fros4943
3d7e732286
removed sky_deluge test output: file is generated when test is performed
2009-02-26 13:51:37 +00:00
fros4943
6b9f103c65
added mote relation interface to default contiki mote config
2009-02-26 13:49:58 +00:00
fros4943
b059155e51
added mote relation interface to emulated sky nodes
2009-02-26 13:48:08 +00:00
fros4943
a8838d7b17
make sure node interfaces are initialized when generating toString()
2009-02-26 13:45:58 +00:00
fros4943
c2279d6c81
print debugging info when mote interface fails to load
2009-02-26 13:36:15 +00:00
fros4943
e73c48a826
added mote relation support. used to show relations between simulated motes, typically for debugging and visualization purposes
2009-02-26 13:35:45 +00:00
fros4943
46bd43579b
added mote relation interface. used to show relations between simulated motes, typically for debugging and visualization purposes
2009-02-26 13:31:25 +00:00
fros4943
16bec06558
basic visualizer with support for painting mote relations
2009-02-26 13:29:30 +00:00
nvt-se
31bc37a043
Added Deluge and tests for it.
2009-02-25 17:00:00 +00:00
fros4943
5b258ce104
minor bugfix: not all mote type identifiers were reserved when reloading simulation. this caused loading some simulations with several mote types to fail
...
+ added key accelerator for reloading a simulation (ctrl+r or ctrl+shift+r). thanks to David Gustafsson for patching :)
+ added yet another key accelerator for starting/stopping simulation (ctrl+s)
2009-02-25 16:11:59 +00:00
nifi
6f8ec800c5
removed some stuff from the avrora jar
2009-02-25 15:20:22 +00:00
fros4943
58a2af680a
renamed strange last name to start with O instead of Ö
2009-02-25 14:46:22 +00:00
fros4943
f6b8fdc2a8
added very simple sky ipv6 test: exercises the examples/udp-sender-ipv6 and examples/udp-receiver-ipv6 code
2009-02-25 12:14:19 +00:00
fros4943
9c024f19e0
updated reference to moved plugin class VisUDGM. enables importing tests graphically again.
2009-02-24 16:01:32 +00:00
fros4943
e7d1d7eba7
deleting reference to moved plugin class VisUDGM
2009-02-24 15:56:58 +00:00
fros4943
ab01f2b901
added new radio medium: directed graph radio medium (short: dgrm).
...
this radio medium will likely later be used to implement other more complex radio mediums such as udgm and mrm.
currently the user interface (dgrm config plugin) for defining radio links is very limited.
experimental: the new radio medium supports propagation delays, configurable via the plugin.
2009-02-24 15:29:52 +00:00
fros4943
e87d94439e
added experimental per destination propagation delay in radio connections. uses cooja time events to delay radio events.
...
currently only delaying the four main events: reception started, packet delivery, byte delivery, and reception ended
note that propagation delay is not yet implemented for all radio events - interfered radios will for example still be interfered immediately
2009-02-24 15:12:22 +00:00
fros4943
28ace6d912
added toString method
2009-02-24 15:09:07 +00:00
fros4943
0bb6e99326
added method returning all motes, instead of using getMote(int) method
2009-02-24 15:08:20 +00:00
fros4943
06ed4d3f0a
added experimental per destination delay
2009-02-24 15:07:01 +00:00
fros4943
c2f7780b68
radio signalling moved to abstract radio medium
2009-02-24 15:05:36 +00:00
joxe
bb1bd3a706
added radio communication between micaz nodes
2009-02-24 07:49:42 +00:00
joxe
1da3c2544c
moved Avrora motes into the mspsim array and renamed
2009-02-23 08:33:23 +00:00
joxe
f8ea34a689
added avrora to buildpath
2009-02-22 16:50:42 +00:00
joxe
8be8d92923
added avrora-micaz node emulation
2009-02-22 16:45:01 +00:00
fros4943
0905ef7134
separated udgm visualizer class from the udgm
2009-02-21 09:49:40 +00:00
fros4943
7c86f70573
test template used by configuration wizard
2009-02-20 16:59:52 +00:00
fros4943
d95c26b49e
deleting build output before recompiling
2009-02-20 16:51:00 +00:00
fros4943
660167b39b
added configuration wizard to replace the jni_tests
2009-02-20 16:50:16 +00:00
fros4943
7a216dc837
made two static methods public
2009-02-20 16:49:43 +00:00
fros4943
264529708e
sorting plugin menu according to plugin type
2009-02-18 17:25:14 +00:00
fros4943
11734b3c3b
minor fixes + added script line numbers
2009-02-18 16:43:42 +00:00
fros4943
91a68128d3
added error info at incorrect contiki path
2009-02-18 16:11:14 +00:00
fros4943
0e9add68ce
remove new motes without stopping simulation: from timevent invoked by simulation loop
...
