Commit graph

1173 commits

Author SHA1 Message Date
Arngrimur Bjarnason b533a683c3 Changed makefile. Removed extra slash 2012-12-10 20:41:43 +01:00
Mariano Alvira f60a00b93e the contiki-maca process should wait for a poll event 2012-12-02 14:26:51 -05:00
Mariano Alvira b3bb3ff53d fix very incorrect insert_at_rx_head; the bugged version would make
the rest of the rx list dangling.

this is used to insert the ack packet needed by the upper layers in
the netstack.
2012-12-02 14:25:39 -05:00
Mariano Alvira f7d1d78ac9 disable pad keeper when using ADC pin; otherwise you'll see a 20k input
impedance.
2012-11-30 10:44:26 -05:00
Adam Dunkels db41a51ae6 Make gcc default LD, and allow override with LD_OVERRIDE 2012-11-21 19:46:31 +01:00
Ilya Dmitrichenko d0f18e5d04 Fixed LDFLAGS for cross-compiling of "native" 2012-11-21 18:09:29 +00:00
Ilya Dmitrichenko 092c69639c Enable native target for cross-compiling -
by now it would have worked if you set CC via
command line (e.g. `make CC=clang`, though it
wouldn't work when CC is set in the platform
makefile which includes `Makefile.native`.
2012-11-21 18:09:10 +00:00
Mariano Alvira 03ab3fe317 Newer and cleaner TARGET=econotag as well as robust mc13224v
configuration system.

(also deprecate TARGET=redbee-econotag)

- mc13224v now automatically probes hardware config for buck converter
and 32kHz crystal as well as automatically monitors battery voltage
and manages the buck accordingly.

- new flashed based config system for mc13224v parameters such has
  radio modes (demod, autoack), nvmtype, mac address, channel and
  power.

- considerably cleaned up econotag platform code (suffered from severe
  case of bit-rot)
2012-11-19 19:16:29 -05:00
Mariano Alvira 2c9a538582 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into bump-libmc1322x
bump libmc1322x to 7bee48243c

Conflicts:
	cpu/mc1322x/board/Makefile.board
	cpu/mc1322x/lib/include/uart.h
	cpu/mc1322x/lib/uart1.c
	cpu/mc1322x/lib/uart2.c
	cpu/mc1322x/src/default_lowlevel.c
2012-11-18 18:27:39 -05:00
Etienne Duble 7905316c54 Fix: stm32w flasher for Ubuntu 12.04 and later 2012-11-09 14:14:57 +01:00
Etienne Duble ecdbbaec9a Fix: handle stm32f-based serial interfaces (/dev/ttyACMx) 2012-11-09 14:00:16 +01:00
George Oikonomou 79cffa030f cc2531: USB CDC-ACM code style fixes
Closes #18
2012-11-01 17:42:04 +00:00
George Oikonomou 1a0f01ccc4 cc253x: Config to swap between UART and USB I/O
See Pull Request #18
2012-11-01 17:41:57 +00:00
Philippe Rétornaz eabaa0c8e4 cc253x: DMA Changes
- Fixed DMA irq flag clearing
- Added a dma_reset helper

See Pull Request #18
2012-11-01 17:41:49 +00:00
Philippe Rétornaz 898bd07810 cc253x: optionally push bits in p2 interrupt
See Pull Request #18
2012-11-01 17:41:46 +00:00
Philippe Rétornaz 0a6e65acdf cc2531: USB changes:
- usb cdc-acm:
  * implement get line coding
  * use printf only when debugging
  * Add events

- usb-core: do not force debugging

See Pull Request #18
2012-11-01 17:41:41 +00:00
George Oikonomou c1d72475d7 cc253x: Renamed P2 interrupt-related files for better consistency
See Pull Request #18
2012-11-01 17:41:38 +00:00
George Oikonomou c60f0b4349 cc253x: P2-related routines are now bankable
We keep the ISR in its own file and move everything else
to a different one, so that we only have to keep the ISR
in HOME

See Pull Request #18
2012-11-01 17:41:32 +00:00
George Oikonomou d9d4fa168d cc253x: Renamed the P2 ISR
This is mainly a naming convention thing, we want to have 'isr'
as part of the name, instead of 'int'. We also want port_2 instead
of p2 because we already had port_1

See Pull Request #18
2012-11-01 17:41:28 +00:00
George Oikonomou fea4970142 cc253x: Configurable linkage for the P2 ISR
See Pull Request #18
2012-11-01 17:41:24 +00:00
Philippe Rétornaz ba96408f37 cc253x: Add USB support to the compilation scripts
See Pull Request #18
2012-11-01 17:41:21 +00:00
Philippe Rétornaz d93fee612d cc2531: Add USB driver
See Pull Request #18
2012-11-01 17:41:17 +00:00
Philippe Rétornaz ddc8120d7c cc253x: Add p2 interrupt handler
The P2 Interrupt is shared across many periferal (I2C, USB, GPIO).
This adds a generic interrupt handler on which the differents drivers
can register a handler.

See Pull Request #18
2012-11-01 17:41:11 +00:00
Philippe Rétornaz dec34c21ef cc2531: change cdc-acm descriptor
Change to have a real usb VID/PID and better fit the capabilities
of the CC2531 hardware (enpoint size, location).

Compile only if the cdc-acm class is requested.

See Pull Request #18
2012-11-01 17:41:07 +00:00
Philippe Rétornaz 0e55eb0947 cc2531: Copy arm usb framework
See Pull Request #18
2012-11-01 17:40:35 +00:00
George Oikonomou 713c2e5974 DOS EOL and indentation fixes (core/ apps/ cpu/)
- Removed some DOS EOLs
- Changed some tabs to spaces
- Removed some trailing whitespaces

