-23 18:41:20 +00:00
dak664 7274f1d1ed Report operating channel with either radio driver 2010-02-23 17:40:09 +00:00
dak664 4ded42db1e Add sniffer and 802 frame reporting 2010-02-23 17:37:51 +00:00
dak664 b4bc7fc3da Make RF230BB the default radio driver 2010-02-23 02:01:46 +00:00
dak664 cbb8621e30 update to new driver format 2010-02-22 22:23:18 +00:00
dak664 658c35df11 remove debug printf 2010-02-22 22:21:15 +00:00
adamdunkels 953a8c2015 Turn off timer before updating - needed to avoid bugs in ContikiMAC - not 100% sure why 2010-02-18 22:15:54 +00:00
oliverschmidt 1817acae15 Now that the C64 mouse driver works we can activate the mouse support for this target :-) 2010-02-18 21:30:31 +00:00
dak664 a83381de30 add rtimers for cxmac 2010-02-18 17:21:44 +00:00
dak664 fee5efb141 additions for cxmac 2010-02-18 17:20:50 +00:00
dak664 98b69e1bff No sniffer yet for RF230BB 2010-02-16 22:55:20 +00:00
dak664 23f6949af6 RF230BB addition 2010-02-16 22:51:40 +00:00
dak664 b0930cf2ec Move rtimer-arch.c inclusion from platform to cpu 2010-02-16 21:56:15 +00:00
dak664 0f59ba3187 Add rtimers, allow Jackdaw to use RF230BB driver 2010-02-16 21:48:38 +00:00
dak664 893a31f49b Jackdaw additions 2010-02-16 21:41:24 +00:00
dak664 8603f0f0f6 Add RADIOSTATS 2010-02-12 18:00:30 +00:00
dak664 a6ab27402a Add RADIOSTATS 2010-02-12 16:41:02 +00:00
dak664 eb2ac1a154 Make seconds a global variable, add optional radio on time 2010-02-12 14:37:50 +00:00
ksb 8e7ada96d3 Use .u prefix for uploading to device and PROG variable to select programmer 2010-02-10 10:08:36 +00:00
oliverschmidt 50be40768b Removed closing of stdin, stdout (and stderr on the Apple2). It was introduced in order to maximize the number of available file handles for the webserver. However none of the target machine DOSes allows to open a single file several times diminishing the intended effect very much. One the other hand not being able to "just printf() something" causes trouble over and again - i.e. hello-world seemingly not working...after all a typical case of german over-enigneering ;-) 2010-02-10 07:43:25 +00:00
oliverschmidt 1ac4d7f501 Used CFS instead of POSIX. 2010-02-08 22:26:19 +00:00
oliverschmidt 5570972957 Added a Contiki app basically combining apps/netconf and apps/dhcp. It's a 6502 specific app as it doesn't configure the running uIP instance but instead writes to the 'contiki.cfg' configuration file used by 6502 apps to configure uIP. 2010-02-08 22:08:17 +00:00
adamdunkels dea4826f94 Added watchdog.c to the USB stick code 2010-02-07 23:05:20 +00:00
adamdunkels 091483c150 Added dummy watchdog functions for all AVR platforms 2010-02-07 07:43:35 +00:00
ksb 387483ad24 Missing file 2010-02-05 16:41:23 +00:00
ksb 2c955d6e3f Synchronizing with my work copy. 2010-02-05 16:23:40 +00:00
ksb cd30fa2b50 Removing obsolete directory, moved to cpu/arm/at91sam7s/ 2010-02-05 15:07:26 +00:00
oliverschmidt 2d40c75efe Allow 6502 ctk programs (all running in non-window mode) to exit the Contiki process by calling LOAD_UNLOAD(). 2010-02-04 23:52:30 +00:00
c_oflynn 95d0b09954 -Fix that can cause USB stick to freeze up
-Add EEM Support
2010-02-04 10:40:00 +00:00
oliverschmidt 4189884793 Don't activate UDP checksums on 6502 targets as the inline-assembler implementation in cpu/6502/net/uip_arch.c is broken! 2010-01-30 20:54:15 +00:00
oliverschmidt 26c9ec41f7 Activate uIP logging when "high level config" logging is enabled. 2010-01-30 20:48:31 +00:00
adamdunkels 4ff6b5460a Removed safeguards around the update code for the timer; turns out they weren't needed (but instead triggered a bug in MSPsim) 2010-01-30 14:03:35 +00:00
anthony-a 76749a382d move cc2430_process to home bank since it needs to be called from a function pointer.
disable led code to make room in home bank.
2010-01-29 19:15:44 +00:00
anthony-a 507460d29a update code bank assignments 2010-01-29 19:13:00 +00:00
adamdunkels dbacf3e781 Values altered in interrupt handlers should be volatile 2010-01-26 10:20:16 +00:00
anthony-a dbdf9982a9 change bank assignments.
add missing header file.
add ihx converter
2010-01-26 02:37:51 +00:00
anthony-a 1427c79b7a include new files in source file list. 2010-01-25 23:24:03 +00:00
anthony-a 6280cea706 remove bank macros which are now in banked.h 2010-01-25 23:13:04 +00:00
anthony-a 9cfe29612a Modifications to support banked code. Interrupts and routines accessed through function pointers reside in independent files so they can be assigned to the HOME bank. Init code can be placed in any bank.
Also add adc init code and bank header files.
2010-01-25 23:12:09 +00:00
c_oflynn 15ffaeed86 Fix for error where USB host could send NAK, but isn't considered in jackdaw, resulting in jackdaw hanging 2010-01-24 13:01:58 +00:00
anthony-a 742c5a0782 add definition for PSBANK used in sdcc crtbank.asm 2010-01-21 15:37:18 +00:00
anthony-a acc1fe923c rules file for assigning code files to specific banks. 2010-01-21 15:34:26 +00:00
anthony-a 2f853dc930 Add support for bank switching and segment.rules file to assign code to banks. 2010-01-21 15:33:19 +00:00
adamdunkels 5a03e4e6ad Bugfix: changed #ifdef to #if, otherwise the SFD code would be enabled anyway 2010-01-19 20:35:41 +00:00
adamdunkels 9d751da8e5 Disable SFD interrupt by default 2010-01-19 13:11:23 +00:00
adamdunkels acea0afb35 Enable a flag when packet SFD seen 2010-01-19 13:11:01 +00:00
adamdunkels 2772d31ae6 Turn off Timer A before modifying its control registers to avoid problems when timer is updated frequently 2010-01-18 21:17:11 +00:00
nifi a364213180 IRQ_PORTx is no longer used. Instead returning port number. 2010-01-14 20:05:58 +00:00
nifi a937f8626c removed files no longer used with new sensor APIs 2010-01-14 18:10:31 +00:00
zdshelby c5ecde4ca0 Fixes and improvements from Anthony Asterisk
- First in 8051def.h,  it appears the uip_arch-asm.S file was copied from z80 and am unsure it will work properly.  I modified the 8051def.h to prevent the UIP code from using these routines.