enables test scripts to remove new motes
2009-02-18 16:01:31 +00:00
fros4943
d458fe79b5
add new motes without stopping simulation: from timevent invoked by simulation loop
...
enables test scripts to add new motes
2009-02-18 15:57:47 +00:00
fros4943
472ecf2120
added progress bar while scanning contiki (may take several seconds)
2009-02-18 15:02:32 +00:00
fros4943
e3264d2e00
added manual positioner to default config
2009-02-18 13:59:08 +00:00
fros4943
a9701e0b62
added manual positioner: allows user to manually enter every mote position
2009-02-18 13:55:51 +00:00
fros4943
dc48615e51
do not dispose add mote dialog if positioner fails, simply abort
2009-02-18 13:55:24 +00:00
fros4943
8ddaf79361
added debugging output when positioner fails
2009-02-18 13:55:01 +00:00
fros4943
9e9b712e5d
removed example mote type implementation from default configuration
2009-02-18 12:12:53 +00:00
fros4943
00273dce75
minor changes and documentation regarding using random generators in Cooja
2009-02-18 12:07:19 +00:00
fros4943
cc56325300
main random generator must not be used for setup tasks such as node positioning
2009-02-18 11:49:54 +00:00
fros4943
fbb09061c8
example mote implementation uses main random generator
2009-02-18 10:41:50 +00:00
fros4943
00c88ca2d3
removed creating unnecessary random generator
2009-02-18 10:40:25 +00:00
fros4943
e907e4dace
quickstart uses main random generator
2009-02-18 10:35:31 +00:00
fros4943
d530b44e5a
using main random generator
2009-02-18 10:11:32 +00:00
fros4943
3c83d14059
clearing test log when reactivated
2009-02-18 10:11:11 +00:00
fros4943
8e9686e01d
added option to make random seed automatically generated at simulation load
...
+ a single random generator instance is used instead of sharing seed between different parts of the simulator
2009-02-18 10:09:32 +00:00
fros4943
ffcf7fc43b
added some commonly used mote actions in right-click menu: show leds and serial port.
...
+ dragndrop stub methods
2009-02-17 14:09:51 +00:00
fros4943
411d92a297
minor fix: only reporting test ok if test did not already fail
2009-02-17 12:58:13 +00:00
fros4943
663a0b2c9b
increased test timeout and also comparing number of received notifications vs sent notifications
2009-02-17 12:53:59 +00:00
fros4943
0ae2ac378e
explicit "bash -c" no longer needed
2009-02-17 11:54:18 +00:00
fros4943
43d21e6e31
forcing all commands to be parsed/executed by bash to simplify multiple make commands
2009-02-17 11:47:12 +00:00
fros4943
4bf96fba26
updated test to transfer files over a multihop link, to use NULLMAC, and to clean before and after building the sources
...
NULLMAC is used mainly to reserve ROM
2009-02-16 12:40:28 +00:00
fros4943
71836a0f8e
split command into arguments is unnecessary
2009-02-16 12:37:18 +00:00
adamdunkels
bed1b4cc4f
Changed to use sky-checkpoint.c instead of sky-shell.c since checkpointing was disabled in sky-shell.c
2009-02-15 08:45:30 +00:00
adamdunkels
9b23d1553e
Removed left-over log output
2009-02-08 21:06:23 +00:00
adamdunkels
0d1e7e9b32
Improved parsing of serial data and output
2009-02-08 19:38:22 +00:00
adamdunkels
54b4226f70
Nightly test that runs Contiki's shell collect command in much the same way as the Contiki collect program does
2009-02-08 19:34:34 +00:00
fros4943
2d671a1265
Nimbus look and feel is not fully supported on many linux platforms:
...