Part of Pull Request #6
2012-10-30 13:43:51 +00:00
Adam Dunkels 6c8fbd2dff Merge pull request #11 from adamdunkels/remove-rtl8019
Removed old unused RTL8019 code that had license issues
2012-10-29 08:43:59 -07:00
Adam Dunkels 1af22fa4fe Removed old unused RTL8019 code that had license issues 2012-10-29 16:08:09 +01:00
Mariano Alvira 4087c0785f remove -g
see http://comments.gmane.org/gmane.os.contiki.devel/13869
2012-10-29 10:34:28 -04:00
Adam Dunkels 944537fccf Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
Niclas Finne f5c8cff5b2 Made MT stack size configurable 2012-10-23 00:52:52 +02:00
George Oikonomou d84a97103f cc2x3x stack debugging macro fix 2012-09-20 15:12:02 +01:00
George Oikonomou fde1510653 Added definitions for cc2530 DMA-related SFR bits 2012-09-20 15:09:15 +01:00
George Oikonomou 3b0e92168b Copied cc2530 stack functions to the cc2430 port 2012-09-20 15:09:15 +01:00
George Oikonomou 95b9d4ee29 Sensinode/cc2430 stack depth optimisation
This replicates the method used by the cc2530 port
2012-09-20 15:09:15 +01:00
George Oikonomou cb168da729 Changed the cc2430 sleep_flag to uint8_t 2012-09-20 15:09:15 +01:00
George Oikonomou fa5a38666b Removed redundant #else blocks 2012-09-20 15:09:15 +01:00
George Oikonomou 88c6689e38 cc2430: Build with --fomit-frame-pointer 2012-09-20 15:09:15 +01:00
Niclas Finne 767e8bb551 Default value for _DATA20_HEAP_SIZE when using the IAR compiler on MSP430 platforms 2012-09-20 14:01:56 +02:00
Niclas Finne 4630945475 Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms 2012-09-19 22:49:19 +02:00
George Oikonomou ee7af77ca9 Reworked the cc2530 stack debugging facilities:
- Moved to their own file
  (so we can later copy the entire thing over to cc2430)
- Renamed the functions
  (for naming convention reasons)
- The entire thing can be enabled/disabled
- Added a couple more macros
- Hooked into main()
2012-09-07 17:40:17 +01:00
Philippe Rétornaz 9a63e8c027 cc253x: Add stack monitoring helpers 2012-09-07 17:32:54 +01:00
Philippe Rétornaz 48d99f15c8 cc253x: fix dma interrupt enable flag 2012-09-07 17:32:54 +01:00
George Oikonomou c6ec22c4c8 cc2530: Added a method to maximise stack depth
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
2012-09-07 17:32:53 +01:00
Philippe Rétornaz 666ff6ca55 cc253x: use a uint8_t for sleep_flag
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
2012-09-07 17:32:10 +01:00
Philippe Rétornaz 44bcabe89c cc253x: Change CFLAGS
This add -fomit-frame-pointer by default, it decrease sliglty the
stack usage when several function call are nested.
On some specific case 30 bytes could be saved on the stack.
2012-09-07 17:32:10 +01:00
George Oikonomou 8699f7741d Fixed typos and a stray printf. Adjusted comments 2012-09-07 17:31:25 +01:00
Ivan Delamer b43dad00b0 Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES
#defines.
2012-09-04 11:12:18 -06:00
Ivan Delamer 2e72ec3594 Place ATmega1281 define in correct section (it does have compare C
unit, avoid duplicate define and compiler warning).
2012-09-01 15:22:13 -06:00
Ivan Delamer 5636357243 Fix RF230 transition: RX_AACK_ON -> TX_ARET_ON (go through PLL_ON,
as per datasheet). Tested on RF230 and 128RFA1 (RF231).
2012-09-01 15:20:00 -06:00
George Oikonomou 26a87ee9cb Improved handling of cc2x3x rf_flags 2012-07-11 10:53:14 +01:00
George Oikonomou 43f2790357 Added channel_get() to the cc2x3x RF drivers 2012-07-11 10:53:14 +01:00
George Oikonomou d66241fd97 Bugfixed the cc2530 LOW_POWER_RX configuration
Report and fix by Tom Xiao
2012-07-11 10:53:14 +01:00
George Oikonomou 62fbd389d8 Renamed a cc253x SFRX to stop namespace conflicts
The TR0 SFRX can not use the name TR0 because it
conflicts with TCON.TR0 on the default 8051.

See SDCC bug 3513300
2012-07-11 10:53:14 +01:00
George Oikonomou 4b73b48f60 Fixed the cc2530 RSSI adjustment 2012-07-11 10:53:14 +01:00
Ivan Delamer 17a62a649c ATmega128RFA1 bug fix: no interrupt pin used (embedded radio).
Enabling interrupt caused MCU reset if using pin as GPIO.
2012-07-10 14:36:47 -06:00
Niclas Finne 418a5772e6 Removed leds debug output 2012-06-07 10:35:22 +02:00
George Oikonomou 47db065034 Bugfixed the cc253x UART0 init (Thanks, Deng Jian)
The flush instruction was resetting the stop bit level to 'low'
2012-06-06 15:25:57 +01:00
David Kopf e9a55cc222 Enable check on received length to prevent buffer overflow. Thank you Cooja! 2012-05-28 13:02:23 -04:00
George Oikonomou 259b497122 Minor Sensinode build cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou 1f7171f943 Adjust cc2x3x ports to the new clock API 2012-05-16 15:22:31 +01:00
George Oikonomou 0d4b90c42b cc2530 watchdog improvements and cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou 274a5ebb9c Fixed a typo which was preventing the cc253x watchdog from starting 2012-05-16 15:22:30 +01:00
Laurent Deru 56914963ef Reactivate flash protection after maca init 2012-05-09 10:24:38 -04:00
Mariano Alvira a4813d815f use --gc-sections instead of -gc-sections 2012-05-06 12:19:20 -04:00
Mariano Alvira 4acad929f0 add gc-sections, roughly 4kB savings. 2012-05-06 09:24:06 -04:00
David Kopf d6dc216e02 Reorder includes to prefer platform routines. Remove redundant RPL define. 2012-04-27 16:54:09 -04:00
George Oikonomou dd26accc07 We can now use SDCC's __nonbanked feature
This allows us to reduce CODE footprint of SDCC projects
built with --model-huge. Use carefully!

