Mariano Alvira
43062b6d74
mc1322x: change how board.h works to allow default board.h (defaults
...
to econotag)
2012-02-13 10:01:36 -05:00
Mariano Alvira
ee8f2c669e
mc1322x: remove symbols.{c,h}
2012-02-13 10:01:36 -05:00
David Kopf
9d6542d49b
Fix minimal-net webserver6, broken after native border router changes.
2012-02-11 15:03:24 -05:00
David Kopf
38267bfd5a
Webserver-nano: Add page load times, remove workaround code for bug in arm strformat.c, correct the double count of leading zeros there.
2012-02-11 14:58:35 -05:00
David Kopf
987906be97
rf230bb updates: involves setting the 801.15.4 pending bit,
...
0x800000 cpu clock, and a jtag reset bugfix
2012-02-01 14:16:39 -07:00
Ivan Delamer
57e686179c
Improved rf230bb.c synchronization/locking. Removed unnecessary locks
...
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
2012-02-01 13:37:45 -07:00
David Kopf
7ca141b457
Access uart registers directly instead of through intermediate addresses in a RAM struct.
...
Add a platform define to reduce the number of ports supported by the cpu.
2012-01-21 13:49:58 -05:00
Niclas Finne
f26920ae9b
Define the BV macro if not already defined
2012-01-11 08:46:16 +01:00
David Kopf
58298f59db
Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal
...
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
2012-01-10 12:42:27 -05:00
Niclas Finne
f3db12c19d
MSP430 setup for f2xxx based on Z1
2012-01-09 14:56:03 +01:00
Niclas Finne
9ffcd53868
Fixed compiler warning (with IAR compiler)
2012-01-09 14:56:00 +01:00
Niclas Finne
3daa822f89
Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc)
2012-01-09 14:55:57 +01:00
Niclas Finne
fd81a0d393
Minor cleanup (avoid setting some compiler flags twice)
2012-01-09 14:55:54 +01:00
Niclas Finne
8e1e12dfd3
Ignore SMALL when using IAR compiler
2012-01-09 14:55:48 +01:00
Nicolas Tsiftes
eba64bdc5e
Be more explicit with the relationship between inheritance between MSP430 families.
2012-01-09 14:55:45 +01:00
Niclas Finne
cdfa8708e3
* Added f2xxx for two series (for example z1)
...
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
2012-01-09 14:54:57 +01:00
Niclas Finne
f4f84ffca4
Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X
2012-01-09 14:54:01 +01:00
Niclas Finne
09082f02fe
Changed clock_delay to use the nop instruction
2012-01-09 14:49:39 +01:00
Niclas Finne
cd4be4927a
Fixed quick dco sync to also work with mspgcc
2012-01-09 14:41:42 +01:00
Niclas Finne
708f9d77d2
Corrected timing for higher CPU speed
2012-01-09 14:41:36 +01:00
Niclas Finne
05b10eb9ce
Initial WiSMote port based on code from Arago Systems.
2012-01-09 12:25:06 +01:00
Niclas Finne
367c82a5ab
added compiler flags and macros for IAR and mspgcc 4.4.5 compilers
2012-01-09 12:24:33 +01:00
David Kopf
b251619a2f
Add wpcap for cygwin/Windows native border router
2012-01-08 13:37:56 -05:00
Fredrik Osterlind
2644057fb2
using dma by default
2011-12-21 10:53:18 +01:00
David Kopf
81af871db9
Bugfix: use 16 bit tick count to adjust clock after sleep
2011-12-01 09:58:55 -05:00
Oliver Schmidt
e38f008b9b
The dependency on the ucontext functions has the potential to keep others from successfully using cpu/native for other platforms. As the Contiki multithreading library typically isn't used at all it's not worth the trouble. So we just limit it to Windows and Linux - where it is known to not only build but actually work. If someone needs the Contiki cpu/native multithreading library on another platform he's certainly welcome to add that platform - hopefully by just activating the codepath that we now made exclusive for Linux for his platform.
2011-11-30 23:41:39 +01:00
David Kopf
fb977cb9ef
Better fix for hardware FCS error on JTAG reset
...
Correct silly error introduced by trying to save two bytes.
2011-11-15 13:24:58 -05:00
David Kopf
31ba84eb75
Improve rf23x cca procesing
...
Fix delay_loop timing bug by using long long calculation.
128rfa1 and rf230 both working with contikimac RDC
2011-11-14 11:49:58 -05:00
David Kopf
d1cd3f213c
Add general unsupported interrupt vector suggested by Daniel Willmann
2011-11-14 11:36:18 -05:00
David Kopf
6eba721af1
Add rtimer_arch_sleep function, enabled with RDC_CONF_MCU_SLEEP
2011-11-14 11:10:35 -05:00
David Kopf
c2364897f8
atmega128rfa1 cca fixes, energest and rimestat macros.
...
Add option to return ACK to RDC layer when in extended mode, based on Georg von Zengen code.
