Simon Duquennoy
78f04fda83
Added example of TSCH used with Rime
2016-06-10 20:58:57 +02:00
Antonio Lignan
092f0e62fe
Added generic relay driver for the zoul-based platforms
2016-06-09 15:53:25 +02:00
Simon Duquennoy
b32b3f6666
RPL non-storing: add compile-test to also check for warnings
2016-06-08 14:03:22 +02:00
Simon Duquennoy
1a7133bbf2
Simplified configuration of RPL non-storing mode
2016-06-08 14:03:21 +02:00
Simon Duquennoy
2fe2a28439
Make some of the rpl examples configurable in non-storing mode
2016-06-08 14:03:10 +02:00
Antonio Lignan
ee0b02c819
Merge pull request #1684 from g-oikonomou/contrib/cc26xx/aux-ctrl-and-adc
...
Add CC13xx/CC26xx AUX controller module, ADC support, ALS driver and example
2016-06-07 14:36:28 +02:00
Antonio Lignan
b3faefe602
Merge pull request #1433 from mdlemay/x86-mm
...
X86 memory management
2016-06-05 13:49:49 +02:00
Simon Duquennoy
6c946319d9
Merge pull request #1667 from alignan/pull/at-driver
...
AT driver (master) and example
2016-06-04 22:47:24 +02:00
Simon Duquennoy
64679642f2
Saving ROM and RAM
2016-06-03 16:44:06 +02:00
Simon Duquennoy
5097842cba
Merge pull request #1688 from tsparber/fix-rssi-scanner
...
Fixed rssi-scanner example
2016-06-03 10:12:02 +02:00
Simon Duquennoy
3c9593f3ab
Merge pull request #1692 from pablocorbalan/unicast-sent-cb
...
RIME: Extend unicast example to include a sent callback.
2016-06-03 10:10:36 +02:00
Simon Duquennoy
26bf33c762
Merge pull request #1550 from thomas-ha/tsch-cc2538-port
...
Port of TSCH for CC2538
2016-06-02 21:33:55 +02:00
Antonio Lignan
acf13a4e0d
Merge pull request #1606 from OpenMote/master
...
Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API.
2016-06-01 23:15:27 +02:00
Antonio Lignan
9e1c378919
Merge pull request #1469 from wbober/nrf52dk-pr
...
Add support for nRF52 DK platform
2016-06-01 23:11:39 +02:00
Pablo Corbalán
101575fbe2
RIME: Extend unicast example to include a sent callback.
...
This PR simply adds a packet sent callback to the unicast connection used in the example. Every time a packet is sent the callback is called and prints the linkaddr_t dest, the MAC status of the message sent, and the link layer number of transmissions of the packet. This can be used to compute link quality estimations.
2016-06-01 00:35:49 +01:00
Benoît Thébaudeau
5b3432547e
cfs-coffee: examples: Add support for CC2538
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-01 00:19:52 +02:00
Benoît Thébaudeau
6df2b91a31
test-coffee: Fix the garbage collection test
...
This test could sometimes fail because of a lack of free contiguous
pages in the file system. Fix this by removing the created files at the
end of each test. Besides, the test files do not have to be removed at
the beginning of each test since the file system is initially formatted.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
003b4b0d63
test-coffee: Fix the file modification test
...
The r variable was used instead of i to fill the buffer, resulting in
the end of the test loop after only a single iteration. The file was not
even closed at the end of each iteration although it is opened at the
beginning of each iteration, so the available file descriptors would
very quickly be exhausted.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
150b9fbd8b
test-coffee: Fix test filenames
...
The filenames were mixed up between some of the tests, thus breaking the
purpose of these tests.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
76429e4f0e
test-coffee: Fix numbering of test failure cases
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
5d227b92a3
test-cfs: Fix possible test failure after reboot
...
Remove the file at the beginning of the test, before opening it for
writing, in order to start the test with an empty file system, not only
after flashing the test, but also following every reboot.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:12 +02:00
Antonio Lignan
e23c175699
cfs-coffee: examples: Fix coding style
2016-05-30 23:05:12 +02:00
Antonio Lignan
4ed5c50a4e
Make CFS and Coffee examples platform-independent
...
Move the CFS and Coffee examples from sky to a common cfs-coffee folder
in order to have unified examples for multiple platforms.
2016-05-30 23:05:12 +02:00
Antonio Lignan
334e38339e
Fixed rssi-scanner example
2016-05-30 10:53:20 +02:00
George Oikonomou
5a39df1439
Demonstrate ALS support in the CC26xx demo
2016-05-29 15:05:13 +01:00
Harald Pichler
dfd8fdec4a
initial upload
2016-05-20 11:18:19 +02:00
Harald Pichler
9a2494583d
bugfix compile error tostrf
2016-05-20 09:11:11 +02:00
harald42
abc5db04b2
bugfix start i2c and printf
2016-05-18 08:17:47 +02:00
harald42
a95b0c9d46
add BH1750 sensor example
2016-05-17 16:43:11 +02:00
George Oikonomou
c5bea81bb6
Merge pull request #1530 from herjulf/avr-rss2
...
Adding AtMegaXXRFR2 support and avr-rss2 platform
2016-05-15 20:38:50 +01:00
Antonio Lignan
2b30370b42
AT driver (master) and example
2016-05-15 12:19:04 +02:00
Robert Olsson
d331d39e93
Correct paths when moving examples for regession tests
2016-05-14 22:48:09 +02:00
Robert Olsson
3c19e870f1
Moving the avr-rss2 platform examples to the global examples
...
location as suggested by the maintainers.
2016-05-14 12:05:19 +02:00
Thomas
4870f9e8f3
Fix for IPv6 compilation and linkage errors
...
Two errors have been spotted, when IPv6 is enabled in the ravenusb
Project-Makefile:
#CONTIKI_NO_NET=1
CONTIKI_WITH_IPV6=1
The compile error results from a variable name mismatch in cdc_task.c
The variable 'r' is undeclared and should be renamed to 'route'
The linker also fails with 'undefined references'
This has been mediated by adding 'core/net' to Modules in the
Project-Makefile.
2016-05-09 18:18:28 +02:00
Antonio Lignan
bea58c15bd
Merge pull request #1485 from g-oikonomou/contrib/cc2650/launchpad
...
Add support for the CC2650 LaunchPad (LAUNCHXL-CC2650)
2016-04-29 11:13:05 +02:00
Antonio Lignan
a70b9bc277
Merge pull request #1447 from alignan/pull/cc1200-sensniff
...