* Added a facility which allows us to enable/disable the
  feature from the CPU dir (CC_CONF_NON_BANKED_OPTIMIZATION)
* Added the CC_NON_BANKED keyword to some platform files
  (expands to __nonbanked)
* Started using this for some examples
2012-04-26 15:28:43 +01:00
Adam Dunkels b85bc3379c Bugfix in clock_wait() declaration. Various style fixes. 2012-04-22 20:54:29 +02:00
George Oikonomou e95f94a9a8 Added support for reading MAC from the cc253x flash
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
2012-04-20 16:03:38 +01:00
George Oikonomou 29090a3dda The cc253x Makefile specifies SoC flavor
This will help us slowly add better support for smaller SoCs
instead of just assuming that all cc253x SoCs are F256

- We build for F256 by default but the project Makefile can override this
- We currently ignore this when passing --code-size. This is a ToDo
- The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant
2012-04-20 16:03:38 +01:00
George Oikonomou 6fb48174ba Fixed a documentation typo 2012-04-20 16:03:37 +01:00
Niclas Finne 1b13b69814 Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611 2012-04-10 16:05:10 +02:00
Niclas Finne 57a166c3db Corrected compiler flags for the IAR compiler 2012-04-10 15:27:44 +02:00
David Kopf cac4e9a222 Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t.
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
2012-04-09 15:49:53 -04:00
David Kopf 40bd020394 Fix wrong register addresses. 2012-04-09 09:58:12 -04:00
George Oikonomou 57969259ce cc2x3x clock_delay(len) now delays for approx. len usecs 2012-04-03 16:26:11 +01:00
George Oikonomou 3cb26adeda Added an ASM(foo) macro for cc243x 2012-04-03 16:26:11 +01:00
George Oikonomou 242e02658f The cc2530 UART driver was sending a 0 down the line on init 2012-04-03 16:26:10 +01:00
George Oikonomou b3de052e01 Ported the stack-friendly clock ISR code over from cc243x to cc253x 2012-04-03 16:26:10 +01:00
George Oikonomou 11a7f644ac Comment rewording and formatting 2012-04-03 16:26:10 +01:00
George Oikonomou ce17fa131c Stack-friendly cc243x clock ISR enabled by default
This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate
as originally thought. In fact, it has pretty much the same
accuracy as the old, stack-hungry version.