* changing default look and feel to cross platform l&f on linux systems
2009-02-08 18:33:05 +00:00
fros4943
3fcd77f522
increased default java memory allocation for contiki tests
2009-02-07 17:24:15 +00:00
joxe
4b78e80bda
added MAC address setting - setNodeID in SkyNode
2009-02-07 16:38:51 +00:00
adamdunkels
29ec3b02f5
A nightly test of the Rime collect protocol on the sky platform
2009-02-07 16:18:25 +00:00
adamdunkels
cf57c8189f
Added a nightly test for the Rime collect protocol
2009-02-06 10:13:55 +00:00
fros4943
3c11bf4d8c
start each log file with its filename
2009-02-04 17:58:17 +00:00
fros4943
520ad77046
sky checkpointing test:
...
Tests node local checkpointing on the Sky platform. A single node checkpoints and rollbacks with a repeating echo background process. Running examples/sky-shell/sky-shell.c
2009-02-04 17:53:16 +00:00
fros4943
67f41c8e5c
re-enabled radio channels on sky motes
2009-02-03 14:34:47 +00:00
joxe
4879e83403
minor TOS serial fix
2009-02-03 14:18:12 +00:00
joxe
cf197a3496
fixed TOS detect on usart output
2009-02-03 14:08:24 +00:00
fros4943
04738e219d
bugfix: setting heap start to enable stack watch again
2009-01-23 15:32:24 +00:00
fros4943
fe4cc83441
removed button debug output
2009-01-21 14:31:12 +00:00
fros4943
e194514cb3
printing contiki version and address at startup, similar to other Contiki platforms such as the sky
2009-01-21 12:18:10 +00:00
fros4943
49e0822d28
increased timeout time to 90sec
2009-01-15 13:56:16 +00:00
fros4943
f0111ac181
increased buffer size for maximum sized packets including preamble
2009-01-15 13:55:20 +00:00
fros4943
57584c7af6
added wget contiki test
2009-01-15 13:20:18 +00:00
fros4943
2d8667cad1
added simple method for wrapping serial data in SLIP packets
2009-01-15 13:13:47 +00:00
fros4943
98d23c3494
added help method for writing to script mote serial ports
2009-01-15 13:11:56 +00:00
fros4943
424985c5f8
added generate_message macro to contiki scripts
2009-01-12 10:45:40 +00:00
fros4943
30e6d4943a
changed compilation debug messages
2009-01-12 10:44:36 +00:00
fros4943
6c66d36d62
increased timeout + added some more test output
2009-01-08 18:01:36 +00:00
fros4943
54b7875295
minor fix: using yield and wait_until macro to implement yield_wait_until
2009-01-08 17:47:37 +00:00
fros4943
f296df8bca
fixed typo
2009-01-08 17:46:25 +00:00
fros4943
268df2cadf
bugfix in test: script must yield to avoid infinitely looping at receive messages
2009-01-08 17:34:49 +00:00
fros4943
000fd29f4c
updated threaded contiki test scripts
2009-01-08 17:11:06 +00:00
fros4943
17fa4513dc
updated threaded contiki test scripts
2009-01-08 16:55:53 +00:00
fros4943
b2a1dd2156
updated threaded contiki test scripts
2009-01-08 16:41:48 +00:00
fros4943
94f0d8ca02
implemented contiki test scripts as threads instead of state machines for easier test development
2009-01-08 16:33:14 +00:00
fros4943
fd432fa22c
implemented contiki test scripts as threads instead of state machines for easier test development:
...
new example script + minor fixes
2009-01-08 16:31:43 +00:00
fros4943
2088451994
implemented contiki test scripts as threads instead of state machines for easier test development:
...