Added sensniff support for the CC1200
2016-04-27 23:59:45 +02:00
Pere Tuset
70d94133ea
Updated OpenMote example and platform.
2016-04-25 01:50:23 +02:00
Harald Pichler
944f1b06d6
add led resource
2016-04-24 17:45:35 +02:00
Ralf Schlatterbeck
04bbba6c12
Multi-platform support, osd-merkur-{128,256}
...
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is
now osd-merkur-128. Also check that everything is consistent.
Add both platforms to the regression tests.
Move redundant files in platform dev directory of both platforms to
cpu/avr/dev. Note that this probably needs some rework. Already
discovered some inconsistency in io definitions of both devices in the
avr/io.h includes. Added a workaround in the obvious cases.
The platform makefiles now set correct parameters for bootloader and for
reading mac-address from flash memory.
Factor the flash programming into cpu/avr and platform/osd-merkur* and
rework *all* osd example makefiles to use the new settings. Also update
all the flash.sh and run.sh to use the new settings.
The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:59:40 +02:00
Michael LeMay
73774def6b
x86, galileo: Add sample non-driver protection domain
...
This patch adds a simple non-driver protection domain sample to serve
as an example for defining other non-driver protection domains. It
simply performs a ping-pong test of protection domain switching
latency during boot, including optional accesses to a private metadata
region, and prints out the results.
2016-04-22 08:16:43 -07:00
Nicolas Tsiftes
fb5f0f66dd
Removed Deluge and associated test files.
2016-04-21 13:24:16 +02:00
Nicolas Tsiftes
be13fc7d23
Merge pull request #1605 from tonnenpinguin/pr_fix_slip_config
...
Add typecast to native border router switch statement
2016-04-20 12:51:43 +02:00
Bernhard Hackl
2ad3d85d41
Fix slip config switch statement
2016-04-20 08:14:08 +00:00
Pere Tuset
d9f4d97a41
Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API.
2016-04-19 22:41:40 +02:00
Simon Duquennoy
d828557563
Merge pull request #1425 from kkrentz/llsec-fixes
...
random LLSEC fixes
2016-04-19 17:29:00 +02:00
George Oikonomou
040bada378
Merge pull request #1590 from OpenMote/master
...
Add OpenMote-CC2538 platform and examples.
2016-04-18 21:26:15 +01:00
Pere Tuset
3e00ea55d1
Updated the OpenMote-CC2538 platform and examples.
2016-04-18 16:48:48 +02:00
kkrentz
4a88e9e537
llsec: Removed TSCH_SECURITY_CONF_LEVEL and TSCH_SECURITY_LEVEL
2016-04-13 09:16:08 -07:00
kkrentz
10d8b05bc6
llsec: Permit dynamic security levels
2016-04-13 07:54:46 -07:00
harald42
9a3c6adf8d
add mcu_sleep routines
2016-04-12 10:34:40 +02:00
Antonio Lignan
8f064511d3
Merge pull request #1213 from joakimeriksson/dao_ack_handling
...
End-to-End DAO and DAO ACK handling for Contiki RPL.
2016-04-11 18:53:43 +02:00
Pere Tuset
1d3c37d6da
Add OpenMote-CC2538 platform and examples.
2016-04-11 12:35:02 +02:00
thomas-ha
a7b43de535
add comment, use spaces
2016-04-06 16:54:45 +02:00
Ralf Schlatterbeck
743245e230
Add 'x' prefix to time functions
...
.. to avoid name-clashes with (some) libraries. This now also should
make it work for the 'native' target (untested).
2016-03-29 17:48:59 +02:00
Oliver Schmidt
b287351d99
Activated CBM PFS for the C64 Telnet server.
...
Now that the CBM PFS supports file removal (and a file seek stub) it is possible to have the Telnet server leverage the IDE64 support of the CBM PFS.
Note: Using the CBM PFS for the Telnet server does _not_ reduce the code size since the POSIX I/O functions are additionally still linked in because the POSIX directory functions internally use the POSIX I/O functions. And that's the very reason why the CBM PFS is _not_ activated for the C128 Telnet server: The CBM PFS for the C128 doesn't bring IDE64 support but is supposed to be used to reduce code size - but this isn't possible for the Telnet server.
2016-03-28 19:43:51 +02:00
Joakim Eriksson
12ac02650b
fixed a bug in nbr policy and DAO retransmission handling and added new wismote simulation
2016-03-26 09:45:39 +01:00
Joakim Eriksson
ee97dc4bcd
tuned configuration for rpl-collect and micaz platform
2016-03-26 09:45:39 +01:00
Joakim Eriksson
1d92359e72
Replaced MRHof with OF-0 for getting code-size down for er-example
2016-03-26 09:45:37 +01:00
Joakim Eriksson
60dc6503e5
disabled DAO ACK and configured for only one DAG per instance to save memory for er-example
2016-03-26 09:45:37 +01:00
Joakim Eriksson
f4255fad0f
updated rpl-udp example with scalability test
2016-03-26 09:45:36 +01:00
thomas-ha
199b1b5316
remove define for SFD interrupt
...
not needed anymore when using MAC timer
2016-03-23 09:10:19 +01:00
Michael LeMay
3908253038
x86: Add support for (paging-based) protection domains
...
This patch implements a simple, lightweight form of protection domains
using a pluggable framework. Currently, the following plugin is
available:
- Flat memory model with paging.
The overall goal of a protection domain implementation within this
framework is to define a set of resources that should be accessible to
each protection domain and to prevent that protection domain from
accessing other resources. The details of each implementation of
protection domains may differ substantially, but they should all be
guided by the principle of least privilege. However, that idealized
principle is balanced against the practical objectives of limiting the
number of relatively time-consuming context switches and minimizing
changes to existing code.
For additional information, please refer to cpu/x86/mm/README.md.
This patch also causes the C compiler to be used as the default linker
and assembler.
2016-03-21 17:18:06 -07:00
Michael LeMay
e0d124c7c5
galileo: Add example to print out IMR information
...
This patch adds an example program to print out information about the
configuration of the Intel Quark X1000 SoC Isolated Memory Regions
(IMRs), the Host System Management Mode Controls register, and the
Host Memory I/O Boundary register.
2016-03-17 08:35:49 -07:00
Nicolas Tsiftes
9ab327090c
Merge pull request #1444 from mdlemay/galileo-always-init-gpio
...
galileo: Enable I2C and GPIO interrupt sharing and centralize their initialization
2016-03-14 20:09:40 +01:00
Nicolas Tsiftes
862e43d9b0
Merge pull request #1523 from Zolertia/pull/z1-apify-sensors
...