* Renamed the define from CLOCK_CONF_ACCURATE (1: old) to
  CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying
  that one is more accurate than the other.
* Using CLOCK_CONF_STACK_FRIENDLY by default.
2012-04-03 16:26:10 +01:00
George Oikonomou 924fe934c1 Deleted obsolete macros. Minor formatting 2012-04-03 16:26:10 +01:00
George Oikonomou ffa3a1c4c3 cc2x3x clock driver cleanup
* Bit-Addressable SFRs are now accessed as such,
  instead of (N)OR-ing the byte
* A routine was declared as CCIF but not defined as such. Fixed
* Deleted a leftover duplicate define
* Formatting
* Comment updates and clarifications
2012-04-03 16:26:10 +01:00
simonduq 930c7c25bc fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file,
more printouts in main when ipv6 is used, and a target for memory
profiling taking stm's gnu.ld static stack size into account
2012-04-03 11:47:30 +02:00
George Oikonomou 5240519dd9 Renamed a config define to better match contiki's naming philosophy 2012-04-02 11:38:54 +01:00
George Oikonomou bce34e4b9a For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir.
The value is not really configurable by the platform so having it
in contiki-conf.h didn't make huge sense.
2012-04-02 11:22:19 +01:00
George Oikonomou d958ee3125 Deleted the old Sensinode 'read mac from flash' routine.
Since the introduction of a purpose-written routine, the old
generic one (which was written in asm) was never being used.
There was a configuration directive which allowed us to switch
between the two. All references to this configuration directive
have also been removed.
2012-04-02 11:21:32 +01:00
George Oikonomou 5d8f63a61b We've not been using the cc2430 converter for a while now 2012-04-02 11:03:49 +01:00
George Oikonomou 7854ee499a Wrapped cc2x30 SOFT_RESET() macro inside do {...} while(0) 2012-03-29 13:11:04 +01:00
George Oikonomou 5afdd19403 Adjusted check to determine if we are being built with SDCC
Since rev #7342, SDCC defines __SDCC_mcs51 instead of SDCC_mcs51.
We check for either
2012-03-29 13:10:25 +01:00
George Oikonomou 4f1e251603 Some uN_t had crept back in cc2530dk and sensinode.
Changed to uintN_t plus a bit of code formatting
2012-03-29 13:10:10 +01:00
simonduq 946f00bf7b stm32w: added ability to upload and reset all connected boards, and login using MOTE=x 2012-03-26 23:00:44 +02:00
simonduq 95ae5c5d51 avoid unnecessary symbols.c/h copying 2012-03-26 23:00:43 +02:00
George Oikonomou ad256e5014 New platform: TI cc2530 Development Kit
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00
George Oikonomou b7674c3636 Reincarnate the sensinode/cc2430 port 2012-03-23 14:41:07 +00:00
simonduq e4fb360262 stm32w platforms: contikimac support in the Rime case, with EUI-64 2012-03-20 17:30:59 +01:00
simonduq 5da4463236 adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La) 2012-03-20 17:29:58 +01:00
Niclas Finne ff7a977dc7 Improved support for the IAR compiler for the MSP430 platforms 2012-03-07 23:09:05 +01:00
Niclas Finne 684c3edfa6 Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood. 2012-03-07 23:04:52 +01:00
Niclas Finne 2eee14a1d8 Allow compiler flag SMALL to be set to disable SMALL-build. Patch by Andre Frimberger. 2012-03-06 15:35:20 +01:00
Ilya Dmitrichenko 49cd7878e3 Avoid deprecated error on Darwin. 2012-03-02 15:15:47 -05:00
Ilya Dmitrichenko 499d3052ee Fixed TARGET=native compilation issues on Darwin. 2012-03-02 15:15:42 -05:00
David Kopf 2b7ecefce7 Remove unused SPI initializer flag from AVR. Comment out in the msp-430 template. 2012-02-27 17:05:22 -05:00
Ilya Dmitrichenko 9c99d46e24 Simplified host OS platform detection in Makefiles 2012-02-25 10:09:33 -05:00
David Kopf deb75d3d97 Several bugfixes 2012-02-21 11:14:52 -05:00
David Kopf 59e459e0e9 Add missing mtarch_stop function 2012-02-21 11:11:53 -05:00
David Kopf 6e45dfe5ff PROGMEM changes needed for newer avr-gcc compiler 2012-02-21 11:10:57 -05:00
Nicholas J Humfrey 1cda3da17e Converted u8_t to uint8_t and u16_t to uint16_t in the cpu directory. 2012-02-21 08:33:24 -05:00
Mariano Alvira 68591919e6 mc1322x: add -MMD to Makefile.mc1322x to correctly create dependencies 2012-02-16 11:17:15 -05:00
Mariano Alvira 43062b6d74 mc1322x: change how board.h works to allow default board.h (defaults
to econotag)
2012-02-13 10:01:36 -05:00
Mariano Alvira ee8f2c669e mc1322x: remove symbols.{c,h} 2012-02-13 10:01:36 -05:00
David Kopf 9d6542d49b Fix minimal-net webserver6, broken after native border router changes. 2012-02-11 15:03:24 -05:00
David Kopf 38267bfd5a Webserver-nano: Add page load times, remove workaround code for bug in arm strformat.c, correct the double count of leading zeros there. 2012-02-11 14:58:35 -05:00
David Kopf 987906be97 rf230bb updates: involves setting the 801.15.4 pending bit,
0x800000 cpu clock, and a jtag reset bugfix
2012-02-01 14:16:39 -07:00
Ivan Delamer 57e686179c Improved rf230bb.c synchronization/locking. Removed unnecessary locks
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
2012-02-01 13:37:45 -07:00
David Kopf 7ca141b457 Access uart registers directly instead of through intermediate addresses in a RAM struct.
Add a platform define to reduce the number of ports supported by the cpu.
2012-01-21 13:49:58 -05:00
Niclas Finne f26920ae9b Define the BV macro if not already defined 2012-01-11 08:46:16 +01:00
David Kopf 58298f59db Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
2012-01-10 12:42:27 -05:00
Niclas Finne f3db12c19d MSP430 setup for f2xxx based on Z1 2012-01-09 14:56:03 +01:00
Niclas Finne 9ffcd53868 Fixed compiler warning (with IAR compiler) 2012-01-09 14:56:00 +01:00
Niclas Finne 3daa822f89 Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc) 2012-01-09 14:55:57 +01:00
Niclas Finne fd81a0d393 Minor cleanup (avoid setting some compiler flags twice) 2012-01-09 14:55:54 +01:00
Niclas Finne 8e1e12dfd3 Ignore SMALL when using IAR compiler 2012-01-09 14:55:48 +01:00
Nicolas Tsiftes eba64bdc5e Be more explicit with the relationship between inheritance between MSP430 families. 2012-01-09 14:55:45 +01:00
Niclas Finne cdfa8708e3 * Added f2xxx for two series (for example z1)
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
2012-01-09 14:54:57 +01:00
Niclas Finne f4f84ffca4 Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X 2012-01-09 14:54:01 +01:00
Niclas Finne 09082f02fe Changed clock_delay to use the nop instruction 2012-01-09 14:49:39 +01:00
Niclas Finne cd4be4927a Fixed quick dco sync to also work with mspgcc 2012-01-09 14:41:42 +01:00