- In dma.c the config routine provides access to all of the DMA channel options, except for the word mode flag.  In order to maintain compatibility with any existing code I created a second routine and converted the original routine into a wrapper routine with a fixed word mode value.
- uart.c::uart0_init was missing blocking access to the higher baud rates.  I am not sure why, so I corrected this.
- I also copied over to header files that provide some useful macros from the msp430 cpu.  The files are lpm.h and hwconf.h.  The lpm.h is for switching power modes, I think.  The hwconf.h has various macros for configuring port I/O.  By porting these files the led/button api's can be ported with minimal modifications.
2009-12-22 09:28:14 +00:00
matsutsuka 23d5f84a46 Workaround for compiling some examples available 2009-12-16 06:47:17 +00:00
matsutsuka ebe74fed56 size-optimization option and peep-hole optimizer have been introduced.
object files have been moved to binary directory
2009-12-11 14:59:31 +00:00
adamdunkels 9ac4109bad Increased the clock speed to 32768/4 from 32768/8 to provide better accuracy for power profiling of radio CCA checks 2009-12-09 12:55:35 +00:00
adamdunkels f9260c4fae Enable interrupts during the periodic clock processing to allow rtimers to execute on top of the clock 2009-12-08 23:40:14 +00:00
adamdunkels a4df6e0fbf Remove the read from TAIV - this should not be done for TIMERA0 interrupts (in fact, doing so messes up the other timer a interrupts, like the clock tick...) 2009-12-08 23:39:45 +00:00
adamdunkels 873f4d0222 Need to clear the interrupt flag register for Timer A 2009-12-07 14:32:16 +00:00
adamdunkels e3fed27f4a Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files 2009-12-05 19:42:56 +00:00
nifi efdbbf9fe3 minor cleanup: random.c is already included in Makefile.include 2009-11-19 17:33:05 +00:00
nifi 4f2318152e Added support for CPU speed 2.4576MHz and configuration to enable/disable interrupt driven TX 2009-11-18 15:45:32 +00:00
nifi 2640f9bf26 Must check error flag before reading. Removed leds debug. 2009-11-18 13:24:12 +00:00
adamdunkels 790f2f632a Moved putchar into separate file to make it easier to override its implementation 2009-10-30 15:06:26 +00:00
fros4943 53d03aa924 uart correction values for 3.9Mhz (default sky freq.) 2009-10-27 16:25:28 +00:00
oliverschmidt fda46f6800 - cc65 2.13. allows to define all necessary paths through the single env var CC65_HOME.
- cc65 2.13. allows to override the stacksize from the linker command line thus eliminating the need for linker configs maintained by Contiki.
- cc65 2.13. integrates the startup code with the library. In 2.12. the startup code pulled in main(). Now main() is supposed to pull in the startup code. But  if main() resides itself in a library (as with Contiki) then nothing is pulled in at all :-(. The workaround is to pull in main() explicitly through the new option -u (working like the same GCC option).
2009-10-18 11:34:38 +00:00
oliverschmidt 31eb62821f cc65 2.13. features a default-per-target mouse driver so there's no need to deal with their names in Contiki anymore. 2009-10-18 09:33:08 +00:00
zdshelby c89b700631 - Fixed the MAC/RF interface problems, now correctly working with sicslowmac. Tested with rf_test_tx and rf_test_rx. Still needs more thorough testing.
- Corrected a Makefile bug, was complaining about *.d missing
2009-10-15 12:43:53 +00:00
fros4943 b0291ca5a8 bug fix: wake up MSP430 when leaving rtimer interrupt if the rtimer polled a process.
thanks to Marco Vedovati for finding the bug
2009-10-06 09:21:46 +00:00
zdshelby 44a8bc056f - Added mtarch.c and mtarch.h back to /cpu/cc2430. Seems that mt.c needs mtarch.h even though we are not using mtarch right now in this port. 2009-09-29 14:38:51 +00:00
zdshelby d98026ae03 - Added RF address setup function (byte order may not be correct)
- Fixed the interrupt and read functions, now receiving one frame correctly
- Improved the send and read functions to work with sicslowmac.c
- TODO: Still a MAC interaction problem. Although the exact same payload is received and sent up to the MAC as is sent, the MAC doesn't do anything with it. Turn on DEBUG in sicslowmac.c to see the problem.
- Removed mtarch files, not used currently
2009-09-11 08:07:12 +00:00
zdshelby 4a14db6d3a - Fixed a compilation problem caused by 2.3 root Makefile-include changes with regard to sdcc.
- Fixed a small typo in cc2430_rf.c
- examples/sensinode now compiles
2009-09-09 07:32:02 +00:00
zdshelby c9954072c9 Initial commit of cc2430 cpu port files. Currently used by /platform/sensinode. 2009-09-08 20:07:35 +00:00
nifi c6f7ef84fe Initialize the transmit ringbuffer before enabling TX interrupt 2009-09-08 10:39:49 +00:00
joxe 3e8c63cc09 added radio-makefile for avr + rf230 platforms 2009-09-07 12:05:12 +00:00
joxe 8890904aa2 moved radio specifics out of avr Makefile and added some rs232 defs in order to get MicaZ platform working 2009-09-07 12:02:58 +00:00
adamdunkels 18486d4e3d Patch by Gideon Ernst: use explicit $(CONTIKI) path instead of implicit ../../ path to the mknmlist script 2009-09-03 17:41:58 +00:00
dak664 d2a6637627 Block NS echoback from interface 2009-08-13 18:41:00 +00:00
dak664 d37115f2c0 ipv6 fixes and formatting 2009-08-11 16:06:17 +00:00
oliverschmidt f930dadf9f There seems no reason for the whole set_ethaddr() thing if uip_setethaddr() doesn't get called after all. 2009-08-09 20:44:42 +00:00
dak664 72d5442e05 wpcap update for uIPv6 2009-08-08 19:51:25 +00:00
dak664 e64b3d8465 Experimental 64 bit Windows 7 drivers. They work with my Phenom. 2009-08-07 16:45:30 +00:00
oliverschmidt 738397b855 cc65 generates dependency files having the list of prerequisites start with a tab character.
The processing done in the canned command sequence FINALIZE_DEPENDENCY brings this tab character to the beginning of the line making the empty rule look like a command.