Adapt Z1 on-board sensors to Contiki's API
2016-03-14 17:10:46 +01:00
Simon Duquennoy
88a0db6aee
Add missing includes
2016-03-14 14:52:59 +01:00
Simon Duquennoy
4bf868fd99
Fix a number of leftover mentions of aaaa as a prefix (now fd00)
2016-03-14 13:56:00 +01:00
Simon Duquennoy
cd981b23d5
Merge pull request #1297 from simonduq/pr/default-prefix
...
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-13 20:39:16 +01:00
thomas-ha
45c7477650
original node.c
2016-03-11 11:02:43 +01:00
thomas-ha
57a47bb12f
node_id on cc2538dk
2016-03-10 18:36:47 +01:00
thomas-ha
a4ccce8dac
enable 32 kHz crystal oscillator for TSCH
2016-03-08 15:54:03 +01:00
thomas-ha
b32ad0dbbd
define for SFD timestamp on cc2538
2016-03-07 18:37:03 +01:00
Simon Duquennoy
dea04c67d7
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-07 17:47:44 +01:00
Simon Duquennoy
8b63b41b96
TSCH-security: disable TSCH logs to save ROM, relax checks in 21-z1-rpl-tsch-security.csc accordingly
2016-03-07 17:43:25 +01:00
harald42
682df76b79
add cputem to common resources and example
2016-03-03 10:32:38 +01:00
Joakim Nohlgård
1219790312
examples/er-rest-example/resources/res-event.c: fix warning: function declaration isn't a prototype
2016-03-02 07:25:19 +01:00
Harald Pichler
5a5ed6b990
cleanup code
2016-02-27 22:16:02 +01:00
Harald Pichler
6bdae7d9ec
cleanup code
2016-02-27 22:14:56 +01:00
Harald Pichler
de928cd14e
cleanup code
2016-02-27 22:10:53 +01:00
Ralf Schlatterbeck
6b40e88ecb
Add cron functionality
2016-02-26 17:30:16 +01:00
Ralf Schlatterbeck
c6165a3bcf
Refactor GENERIC_RESOURCE macro
...
Now callback functions get the URI of the request, this allows to use a
single resource for multiple different URIs.
The is_json flag is now gone for the to-string function, instead the
macro has an is_str flag. If set this automagically produces quotes
around the string for json output.
Now from-string functions can return an error-code, 0 for success, -1
for error.
2016-02-26 17:13:48 +01:00
harald42
c7daa7c45d
add linux documentaion
2016-02-25 13:58:07 +01:00
harald42
2df628aa4b
bugfix native boarder router
2016-02-25 13:37:08 +01:00
harald42
9bb1f01905
update to new version
2016-02-25 13:25:24 +01:00
harald42
b462052bf5
CRLF will be replaced by LF
2016-02-25 08:20:41 +01:00
harald42
98e4451518
Merge branch 'contiki' into osd
2016-02-25 08:18:55 +01:00
harald42
e7f270cf37
crf replace by lf
2016-02-25 08:11:05 +01:00
harald42
a7b230a0b7
bugfix get macaddress
2016-02-24 08:29:24 +01:00
Harald Pichler
855bc65b8a
initial upload
2016-02-23 20:32:53 +01:00
Harald Pichler
1e5163cbb3
bugfix remove testcode
2016-02-23 20:31:10 +01:00
Aitor Mejias
56aeb7cd7e
Added Zolertia Zonik sound sensor test and drivers
2016-02-22 16:49:35 +01:00
Antonio Lignan
934cdbacca
Adapted the ADXL345 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
Antonio Lignan
1be30d52dc
Removed unused blocks and made functions static
2016-02-22 12:08:56 +01:00
Antonio Lignan
151f532225
Adapted the TMP102 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
Ralf Schlatterbeck
de6477efa8
Fix run.sh scripts to use jumptable of bootloader
...
Otherwise a crash results with a bootloader compiled with a newer AVR
toolchain (e.g. Debian Jessie). If you still have an ages-old bootloader
without a jump-table, as a short-term measure you can revert this change
in your run.sh. As a long-term fix we recommend you get your bootloader
updated!
2016-02-19 17:32:09 +01:00
Ralf Schlatterbeck
0068611b4d
Implement localtime
...
Now we manage a timezone and daylight-savings aware version of
localtime. We parse UNIX timezone strings. The default (active after the
first call to localtime or localtime_r) is CET/CEST, the timezone of
Europe/Vienna. The wallclock-time osd-example demonstrates how to set a
different timezone via the timezone resource.
Note: After startup no timezone is set. So in this state querying the
timezone resource will return an empty string. After first call to
localtime (if not timezone has been set via the timezone resource) a
query to timezone will return the default timezone string for CET/CEST.
The string returned by the localtime and utc timezones now also includes
the timezone name.
New fields tm_gmtoff and tm_zone were added to the tm structure. These
are available in BSD systems and when setting special compiler
definitions on Linux.
Note: the timezone offset information in the tm structure (tm_gmtoff)
as well as in the tz structure returned by gettimeofday (tz_minuteswest)
may be wrong sign, this code is largely untested.
2016-02-18 09:55:07 +01:00
Michael LeMay
1f445172ff
galileo: Fix build help message in examples
...
This patch fixes examples/galileo/Makefile so that it actually
displays the intended help message when an unrecognized EXAMPLE is
selected.
2016-02-16 21:19:44 -08:00
Michael LeMay
b82d92e373
galileo: Add I2C callbacks example
...
This patch adds an example for I2C callbacks that is very similar to
the i2c-LSM9DS0 example except that it uses a PWM device that is built
into the platform.
2016-02-16 21:19:44 -08:00
Michael LeMay
58874ea25d
x86, galileo: Refactor I2C and GPIO initialization
...
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.
This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration. Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
2016-02-16 21:19:44 -08:00
Michael LeMay
3e64447631
galileo: Expand README for examples
...
This patch expands the instructions in examples/galileo/README.md.
2016-02-16 21:19:44 -08:00
Michael LeMay
c9bffe6d5a
galileo: Convert README for examples into README.md
...
This patch renames and reformats examples/galileo/README to use
Markdown.
2016-02-16 21:19:44 -08:00
Antonio Lignan
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
Wojciech Bober
38481c513d
nrf52dk: added examples
2016-02-15 09:37:38 +01:00
Antonio Lignan
c6ded00dc4
Merge pull request #1512 from alignan/pull/fix-z1-websense
...