Niclas Finne 708f9d77d2 Corrected timing for higher CPU speed 2012-01-09 14:41:36 +01:00
Niclas Finne 05b10eb9ce Initial WiSMote port based on code from Arago Systems. 2012-01-09 12:25:06 +01:00
Niclas Finne 367c82a5ab added compiler flags and macros for IAR and mspgcc 4.4.5 compilers 2012-01-09 12:24:33 +01:00
David Kopf b251619a2f Add wpcap for cygwin/Windows native border router 2012-01-08 13:37:56 -05:00
Fredrik Osterlind 2644057fb2 using dma by default 2011-12-21 10:53:18 +01:00
David Kopf 81af871db9 Bugfix: use 16 bit tick count to adjust clock after sleep 2011-12-01 09:58:55 -05:00
Oliver Schmidt e38f008b9b The dependency on the ucontext functions has the potential to keep others from successfully using cpu/native for other platforms. As the Contiki multithreading library typically isn't used at all it's not worth the trouble. So we just limit it to Windows and Linux - where it is known to not only build but actually work. If someone needs the Contiki cpu/native multithreading library on another platform he's certainly welcome to add that platform - hopefully by just activating the codepath that we now made exclusive for Linux for his platform. 2011-11-30 23:41:39 +01:00
David Kopf fb977cb9ef Better fix for hardware FCS error on JTAG reset
Correct silly error introduced by trying to save two bytes.
2011-11-15 13:24:58 -05:00
David Kopf 31ba84eb75 Improve rf23x cca procesing
Fix delay_loop timing bug by using long long calculation.
128rfa1 and rf230 both working with contikimac RDC
2011-11-14 11:49:58 -05:00
David Kopf d1cd3f213c Add general unsupported interrupt vector suggested by Daniel Willmann 2011-11-14 11:36:18 -05:00
David Kopf 6eba721af1 Add rtimer_arch_sleep function, enabled with RDC_CONF_MCU_SLEEP 2011-11-14 11:10:35 -05:00
David Kopf c2364897f8 atmega128rfa1 cca fixes, energest and rimestat macros.
Add option to return ACK to RDC layer when in extended mode, based on Georg von Zengen code.
2011-11-08 12:20:22 -05:00
Niclas Finne bf299b1a07 Fixed splhigh/splx for the IAR compiler 2011-09-27 22:51:28 +02:00
Joakim Eriksson 5b1d9617c4 moved io and signal and IAR-GCC checks from driver files into contiki include file 2011-09-26 10:38:41 +02:00
Joakim Eriksson 95dde73618 fixed Sky platform for IAR compiler 2011-09-11 17:18:02 +02:00
David Kopf f721f646fa Adjust sleep time by ticks instead of seconds, proposed by Ivan Delamer 2011-09-10 12:44:49 -04:00
Adam Dunkels 4fd8133aa3 Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE) 2011-09-05 20:42:19 +02:00
Mariano Alvira 43910c1be7 don't worry about wraparound in rtimer_arch_schedule 2011-09-02 12:36:10 -04:00
Mariano Alvira 6c0bbc492b change mc1322x rtimers to 32-bit
hardcode a close default value for the RTC
2011-09-02 12:32:47 -04:00
David Kopf dfdae5b02b This fixes commit 9a1ce7 for spaces instead of .... 2011-08-31 12:08:01 -04:00
David Kopf 470887eddd Print elf size if ELF_SIZE is defined 2011-08-31 11:50:14 -04:00
David Kopf 9a1ce7cf75 Use enumerated tx return values 2011-08-31 11:40:23 -04:00
David Kopf 5f2b2074f0 Implement WITH_RPL option in makefile 2011-08-28 16:11:48 -04:00
David Kopf bdec65b889 Fix typos and file endings 2011-08-28 16:04:36 -04:00
David Kopf 94fc40f736 Move LEDONPORTE1 define to contiki-conf.h, fixing typo. 2011-08-24 11:35:58 -04:00
David Kopf 09db159876 128rfa1 cca fix, NETSTACK_RADIO.off now returns 0/1 if radio off/on 2011-08-18 14:36:04 -04:00
David Kopf 53737d9a38 Use correct prescale factor 2011-08-18 13:58:20 -04:00
David Kopf 3ea102050b Apply patch of Ivan Delamer for atmega1281 @ 4 MHz 2011-08-17 13:16:46 -04:00
David Kopf 36fa735323 Calculate best prescaler based on F_CPU and CLOCK_CONF_SECONDS. Inspired by patch from Ivan Delamer. 2011-08-17 13:15:26 -04:00
maniacbug 0990896f54 Added an .eu target to upload only the eeprom for AVR cpu. 2011-08-16 14:10:48 -04:00
maniacbug 8f0bb86c02 No strict aliasing for AVR
AVR build generates numerous aliasing errors.  This -f switch silences them.
2011-08-16 14:07:06 -04:00
David Kopf 577215deca Use 128rfa1 interrupts instead of timing.
Generalize DEBUGFLOW macro for use in multiple routines.
2011-08-15 15:06:38 -04:00
David Kopf 50d1086553 Add changes needed for contikimac 2011-08-13 11:38:38 -04:00
David Kopf 03ab525652 Option for nested rtimer interrupts 2011-08-13 11:35:03 -04:00
David Kopf cdcb2c4744 CCA measurement was always returning busy 2011-08-06 13:48:52 -04:00
David Kopf b70d2b3163 Remove duplicate code block 2011-08-05 17:34:38 -04:00
David Kopf c9b19ce655 Change timer setups for arbitrary CLOCK_CONF_SECOND
Change raven to 128 ticks and enable 32KHz crystal as default.
2011-08-05 15:14:35 -04:00
David Kopf e2ad2acde4 Add stk500 platform and changes suggested by Daniel Willmann 2011-08-03 11:18:55 -04:00
David Kopf 6ec85fe079 Add Iris port of Shinta Hatatani 2011-08-03 10:17:59 -04:00
Mariano Alvira 2b9f4e8fed Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x 2011-08-01 19:50:46 -04:00
David Kopf cf3241c5db Add file needed for rpl border router 2011-07-24 12:07:39 -04:00
David Kopf 0bb585fd60 Replace WEBSERVER by AVR_WEBSERVER 2011-07-24 11:43:17 -04:00
Simon Berg 506eced1bc Bug fix by Jonathan Chung 2011-07-22 15:07:52 +02:00
Mariano Alvira 485d6716e0 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x
Conflicts:
	cpu/mc1322x/src/default_lowlevel.c
2011-07-18 07:25:19 -04:00
HATATANI Shinta f4740a062a IRIS port is working with uIPv6 2011-07-15 16:36:25 +09:00
Mariano Alvira 758fc37307 mc1322x: flush the rx fifos when full 2011-07-12 07:05:04 -04:00
Mariano Alvira 4cf9514aa9 fix gpio initialization for uart2 2011-07-09 14:33:03 -04:00
Mariano Alvira 6d96721ac4 mc1322x: block in uart putc if the TX buffer is full. Can also be
configured to drop chars instead with UARTx_DROP_CHARS
2011-07-09 12:46:30 -04:00
Mariano Alvira e80f9eb4b5 mc1322x: build fixes for uart2 2011-07-08 19:40:42 -04:00
Mariano Alvira e2d74fa0a5 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into uart-upstream
Conflicts:
	cpu/mc1322x/lib/include/uart.h
	cpu/mc1322x/src/default_lowlevel.c
2011-07-08 19:21:15 -04:00
David Kopf 6ea7250af7 Change ctimer startup order, add multihop to wpcap and minimal-net platform. 2011-06-30 12:12:07 -04:00
David Kopf c48b7ab78d Add RPL nodes and border router to minimal-net platform (cygwin only) 2011-06-28 08:19:48 -04:00
David Kopf 6b434a553f Implement SRAM routine of Georg von Zengen 2011-06-21 13:03:58 -04:00
Joakim Eriksson af601dfb23 improved support for IAR compiler for z1 2011-06-05 00:21:47 +02:00
