deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
9935 commits 6 branches 13 tags 80 MiB
Commit graph

1208 commits

Author SHA1 Message Date
George Oikonomou 460d5bcb5d Fix cc2530 UART1 init bug 
Fixes #286
 2013-08-09 16:09:12 +01:00
George Oikonomou cb075dec65 Disable SDCC warnings 110 and 126 
Those two warnings are optimisation-related
* 110 warns that an always-false if branch has been optimised out
* 126 warns about unreachable code which also gets optimised out

In disabling those warnings, we make the build less cluttered
 2013-08-09 15:57:49 +01:00
George Oikonomou 20f06e3271 Support verbosity control for 8051-based platforms 2013-08-09 15:57:21 +01:00
George Oikonomou c89450a233 Change to sdar from the now deprecated sdcclib 2013-08-09 15:56:16 +01:00
George Oikonomou b025759665 Don't redirect sdld output to dev/null 
This was used in the past because sdld was
very verbose when linking banked hex files. New
sdld versions do not exhibit this level of
verbosity and therefore the redirect can be
stopped
 2013-08-09 15:56:15 +01:00
George Oikonomou 1b0470687b Change the cc2531 usb stick descriptor 
The CC2531 USB stick now identifies itself as a
'Texas Instruments CC2531 USB Dongle' and uses a
TI-assigmed VID:PID. The VID:PID is now configurable
in contiki- or project-conf.h
 2013-08-09 15:51:58 +01:00
George Oikonomou 0a7094bc39 Remove leftover make targets 
The sensinode platform does not support .upload and .serialdump
Their presence in the makefile has confused in the past confused
some users. This commit removes them

The commit also removes the $(OBJECTDIR)/%.rel: %.cS recipe which
is not used by either 8051 platform and is probably broken anyway,
since it has been unmaintained for years
 2013-08-09 15:48:05 +01:00
George Oikonomou 6c6013b898 Make the CC2538 UART driver more configurable 
* We can now very easily switch between UART0 and UART1 through a define
* We can also configure the UART RX and TX port/pin through defines
 2013-08-09 12:20:25 +01:00
George Oikonomou c3b5d4f5e3 Add support for verbosity control 2013-08-07 15:26:22 +01:00
Nicolas Tsiftes a9f0907640 Merge pull request #304 from frtos-wpan/rf230bb-merged 
cpu/avr/radio/rf230bb/rf230bb.c (rf230_transmit): extend comment on tx s...
 2013-08-05 00:24:35 -07:00
Oliver Schmidt 6ab336f55f Several minor consistency improvements. 2013-07-31 00:55:31 +02:00
Oliver Schmidt 3c6c7381d8 Suppress some usual warnings. 2013-07-31 00:29:52 +02:00
Oliver Schmidt 8d23d1b0bb Support the recently added verbosity control. 2013-07-31 00:15:38 +02:00
Oliver Schmidt 116c3f119b unistd.h doesn't seem to be necessary but breaks the MS VC build. 2013-07-31 00:02:29 +02:00
Werner Almesberger be0a296049 cpu/avr/radio/rf230bb/rf230bb.c (rf230_transmit): extend comment on tx sequence 
Explain that the transmission is intentionally started before copying the
frame to the buffer.
 2013-07-28 18:43:29 -03:00
Mariano Alvira 5d19de3dbf Merge pull request #266 from ismb-pert/fix-mbxxx 
mb851 platform is now the more generic mbxxx. STM32W_CPUREV environment variable is used to select the variant of STM32W to use.
 2013-07-26 07:38:11 -07:00
stefano pascali 36e7db42de Some little refactor 2013-07-19 16:15:55 +02:00
stefano pascali b43ce0f677 Travis-ci tweaks, added CPUREV to 01 regression test, needed by mbxxx platform 2013-07-12 17:07:04 +02:00
stefano pascali fcb09d5d30 Fixed mbxxx platform 2013-07-11 17:56:17 +02:00
Mariano Alvira 6307f3ff95 mc1322x: make uart buffer sizes configurable from contiki-conf.h 2013-07-04 14:09:40 -04:00
Oliver Schmidt ad34b714cd Merge pull request #287 from oliverschmidt/master 
The current cc65 build doesn't require this workaround anymore.
 2013-06-27 15:38:48 -07:00
Oliver Schmidt fb1de74dc4 The current cc65 build doesn't require this workaround anymore. 2013-06-28 00:36:33 +02:00
Peter A. Bigot 5fc0575e99 Makefile.include: support make clean all 
Historically $(OBJECTDIR) was created when Makefile.include is read.  A
consequence is that combining "clean" with "all" (or any other build
target) results in an error because the clean removes the object
directory that is required to exist when building dependencies.
Creating $(OBJECTDIR) on-demand ensures it is present when needed.

Removed creation of $(OBJECTDIR) on initial read, and added an order-only
dependency forcing its creation all Makefile* rules where the target is
explicitly or implicitly in $(OBJECTDIR).
 2013-06-20 17:45:41 -05:00
Oliver Schmidt 79bb5ea73f Removed some more old RCS tags from the Contiki source tree. 2013-06-13 15:54:26 +02:00
Oliver Schmidt cbce31cb59 Another small addition for platform 'Atari XL'. 2013-06-02 23:36:28 +02:00
Robert Quattlebaum 36fbbe48aa Merge pull request #244 from darconeous/pull-requests/cpu-native-tapdev-ipv6-fix 
native/net/tapdev: Fix for new `UIP_CONF_IPV6` handling.
 2013-05-21 17:42:44 -07:00
Nicolas Tsiftes a445c4020d Merge pull request #153 from darconeous/pull-requests/cpu-avr-bootloader 
avr/bootloader.c: Now compatible with bootloaders which always run first
 2013-05-20 05:49:13 -07:00
Robert Quattlebaum 09eec82d08 Merge pull request #134 from darconeous/pull-requests/cpu-avr-avrdude-mcu 
cpu/avr: Added "AVRDUDE_MCU" configuration parameter.
 2013-05-19 17:35:26 -07:00
Robert Quattlebaum 9c70e0e5cc native/net/tapdev: Fix for new UIP_CONF_IPV6 handling. 2013-05-19 17:27:30 -07:00
Robert Quattlebaum 674f70b6c3 cpu/avr: Added "AVRDUDE_MCU" configuration parameter. 2013-05-19 14:23:31 -07:00
Adam Dunkels aaac20a950 Merge pull request #225 from tecip-nes/pic32_minor_reorganization 
Pic32 minor reorganization
 2013-05-19 14:22:14 -07:00
Robert Quattlebaum 9c17a542a7 avr/bootloader.c: Now compatible with bootloaders which always run first. 
The boot loader now knows when to go into bootstrap mode by
looking for a specific EEPROM value. Also updated code style
to match Contiki code style guidelines.
 2013-05-19 08:21:16 -07:00
Robert Quattlebaum 535e90343c Merge pull request #144 from darconeous/pull-requests/settings-for-all-targets 
core/lib/settings: Generalized settings manager to work on any platform
 2013-05-18 12:03:09 -07:00
Robert Quattlebaum b8c0f2de6c cpu/native: Add file-backed simulated EEPROM to native cpu. 
This patch removes a defunct EEPROM implementation from the native
platform and provides a new EEPROM implementation for the native cpu.
The previous implementation appears to be vestigal.