Fix z1-websense example
2016-02-13 16:35:50 +01:00
Antonio Lignan
b2b573e9e7
Fix z1-websense example
2016-02-12 19:10:02 +01:00
Benoît Thébaudeau
287092db42
Merge pull request #1486 from alignan/pull/cc2538-common
...
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 23:48:35 +01:00
Antonio Lignan
45c125949a
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 17:26:11 +01:00
Simon Duquennoy
658cf0d2cc
Reworking jn516x default configuration and examples
2016-02-03 10:35:48 +01:00
Simon Duquennoy
15a5f27080
Adding TSCH to examples/jn516x/rpl
2016-02-01 13:38:53 +01:00
Harald Pichler
b8c5ee0e2b
add Test code
2016-01-28 17:08:56 +01:00
George Oikonomou
61e619dfcd
Extend the CC26xx web demo to support the LaunchPad
2016-01-28 11:23:20 +00:00
George Oikonomou
54f0a2ecbd
Extend the CC26xx demo to support the LaunchPad
2016-01-28 11:23:20 +00:00
Toni Lozano
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
Harald Pichler
c09625704c
add exponential
2016-01-25 22:39:52 +01:00
Harald Pichler
f2fe41017b
add linear lookup
2016-01-25 20:48:30 +01:00
Harald Pichler
681c514a18
add coap resourcen rgb
2016-01-25 20:41:26 +01:00
Toni Lozano
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00
Harald Pichler
535194bcb4
add lookup table
2016-01-24 21:30:35 +01:00
Harald Pichler
44d4f855c6
add contiki combatibility
2016-01-24 16:04:37 +01:00
Harald Pichler
406d69a27c
add RGBdriver
2016-01-23 17:49:51 +01:00
Antonio Lignan
246b01095f
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-23 15:52:29 +01:00
Harald Pichler
6fcdf21552
Merge branch 'osd' of https://github.com/osdomotics/osd-contiki into osd
2016-01-22 21:48:24 +01:00
Harald Pichler
c381f81f57
add experimental code netstack
2016-01-22 21:46:35 +01:00
Antonio Lignan
9a80c0098f
Added zero-calibration function and added offset values to the structure
2016-01-22 16:58:46 +01:00
Antonio Lignan
426fa24e50
Clear interrupt and trigger callback if new data is generated
2016-01-22 16:58:46 +01:00
Antonio Lignan
f5b52e8094
Ported Grove's 3-axis gyroscope sensor (based on ITG-3200)
2016-01-22 16:58:46 +01:00
Antonio Lignan
6351462e89
Unified BMP180 and BMP085 drivers
2016-01-22 16:11:49 +01:00
root
e60fe15812
Merge branch 'osd' of https://github.com/osdomotics/osd-contiki into osd
2016-01-22 15:44:44 +01:00
Harald Pichler
fce1b561da
initial upload
2016-01-22 15:41:55 +01:00
Antonio Lignan
ec45369d1b
Merge pull request #1466 from alignan/pull/weather-meter
...
Add driver for the Sparkfun Weather meter station
2016-01-22 15:18:14 +01:00
Fredrik Österlind
9bdb1f1794
Merge pull request #1462 from MichaelKlemm/FixCoojaPluginLoad
...
Fixed loading SerialSocketServer plugin in Cooja using FQDN
2016-01-21 09:39:40 +01:00
Antonio Lignan
a6c30b4e09
Fixed missing static keyword in both zoul-demo and weather meter driver
2016-01-19 22:24:53 +01:00
Antonio Lignan
366f11d5df
Uncrustified weather meter driver and example
2016-01-19 18:03:16 +01:00
Antonio Lignan
81bec49a40
Changed fixed 2 minute integration period to allow overriding
2016-01-19 18:00:18 +01:00
Antonio Lignan
0902e0fc6d
Added degree converted value for the wind vane sensor.
...
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
2016-01-19 17:47:46 +01:00
Antonio Lignan
61f1516369
Reworked instant wind speed calculation and extended the available wind speed return values
2016-01-19 17:47:46 +01:00
Antonio Lignan
aacbcd904f
Added interrupt configuration for the weather meter
2016-01-19 17:47:46 +01:00
Antonio Lignan
103911f619
Added driver for the Sparkfun's weather meter station
2016-01-19 17:47:46 +01:00
harald
0c3eeed1bf
add leds
2016-01-19 14:01:28 +01:00
Antonio Lignan
2295ecdbd9
Renamed adc-sensors/adc-wrapper to adc-zoul/adc-sensors, to have a better wording reflecting the intented use
2016-01-17 23:04:34 +01:00
Antonio Lignan
503abb4415
ADC wrapper for the Zoul-based platforms, allows to add analogue sensors over the existing adc interface
2016-01-17 22:40:06 +01:00
Antonio Lignan
ac07e848b7
Minor fixes to file descriptions and disable DEBUG switches
2016-01-17 21:52:34 +01:00
Simon Duquennoy
c792f5cf4b
Merge pull request #1409 from nfi/oma-lwm2m-ipso
...
Implementation of OMA LWM2M Engine / IPSO Objects
2016-01-17 10:20:33 +01:00
Michael Klemm
c03b05c702
Fixed loading SerialSocketServer plugin in Cooja using FQDN
2016-01-16 12:25:42 +01:00
Harald Pichler
c2f9c584b9
at init set buzzer to low,at adc vonversion stop shedular dutycycle
2016-01-15 15:56:55 +01:00
Antonio Lignan
99f0c9f19b
Merge pull request #1457 from alignan/pull/motion-sensor
...
Add support for digital motion/presence sensors
2016-01-11 20:30:09 +01:00
Antonio Lignan
57f4134c9e
Merge pull request #1454 from alignan/pull/sht25-sensor
...
Fixes and enhancements for the SHT25 sensor
2016-01-11 20:29:14 +01:00
Antonio Lignan
94657b7a72
Merge pull request #1449 from alignan/pull/bmp085-sensor
...
BMP085 barometric sensor for the RE-Mote platform
2016-01-11 20:28:35 +01:00
Antonio Lignan
c644a32dc7
Added support for digital presence/motion sensors
2016-01-11 18:36:31 +01:00
George Oikonomou
c394302c44
Merge pull request #1446 from alignan/pull/tsl2563-sensor
...