Mariano Alvira 33b32c61e9 Only insert an ack packet if the ack request bit is set 2011-06-01 13:47:05 -04:00
Joakim Eriksson 77ec0bfa0f fixed the z1 platform and generic code used by z1 to work with IAR compiler 2011-05-25 17:21:51 +02:00
Mariano Alvira 724bcbd2d3 Merge remote branch 'libmc1322x/master'
Conflicts:
	cpu/mc1322x/src/default_lowlevel.c
2011-05-14 21:19:47 -04:00
Joakim Eriksson fd75050c67 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-05-13 11:53:45 +02:00
Joakim Eriksson 2c16538e6a fixed support for IAR compiler 2011-05-13 11:52:42 +02:00
Salvatore Pitrulli 7a48110067 STM32W flasher utilities for Linux and Windows merged into a single folder. 2011-05-10 19:26:33 +02:00
Mariano Alvira 0a2b86456b add option to insert an ack packet on autoack 2011-05-08 09:50:57 -04:00
Mariano Alvira 65671c66c6 turn on insert ack packet by default 2011-05-08 09:50:57 -04:00
Joakim Eriksson 3fa8da5ddf fixed IAR compilation paths 2011-05-02 15:19:28 +02:00
Salvatore Pitrulli 5eabf33211 Added functions for deep sleep to mbxxx platform. 2011-04-27 18:12:23 +02:00
Mariano Alvira d80449244d Merge remote branch 'libmc1322x/master' 2011-04-20 21:23:47 -04:00
Salvatore Pitrulli 01a7a78a94 Fixed temperature ADC conversion bug on mbxxx.
The conversion was made from an incorrect source when
the GPIO pin was not PB7.
Added functions and macros used to select the correct
ADC channel.
2011-04-20 18:06:20 +02:00
Salvatore Pitrulli aa968309af Merge remote branch 'sf/master' 2011-04-16 16:27:10 +02:00
Niclas Finne 813489633c Added missing include 2011-04-15 15:49:43 +02:00
Salvatore Pitrulli 4ff82b76e5 Removed -fsigned-char GCC compiler options. 2011-04-14 08:12:11 +02:00
Salvatore Pitrulli 0105057c44 Removed unwanted file. 2011-04-14 08:10:58 +02:00
Salvatore Pitrulli 0a0ad39c9b Added weak symbols for STM32W exception handlers and other minor updates for the HAL. 2011-04-14 08:06:13 +02:00
Salvatore Pitrulli 57163c616d Removed some warnings. 2011-04-14 08:05:21 +02:00
Salvatore Pitrulli af8e58e063 Set LED pins to output when MB851 is in sleep mode.
This reduces power consumption.
2011-04-13 18:14:12 +02:00
dak664 2e14df3981 Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6. 2011-04-08 15:15:16 -04:00
Salvatore Pitrulli 6655c876f2 Added functions and example for deep sleep on mb851.
The added function let a process to make the system go
into deep sleep for maximum power saving.
The udp-ipv6-example shows how to use these new functions.
2011-04-08 11:53:48 +00:00
dak664 89741bd322 Exit on watchdog reboot call 2011-04-07 17:47:54 -04:00
dak664 581d081ffe Don't use RF230_CONF_CCA_THRES if it is not defined. 2011-04-07 17:44:10 -04:00
Joakim Eriksson f603c965c1 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-04-06 20:15:44 +02:00
Joakim Eriksson 928bf6b6c1 fixed cpu/msp430 for compilation with IAR compiler 2011-04-06 20:08:48 +02:00
Mariano Alvira 4f4e06c71b Merge remote branch 'libmc1322x/master' 2011-04-06 05:56:06 -04:00
Oliver Schmidt 5da4faf71e Allow VC++ to be used as alternative to GCC for building in the WIN32 target.
TODOs:
- Update README
- Add dependency handling
- Add rtimersupport
2011-04-03 22:32:11 +02:00
Oliver Schmidt f83fb3704b Replaced make-empty-symbols with empty-symbols.[c|h]
The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.
2011-04-03 13:24:58 +02:00
dak664 a9cbbb4570 Add sneezer mode and tx power change 2011-03-23 18:08:07 -04:00
Mariano Alvira 11f5bca7c4 Merge remote branch 'libmc1322x/master'
Conflicts:
	cpu/mc1322x/board/redbee-econotag.h
2011-03-22 16:28:08 -04:00
Salvatore Pitrulli eb588f1aec New HAL and SimpleMAC for STM32W108. 2011-03-22 19:35:49 +01:00
dak664 5dd7500d0b Add configurable auto cca threshold and implement driver cca call.
Show smallest rssi in jackdaw menu.
2011-03-21 11:10:30 -04:00
dak664 d9b5bac953 Refactor with WATCHDOG_CONF_TIMEOUT 2011-03-14 16:14:47 -04:00
Mariano Alvira 74517b9df4 Merge remote branch 'libmc1322x/master' 2011-03-13 17:14:32 -04:00
dak664 59109b9893 Fix type, diagnostic interrupt code on conditional 2011-03-13 14:08:02 -04:00
dak664 a210e14d78 Add defines for watchdog configuration. 2011-03-13 13:45:12 -04:00
dak664 0b2d3d1615 Refactor clock code with optional interrupt optimizing.
Put periodic radio calibration on conditional.
2011-03-13 13:07:32 -04:00
dak664 0573ecd62f Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-03-11 16:51:10 -05:00
dak664 bf5be5056f Testing $OS works with cygwin and DOS command windows 2011-03-11 16:50:35 -05:00
Mariano Alvira f2b92cfa98 mc1322x: remove bad rule from cpu Makfile 2011-03-11 16:32:25 -05:00
Mariano Alvira 59d7fad746 Merge remote branch 'libmc1322x/master' 2011-03-11 16:28:14 -05:00
dak664 6a5c8ff1c4 Include file needed for slip rpl-border-router build 2011-03-11 14:10:30 -05:00
Mariano Alvira a1ae79307b mc1322x: remove auto reception mode as it appears to be the cause of
the periodic autoack checksum errors. removing auto mode doesn't seem
to create any performance issue.
2011-03-11 06:28:47 -05:00
dak664 bb574fd1e2 Don't create an object directory if target does not exist 2011-03-10 14:59:21 -05:00
Mariano Alvira 5208aa14ea mc1322x: remove auto reception mode as it appears to be the cause of
the periodic autoack checksum errors. removing auto mode doesn't seem
to create any performance issue.
2011-03-08 15:36:53 -05:00
dak664 de7bcda99f avrdude and makefile changes suggested by Georg von Zengen 2011-03-08 13:07:00 -05:00
Mariano Alvira fa08b09770 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into update-lib 2011-03-07 12:37:26 -05:00
Mariano Alvira 2c79ab4962 mc1322x: increase the heap to 4K 2011-03-05 16:52:35 -05:00
Mariano Alvira befbd4a479 mc1322x: handle board file differently if cygwin 2011-03-04 16:54:59 -05:00
Fredrik Osterlind dd7cec737d removed obsolete leds_[color]() functions, replaced by leds_{on,off}()
allow LEDS_[COLOR] to be configured by platform-conf
2011-03-03 17:48:32 +01:00
Mariano Alvira f0c27340c6 mc1322x: increase the HEAP to 2048 bytes: needed for COAP server. 2011-02-25 16:10:08 -05:00
Mariano Alvira bea643bc4a mc1322x: flush the radio rx queue in the receive process 2011-02-23 15:19:45 -08:00
Mariano Alvira c12ab0d484 mc1322x: get the tx status for a packet and return the proper response. 2011-02-23 15:19:44 -08:00
Mariano Alvira 535b9d35d7 mc1322x: disable broken maca calls for now.
maca_on, maca_off, and contiki_maca_init don't work correctly;
they mess up address filtering.