Therefore we replace the tab character in question with a blank.
2009-07-26 21:27:43 +00:00
dak664 283d288f1a Allow hello-world to build, fix makefile ignoring rf230bb 2009-07-26 12:10:38 +00:00
dak664 c1b7375a5a *** empty log message *** 2009-07-23 16:13:48 +00:00
dak664 7af93463b5 Remove compiler warnings 2009-07-23 16:10:42 +00:00
dak664 c62efce258 Add useful comment, fix compiler warnings 2009-07-17 13:47:10 +00:00
ksb 823bb613f3 STM32F10x headers from FWLib 2009-07-12 16:41:53 +00:00
ksb baa0dd90c9 STM32F103 port 2009-07-12 15:52:28 +00:00
ksb 030933ee2e OpenOCD configuration for STM32F10xxx 2009-07-12 15:48:55 +00:00
ksb e3fae627f5 Removed reference to obsolete header. Fixed HALTing when the SCSI handler fails. 2009-07-11 17:34:19 +00:00
ksb 53da57ba60 SCSI definitions 2009-07-11 15:25:43 +00:00
ksb 5a07631752 Common SD-card interface, implementing CFS using EFSL 2009-07-11 15:13:55 +00:00
ksb 2c00620fc8 Missing file 2009-07-11 15:10:40 +00:00
ksb f2e4500f88 SCSI RBC 2009-07-11 14:50:08 +00:00
ksb 2c029597a1 Common USB functionality 2009-07-11 14:44:27 +00:00
ksb 44a83a12cd USB mass storage class 2009-07-11 14:43:13 +00:00
ksb c5e62b7205 USB CDC-Ethernet class 2009-07-11 14:37:11 +00:00
ksb 659b3fb7d3 USB CDC-ACM class 2009-07-11 14:30:53 +00:00
ksb 195c23aaa4 printf-style output intended for debugging. Uses less memory and is more flexible than the newlib implementation. 2009-07-11 14:26:28 +00:00
ksb 1f72d3ea32 Moved and updated code for AT91SAM7S 2009-07-11 14:22:45 +00:00
ksb 1658d6b42c Older ELF-loader code, may not work any longer 2009-07-11 14:18:50 +00:00
ksb 4a82069f15 OpenOCD configuration for SAM7S. Should be merged into ../../common/openocd 2009-07-11 14:18:01 +00:00
matsutsuka c55d3ded6c restored specific compilation option since SDCC seems not supporting -MDD very well
introduced a snprintf macro as empty function
2009-07-09 18:26:55 +00:00
dak664 1de298c72a *** empty log message *** 2009-07-08 16:17:07 +00:00
dak664 49989dbe45 Add rf230bb radio driver with conditional make on RF230BB=1 2009-07-08 15:26:17 +00:00
dak664 9aee8dbc16 Fixed bug of no current consequence 2009-07-05 18:50:44 +00:00
oliverschmidt 7a228fea41 Replaced classic approach of generating dependency files via rule with generating them as side effect of generating object files. The issue with "No rule to make target ..." is solved as suggested in http://make.paulandlesley.org/autodep.html.
At least with gcc (and cc65) the dependency files are generated without an additional run of the C compiler. This is especially beneficial on Cygwin because of the fork() performance issue.
2009-07-02 22:36:04 +00:00
adamdunkels 00890caca8 Make sure that symbols.c is included in every native cpu build, not just the native target 2009-05-12 17:23:23 +00:00
nvt-se 172ffb74c7 fix compiler warnings. patch from Jesper Karlsson. 2009-04-08 14:56:00 +00:00
nifi 1c6264fddc reordered build path to use cpu files before core 2009-04-06 13:10:14 +00:00
nifi 43c2ccf5d8 fixed clock_seconds to use full 32 bit 2009-04-06 13:08:42 +00:00
nifi c1d490b6a7 added workaround for memcpy/memset bug in mspgcc 2009-04-06 13:07:37 +00:00
joxe 4f41b30b2b fixed variable names 2009-04-02 22:39:29 +00:00
joxe 7d2a08b29c added initial set-up code SFD capture interrupts usable for exact packet timestamping 2009-04-02 22:23:06 +00:00
adamdunkels 727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels b20f0884ed Renamed serial module to serial-line 2009-03-17 20:19:11 +00:00
adamdunkels 0076bfe8a5 Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy 2009-03-17 15:56:32 +00:00
fros4943 4275ff4a9c added support for 64-bit architectures, as already added on the cooja mtarch clone (patch provided by Jesper Karlsson and David Gustafsson) 2009-03-13 15:02:23 +00:00
fros4943 da8ee90ef3 reverted last commit (sorry, committed wrong file.. :) 2009-03-13 14:49:10 +00:00
fros4943 d6ebba536c minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4 2009-03-13 14:40:07 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
adamdunkels 62ef4002a5 Always prod the watchdog on output to avoid spurious resets during long serial outputs 2009-03-02 22:01:26 +00:00
adamdunkels 6ab7ac0598 Added optional interrupt-based transmission, based on the ringbuf library 2009-03-01 20:40:30 +00:00
oliverschmidt 1585077da7 Adjusted cfs_seek() offset type configuration macro name. 2009-03-01 12:26:53 +00:00
oliverschmidt d0b7d22229 Adjusted CFS implementations to the recent CFS API changes. 2009-02-28 11:45:35 +00:00
nvt-se a0226e2418 switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET) 2009-02-27 14:28:02 +00:00
adamdunkels e34e97cd6f Minor code style fixes 2009-02-24 21:30:20 +00:00
nvt-se bff9841fbf Removed obsolete definitions. 2009-02-20 23:16:08 +00:00
joxe 80848e4106 added DCO-resync function and default config 2009-02-04 18:28:44 +00:00
joxe 5a8dc2df28 added handling function for checkin if uart is transmitting or receiving - patch by Klaus Stengel 2009-01-31 12:46:57 +00:00
oliverschmidt 3c2662519f Tried to make reference to Microsoft TechNet Forum thread more persistent. 2009-01-15 22:17:47 +00:00
nifi 9bf0dff605 Compile using . instead of separate make rules for .firmware 2008-12-16 13:54:25 +00:00
c_oflynn 5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
joxe 23b7db88d5 moved rtimer from TimerB to TimerA so that TimerB subsystem is free for other uses 2008-12-02 12:44:48 +00:00
c_oflynn c0e2fd1110 Oops - as pointed out by Daniel Willmann change had a duplicate statement... fixed! 2008-11-29 18:36:12 +00:00
c_oflynn 9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
nifi 2013c4fece Simulator for MSP430-based platforms 2008-11-24 11:09:36 +00:00
fros4943 1fbcfde0d6 implemented support for data argument when starting threads:
given function is called from a wrapper instead of immediately returned to via the stack
2008-11-21 10:28:32 +00:00
oliverschmidt 4b268298cc Added infos on Vista loopback connection handling. 2008-11-17 22:38:05 +00:00
oliverschmidt a844636218 Minor docu update. 2008-11-13 20:26:27 +00:00
c_oflynn 5ff23c0bec Addition of Atmel Radio Control Board (RCB), device in RZ200 kit 2008-11-09 15:39:49 +00:00
c_oflynn b6e76a4947 Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface 2008-11-08 17:11:18 +00:00
c_oflynn f13ec95efa *** empty log message *** 2008-11-08 03:29:15 +00:00
c_oflynn e1463c25a0 Fixed bug that non-IPv6 would hang Jackdaw 2008-11-07 20:32:46 +00:00
c_oflynn 46853d9395 * Channel is saved in EEPROM
* Allow serial port to work with more term emulators
2008-10-27 18:03:25 +00:00
c_oflynn ebb335335a *Added ability to change channel Jackdaw (raven USB) operates on over serial menu 2008-10-26 01:27:55 +00:00
c_oflynn 219846f408 Addition of USB files 2008-10-14 20:16:36 +00:00
c_oflynn a520fe4646 Lots of changes / commits! This allows ravenusbstick example to build at least. 2008-10-14 19:06:51 +00:00
c_oflynn 6e3ee0d917 More updates for raven 2008-10-14 18:38:09 +00:00
c_oflynn a73ed65dac Fixing more possible out of date files. 2008-10-14 18:37:28 +00:00
c_oflynn 15ba03fea5 Adding updated files 2008-10-14 18:36:07 +00:00
c_oflynn 9cc14d43ef Fixing some files... 2008-10-14 18:35:29 +00:00
julienabeille 2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille 30f545c397 *** empty log message *** 2008-10-14 14:54:23 +00:00
julienabeille 085df124fd tapdev update for uIPv6 2008-10-14 14:38:10 +00:00
julienabeille 632a3585f5 Modification to tapdev for IPv6 support 2008-10-14 09:47:15 +00:00
adamdunkels cdb6226598 Changes to support the Atmel AVR Raven port 2008-10-14 09:44:12 +00:00
adamdunkels db7d9bb131 Radio and 802.15.4 MAC code for the Atmel AVR Raven board 2008-10-14 09:43:40 +00:00
nifi 49f57b7848 changed to use unsigned long for seconds counter 2008-10-10 12:36:58 +00:00
joxe 8748230ead changed usart code to handle LPM3 2008-09-18 17:59:27 +00:00
fros4943 b90075ea0a bug fix, msp430 hw bug (undocumented):
when in continuous/compare mode the interrupt handler may get called before CCR==TR.