This is useful for testing code which uses the EEPROM without running
the code on the actual hardware.

By default the code will create a new temporary file as the EEPROM
backing, reinitializing each time. If you would like to preserve the
EEPROM contents or specify a specific EEPROM file to use, you can set the
`CONTIKI_EEPROM` environment variable to the name of the EEPROM file you
wish to use instead. If it already exists, its contents will be used.
If it does not already exist, it will be created and initialized by
filling it with `0xFF`---just like a real EEPROM.

A new example is also included, which was used to verify the correctness
of the implementation. It can easily be used to verify the EEPROM
implementations of other targets.
 2013-05-18 10:29:41 -07:00
Giovanni evilaliv3 Pellerano c33d51e762 pic32 minor cleanups 2013-05-17 14:32:39 +02:00
Adam Dunkels 59a8df14a8 Merge pull request #189 from sieben/markdown 
Update to markdown
 2013-05-16 00:24:25 -07:00
François Revol 7967779e6c tapdev: Fix using an uninitialized buffer 2013-04-20 14:42:19 +02:00
George Oikonomou 704309cfd4 Change the InfoPage Location of the IEEE address 2013-04-17 15:44:01 +01:00
George Oikonomou 8b5b2bd4d8 CC2538 Documentation typo and grammar fixes 2013-04-17 15:41:41 +01:00
George Oikonomou 007e113ea9 Improve handling of CDC ACM line state 
- For the CC2538, simplify handling of USB_CDC_ACM_LINE_STATE
  events. Ignore the Carrier Control (RTS) bit when receiving
  a SET_CONTROL_LINE _STATE request, we are a full duplex device.
- Improve behaviour of the CC2531 USB stick when there is no
  process on the host to read IN data. Basically, we adopt the
  CC2538 approach and we only send data when a DTE is present
 2013-04-16 15:49:05 +01:00
George Oikonomou 40f49948e6 New Platform: TI CC2538 Development Kit 
This commit adds cpu, platform and example files,
providing support for running Contiki on TI's cc2538 DK
 2013-04-06 21:07:31 +01:00
Rémy Léone e6bd4f1dde Rename to md 2013-03-26 23:15:37 +01:00
Rémy Léone 7b40a568a6 Update to markdown 
- Spellchecking
- Update plain text to github markdown
 2013-03-26 16:55:19 +01:00
Robert Quattlebaum 28a1e40ebd core/lib/settings: Generalized Settings Manager to work on any platform 
This commit moves the Settings Manager from the AVR codebase
into the Contiki core library. Any platform that implements
the Contiki EEPROM API can now use the Settings Manager's
key-value store for storing their persistent configuration info.

The Settings Manager is a EEPROM-based key-value store. Keys
are 16-bit integers and values may be up to 16,383 bytes long.
It is intended to be used to store configuration-related information,
like network settings, radio channels, etc.

 * Robust data format which requires no initialization.
 * Supports multiple values with the same key.
 * Data can be appended without erasing EEPROM.
 * Max size of settings data can be easily increased in the future,
   as long as it doesn't overlap with application data.

The format was inspired by the [OLPC manufacturing data format][].

Since the beginning of EEPROM often contains application-specific
information, the best place to store settings is at the end of EEPROM
(the "top"). Because we are starting at the end of EEPROM, it makes
sense to grow the list of key-value pairs downward, toward the start of
EEPROM.

Each key-value pair is stored in memory in the following format:

Order    | Size     | Name         | Description
--------:|---------:|--------------|-------------------------------
       0 |        2 | `key`        | 16-bit key
      -2 |        1 | `size_check` | One's-complement of next byte
      -3 |   1 or 2 | `size`       | The size of `value`, in bytes
-4 or -5 | variable | `value`      | Value associated with `key`

The end of the key-value pairs is denoted by the first invalid entry.
An invalid entry has any of the following attributes:

 * The `size_check` byte doesn't match the one's compliment of the
   `size` byte (or `size_low` byte).
 * The key has a value of 0x0000.

[OLPC manufacturing data format]: http://wiki.laptop.org/go/Manufacturing_data
 2013-03-20 11:57:13 -07:00
Oliver Schmidt 6ba28bf74f Merge pull request #180 from mmuman/cleanup-and-fixes 
Cleanup and fixes
 2013-03-20 02:37:24 -07:00
François Revol 22bcb07c61 tapdev: Log to stderr; add tracing 
Use stderr for logging to avoid polluting stdout.
Add some DEBUG tracing.
 2013-03-19 19:41:20 +01:00
Adam Dunkels a5046e83c7 Cleanup and refactoring of the STM32w port 
This is a general cleanup of things like code style issues and code structure of the STM32w port to make it more like the rest of Contiki is structured.
 2013-03-18 13:31:26 +01:00
RongHQ 12b3d02ba1 Fix a syntax error in /cpu/cc253x/dev/uart0.c 2013-03-16 19:41:42 +08:00
Oliver Schmidt a0e2120fdb Added configurations of the new resolver. 2013-03-14 23:17:59 +01:00
George Oikonomou cc37a1e46e Fix cc2530 DMA priority define values 
Fixes #156
 2013-03-12 15:39:59 +00:00
Adam Dunkels 39e5a8c6dc Merge pull request #80 from darconeous/mdns-resolv 
Adds IPv6 and MDNS domain name resolution.
 2013-03-10 12:58:39 -07:00
Adam Dunkels c7ef7198a8 Merge pull request #85 from darconeous/native-target-osx 
Various updates to the minimal-net platform.
 2013-03-10 12:48:07 -07:00
Robert Quattlebaum 1d113f52ad core/net/uip: Rename uip_ethaddr to uip_lladdr. 
There isn't really a good reason I can think of for these
to be different between IPv4 and IPv6.
 2013-03-10 11:39:11 -07:00
Nicolas Tsiftes a8dc74bda8 Merge pull request #133 from darconeous/pull-requests/cpu-avr-gc-sections 
cpu/avr: Make sure that GCC removes all unused symbols.
 2013-03-07 12:52:24 -08:00
Mariano Alvira ab8fe95864 Revert "Merge pull request #120 from Jeff-Ciesielski/stm32_cl" 
This reverts commit 029bc0ee27, reversing
changes made to a7b3e99644.

This uses LGPL libopencm3. While the patch doesn't include the code,
the resulting binary would force the release of all code as LGPL.
 2013-03-02 08:11:28 -05:00
Robert Quattlebaum 67a39618eb cpu/avr: Make sure that GCC removes all unused symbols. 
This magic comes from the `--gc-sections` linker flag, which turns on garbage collection for unused input sections. The compiler flags `-ffunction-sections` and `-fdata-sections` make sure that each function and each static data definition have their own section. The result is that GCC can prune away all unused symbols, reducing the size of the resulting executable.