Enhanced TSL2563 driver for the Zoul module (RE-Mote/Firefly)
2016-01-11 11:21:51 +00:00
Antonio Lignan
48eb2a4fe2
Uncrustify changes
2016-01-10 23:36:00 +01:00
Antonio Lignan
d53a62187d
Added extra features of the SHT25 sensor
2016-01-10 23:33:33 +01:00
George Oikonomou
fa40d2b1fc
Remove documentation references to the Sensinode platform
...
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:09:31 +00:00
George Oikonomou
707353f71b
Remove Sensinode platform, cpu, example and tools files
...
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:01:58 +00:00
Antonio Lignan
7b953091e5
Added BMP085 barometric sensor for the Zoul platform
2016-01-10 04:17:26 +01:00
Antonio Lignan
7abee394cb
Initialized interrupt thresholds and added missing check
2016-01-10 04:09:07 +01:00
Benoît Thébaudeau
ada5c6193e
cc2538dk: pka: Fix missing Makefile.target
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:20 +01:00
Benoît Thébaudeau
f78a132395
cc2538: pka: Fix include paths breakage
...
The PKA drivers and examples were full of include paths missing the
appropriate prefix, or using angle brackets instead of double quotes or
the other way around.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:13 +01:00
Antonio Lignan
a8a1ebf8b5
Added interruption feature to the TSL2563 driver
2016-01-08 15:14:37 +01:00
Antonio Lignan
8456b8333f
Added sensniff support for the CC1200
2016-01-08 14:45:50 +01:00
Antonio Lignan
881e78cb60
Rewamped TSL2563 light sensor
2016-01-07 12:53:31 +01:00
Benoît Thébaudeau
ccceb63e88
cc2538: Add crypto driver and example for AES-GCM
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:54 +01:00
Benoît Thébaudeau
e77e9861fe
cc2538: Add crypto driver and example for AES-CBC-MAC
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
Benoît Thébaudeau
47c24cab11
cc2538: Add crypto driver and example for AES-CTR
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
Benoît Thébaudeau
cf5e9557f8
cc2538: Add crypto driver and example for AES-CBC
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 22:01:41 +01:00
Harald Pichler
428131e8a8
use dynamic sleep for loop
2016-01-06 21:57:29 +01:00
Harald Pichler
836a483f7e
bugfix dallas coap resource
2016-01-06 21:39:35 +01:00
Simon Duquennoy
14be5aae88
Merge pull request #1423 from TeVeDe/master
...
Add examples for NXP JN516x using TSCH
2016-01-05 15:54:04 +01:00
Theo van Daele
68b2b3dd1c
Add examples for NXP JN516x using TSCH
2016-01-05 10:44:13 +01:00
Benoît Thébaudeau
3dbe4c9403
cc2538: Add crypto driver and example for AES-ECB
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
Benoît Thébaudeau
04890b1899
cc2538: ccm: Allow separate input/output buffers
...
This is supported by the hardware, so give access to this feature in the
API.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
Antonio Lignan
ca919ab0b0
Merge pull request #1196 from otcshare/x86
...
New platform: Intel Galileo Board
2015-12-23 12:33:47 +01:00
Antonio Lignan
36ddb737e1
Refactored the example to broadcast a message to the zoul-demo example
2015-12-22 15:16:55 +01:00
Harald Pichler
d484585e39
bugfix scale
2015-12-22 06:37:40 +01:00
Joakim Eriksson
5da887c35f
added readme for ipso-objects
2015-12-21 14:39:16 +01:00
Ricardo de Almeida Gonzaga
ba09b47d65
galileo: Initialize pinmux in i2c-LSM9DS0 example
...
In order to ensure SCL and SDA are exported in the correct pins.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
77327181e0
galileo: Add GPIO interrupt example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate interrupt pins.
The application uses default galileo pinmux initialization and sets
the GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as interrupt. It toggles
the output pin stat at every half second in order to emulate an interrupt.
This triggers an interrupt and the application callback is called.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
61e06c632a
galileo: Add GPIO input example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate input pins.
The application uses default galileo pinmux initialization and sets the
GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as input. It toggles the
output pin state at every half second and checks the value on input pin.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
7dfd753b21
galileo: Add I2C master example
...
This patch adds an example application that shows how to use I2C driver
APIs to communicate with LSM9DS0 sensor. At every 5 seconds, the
application reads the "Who Am I" register from gyroscope sensor and
prints if the register value matches the expected value.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
cc51f89b31
galileo: Add GPIO output example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate output pins. The application sets the
GPIO 4 pin as output pin and toggles its state at every half second.
2015-12-21 08:06:14 -02:00
Jesus Sanchez-Palencia
b8056b9c97
examples: Add all-timers example
...
This commit adds a very simple example which is useful to verify
that all timers APIs are working. There are 3 protothreads running,
the first process tests etimer, timer and stimer APIs, the second
process tests the ctimer APIs, and the third one tests the rtimer
APIs.
2015-12-21 08:06:14 -02:00
Antonio Lignan
5e14c22c98
Add support for the RE-Mote on-board power management feature
2015-12-18 16:20:30 +01:00
Theo van Daele
654bb913f0
Add examples for NXP JN516x using TSCH
2015-12-17 13:29:42 +01:00
Antonio Lignan
834f965c95
Added support for the RE-Mote on-board Real Time Clock Calendar (RTCC)
2015-12-16 18:43:33 +01:00
Benoît Thébaudeau
4a6e19ed38
cc2538: pwm: Automatically disable PM1+ if running
...
The peripheral core clocks of the PWM timers are gated in PM1+, so these
power modes must be disabled if a PWM timer is running. Use
lpm_register_peripheral() to handle this automatically and dynamically.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-12-13 02:39:55 +01:00
Simon Duquennoy
7eabf8d391
TSCH: latest update from https://github.com/EIT-ICT-RICH/contiki
2015-12-04 15:21:58 +01:00
Simon Duquennoy
f225ff43d3
Added TSCH+RPL example, with support for link-layer security and Orchestra scheduling
2015-12-04 15:21:54 +01:00
Simon Duquennoy
bc17cdca2c
Merge pull request #1408 from simonduq/pr/jn516x-update
...
JN516x: tickless clock, power saving update, 32 kHz rtimer
2015-12-03 14:59:53 +01:00
Simon Duquennoy
bef32c20fb
jn516x examples: print out network state periodically
2015-12-03 13:57:26 +01:00
Oliver Schmidt
7288a364b0
Fixed C&P error.
2015-12-03 09:09:21 +01:00
Oliver Schmidt
922bebc68a
Some targets only return from getchar() on newline.