behavior observed when the timer is toggled between STOP/CONT in an external interrupt handler (serial input).

possibly this problem may also affect watchdog timer/timer B
2008-09-16 12:00:48 +00:00
fros4943 3ec170cdf5 added empty mtarch_stop() 2008-08-27 13:10:29 +00:00
oliverschmidt f822ac9797 Added clock_seconds() implementation. 2008-07-12 14:44:37 +00:00
adamdunkels fc6d059d24 Added a clock_seconds() function prototype to core/sys/clock.h, that returns seconds in 32 bit format. On platforms like the MSP430, which has a 16 bit native datatype, this cannot be implemented with an interrupt tick that increments a 32 bit value because access is not atomic. Instead, the MSP430 code increments 16 bit seconds value and converts this into a 32 bit value through an offset calculation. If the new value is smaller than the last check, the offset is incremented by 65536. This change also means that CLOCK_CONF_SECOND must be a power of two because a modulo operation is used inside the periodic tick interrupt handler. 2008-07-07 23:38:09 +00:00
oliverschmidt c9a8eea371 Added cfs_seek to the preprocessor level implementation of the cfs API. 2008-07-06 07:28:05 +00:00
nvt-se 6440c3de81 removed unnecessary inclusion 2008-07-04 03:03:41 +00:00
adamdunkels 62b7ef5173 Moved energest from lib/ to sys/ 2008-07-04 00:02:21 +00:00
adamdunkels 64b6663b11 moved energest from lib/ to sys/ 2008-07-03 23:59:20 +00:00
adamdunkels 871598fb24 Added dummy watchdog.c to allow compiling and running code that calls the watchdog functions 2008-07-03 23:10:25 +00:00
matsutsuka d194d54e8e CC_CONST_FUNCTION replaces some const keywords in order to workaround a sdcc bug, which cannot handle function pointers as const. 2008-07-02 15:02:33 +00:00
adamdunkels 7c459c849d The .ihex file use the intermediate Contiki-wide .$(TARGET) target instead of the MSP430-specific .firmware 2008-07-02 14:11:34 +00:00
adamdunkels 66876625d4 Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*. 2008-07-02 09:05:40 +00:00
matsutsuka 29b17c6933 Modified some glitches in startup code, and introduced additional typedefs required in the current version. 2008-07-02 07:13:22 +00:00
adamdunkels 1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
adamdunkels 2569a8fc69 Removed unused file 2008-07-01 20:59:44 +00:00
adamdunkels 9d7c81d4ed Added missing IPBUF definition needed for IPv6 2008-06-23 19:53:16 +00:00
adamdunkels d094fe254f Fixed problems with IPv6-enabled Windows XP 2008-06-23 19:52:44 +00:00
oliverschmidt f6c310d90a I'd better don't try to be smart by including read access into every write access - as the cc65 CBM POSIX file I/O library doesn't allow for both reading and writing at all. 2008-06-16 11:20:22 +00:00
oliverschmidt 456d7ad45e Updated URL. 2008-06-13 20:08:06 +00:00
oliverschmidt d619b095a9 Added some info on the high-level config macros (and other stuff). 2008-06-12 22:15:50 +00:00
oliverschmidt 929da590be Removed '!' as gnumake already adds '.'. 2008-05-22 19:43:08 +00:00
adamdunkels 31ea41d8db Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level 2008-05-14 19:19:28 +00:00
joxe 57dedee38f enabled ADC IRQs if ADC sensors active 2008-04-25 15:53:55 +00:00
oliverschmidt b7958e3472 Fixed minor copy&paste issue. 2008-03-29 15:22:39 +00:00
oliverschmidt 3d1d6e333c Added high level config macro for the new compiletime forwarding option. 2008-03-29 15:21:51 +00:00
oliverschmidt e72ca9e5d4 Allow division by RTIMER_ARCH_SECOND to compile. 2008-03-28 22:38:03 +00:00
oliverschmidt a500f2dd73 Removed unused variable. 2008-03-04 22:56:54 +00:00
oliverschmidt a7e73d030a Added naive snprintf support. 2008-02-16 08:56:29 +00:00
adamdunkels da49b950d4 Count the number of times the watchdog has been stopped to avoid starting it when someone else has stopped it 2008-02-11 10:45:19 +00:00
adamdunkels 660b7f9a78 Initialize watchdog instead of stopping and starting it 2008-02-11 10:44:49 +00:00
oliverschmidt a685acd23a Turned rtimer_arch_now() from a (one line) function into a macro. 2008-02-09 14:02:12 +00:00
oliverschmidt 604a9c2bf0 Removed (now obsolete) PROCESS_LOADABLE. 2008-02-07 19:56:56 +00:00
adamdunkels cf5ff2bbb2 Made SLIP code coexist with ordinary serial code. If WITH_UIP=1, the SLIP code is used instead. 2008-02-03 20:59:35 +00:00
adamdunkels e68d669265 Added improvements suggested by Hardy Greich: define CPU speed in one place only (contiki-conf.h), added nop to XTAL settlement delay 2008-02-03 20:58:11 +00:00
adamdunkels a4d5ca833c Update the periodic watchdog only if it is not stopped 2008-01-21 10:39:23 +00:00
adamdunkels f2599b38e7 Added a WERROR variable, which, if set, causes -Werror flags to be turned on 2008-01-17 12:07:32 +00:00
adamdunkels a46aceb5f8 Added generation of symbols.c if CORE is set 2008-01-08 08:04:41 +00:00
adamdunkels e16b7ffcf0 Changed the return value of the inpt handler function to int so that it can wake up the CPU from LPM 2008-01-08 08:04:09 +00:00
adamdunkels 7f05b8a5ef Added a reboot function 2008-01-08 08:03:02 +00:00
adamdunkels b50d2b02ee Reformatting to comply with code style 2008-01-08 08:01:41 +00:00
adamdunkels 345d0a8a79 Added a WERROR definition that can be used to turn -Werror on 2008-01-08 08:01:01 +00:00
oliverschmidt b96c9deebc Added "usual" comments. 2008-01-04 21:53:32 +00:00
oliverschmidt bb19396d21 Introduced yet another high-level config macro. 2008-01-01 19:47:03 +00:00
oliverschmidt 216d20dabb Allow to implement cfs API on preprocessor level using a "pfs" (platform file system) by setting a new high-level config macro. 2008-01-01 17:44:24 +00:00
oliverschmidt faad65bddd Use cfs filesystem to allow for specific implementations. 2007-12-24 00:13:28 +00:00
oliverschmidt 93ff3add1f Use cfs filesystem to allow for specific implementations. 2007-12-23 15:37:28 +00:00
oliverschmidt 5592b1df6c Implement cfs API on preprocessor level using POSIX functions.. 2007-12-23 15:29:19 +00:00