These optimizations may be disabled by setting the Makefile variable
`SMALL` to zero.
 2013-02-28 21:59:19 -08:00
Robert Quattlebaum 38b2863831 Update cpu/native/Makefile.native 2013-02-26 11:29:04 -08:00
Nicolas Tsiftes 42e4b2b02a Merge pull request #143 from idelamer/master 
Bug fix for Issue #88
 2013-02-24 15:26:38 -08:00
Mariano Alvira 029bc0ee27 Merge pull request #120 from Jeff-Ciesielski/stm32_cl 
Add initial support for STM32F1x Connectivity Line devices
 2013-02-24 15:08:57 -08:00
Oliver Schmidt c6620e47aa Merge pull request #131 from oliverschmidt/master 
Two minor retro-specific changes.
 2013-02-16 15:12:52 -08:00
Oliver Schmidt 61b90c0126 We actually need PROJECT_OBJECTFILES and PROJECT_LIBRARIES for retro builds too. 2013-02-16 22:57:50 +01:00
Nicolas Tsiftes 2eb3c2a492 Merge pull request #94 from alignan/master 
Fixes Issue #93
 2013-02-16 13:46:09 -08:00
Ivan Delamer c22838b9d3 Enable Timer1 on Raven so that interrupts coming from radio, which are 
connected to input capture, fire again.
 2013-02-15 16:08:37 -07:00
Oliver Schmidt 98060c1eab Moved from last cc65 release (2.13.3) to recent cc65 snapshot (2.13.9). 
Relevant cc65 changes...

General:
- The compiler generates "extended" dependency info (like gcc) so there's no need for postprocessing whatsoever :-)
- The linker is very pernickety regarding the ordering of cmdline options so a custom linker rule is necessary :-(

Apple2:
- The various memory usage scenarios aren't specified anymore via separate linker configs but via defines overriding default values in the builtin linker config.

Atari:
- The builtin linker config allows to override the start addr so there no more need for a custom linker config.
- The C library comes with POSIX directory access. So there's no more need for for a custom coding.

CBM:
- The C library comes with POSIX directory access. So there's no more need for for a custom coding.
 2013-02-14 15:42:43 +01:00
Jeff Ciesielski 6b97fa8382 stm32f1x_cl: Fix stm32f107 linker script 
This is a critical fix which adds inclusion of the entire data/bss
section to the output ELF file.  Without it, the BSS section will not
be zeroed out
 2013-02-09 23:54:14 -08:00
Oliver Schmidt c7f986faf5 Merge pull request #121 from oliverschmidt/master 
Several minor adjustments.
 2013-02-08 17:04:04 -08:00
Oliver Schmidt 9938cb6838 Adjusted names. 2013-02-09 01:58:37 +01:00
Jeff Ciesielski 5c6018f0e2 stm32f1x_cl: Add initial support for STM32F1x connectivity line 
This currently supports the stm32f107, but support will be added for
the F105 shortly (missing a linker script and I can't properly test
without a devkit).
 2013-02-06 15:41:50 -08:00
Mariano Alvira fb8bbf37cf Use the RTC only as the main timer. 
This is a major change to how the main tick interrupt is handled on
the mc1322x platforms. Instead of using two timer resources, TMR0 and
RTC, this patch unifies all the timers to use the RTC. This is enabled by
implementing etimers as scheduled rtimers. The main advantage (aside
from freeing TMR0 for general use) is have the Contiki timebase come
from the same source that will be used for sleeping and wakeup.
 2013-02-03 15:15:05 -05:00
Mariano Alvira ad55ccdec4 add working routines to turn the mc1322x radio on and off 2013-02-03 14:48:38 -05:00
Oliver Schmidt 69317ad1db Renamed retro 'dhcp-client' to 'ipconfig' as it can as well be used for interactive manual configuration. 2013-02-01 21:20:21 +01:00
Oliver Schmidt 74dfff972f Do not reject frames with a length exactly equal to the uIP bufer size. 2013-01-30 23:39:01 +01:00
Robert Quattlebaum a571b663b0 platform/minimal-net: Better, more seamless support for OS X. 
This patch enables automatic route setup and cleanup when
starting and stopping the minimal-net target on OS X.

Both IPv4 and IPv6 are supported.

Using the minimal-net target on OS X was absolute hell
before I came up with this patch. Now it is painless.
 2013-01-30 09:17:30 -08:00
Robert Quattlebaum 092b6f3baa platform/minimal-net: Implement better idle behavior. 
The minimal-net target, as currently written, wakes up the
CPU every millisecond to check for packets, and will only
react in real-time to input from stdin. If you are running
this on a laptop battery, your battery will quickly drain.

This change allows the CPU to idle when there is literally
nothing to do while still being responsive to input from
stein and/or incoming packets. This fix should significantly
improve performance while significantly improving power
usage. Win-win.

Also added `_xassert()` implementation so that the contiki-
provided `assert()` macro will work properly when used
on this platform.
 2013-01-30 09:17:29 -08:00
Oliver Schmidt e88997b71c Minor README updates. 2013-01-29 22:44:37 +01:00
Antonio Lignan 2cf4e30b11 Baudrate now is configured taking into account the MCU frequency, instead of using fixed values for 8MHz freq 2013-01-29 12:23:23 +01:00
Oliver Schmidt 1a5e20bc5f Remove tab chars from retro C sources. 2013-01-28 23:43:08 +01:00
George Oikonomou eea6b9051d Removed a stray leds_toggle 2013-01-09 22:46:20 +00:00
Adam Dunkels 326781ef43 Merge pull request #74 from malvira/maca-dummy-rx 
Receive packets in a dummy_rx when the maca packet pool is
 2013-01-06 14:10:23 -08:00
Mariano Alvira a53e653bbf Receive packets in a dummy_rx when the maca packet pool is 
empty. These packets get dropped.
 2013-01-06 15:12:07 -05:00
Mariano Alvira 64ded5aecc run the linker script through CPP so that the stack sizes can be 
changed using CONF parameters via DEFINES (e.g. SYS_CONF_STACK_SIZE
4096)
 2013-01-05 17:08:59 -05:00
Giovanni `evilaliv3` Pellerano ee556dcf14 minor corrections to adhere contiki code style guidelines 2012-12-21 12:36:29 +01:00
Giovanni `evilaliv3` Pellerano f68df3a81c added support for pic32 (PIC32MX795F512L) 2012-12-17 09:14:23 +01:00
George Oikonomou 380ee3bae9 Code style fixes: cc253x 2012-12-16 19:28:56 +00:00
George Oikonomou 874bec26a5 Code style fixes: cc2430 2012-12-16 19:28:55 +00:00
Arngrimur Bjarnason b533a683c3 Changed makefile. Removed extra slash 2012-12-10 20:41:43 +01:00
Mariano Alvira f60a00b93e the contiki-maca process should wait for a poll event 2012-12-02 14:26:51 -05:00
Mariano Alvira b3bb3ff53d fix very incorrect insert_at_rx_head; the bugged version would make 
the rest of the rx list dangling.