2011-11-08 12:20:22 -05:00
Niclas Finne
bf299b1a07
Fixed splhigh/splx for the IAR compiler
2011-09-27 22:51:28 +02:00
Joakim Eriksson
5b1d9617c4
moved io and signal and IAR-GCC checks from driver files into contiki include file
2011-09-26 10:38:41 +02:00
Joakim Eriksson
95dde73618
fixed Sky platform for IAR compiler
2011-09-11 17:18:02 +02:00
David Kopf
f721f646fa
Adjust sleep time by ticks instead of seconds, proposed by Ivan Delamer
2011-09-10 12:44:49 -04:00
Adam Dunkels
4fd8133aa3
Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)
2011-09-05 20:42:19 +02:00
Mariano Alvira
43910c1be7
don't worry about wraparound in rtimer_arch_schedule
2011-09-02 12:36:10 -04:00
Mariano Alvira
6c0bbc492b
change mc1322x rtimers to 32-bit
...
hardcode a close default value for the RTC
2011-09-02 12:32:47 -04:00
David Kopf
dfdae5b02b
This fixes commit 9a1ce7 for spaces instead of ....
2011-08-31 12:08:01 -04:00
David Kopf
470887eddd
Print elf size if ELF_SIZE is defined
2011-08-31 11:50:14 -04:00
David Kopf
9a1ce7cf75
Use enumerated tx return values
2011-08-31 11:40:23 -04:00
David Kopf
5f2b2074f0
Implement WITH_RPL option in makefile
2011-08-28 16:11:48 -04:00
David Kopf
bdec65b889
Fix typos and file endings
2011-08-28 16:04:36 -04:00
David Kopf
94fc40f736
Move LEDONPORTE1 define to contiki-conf.h, fixing typo.
2011-08-24 11:35:58 -04:00
David Kopf
09db159876
128rfa1 cca fix, NETSTACK_RADIO.off now returns 0/1 if radio off/on
2011-08-18 14:36:04 -04:00
David Kopf
53737d9a38
Use correct prescale factor
2011-08-18 13:58:20 -04:00
David Kopf
3ea102050b
Apply patch of Ivan Delamer for atmega1281 @ 4 MHz
2011-08-17 13:16:46 -04:00
David Kopf
36fa735323
Calculate best prescaler based on F_CPU and CLOCK_CONF_SECONDS. Inspired by patch from Ivan Delamer.
2011-08-17 13:15:26 -04:00
maniacbug
0990896f54
Added an .eu target to upload only the eeprom for AVR cpu.
2011-08-16 14:10:48 -04:00
maniacbug
8f0bb86c02
No strict aliasing for AVR
...
AVR build generates numerous aliasing errors. This -f switch silences them.
2011-08-16 14:07:06 -04:00
David Kopf
577215deca
Use 128rfa1 interrupts instead of timing.
...
Generalize DEBUGFLOW macro for use in multiple routines.
2011-08-15 15:06:38 -04:00
David Kopf
50d1086553
Add changes needed for contikimac
2011-08-13 11:38:38 -04:00
David Kopf
03ab525652
Option for nested rtimer interrupts
2011-08-13 11:35:03 -04:00
David Kopf
cdcb2c4744
CCA measurement was always returning busy
2011-08-06 13:48:52 -04:00
David Kopf
b70d2b3163
Remove duplicate code block
2011-08-05 17:34:38 -04:00
David Kopf
c9b19ce655
Change timer setups for arbitrary CLOCK_CONF_SECOND
...
Change raven to 128 ticks and enable 32KHz crystal as default.
2011-08-05 15:14:35 -04:00
David Kopf
e2ad2acde4
Add stk500 platform and changes suggested by Daniel Willmann
2011-08-03 11:18:55 -04:00
David Kopf
6ec85fe079
Add Iris port of Shinta Hatatani
2011-08-03 10:17:59 -04:00
Mariano Alvira
2b9f4e8fed
Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x
2011-08-01 19:50:46 -04:00
David Kopf
cf3241c5db
Add file needed for rpl border router
2011-07-24 12:07:39 -04:00
David Kopf
0bb585fd60
Replace WEBSERVER by AVR_WEBSERVER
2011-07-24 11:43:17 -04:00
Simon Berg
506eced1bc
Bug fix by Jonathan Chung
2011-07-22 15:07:52 +02:00
Mariano Alvira
485d6716e0
Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x
...
Conflicts:
cpu/mc1322x/src/default_lowlevel.c
2011-07-18 07:25:19 -04:00
HATATANI Shinta
f4740a062a
IRIS port is working with uIPv6
2011-07-15 16:36:25 +09:00
Mariano Alvira
758fc37307
mc1322x: flush the rx fifos when full
2011-07-12 07:05:04 -04:00
Mariano Alvira
4cf9514aa9
fix gpio initialization for uart2
2011-07-09 14:33:03 -04:00
Mariano Alvira
6d96721ac4
mc1322x: block in uart putc if the TX buffer is full. Can also be
...
configured to drop chars instead with UARTx_DROP_CHARS
2011-07-09 12:46:30 -04:00
Mariano Alvira
e80f9eb4b5
mc1322x: build fixes for uart2
2011-07-08 19:40:42 -04:00
Mariano Alvira
e2d74fa0a5
Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into uart-upstream
...
Conflicts:
cpu/mc1322x/lib/include/uart.h
cpu/mc1322x/src/default_lowlevel.c
2011-07-08 19:21:15 -04:00
David Kopf
6ea7250af7
Change ctimer startup order, add multihop to wpcap and minimal-net platform.
