deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
13050 commits 6 branches 13 tags 80 MiB
Commit graph

1762 commits

Author SHA1 Message Date
George Oikonomou 977bc548f3 Renamed sensinode-debug to debug 2012-04-02 11:22:19 +01:00
Matthias Kovatsch ed92994784 Clean-up and fix for rest-server-example. 2012-03-29 18:56:46 +02:00
Matthias Kovatsch 8f9247560a Managed consistent representation generation for /obs. 2012-03-29 18:16:27 +02:00
Matthias Kovatsch c023faead2 Added Content-Type to observe notifications. 2012-03-29 18:16:25 +02:00
Matthias Kovatsch 949ba03bda Changed notify API to passing a notification message. 2012-03-29 18:16:24 +02:00
Matthias Kovatsch d102d8c607 Changed separate API and fixed token bug. 2012-03-29 18:16:23 +02:00
Matthias Kovatsch c7c7bcbf81 Branched and added custom address to Makefile. 2012-03-29 18:16:22 +02:00
George Oikonomou 23e7f242f6 Changes to the ping part of the cc2530 and Sensinode udp-ipv6 examples 
- Remove obsolete variable declarations
- prettier printf output
- cc2530 example turns on printfs
 2012-03-29 13:10:25 +01:00
George Oikonomou 4f1e251603 Some uN_t had crept back in cc2530dk and sensinode. 
Changed to uintN_t plus a bit of code formatting
 2012-03-29 13:10:10 +01:00
Vasilis Michopoulos 9475737f4b Changed some sensinode/cc2530 examples to use uip-debug.h instead of the old #define DEBUG N 2012-03-29 13:08:24 +01:00
George Oikonomou 78450aeab6 Fixed mis-formatted printfs 2012-03-29 13:08:12 +01:00
Niclas Finne 7bf4fa4bff Removed obsolete mac pointer 2012-03-28 21:51:19 +02:00
George Oikonomou 2755e261bf Turn off printf for sensinode examples which will otherwise not fit our flash 2012-03-23 16:49:49 +00:00
George Oikonomou 80002e8fd1 Fixed the stub-rdc driver used by various cc2x30 examples 2012-03-23 16:48:09 +00:00
George Oikonomou ad256e5014 New platform: TI cc2530 Development Kit 
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
 2012-03-23 14:41:07 +00:00
George Oikonomou b7674c3636 Reincarnate the sensinode/cc2430 port 2012-03-23 14:41:07 +00:00
Matthias Kovatsch 063bb12bd0 Fixed debug/test prints. 2012-03-19 18:37:25 +01:00
Matthias Kovatsch 2aa1f587bd Added ETSI IoT CoAP Plugtests server and tweaked rest-server-example. 2012-03-17 16:51:28 +01:00
Matthias Kovatsch e794088d19 Made Block1 support dependent on resource handlers.\nAdded flags and target for minimal-net. 2012-03-17 15:32:51 +01:00
Matthias Kovatsch 3a3d457a57 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2012-03-17 11:50:17 +01:00
Matthias Kovatsch 186f227972 Also excluded platform native from static routing. 2012-03-17 11:47:09 +01:00
Joakim Eriksson 90e969344a added config for serializing attributes 2012-03-16 03:08:47 -07:00
Niclas Finne 9217c8b321 fixed compiler warning 2012-03-14 15:20:02 +01:00
Joakim Eriksson adff634b88 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2012-03-09 01:11:21 -08:00
Joakim Eriksson ae3ff57c39 replaced inet6 with inet for linux to get tunbridge working. 2012-03-09 01:09:56 -08:00
David Kopf 07f6e10c1c Add display options to border router web page, default now uses stack instead of static buffer. 
Turn radio off until prefix is acquired.
 2012-03-02 16:01:12 -05:00
Ilya Dmitrichenko b67e49051c Use __APPLE__ instead of __MACH__. 2012-03-02 15:15:46 -05:00
Ilya Dmitrichenko 7621bdfc77 Fixed ifconfig for Darwin 2012-03-02 15:15:45 -05:00
Ilya Dmitrichenko 70d3acf9af Fixed baudrate issue on Darwin. 2012-03-02 15:15:44 -05:00
Matthias Kovatsch cd802979da Fixed token bug in separate response and extended API (thanks to Klaus Hartke for the bug report). 2012-02-06 06:22:55 +01:00
Matthias Kovatsch 2ef46ac47a Bugfix for separate NON requests and updated separate resonse API.\nEnabled multiple BLOCKING_REQUESTs in the same scope. 2012-02-05 06:21:35 +01:00
David Kopf 7110075108 Make static buffer the default, add comments. 2012-03-06 09:10:12 -05:00
Niclas Finne 40c32990e3 Added missing arguments to usage information 2012-03-06 12:33:16 +01:00
Matthias Kovatsch dc6142fa0b Revised Erbium observing. 2012-02-01 03:24:49 +01:00
Matthias Kovatsch 4a02790c76 Simplified Erbium support for separate responses. 2012-01-31 04:38:07 +01:00
Matthias Kovatsch 6e41f6fbe9 Erbium README update. 2012-01-30 01:41:53 +01:00
Matthias Kovatsch de82815186 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 
Conflicts:
	apps/er-coap-06/er-coap-06-engine.c
	apps/er-coap-06/er-coap-06-observing.c
	apps/er-coap-06/er-coap-06-separate.c
	apps/er-coap-06/er-coap-06-transactions.c
	apps/er-coap-06/er-coap-06.c

Removed er-coap-06.
 2012-01-30 01:30:49 +01:00
Joakim Eriksson 417a2b691f increase uip buffer size for native border router 2012-02-23 13:59:39 -08:00
Niclas Finne 5fdcd6bc13 Fixed typo, added option to run without slip connection 2012-02-21 14:42:05 +01:00
Nicholas J Humfrey a561d20828 Converted u8_t to uint8_t and u16_t to uint16_t in the examples directory. 2012-02-21 08:33:25 -05:00
Niclas Finne 23a70177b2 Added option to connect to server instead of serial device 2012-02-21 11:05:52 +01:00
David Kopf 0327fe3020 Turn off RDC before SLIP prefix interchange. Disable SIN/SUT prints, leave off-route prints. 2012-02-11 15:15:00 -05:00
Matthias Kovatsch f23e86f589 Moved status code API from REST engine to main coap implementation. 2012-01-30 01:28:43 +01:00
Matthias Kovatsch bca4d56eec Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2012-01-28 18:52:45 +01:00
Matthias Kovatsch 2240289d1f Erbium code cleanup. 2012-01-28 18:52:14 +01:00
Matthias Kovatsch 4c3e858df5 Made Erbium function parameters const where applicable.\nMinor clean-up. 2012-01-20 18:30:12 +01:00
Matthias Kovatsch 0a4c77dbff Fixed snprintf() return value handling. 2012-01-20 16:11:45 +01:00
Niclas Finne aceb36c66b Replaced SELECT_CALLBACK with an API that supports multiple select callbacks 2012-01-19 17:52:01 +01:00
Adam Dunkels 8a89f90e3e Update to the newest RPL API 2012-01-18 06:12:24 -08:00
Matthias Kovatsch c861ce0197 Fixed Erbium bugs (ext. header, client request path) and added server resource config defines. 2012-01-12 20:19:54 +01:00
Nicolas Tsiftes c6abd58340 Include stdarg.h 2012-01-10 11:26:03 +01:00
Nicolas Tsiftes 41ad30f93a Avoid setting GCC-specific flags here. 2012-01-10 11:25:18 +01:00
David Kopf b251619a2f Add wpcap for cygwin/Windows native border router 2012-01-08 13:37:56 -05:00
David Kopf 777cc88872 Add 921600 baud to slip options, fix compiler warnings 2012-01-08 13:33:40 -05:00
Joakim Eriksson 3d388760c3 added parsing of frame to get receiver address, etc 2012-01-08 02:27:37 -08:00
Niclas Finne 8b83ffec67 Added native-border-router and slip-radio 2012-01-01 09:29:33 +01:00
Joakim Eriksson 65163a9b57 Changed FRAMER to return negative values for error to allow 0 size headers. 2012-01-01 09:10:56 +01:00
Niclas Finne 28e5cac1ea Sensors already included by platform 2011-12-20 05:09:34 +01:00
Niclas Finne d14d90ea68 Moved variable definitions from header file 2011-12-20 05:09:31 +01:00
Niclas Finne c0cf69ecbd fixed compiler warnings 2011-12-20 05:09:28 +01:00
Mariano Alvira 5247be27bf dio_intcurrent is now part of the instance struct 2011-12-09 11:15:33 -05:00
Nicolas Tsiftes d0ebeb409e Merge remote-tracking branch 'sf/master' into rpl-patch 
Conflicts:
	core/net/tcpip.c
 2011-12-08 15:26:11 +01:00
Matthias Kovatsch 6e0bb440ea Restructured Erbium example resources. 2011-12-07 20:51:03 +01:00
Matthias Kovatsch 13140f922f Disabled RDC for CoAP demo purposes due to changing memory requirements of core system. 2011-12-07 20:03:54 +01:00
nvt da4d0280e8 NetDB: a simple DBMS application using Rime's Mesh protocol to transfer queries and responses. 2011-12-06 20:27:41 +01:00
nvt 639bb72855 Added the first Antelope example: a simple command-line interface to the DBMS. 2011-12-06 19:11:04 +01:00
Nicolas Tsiftes 6177187954 Check the return value of udp_new. 2011-12-01 14:40:55 +01:00
Nicolas Tsiftes 2b1549bfe8 Continued merge with sf master 2011-11-21 15:25:13 +01:00
Nicolas Tsiftes 0e32956a63 Merge remote-tracking branch 'sf/master' into rpl-patch 2011-11-21 14:59:31 +01:00
Niclas Finne c273969400 Added missing include 2011-11-15 15:14:43 +01:00
David Kopf 899123a634 Use fixed font for neighbors and routes 2011-10-27 09:25:56 -04:00
Joakim Eriksson cf61e522a8 added powertrace to IPv6 including an example 2011-10-13 15:09:40 +02:00
Matthias Kovatsch df9f871313 Fixed Erbium chunks for minimal-net 2011-10-10 16:09:17 +02:00
Matthias Kovatsch 2522566b68 Added SMALL flag for border-router (exceeded sky memory) 2011-10-10 14:30:31 +02:00
Matthias Kovatsch ce6f8de078 Fixed Erbium example simulation 2011-10-10 14:16:27 +02:00
simonduq dd8576830e Added bursts support in CSMA/ContikiMAC, and CFS-swapping in 
queuebuf. Exemplified in examples/udp-stream.