disable them for now and fix them later.
2011-02-23 15:19:44 -08:00
dak664 46297de770 Allocate variable only when mass storage is enabled 2011-02-23 14:06:06 -05:00
Mariano Alvira c857e57d2f msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h 2011-02-21 09:23:52 -08:00
Mariano Alvira 8f9cf50e55 set timestamp packet attribute 2011-02-18 12:46:34 -05:00
Mariano Alvira a86a0fbe0e set lqi packet attribute 2011-02-18 12:46:10 -05:00
Mariano Alvira 07f77b02eb Merge remote branch 'libmc1322x/master' 2011-02-18 12:38:30 -05:00
Mariano Alvira 2e331b51e8 Merge remote branch 'libmc1322x/master' into update-libmc1322x
Conflicts:
	cpu/mc1322x/COPYING
2011-02-17 14:41:47 -05:00
Mariano Alvira 2e33e1694a Merge branch 'libmc13-9f82e068' into update-libmc1322x 2011-02-17 14:39:20 -05:00
Mariano Alvira 7cdfbb0947 remove cvs keywords from cpu/mc1322x 2011-02-17 14:36:55 -05:00
Mariano Alvira bfb471c782 add proper arm flags and remove Makefile.src as it's not used. 2011-02-08 09:55:50 -05:00
Mariano Alvira b1dd3fc063 use the CS toolchain by default:
http://www.codesourcery.com/sgpp/lite/arm/portal/release642
2011-02-08 09:55:23 -05:00
Mariano Alvira 81552d1f6d add a tutorial for rest-example 2011-02-08 09:08:05 -05:00
Mariano Alvira 5c3ef556d9 add a dummy io.h for mc13224v 2011-02-08 09:07:54 -05:00
Mariano Alvira f5ba70cd20 add heap and _sbrk to mc13224v 2011-02-08 09:07:23 -05:00
Mariano Alvira 9572baa71b fix mc13224v led driver to only touch gpio used for leds. 2011-02-08 09:07:11 -05:00
dak664 5c098993df Add initial file 2011-02-07 20:30:47 -05:00
dak664 b41e8f384e Add initial atmega128rfa1 file 2011-02-07 20:28:17 -05:00
dak664 f1f32c8e6a Add combined MCU and radio ATmega128rfa1 2011-02-07 13:46:34 -05:00
Mariano Alvira 2a75a4a5df this fixes a major problem with the maca_process
Before it didn't do process_poll like it should and would add events
out of turn and mess up the event processor --- that would cause the
button to stop working after the unhandled events exceeded a max
number