this is used to insert the ack packet needed by the upper layers in
the netstack.
 2012-12-02 14:25:39 -05:00
Mariano Alvira f7d1d78ac9 disable pad keeper when using ADC pin; otherwise you'll see a 20k input 
impedance.
 2012-11-30 10:44:26 -05:00
Adam Dunkels db41a51ae6 Make gcc default LD, and allow override with LD_OVERRIDE 2012-11-21 19:46:31 +01:00
Ilya Dmitrichenko d0f18e5d04 Fixed LDFLAGS for cross-compiling of "native" 2012-11-21 18:09:29 +00:00
Ilya Dmitrichenko 092c69639c Enable native target for cross-compiling - 
by now it would have worked if you set CC via
command line (e.g. `make CC=clang`, though it
wouldn't work when CC is set in the platform
makefile which includes `Makefile.native`.
 2012-11-21 18:09:10 +00:00
Mariano Alvira 03ab3fe317 Newer and cleaner TARGET=econotag as well as robust mc13224v 
configuration system.

(also deprecate TARGET=redbee-econotag)

- mc13224v now automatically probes hardware config for buck converter
and 32kHz crystal as well as automatically monitors battery voltage
and manages the buck accordingly.

- new flashed based config system for mc13224v parameters such has
  radio modes (demod, autoack), nvmtype, mac address, channel and
  power.

- considerably cleaned up econotag platform code (suffered from severe
  case of bit-rot)
 2012-11-19 19:16:29 -05:00
Mariano Alvira 2c9a538582 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into bump-libmc1322x 
bump libmc1322x to 7bee48243c

Conflicts:
	cpu/mc1322x/board/Makefile.board
	cpu/mc1322x/lib/include/uart.h
	cpu/mc1322x/lib/uart1.c
	cpu/mc1322x/lib/uart2.c
	cpu/mc1322x/src/default_lowlevel.c
 2012-11-18 18:27:39 -05:00
Etienne Duble 7905316c54 Fix: stm32w flasher for Ubuntu 12.04 and later 2012-11-09 14:14:57 +01:00
Etienne Duble ecdbbaec9a Fix: handle stm32f-based serial interfaces (/dev/ttyACMx) 2012-11-09 14:00:16 +01:00
George Oikonomou 79cffa030f cc2531: USB CDC-ACM code style fixes 
Closes #18
 2012-11-01 17:42:04 +00:00
George Oikonomou 1a0f01ccc4 cc253x: Config to swap between UART and USB I/O 
See Pull Request #18
 2012-11-01 17:41:57 +00:00
Philippe Rétornaz eabaa0c8e4 cc253x: DMA Changes 
- Fixed DMA irq flag clearing
- Added a dma_reset helper

See Pull Request #18
 2012-11-01 17:41:49 +00:00
Philippe Rétornaz 898bd07810 cc253x: optionally push bits in p2 interrupt 
See Pull Request #18
 2012-11-01 17:41:46 +00:00
Philippe Rétornaz 0a6e65acdf cc2531: USB changes: 
- usb cdc-acm:
  * implement get line coding
  * use printf only when debugging
  * Add events

- usb-core: do not force debugging

See Pull Request #18
 2012-11-01 17:41:41 +00:00
George Oikonomou c1d72475d7 cc253x: Renamed P2 interrupt-related files for better consistency 
See Pull Request #18
 2012-11-01 17:41:38 +00:00
George Oikonomou c60f0b4349 cc253x: P2-related routines are now bankable 
We keep the ISR in its own file and move everything else
to a different one, so that we only have to keep the ISR
in HOME

See Pull Request #18
 2012-11-01 17:41:32 +00:00
George Oikonomou d9d4fa168d cc253x: Renamed the P2 ISR 
This is mainly a naming convention thing, we want to have 'isr'
as part of the name, instead of 'int'. We also want port_2 instead
of p2 because we already had port_1

See Pull Request #18
 2012-11-01 17:41:28 +00:00
George Oikonomou fea4970142 cc253x: Configurable linkage for the P2 ISR 
See Pull Request #18
 2012-11-01 17:41:24 +00:00
Philippe Rétornaz ba96408f37 cc253x: Add USB support to the compilation scripts 
See Pull Request #18
 2012-11-01 17:41:21 +00:00
Philippe Rétornaz d93fee612d cc2531: Add USB driver 
See Pull Request #18
 2012-11-01 17:41:17 +00:00
Philippe Rétornaz ddc8120d7c cc253x: Add p2 interrupt handler 
The P2 Interrupt is shared across many periferal (I2C, USB, GPIO).
This adds a generic interrupt handler on which the differents drivers
can register a handler.

See Pull Request #18
 2012-11-01 17:41:11 +00:00
Philippe Rétornaz dec34c21ef cc2531: change cdc-acm descriptor 
Change to have a real usb VID/PID and better fit the capabilities
of the CC2531 hardware (enpoint size, location).

Compile only if the cdc-acm class is requested.

See Pull Request #18
 2012-11-01 17:41:07 +00:00
Philippe Rétornaz 0e55eb0947 cc2531: Copy arm usb framework 
See Pull Request #18
 2012-11-01 17:40:35 +00:00
George Oikonomou 713c2e5974 DOS EOL and indentation fixes (core/ apps/ cpu/) 
- Removed some DOS EOLs
- Changed some tabs to spaces
- Removed some trailing whitespaces