2015-12-02 18:27:54 +01:00
Oliver Schmidt
48d1d74f1c
Fixed dacef46b03
2015-12-02 18:24:44 +01:00
Niclas Finne
3dd11603a7
Implementation of OMA LWM2M Engine / IPSO Objects
2015-12-02 15:40:05 +01:00
Antonio Lignan
e47b309536
Added note in PWM driver and example about PM0
2015-11-30 09:43:35 +01:00
Harald Pichler
c493bc6618
initial upload
2015-11-29 22:34:24 +01:00
Harald Pichler
ba9d4ed578
add dallas ds1820 external sensor
2015-11-29 22:31:59 +01:00
Harald Pichler
67ed80e9fe
move defines to servo.h
2015-11-28 18:45:15 +01:00
Antonio Lignan
37fcb927be
Added PWM driver for the Zolertia Zoul module and CC2538 platforms
2015-11-25 23:56:29 +01:00
Marco Grella
e47c69c170
Merge remote-tracking branch 'upstream/master' into stm32nucleo-spirit1
2015-11-25 12:36:01 +01:00
Antonio Lignan
830f5fb60d
Fixed warnings in Z1 examples
2015-11-24 22:02:05 +01:00
George Oikonomou
a30154c43e
Fix code style: zoul examples
2015-11-24 21:15:34 +01:00
George Oikonomou
be1bd9a619
Fix code style: Z1 websense example
2015-11-24 21:15:34 +01:00
George Oikonomou
e1f6d39857
Fix code style: Z1 main examples
2015-11-24 21:15:34 +01:00
Antonio Lignan
27fd1a5eb8
Updated RE-Mote revision A support and cleaning up Zolertia platforms
2015-11-24 21:15:33 +01:00
Simon Duquennoy
673d1d103b
JN516x: minor fixes
2015-11-21 10:23:15 +01:00
Harald Pichler
9b9958fb43
initial upload
2015-11-20 14:08:43 +01:00
Marco Grella
41f9ca08e2
Merge with updated master.
2015-11-11 13:42:35 +01:00
Simon Duquennoy
4c52b87ac1
Ported jn516x slip-bridge to new uip_fallback_interface
2015-11-10 09:30:36 +01:00
Simon Duquennoy
dacef46b03
wget.c: replace deprecated gets with safe fgets
2015-11-10 09:09:31 +01:00
Simon Duquennoy
fbd78a7e3b
Merge pull request #1293 from simonduq/pr/fix-warnings
...
Fix a number of compiler warnings and enable -Werror in Travis
2015-11-10 08:49:11 +01:00
Oliver Schmidt
8e9da827c0
Several minor adjustments.
2015-11-03 22:09:24 +01:00
Oliver Schmidt
fb5d0b7ef0
Made 80 column display a cc65 application attribute.
...
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.
I see three types of application:
* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig
* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget
* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser
Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
2015-10-30 12:42:58 +01:00
Marco Grella
e261cda8dc
Compilation flags update: BOARD=ids01a4/5 SENSORBOARD=iks01a1
2015-10-27 12:12:59 +01:00
Rémy Léone
f2440235b5
Fix CSC & XML export to match .gitattributes
2015-10-22 16:05:40 +02:00
Benoît Thébaudeau
bf41de1be5
Merge pull request #1078 from drandreas/cc2538-crypto
...
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-21 11:24:35 +02:00
Simon Duquennoy
2daa3d7377
Merge pull request #1269 from tadodotcom/tmp-uip-fallback-iface
...
More flexibility for the fallback interface
2015-10-20 11:33:14 +02:00
Simon Duquennoy
8f954fbab5
res-b1-sep-b2.c: fix type of iterator
2015-10-20 10:11:50 +02:00
Simon Duquennoy
1634acf2c4
jn516x examples: fix compiler warnings to enable -Wall -Werror compilation
2015-10-20 10:11:46 +02:00
Adam Dunkels
9b6377ecdc
Fix compiler warnings
2015-10-20 10:11:37 +02:00
Adam Dunkels
afe3612c0c
Fix compiler warnings
2015-10-20 10:11:36 +02:00
Simon Duquennoy
e3303c7e99
Added missing undef in examples/cc2528dk/sinffer/project-conf.h
2015-10-20 09:37:10 +02:00
Simon Duquennoy
c8ec08732c
Fix broken printf in examples/er-rest-example/resource/res-b1-sep-b2.c
2015-10-20 09:37:09 +02:00
Simon Duquennoy
9c15d1c42f
Merge pull request #1063 from simonduq/configure-na
...
Default NDP configuration
2015-10-18 20:26:55 +02:00
Simon Duquennoy
10bd49a71a
Merge pull request #756 from sieben/dos2unix
...
dos2unix fix
2015-10-18 20:26:07 +02:00
AntiCat
d631270af4
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-18 20:14:17 +02:00
Konrad Krentz
0a6b1cb646
llsec: Added AEAD mode to CCM*
2015-10-14 08:22:44 -07:00
Konrad Krentz
c656a4d1c5
llsec: Fixed style issues in CCM*
2015-10-14 08:22:44 -07:00
Konrad Krentz
2059b6559e
llsec: Let llsec_drivers define their own framer
2015-10-14 08:21:40 -07:00
Marco Grella
4e81c87c3a
Fix to sensor-demo license and Readme file.
2015-10-13 12:21:21 +02:00
Harald Pichler
fd24ecd26e
add index and struct for messured values
2015-10-11 15:30:30 +02:00
Harald Pichler
e8471445ed
add struct for sensors, add sketch.h
2015-10-11 15:22:49 +02:00
Marco Grella
fc65757114
License headers and code style fixes.
2015-10-09 19:40:39 +02:00
Harald Pichler
0a4938243e
cleanup resources
2015-10-08 21:14:43 +02:00
Harald Pichler
4ff973a0cc
mult. DS18B20 Temp demo
2015-10-07 16:14:00 +02:00
Simon Duquennoy
2231cc9b0f
Merge pull request #1266 from drugo72/avr-revival
...
AVR revival: new battery and temperature sensors and er-rest-example for the Raven
2015-09-28 17:52:26 +02:00
Simon Duquennoy
2834b41ed6
Merge pull request #1267 from drugo72/rest
...
REST: new observable, periodic temperature resource
2015-09-28 17:52:05 +02:00
Mariano Alvira
94daacd244
Merge pull request #817 from SmallLars/econotag-ecc
...
Addet ECC functions on elliptic curve secp256r1.
2015-09-28 09:45:11 -05:00
Simon Duquennoy
f9537b6355
Merge pull request #1219 from simonduq/jn516x-port
...