 2011-09-27 16:47:03 +02:00
Niclas Finne 3017f92a55 Enabled power commands 2011-09-19 17:58:49 +02:00
Niclas Finne 21bb28bc9b Removed obsolete file (moved to tools/collect-view) 2011-09-19 17:57:35 +02:00
Matthias Kovatsch f71b0bc794 Added Erbium REST engine with new CoAP implementation 2011-09-14 16:33:01 +02:00
David Kopf d01df43a0c Drop unneded null byte at end of httpd-fsdata files. 2011-09-10 13:04:21 -04:00
Adam Dunkels e4aec8340b Added SMALL=1 to make code fit on Tmote Sky 2011-09-06 15:36:25 +02:00
Adam Dunkels 7fb4fe2e56 Compile with SMALL=1 to make binary fit in memory 2011-09-06 01:59:16 +02:00
Adam Dunkels d28ea5e915 Compile with SMALL=1 to make binary fit in memory 2011-09-06 01:59:01 +02:00
Niclas Finne c46acc0a77 Updated for the latest version of httpd-simple in rpl-border-router 2011-09-06 00:25:20 +02:00
Niclas Finne c1b88afe48 Added safeguard to avoid copying too much data to filename 2011-09-06 00:19:31 +02:00
Niclas Finne 9ac676c7c8 Typo 2011-09-06 00:18:29 +02:00
Adam Dunkels 7faeb1fa3d Updated to use latest Rime APIs 2011-09-05 22:38:23 +02:00
nvt 708435ecc8 Improved the clarity of the Coffee test. 2011-09-05 21:25:01 +02:00
Adam Dunkels bfc314a037 Remove debug output to save space 2011-09-05 12:08:26 +02:00
Adam Dunkels a06cf93e4c Made the sky and z1 platform handling of PROJECT_CONF_H the same as the other platforms: the makefile should define PROJECT_CONF_H to be the name of the header file to include. This header file should #undef everything it #defines, as it is included after all the other configuration options in contiki-conf.h 2011-09-05 11:46:15 +02:00
Adam Dunkels 126899278c Include string header 2011-09-05 11:41:08 +02:00
Adam Dunkels 722b6e0b96 Print out sender IPv6 address when receiving data. When sending data, include a counter in the message. 2011-09-01 09:19:26 +02:00
Adam Dunkels 69d262af5b Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-08-31 20:57:31 +02:00
Adam Dunkels 587ac9c501 Copyright headers 2011-08-31 20:54:57 +02:00
David Kopf 407c76c5df output buffer unused at present, save some RAM 2011-08-31 11:52:55 -04:00
David Kopf 470887eddd Print elf size if ELF_SIZE is defined 2011-08-31 11:50:14 -04:00
Adam Dunkels 2b245cf850 Update to new API 2011-08-29 22:00:25 +02:00
Adam Dunkels 823f28e87c Made the simple UDP examples simpler 2011-08-29 21:51:09 +02:00
Adam Dunkels 2ae835ef65 Simulation file for the unicast example 2011-08-29 21:41:25 +02:00
Adam Dunkels e480740fd9 Simulation file for the broadcast example 2011-08-29 21:41:15 +02:00
Adam Dunkels b3f3163661 Example code for the simple UDP API 2011-08-29 21:33:23 +02:00
David Kopf d2aece89ef Add settings manager with program flash defaults, random routine, periodic prints with ENERGEST, node-id. 2011-08-28 16:22:39 -04:00
David Kopf 5f2b2074f0 Implement WITH_RPL option in makefile 2011-08-28 16:11:48 -04:00
David Kopf c42085c00b Add warning about slip overrun 2011-08-24 10:59:15 -04:00
David Kopf b7cd4fbd90 Add CONTIKI_PROJECT to the makefile, enabling make upload. 2011-08-16 14:37:28 -04:00
maniacbug 1c53807727 Make PERIOD and SERVER_REPLY configurable 2011-08-16 14:17:01 -04:00
maniacbug 912ea85199 Make PERIOD configurable in Makefile 2011-08-16 14:16:19 -04:00
maniacbug 3caf77a60b Added 'webserver6' to CONTIKI_PROJECT. This enables make upload. 2011-08-16 14:14:24 -04:00
David Kopf db5cee9f1b [Forget to add to previous commit] 
Free internal webserver from dependency on /apps/webserver.
 2011-08-16 10:43:47 -04:00
David Kopf e4257647cd Free internal webserver from dependency on /apps/webserver. 
Allow choice of webservers with makefile switch.
 2011-08-15 18:30:31 -04:00
David Kopf 83e3b99d54 Let RPL examples enable platform RPL 2011-08-15 14:45:44 -04:00
David Kopf 6ec85fe079 Add Iris port of Shinta Hatatani 2011-08-03 10:17:59 -04:00
Adam Dunkels 63bfaa22ae Bugfix: IPv6 address to Rime address traslation did not appear correctly in the Collect-View GUI. 2011-07-29 20:26:57 +02:00
David Kopf e3368ffb67 Fix avr progmem string accesses, add DEBUGLOGIC, configure sky defaults 2011-07-25 15:08:49 -04:00
David Kopf 0e59a0360e Raven-webserver needs raven-lcd-interface 2011-07-24 12:54:12 -04:00
David Kopf 031c45994b Add WITH_WEBSERVER=<webserver> options 2011-07-24 11:59:28 -04:00
HATATANI Shinta 04b4ff157f change some examples for iris 2011-07-18 19:53:18 +09:00
David Kopf 6355545ded Add template for AUTOSTART_PROCESS 2011-07-11 11:34:04 -04:00
Vincent Brillault dc9cbe647d Changes in RPL implementation : 
- Structural modification of RPL data storage.
- Support multiple gateways (multiple DODAG-ID with a unique InstanceID)
- Use Lollipop counters
- Add leaf-only configuration option for RPL
Bugfix :
- Correctly send "Grounded" flag in DIO
 2011-07-11 16:52:45 +02:00
nvt 8edea47e0a Added an example of using the Coffee file system. 2011-07-04 18:33:49 +02:00
Nicolas Tsiftes ccfb30707a print node ids correctly 2011-06-28 17:44:35 +02:00
Nicolas Tsiftes a92b31ad21 Minor style improvement. 2011-06-23 15:21:20 +02:00
Nicolas Tsiftes 3f72907b41 Made the file size configurable. 2011-06-14 17:14:30 +02:00
Salvatore Pitrulli 7043c25cd9 Bugfix in page layout for mb851-websense example. 2011-05-28 12:50:12 +02:00
Salvatore Pitrulli efffaac0ff Changed default size of uIP buffer and removed serial line input for mb851-websense example. 2011-05-28 12:50:10 +02:00
Mariano Alvira 97f70a2334 group light and leds together; use PLATFORM_HAS defines 2011-05-27 11:00:24 -04:00
Oliver Schmidt 4af9f534cc Added the Telnet server to the examples supported by cc65. 2011-05-21 23:24:55 +02:00
Niclas Finne 28780dff57 Removed example for deprecated Rime abstraction 2011-05-12 15:14:41 +02:00
Salvatore Pitrulli 5eabf33211 Added functions for deep sleep to mbxxx platform. 2011-04-27 18:12:23 +02:00
Salvatore Pitrulli aa968309af Merge remote branch 'sf/master' 2011-04-16 16:27:10 +02:00
Salvatore Pitrulli 774ac10bca Added Makefile.target for mb851. 2011-04-14 08:01:49 +02:00
dogan yazar 31a14c3d90 Commented periodic resource related stuff for the sake of small code print and added minimal-net configuration in README. 2011-04-13 00:07:47 +02:00
Niclas Finne 61fa812351 Added missing separators in Javascript. Fixed sensors web page to use the right Javascript function to reload sensor data. 2011-04-12 08:15:29 +02:00
Niclas Finne 6facc252a2 Updated to latest collect-neighbor API 2011-04-12 07:54:05 +02:00
Niclas Finne 4181e4774e Updated to configure MAC using NETSTACK 2011-04-12 07:52:14 +02:00
dogan yazar 91dd236c55 Changes for minimal-net and bug fix for buffer handling. 2011-04-12 00:09:15 +02:00
Salvatore Pitrulli 6655c876f2 Added functions and example for deep sleep on mb851. 
The added function let a process to make the system go
into deep sleep for maximum power saving.
The udp-ipv6-example shows how to use these new functions.
 2011-04-08 11:53:48 +00:00
Niclas Finne 5a4a39afb3 changed etx to metric 2011-04-07 09:46:37 +02:00
Oliver Schmidt 4a731dfda9 Allow for non-GUI win32 apps. 2011-04-03 10:56:18 +02:00
Enric M. Calvo 1716d837fc Merge branch 'master' of git://contiki.git.sourceforge.net/gitroot/contiki/contiki into master_cleanup 
Makefile.z1 is broken into .common and .z1 to share it with Z1 Starter Platform

Conflicts:
	.gitignore
	platform/z1/Makefile.z1
 2011-03-25 17:46:38 +01:00
Enric M. Calvo 425edf3a44 Cleaned up some files, moved z1-websense example 2011-03-16 17:41:03 +01:00
Joakim Eriksson 90ae09c7e5 fixed parsing of address to handle [<addr>] 2011-03-22 10:42:38 +01:00
dak664 14246ef811 Add optional build without internal webserver 2011-03-13 11:59:17 -04:00
dak664 97a71fea76 Conditional inclusion of the internal webserver 2011-03-11 15:07:15 -05:00
Joakim Eriksson 7033bc859e fixed the prefix query 2011-03-11 16:34:30 +01:00
dak664 d4f58ca7f0 Server address options giving different 6lowpan header compression 2011-03-08 14:15:55 -05:00
Enric M. Calvo 07f59a5142 Cleaned up z1-websense.c file 2011-03-08 12:18:26 +01:00
Enric M. Calvo ae6791abb8 minor tweaks to z1-websense and .gitignore 2011-03-08 12:03:14 +01:00
Enric M. Calvo bd2d1ee4be ictp:z1-websense with battery in mV 2011-03-08 11:19:30 +01:00
Enric M. Calvo 73fc5f6ae7 Meaningful units for msp temp&batt sensors 2011-03-08 10:05:47 +01:00
Enric M. Calvo 127a3d03ad Added IPv6 z1-websense demo w/MSP batt&temp sensor 2011-03-08 09:27:38 +01:00
Enric M. Calvo 7c3527a062 ICTP: lowered radio power + print unicast data 2011-03-07 22:33:59 +01:00
Enric M. Calvo 7fc41e1706 M Makefile.common to add tmp102 sensor by default 2011-03-07 21:23:58 +01:00
Enric M. Calvo 9c2f335e57 Merge branch 'master' of git@github.com:enricmcalvo/contiki-2.x 2011-03-07 16:35:12 +01:00
Enric M. Calvo ae67f3c257 added example-unicast2 and 3 for ictp 2011-03-07 16:33:01 +01:00
Mariano Alvira ca831a1553 rest-example: add coap client to Makefile all goal 2011-03-05 17:08:25 -05:00
Mariano Alvira 53daa9e835 rest-example: include <string.h> for memcpy 2011-03-05 17:07:56 -05:00
Mariano Alvira 43f0ad85f5 rest-example: don't do a hard override of config options 2011-03-05 16:51:33 -05:00
Enric M. Calvo c5548c5ca9 added mV test-battery file 2011-03-04 15:58:09 +01:00
Enric M. Calvo 07d921b08e Modified Makefile and test-potent.c for ICTPWSN 2011-03-04 15:54:21 +01:00
Enric M. Calvo ef706670e5 added example-unicast2.c 2011-03-03 17:20:11 +01:00
Enric M. Calvo a098cdb5df added makefile 2011-03-03 17:19:06 +01:00
Enric M. Calvo 70a500df50 added example unicast with temperature 2011-03-03 17:13:42 +01:00
Enric M. Calvo efb4a69887 Cleaned up rssi-scanner example directory 2011-03-03 13:58:25 +01:00
Enric M. Calvo b54c97c7cf Added ViewRSSI3D example. 2011-03-03 13:55:33 +01:00
Enric M. Calvo 621aff1aeb Correceted cc2420 function calls+modified makefile 2011-03-03 13:50:56 +01:00
Enric M. Calvo 0c6fd04f44 Modified contiki-conf.h and added sensys-scanner. 2011-03-03 13:44:28 +01:00
Fredrik Osterlind 499c13a357 removed execute flag of source files (avoids diff problems with egit) 2011-03-01 18:16:42 +01:00
Enric M. Calvo 701a42e239 Added dummy light driver. Now skywebsense likes Z1 
The light sensor driver is mapped to the same pin as the potentiometer
in Z1 Starter Platform. sky-websense is untouched, though.