javascript generator that replaces test script specific "macros"
2009-01-08 16:27:48 +00:00
fros4943
4af3e29af8
better project load failure notification
2009-01-08 15:43:49 +00:00
fros4943
0f0aab0005
added support for removing events from queue outside simulation thread
2009-01-08 15:42:25 +00:00
fros4943
e9fa905ff1
minor bugfix: use isVisualized() method to determine if Cooja is visualized
2008-12-19 12:48:09 +00:00
fros4943
9e689d4b54
RUN_ALL assumes default Contiki search path
2008-12-17 13:14:46 +00:00
fros4943
e3d3634249
merged script runner plugins:
...
* in GUI-mode the script is editable
* without GUI, the script loads the simulation and activates the test script
2008-12-17 13:12:07 +00:00
fros4943
67d2761fcc
gateway plugin does not extend visplugin; it can be used when cooja is not visualized (such as during tests)
2008-12-17 12:15:43 +00:00
fros4943
1a2794d961
visplugins are optional, but require cooja to be visualized:
...
* hybrid plugins (used both when cooja is visualized and in test mode) should not extend VisPlugin
2008-12-17 11:02:05 +00:00
fros4943
2c344d0754
added cooja support for 64-bit 64-bit architectures:
...
* compiling for PIC
contributed by David Gustafsson and Jesper Karlsson
2008-12-16 16:15:36 +00:00
fros4943
a55f178c7e
implemented getGUI() method
2008-12-16 15:11:18 +00:00
fros4943
4d399119a4
removed dependency on visplugin class, instead referencing plugin visualizers via new plugin method getGUI()
...
+ sanity-check when restoring last cooja location
2008-12-16 15:10:49 +00:00
fros4943
55e5f12503
removing visplugin class dependency
...
* added method for fetching plugin visualizer
2008-12-16 15:07:14 +00:00
fros4943
a5e3a34324
implemented default method for fetching plugin visualizer
2008-12-16 15:05:27 +00:00
fros4943
558244b488
ip ping test for sky platform (telnet server).
2008-12-16 09:51:36 +00:00
fros4943
c36aae56bb
added support for linux:
...
* starting external Contiki process to setup tun interface (instead of JNI solution)
* sending simulation-generated packets to loopback network device (need to activate forwarding and disable rp filter)
2008-12-12 16:27:40 +00:00
nvt-se
747d27ecda
updated cooja/mspsim test for coffee. now with GC
2008-12-12 13:24:42 +00:00
fros4943
c2ef633c87
create lib directory when building
2008-12-09 17:01:42 +00:00
fros4943
e0cc36b02e
removed todo: serial data callback is implemented
2008-12-09 16:58:36 +00:00
fros4943
d45aafc2bb
native IP gateway mote plugin: enables IP communication with simulated networks, such as with ping or telnet
2008-12-09 16:57:57 +00:00
fros4943
c4ba4b7008
thread-safe event scheduling
2008-12-08 13:07:06 +00:00
fros4943
34829fe41e
storing current project directories as meta data in simulation configs.
...