Part of Pull Request #6
 2012-10-30 13:43:51 +00:00
Adam Dunkels 6c8fbd2dff Merge pull request #11 from adamdunkels/remove-rtl8019 
Removed old unused RTL8019 code that had license issues
 2012-10-29 08:43:59 -07:00
Adam Dunkels 1af22fa4fe Removed old unused RTL8019 code that had license issues 2012-10-29 16:08:09 +01:00
Mariano Alvira 4087c0785f remove -g 
see http://comments.gmane.org/gmane.os.contiki.devel/13869
 2012-10-29 10:34:28 -04:00
Adam Dunkels 944537fccf Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
Niclas Finne f5c8cff5b2 Made MT stack size configurable 2012-10-23 00:52:52 +02:00
George Oikonomou d84a97103f cc2x3x stack debugging macro fix 2012-09-20 15:12:02 +01:00
George Oikonomou fde1510653 Added definitions for cc2530 DMA-related SFR bits 2012-09-20 15:09:15 +01:00
George Oikonomou 3b0e92168b Copied cc2530 stack functions to the cc2430 port 2012-09-20 15:09:15 +01:00
George Oikonomou 95b9d4ee29 Sensinode/cc2430 stack depth optimisation 
This replicates the method used by the cc2530 port
 2012-09-20 15:09:15 +01:00
George Oikonomou cb168da729 Changed the cc2430 sleep_flag to uint8_t 2012-09-20 15:09:15 +01:00
George Oikonomou fa5a38666b Removed redundant #else blocks 2012-09-20 15:09:15 +01:00
George Oikonomou 88c6689e38 cc2430: Build with --fomit-frame-pointer 2012-09-20 15:09:15 +01:00
Niclas Finne 767e8bb551 Default value for _DATA20_HEAP_SIZE when using the IAR compiler on MSP430 platforms 2012-09-20 14:01:56 +02:00
Niclas Finne 4630945475 Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms 2012-09-19 22:49:19 +02:00
George Oikonomou ee7af77ca9 Reworked the cc2530 stack debugging facilities: 
- Moved to their own file
  (so we can later copy the entire thing over to cc2430)
- Renamed the functions
  (for naming convention reasons)
- The entire thing can be enabled/disabled
- Added a couple more macros
- Hooked into main()
 2012-09-07 17:40:17 +01:00
Philippe Rétornaz 9a63e8c027 cc253x: Add stack monitoring helpers 2012-09-07 17:32:54 +01:00
Philippe Rétornaz 48d99f15c8 cc253x: fix dma interrupt enable flag 2012-09-07 17:32:54 +01:00
George Oikonomou c6ec22c4c8 cc2530: Added a method to maximise stack depth 
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
 2012-09-07 17:32:53 +01:00
Philippe Rétornaz 666ff6ca55 cc253x: use a uint8_t for sleep_flag 
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
 2012-09-07 17:32:10 +01:00
Philippe Rétornaz 44bcabe89c cc253x: Change CFLAGS 
This add -fomit-frame-pointer by default, it decrease sliglty the
stack usage when several function call are nested.
On some specific case 30 bytes could be saved on the stack.
 2012-09-07 17:32:10 +01:00
George Oikonomou 8699f7741d Fixed typos and a stray printf. Adjusted comments 2012-09-07 17:31:25 +01:00
Ivan Delamer b43dad00b0 Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES 
#defines.
 2012-09-04 11:12:18 -06:00
Ivan Delamer 2e72ec3594 Place ATmega1281 define in correct section (it does have compare C 
unit, avoid duplicate define and compiler warning).
 2012-09-01 15:22:13 -06:00
Ivan Delamer 5636357243 Fix RF230 transition: RX_AACK_ON -> TX_ARET_ON (go through PLL_ON, 
as per datasheet). Tested on RF230 and 128RFA1 (RF231).
 2012-09-01 15:20:00 -06:00
George Oikonomou 26a87ee9cb Improved handling of cc2x3x rf_flags 2012-07-11 10:53:14 +01:00
George Oikonomou 43f2790357 Added channel_get() to the cc2x3x RF drivers 2012-07-11 10:53:14 +01:00
George Oikonomou d66241fd97 Bugfixed the cc2530 LOW_POWER_RX configuration 
Report and fix by Tom Xiao
 2012-07-11 10:53:14 +01:00
George Oikonomou 62fbd389d8 Renamed a cc253x SFRX to stop namespace conflicts 
The TR0 SFRX can not use the name TR0 because it
conflicts with TCON.TR0 on the default 8051.

See SDCC bug 3513300
 2012-07-11 10:53:14 +01:00
George Oikonomou 4b73b48f60 Fixed the cc2530 RSSI adjustment 2012-07-11 10:53:14 +01:00
Ivan Delamer 17a62a649c ATmega128RFA1 bug fix: no interrupt pin used (embedded radio). 
Enabling interrupt caused MCU reset if using pin as GPIO.
 2012-07-10 14:36:47 -06:00
Niclas Finne 418a5772e6 Removed leds debug output 2012-06-07 10:35:22 +02:00
George Oikonomou 47db065034 Bugfixed the cc253x UART0 init (Thanks, Deng Jian) 
The flush instruction was resetting the stop bit level to 'low'
 2012-06-06 15:25:57 +01:00
David Kopf e9a55cc222 Enable check on received length to prevent buffer overflow. Thank you Cooja! 2012-05-28 13:02:23 -04:00
George Oikonomou 259b497122 Minor Sensinode build cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou 1f7171f943 Adjust cc2x3x ports to the new clock API 2012-05-16 15:22:31 +01:00
George Oikonomou 0d4b90c42b cc2530 watchdog improvements and cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou 274a5ebb9c Fixed a typo which was preventing the cc253x watchdog from starting 2012-05-16 15:22:30 +01:00
Laurent Deru 56914963ef Reactivate flash protection after maca init 2012-05-09 10:24:38 -04:00
Mariano Alvira a4813d815f use --gc-sections instead of -gc-sections 2012-05-06 12:19:20 -04:00
Mariano Alvira 4acad929f0 add gc-sections, roughly 4kB savings. 2012-05-06 09:24:06 -04:00
David Kopf d6dc216e02 Reorder includes to prefer platform routines. Remove redundant RPL define. 2012-04-27 16:54:09 -04:00
George Oikonomou dd26accc07 We can now use SDCC's __nonbanked feature 
This allows us to reduce CODE footprint of SDCC projects
built with --model-huge. Use carefully!

* Added a facility which allows us to enable/disable the
  feature from the CPU dir (CC_CONF_NON_BANKED_OPTIMIZATION)
* Added the CC_NON_BANKED keyword to some platform files
  (expands to __nonbanked)
* Started using this for some examples
 2012-04-26 15:28:43 +01:00
Adam Dunkels b85bc3379c Bugfix in clock_wait() declaration. Various style fixes. 2012-04-22 20:54:29 +02:00
George Oikonomou e95f94a9a8 Added support for reading MAC from the cc253x flash 
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
 2012-04-20 16:03:38 +01:00
George Oikonomou 29090a3dda The cc253x Makefile specifies SoC flavor 
This will help us slowly add better support for smaller SoCs
instead of just assuming that all cc253x SoCs are F256

- We build for F256 by default but the project Makefile can override this
- We currently ignore this when passing --code-size. This is a ToDo
- The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant
 2012-04-20 16:03:38 +01:00
George Oikonomou 6fb48174ba Fixed a documentation typo 2012-04-20 16:03:37 +01:00
Niclas Finne 1b13b69814 Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611 2012-04-10 16:05:10 +02:00
Niclas Finne 57a166c3db Corrected compiler flags for the IAR compiler 2012-04-10 15:27:44 +02:00
David Kopf cac4e9a222 Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t. 
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
 2012-04-09 15:49:53 -04:00
David Kopf 40bd020394 Fix wrong register addresses. 2012-04-09 09:58:12 -04:00
George Oikonomou 57969259ce cc2x3x clock_delay(len) now delays for approx. len usecs 2012-04-03 16:26:11 +01:00
George Oikonomou 3cb26adeda Added an ASM(foo) macro for cc243x 2012-04-03 16:26:11 +01:00
George Oikonomou 242e02658f The cc2530 UART driver was sending a 0 down the line on init 2012-04-03 16:26:10 +01:00
George Oikonomou b3de052e01 Ported the stack-friendly clock ISR code over from cc243x to cc253x 2012-04-03 16:26:10 +01:00
George Oikonomou 11a7f644ac Comment rewording and formatting 2012-04-03 16:26:10 +01:00
George Oikonomou ce17fa131c Stack-friendly cc243x clock ISR enabled by default 
This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate
as originally thought. In fact, it has pretty much the same
accuracy as the old, stack-hungry version.