NXP JN516x Platform
2015-09-25 12:09:52 +02:00
Lars Schmertmann
17ff3bb466
Added ECC functions on elliptic curve secp256r1
2015-09-24 14:11:20 +02:00
Simon Duquennoy
0780e1a051
Added NXP JN516x examples
2015-09-23 14:38:41 +02:00
Víctor Ariño
76e293c289
Fixes ret value for output fallback iface in tun-bridge.c
2015-09-22 12:53:04 +02:00
Víctor Ariño
561e70b18e
Updated current fallback_interface(s) to return int.
2015-09-22 12:53:04 +02:00
Cristiano De Alti
6e91cb3a39
Activate battery and temperature resources
...
if they are supported by the platform.
2015-09-21 23:20:45 +02:00
Cristiano De Alti
ba3c167cef
Add a new periodic temperature resource.
...
The temperature sensor is sampled once per second.
If observed, temperature readings are reported on change or every
Max-Age interval (default: 60s).
2015-09-21 23:12:16 +02:00
Cristiano De Alti
5a829d818d
er-rest-example leveraging the new rave sensors.
2015-09-21 22:53:48 +02:00
Harald Pichler
1a309e6632
bugfix project conf, do not sleep git add project-conf.h
2015-09-21 16:09:28 +02:00
Harald Pichler
a2e70d49f3
remove first space from converted string
2015-09-16 10:31:52 +02:00
Harald Pichler
6b41f23d59
make mcusleep variable, use mcusleepcycle
2015-09-15 09:52:06 +02:00
Lars Schmertmann
46ffc509c1
Added App/Tool/Example for usage of additional flash on econotag/mc1322x
2015-09-14 20:43:12 +02:00
Harald Pichler
7404e75213
bugfix float resources, save energy enabled
2015-09-14 16:55:18 +02:00
Harald Pichler
e3ffbe36c8
bugfix printf and float
2015-09-14 10:51:16 +02:00
Harald Pichler
617d42663c
add htu21d sensor and resources and set mesure inteval to 10 seconds
2015-09-11 21:41:24 +02:00
Ralf Schlatterbeck
7f09f96e88
Fix compile error
...
Wire.h is a C++ include-file and may not be within 'extern "C"'.
2015-09-11 15:10:28 +02:00
Marco Grella
87970a88a4
Comments and documentation fixes.
2015-09-10 14:28:08 +02:00
Marco Grella
b7459a12c1
Added radio sensor.
2015-09-07 19:59:03 +02:00
Rémy Léone
7a5071dd30
Adding a gitattributes and correcting line-endings
...
https://help.github.com/articles/dealing-with-line-endings/
2015-09-07 15:40:02 +02:00
Marco Grella
17aafb9daa
Align to current master
2015-09-04 17:01:04 +02:00
Harald Pichler
910dc981b5
initial upload
2015-09-04 14:04:11 +02:00
Nicolas Tsiftes
607303ecdd
Merge pull request #1081 from pablocorbalan/light
...
Remove old unused light drivers
2015-08-28 14:13:00 +02:00
Adam Dunkels
bfb29d2f11
Merge pull request #1116 from cetic/pr-uip-clear-buffer
...
Add uip_clear_buf() macro and replace all instances of uip_len = 0
2015-08-27 10:27:08 +02:00
Harald Pichler
500078ef9a
update to contiki 3.0
2015-08-26 16:01:57 +02:00
Jonas Olsson
67045d4012
Export RSSI to default parent in the CC26xx web demo
...
The current version of the CC26xx web demo publishes over MQTT the default parent's IPv6 address and the last observed RSSI of this link. This is collected by active probing (periodic ping).
This commit brings the probing functionality to the example's main code module. The MQTT client keeps publishing as previously, but we now also export the same information through CoAP resources. Configuration is still possible through the example's web server.
2015-08-23 20:41:12 +01:00
Jonas Olsson
bad7eb2bc8
Add a very sleepy CC26xx/CC13xx demo
...
This demonstraties how to combine CC13xx tick suppression, RPL leaf mode and turning off ContikiMAC duty cycling to build an extremely low-consuming firmware.
2015-08-23 20:41:12 +01:00
Jonas Olsson
72b586cb7d
Modify cc26xx examples to play nicely with the CC13xx addition
2015-08-23 20:41:11 +01:00
Oliver Schmidt
902b21a326
Merge pull request #1188 from oliverschmidt/master
...
Some finishing touch on the CBM retro targets.
2015-08-08 16:33:59 +02:00
Oliver Schmidt
757809196e
Some finishing touch on the CBM retro targets.
2015-08-08 15:41:24 +02:00
Pablo Corbalán
5db5524b7f
Remove unneeded headers in sky-shell-exec
2015-08-04 20:39:09 +01:00
Joe Andrieu
e0f72b9545
Clarified that a newline is needed for the echo
2015-07-26 16:17:34 -07:00
Marco Grella
86f35536a4
Added new stm32nucleo-spirit1 platform
2015-07-24 16:30:10 +02:00
Oliver Schmidt
a0be26d9f1
Merge pull request #1150 from oliverschmidt/master
...
Several retrocomputing config changes.
2015-07-06 09:42:55 +02:00
Simon Duquennoy
3315d3069d
Merge pull request #1108 from phoenix-frozen/generify-ccm-star
...
generalised CCM module into lib
2015-07-01 10:44:41 +02:00
Oliver Schmidt
00f9eebfab
Changed Telnet server configuration for the Apple II.
...
Having the Telnet server reboot on exit (via ctrl-reset) allows to bring back the full MTU.
2015-06-28 22:25:28 +02:00
Oliver Schmidt
a70fbf1bbf
Reconfigured Telnet server.
...
In order to have the wget command make some sense the write command should be present too.
- On the Apple][ reduction of the MTU seems to gain just enough RAM to have the (rather heavy-weight) full-blown C library file I/O working.
- On the C128 there's way too little RAM so there's no wget command but only the file commands.
- On the CBMs a dummy lseek() was necessary to have the read command link.
2015-06-21 21:07:41 +02:00
Oliver Schmidt
fc9d38caba
Reduced default for number of connections.
...
Save some memory by reducing the the default for number of connections from 10 to 2.