2011-06-30 12:12:07 -04:00
David Kopf
c48b7ab78d
Add RPL nodes and border router to minimal-net platform (cygwin only)
2011-06-28 08:19:48 -04:00
David Kopf
6b434a553f
Implement SRAM routine of Georg von Zengen
2011-06-21 13:03:58 -04:00
Joakim Eriksson
af601dfb23
improved support for IAR compiler for z1
2011-06-05 00:21:47 +02:00
Mariano Alvira
33b32c61e9
Only insert an ack packet if the ack request bit is set
2011-06-01 13:47:05 -04:00
Joakim Eriksson
77ec0bfa0f
fixed the z1 platform and generic code used by z1 to work with IAR compiler
2011-05-25 17:21:51 +02:00
Mariano Alvira
724bcbd2d3
Merge remote branch 'libmc1322x/master'
...
Conflicts:
cpu/mc1322x/src/default_lowlevel.c
2011-05-14 21:19:47 -04:00
Joakim Eriksson
fd75050c67
Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki
2011-05-13 11:53:45 +02:00
Joakim Eriksson
2c16538e6a
fixed support for IAR compiler
2011-05-13 11:52:42 +02:00
Salvatore Pitrulli
7a48110067
STM32W flasher utilities for Linux and Windows merged into a single folder.
2011-05-10 19:26:33 +02:00
Mariano Alvira
0a2b86456b
add option to insert an ack packet on autoack
2011-05-08 09:50:57 -04:00
Mariano Alvira
65671c66c6
turn on insert ack packet by default
2011-05-08 09:50:57 -04:00
Joakim Eriksson
3fa8da5ddf
fixed IAR compilation paths
2011-05-02 15:19:28 +02:00
Salvatore Pitrulli
5eabf33211
Added functions for deep sleep to mbxxx platform.
2011-04-27 18:12:23 +02:00
Mariano Alvira
d80449244d
Merge remote branch 'libmc1322x/master'
2011-04-20 21:23:47 -04:00
Salvatore Pitrulli
01a7a78a94
Fixed temperature ADC conversion bug on mbxxx.
...
The conversion was made from an incorrect source when
the GPIO pin was not PB7.
Added functions and macros used to select the correct
ADC channel.
2011-04-20 18:06:20 +02:00
Salvatore Pitrulli
aa968309af
Merge remote branch 'sf/master'
2011-04-16 16:27:10 +02:00
Niclas Finne
813489633c
Added missing include
2011-04-15 15:49:43 +02:00
Salvatore Pitrulli
4ff82b76e5
Removed -fsigned-char GCC compiler options.
2011-04-14 08:12:11 +02:00
Salvatore Pitrulli
0105057c44
Removed unwanted file.
2011-04-14 08:10:58 +02:00
Salvatore Pitrulli
0a0ad39c9b
Added weak symbols for STM32W exception handlers and other minor updates for the HAL.
2011-04-14 08:06:13 +02:00
Salvatore Pitrulli
57163c616d
Removed some warnings.
2011-04-14 08:05:21 +02:00
Salvatore Pitrulli
af8e58e063
Set LED pins to output when MB851 is in sleep mode.
...
This reduces power consumption.
2011-04-13 18:14:12 +02:00
dak664
2e14df3981
Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6.
2011-04-08 15:15:16 -04:00
Salvatore Pitrulli
6655c876f2
Added functions and example for deep sleep on mb851.
...
The added function let a process to make the system go
into deep sleep for maximum power saving.
The udp-ipv6-example shows how to use these new functions.
2011-04-08 11:53:48 +00:00
dak664
89741bd322
Exit on watchdog reboot call
2011-04-07 17:47:54 -04:00
dak664
581d081ffe
Don't use RF230_CONF_CCA_THRES if it is not defined.
2011-04-07 17:44:10 -04:00
Joakim Eriksson
f603c965c1
Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki
2011-04-06 20:15:44 +02:00
Joakim Eriksson
928bf6b6c1
fixed cpu/msp430 for compilation with IAR compiler
2011-04-06 20:08:48 +02:00
Mariano Alvira
4f4e06c71b
Merge remote branch 'libmc1322x/master'
2011-04-06 05:56:06 -04:00
Oliver Schmidt
5da4faf71e
Allow VC++ to be used as alternative to GCC for building in the WIN32 target.
...
TODOs:
- Update README
- Add dependency handling
- Add rtimersupport
2011-04-03 22:32:11 +02:00
Oliver Schmidt
f83fb3704b
Replaced make-empty-symbols with empty-symbols.[c|h]
...
The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.
2011-04-03 13:24:58 +02:00
dak664
a9cbbb4570
Add sneezer mode and tx power change
2011-03-23 18:08:07 -04:00
Mariano Alvira
11f5bca7c4
Merge remote branch 'libmc1322x/master'
...
Conflicts:
cpu/mc1322x/board/redbee-econotag.h
2011-03-22 16:28:08 -04:00
Salvatore Pitrulli
eb588f1aec
New HAL and SimpleMAC for STM32W108.
2011-03-22 19:35:49 +01:00
dak664
5dd7500d0b
Add configurable auto cca threshold and implement driver cca call.
...
Show smallest rssi in jackdaw menu.