* Renamed the define from CLOCK_CONF_ACCURATE (1: old) to
  CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying
  that one is more accurate than the other.
* Using CLOCK_CONF_STACK_FRIENDLY by default.
 2012-04-03 16:26:10 +01:00
George Oikonomou 924fe934c1 Deleted obsolete macros. Minor formatting 2012-04-03 16:26:10 +01:00
George Oikonomou ffa3a1c4c3 cc2x3x clock driver cleanup 
* Bit-Addressable SFRs are now accessed as such,
  instead of (N)OR-ing the byte
* A routine was declared as CCIF but not defined as such. Fixed
* Deleted a leftover duplicate define
* Formatting
* Comment updates and clarifications
 2012-04-03 16:26:10 +01:00
simonduq 930c7c25bc fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file, 
more printouts in main when ipv6 is used, and a target for memory
profiling taking stm's gnu.ld static stack size into account
 2012-04-03 11:47:30 +02:00
George Oikonomou 5240519dd9 Renamed a config define to better match contiki's naming philosophy 2012-04-02 11:38:54 +01:00
George Oikonomou bce34e4b9a For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir. 
The value is not really configurable by the platform so having it
in contiki-conf.h didn't make huge sense.
 2012-04-02 11:22:19 +01:00
George Oikonomou d958ee3125 Deleted the old Sensinode 'read mac from flash' routine. 
Since the introduction of a purpose-written routine, the old
generic one (which was written in asm) was never being used.
There was a configuration directive which allowed us to switch
between the two. All references to this configuration directive
have also been removed.
 2012-04-02 11:21:32 +01:00
George Oikonomou 5d8f63a61b We've not been using the cc2430 converter for a while now 2012-04-02 11:03:49 +01:00
George Oikonomou 7854ee499a Wrapped cc2x30 SOFT_RESET() macro inside do {...} while(0) 2012-03-29 13:11:04 +01:00
George Oikonomou 5afdd19403 Adjusted check to determine if we are being built with SDCC 
Since rev #7342, SDCC defines __SDCC_mcs51 instead of SDCC_mcs51.
We check for either
 2012-03-29 13:10:25 +01:00
George Oikonomou 4f1e251603 Some uN_t had crept back in cc2530dk and sensinode. 
Changed to uintN_t plus a bit of code formatting
 2012-03-29 13:10:10 +01:00
simonduq 946f00bf7b stm32w: added ability to upload and reset all connected boards, and login using MOTE=x 2012-03-26 23:00:44 +02:00
simonduq 95ae5c5d51 avoid unnecessary symbols.c/h copying 2012-03-26 23:00:43 +02:00
George Oikonomou ad256e5014 New platform: TI cc2530 Development Kit 
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
 2012-03-23 14:41:07 +00:00
George Oikonomou b7674c3636 Reincarnate the sensinode/cc2430 port 2012-03-23 14:41:07 +00:00
simonduq e4fb360262 stm32w platforms: contikimac support in the Rime case, with EUI-64 2012-03-20 17:30:59 +01:00
simonduq 5da4463236 adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La) 2012-03-20 17:29:58 +01:00
Niclas Finne ff7a977dc7 Improved support for the IAR compiler for the MSP430 platforms 2012-03-07 23:09:05 +01:00
Niclas Finne 684c3edfa6 Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood. 2012-03-07 23:04:52 +01:00
Niclas Finne 2eee14a1d8 Allow compiler flag SMALL to be set to disable SMALL-build. Patch by Andre Frimberger. 2012-03-06 15:35:20 +01:00
Ilya Dmitrichenko 49cd7878e3 Avoid deprecated error on Darwin. 2012-03-02 15:15:47 -05:00
Ilya Dmitrichenko 499d3052ee Fixed TARGET=native compilation issues on Darwin. 2012-03-02 15:15:42 -05:00
David Kopf 2b7ecefce7 Remove unused SPI initializer flag from AVR. Comment out in the msp-430 template. 2012-02-27 17:05:22 -05:00
Ilya Dmitrichenko 9c99d46e24 Simplified host OS platform detection in Makefiles 2012-02-25 10:09:33 -05:00
David Kopf deb75d3d97 Several bugfixes 2012-02-21 11:14:52 -05:00
David Kopf 59e459e0e9 Add missing mtarch_stop function 2012-02-21 11:11:53 -05:00
David Kopf 6e45dfe5ff PROGMEM changes needed for newer avr-gcc compiler 2012-02-21 11:10:57 -05:00
Nicholas J Humfrey 1cda3da17e Converted u8_t to uint8_t and u16_t to uint16_t in the cpu directory. 2012-02-21 08:33:24 -05:00
Mariano Alvira 68591919e6 mc1322x: add -MMD to Makefile.mc1322x to correctly create dependencies 2012-02-16 11:17:15 -05:00
Mariano Alvira 43062b6d74 mc1322x: change how board.h works to allow default board.h (defaults 
to econotag)
 2012-02-13 10:01:36 -05:00
Mariano Alvira ee8f2c669e mc1322x: remove symbols.{c,h} 2012-02-13 10:01:36 -05:00
David Kopf 9d6542d49b Fix minimal-net webserver6, broken after native border router changes. 2012-02-11 15:03:24 -05:00
David Kopf 38267bfd5a Webserver-nano: Add page load times, remove workaround code for bug in arm strformat.c, correct the double count of leading zeros there. 2012-02-11 14:58:35 -05:00
David Kopf 987906be97 rf230bb updates: involves setting the 801.15.4 pending bit, 
0x800000 cpu clock, and a jtag reset bugfix
 2012-02-01 14:16:39 -07:00
Ivan Delamer 57e686179c Improved rf230bb.c synchronization/locking. Removed unnecessary locks 
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
 2012-02-01 13:37:45 -07:00
David Kopf 7ca141b457 Access uart registers directly instead of through intermediate addresses in a RAM struct. 
Add a platform define to reduce the number of ports supported by the cpu.
 2012-01-21 13:49:58 -05:00
Niclas Finne f26920ae9b Define the BV macro if not already defined 2012-01-11 08:46:16 +01:00
David Kopf 58298f59db Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal 
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
 2012-01-10 12:42:27 -05:00
Niclas Finne f3db12c19d MSP430 setup for f2xxx based on Z1 2012-01-09 14:56:03 +01:00