currently no action: only warns if loaded simulation depends on a project not active
2008-12-08 10:26:21 +00:00
fros4943
2e66e36755
added for convenience: reload simulation with new random seed
2008-12-08 09:38:42 +00:00
fros4943
28f299ad87
allow mote tick events to be removed from event queue (slightly faster execution)
2008-12-04 16:52:03 +00:00
joxe
37b40f99c7
changed simulation time from int to long to support very long simulations
2008-12-04 14:03:41 +00:00
fros4943
aae4b54c68
bugfix: mspsim cycle counter was cast to int, limiting maximum simulation time
2008-12-04 13:14:34 +00:00
fros4943
cdd2d9daa5
synchronizing pending bytes vector
2008-12-04 13:09:27 +00:00
fros4943
5e6b02d1b9
ok
2008-12-04 13:08:55 +00:00
fros4943
3893969096
check that simulation is running before joining sim thread
2008-12-04 13:04:26 +00:00
fros4943
dafd174e30
renamed button "Step millisecond"
2008-12-04 12:46:42 +00:00
fros4943
1a7c791a93
reimplemented single tick method
2008-12-04 12:44:02 +00:00
fros4943
609ae94b14
only notify tick observers when simulation time changes, not for every handled event
2008-12-03 16:37:06 +00:00
fros4943
b55b825a60
including test log in test report
2008-12-03 16:25:17 +00:00
fros4943
0083cc2080
using timeout event instead of slower tick observer
2008-12-03 16:23:26 +00:00
fros4943
c6d6bb4a14
removed warning when not starting visualizer plugin in tests
2008-12-03 16:06:33 +00:00
fros4943
7767b03bae
parsing currently used exception for bad memory access by MSPSim
2008-12-03 15:38:01 +00:00
fros4943
d8b0705cb3
mspsim should warn at bad memory access (not activated yet)
2008-12-03 15:36:49 +00:00
fros4943
430333b515
using updated messagelist
2008-12-03 15:18:47 +00:00
fros4943
1117ce1be8
store messages outside model to avoid event thread problems
2008-12-03 15:17:56 +00:00
fros4943
87ebab7113
modified test to fail if any single node successfully delivers 20 sensor data packets, before all other nodes has delivered 5 packets
2008-12-03 14:19:41 +00:00
fros4943
ace83513e8
empty USART stateChanged handler
2008-12-03 13:13:07 +00:00
fros4943
2d7238e775
uIP IP address interface (reading from uip_hostaddr)
2008-12-03 13:11:20 +00:00
fros4943
8c4d5b51f9
using state changed callback for more accurate incoming serial data throughput
2008-12-03 13:04:21 +00:00
nifi
e86b63112a
changed to use MSPSim from tools/mspsim
2008-12-03 09:55:26 +00:00
fros4943
9bde9cedae
updated test script for new sky serial output format (without new line)
2008-11-27 09:00:57 +00:00
fros4943
4a546a3529
automatically stop simulation when script finishes test
2008-11-27 08:51:35 +00:00
nifi
9d36fb106e
added command line history
2008-11-26 16:23:43 +00:00
fros4943
3b8f6af71c
use system look and feel instead of cross platform if nimbus fails (contributed by David Gustafsson)
2008-11-21 13:09:53 +00:00
fros4943
f9152668e8
Added multithreading test:
...
Single Sky node running examples/multi-threading/multi-threading.c. Waits until both threads have counted up and down 5 times.
2008-11-21 12:02:29 +00:00
fros4943
daec791521
function should return void
2008-11-20 17:04:34 +00:00
fros4943
42c3b0fc19
towards adding support for 64-bit architectures: registering relative memory addresses with contiki instead of fetching absolute addresses to java
2008-11-20 16:34:45 +00:00
fros4943
11fa5a9a6b
towards adding support for 64-bit architectures: registering relative memory addresses with contiki instead of fetching absolute addresses to java
2008-11-20 16:22:28 +00:00
fros4943
62854151d7
more extensive rime abc testing:
...
less than perfect radio environment (95%) + each node receives 30 radio messages each
2008-11-11 15:17:44 +00:00
fros4943
06a8b5d7d6
added Rime reliable unicast test.
...
uses examples/rime/example-runicast.c
2008-11-11 15:00:43 +00:00
fros4943
93b32243d0
bugfix: regexps were too restrictive to correctly parse all Contiki processes
...
thanks to Fetahi Wuhib for pointing this out
2008-11-11 11:47:15 +00:00
fros4943
bcb0efab77
added rime rucb test
2008-11-11 11:30:02 +00:00
fros4943
94b06b4617
added sky shell basic commands test.
2008-11-11 10:35:26 +00:00
fros4943
875be00548
using the new methods for reporting test ok/failed.