 2011-02-27 21:28:25 +01:00
Enric M. Calvo 414d926966 Sky-websense compiles for Z1 (testing) 2011-02-27 20:10:09 +01:00
Enric M. Calvo 404b735cc4 Fixed radio and contiki conf to get RIME working 
cc2420 isr handled at cc2420-arch, disabled accel. interrupts and modified
platform/z1/contiki-conf.h to use same mac as sky.
Added example-broadcast-button, sends packets every second or when button pushed.
Works with other Z1s and Sky
 2011-02-27 12:35:19 +01:00
Enric M. Calvo 9acdb98a56 Added a quick sht11 sensor driver support for Z1 
Support for Sensirion SHT1x/SHT7x support is adapted from core for Z1 in the Ziglet port.
XXX TODO:
 + Remove SHT11_PWR
 + Lines are shared with I2C, hence port reconfiguration must be added at the driver level.
 2011-02-26 12:41:56 +01:00
Enric M. Calvo 44ce1699f2 Definition of Z1 Starter Platform in contiki/platforms + LEDs + Potentiometer 2011-02-25 16:08:50 +01:00
Enric M. Calvo 3ec4143252 Added Potentiometer sensor in Z1 Platform 2011-02-25 16:01:40 +01:00
Enric M. Calvo 659f36eb79 Updated *-sensor.c files from the sky platform. 
Fixed battery-sensor plus added simple test (XXX)
 2011-02-25 15:35:41 +01:00
Mariano Alvira ea527da162 don't do a hard override of platform config in rpl project config 2011-02-08 09:21:16 -05:00
Mariano Alvira 8a9384c22e rest-example is now rest-server-example 2011-02-08 09:07:45 -05:00
David Kopf 2ff236c4be Update description of make process. 2011-02-08 07:03:32 -05:00
dak664 ee65d0d887 Allow other (compatible) AVR targets 2011-02-07 13:37:43 -05:00
enricmcalvo af6d2f3e72 Added tmp102-related makefiles directives for proper compilation. 2011-01-23 18:54:18 +00:00
enricmcalvo 47613e57ad Added test program in the z1 examples directory for the tmp102 temperature sensor. 2011-01-20 10:28:48 +00:00
joxe db0423af20 added response to Mac addr request and added addrs in printout 2011-01-17 20:05:51 +00:00
salvopitru dcff411f9d New example for mb851 board that comes from sky-websense. 2011-01-17 10:58:04 +00:00
joxe d7712b27d0 added undef of putchar for platforms where it is a macro 2011-01-14 17:57:48 +00:00
joxe 8663cb8921 fixed compilation error 2011-01-12 20:00:48 +00:00
joxe 20f8777fd6 patched rest-example 2011-01-12 18:30:29 +00:00
adamdunkels 820d6eb334 Allow the network to settle before sending first packet. Packet transmissions are now periodic, and randomized within each period. 2011-01-10 15:11:44 +00:00
nvt-se 540675bc6a Updated the announcement example to follow the current API. 2011-01-07 23:23:31 +00:00
doganyazar 0630e0c465 Mentioned Matthias Kovatsch's CoAP Firefox plugin as an example CoAP client. 2011-01-03 22:31:57 +00:00
doganyazar 5fcfd826bd Minor modification in .well-known/core service after the comments of Matthias Kovatsch. 2011-01-03 22:25:04 +00:00
doganyazar a81efabfb5 Clarification in README 2011-01-03 22:19:32 +00:00
dak664 26cebb6436 Show avr-size once and only once regradless of whether recompilation is needed. 2010-12-22 22:47:33 +00:00
dak664 95982b40ba $make will show avr-size once and only once whether or not a build needs to occur. 2010-12-22 21:13:09 +00:00
salvopitru d86b7c4592 Added example for the elfloader on the MB851 platform, taken from sky-shell-exec example. 2010-12-15 15:33:30 +00:00
salvopitru c325e212f6 Changed COFFEE_FILES to COFFEE. 2010-12-15 14:50:29 +00:00
dak664 ced88c2eff Give jackdaw fe80::0 address and number webservers from fe80::1 2010-12-14 23:22:01 +00:00
dak664 1d2a5ca671 Minor format and comment changes 2010-12-14 22:51:04 +00:00
adamdunkels 73cdccb9f4 New example that shows how to send and receive broadcast and unicast as well as how to use a simple Contiki list and a memb memory block pool. 2010-12-14 10:07:28 +00:00
dak664 35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664 a5cbd0cd94 Add status page, change ipv6 address to ::101 and ::102 2010-12-04 21:24:29 +00:00
dak664 0f6c089179 README additions 2010-12-03 20:45:35 +00:00
dak664 8ab0467705 Add hello-world README 2010-12-03 16:39:56 +00:00
dak664 3d3ad9e2c2 Fixes to allow ipv4 (hello world) builds 2010-12-01 16:23:55 +00:00
dak664 fe904bab40 Use proper recursive make invokation 2010-12-01 15:05:39 +00:00
doganyazar b58e13f8e1 Defined wITH_COAP=1 to made COAP default rather than HTTP 2010-11-30 14:47:02 +00:00
doganyazar f363140186 Minor bug fix found by Niclas. 2010-11-30 13:28:48 +00:00
doganyazar 37b47e4cf2 Syntax update 2010-11-30 13:22:26 +00:00
doganyazar dfa12351da Added some more description to README. 
Makefile update is about changing ifdef to ifeq so that users don't be misleaded.
 2010-11-29 12:55:35 +00:00
doganyazar d14e8996ab Added more details to README and small printing modification in client example. 2010-11-24 10:56:53 +00:00
doganyazar c4f5ebcaaa Added a coap client and running coap-client-server COOJA simulation. Made README more detailed. 2010-11-24 10:10:48 +00:00
doganyazar 24a5dafcd3 Removing unnecessary files to add the new ones. 2010-11-23 20:59:26 +00:00
adamdunkels 125656d3cd Let node ID 1 be the source 2010-11-15 21:50:02 +00:00
adamdunkels ee6f542a06 Add checks for file size problems (fix by Roger Larsson) 2010-11-15 21:49:05 +00:00
nifi 2b1f62afea Example application that runs the Contiki Shell with Collect View 2010-11-12 17:46:56 +00:00
dak664 9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
nifi 3975abec8a Debug output cleanup (fixed compiler warning) 2010-11-12 13:17:45 +00:00
salvopitru 28e1445a0f Added a simple implementation of Coffee for STM32W108. 2010-11-10 11:20:44 +00:00
joxe a920b73903 fixed Makefile to work with platform other than sky 2010-11-07 18:32:55 +00:00
adamdunkels 5cdc2e877f Don't place link if destination is the null address 2010-11-07 10:32:13 +00:00
enricmcalvo 5faeca7bfe Added test application to test accelerometer 2010-11-07 08:41:48 +00:00
adamdunkels 47e7fd35c2 Data collection example 2010-11-06 15:17:38 +00:00
adamdunkels 994e350026 Broadcast example 2010-11-06 15:03:48 +00:00
adamdunkels 5783e704d4 Hello, world example 2010-11-06 14:56:48 +00:00
adamdunkels 6947e750d0 Removed left-over powertrace include 2010-11-06 14:43:45 +00:00
adamdunkels 46ce00c173 Even out the transmissions during the interval 2010-11-06 11:55:15 +00:00
adamdunkels f4671d63e1 Added network arrows in Cooja, fixed so that node ID 1 now is sink 2010-11-06 10:44:06 +00:00
adamdunkels 1bf044f2c4 Moved project-conf.h 2010-11-03 15:46:41 +00:00
adamdunkels 5444581739 Data collection over RPL/IPv6 2010-11-03 15:36:38 +00:00
adamdunkels 04fa714930 Moved the Collect-view application from the examples/sky-shell directory and into its own tools/collect-view directory 2010-11-03 14:53:05 +00:00
adamdunkels 39cfd156b2 Bugfix: avoid sending bogus data over the radio when no prefix is set; bug reported by mathieupouillot 2010-11-03 07:53:12 +00:00
oliverschmidt a54c728b04 Made use of PROCESS_PAUSE(). 2010-10-31 22:43:06 +00:00
doganyazar edff8c1da3 removed info about COAPTester since it is not included in Contiki 2010-10-29 08:57:56 +00:00
nifi 3c65b1d5bc Added link direction to network graph 2010-10-28 21:50:22 +00:00
nifi f0417d8be3 Made exit configurable 2010-10-28 21:49:01 +00:00
nifi 571519db97 Updated to run without serial connection 2010-10-28 14:17:10 +00:00
doganyazar 2682536bf7 Removed web-conf.h to change its name to project-conf.h 2010-10-28 13:20:27 +00:00
doganyazar 825cc4f872 Updated PROJECT_CONF_H 2010-10-28 13:13:53 +00:00
doganyazar d7afff18c7 Changed name of web-conf.h to project-conf.h 2010-10-28 13:11:08 +00:00
doganyazar b71de57f94 Initial commit of a RESTful web service example using experimental COAP/HTTP/REST implementation for Contiki 2010-10-28 12:42:07 +00:00
nifi 09ce205987 Fixed ETX value 2010-10-26 13:05:08 +00:00
salvopitru a61a9459ea Added examples for MB851 platform. 2010-10-25 13:34:28 +00:00
nifi 7309767d06 The collect view functions now take the node's routing metric, not the parent's routing metric. 2010-10-24 21:40:54 +00:00
adamdunkels 3a15d6c94b Shorter column names 2010-10-24 21:11:32 +00:00
adamdunkels f5adad0ff5 Set new default values 2010-10-24 21:11:13 +00:00
nifi ce9af386c6 Corrected ETX values 2010-10-22 20:39:13 +00:00
nifi 8cd27a3edb Paint links below nodes 2010-10-22 13:39:52 +00:00
nifi 39d1e09232 Added ETX factor to convert the ETX value 2010-10-22 11:04:04 +00:00
joxe aefd88c110 moved config file 2010-10-21 18:23:44 +00:00
adamdunkels 3d51e065c1 Made use of new collect-view shell command 2010-10-20 15:22:11 +00:00
oliverschmidt da7c9700cb Added support for the FTP standalone client to the c128 target. 2010-10-19 22:41:24 +00:00
oliverschmidt bcc2120570 Added support for the FTP standalone client to the c64 target. 2010-10-19 22:31:59 +00:00
adamdunkels 5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro 
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
 2010-10-19 18:29:03 +00:00
joxe 71d5c5f3c1 removed servreg_hack from the rpl-udp example 2010-10-18 13:43:41 +00:00
oliverschmidt f4e2c41c76 Added support for the FTP standalone client to the atari target. 2010-10-16 11:42:40 +00:00
oliverschmidt abe360e9fb Added support for the FTP standalone client to the apple2enh target. 2010-10-16 10:41:46 +00:00