Niclas Finne 9ffcd53868 Fixed compiler warning (with IAR compiler) 2012-01-09 14:56:00 +01:00
Niclas Finne 3daa822f89 Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc) 2012-01-09 14:55:57 +01:00
Niclas Finne fd81a0d393 Minor cleanup (avoid setting some compiler flags twice) 2012-01-09 14:55:54 +01:00
Niclas Finne 8e1e12dfd3 Ignore SMALL when using IAR compiler 2012-01-09 14:55:48 +01:00
Nicolas Tsiftes eba64bdc5e Be more explicit with the relationship between inheritance between MSP430 families. 2012-01-09 14:55:45 +01:00
Niclas Finne cdfa8708e3 * Added f2xxx for two series (for example z1) 
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
 2012-01-09 14:54:57 +01:00
Niclas Finne f4f84ffca4 Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X 2012-01-09 14:54:01 +01:00
Niclas Finne 09082f02fe Changed clock_delay to use the nop instruction 2012-01-09 14:49:39 +01:00
Niclas Finne cd4be4927a Fixed quick dco sync to also work with mspgcc 2012-01-09 14:41:42 +01:00
Niclas Finne 708f9d77d2 Corrected timing for higher CPU speed 2012-01-09 14:41:36 +01:00
Niclas Finne 05b10eb9ce Initial WiSMote port based on code from Arago Systems. 2012-01-09 12:25:06 +01:00
Niclas Finne 367c82a5ab added compiler flags and macros for IAR and mspgcc 4.4.5 compilers 2012-01-09 12:24:33 +01:00
David Kopf b251619a2f Add wpcap for cygwin/Windows native border router 2012-01-08 13:37:56 -05:00
Fredrik Osterlind 2644057fb2 using dma by default 2011-12-21 10:53:18 +01:00
David Kopf 81af871db9 Bugfix: use 16 bit tick count to adjust clock after sleep 2011-12-01 09:58:55 -05:00
Oliver Schmidt e38f008b9b The dependency on the ucontext functions has the potential to keep others from successfully using cpu/native for other platforms. As the Contiki multithreading library typically isn't used at all it's not worth the trouble. So we just limit it to Windows and Linux - where it is known to not only build but actually work. If someone needs the Contiki cpu/native multithreading library on another platform he's certainly welcome to add that platform - hopefully by just activating the codepath that we now made exclusive for Linux for his platform. 2011-11-30 23:41:39 +01:00
David Kopf fb977cb9ef Better fix for hardware FCS error on JTAG reset 
Correct silly error introduced by trying to save two bytes.
 2011-11-15 13:24:58 -05:00
David Kopf 31ba84eb75 Improve rf23x cca procesing 
Fix delay_loop timing bug by using long long calculation.
128rfa1 and rf230 both working with contikimac RDC
 2011-11-14 11:49:58 -05:00
David Kopf d1cd3f213c Add general unsupported interrupt vector suggested by Daniel Willmann 2011-11-14 11:36:18 -05:00
David Kopf 6eba721af1 Add rtimer_arch_sleep function, enabled with RDC_CONF_MCU_SLEEP 2011-11-14 11:10:35 -05:00
David Kopf c2364897f8 atmega128rfa1 cca fixes, energest and rimestat macros. 
Add option to return ACK to RDC layer when in extended mode, based on Georg von Zengen code.
 2011-11-08 12:20:22 -05:00
Niclas Finne bf299b1a07 Fixed splhigh/splx for the IAR compiler 2011-09-27 22:51:28 +02:00
Joakim Eriksson 5b1d9617c4 moved io and signal and IAR-GCC checks from driver files into contiki include file 2011-09-26 10:38:41 +02:00
Joakim Eriksson 95dde73618 fixed Sky platform for IAR compiler 2011-09-11 17:18:02 +02:00
David Kopf f721f646fa Adjust sleep time by ticks instead of seconds, proposed by Ivan Delamer 2011-09-10 12:44:49 -04:00
Adam Dunkels 4fd8133aa3 Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE) 2011-09-05 20:42:19 +02:00
Mariano Alvira 43910c1be7 don't worry about wraparound in rtimer_arch_schedule 2011-09-02 12:36:10 -04:00
Mariano Alvira 6c0bbc492b change mc1322x rtimers to 32-bit 
hardcode a close default value for the RTC
 2011-09-02 12:32:47 -04:00
David Kopf dfdae5b02b This fixes commit 9a1ce7 for spaces instead of .... 2011-08-31 12:08:01 -04:00
David Kopf 470887eddd Print elf size if ELF_SIZE is defined 2011-08-31 11:50:14 -04:00
David Kopf 9a1ce7cf75 Use enumerated tx return values 2011-08-31 11:40:23 -04:00
David Kopf 5f2b2074f0 Implement WITH_RPL option in makefile 2011-08-28 16:11:48 -04:00
David Kopf bdec65b889 Fix typos and file endings 2011-08-28 16:04:36 -04:00
David Kopf 94fc40f736 Move LEDONPORTE1 define to contiki-conf.h, fixing typo. 2011-08-24 11:35:58 -04:00
David Kopf 09db159876 128rfa1 cca fix, NETSTACK_RADIO.off now returns 0/1 if radio off/on 2011-08-18 14:36:04 -04:00
David Kopf 53737d9a38 Use correct prescale factor 2011-08-18 13:58:20 -04:00
David Kopf 3ea102050b Apply patch of Ivan Delamer for atmega1281 @ 4 MHz 2011-08-17 13:16:46 -04:00
David Kopf 36fa735323 Calculate best prescaler based on F_CPU and CLOCK_CONF_SECONDS. Inspired by patch from Ivan Delamer. 2011-08-17 13:15:26 -04:00
maniacbug 0990896f54 Added an .eu target to upload only the eeprom for AVR cpu. 2011-08-16 14:10:48 -04:00
maniacbug 8f0bb86c02 No strict aliasing for AVR 
AVR build generates numerous aliasing errors.  This -f switch silences them.
 2011-08-16 14:07:06 -04:00
David Kopf 577215deca Use 128rfa1 interrupts instead of timing. 
Generalize DEBUGFLOW macro for use in multiple routines.
 2011-08-15 15:06:38 -04:00
David Kopf 50d1086553 Add changes needed for contikimac 2011-08-13 11:38:38 -04:00
David Kopf 03ab525652 Option for nested rtimer interrupts 2011-08-13 11:35:03 -04:00
David Kopf cdcb2c4744 CCA measurement was always returning busy 2011-08-06 13:48:52 -04:00
David Kopf b70d2b3163 Remove duplicate code block 2011-08-05 17:34:38 -04:00
David Kopf c9b19ce655 Change timer setups for arbitrary CLOCK_CONF_SECOND 
Change raven to 128 ticks and enable 32KHz crystal as default.
 2011-08-05 15:14:35 -04:00