2008-11-11 10:07:24 +00:00
nifi
fe1aa4d54c
changed file history to not add same file twice and increase history size to 10 entries
2008-11-10 14:59:03 +00:00
fros4943
ab388c2068
added sky collect test
2008-11-05 19:22:18 +00:00
fros4943
773ebbc866
using new testOK() method
2008-11-05 18:20:30 +00:00
fros4943
c42af73101
same class description as GUI-version
2008-11-05 18:18:16 +00:00
fros4943
8cd7d7c981
updated example script with new testOK() methods + better explanations
2008-11-05 18:17:45 +00:00
fros4943
18bb997761
added testOK and testFailed methods accessible from test scripts
2008-11-05 18:16:56 +00:00
fros4943
c46bb21f5e
compile from separate thread, not edt
2008-11-04 17:37:09 +00:00
fros4943
3320f8cb35
add messages directly, scroll list later
2008-11-04 17:33:42 +00:00
adamdunkels
bd2c039dc6
Test that checks if the Contiki shell compiles and runs on the Tmote Sky
2008-11-04 15:17:31 +00:00
adamdunkels
ce338125d7
'OK (Saves)' button -> 'Save'
2008-11-04 15:01:08 +00:00
fros4943
553b576e98
introduced wrapper class for executing swing code in event dispatcher thread.
...
not used by all parts of the code yet
2008-11-04 14:32:32 +00:00
fros4943
118aa4cd4e
changed default lang to english
2008-11-04 09:27:23 +00:00
fros4943
4a7f8d3075
disabled choice of communication protocols
2008-11-03 18:32:22 +00:00
fros4943
488e5dab37
minor fixes + added experimental debugging function: run until function returns
2008-11-03 18:11:44 +00:00
fros4943
730917f846
remember look and feel background color
2008-11-03 18:10:52 +00:00
fros4943
066085a174
click on breakpoint to open source file
2008-11-03 18:10:34 +00:00
fros4943
6ba2594d50
consistent labelling
2008-11-03 18:10:13 +00:00
fros4943
ac4f2544b8
registering tick events when simulation starts running
2008-11-03 18:09:43 +00:00
fros4943
b14dddcb3d
with target specific extensions (.sky)
2008-11-03 14:40:51 +00:00
fros4943
6095919463
Cooja crosslevel communication test:
...
tests radio communication between emulated nodes (ESB + Sky) and Cooja Contiki nodes
2008-11-03 14:05:30 +00:00
fros4943
2df1f699aa
using target extensions (.sky/.esb) instead of generic .firmware
2008-11-03 13:18:28 +00:00
fros4943
3fa37e21ac
more error checking + compile default choice
2008-11-03 12:45:52 +00:00
fros4943
3c7565dd68
allow radio to flush before feeding with packet data
2008-11-03 12:31:33 +00:00
fros4943
a7a87386b5
misspelled method
2008-11-03 10:33:15 +00:00
fros4943
4a494eebb5
updated mspsim jar
2008-10-29 18:39:00 +00:00
fros4943
8668f69077
using cc2420 packet converter for conversions between cc2420 and cooja
2008-10-29 18:38:26 +00:00
fros4943
6e792ff766
removed old sky packet radio
2008-10-29 18:28:28 +00:00
fros4943
6ae7fc99a1
packet converter with x-mac and crc support
2008-10-29 18:28:16 +00:00
fros4943
d6fff91861
added tostring method
2008-10-29 18:23:04 +00:00
fros4943
fdcfbd0e62
bugfix: source file got lost when reloading msp motes
2008-10-29 16:36:33 +00:00
fros4943
0967158d86
bugfix: initializing contiki array with wrong number
2008-10-29 15:55:46 +00:00
fros4943
a95fb2edbd
storing screen device
2008-10-29 13:31:02 +00:00
fros4943
8b3cc86d36
forcing vertical scrollbar
2008-10-29 11:47:50 +00:00
fros4943
9c0d65ae1c
using new nimbus look and feel by default
2008-10-29 10:39:04 +00:00
fros4943
3523f4a0c8
increased label height
2008-10-29 10:36:58 +00:00
fros4943
eb08babd4c
using time events for following up on ongoing transmissions
2008-10-29 09:13:12 +00:00
fros4943
5d7ed0eab2
using events to write serial data to mote
2008-10-29 08:51:09 +00:00
fros4943
d23978318f
added getDrift method
2008-10-29 08:37:42 +00:00
fros4943
2a2be77707
implemented getDrift method
2008-10-29 08:36:12 +00:00
fros4943
cb790a62e3
scheduling events for persistent IDs instead of polling: more efficient
2008-10-29 08:35:38 +00:00
fros4943
9faae40d7c
new interface format without passive/active
...