2011-03-21 11:10:30 -04:00
dak664
d9b5bac953
Refactor with WATCHDOG_CONF_TIMEOUT
2011-03-14 16:14:47 -04:00
Mariano Alvira
74517b9df4
Merge remote branch 'libmc1322x/master'
2011-03-13 17:14:32 -04:00
dak664
59109b9893
Fix type, diagnostic interrupt code on conditional
2011-03-13 14:08:02 -04:00
dak664
a210e14d78
Add defines for watchdog configuration.
2011-03-13 13:45:12 -04:00
dak664
0b2d3d1615
Refactor clock code with optional interrupt optimizing.
...
Put periodic radio calibration on conditional.
2011-03-13 13:07:32 -04:00
dak664
0573ecd62f
Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki
2011-03-11 16:51:10 -05:00
dak664
bf5be5056f
Testing $OS works with cygwin and DOS command windows
2011-03-11 16:50:35 -05:00
Mariano Alvira
f2b92cfa98
mc1322x: remove bad rule from cpu Makfile
2011-03-11 16:32:25 -05:00
Mariano Alvira
59d7fad746
Merge remote branch 'libmc1322x/master'
2011-03-11 16:28:14 -05:00
dak664
6a5c8ff1c4
Include file needed for slip rpl-border-router build
2011-03-11 14:10:30 -05:00
Mariano Alvira
a1ae79307b
mc1322x: remove auto reception mode as it appears to be the cause of
...
the periodic autoack checksum errors. removing auto mode doesn't seem
to create any performance issue.
2011-03-11 06:28:47 -05:00
dak664
bb574fd1e2
Don't create an object directory if target does not exist
2011-03-10 14:59:21 -05:00
Mariano Alvira
5208aa14ea
mc1322x: remove auto reception mode as it appears to be the cause of
...
the periodic autoack checksum errors. removing auto mode doesn't seem
to create any performance issue.
2011-03-08 15:36:53 -05:00
dak664
de7bcda99f
avrdude and makefile changes suggested by Georg von Zengen
2011-03-08 13:07:00 -05:00
Mariano Alvira
fa08b09770
Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into update-lib
2011-03-07 12:37:26 -05:00
Mariano Alvira
2c79ab4962
mc1322x: increase the heap to 4K
2011-03-05 16:52:35 -05:00
Mariano Alvira
befbd4a479
mc1322x: handle board file differently if cygwin
2011-03-04 16:54:59 -05:00
Fredrik Osterlind
dd7cec737d
removed obsolete leds_[color]() functions, replaced by leds_{on,off}()
...
allow LEDS_[COLOR] to be configured by platform-conf
2011-03-03 17:48:32 +01:00
Mariano Alvira
f0c27340c6
mc1322x: increase the HEAP to 2048 bytes: needed for COAP server.
2011-02-25 16:10:08 -05:00
Mariano Alvira
bea643bc4a
mc1322x: flush the radio rx queue in the receive process
2011-02-23 15:19:45 -08:00
Mariano Alvira
c12ab0d484
mc1322x: get the tx status for a packet and return the proper response.
2011-02-23 15:19:44 -08:00
Mariano Alvira
535b9d35d7
mc1322x: disable broken maca calls for now.
...
maca_on, maca_off, and contiki_maca_init don't work correctly;
they mess up address filtering.
disable them for now and fix them later.
2011-02-23 15:19:44 -08:00
dak664
46297de770
Allocate variable only when mass storage is enabled
2011-02-23 14:06:06 -05:00
Mariano Alvira
c857e57d2f
msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h
2011-02-21 09:23:52 -08:00
Mariano Alvira
8f9cf50e55
set timestamp packet attribute
2011-02-18 12:46:34 -05:00
Mariano Alvira
a86a0fbe0e
set lqi packet attribute
2011-02-18 12:46:10 -05:00
Mariano Alvira
07f77b02eb
Merge remote branch 'libmc1322x/master'
2011-02-18 12:38:30 -05:00
Mariano Alvira
2e331b51e8
Merge remote branch 'libmc1322x/master' into update-libmc1322x
...
Conflicts:
cpu/mc1322x/COPYING
2011-02-17 14:41:47 -05:00
Mariano Alvira
2e33e1694a
Merge branch 'libmc13-9f82e068' into update-libmc1322x
2011-02-17 14:39:20 -05:00
Mariano Alvira
7cdfbb0947
remove cvs keywords from cpu/mc1322x
2011-02-17 14:36:55 -05:00
Mariano Alvira
bfb471c782
add proper arm flags and remove Makefile.src as it's not used.
2011-02-08 09:55:50 -05:00
Mariano Alvira
b1dd3fc063
use the CS toolchain by default:
...
http://www.codesourcery.com/sgpp/lite/arm/portal/release642
2011-02-08 09:55:23 -05:00
Mariano Alvira
81552d1f6d
add a tutorial for rest-example
2011-02-08 09:08:05 -05:00
Mariano Alvira
5c3ef556d9
add a dummy io.h for mc13224v
2011-02-08 09:07:54 -05:00
Mariano Alvira
f5ba70cd20
add heap and _sbrk to mc13224v
2011-02-08 09:07:23 -05:00
Mariano Alvira
9572baa71b
fix mc13224v led driver to only touch gpio used for leds.