David Kopf e2ad2acde4 Add stk500 platform and changes suggested by Daniel Willmann 2011-08-03 11:18:55 -04:00
David Kopf 6ec85fe079 Add Iris port of Shinta Hatatani 2011-08-03 10:17:59 -04:00
Mariano Alvira 2b9f4e8fed Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x 2011-08-01 19:50:46 -04:00
David Kopf cf3241c5db Add file needed for rpl border router 2011-07-24 12:07:39 -04:00
David Kopf 0bb585fd60 Replace WEBSERVER by AVR_WEBSERVER 2011-07-24 11:43:17 -04:00
Simon Berg 506eced1bc Bug fix by Jonathan Chung 2011-07-22 15:07:52 +02:00
Mariano Alvira 485d6716e0 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x 
Conflicts:
	cpu/mc1322x/src/default_lowlevel.c
 2011-07-18 07:25:19 -04:00
HATATANI Shinta f4740a062a IRIS port is working with uIPv6 2011-07-15 16:36:25 +09:00
Mariano Alvira 758fc37307 mc1322x: flush the rx fifos when full 2011-07-12 07:05:04 -04:00
Mariano Alvira 4cf9514aa9 fix gpio initialization for uart2 2011-07-09 14:33:03 -04:00
Mariano Alvira 6d96721ac4 mc1322x: block in uart putc if the TX buffer is full. Can also be 
configured to drop chars instead with UARTx_DROP_CHARS
 2011-07-09 12:46:30 -04:00
Mariano Alvira e80f9eb4b5 mc1322x: build fixes for uart2 2011-07-08 19:40:42 -04:00
Mariano Alvira e2d74fa0a5 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into uart-upstream 
Conflicts:
	cpu/mc1322x/lib/include/uart.h
	cpu/mc1322x/src/default_lowlevel.c
 2011-07-08 19:21:15 -04:00
David Kopf 6ea7250af7 Change ctimer startup order, add multihop to wpcap and minimal-net platform. 2011-06-30 12:12:07 -04:00
David Kopf c48b7ab78d Add RPL nodes and border router to minimal-net platform (cygwin only) 2011-06-28 08:19:48 -04:00
David Kopf 6b434a553f Implement SRAM routine of Georg von Zengen 2011-06-21 13:03:58 -04:00
Joakim Eriksson af601dfb23 improved support for IAR compiler for z1 2011-06-05 00:21:47 +02:00
Mariano Alvira 33b32c61e9 Only insert an ack packet if the ack request bit is set 2011-06-01 13:47:05 -04:00
Joakim Eriksson 77ec0bfa0f fixed the z1 platform and generic code used by z1 to work with IAR compiler 2011-05-25 17:21:51 +02:00
Mariano Alvira 724bcbd2d3 Merge remote branch 'libmc1322x/master' 
Conflicts:
	cpu/mc1322x/src/default_lowlevel.c
 2011-05-14 21:19:47 -04:00
Joakim Eriksson fd75050c67 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-05-13 11:53:45 +02:00
Joakim Eriksson 2c16538e6a fixed support for IAR compiler 2011-05-13 11:52:42 +02:00
Salvatore Pitrulli 7a48110067 STM32W flasher utilities for Linux and Windows merged into a single folder. 2011-05-10 19:26:33 +02:00
Mariano Alvira 0a2b86456b add option to insert an ack packet on autoack 2011-05-08 09:50:57 -04:00
Mariano Alvira 65671c66c6 turn on insert ack packet by default 2011-05-08 09:50:57 -04:00
Joakim Eriksson 3fa8da5ddf fixed IAR compilation paths 2011-05-02 15:19:28 +02:00
Salvatore Pitrulli 5eabf33211 Added functions for deep sleep to mbxxx platform. 2011-04-27 18:12:23 +02:00
Mariano Alvira d80449244d Merge remote branch 'libmc1322x/master' 2011-04-20 21:23:47 -04:00
Salvatore Pitrulli 01a7a78a94 Fixed temperature ADC conversion bug on mbxxx. 
The conversion was made from an incorrect source when
the GPIO pin was not PB7.
Added functions and macros used to select the correct
ADC channel.
 2011-04-20 18:06:20 +02:00
Salvatore Pitrulli aa968309af Merge remote branch 'sf/master' 2011-04-16 16:27:10 +02:00
Niclas Finne 813489633c Added missing include 2011-04-15 15:49:43 +02:00
Salvatore Pitrulli 4ff82b76e5 Removed -fsigned-char GCC compiler options. 2011-04-14 08:12:11 +02:00
Salvatore Pitrulli 0105057c44 Removed unwanted file. 2011-04-14 08:10:58 +02:00
Salvatore Pitrulli 0a0ad39c9b Added weak symbols for STM32W exception handlers and other minor updates for the HAL. 2011-04-14 08:06:13 +02:00
Salvatore Pitrulli 57163c616d Removed some warnings. 2011-04-14 08:05:21 +02:00
Salvatore Pitrulli af8e58e063 Set LED pins to output when MB851 is in sleep mode. 
This reduces power consumption.
 2011-04-13 18:14:12 +02:00
dak664 2e14df3981 Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6. 2011-04-08 15:15:16 -04:00
Salvatore Pitrulli 6655c876f2 Added functions and example for deep sleep on mb851. 
The added function let a process to make the system go
into deep sleep for maximum power saving.
The udp-ipv6-example shows how to use these new functions.
 2011-04-08 11:53:48 +00:00
dak664 89741bd322 Exit on watchdog reboot call 2011-04-07 17:47:54 -04:00
dak664 581d081ffe Don't use RF230_CONF_CCA_THRES if it is not defined. 2011-04-07 17:44:10 -04:00
Joakim Eriksson f603c965c1 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2011-04-06 20:15:44 +02:00
Joakim Eriksson 928bf6b6c1 fixed cpu/msp430 for compilation with IAR compiler 2011-04-06 20:08:48 +02:00
Mariano Alvira 4f4e06c71b Merge remote branch 'libmc1322x/master' 2011-04-06 05:56:06 -04:00
Oliver Schmidt 5da4faf71e Allow VC++ to be used as alternative to GCC for building in the WIN32 target. 
TODOs:
- Update README
- Add dependency handling
- Add rtimersupport
 2011-04-03 22:32:11 +02:00
Oliver Schmidt f83fb3704b Replaced make-empty-symbols with empty-symbols.[c|h] 
The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.
 2011-04-03 13:24:58 +02:00
dak664 a9cbbb4570 Add sneezer mode and tx power change 2011-03-23 18:08:07 -04:00
Mariano Alvira 11f5bca7c4 Merge remote branch 'libmc1322x/master' 
Conflicts:
	cpu/mc1322x/board/redbee-econotag.h
 2011-03-22 16:28:08 -04:00
Salvatore Pitrulli eb588f1aec New HAL and SimpleMAC for STM32W108. 2011-03-22 19:35:49 +01:00
dak664 5dd7500d0b Add configurable auto cca threshold and implement driver cca call. 
Show smallest rssi in jackdaw menu.
 2011-03-21 11:10:30 -04:00