oliverschmidt 3c655eed6f Added CTK standalone FTP client example. 2010-10-16 10:36:20 +00:00
nifi 5a94145f7e Bug fix: corrected sort with average numbers 2010-10-14 18:53:08 +00:00
nifi b49db633f3 Added button to connect to serial in the node control panel 2010-10-14 18:13:09 +00:00
nifi 0322b4ed22 Bug fix (typo) 2010-10-14 17:00:56 +00:00
nifi 603a475584 Added beacon interval to node info panel 2010-10-14 16:49:34 +00:00
nifi c522b9333c Marked the row with avereage values with bold font 2010-10-14 06:45:45 +00:00
nifi a5fe4ae1c3 Changed average values to always be floating-point 2010-10-14 06:31:38 +00:00
nifi 0d7f895744 Added configuration of max item count in time charts 2010-10-13 22:55:47 +00:00
nifi 1ca83eb314 Added average values 2010-10-13 22:55:14 +00:00
nifi a292ff9fe6 Added legend 2010-10-12 22:26:56 +00:00
nifi d2f7f62a34 Added quick start help text, added explicit save settings in menu, fixed bug in the background image selection. 2010-10-12 16:28:19 +00:00
adamdunkels ed2228ff6f Replaced the old sky-alldata command with the new collect-view-data command. Added the new shell powertrace command. Cleaned up. 2010-10-12 11:42:37 +00:00
adamdunkels 91565347a7 Removed the default immediate initialization of the network (the collect & netcmd commands). This should be done via the GUI instead now. 2010-10-12 11:41:44 +00:00
adamdunkels cc33fa0249 Replaced the sky-alldata command with the new collect-view-data command. Also added an explicit killall command before sending a new collect command. 2010-10-12 11:39:59 +00:00
adamdunkels a5d34a4fab Reordered the data items to match the new collect-view-data shell command instead of the old sky-alldata command 2010-10-12 11:39:10 +00:00
adamdunkels a4a69aea82 Added a panel showing the beacon interval 2010-10-12 11:38:34 +00:00
nifi febb07a71b Added simple spring layout that attracts connected nodes in node visualizer 2010-10-10 22:39:09 +00:00
nifi e770e87995 Added more options to send and receive data (via command, file, standard in) 2010-10-07 21:13:00 +00:00
nifi 20e04b5c23 Added parsing of COOJA logs 2010-10-07 21:01:46 +00:00
nifi 54692bf62a ETX 1.0 is 8, not 16, in the new collect code 2010-10-07 20:59:48 +00:00
oliverschmidt d1a75f73b3 Made cfs-based webserver example compatible with 8.3 file systems. 2010-10-06 19:28:57 +00:00
adamdunkels cd7bbae9cc Added a 'retransmits' field 2010-10-03 20:19:37 +00:00
adamdunkels c0fb601354 Added the number of neighbors to the collection view app 2010-10-03 20:19:12 +00:00
adamdunkels f9687e8f5f Added a neighbor number field to the sky-alldata command. The parent fields now correctly specify the parent neighbor, not just the currently best neighbor. 2010-10-03 20:16:57 +00:00
adamdunkels d8165d30d5 Fix: ETX 1.0 is 8, not 16, in the new collect code 2010-09-30 23:09:25 +00:00
nifi 2642a55174 Added Routing Metric and ETX 2010-09-30 22:24:45 +00:00
oliverschmidt 7c7e126a2d Reduced number of concurrent connections to five (like on the Apple II) to have the web server fit into RAM. 2010-09-29 21:45:29 +00:00
oliverschmidt c839eacbdf Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/. 2010-09-29 19:44:01 +00:00
nifi a244cf647e Added stop button to stop any running commands 2010-09-28 23:32:51 +00:00
nifi dde50b028a Added tab to set new collect parameters 2010-09-28 23:12:16 +00:00
oliverschmidt 8eeeef17d1 Made cfs-based webserver example compatible with 8.3 file systems. 2010-09-28 19:36:16 +00:00
nifi bf91d4906b Made configuration of node info table persistent 2010-09-26 21:48:21 +00:00
nifi ec63e067ee Removed obsolete charts (replaced by more generic versions) 2010-09-24 06:01:16 +00:00
nifi 08bde833ee Made it easier to add/remove columns to the node info table 2010-09-24 06:00:16 +00:00
nifi 384df2da48 Use 0 if no shortest inter-packet time is available 2010-09-24 05:54:04 +00:00
adamdunkels 9ce45ac452 Send only link estimate, not rtmetric + link estimate, for best neighbor 2010-09-22 22:14:03 +00:00
nifi fb9c7607b0 Added charts over next hop changes and estimated lost packets. 2010-09-21 20:24:18 +00:00
dak664 7b529cac03 Move fakeuip.c to examples directory for proper selection when CONTIKI_NO_NET=1 2010-09-17 16:49:44 +00:00
nifi bba653f20c Added categories for cleaner tab layout 
* Added estimated packet loss and next hop change count to node info panel
 2010-09-15 16:15:10 +00:00
nvt-se 072f208a29 Removed unused variable. 2010-09-15 15:55:08 +00:00
nifi 819c55ba14 Added gradients to bar chart 2010-09-15 15:52:28 +00:00
nifi b783aebfcd Do not include last (ongoing) minute in chart 2010-09-15 15:20:47 +00:00
nifi 66e32facee Shorter chart legend 2010-09-15 15:16:49 +00:00
adamdunkels 11d5a3eb28 Set the default packet rate to one packet per minute. Set the default number of hop-by-hop retransmissions to 15. 2010-09-15 06:30:45 +00:00
nifi 7ffa792a26 Changed NodeInfo to use a table to show node information instead of text area. 2010-09-14 23:04:50 +00:00
nifi 3a8313f0cc Clear all nodes when clearing sensor data. Use Node.compareTo() to sort nodes instead of NodeComparator. 2010-09-14 22:54:58 +00:00
nifi 85ca99f66a Only remember last link for each node + changed node comparator to sort by id 2010-09-14 22:40:59 +00:00
adamdunkels 3a4b479704 Added a radio duty cycle tab; made packet reception chart have integer labels 2010-09-14 14:23:58 +00:00
nifi 4b0ffb0739 Bug fix: use getNodeTime() instead of getSystemTime() 2010-09-14 11:27:23 +00:00
adamdunkels 87036b0089 Bugfix: use getNodeTime() instead of getSystemTime() 2010-09-14 10:44:07 +00:00
nifi aff3fcad87 Fixed to sort nodes by id. Added charts for packets received last 5 minutes and last/average hops to sink 2010-09-14 10:38:12 +00:00
nifi a226286351 Added option for non-stack bar chart 2010-09-14 10:35:00 +00:00
adamdunkels 66afde05f4 Reduced size of binary to fit on Tmote Sky platform 2010-09-14 07:17:21 +00:00
adamdunkels afd18a4fb5 Fixed compilation errors 2010-09-14 06:47:08 +00:00
adamdunkels 3bca8cfe3d Bugfix: address of first argument to collect_neighbor_list_best() 2010-09-13 14:34:51 +00:00
adamdunkels 754b3113c2 Update to new collect neighbor API 2010-09-13 14:33:20 +00:00
nifi e64dca7b77 Always include zero packets in the chart bounds 2010-09-13 12:22:18 +00:00
adamdunkels 51477dae23 Updated to use new Collect neighbor api 2010-09-08 19:32:42 +00:00
nifi c829c7f728 Added shortest/longest/average period to node info panel 2010-09-08 12:40:18 +00:00
nifi 20ea27c468 Updated to sort nodes by numeric id instead of name 2010-09-08 12:39:40 +00:00
nifi 77014a8d90 Added chart with received packets per minute and skeleton for node statistics panel 2010-09-06 22:42:29 +00:00
nifi 46f258f66c Disabled visible node drag when moving nodes in the map panel (too cpu intensive). 2010-09-06 22:32:56 +00:00
nifi 8096e26f22 Added duplicate detection 2010-09-06 22:19:09 +00:00
joxe a36ea1f506 fixed compilation bug 2010-08-31 20:05:44 +00:00
nifi 302a07344c * Updated to show base shape in line charts (can be disabled in menu) 
* Added simple packet delivery chart based on sequence numbers
 2010-08-31 13:05:40 +00:00
oliverschmidt c54fee4738 Demonstrate usage of 'wwwroot.cfg' by allowing access to the example files from the build directory. 2010-08-30 20:01:30 +00:00
oliverschmidt a5dff5e08a Up to now the root of the webserver filesystem was always the current directory. Now an optional file 'wwwroot.cfg' is read. If present its content is used as prefix in the conversion of http paths to local paths. This prefix may be a relative path as well as an absolute path. 
This is especially useful for the cc65-based targets as it ain't possible there to "just change into the wwwroot directory and start the webserver using its pathname".
 2010-08-30 19:44:38 +00:00
joxe 3d22887e9f added phidget example for z1 2010-08-27 12:51:41 +00:00
joxe a72252cbd8 removed forced configuration of number of routes and neigbors 2010-08-24 17:54:56 +00:00
oliverschmidt 164d55e39d Reduced MTU size in order to allow for a reasonable (and full screen width) URL length. 2010-08-14 08:32:00 +00:00
dak664 4006f62df5 Keep httpd-fsdata.c on a $make clean, add documentation. 2010-07-30 20:07:41 +00:00
oliverschmidt c602c61468 Activated Platform-specific File System (PFS) for the C64/C128 by default for all programs with R/W CFS access. 2010-07-22 10:30:12 +00:00
adamdunkels 12a1ad2e7d Add the servreg-hack app to the Makefile 2010-06-15 19:02:40 +00:00
adamdunkels 237398a74b Rewrote the code to use the servreg-hack module, so that clients can look up the IP address of the collector node. 2010-06-15 19:02:00 +00:00
adamdunkels 5dc55f0a1b A quick and dirty service registry daemon hack. The servreg-hack 
allows a program to register an 8-bit service ID that gets
disseminated to the entire network, as long as a servreg-hack daemon
is running on all neighbors. Other nodes can look up the service ID to
figure out what nodes in the network offer this service.

This is officially labeled as a "hack" so that we don't get too comfy
with it; this hack is not the future of service discovery and
advertisement in Contiki.