2011-02-08 09:07:11 -05:00
dak664
5c098993df
Add initial file
2011-02-07 20:30:47 -05:00
dak664
b41e8f384e
Add initial atmega128rfa1 file
2011-02-07 20:28:17 -05:00
dak664
f1f32c8e6a
Add combined MCU and radio ATmega128rfa1
2011-02-07 13:46:34 -05:00
Mariano Alvira
2a75a4a5df
this fixes a major problem with the maca_process
...
Before it didn't do process_poll like it should and would add events
out of turn and mess up the event processor --- that would cause the
button to stop working after the unhandled events exceeded a max
number
this fixes maca_process to do a process_poll as it should. now the
button works fine and so does the radio.
2011-02-03 18:09:51 -05:00
oliverschmidt
8c87f85a1d
Made cc65 build compatible with make.exe from GnuWin32 and cmd.exe. We just live without the phony targets when building with cmd.exe - the next cc65 release will make the whole sed thingy obsolete anyway :-)
2011-01-23 16:30:30 +00:00
joxe
801a7e1149
fixed bug with uart DMA
2011-01-19 20:44:20 +00:00
salvopitru
5fcae86be3
Now it is putchar that has to be redefined (instead of __io_putchar), like other platforms.
2011-01-19 09:13:06 +00:00
adamdunkels
8f283b3989
Bugfix
2011-01-19 07:30:31 +00:00
adamdunkels
6f076dbe1a
A set of compiler options that reduce the size of the final code size and RAM usage with ~10%. Courtesy of Simon Duquennoy.
2011-01-19 07:24:37 +00:00
maralvira
68180c0574
use network 230 --- 802.15.4 no-FCS
2011-01-18 16:58:18 +00:00
adamdunkels
bb2e3b25bd
Larger default DMA tx buffer size, to allow SLIP operation. Warn if DMA is enabled, since MSPsim does not yet support it.
2011-01-18 16:07:16 +00:00
maralvira
ce92a90e58
new timer setup routines.
2011-01-17 15:51:19 +00:00
maralvira
b3c8c14b7d
add timer setup routines
2011-01-17 15:51:02 +00:00
maralvira
ca098db611
fix a race condition regarding advancement of the softclock. Without
...
this, the advancment would fail to trigger a tx cycle
occasionally. This would cause the packet to get deferred until the
next expiration of the softclock.
2011-01-17 15:49:17 +00:00
maralvira
40bb4b80dc
whitespace fixup to sync with libmc1322x
2011-01-17 15:48:39 +00:00
maralvira
6fb75263f9
fix parsing and pcap generation for packets with multiple output lines
...
(those that are > 16 bytes).
2011-01-17 15:47:23 +00:00
maralvira
d82b004154
fix parsing and pcap generation for packets with multiple output lines
...
(those that are > 16 bytes).
2011-01-17 15:47:08 +00:00
maralvira
d0227afbed
cycle channel on keypress.
2011-01-17 15:46:27 +00:00
maralvira
c78e1e345e
add stdint.h
2011-01-17 15:45:02 +00:00
maralvira
0445a4f78f
add cmdline options to set the intercharacter delays.
2011-01-17 15:44:18 +00:00
maralvira
fb8c08ca7c
only use these stubs with linux toolchains
2011-01-17 15:42:24 +00:00
salvopitru
9aa734936f
RANDOM_MAX changed to RANDOM_RAND_MAX.
2011-01-17 10:08:14 +00:00
salvopitru
fb75503624
'BTM' can be defined to flash devices already in bootloader mode.
...
COFFEE_FILES changed to COFFEE.
2011-01-17 09:41:47 +00:00
salvopitru
a9b1b37bec
Added definition of BAUD2UBR macro.
2011-01-17 09:22:24 +00:00
adamdunkels
f002563e60
Tx on interrupts occasionally misses characters on output. Therefore we turn it off by default.
2011-01-09 20:44:14 +00:00
ksb
eb24078ffb
Converted CRLF line endings to LF
2011-01-05 17:16:42 +00:00
joxe
5b7b3da99c
minor fixes of DMA uart code
2011-01-05 13:36:38 +00:00
joxe
565fda47aa
added initial uart1 DMA rx support and required LPM requirements api
2011-01-05 12:02:01 +00:00
dak664
90a6d768ea
Keep track of sleeptime and display on status web page.
2010-12-23 19:41:07 +00:00
dak664
662b0e064c
Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes.
2010-12-22 22:49:16 +00:00
dak664
95982b40ba
$make will show avr-size once and only once whether or not a build needs to occur.
2010-12-22 21:13:09 +00:00
dak664
5b8e62ef4f
Patches from R Larsson
2010-12-22 20:10:00 +00:00
dak664
013c3ac2f8
Remove contitional on clock updating, it should always be done after a sleep!
2010-12-22 17:09:03 +00:00
dak664
44a2e34005
Resolve TIMER2 conflict between sleep and possible clock usage.
2010-12-22 16:50:30 +00:00
dak664
e3e1e04948
Add FCS comments and text2pcap dump routines of Roger Larsson.
...
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664
e4b0b3dc8c
Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will.
2010-12-18 20:51:11 +00:00
dak664
5623ad827b
Enable radio off and sleep modes.
2010-12-18 20:49:00 +00:00
adamdunkels
f370b217a5
Turned up the rtimer resolution to 32678 Hz.