this fixes maca_process to do a process_poll as it should. now the
button works fine and so does the radio.
2011-02-03 18:09:51 -05:00
oliverschmidt 8c87f85a1d Made cc65 build compatible with make.exe from GnuWin32 and cmd.exe. We just live without the phony targets when building with cmd.exe - the next cc65 release will make the whole sed thingy obsolete anyway :-) 2011-01-23 16:30:30 +00:00
joxe 801a7e1149 fixed bug with uart DMA 2011-01-19 20:44:20 +00:00
salvopitru 5fcae86be3 Now it is putchar that has to be redefined (instead of __io_putchar), like other platforms. 2011-01-19 09:13:06 +00:00
adamdunkels 8f283b3989 Bugfix 2011-01-19 07:30:31 +00:00
adamdunkels 6f076dbe1a A set of compiler options that reduce the size of the final code size and RAM usage with ~10%. Courtesy of Simon Duquennoy. 2011-01-19 07:24:37 +00:00
maralvira 68180c0574 use network 230 --- 802.15.4 no-FCS 2011-01-18 16:58:18 +00:00
adamdunkels bb2e3b25bd Larger default DMA tx buffer size, to allow SLIP operation. Warn if DMA is enabled, since MSPsim does not yet support it. 2011-01-18 16:07:16 +00:00
maralvira ce92a90e58 new timer setup routines. 2011-01-17 15:51:19 +00:00
maralvira b3c8c14b7d add timer setup routines 2011-01-17 15:51:02 +00:00
maralvira ca098db611 fix a race condition regarding advancement of the softclock. Without
this, the advancment would fail to trigger a tx cycle
occasionally. This would cause the packet to get deferred until the
next expiration of the softclock.
2011-01-17 15:49:17 +00:00
maralvira 40bb4b80dc whitespace fixup to sync with libmc1322x 2011-01-17 15:48:39 +00:00
maralvira 6fb75263f9 fix parsing and pcap generation for packets with multiple output lines
(those that are > 16 bytes).
2011-01-17 15:47:23 +00:00
maralvira d82b004154 fix parsing and pcap generation for packets with multiple output lines
(those that are > 16 bytes).
2011-01-17 15:47:08 +00:00
maralvira d0227afbed cycle channel on keypress. 2011-01-17 15:46:27 +00:00
maralvira c78e1e345e add stdint.h 2011-01-17 15:45:02 +00:00
maralvira 0445a4f78f add cmdline options to set the intercharacter delays. 2011-01-17 15:44:18 +00:00
maralvira fb8c08ca7c only use these stubs with linux toolchains 2011-01-17 15:42:24 +00:00
salvopitru 9aa734936f RANDOM_MAX changed to RANDOM_RAND_MAX. 2011-01-17 10:08:14 +00:00
salvopitru fb75503624 'BTM' can be defined to flash devices already in bootloader mode.
COFFEE_FILES changed to COFFEE.
2011-01-17 09:41:47 +00:00
salvopitru a9b1b37bec Added definition of BAUD2UBR macro. 2011-01-17 09:22:24 +00:00
adamdunkels f002563e60 Tx on interrupts occasionally misses characters on output. Therefore we turn it off by default. 2011-01-09 20:44:14 +00:00
ksb eb24078ffb Converted CRLF line endings to LF 2011-01-05 17:16:42 +00:00
joxe 5b7b3da99c minor fixes of DMA uart code 2011-01-05 13:36:38 +00:00
joxe 565fda47aa added initial uart1 DMA rx support and required LPM requirements api 2011-01-05 12:02:01 +00:00
dak664 90a6d768ea Keep track of sleeptime and display on status web page. 2010-12-23 19:41:07 +00:00
dak664 662b0e064c Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes. 2010-12-22 22:49:16 +00:00
dak664 95982b40ba $make will show avr-size once and only once whether or not a build needs to occur. 2010-12-22 21:13:09 +00:00
dak664 5b8e62ef4f Patches from R Larsson 2010-12-22 20:10:00 +00:00
dak664 013c3ac2f8 Remove contitional on clock updating, it should always be done after a sleep! 2010-12-22 17:09:03 +00:00
dak664 44a2e34005 Resolve TIMER2 conflict between sleep and possible clock usage. 2010-12-22 16:50:30 +00:00
dak664 e3e1e04948 Add FCS comments and text2pcap dump routines of Roger Larsson.
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664 e4b0b3dc8c Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will. 2010-12-18 20:51:11 +00:00
dak664 5623ad827b Enable radio off and sleep modes. 2010-12-18 20:49:00 +00:00
adamdunkels f370b217a5 Turned up the rtimer resolution to 32678 Hz. 2010-12-16 22:50:21 +00:00
adamdunkels 1d090ea0f5 Made configuration of CC2420 SFD timestamps easier 2010-12-16 22:49:33 +00:00
adamdunkels c0fedd7661 Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module 2010-12-16 22:49:12 +00:00
dak664 570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664 aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
salvopitru d0db3fc39a Added a check for Coffee start address. 2010-12-15 15:01:00 +00:00
dak664 1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
salvopitru 5fe80dd99d Added elfloader machine dependent code for STM32W. 2010-12-15 11:10:20 +00:00
dak664 c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664 9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664 35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664 58b7a19803 Hardware/software radio HAL patch from Roger Larsson.
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664 21b10e8021 Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schfer 2010-12-03 18:16:56 +00:00
dak664 0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions.
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
nifi 7110afdad5 added missing include 2010-11-27 15:27:20 +00:00
dak664 dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
adamdunkels 149f4e8d21 Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers 2010-11-25 09:22:56 +00:00
dak664 880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
adamdunkels 4fac3037e0 Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash. 2010-11-15 21:52:54 +00:00
dak664 69ef9d57eb sizeof(*) is sizeof first array element 2010-11-12 17:24:36 +00:00
dak664 9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
nifi 5de83c9085 Only include code for stack printouts when needed 2010-11-12 15:54:41 +00:00
maralvira 3426eae031 fix typos 2010-11-11 20:37:33 +00:00
maralvira 9b2a2bb5e6 fix up stdint include 2010-11-10 22:12:29 +00:00
maralvira 6da84819dd use stdint.h instead of custom types.h
stdint.h is more portable across compilers
2010-11-10 22:06:28 +00:00
maralvira e229022f38 include crm.h 2010-11-10 21:58:12 +00:00
salvopitru 28e1445a0f Added a simple implementation of Coffee for STM32W108. 2010-11-10 11:20:44 +00:00
maralvira dfbc81158b Allow CROSS to be overridden with CROSS or CROSS_COMPILE 2010-11-09 13:13:45 +00:00
maralvira 1aac14f252 add tutorial explaining how to set up an RPL network of econotags 2010-11-09 01:30:01 +00:00
maralvira 3b515587c5 change how prepare and transmit work --- Contiki expects to call
prepare once and then transmit many times to repeat the same packet
over and over. This didn't work like that, but now it does.
2010-11-07 20:07:42 +00:00
maralvira e029fa8da0 fix defines for raw mode 2010-11-07 18:34:52 +00:00
maralvira 4664151419 fix build errors with start.S 2010-11-07 15:19:45 +00:00
maralvira 29333232d5 add section .start and undef _start so that _start is placed by the
linker correctly
2010-11-07 14:57:53 +00:00
maralvira b8ebce0fef add a memory section for RAM so that the linker will warn when you've
made your program too big.
2010-11-07 14:54:05 +00:00
maralvira 8385536c41 fix how start object is linked 2010-11-07 14:52:23 +00:00
maralvira f38598ce9f clear BSS 2010-11-07 14:49:42 +00:00
maralvira 57513948c9 Move stack near BSS so it doesn't take up space in the .bin 2010-11-07 14:48:52 +00:00
maralvira 77cf0f0f5e update ring_osc_on and _off to the new bit structs 2010-11-07 14:42:31 +00:00
maralvira c8056cc4e2 define TCF TCF1 and TCF2 --- the new bit structs don't work here for
some reason.
2010-11-07 14:42:02 +00:00
maralvira dab7faf13c Add gpio_set and gpio_reset
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
2010-11-07 14:29:04 +00:00
maralvira 4a4a39c84a Name the GPIO structure so we can set multiple bits at once 2010-11-07 14:28:30 +00:00
maralvira 4217eb2ebc Provide a function to change timer interrrupt handlers
Function irq_register_timer_handler(int timer, void (*isr)(void))
lets you change the handler at runtime.  This lets us set handlers
without necessarily knowing the name at link-time.  The old way of
having weakly-linked tmr0_isr functions should still work.
2010-11-07 14:27:01 +00:00
maralvira 65d3942c76 Add the disable_int({}) macro
This is similar to safe_irq_enable and disable
2010-11-07 14:26:24 +00:00
maralvira 83e6995af1 Add TMR_ADDR helper 2010-11-07 14:25:07 +00:00
maralvira d930ce0e2b Add some useful timer macros 2010-11-07 14:24:36 +00:00
maralvira 5e00219a9c Register definitions: get rid of some macro magic that doesn't help much
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
2010-11-07 14:24:11 +00:00
maralvira 091e4cd84e Add structure-based ITC access 2010-11-07 14:23:15 +00:00
maralvira 11ac20a361 REF_OSC is a 32-bit number, not 64-bit number 2010-11-07 14:22:51 +00:00
maralvira 745e7b5ac2 Add cal_isr() support 2010-11-07 14:21:59 +00:00
maralvira ab84453401 Add structure-based CRM definitions 2010-11-07 14:21:33 +00:00
maralvira 9d072d5309 Add macro to help compute TMR.ENBL values (useful when using #defined
values to represent timers)
2010-11-07 14:21:06 +00:00
maralvira 85e6b06175 Add pin definitions for each timer, they're fixed 2010-11-07 14:19:17 +00:00
maralvira 8d2f740f7f Fix #ifdefs in board files 2010-11-07 14:18:54 +00:00
maralvira 3726588f02 Add structure-based GPIO register definitions 2010-11-07 14:17:45 +00:00
maralvira 20b477db13 Add structure-based timer register definitions 2010-11-07 14:17:20 +00:00
maralvira c71a0243ff Add missing type for TMR0_COMP2 2010-11-07 14:16:28 +00:00
maralvira 62a45c7ba2 Add script to invoke kermit with a particular port and speed 2010-11-07 14:15:40 +00:00
maralvira 2ac88222f6 Use "rm -f" in clean rules to ignore errors 2010-11-07 14:14:47 +00:00
maralvira 2e87143381 use kermit in open-terms 2010-11-07 14:13:22 +00:00
maralvira c8be3047c3 fix byte ordering in burn-macs 2010-11-07 14:12:55 +00:00
maralvira 0450b3fd90 add script that burns the mac address only --- mac address is Redwire
IAB + tty number.
2010-11-07 14:12:27 +00:00
maralvira f913cf728b modify flasher.c to not create a vaild boot magic number if the length
of the file is zero

modify mc1322x-load.pl to optionally send a zero length file with -z;
extra data on the command line is still written.

This allows you to burn the mac adress without flashing a vaild image.
2010-11-07 14:11:50 +00:00