 2010-06-15 19:00:28 +00:00
adamdunkels 951fd78f6c ctimer moved from net/rime to sys/ 2010-06-14 18:58:45 +00:00
nvt-se 6eadf2522f ctimer.h moved 2010-06-14 16:19:45 +00:00
nifi f8078ae277 Renamed wget() to wget_get() and added server port as argument 2010-06-14 14:12:43 +00:00
adamdunkels 59f5284248 Increase the size of the route and neighbor tables 2010-06-14 07:03:53 +00:00
nifi b21d2494bc Added example using HTTP to control and be controlled. 2010-06-08 22:39:30 +00:00
nifi 53d637a2bc added missing include 2010-06-08 19:53:49 +00:00
nifi f51e3a4f1e minor cleanup 2010-06-08 13:27:06 +00:00
nifi 3c3f3a532d Added web pages "/1" and "/0" to turn leds on or off 2010-06-08 12:34:43 +00:00
nvt-se a9498df8f5 rpl_get_dag is no longer needed since rpl_set_root returns the dag pointer. 2010-06-03 15:24:13 +00:00
nifi 351325b7f4 minor cleanup of example (changed to use uiplib to parse IPv6 address) 2010-06-01 13:31:23 +00:00
nifi b54c6e673b Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t for compability with IPv6 2010-05-31 15:22:08 +00:00
joxe df104b77a3 updated with support for getting prefix from tunslip6 and for setting RPL prefix 2010-05-25 20:34:51 +00:00
joxe 293f08e9c7 added support for experimental RPL prefix based autoconf 2010-05-25 20:19:16 +00:00
nvt-se e4bcc8a35e reduced the width of the Log Listener window 2010-05-25 15:29:04 +00:00
nvt-se 07a2179953 simplified 2010-05-24 15:43:18 +00:00
nvt-se dbd710626a Added optional server replies. 2010-05-21 13:45:50 +00:00
nvt-se 64d703a67e Use the new Mote Attributes interface. 2010-05-21 13:45:04 +00:00
nifi a9aacac63a Fixed to set address on interface 2010-05-20 11:27:14 +00:00
nifi 86879f66ac removed internal make targets 2010-05-18 17:05:45 +00:00
nifi e268b094d4 Fixed to only show used address entries at startup and removed hack to make address 'final' 2010-05-10 15:15:17 +00:00
nifi 2104fd595f added nexthop to the route table listing 2010-05-10 14:25:02 +00:00
nifi 27160b91a7 Added rules to connect to slip bridge connected via serial or running in COOJA using tunslip6 2010-05-10 14:19:16 +00:00
nifi 1696e9f70f Added documentation 2010-05-09 15:57:34 +00:00
nifi 09424f02cb Added example COOJA simulation 2010-05-09 14:31:33 +00:00
nifi 7b4f099a7f Added rules to connect to slip bridge connected via serial or running in COOJA using tunslip6 2010-05-09 14:31:09 +00:00
nifi d2f5923dbc corrected comment 2010-05-09 13:29:33 +00:00
nifi 9bb168040c Web server example showing light and temperature sensor data 2010-05-09 12:56:48 +00:00
nifi 8c49cf26e5 Added simple web server listing the neighbors and routes 2010-05-09 12:52:05 +00:00
nifi 52f27ea1cb reduced the buffers to save memory 2010-05-05 21:54:41 +00:00
nifi ad450e18a7 added project configuration 2010-05-05 21:12:56 +00:00
joxe efc8ef760d added very basic rpl-border router example 2010-05-05 19:44:30 +00:00
joxe b54f410bc8 minor cleanup 2010-05-04 14:40:52 +00:00
nifi cc55197d52 Updated to use the platform 'jcreate' 2010-05-03 22:02:59 +00:00
nvt-se f690294842 Example has been replaced by udp-ipv6 2010-05-03 14:57:59 +00:00
nvt-se 2fd414b22f Support fragmentation testing. 2010-04-30 22:20:41 +00:00
nvt-se d751238747 Added an example of using UDP over an RPL-enabled IPv6 network 2010-04-30 15:52:48 +00:00
fros4943 0d5b01d304 decreased elf loader memory to avoid stack overflow 2010-04-26 14:03:10 +00:00
nifi 4c26783948 Updated for new for new uIPv6 APIs. Also fixed compiler warning. 2010-04-20 22:32:19 +00:00
joxe fd3b773eb4 updated for new uIPv6 APIs 2010-04-17 21:22:39 +00:00
oliverschmidt 8b6d34dbfc Configure maximum number of C128 web server connections indirectly via maximum number of TCP connections. 2010-04-11 21:34:18 +00:00
oliverschmidt 8108585795 Configure maximum number of Apple2 web server connections indirectly via maximum number of TCP connections. 2010-04-11 21:23:45 +00:00
oliverschmidt eae42d02d5 Added optional URL filtering code to the CFS web server contributed by Kajtar Zsolt (and activated it by default). 2010-04-11 19:18:47 +00:00
nifi 1b2f36cdd9 Updated to latest announcement API and fixed typo 2010-04-09 13:19:05 +00:00
oliverschmidt 4e30e73bdb Activated Platform-specific File System (PFS) for the C128 by default for all programs with R/O CFS access. 2010-04-06 10:39:50 +00:00
oliverschmidt 6c4c98644e Activated Platform-specific File System (PFS) for the C64 by default for all programs with R/O CFS access. 2010-04-06 10:24:43 +00:00
oliverschmidt 6cbf46eeda Removed 6502-specific files as this example doesn't build on any platform cleanly anyway. 2010-04-06 10:21:34 +00:00
adamdunkels e60afb0888 Updated to latest collect-neighbor API 2010-04-04 12:30:39 +00:00
fros4943 e7c6002432 neighbor.h was removed 2010-03-29 12:48:39 +00:00
fros4943 4d0147dd18 removed bad neighbor.h include 2010-03-29 09:50:44 +00:00
nifi 8ecdb07dcf Updated to new collect router API 2010-03-29 09:33:20 +00:00
adamdunkels 79ba20ddcc Updated to new collect router API 2010-03-25 08:52:23 +00:00
nifi 1daee93f63 fixed for new uip6 APIs 2010-03-24 22:09:13 +00:00
nifi 6609c84abb Updated API for neighbor (renamed to collect-neighbor) and changed to only use timesynch when configured 2010-03-23 23:04:21 +00:00
fros4943 6197ac9c54 dependa on powertrace application 2010-03-23 14:06:16 +00:00
nifi 7e022b42df removed unnecessary includes to fix comilation error (neighbor.h has been renamed) 2010-03-22 10:21:57 +00:00
adamdunkels 71bc4b81fc Renamed collect's neighbor module to collect_neighbor; added powertracing 2010-03-19 13:26:54 +00:00
adamdunkels f2c9b3e813 Remove old neighbor.h inclusion 2010-03-19 13:20:40 +00:00
fros4943 9fb4c73d8d WITH_UIP in Makefile 2010-03-10 12:21:12 +00:00
adamdunkels 72ba836238 Removed sendtest command to make binary fit in Tmote Sky 2010-02-28 20:20:43 +00:00
nifi 7ca6cb2ce2 fixed compiler warning 2010-02-23 23:06:04 +00:00
adamdunkels 5e6fd67213 Powertrace: a program that periodically prints out the power consumption; suitable for experiments or simulations that want to measure power consumption 2010-02-20 14:15:45 +00:00
oliverschmidt 1817acae15 Now that the C64 mouse driver works we can activate the mouse support for this target :-) 2010-02-18 21:30:31 +00:00
adamdunkels e18f739f04 Fixed compilation without timesynch compiled in 2010-02-18 21:02:30 +00:00
adamdunkels acd40454d7 Added power & Rime debug commands 2010-02-15 17:47:01 +00:00
joxe 46c7cd23fc added example of ext-sensor for Jcreate 2010-02-13 12:21:31 +00:00
oliverschmidt 7ef7efecd8 Without forms, centering and history we can just squeeze in DNS. 2010-02-13 10:44:23 +00:00
oliverschmidt d5f1b0be06 Some targets (i.e. the CBMs) don't echo the \n. Therefore print (additional) \n's. 2010-02-12 10:14:09 +00:00
oliverschmidt 116e98175c After a CTK wget and a shell wget finally a plain vanilla CLI wget. 2010-02-10 23:51:38 +00:00
oliverschmidt 1dfcf37ea4 Now that "even" the 6502 targets support stdout we can just puts() our feedback. 2010-02-10 07:59:42 +00:00
adamdunkels 99db24ec2d Added a #define option to send more data than needed to be able to test fragmentation 2010-02-06 09:58:59 +00:00
oliverschmidt e88d209214 Adjusted process name to title case. 2010-02-05 19:13:05 +00:00
adamdunkels 85774e438d Minor spelling fix 2010-02-05 11:38:59 +00:00
adamdunkels e9ac1488e7 Updated to the new number of rtimer ticks per second 2010-02-04 16:21:47 +00:00
adamdunkels 511389ae09 Have to remove PLATFORM_BUILD from the makefile to make code fit into memory 2010-02-04 07:53:52 +00:00
fros4943 c3a2c11bbc added dec64 command 2010-02-04 00:10:48 +00:00
adamdunkels 5be78ce843 The button sensor must be initialized before it is used 2010-02-03 21:11:33 +00:00
adamdunkels b5ea3e297b Readded the shell file module so that the nightly test works 2010-02-03 20:42:23 +00:00
adamdunkels 1a34dbe550 Broke out the base64 commands from the text module 2010-02-03 20:37:29 +00:00
adamdunkels 7d243a8586 Added the telnet code to the list of targets to make them compile when running a bare 'make' 2010-02-03 20:06:40 +00:00
adamdunkels ef29f610f6 Reduced the available commands to make code fit 2010-02-03 20:05:19 +00:00
adamdunkels b9e28ce35b Compressed the Javascript code to improve loading time; placed the uncompressed code in a separate file 2010-02-03 16:46:52 +00:00
adamdunkels 280a8b9327 MAC channel check rate configuration paramter renamed 2010-02-03 16:45:45 +00:00
joxe c9c9d71831 fixed button to toggle light sensor 2010-02-03 09:54:38 +00:00
adamdunkels 1fdfc6fe60 The IPv4 examples work much better with the cxmac power-saving radio protocol; added Makefile flag to get the non-cfs HTTP server 2010-02-03 01:19:25 +00:00
joxe 97b7a9a209 instantiated file-description and fixed style 2010-02-02 21:41:54 +00:00
joxe e198b4508b added activation of button sensor and activation and deactivation / toggle of light sensor 2010-02-02 21:17:32 +00:00
adamdunkels b8892a7be0 Removed directory; contents are now under contikiprojects 2010-02-02 19:56:31 +00:00
adamdunkels 53d93eb83f Removed Coffee to reduces the size to make it compile successfully 2010-02-02 19:41:49 +00:00
adamdunkels 50b2118731 Send to node 1.0 instead of 41.41, to make the example work better in Cooja. 2010-02-02 16:36:46 +00:00
oliverschmidt ce48ac2d94 Added high-level config macros for the C128 (due to lack of memory no DNS support for the webbrowser). 2010-02-01 21:15:36 +00:00
nifi 72f42bffd3 added missing include 2010-02-01 17:40:33 +00:00
adamdunkels 7df2613226 Ensure that uIPv6 always is compiled and used 2010-02-01 11:52:52 +00:00
oliverschmidt 8c47eaf3b7 Added email client example. 2010-01-31 21:46:39 +00:00
oliverschmidt 8c93dd3e99 Added IRC client example. 2010-01-31 18:28:43 +00:00
nifi c1a4a83f44 Updated to match the new sensors API and fixed argument that should be const 2010-01-31 16:47:44 +00:00
oliverschmidt 57ce5f8fba Reverted last change. 2010-01-31 15:11:02 +00:00
oliverschmidt 75b773c45c Deactivated mouse support on the C64 because of "phantom keystroke" and "phantom mouseclick" issues :-( 2010-01-31 13:40:50 +00:00
oliverschmidt 1fe9bf24c9 Re-added temporarily removed file. 2010-01-31 13:36:06 +00:00