2010-12-16 22:50:21 +00:00
adamdunkels
1d090ea0f5
Made configuration of CC2420 SFD timestamps easier
2010-12-16 22:49:33 +00:00
adamdunkels
c0fedd7661
Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module
2010-12-16 22:49:12 +00:00
dak664
570f6e705f
Move conditional needed by previous commit.
2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
salvopitru
d0db3fc39a
Added a check for Coffee start address.
2010-12-15 15:01:00 +00:00
dak664
1cc336f188
Conditional code to use hardware multiply by default.
2010-12-15 14:11:06 +00:00
salvopitru
5fe80dd99d
Added elfloader machine dependent code for STM32W.
2010-12-15 11:10:20 +00:00
dak664
c784e8bc46
Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register
2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9
Return TRAC_STATUS register when tx autoretry is enabled.
2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
21b10e8021
Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schfer
2010-12-03 18:16:56 +00:00
dak664
0ba9846abd
Add macros by Roger Larsson to select between hardware or software SPI transactions.
...
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
nifi
7110afdad5
added missing include
2010-11-27 15:27:20 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
adamdunkels
149f4e8d21
Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers
2010-11-25 09:22:56 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
adamdunkels
4fac3037e0
Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash.
2010-11-15 21:52:54 +00:00
dak664
69ef9d57eb
sizeof(*) is sizeof first array element
2010-11-12 17:24:36 +00:00
dak664
9e94ba9803
Allow non-ipv6 build, e.g. Hello World
2010-11-12 17:15:00 +00:00
nifi
5de83c9085
Only include code for stack printouts when needed
2010-11-12 15:54:41 +00:00
maralvira
3426eae031
fix typos
2010-11-11 20:37:33 +00:00
maralvira
9b2a2bb5e6
fix up stdint include
2010-11-10 22:12:29 +00:00
maralvira
6da84819dd
use stdint.h instead of custom types.h
...
stdint.h is more portable across compilers
2010-11-10 22:06:28 +00:00
maralvira
e229022f38
include crm.h
2010-11-10 21:58:12 +00:00
salvopitru
28e1445a0f
Added a simple implementation of Coffee for STM32W108.
2010-11-10 11:20:44 +00:00
maralvira
dfbc81158b
Allow CROSS to be overridden with CROSS or CROSS_COMPILE
2010-11-09 13:13:45 +00:00
maralvira
1aac14f252
add tutorial explaining how to set up an RPL network of econotags
2010-11-09 01:30:01 +00:00
maralvira
3b515587c5
change how prepare and transmit work --- Contiki expects to call
...
prepare once and then transmit many times to repeat the same packet
over and over. This didn't work like that, but now it does.
2010-11-07 20:07:42 +00:00
maralvira
e029fa8da0
fix defines for raw mode
2010-11-07 18:34:52 +00:00
maralvira
4664151419
fix build errors with start.S
2010-11-07 15:19:45 +00:00
maralvira
29333232d5
add section .start and undef _start so that _start is placed by the
...
linker correctly
2010-11-07 14:57:53 +00:00
maralvira
b8ebce0fef
add a memory section for RAM so that the linker will warn when you've
...
made your program too big.
2010-11-07 14:54:05 +00:00
maralvira
8385536c41
fix how start object is linked
2010-11-07 14:52:23 +00:00
maralvira
f38598ce9f
clear BSS
2010-11-07 14:49:42 +00:00
maralvira
57513948c9
Move stack near BSS so it doesn't take up space in the .bin
2010-11-07 14:48:52 +00:00
maralvira
77cf0f0f5e
update ring_osc_on and _off to the new bit structs
2010-11-07 14:42:31 +00:00
maralvira
c8056cc4e2
define TCF TCF1 and TCF2 --- the new bit structs don't work here for
...
some reason.
2010-11-07 14:42:02 +00:00
maralvira
dab7faf13c
Add gpio_set and gpio_reset
...
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
2010-11-07 14:29:04 +00:00
maralvira
4a4a39c84a
Name the GPIO structure so we can set multiple bits at once
2010-11-07 14:28:30 +00:00
maralvira
4217eb2ebc
Provide a function to change timer interrrupt handlers
...
Function irq_register_timer_handler(int timer, void (*isr)(void))
lets you change the handler at runtime. This lets us set handlers
without necessarily knowing the name at link-time. The old way of
having weakly-linked tmr0_isr functions should still work.
2010-11-07 14:27:01 +00:00
maralvira
65d3942c76
Add the disable_int({}) macro
...
This is similar to safe_irq_enable and disable
2010-11-07 14:26:24 +00:00
maralvira
83e6995af1
Add TMR_ADDR helper
2010-11-07 14:25:07 +00:00
maralvira
d930ce0e2b
Add some useful timer macros
2010-11-07 14:24:36 +00:00
maralvira
5e00219a9c
Register definitions: get rid of some macro magic that doesn't help much
...