oliverschmidt fda38428d9 Introduced some more high-level config macros. 2007-12-23 13:55:38 +00:00
oliverschmidt 14a8cf7200 Made use of the new high-level config macros. 2007-12-23 12:33:57 +00:00
oliverschmidt 125f261b7d Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios. 2007-12-23 12:32:43 +00:00
oliverschmidt 0564cc50fd Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all. 2007-12-21 01:36:01 +00:00
oliverschmidt 102e3e2a24 Make use of fastcall. 2007-12-21 01:13:44 +00:00
oliverschmidt e4086d8374 Use cfs filesystem to allow for specific implementations (and make use of fastcall). 2007-12-21 01:04:29 +00:00
oliverschmidt ae4978e994 Moved z80 specific line to z80 makefile. 2007-12-21 00:49:40 +00:00
oliverschmidt 1863f8aef2 Added generic ctk mouse implementation based on cc65 mouse drivers. 2007-12-20 22:47:39 +00:00
oliverschmidt 2c45596f5c Optimized non-logging scenario. 2007-12-20 20:49:59 +00:00
oliverschmidt 14fa993204 Define an empty rtimer_arch_now() macro to keep compiler happy. 2007-12-20 20:28:34 +00:00
oliverschmidt 333ad36a4a Added general ctk support to the cc65 build. 2007-12-16 17:03:27 +00:00
oliverschmidt f55b3cfe0e So we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 17:02:37 +00:00
oliverschmidt 8644822a34 Soe we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 13:08:09 +00:00
oliverschmidt 805f3f87d3 Make the "empty" error_exit implementation the default to be optionally overridden. 2007-12-16 13:05:23 +00:00
oliverschmidt b32f0643ab Moved stuff into sys subdir to clean up the apple2enh dir (and because the corresponding shared res. cpu stuff is in the sys dir as well). 2007-12-15 11:04:11 +00:00
oliverschmidt e59252ab29 Moved stuff into sys subdir to clean up the 6502 dir (and because the corresponding shared stuff is in the sys as well). 2007-12-15 00:14:18 +00:00
oliverschmidt 983688bef6 Use C99 type to typedef Contiki types. 2007-12-15 00:06:27 +00:00
joxe f997ec6231 fixed defs and to compile for atmega32 also - has no TCNT3 2007-12-11 17:21:14 +00:00
oliverschmidt 2bcabc061d Optimized to work with logging turned off. 2007-12-08 22:34:59 +00:00
oliverschmidt 382603b581 Made error_exit() implementation target-specific. 2007-12-08 22:21:50 +00:00
oliverschmidt 70321f690f Made error_exit() implementation target-specific. 2007-12-08 22:16:43 +00:00
oliverschmidt 4defaddf31 Avoid pulling in the DNS client. Later we'll want to have this configurable. 2007-12-08 21:48:49 +00:00
oliverschmidt a54195ff04 Fixed to work with logging turned off. 2007-12-08 21:47:26 +00:00
oliverschmidt 69a16d89c5 Fixed typo. 2007-12-08 21:19:06 +00:00
oliverschmidt a980f40bf6 Take in account that the C64 Retro Replay clockport needs to be activated in order to work with the RR-Net Ethernet card. 2007-12-08 21:05:48 +00:00
oliverschmidt 1afc872a29 cc65 has recently become more restrictive... 2007-12-06 10:36:33 +00:00
oliverschmidt 45988fdfd0 Fixed LAN91C96 driver. 2007-12-01 20:23:11 +00:00
oliverschmidt 9f1feb6e26 Added LAN91C96 driver. 2007-11-30 12:34:08 +00:00
oliverschmidt 66717d11ba Generic SMSC LAN91C96 driver for cc65 targets. The driver is intended to be loaded dynamically as relocatable module. It modifies itself to accomodate different Ethernet IO address locations:
- ETH64 ($DE10)
- Apple2 LANceGS ($C0x0)
2007-11-30 12:32:07 +00:00
oliverschmidt b51a680a02 Minor optimization. 2007-11-29 21:56:55 +00:00
fros4943 3a0ba03407 added experimental avr rtimer-arch implementation
8 seconds wraparound
2007-11-29 02:44:05 +00:00
oliverschmidt 394d70c57d Added some info on the 6502 targets. 2007-11-28 18:19:14 +00:00
adamdunkels 95ffdc283e Forgot to remove -Werror 2007-11-28 17:17:19 +00:00
adamdunkels 7e89af8992 Removed -Werror -pedantic and -std=c99 because of problems with compiling under Linux 2007-11-28 17:15:15 +00:00
matsutsuka 80f858b68b typedef uint8_t, uint16_t, and uint32_t have been added to help some sources. 2007-11-28 09:36:06 +00:00
matsutsuka fbb8fb409a The Micro-Executable Format (MEF) support (experimental). 2007-11-28 06:13:24 +00:00
oliverschmidt 9d39b4be54 Added global error_exit() and config read function to build. 2007-11-27 21:43:32 +00:00
oliverschmidt 6028fccc39 Added read function for a simple binary config file. 2007-11-27 21:42:02 +00:00
oliverschmidt 67af780c93 Made include paths consistent. 2007-11-27 20:54:10 +00:00
oliverschmidt 20824c5603 Make use of global error_exit(). 2007-11-27 20:52:52 +00:00
oliverschmidt 2ef0eec6f6 Made error_exit() globally available. 2007-11-27 18:17:47 +00:00
oliverschmidt 18d591206e Added (default) log implementation for cc65 targets. 2007-11-27 16:48:44 +00:00
oliverschmidt 689e0f077a Added some info on the wpcap driver. 2007-11-27 13:06:55 +00:00
adamdunkels 6e0e6e1279 Removed -Werror since LPM*_EXIT; and friends trigger an internal mspgcc compiler error 2007-11-26 23:23:20 +00:00
oliverschmidt 74c4e10f23 No reason to not just compile petsciiconv.c for all cc65 targets. 2007-11-25 21:43:55 +00:00
oliverschmidt 7fc383e100 Minor change in comment. 2007-11-24 12:57:09 +00:00
fros4943 2564882015 only create full symbols list if SYMBOLS is defined 2007-11-23 06:22:52 +00:00
oliverschmidt 5608e2d451 Minor adjustment to predominant coding style. 2007-11-22 11:41:18 +00:00
oliverschmidt a2dd620ecc Allow the webserver and telnetd examples to build. 2007-11-22 11:40:17 +00:00
oliverschmidt da44474fd4 Generic Ethernet driver for cc65 targets. The actual hardware driver is loaded as relocatable module. 2007-11-20 21:10:20 +00:00
oliverschmidt e6e6ea415c Generic Cirrus Logic CS8900A driver for cc65 targets. The driver is intended to be loaded dynamically as relocatable module. It modifies itself to accomodate different Ethernet IO address locations:
- C64 TFE ($DE00)
- C64 RRNet ($DE08)
- Apple2 Uther ($C0x0)
2007-11-19 23:14:14 +00:00
oliverschmidt 9a96dbca03 Moved currently inconsistent files to backyard to clean up for release 2.1 2007-11-19 23:00:33 +00:00