oliverschmidt 40101db78f Temporarily removed file due to CVS issue. 2010-01-31 13:34:19 +00:00
oliverschmidt 0ebe86802c Use a simpler project name as it now ends up as program file name. 2010-01-31 11:59:07 +00:00
fros4943 792770dd6c randomized send interval to avoid perfect synchronization 2010-01-21 13:04:03 +00:00
nifi 0d559a286d fixed typo + announcement API to avoid compiler warning 2010-01-19 11:23:13 +00:00
nifi 3a5dd23ace Updated to match the new sensors API 2010-01-18 11:13:40 +00:00
nifi ef8d3c1bbd Fixed to work with new sensor API (SENSORS_ACTIVATE no longer use pointer) and removed ping command to save code space 2010-01-18 11:07:15 +00:00
nifi c557f23bf4 Updated to match the new sensors API 2010-01-15 11:02:18 +00:00
nifi c5508f9f88 Changed to use the light-sensor and sht11-sensor instead of directory interfacing the drivers 2010-01-15 10:32:36 +00:00
nifi bf04174bb3 Updated to match the new sensors API 2010-01-15 10:24:35 +00:00
adamdunkels 0266411332 Use the sht11_sensor instead of directly interfacing the sht11 driver 2010-01-15 08:51:56 +00:00
adamdunkels 2d0802de72 Activate the light sensor before obtaining the value, deactivate it afterwards 2010-01-14 20:15:34 +00:00
nifi 67ae9fe26a Updated to match the new sensors API 2010-01-14 18:18:51 +00:00
joxe d9900a474a fixed to work with new sensor API 2010-01-14 17:39:22 +00:00
joxe d39234cfd9 fixed for new sensors API 2010-01-14 15:03:28 +00:00
joxe a6abcbe578 fixed to compile with new sensors API 2010-01-14 14:32:22 +00:00
joxe 82241f640e fixed for new sensor APIs 2010-01-14 14:04:39 +00:00
nvt-se 553589d0bb argument must be qualified as const 2009-12-28 18:18:23 +00:00
nifi e032f7ac2c fixed compiler warnings 2009-12-18 15:26:35 +00:00
adamdunkels df784546ee Remove sniff and debug commands to save code space 2009-12-06 23:28:25 +00:00
nifi b9418a91d7 Added call to putchar to force linking (fixes compilation error). 2009-11-20 10:45:07 +00:00
nifi 5de7d07093 fixed compiler warning 2009-11-19 17:31:23 +00:00
nifi e6015bce4c added printout of sender of received messages 2009-11-19 17:29:41 +00:00
fros4943 4b775d3d47 removed some commands to make binary fit on sky platform 2009-11-14 11:31:28 +00:00
adamdunkels 3a6f44fb34 Updated to use the command line options 2009-11-04 07:48:37 +00:00
adamdunkels 51ecb15435 Example code for using the shell netperf command 2009-11-03 22:56:27 +00:00
adamdunkels 6a8443b46b Removed Rime ping command to save flash space, added the single-hop Rime debug commands instead 2009-10-27 14:13:30 +00:00
adamdunkels e14a30262c Updated the Rime channel numbers so that all examples can be run in the same network without channel clashes 2009-10-18 17:52:08 +00:00
adamdunkels f97cbce055 Added broadcast example for completeness 2009-10-18 17:49:24 +00:00
zhitao 30875da288 a little faster autoconfiguration 2009-10-16 15:13:25 +00:00
nvt-se 8d4021529c Added a generic file-upload command. shell-upload only takes .ce files. 2009-09-29 15:46:38 +00:00
nifi 6b60454f2d cleaned up error messages and break at first error 2009-09-21 14:14:46 +00:00
nvt-se f3e304ec40 Removed duplicate test return value. 2009-09-17 14:32:57 +00:00
zdshelby 83988ef554 - Removed rime_test from the Makefile 2009-09-09 07:34:53 +00:00
zdshelby 0e9220716e Initial commit of examples for the Sensinode/cc2430 platform. 2009-09-08 19:47:50 +00:00
nifi d4b619bcc5 Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430 2009-09-07 11:31:26 +00:00
nifi 6680d2c6c2 Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown. 2009-09-01 09:29:40 +00:00
dak664 ed9d31ef7c Add documentation 2009-07-23 23:51:36 +00:00
dak664 42a9e1e2e0 Add Huginn and Muninn web content 2009-07-23 16:21:56 +00:00
dak664 c1b7375a5a *** empty log message *** 2009-07-23 16:13:48 +00:00
dak664 e0138add63 Remove signature bytes from hex file 2009-07-08 21:46:13 +00:00
dak664 49989dbe45 Add rf230bb radio driver with conditional make on RF230BB=1 2009-07-08 15:26:17 +00:00
nifi 89ce58f576 fixed debug output to show the correct remote address 2009-06-29 12:31:03 +00:00
nifi 74ccc5a732 replaced DEFAULT_TARGET with Makefile.target for specifying default target 2009-06-26 12:11:26 +00:00
nifi f0a3477dd2 replaced DEFAULT_TARGET with Makefile.target for specifying default target 2009-06-26 12:04:46 +00:00
fros4943 501416fca0 disabled rime commands to decrease rom usage 2009-06-26 09:51:18 +00:00
joxe 3b97f72c0c added makefile with saved target 2009-06-23 21:03:13 +00:00
dak664 728c482cc3 remove .fuse section from hex file, add mcu 2009-06-19 18:46:41 +00:00
adamdunkels 617eae6ca1 Removed the debug and sniff commands to make code size smaller so that the compiled binary fits in ROM 2009-06-18 09:01:16 +00:00
adamdunkels 4c22ef33d0 Moved compile-platforms from examples/ to tools/release-tools 2009-06-18 08:40:57 +00:00
fros4943 7741d58cdb minor fix: removed superfluous etimer_reset 2009-06-09 19:31:55 +00:00
fros4943 45e3b5a8b3 transmit with random intervals: 2-4 seconds 2009-06-09 09:27:03 +00:00
c_oflynn 0946203c57 Remove fuses from .hex, Pass MCU name to avr-size 2009-06-02 21:58:32 +00:00
nvt-se f115894193 switched to larger type size for the file size. 
use AND on characters read back since the file size is larger than 255 bytes.
 2009-05-26 13:48:32 +00:00
adamdunkels 7bd7cd64b3 Rewrote the webserver so that sensor data is loaded using Ajax-style XmlHttpRequest and that a spinner icon is shown when the data is loaded 2009-05-11 17:38:29 +00:00
adamdunkels e6d2fada05 Added the tweet command 2009-05-11 17:37:15 +00:00
adamdunkels d1b97feb88 Added a telnet server with Twitter commands 2009-05-11 17:36:13 +00:00
adamdunkels 381beac299 Code style fixes 2009-05-06 15:03:49 +00:00
nvt-se 3eac697f85 fixed a compiler warning by providing an int type of the argument to 
printf, as specified by the format.
 2009-05-04 22:09:52 +00:00
joxe eec984dfe3 minor bugfix - added process_pause 2009-04-25 22:38:00 +00:00
joxe 889a2bb024 minor improvements 2009-04-25 10:21:51 +00:00
joxe 19a30284e5 fixed minor bug in viewer 2009-04-25 10:04:38 +00:00
joxe d8d7e9142d added a hi-res RSSI scanner and viewer for sky/jcreate 2009-04-25 09:41:37 +00:00
fros4943 0d82fcb143 contiki shell example with only platform independent commands 2009-04-23 08:42:07 +00:00
fros4943 71c3c8e86c enabled download and sendcmd commands + cleanup 2009-04-20 13:08:56 +00:00
nvt-se d86ee2c665 changed address setup slightly. 2009-04-10 16:51:16 +00:00
nvt-se 73d5025e04 changed udp examples into a client and a server, added multi-hop routing, 
clarified the code.
 2009-04-09 21:35:38 +00:00
nvt-se 2eaec8d38a print the file version more seldom. 2009-04-07 15:14:17 +00:00
nvt-se d936dc1d09 print the time of the test. 2009-04-03 11:12:17 +00:00
nvt-se ca617f5559 updated the documentation. 2009-04-02 10:35:08 +00:00
fros4943 4706ddf023 exec shell command and elfloader example 2009-03-26 12:46:19 +00:00
adamdunkels ebbae099ce A program that displays the number of neighbors on the JCreate LEDs 2009-03-24 19:45:46 +00:00
adamdunkels d0b969ec5a Rewrote the multihop example to better show how to use the multihop layer. Now also shows how to use the memb, list, and annoncement mechanisms. 2009-03-23 18:10:09 +00:00
adamdunkels 61d33173a3 Renamed the serial module to serial-line 2009-03-18 07:20:18 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
zhitao 77c8524aa5 wait until rime finishes forwarding to send 2009-03-10 14:36:48 +00:00
adamdunkels 151853ca37 Added example announcement code 2009-03-08 20:27:42 +00:00
fros4943 659c7e7311 added webserver-nogui source and WITH_NULLMAC to example code (too large otherwise) 2009-03-03 17:25:33 +00:00
fros4943 6c1207c5d5 updated runicast example: added sender history to detect duplicate callbacks 2009-03-03 12:28:39 +00:00
oliverschmidt b4d6dd6893 Added webserver and irc. 2009-03-01 23:37:49 +00:00
nvt-se 75d8c75768 use more suitable process name. 2009-02-27 19:32:28 +00:00
nvt-se a0226e2418 switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET) 2009-02-27 14:28:02 +00:00
fros4943 a6fc125b64 printing local ipv6 address at startup. addresses must match in order for the examples to work 2009-02-26 09:02:09 +00:00
nvt-se 31bc37a043 Added Deluge and tests for it. 2009-02-25 17:00:00 +00:00
fros4943 90767a76b3 moved ipv6 udp example processes from apps/udp to inside examples/udp-receiver-ipv6 and examples/udp-sender-ipv6 
* transmitting human readable strings between the two processes
* remote address configurable at compile time via DEFINES=...
 2009-02-25 12:11:17 +00:00
fros4943 cb56161c94 moved ipv6 udp example processes from apps/udp to inside examples/udp-receiver-ipv6 and examples/udp-sender-ipv6 2009-02-25 12:10:10 +00:00
nvt-se 3f71499c96 format first to get deterministic results. 2009-02-22 15:17:36 +00:00
nvt-se a2d651af72 seek test (-25) failed sometimes because it assumed a default file size of 8kb. reserve the file instead so the default doesn't matter. 2009-02-17 15:08:01 +00:00
fros4943 ab61e8b8b5 bugfix: including random.h to avoid random_rand() assumed signed, and timer intervals becoming very very small 2009-02-17 08:44:44 +00:00
adamdunkels 0d699abe79 Disabled checkpointing for the default sky-shell build to reduce object code size, instead added a separate sky-checkpoint build with checkpointing but without the 'sky-alldata' command 2009-02-14 22:53:00 +00:00
adamdunkels 585620c102 Reverted the recent change from random_rand() to rand(). It turned out that 
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
 2009-02-11 11:08:53 +00:00
adamdunkels 9c4d2da561 Bugfix: it is etimer_reset() that makes timer behavior stable, not etimer_restart() 2009-02-07 22:38:01 +00:00
adamdunkels 67f649c4aa Use etimer_restart() to avoid synchronization effects from the abc_send() invocation taking time to complete 2009-02-07 22:28:25 +00:00
adamdunkels c10ae7b6dc Increased the inter-packet time to work better on the sky platform 2009-02-07 16:17:33 +00:00
adamdunkels 2e55bb5151 Removed the blink process to make the code simpler, added randomness to the transmission intervals 2009-02-06 10:12:52 +00:00
fros4943 1795dbf199 added checkpoint and rollback commands: 
writes/reads checkpoint images from file system.