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
2010-11-07 14:24:11 +00:00
maralvira
091e4cd84e
Add structure-based ITC access
2010-11-07 14:23:15 +00:00
maralvira
11ac20a361
REF_OSC is a 32-bit number, not 64-bit number
2010-11-07 14:22:51 +00:00
maralvira
745e7b5ac2
Add cal_isr() support
2010-11-07 14:21:59 +00:00
maralvira
ab84453401
Add structure-based CRM definitions
2010-11-07 14:21:33 +00:00
maralvira
9d072d5309
Add macro to help compute TMR.ENBL values (useful when using #defined
...
values to represent timers)
2010-11-07 14:21:06 +00:00
maralvira
85e6b06175
Add pin definitions for each timer, they're fixed
2010-11-07 14:19:17 +00:00
maralvira
8d2f740f7f
Fix #ifdefs in board files
2010-11-07 14:18:54 +00:00
maralvira
3726588f02
Add structure-based GPIO register definitions
2010-11-07 14:17:45 +00:00
maralvira
20b477db13
Add structure-based timer register definitions
2010-11-07 14:17:20 +00:00
maralvira
c71a0243ff
Add missing type for TMR0_COMP2
2010-11-07 14:16:28 +00:00
maralvira
62a45c7ba2
Add script to invoke kermit with a particular port and speed
2010-11-07 14:15:40 +00:00
maralvira
2ac88222f6
Use "rm -f" in clean rules to ignore errors
2010-11-07 14:14:47 +00:00
maralvira
2e87143381
use kermit in open-terms
2010-11-07 14:13:22 +00:00
maralvira
c8be3047c3
fix byte ordering in burn-macs
2010-11-07 14:12:55 +00:00
maralvira
0450b3fd90
add script that burns the mac address only --- mac address is Redwire
...
IAB + tty number.
2010-11-07 14:12:27 +00:00
maralvira
f913cf728b
modify flasher.c to not create a vaild boot magic number if the length
...
of the file is zero
modify mc1322x-load.pl to optionally send a zero length file with -z;
extra data on the command line is still written.
This allows you to burn the mac adress without flashing a vaild image.
2010-11-07 14:11:50 +00:00
maralvira
9f7d860e9c
add scripts to help load a bunch of econotags
2010-11-07 14:11:18 +00:00
maralvira
8b2ef2675d
discard received packets --- this lets you run multiple rftest-tx's at
...
the same time.
2010-11-07 14:10:16 +00:00
maralvira
e00349509d
add simple install rule
2010-11-07 14:09:43 +00:00
maralvira
ee943c062d
add autoreset command and do_exit option
2010-11-07 14:08:50 +00:00
maralvira
e886e83908
fix bug in print_packet
...
Thanks dean and jim.
2010-11-07 14:07:33 +00:00
maralvira
f1fede7090
get LQI of received packets
2010-11-07 14:06:57 +00:00
maralvira
ae0b7f846f
Fix the CNTR defines.
...
Thanks to Ruslan for finding this.
2010-11-07 14:04:59 +00:00
maralvira
646a37f8b3
use the hardware random number generator
2010-11-07 13:52:12 +00:00
dak664
eb0d5c7f45
Add missing includes
2010-11-03 16:55:40 +00:00
oliverschmidt
1dfe490f9b
Use some defined event constant instead of just 0.
2010-10-31 22:51:17 +00:00
dak664
9194b3ac69
Fix error when RS232 not enabled
2010-10-28 19:31:28 +00:00
dak664
ad6712736b
Fix Windows XP RNDIS+CDC serial port enumeration
2010-10-28 19:30:14 +00:00
dak664
258e3cc93a
Allow simultaneous use of RS232 and USB serial ports
2010-10-27 14:51:20 +00:00
salvopitru
d8711d32a3
Added configuration in order to run Rime.
2010-10-27 14:05:23 +00:00
salvopitru
db3f1864a0
Increased minimum stack size, because rpl uses it much more.
2010-10-26 11:07:20 +00:00
salvopitru
33ccbbb509
Fixed compile error raised after rand.c removal.
2010-10-26 10:47:23 +00:00
salvopitru
444a00949a
Added missing libraries.
2010-10-26 10:24:17 +00:00
salvopitru
790f13a689
More safe detection of cygwin path.
2010-10-26 07:26:40 +00:00
salvopitru
ec5e3ce0d7
New Contiki port to STM32W108.
2010-10-25 09:03:38 +00:00
adamdunkels
34f6a60a4a
By default, don't print stack on reboot, since there are cases where this may hang the CPU (when the CPU is in LPM when the watchdog triggers). Must fix the code to set the UART and CU into correct modes before enabling stack printout on reboot.
2010-10-24 21:10:25 +00:00
oliverschmidt
9a8c62a629
Removed remark on using cc65 snapshot.
2010-10-23 19:42:53 +00:00
dak664
123e3cae41
Fix compiler warnings
2010-10-23 15:26:46 +00:00
oliverschmidt
5e10cf2eed
Implemented cfs_opendir() and friends for CBMs based on cc65's cbm_opendir() and friends.
2010-10-23 13:48:06 +00:00
oliverschmidt
9e9eb4b55c
There's no point in pulling in cfs-posix-dir.c if the POSIX functions it depends on are dummies anyway.
2010-10-23 08:17:45 +00:00
oliverschmidt
b84f771c6b
The recent change in core/net/mac/lpp.c requires CLOCK_SECOND to be at least twice NETSTACK_RDC_CHANNEL_CHECK_RATE in order to compile.