+ energy method renamed
2008-10-28 17:02:58 +00:00
fros4943
3ee86789e2
new interface format without passive/active
2008-10-28 17:02:13 +00:00
fros4943
0ccb368fba
checking that mote interface class was actually loaded
2008-10-28 17:01:15 +00:00
fros4943
5d90dcdd11
created build file for experimental gdb mote debugger
2008-10-28 17:00:20 +00:00
fros4943
0d7f5468cb
removed old uAODV code
2008-10-28 16:57:08 +00:00
fros4943
efca8688fd
created visualizer example
2008-10-28 16:56:59 +00:00
fros4943
a1a99673f2
updated example radio medium
2008-10-28 16:36:48 +00:00
fros4943
59ed193e58
updated example plugin
2008-10-28 16:22:35 +00:00
fros4943
9e928313cb
removed old project example directory for adding Contiki processes - obsolete method
2008-10-28 16:18:35 +00:00
fros4943
1d7efba71a
updated example interface
2008-10-28 16:09:52 +00:00
fros4943
ee655cf8c4
using new energy interface
2008-10-28 15:36:25 +00:00
fros4943
6e9e29f758
removed passive mote interface
2008-10-28 15:32:23 +00:00
fros4943
b262d5bfce
minor bug fix: storing observer at correct panel
2008-10-28 15:31:51 +00:00
fros4943
b33c7f49af
removed run until button
2008-10-28 15:31:08 +00:00
fros4943
a0bf017e2f
removed passive/active interfaces notion.
2008-10-28 14:09:25 +00:00
fros4943
e7c064801e
removed passive/active interfaces notion.
...
+ fixed scrollbar
2008-10-28 13:59:35 +00:00
fros4943
bbf88f3723
removed passive/active interfaces notion.
2008-10-28 13:38:55 +00:00
fros4943
4231e5f41a
renamed schedule event method
2008-10-28 13:37:11 +00:00
fros4943
0c34a1f000
removed tick time
2008-10-28 13:36:26 +00:00
fros4943
456ef03dc1
removed tick lists and variable tick times
...
handling tick events in simulation loop: moving towards fully event based (as opposed to tick based)
2008-10-28 13:35:59 +00:00
fros4943
5c2d5940ed
new energy method: collecting total energy consumption from each interface
2008-10-28 13:28:35 +00:00
fros4943
237de606b1
removed tick lists and tick time functionality
2008-10-28 12:58:32 +00:00
fros4943
41a74cd9a9
new energy method, not fully implemented yet
2008-10-28 12:55:20 +00:00
fros4943
bbeed74eda
Cooja event queue. Ported from MSPSim
2008-10-28 12:52:24 +00:00
fros4943
37554001d3
Cooja time event. Ported from MSPSim
2008-10-28 12:51:22 +00:00
fros4943
a45f451dcf
removed passive/active interfaces notion.
...
also, new energy estimation method
2008-10-28 12:50:38 +00:00
fros4943
1de0d38ccb
interface handler support for new interface polling format
2008-10-28 12:40:35 +00:00
fros4943
7e864bd3c7
updated interfaces to new polling format.
2008-10-28 12:30:48 +00:00
fros4943
5650f8ba89
implemented by mote interfaces to determine when they should be polled
2008-10-28 12:09:14 +00:00
fros4943
31e2c88a66
passive/active interfaces distinction removed.
2008-10-28 12:05:30 +00:00
fros4943
f35eeb575d
rewriting mote interfaces for faster simulation execution.
...
vibration sensor interface
2008-10-28 12:02:35 +00:00
fros4943
db2c5d3a12
rewriting mote interfaces for faster simulation execution.
...
rs232 interface
2008-10-28 11:59:23 +00:00
fros4943
bee9a6d9ac
rewriting mote interfaces for faster simulation execution.