(temporarily disabled rime debug and sniff commands)
 2009-02-04 17:54:28 +00:00
julienabeille 2218d8ef8b Added an application and example to run IPSo interoperability test using RAVEN boards 2009-01-27 10:57:28 +00:00
nifi 4eebe9afd9 Updated to match new mesh API. Thanks to Carlo Alberto Boano for fixing. 2009-01-19 13:24:42 +00:00
nifi 677dd296a6 Updated to match new multihop API. Thanks to Carlo Alberto Boano for fixing. 2009-01-16 17:40:16 +00:00
adamdunkels fdf5836763 Example shell for the Sentilla JCreate 2009-01-15 22:11:58 +00:00
fros4943 008d4ba33f sky example running both webserver and serial shell (overrides default slip handler) 2009-01-15 13:18:19 +00:00
nifi 0371d20a40 updated for new rimeaddr API 2008-12-16 17:05:14 +00:00
nifi 52c2f23e28 CLOCK_CONF_SECOND must be a power of two for MSP430 platforms (see cpu/msp430/clock.c for details) 2008-12-16 16:53:04 +00:00
nvt-se 747d27ecda updated cooja/mspsim test for coffee. now with GC 2008-12-12 13:24:42 +00:00
nvt-se 1f03e79a89 added a simple garbage collection test. 2008-12-12 10:28:11 +00:00
adamdunkels f0f9314e7e Reversed byte order to match the old ->u16 approach to make the automated tests & scripts work again 2008-12-02 08:09:46 +00:00
adamdunkels c0ce2efd89 Removed the rimeaddr ->u16 field 2008-12-01 15:19:11 +00:00
adamdunkels a847ff738d Removed reliance on the ->u16 field in rimeaddr 2008-12-01 14:17:36 +00:00
adamdunkels 33bf01534c Rewrote code that used the old ->u16 field in rimeaddr_t to access Rime addresses to use rimeaddr_copy() and the ->u8 field instead 2008-11-30 18:36:55 +00:00
nifi 1865f13f3a fixed more robust parsing 2008-11-26 14:22:54 +00:00
nvt-se 1a87d5a661 use new remove function name. 2008-11-24 10:59:40 +00:00
fros4943 a02a2e998a added sky support for multi-threading example 2008-11-21 10:36:16 +00:00
oliverschmidt 7cf3165155 Replaced NETSIM macro with general (and now actually working) solution in Makefile.include. 2008-11-17 22:52:10 +00:00
nvt-se 636bf70a8c added append test. 2008-11-13 14:46:50 +00:00
fros4943 3033201d24 longer send period + forcing example to wait until an ongoing transmission is finished before initiating a new transmission 2008-11-11 13:50:21 +00:00
fros4943 92ecda2202 using the same addresses in both netsim and non-netsim 2008-11-11 11:25:39 +00:00
oliverschmidt 57f8e86532 Minor formatting change. 2008-11-10 22:47:10 +00:00
oliverschmidt c109e102c4 Include wget shell command in "standard" shell environments. 2008-11-10 22:10:32 +00:00
adamdunkels de601c9523 Added battery voltage level readout & SHT11 low-voltage indicator 2008-11-10 21:14:20 +00:00
adamdunkels 5e772838eb Remove debug printouts. Increase neighbor advertisement timers. 2008-11-06 08:24:20 +00:00
adamdunkels 2ac1c3e231 avr-raven needs to be built with uIPv6 - this should hopefully fix the nightly builds 2008-10-30 21:28:20 +00:00
adamdunkels de084cecfb Corrected mistake in the avr makefile target 2008-10-17 20:23:32 +00:00
adamdunkels e3c1d488be Added avr-raven to compilation targets 2008-10-17 17:55:13 +00:00
nvt-se ea9c3ab98c allow in-page offets 2008-10-16 10:14:41 +00:00
c_oflynn 778f51f445 Change makefile to build with just 'make' 2008-10-15 20:52:03 +00:00
mdurvy 33f9b07915 warning for prefix lifetimes 2008-10-15 08:55:25 +00:00
c_oflynn 1726c10a46 Forgot these files! 2008-10-14 22:04:16 +00:00
c_oflynn d5865cb2b6 -Change needed for ravenusb to build 
-Reverts Makefile.include back to 1.57, then apply the needed change
 2008-10-14 20:31:46 +00:00
c_oflynn a520fe4646 Lots of changes / commits! This allows ravenusbstick example to build at least. 2008-10-14 19:06:51 +00:00
julienabeille 2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille f5f0044578 examples for uIPv6 2008-10-14 10:01:52 +00:00
fros4943 27bc3f771a printing message when packet sent 
+ changed period to 2 seconds (can be run unchanged with x-mac)
 2008-10-02 21:08:58 +00:00
nvt-se 3c5ed37751 basic tests of Coffee. 2008-09-18 10:35:30 +00:00
nifi 4206ff28a2 Fixed problem with programming Sky nodes using the Java interface under Linux 2008-09-03 13:35:21 +00:00
nifi 822726f817 Added system time when the sensordata is received at the base station and fixed sensor data log to be flushed. 2008-08-29 10:00:23 +00:00
nifi ec69c1c825 Added menu option to send init script to nodes. Added charts 'Average Power' and 'Average Temperature'. Limited the number of displayed chart items to 250 in the time charts 2008-08-29 09:00:15 +00:00
nifi 71c219f5fc added option to limit the number of displayed chart items 2008-08-29 08:42:30 +00:00
nifi dbde68654a Only show nodes with sensor data by default 2008-08-28 07:32:24 +00:00
adamdunkels 9f9ba7d6d9 Added the 6502 targets to the default nightly build checks 2008-08-19 09:20:27 +00:00
oliverschmidt 59c5d05388 Presuming that all platforms based on a certain cpu should be listed here... 2008-08-17 09:56:58 +00:00
adamdunkels 96c47c8ef8 Prepared for automatic cc65 compilation 2008-08-16 13:08:36 +00:00
adamdunkels d0f8770263 Bugfix: dates are now correctly displayed. Capped humidity values at 100% 2008-08-15 18:47:13 +00:00
adamdunkels 46b824d80f Enable rime debug commands (broadcast, unicast) 2008-08-15 18:46:28 +00:00
adamdunkels 5991bc0d67 Milliseconds -> seconds 2008-07-10 20:05:09 +00:00
nifi c4b197a2a4 added option to program Sky nodes from the Java interface 2008-07-10 14:52:59 +00:00
nifi e75579623a setup library for tools 2008-07-10 00:23:30 +00:00
nifi 09197c7ad0 moved range configuration to initialization 2008-07-10 00:19:20 +00:00
nifi 5c37342e14 bug fix 2008-07-09 23:33:33 +00:00
nifi 0fa1ae0fce Java interface using the shell to collect and visualize sensor values from Sky nodes 2008-07-09 23:18:05 +00:00
nifi 551056f263 updated for the latest CC2420 api 2008-07-09 21:49:20 +00:00
adamdunkels d89256c272 Changed from shell app to serial-shell app 2008-07-09 20:57:58 +00:00
adamdunkels 329cea44d7 Replaced the sky-shell with the new sky-shell-collect and removed sky-shell-collect 2008-07-09 20:39:27 +00:00
nifi e92b7178b9 fixed compiler warning 2008-07-08 12:54:41 +00:00
adamdunkels 082efade5b Removed netfile command, added net debug commands 2008-07-07 23:45:35 +00:00
adamdunkels 10f3964be1 Added an AJAX-style web server app that continously updates a web page with data from the Tmote Sky on-board sensors 2008-07-07 23:42:32 +00:00
adamdunkels b88b231c62 Removed ps command to make code fit in memory 2008-07-04 00:01:06 +00:00
adamdunkels 93ce938d8d enable coffee code coffee and netcmd commands 2008-07-03 23:32:03 +00:00
adamdunkels aed5ea1720 Bugfix in netsend commands 2008-07-03 23:31:38 +00:00
adamdunkels 4687c2c948 Renamed Rime module mh to multihop 2008-07-03 22:36:02 +00:00
adamdunkels c2c3835110 Changed name of Rime module ruc to unicast 2008-07-03 21:52:25 +00:00
adamdunkels 8b91a56a4e Added target for sky-shell-collect.c data collection 2008-07-03 18:48:53 +00:00
adamdunkels 96fb8163e6 Shell program that sends a lot of data: sensor data, power data, neighbor data 2008-07-03 18:40:18 +00:00
adamdunkels da4803e4d4 Updated window title and heading 2008-07-02 14:12:48 +00:00
adamdunkels 66876625d4 Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*. 2008-07-02 09:05:40 +00:00
adamdunkels 1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
adamdunkels 63c620303a Changed the 'ibc' and 'uc' Rime modules into the more descriptive names 'broadcast' and 'unicast' 2008-06-26 11:19:22 +00:00
adamdunkels 61bd8009f1 Reverted mistake commit 2008-06-02 08:42:34 +00:00
adamdunkels 199a14150b Removed redundant targets 2008-05-29 20:30:44 +00:00
adamdunkels cbca96c545 Example code for multi-hop Tmote Sky telnet server and web server 2008-05-29 20:17:48 +00:00
oliverschmidt 4dcbc3273e Now that we started adding files to the CVS which are normally generated with a 'save...' make goal we can remove the DEFAULT_TARGET mechanism altogether and just add Makefile.target files. 2008-05-26 10:09:12 +00:00
oliverschmidt 1cab294517 The Contiki 2.x build system allows to define arbitrary macros for the C compiler preprocessor (in other word add -d<macro[=value]>'s to the C compiler command line) directly from the gnumake command line by setting the gnumake variable DEFINES to a comma-seperated list of macros (and optionally values) like this: 
make TARGET=mytarget DEFINES=MYLOG, MYSIZE=100, MYTRACE

The build system does however _NOT_ take care to rebuild things if the DEFINES change so most likely a 'make clean' is advisable. To ease usage the DEFINES may be saved individually per target with the goal 'savedefines' similiar to savinf the target.

The 6502-based target leverage the DEFINES mechanism by introducing so-called 'high level config macros' which allow to configure Contiki per target AND per project.

Most of the time there's exactly one reasonable set of high level config macros for every combination of target and project. Therefore it makes sense to place them into CVS.
 2008-05-26 09:28:28 +00:00
oliverschmidt 8248685dcf Not all targets support stdio. There I replaced stdio output with log output (and streamlined the source). 2008-05-26 09:12:22 +00:00
oliverschmidt b2810f02e1 Many project Makefiles build just one Contiki binary. Up to now the name of this binary was only available to the 'all' goal as prerequisite. So it was possible to create a non-project-specific rule to i.e. load that binary into the target device. 