2010-10-22 20:28:58 +00:00
dak664
7be7a34bbb
Fix windows COM port enumeration
2010-10-22 19:15:43 +00:00
dak664
774474b7aa
Fix compiler warning
2010-10-20 18:57:33 +00:00
oliverschmidt
842c6a018a
The recent global change regarding htons allowed to remove this hack :-)
2010-10-19 20:30:47 +00:00
adamdunkels
5585d72c86
A simple but substantial change: uIP used the htons()/HTONS() macro
...
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.
This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
oliverschmidt
35f7b6046e
Fixed 'Modulo operation with zero' error by making sure that NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE is not smaller than CLOCK_CONF_SECOND.
2010-10-06 19:48:26 +00:00
oliverschmidt
a40594b7ce
Display correct name of statically loaded driver.
2010-09-29 21:48:54 +00:00
oliverschmidt
c839eacbdf
Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/ .
2010-09-29 19:44:01 +00:00
oliverschmidt
55d61d317b
Allow cc65 ethernet drivers to be loaded statically instead of dynamically. This saved quite some space in scenarios without additional cc65 drivers to be loaded for i.e. a mouse because in those scenarios the cc65 module loader isn't necessary. And without the module loader typically the cc65 heap manager isn't necessary.
2010-09-28 23:02:16 +00:00
adamdunkels
7c14899eeb
Made stack printout on reboot configurable.
...
Added the ability to turn on watchdog multiple times - the watchdog
registers are touched only when the watchdog goes from off to on state
to avoid retriggering the watchdog when it shouldn't.
2010-09-22 22:12:37 +00:00
dak664
110bc0242e
Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum
2010-09-17 21:59:09 +00:00
nifi
f5ea831445
Added function rtimer_arch_now that makes sure that the timer value does not change between readouts to avoid reading while the timer is being updated.
2010-09-13 20:51:09 +00:00
maralvira
1cb0762bd0
Don't post from an interrupt context --- this resulted in process
...
corruption if a packet was received at the wrong time.
The maca_thread now just PAUSEs and checks rx_head instead of waiting
for a data event to be posted.
2010-09-13 14:15:58 +00:00
joxe
c0549cad3d
added some files for MSP430X I/O
2010-08-24 16:23:20 +00:00
maralvira
df9d43ab83
increase the reception time now that tx_packet will advance the timer
...
as necessary.
2010-07-28 18:49:34 +00:00
maralvira
9a7a2742b3
remove bad call to maca_on()
...
maca_on() resets the maca and phy, takes a long time, and clobbers any
packet that is currently being transmitted or received. It doesn't
belong in prepare and was the source of a lot of latency and bad
packet transmissions.
Make sure the maca is on somewhere else.
2010-07-28 18:48:51 +00:00
maralvira
a3b9c2adb0
in tx_packet, force an interrupt if the maca isn't doing anything so
...
that the transmit starts. Or if the maca is in a reception cycle,
advance the softclock timeout to now so that transmission starts as
soon as possible (immediately if a packet isn't being received or
right after reception finishes).
2010-07-28 18:48:03 +00:00
maralvira
593a50c38f
make the debug prints in check_maca more specific
2010-07-28 18:47:35 +00:00
maralvira
422d05003f
use 32 packets in the pool by default
2010-07-28 18:47:05 +00:00
maralvira
eb0e3b7989
fix long standing bug where the last pages of NVM were not erased
...
properly.
2010-07-28 18:43:04 +00:00
oliverschmidt
c602c61468
Activated Platform-specific File System (PFS) for the C64/C128 by default for all programs with R/W CFS access.
2010-07-22 10:30:12 +00:00
oliverschmidt
9c0f5d857c
Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t.
2010-07-21 22:35:59 +00:00
maralvira
5b44d6a29a
properly drop characters when buffer is full
...
fix by David Kopf
2010-07-06 13:39:34 +00:00
joxe
0c5390339f
updated to new cc2420 spi naming
2010-06-23 10:44:41 +00:00
joxe
705f8cc451
fixed naming of SPI and CC2420 related code
2010-06-23 10:19:15 +00:00
dak664
898c00b812
Remove usually extra avr-size command
2010-06-22 17:11:38 +00:00
dak664
e45b1c042b
TIMER2 uses TIMER2 interrupt vector!
2010-06-22 16:17:24 +00:00
dak664
ab7f3bd8e3
Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen.
2010-06-18 17:30:30 +00:00
dak664
cb45883970
Turn on DEBUGFLOW and software CRC computation
2010-06-18 15:44:53 +00:00
nifi
20c8b4f9c6
removed obsolete comments
2010-06-15 13:30:42 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
maralvira
419906a769
initial mc1322x commit
...
based on commit aac3a355451d899f02737f2907af8c874ee4feba of
git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-10 14:55:39 +00:00
maralvira
285f508cc9
initial commit of src files
2010-06-10 14:49:31 +00:00
maralvira
bf9f960bbe
add board files.
2010-06-10 14:48:32 +00:00
maralvira
1145fa9ba9
initial mc1322x commit
...
based on commit aac3a355451d899f02737f2907af8c874ee4feba of
git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-09 14:43:22 +00:00
oliverschmidt
d28865abac
Adjusted hacky inline assembler to reference uip_aligned_buf instead of uip_buf - some day I'll need to clean up that (btw bogus) code.
2010-05-30 10:12:30 +00:00