...
radio interface
2008-10-28 11:49:00 +00:00
fros4943
ddcd54d24a
rewriting mote interfaces for faster simulation execution.
...
PIR interface
2008-10-28 11:16:37 +00:00
fros4943
24308b8915
rewriting mote interfaces for faster simulation execution.
...
node id interface
2008-10-28 11:11:52 +00:00
fros4943
86c3ea9bc8
rewriting mote interfaces for faster simulation execution.
...
log interface
2008-10-28 10:28:38 +00:00
fros4943
960f32f3d4
rewriting mote interfaces for faster simulation execution.
...
LEDs interface
2008-10-28 10:21:37 +00:00
fros4943
892ed6f316
rewriting mote interfaces for faster simulation execution.
...
ipv4 interface
2008-10-28 10:12:43 +00:00
fros4943
ae80b1a585
rewriting mote interfaces for faster simulation execution.
...
clock interface
2008-10-28 09:57:48 +00:00
fros4943
f9d2581e06
rewriting mote interfaces for faster simulation execution.
...
cfs interface
2008-10-28 09:53:23 +00:00
fros4943
ed9063719f
rewriting mote interfaces for faster simulation execution.
...
button interface
2008-10-28 09:42:26 +00:00
fros4943
eb7e75c851
rewriting mote interfaces for faster simulation execution.
...
beeper interface
2008-10-28 09:33:00 +00:00
joxe
545eaedee4
updated mspsim with some new bugfixes - but still some problems with CC2420 and LPL
2008-10-27 07:34:41 +00:00
nifi
8134af742c
updated for new Radio API
2008-10-15 09:00:52 +00:00
nifi
69b73246b9
refactored MSPMote setup + added plugin to access MSPSim CLI
2008-10-13 14:50:50 +00:00
joxe
37214513d6
improved cc2420 support
2008-10-09 11:13:00 +00:00
joxe
9646fa0a01
fixed new byte based radio model for MSPSim based Sky node
2008-10-09 11:11:30 +00:00
joxe
626638d8b8
bugfix for the TinyOS node id support
2008-10-09 09:41:27 +00:00
fros4943
6011abbb79
removed unused currentSimTime + fixed bug when nodes are added during simulations
2008-10-07 16:49:21 +00:00
fros4943
11a084f8df
mspsim with fifop bugfix (setting fifop false when radio is reconfigured)
2008-10-07 15:01:46 +00:00
fros4943
526a5ae497
new mspsim jar with some cc2420 fixes
2008-10-07 11:53:40 +00:00
fros4943
3bae1a2b59
persistent node ID defaults to true
...
+ removed some debugging output
2008-10-07 08:21:05 +00:00
fros4943
e473939ebf
support for node IDs in variables node_id, TOS_NODE_ID or none
2008-10-07 08:18:54 +00:00
fros4943
b8d8474668
mspsim 0.94
2008-10-06 14:03:52 +00:00
fros4943
87cdcfc4da
using Contiki's regular hello-world application in test (examples/hello-world), instead of Cooja's test application
2008-10-05 17:11:54 +00:00
fros4943
3f5daef8bc
compiler should not replace printfs with puts
2008-10-05 15:50:20 +00:00
fros4943
3a26f02fb2
removing debug output
2008-10-05 15:49:10 +00:00
fros4943
74dcd17875
print compilation error stream if not visualized
2008-10-03 15:43:44 +00:00
fros4943
2a2b764ee6
updated some references to old getLastLogMessages()
2008-10-03 15:18:48 +00:00
fros4943
66e361058a
fix: local firmware file variable defined when compilation starts
2008-10-03 15:08:17 +00:00
fros4943
43d97043a7
added clean option
2008-10-03 15:02:21 +00:00
fros4943
e26d2b596f
if newly started plugin has not specified a location/size, use defaults
2008-10-03 14:31:32 +00:00
fros4943
4f5ff657d4
set default location and size
2008-10-03 14:30:51 +00:00
fros4943
4db4a211bf
disabled some (almost) never used configuration options.
2008-10-03 13:54:27 +00:00