joxe a4985fd1f7 removed offset in rtimer_arch 2007-11-19 22:38:57 +00:00
ksb 437ba5bbf4 Removed warnings 2007-11-18 12:18:59 +00:00
oliverschmidt d609db3580 Removed compiler warnings. 2007-11-18 01:36:59 +00:00
oliverschmidt eabf01903d Replaced most type definitions with reference to stdint.h. 2007-11-17 23:42:23 +00:00
oliverschmidt b8b6b6239e Allow to build both with Cygwin and VC++. 2007-11-17 21:33:53 +00:00
oliverschmidt eb3fda68c7 Source reformatting only. 2007-11-17 20:00:42 +00:00
adamdunkels 1e1e44a3f8 Fixed compiler warnings to make code compile with gcc's -pedantic switch 2007-11-17 18:01:00 +00:00
adamdunkels 1070fe19a3 Added rtimer_arch_now prototype 2007-11-17 10:47:22 +00:00
adamdunkels 4ce9b8a33b Added -Werror to turn compiler warnings into errors to ensure that code always compile without warnings 2007-11-17 10:37:28 +00:00
adamdunkels 2132462716 Updated to use the watchdog API 2007-11-17 10:28:04 +00:00
adamdunkels 19b7bd9217 Fixed watchdog support for the MSP430. It now works as intended 2007-11-17 10:16:48 +00:00
adamdunkels 22cb35e9f6 Added -Werror to turn compiler warnings into errors to ensure that code always compile without warnings 2007-11-17 10:11:58 +00:00
fros4943 53ea3cd7bf removed symbols from .elf output (but always included with .out)
+ uncommented unused %.ce target (check Makefile.include to enable it)
2007-11-16 09:19:22 +00:00
adamdunkels f192211444 Added a hack function called clock_counter() to make the current prototype profiling code run on the MSP430 platform 2007-11-12 21:07:39 +00:00
adamdunkels 585f00a804 Removed old codeprop-tmp.c 2007-11-06 20:35:42 +00:00
fros4943 deeed3389a added dummy RTIMER definition 2007-11-01 16:26:58 +00:00
fros4943 559e3eb6ea removed platform specific definitions
+
changed default linker to gcc (as for the default linker arguments)
2007-11-01 16:26:31 +00:00
joxe 7fe87db86a fixed some timer interrupt bugs and reimplemented clock_fine to avoid disabling interrupts 2007-10-04 20:45:29 +00:00
fros4943 5f63995265 support for delayed interrupts
earlier TACCR1 could be set to already passed time if timer A interrupts was delayed
2007-10-04 14:14:58 +00:00
matsutsuka 0ab5a22a47 Fixed a minor glitch 2007-10-01 23:04:02 +00:00
matsutsuka 4d6d5eb8ff RS232 support has been unified from just 'dumb' serial line and SLIP support. 2007-09-29 03:58:38 +00:00
matsutsuka f553789fea Made unnecessary symbols static. 2007-09-29 03:57:39 +00:00
matsutsuka 1e6ac84151 Customized crt0 has been introduced to fix some SDCC glitches. 2007-09-29 03:57:07 +00:00
matsutsuka 8d5e863b9a File names are changed. 2007-09-19 12:48:26 +00:00
matsutsuka c99b7dc827 status has been added for polling function. 2007-09-19 12:47:19 +00:00
matsutsuka eb39a24ad8 Char bug seems to be fixed in the newer version of sdcc. 2007-09-19 12:44:01 +00:00
matsutsuka 7b402d38f8 The suffix for preprocessed assembler file has been changed from ".hS" to ".cS" 2007-09-19 12:41:33 +00:00
nvt-se 1d4db3e2cc The function was missing the case when the stack was used completely,
and didn't return a value then.
2007-09-14 20:21:01 +00:00
matsutsuka c258a2e83a library extension has been modified form .o to .a 2007-09-11 12:11:38 +00:00
matsutsuka cce43c2efc Baud-rate has been added to the architecture-depend initialization.
Enabled packaged buffer reading.
2007-09-11 12:03:20 +00:00
matsutsuka cd971ff8cc sdcc-custom-rule has been added to makefile.z80 2007-09-10 15:09:28 +00:00
matsutsuka fe980b4445 Comment and include files are slightly changed for readablility. 2007-09-09 13:41:50 +00:00
matsutsuka 259c5a00b9 Some gliches and filenames are changed regarding RS-232C driver. 2007-09-09 13:41:15 +00:00
matsutsuka c58e4f94b8 Screen-bsae logging implementation. 2007-09-09 12:23:03 +00:00
matsutsuka 17da4a73be Not signal but polling-based rs-232c process. 2007-09-09 12:22:34 +00:00
matsutsuka 91a57c89ba VRAM based default implementation of libconio_arch. 2007-09-09 12:21:54 +00:00
matsutsuka f9a01d6282 strcasecmp is moved to lib directory 2007-09-09 12:20:59 +00:00
matsutsuka 88c30a63a5 Directory of some sources files has been moved. 2007-09-09 12:20:12 +00:00
matsutsuka efbe8ab536 renamed contiki-sdcc-conf.h to z80def.h in order to follow the convention of cpu-dependent configuration header file name. 2007-09-07 04:59:06 +00:00
nvt-se b4f3ab5af7 Added support for configurable callbacks of uart1 input. 2007-09-06 11:45:08 +00:00
matsutsuka d44a1e97e6 int32_t typedef is added to make compatibility with rand.c 2007-09-06 01:41:05 +00:00
matsutsuka 582a7476d4 *-dsc.c files have been changed to remove forward reference for struct_icon variable, bacause it is strange that this variable is used wholly inside the C source file and declared extern for the forward reference. 2007-09-06 01:36:10 +00:00
oliverschmidt 89e81f9eed Renamed 6502-conf.h into 6502def.h to be in line with similiar files created in the meanwhile and added C99 names. 2007-09-05 10:59:10 +00:00
joxe aaae9f4cf8 removed redundant code - configuration of basic clock subsystem in clock and rtimer_arch 2007-09-03 19:22:37 +00:00
matsutsuka 4766593ff7 Add assembler checksum calculation support for z80 port. 2007-09-01 11:14:50 +00:00
ksb af9bf1810c The file is generated from string-descriptors.xml, but since it probably won't change and not everyone has xsltproc I'm putting it in CVS. 2007-09-01 10:12:54 +00:00
ksb 9d5a2aed80 Added USB (specifically CDC-ACM) support 2007-09-01 10:00:35 +00:00
matsutsuka 3af69d229a Added some comments. 2007-09-01 01:09:25 +00:00
matsutsuka cc2b6e58d7 Followed a coding convention of contiki, in which cast operation should not be followed by a space char. 2007-09-01 01:08:07 +00:00
oliverschmidt 34af8fbc1a Fixed recent change. 2007-08-30 20:47:14 +00:00
matsutsuka 9d4fc0a1a8 Support for z80(sdcc) port.
In order to support, some core modules are modified as follows:

core/sys/dsc.h
- If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled.
- DSC_HEADER is changed to remove extra semicolon.

core/sys/process.h
- process_data_t is expressed by void* in signatures (known bug on sdcc).

core/sys/autostart.h
- autostart_processes is changed to remove extra semicolon.

core/sys/cc.h
- CC_CONF_ASSIGN_AGGREGATE is introduced.
- CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind
  of sdcc bug for an increment.

core/net/hc.c
core/net/uip_arp.c
core/net/uaodv.c
- Aggregation assignments are changed to uip_ipaddr_copy.

core/net/psock.c
core/net/uipbuf.c
core/net/dhcpc.c
apps/shell/shell.c
core/ctk/vnc-server.c
core/ctk/vnc-out.c
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

core/net/uip-over-mesh.c
- An extra semicolon is removed.

apps/dhcp/dhcp-dsc.c
apps/shell/shell-dsc.
apps/ftp/ftp-dsc.c
apps/process-list/process-list-dsc.c
apps/email/email-dsc.c
apps/webserver/webserver-dsc.c
apps/vnc/vnc-dsc.c
apps/vnc/vnc-viewer.h
apps/webbrowser/www-dsc.c
apps/about/about-dsc.c
apps/irc/irc-dsc.c
apps/telnet/telnet-dsc.c
apps/telnetd/telnetd-dsc.c
apps/netconf/netconf-dsc.c
apps/directory/directory-dsc.c
pps/calc/calc-dsc.c
- Modify an extern type to a real declaration, which is static
  to prevent a compile error.

core/net/mac/xmac.c
- Variables cannot be defined in a head of block on sdcc.

core/ctk/ctk.h
core/ctk/ctk.c
apps/program-handler/program-handler.c
- If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled.

Makefile.include
- Add a set of configuration for an assembler.
- $(CLEAN) variable is introduced for customized cleanup.

apps/process-list/process-list.c
- PROCESSLIST_CONF_HEIGHT is introduced to address smaller screen size.

core/lib/ctk-filedialog.c
- FILES_CONF_HEIGHT is introduced to address smaller screen size.
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

apps/vnc/vnc-viewer.c
- A cast is added to prevent a compile error.
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

apps/webbrowser/webclient.c
- CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind
  of sdcc bug for an increment.

core/loader/elfloader.c
- A cast is added to prevent a compile error.

core/net/rime/rimeaddr.c
- An initialization is added to prevent a compile error.

core/net/rime/rudolph0.c
- NULL is changed to 0, because NULL causes a compile error.

core/net/rime/route-discovery.c
- Add an argument to match the definition of nf_callbacks.

cpu/z80/strcasecmp.h
cpu/z80/strcasecmp.c
cpu/z80/contiki-sdcc-conf.h
cpu/z80/mtarch.c
cpu/z80/mtarch.h
cpu/z80/Makefile.z80
- New files to make compilation availble on sdcc.
- Added support for multithreading.
2007-08-30 14:39:16 +00:00
ksb 792eae91c6 rtimer implementation (not well tested)
sprintf that use strformat, so there's no need to pull in the newlib
implementation.
Build system improvements.
2007-08-21 09:03:55 +00:00
bg- 0fedf8845d * Standard defines for AVR. 2007-08-16 13:20:09 +00:00
bg- dcafdfe51a * Standard defines for MSP430. 2007-08-16 13:09:06 +00:00
oliverschmidt 63a6493e5c Made tapdev and wpcap driver similiar making up a "driver template". 2007-08-10 14:59:59 +00:00
oliverschmidt 1c77f6f1d5 - The cc65 assembler variable 'ptr1' (a general zero page pointer) is actually part of the cc65 zero page area so it's a bad idea (tm) to use it in swapping that very area.
- The cc65 assembler variable 'sp' (the pointer to the C stack) is actually part of the cc65 zero page area so there's no need to manage it explicitly. Furthermore it is known to reside at the very start of the area so it can be initialized there for new threads.
2007-08-10 10:45:35 +00:00
oliverschmidt 9399718ede Cosmetic change... 2007-05-29 22:25:49 +00:00
oliverschmidt b23f4fc89d Added a Contiki clock_time() implementation based on the cc65 clock() implementation. 2007-05-29 21:56:21 +00:00
oliverschmidt c874d56f32 Clock implementations are typically not located in a lib subdirectory. 2007-05-27 21:29:18 +00:00
oliverschmidt 75f04995a9 Changed packet drivers from services to plain processes.
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.

Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
2007-05-26 23:05:36 +00:00
oliverschmidt 6ab3a6d1e3 Fixed copy&paste bug. 2007-05-26 22:51:38 +00:00
oliverschmidt f0d5a14745 Moved into backyard as it was never ported to Contiki 2.x. 2007-05-26 21:28:30 +00:00
adamdunkels 2c53a38075 Architecture dependent code for the CC2420 driver 2007-05-25 08:07:54 +00:00
oliverschmidt 9ab8b78381 Moved cc65 loader requiring "labels hack" into backyard. 2007-05-23 23:49:45 +00:00
oliverschmidt a22c543b1a Moved cc65 specific app into backyard. 2007-05-23 23:47:16 +00:00
oliverschmidt 1629c207b5 That PROCESS_EXITHANDLER() thing was after all kind of overengineered... 2007-05-23 22:13:29 +00:00
oliverschmidt 0bf8c95b79 Made use of exit handler. 2007-05-22 22:01:03 +00:00
adamdunkels 00b1e371cf Added energy estimation, disabled IRQs for A/D converting as it used close to 100% CPU time 2007-05-22 21:01:32 +00:00
adamdunkels 3872d004bc Reading timer now quicker, embryo for possible future drift configuration 2007-05-22 21:00:09 +00:00
adamdunkels 432d242a3c Added energy estimation, embryo for possible future drift configuration 2007-05-22 20:59:47 +00:00
adamdunkels 9a5bac6282 Added energy estimation 2007-05-22 20:59:11 +00:00
bg- 3f4ec3cf44 * Use _end rather than nonstandard __bss_end. 2007-05-21 15:29:46 +00:00
bg- d68e4bd3df * Add missing file. 2007-05-21 14:28:14 +00:00
oliverschmidt 5f3296e943 Changed packet drivers from services to plain processes.
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.

Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
2007-05-20 21:29:39 +00:00
oliverschmidt 61f54204d7 Improved map file naming consistency. 2007-05-19 21:46:43 +00:00
oliverschmidt 51509fa49a Added dummy value to allow for building. 2007-05-19 13:20:37 +00:00
oliverschmidt ae2073cac9 Factored out setup directory search path for source files into Makefile.include.
- All compilers used support the -I option for setting an include search directory.

- The Contiki source tree follows the (common) approach of placing declarations (in headerf iles) in the same directory as definitions (in source files).

As a result it makes sense to use the -I compiler option for just the same set of directories used for the vpath gnumake directive.

Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
2007-05-19 07:54:53 +00:00
adamdunkels 4364a9929a Removed WITH_UIP 2007-05-15 08:09:45 +00:00
oliverschmidt 237b1617b5 Factored out setup directory search path for source files into Makefile.include.
- Search target specific directories before CPU specific directories.
- Search CPU specific directories before generic directories.

Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
2007-05-13 08:41:11 +00:00
oliverschmidt 4fd1e3ece0 Added signed 32 bit data type. 2007-05-12 20:58:12 +00:00
oliverschmidt 8d3496194f Added Multithreading support to the cc65 targets based on the Contiki 1.x C64 implementation with the following changes:
- Added support for the function parameter.
- Removed support for preemption because:
  - No other current implementation does so.
  - Preemption support would make the code at least target-dependent or it wouldn't work at all (as on plain Apple2 machines without timer interrupt).
2007-04-21 22:15:45 +00:00
oliverschmidt ec2411d5ea Structured the cc65 makefile like all the other makefiles in the Contiki 2.x build system. 2007-04-21 15:04:23 +00:00
oliverschmidt 5d62bbd039 Used SED to replace the assembler sources with the objects in the dependency file generated by the cc65 compiler. This allows to hide the assembler sources from GNU make which solves several issues. Now the cc65 toolchain behaves very similiar to gcc from the GNU make perspective. 2007-04-21 13:23:47 +00:00
oliverschmidt 48977bd89f Replaced the PROJECT_OBJECTFILES hack with puting the Contiki library (containing contiki-main.o) and the cc65 libary into a cc65 "library group" which allows mutual crossreferences between the libraries in the group. 2007-04-18 22:52:22 +00:00
oliverschmidt f3502e2ca4 Added NOP headers in order to allow build. 2007-04-18 21:38:55 +00:00
oliverschmidt c7e8ac499e Consistently use curly brackets for function calls (and add the same disclaimer as used in "my" other makefiles). 2007-04-14 15:55:50 +00:00
oliverschmidt 9cf544c45e Added the same disclaimer as used in the header file. 2007-04-14 15:48:42 +00:00
oliverschmidt 274afdb55c Made driver compilable with both Cygwin and VC++ (and usable for platform/win32 by using logging API). 2007-04-11 00:21:28 +00:00
oliverschmidt 9cc1871810 Fixed stupid bug. I have no idea how I didn't run into this one for months ! The development platforms have 400-600 bytes buffer size. So every incoming 1500 packet overwrote ~ 1000 bytes of uIP variables. And this happens very easily as every packet coming in for the Windows IP stack is seen by uIP as well (and discarded because of the wrong IP address). 2007-04-08 20:06:56 +00:00
adamdunkels b2b750e83b rtimer_arch_now() now returns the correct value 2007-04-07 05:45:08 +00:00
oliverschmidt e37d79e4a3 Don't rely on gcc's auto-import feature. 2007-04-07 00:27:22 +00:00
oliverschmidt e5d3453a79 Minor code formatting change. 2007-04-05 19:42:47 +00:00
oliverschmidt be08e76366 Now that Contiki has a htonl() we need the same workaround here that we already have for htons(). 2007-04-05 19:41:02 +00:00
bg- 8aa34f1ea4 * remove author. 2007-04-04 11:53:07 +00:00
adamdunkels 08d825c450 Added rtimer-arch.c 2007-04-03 19:05:13 +00:00
adamdunkels b108ca702a Fixed description 2007-04-03 19:04:27 +00:00
adamdunkels 00645113e5 MSP430 real-time rtimer support using timerb1 2007-04-03 19:03:09 +00:00
oliverschmidt d41c0671d9 Ooops, that was one level of indirection to much. 2007-04-03 18:37:15 +00:00
oliverschmidt aa4434ca55 CPU agnostic implementation of the platform specific part of the multi-threading library. Uses fibers on Windows and the ucontext functions on other platforms. 2007-04-03 00:40:51 +00:00
joxe 8add3d4660 corrected comments 2007-04-02 16:32:20 +00:00
oliverschmidt 5bceecfbb0 Added Cygwin networking support using WinPcap. 2007-04-01 21:05:17 +00:00
oliverschmidt 01b9b31952 Moved wpcap*.[ch] from platform/minimal-net/net to cpu/native/net. 2007-04-01 20:39:05 +00:00
adamdunkels e6301c6221 Moved tapdev*.[ch] from platform/netsim/net and platform/minimal-net/net to cpu/native/net 2007-03-31 18:49:37 +00:00
adamdunkels c4300e8e8d Added #include that #defines NULL 2007-03-31 11:19:08 +00:00
adamdunkels 92e5e7a13c Removed clock_delay() 2007-03-29 23:43:59 +00:00
adamdunkels 7db75a8aa6 x86 elfloader 2007-03-28 20:27:13 +00:00
adamdunkels 7f4014ca4d Preliminary implementation of the rtimer architecture functions for the native CPU 2007-03-28 20:09:09 +00:00