Therefore I introduced the make variable CONTIKI_PROJECT. Now a typical project Makefile starts with:

CONTIKI_PROJECT = hello-world
all: $(CONTIKI_PROJECT)
 2008-05-26 07:37:24 +00:00
oliverschmidt ad7ad61482 Added some sample content for the webserver example using CFS. 2008-05-21 07:43:53 +00:00
joxe 7722a73abf modified API for fft 2008-04-25 22:12:25 +00:00
joxe faf0f2ea0a added fft test program sampling using the esb-mic. 2008-04-25 16:34:31 +00:00
fros4943 e9f8102fec added netsim address style support 2008-04-24 11:50:04 +00:00
fros4943 01fba84c16 sending from node 2 to node 1 2008-04-24 11:41:50 +00:00
zhitao 23d437e656 synched with the new mac->off function parameter 2008-04-16 10:49:50 +00:00
oliverschmidt 12f6b3c206 Removing (the now obsolete) tcpip_set_forwarding(0) shouldn't hurt. 2008-03-29 15:20:48 +00:00
oliverschmidt 0fc8481f15 As adding some commands to the telnet server shell doesn't seem to be desirable in the application it's now done in the example. 2008-02-28 23:12:47 +00:00
thiemovoigt f464ae3cc4 update to conform to newer Contiki, in particular set_channel stuff 2008-02-25 12:04:41 +00:00
thiemovoigt b79cb25ccd update to conform to newer Contiki, i.e. set_channel for radio 2008-02-25 12:03:25 +00:00
adamdunkels 8f6d2d6c3f Added simple-cc2420 include, added argument to mac->off() 2008-02-24 22:27:41 +00:00
adamdunkels ad2a8e5e97 Changed all occurences of u8_t and u16_t to uint8_t and uint16_t 2008-02-24 22:15:46 +00:00
adamdunkels 17f13e38e8 TCP/IP-networking examples for the Tmote Sky platform 2008-02-24 21:33:57 +00:00
oliverschmidt 2632f8f937 Removed finally unnecessary cast. 2008-02-10 22:36:36 +00:00
adamdunkels 136ad1e48c Example application that runs the Contiki shell on the Tmote Sky 2008-02-04 23:52:33 +00:00
adamdunkels 44d7d9a9a4 Changed names of the Rime examples from test-* to example-* and added examples for ruc and uc 2008-01-25 18:00:50 +00:00
adamdunkels 68523814c5 Moved from examples/sky into generic platform/sky/apps so that all examples can use it 2008-01-23 20:34:37 +00:00
zhitao 10ce1ed03e Pulled in updated defines for the sky platform 2008-01-22 15:00:24 +00:00
zhitao b9c34bf835 Removed redundant initialization 2008-01-22 14:58:41 +00:00
nifi 3739cd8eea corrected comment 2008-01-10 13:40:20 +00:00
nifi 75784e2314 simple application to indicate connectivity between two nodes 2008-01-10 09:59:33 +00:00
adamdunkels df9d43c62d Fixes to total power plot generation 2008-01-08 08:28:09 +00:00
adamdunkels ff42002bc5 Added extraction of power data (not just energy) 2008-01-08 08:07:23 +00:00
adamdunkels bfd894c7bd Made graphs nicer by using gnuplot's mulitplot functionality, added power graph 2008-01-08 08:06:41 +00:00
adamdunkels 12bbe80003 Added timestamps and radio signal noise measurements 2008-01-08 08:05:34 +00:00
adamdunkels b71224b438 tree.h -> collect.h 2007-12-16 14:37:02 +00:00
oliverschmidt 4ffca4c3b8 Introduced web browser as new example using ctk fullscreen mode. 2007-12-15 22:05:34 +00:00
nifi a8313c3b39 removed unused include 2007-11-29 10:29:03 +00:00
nifi 242c88497a Rime port of the radio test 2007-11-28 23:10:38 +00:00
nifi 1c5fd0aa86 fixed compiler warning 2007-11-28 20:31:30 +00:00
nifi 1c7c74a6ad replaced blink with blinker that uses more sensors 2007-11-28 20:28:56 +00:00
adamdunkels 20cab2ba22 Print out system and c compiler version 2007-11-28 20:05:51 +00:00
adamdunkels 8d96443a3b A set of scripts for producing plots from the output of the sky-collect program 2007-11-28 16:56:37 +00:00
adamdunkels 1b659316b7 Updated to use the 'collect' module instead of the old 'tree' module 2007-11-28 16:52:22 +00:00
adamdunkels 6dfeb266ff Fixed to use the 'collect' module instead of the 'tree' module 2007-11-28 16:05:32 +00:00
adamdunkels 13ca6c9946 It now says if it succeeded as well as failed 2007-11-28 12:53:39 +00:00
nifi 8cf6ac9212 ESB examples 2007-11-27 22:32:38 +00:00
adamdunkels 0074e4248b Fixed problem that made error output not visible 2007-11-27 21:58:07 +00:00
adamdunkels 64a2602183 Makefile for compiling a set of Contiki platforms and produce error messages for those platforms that do not compile 2007-11-27 20:50:54 +00:00
adamdunkels a677abb6b1 Fixed compiler warning 2007-11-26 23:36:09 +00:00
adamdunkels 4edbad10a7 Fixed so that it runs with multiple Tmote Sky boards attached; it now uses the first one 2007-11-26 23:34:52 +00:00
adamdunkels 99f1aa9238 Added upload and rundemo targets, removed obsoleted %.upload target 2007-11-26 23:32:32 +00:00
adamdunkels 85c75d18fb Added rt-leds and sky-treeroute ass default compile targets, removed tcprudolph0 as it currently does not compile due to memory exhaustion 2007-11-26 23:25:35 +00:00
adamdunkels efe0306687 Removed dependency on PIR sensor 2007-11-26 23:24:33 +00:00
nifi f0a901fc7c fixed compiler warnings 2007-11-26 21:58:51 +00:00
adamdunkels 33d7c0badd Fixed compiler warnings to make code compile with gcc's -pedantic switch 2007-11-17 18:16:48 +00:00
adamdunkels 1e1e44a3f8 Fixed compiler warnings to make code compile with gcc's -pedantic switch 2007-11-17 18:01:00 +00:00
adamdunkels 75a1cb72f8 Fixed compiler warnings 2007-11-17 10:28:49 +00:00
nifi a6d827fa1f moved initialization of ctimer to allow MAC layer to use ctimers 2007-11-15 13:07:42 +00:00
adamdunkels 8961ec7ef8 Updated to send much more statistics than before: energy estimates, rime statistics, neighbor statistics 2007-11-13 21:09:14 +00:00
adamdunkels da045911eb Added serialdump target that prints the output of the first Tmote Sky to a file 2007-11-13 21:03:27 +00:00
adamdunkels 508c258cb7 Copy README file to zipfile too 2007-11-12 22:30:33 +00:00
adamdunkels b5241dc609 Updated instructions 2007-11-06 19:57:41 +00:00
adamdunkels 5a544c2c8a Increased sleep time 2007-11-06 19:57:10 +00:00
adamdunkels f2434b53be Updated makefiles and paths to make a .zip file with demo contents 2007-11-06 14:46:12 +00:00
fros4943 6b6a911185 added jar target 2007-11-01 17:34:36 +00:00
fros4943 8e3294c7d5 final versions 2007-11-01 17:33:16 +00:00
fros4943 37bf441e40 energy demo poster 2007-10-30 08:44:46 +00:00
adamdunkels 131e922020 Added heading, Contiki URL; fixed serialdump path; minor fixes 2007-10-25 18:43:18 +00:00
adamdunkels a31cd7649d Contiki energy estimation demo for ACM SenSys 2007 2007-10-25 13:04:01 +00:00
adamdunkels 11a80b85ec Contiki energy estimation demo for ACM SenSys 2007 2007-10-25 12:56:28 +00:00
adamdunkels b96f9cb553 Makefile that produces a bunch of .ihex files for burning node IDs into Tmote Sky nodes 2007-10-25 12:07:17 +00:00
adamdunkels 6c241b9f2b Program for testing the Rime reliable unicast bulk transfer protocol 2007-09-27 22:21:27 +00:00
nvt-se 077fc61084 Static should come first because it's a storage class. 2007-09-14 20:07:26 +00:00
oliverschmidt f8bf3e1428 Fixed buffer overflow. 2007-08-10 10:33:28 +00:00
oliverschmidt 7f7f11d30f Set default target to minimal-net. 2007-05-26 22:42:02 +00:00
adamdunkels 2c446cb921 Added SHT11 readings, a lot of other stuff 2007-05-22 21:05:09 +00:00
adamdunkels 7eea8062e0 Try sending every packet 10 times at most 2007-05-22 21:04:34 +00:00
adamdunkels eefed6abbe Removed bad include cfs/cfs-ram.h 2007-05-22 21:04:19 +00:00
adamdunkels 0db074ae29 Renamed uabc to polite 2007-05-22 21:04:00 +00:00
oliverschmidt 9f97290665 Changed Contiki File System (cfs) from a service to a plain library. 
This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.
 2007-05-19 21:05:48 +00:00
adamdunkels 940da856de Bugfixes, updates 2007-05-15 08:09:21 +00:00
oliverschmidt a07a39d3c2 Allow to easily build the webserver example with cfs support by running make with the parameter HTTPD-CFS=1. 2007-04-23 23:30:14 +00:00
oliverschmidt 91710dd48f Minor adjustment to coding style. 2007-04-04 17:41:28 +00:00
oliverschmidt f1d9702b68 Added an example application to show the usage of the Contiki Multi-threading library. 2007-04-03 20:13:27 +00:00
adamdunkels 1e950af492 Test program that blinks LEDs using the rtimer real-time timers 2007-04-03 19:02:27 +00:00
adamdunkels d7a2317e33 Header already reduced 2007-04-02 20:02:23 +00:00
adamdunkels 836552a742 API fixes 2007-04-02 20:02:13 +00:00
adamdunkels 35957aa600 Removed unused button code 2007-04-02 18:06:35 +00:00
adamdunkels d7982e41c9 Added percentage output in netsim 2007-04-02 17:51:54 +00:00
adamdunkels 2f50533d30 Added LED output that shows when a file has been completely downloaded 2007-04-02 10:04:37 +00:00
adamdunkels e924c41a3b Added more printouts 2007-03-31 18:43:45 +00:00
adamdunkels ce53fdd7f4 Now prints out sensor data 2007-03-31 18:41:13 +00:00
adamdunkels b2227d6a8c Added default netsim target 2007-03-29 23:50:51 +00:00
adamdunkels af60193256 Treeroute for Sky 2007-03-27 10:39:30 +00:00
adamdunkels 0d7af38ae5 Make sure psock is included in core 2007-03-25 21:53:08 +00:00
adamdunkels 48f467a685 Bug fixes: no clock tick when interrupts turned off, need to artifically trigger after ELF loading 2007-03-25 21:45:32 +00:00
adamdunkels 2114e7f847 Rudolph now in core Rime 2007-03-25 12:15:09 +00:00
adamdunkels 579fcb5190 Include path 2007-03-25 12:14:21 +00:00
adamdunkels 4e5a47aec4 Make LEDs blink when data is received 2007-03-25 12:13:27 +00:00
adamdunkels 0c0d823dbf Typo 2007-03-25 12:13:04 +00:00
adamdunkels c3457e82a4 Added exithandlers so that the examples can be run as loadable (and unloadble) modules 2007-03-25 12:10:29 +00:00
nifi a12359cb5d Makefile with default TARGET sky for the sky examples 2007-03-23 15:03:00 +00:00
adamdunkels b56cc3d077 Test file for CFS driver 2007-03-23 12:17:28 +00:00
adamdunkels a2c3501728 Testing the button 2007-03-23 00:06:12 +00:00
adamdunkels 757a226e39 Blinking LEDs 2007-03-23 00:05:52 +00:00
adamdunkels 68506272dc Program for loading an ELF file over TCP and Rudolph0:ing it out into the air 2007-03-23 00:03:25 +00:00
adamdunkels 00bd901d25 Message size should include ending zero byte 2007-03-22 23:58:37 +00:00
adamdunkels dd276a9c8a Removed the use of CFS. Instead, provide callbacks for the using application to fill in data. 2007-03-22 23:54:40 +00:00
adamdunkels b731014bc0 Updated for the new APIs 2007-03-22 19:03:56 +00:00
adamdunkels 790d4ba24d Added rudolph tests 2007-03-21 23:24:24 +00:00
adamdunkels 5c6c6e3358 Added configurable interval 2007-03-21 23:23:02 +00:00
adamdunkels 404c2cc0a3 Moved all Rime examples into examples/rime directory 2007-03-20 12:21:17 +00:00
adamdunkels 43326b5ae6 API change for Rime: *_setup() renamed to *_open() 2007-03-19 19:24:36 +00:00
adamdunkels 7b924672bd Simple Rime test code 2007-03-15 22:11:11 +00:00
adamdunkels fa66c652cd Example showing how to use the mesh routing code in Rime 2007-03-15 22:06:19 +00:00
adamdunkels 8b9ba9931b Example showing how to use the tree routing code in Rime 2007-03-15 22:03:58 +00:00
oliverschmidt 7168278a89 Adding 'APPS+=program-handler' in apps/Makefile.telnetd might be considered more consistent but I opted for this more obvious approach. BTW yet another example that from my perspective simply can't have worked... 2007-03-03 13:32:10 +00:00
adamdunkels 5a7034fe5d A really simple Contiki program, intended to show how the build system works and how to write simple Contiki programs 2006-10-02 21:46:46 +00:00
bg- 9009d8dc06 More uip_ipaddr_t fixes. 2006-08-10 19:22:23 +00:00
adamdunkels ade5db05f5 Removed unneeded target 2006-06-17 22:53:09 +00:00
adamdunkels c9e808d638 Import of the contiki-2.x development code from the SICS internal CVS server 2006-06-17 22:41:10 +00:00