2015-06-21 20:58:51 +02:00
Laurent Deru
1f0fd3f38b
Add uip_ext_len definition in fakeuip.c for ravenusbstick
2015-06-15 15:15:59 +02:00
Laurent Deru
1784338b2e
Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it
2015-06-15 11:10:51 +02:00
Justin King-Lacroix
3ce8f26eea
generalised CCM module into lib
...
introduced convenience functions for LLSEC modules
2015-06-10 18:07:41 +01:00
Benoît Thébaudeau
e8a268cd15
cc2538: aes: Add support for 192- and 256-bit keys
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00
Benoît Thébaudeau
801315e819
cc2538: aes: Make it possible to have several keys stored at once
...
Several keys can be kept at the same time in the key store, and several
keys can be loaded at once. Give access to these features.
The ccm-test example is also improved to better demonstrate the use of
the key store.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau
b92a5afcc4
cc2538: ccm: Make it possible to use the interrupt
...
Using the AES interrupt allows the user process not to waste time
polling for the completion of the operation. This time can be used by
the user process to do something else, or to let the system enter PM0.
Since the system is now free to perform various operations during a
crypto operation, a protection of the crypto resource is added, and PM1+
is prohibited in order not to stall crypto operations.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau
117dc4e5e3
cc2538: Add crypto drivers and examples for AES-CCM and SHA-256
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:06 +02:00
Antonio Lignan
330e450ba4
Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094 ).
...
The port was done jointly by Zolertia and George Oikonomou (University of Bristol).
2015-05-29 22:04:43 +02:00
Harald Pichler
72c6c2c492
bugfix add status led
2015-05-21 22:14:39 +02:00
Harald Pichler
9b6bdd30b8
use all submodules
2015-05-21 21:31:18 +02:00
Antonio Lignan
2cee62eb33
Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware
...
Update to latest CC26xxware and add it as a submodule
2015-05-21 10:01:00 +02:00
Harald Pichler
6a0d407806
Merge branch 'contiki' into osd
2015-05-19 10:54:55 +02:00
Adam Dunkels
730bda2001
Merge pull request #883 from cmorty/pull/global-macros
...
Move MAX, MIN and ABS to contiki-macros
2015-05-18 21:33:00 +02:00
Moritz 'Morty' Strübe
0dab6926b3
Move MAX, MIN and ABS to sys/cc.h
2015-05-18 08:53:17 +02:00
George Oikonomou
5f4154a0e3
Adjust AON BatMon usage
2015-05-17 14:09:51 +01:00
Antonio Lignan
32afadea77
Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm
...
CC26xx Ultra Low Power Operation
2015-05-16 10:27:22 +02:00
Harald Pichler
82d03d0ebf
bugfix no framer
2015-05-15 20:59:59 +02:00
Harald Pichler
877bf27f5a
Merge branch 'contiki' into osd
2015-05-15 20:48:26 +02:00
Antonio Lignan
402eabecca
Merge pull request #929 from lab11/delete-old-coap
...
Delete old CoAP implementation
2015-05-15 15:49:04 +02:00
George Oikonomou
7e00eeb76a
Achieve lowest consumption with the CC26xx demo:
...
This changes the CC26xx simple demo so that a devices running this firmware will achieve the lowest possible energy consumption without requiring any changes to the example
2015-05-15 09:21:05 +01:00
George Oikonomou
421fbfae25
Change the LPM locks API:
...
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.
This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
George Oikonomou
00a6c31158
Improve OPT sensor driver and usage
...
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
Antonio Lignan
b50ae639b3
Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
...
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
Brad Campbell
869768902b
seedeye powerswitch: update coap
...
The powerswitch app was using old an older implementation of er-coap.
This updates it.
2015-05-14 17:20:46 -04:00
Brad Campbell
6eaada0c3f
Delete old CoAP implementation
...
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
2015-05-14 17:20:46 -04:00
Benoît Thébaudeau
d64927397f
Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
...
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
George Oikonomou
e4722bb0ea
Replace SHT21 with HDC1000 in the web demo
2015-05-14 13:20:39 +01:00
George Oikonomou
62f978b993
Replace SHT21 with HDC1000 in the simple demo
2015-05-14 13:20:39 +01:00
George Oikonomou
11a5e0a49a
Merge pull request #1051 from simonduq/fix-warning
...
Fixed a number of compiler warnings
2015-05-13 00:52:40 +01:00
George Oikonomou
49d1782a06
Adjust the MQTT demo to use re-engineered sensors
2015-05-12 23:42:20 +01:00
George Oikonomou
ac459df128
Re-work the CC2538 demo to use the 3 separate ADC sensors
2015-05-12 23:42:20 +01:00
Simon Duquennoy
1ac5d85042
Enable NA in examples that need it
2015-05-10 19:56:38 +02:00
Nicolas Tsiftes
44af0fa66b
Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket
...
New HTTP socket, DNS64, IP64 Cooja tests
2015-05-10 17:14:31 +02:00
Adam Dunkels
bc222ed85c
Code for building an IP64 router
2015-05-10 10:51:11 +02:00
Adam Dunkels
33372945a3
HTTP socket code with support for GET and POST
2015-05-10 10:51:11 +02:00
George Oikonomou
447be526ae
Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br
...
Enable slip-radio and rpl-border-router for CC26xx
2015-05-09 22:51:06 +01:00
George Oikonomou
6e3197b0bf
Merge pull request #1008 from g-oikonomou/cc26xx/contrib/web-demo-httpd
...
Improve HTTPD in the CC26xx web demo
2015-05-09 22:46:26 +01:00
George Oikonomou
bd5e35c968
Merge pull request #1052 from simonduq/packetbuf-cleanup
...
Packetbuf cleanup
2015-05-09 22:30:21 +01:00
George Oikonomou
33526be5ab
Merge pull request #985 from g-oikonomou/cc26xx-minor-updates
...
Minor Updates to the CC26xx Port
2015-05-09 22:29:30 +01:00
George Oikonomou
38b3b8b74a
Merge pull request #981 from g-oikonomou/cc2538-sniffer-fix
...
Turn on the CC2538 RF explicitly in the sniffer example
2015-05-09 21:56:23 +01:00
Simon Duquennoy
4a93f5148d
Fixed a number of compiler warnings
2015-05-08 09:07:20 +02:00
Simon Duquennoy
290fc829ea
Consistently use PACKETBUF_ATTR_MAC_SEQNO for MAC sequence number, both input and output. Disable PACKETBUF_ATTR_PACKET_ID in the non-Rime case.
2015-05-06 16:34:44 +02:00
Simon Duquennoy
bb76bb8beb
Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled.
2015-05-06 16:34:26 +02:00
George Oikonomou
f83c4e7286
Improve code style
2015-05-03 22:36:03 +01:00
Nicolas Tsiftes
f7ca4b41a9
Merge pull request #1001 from adamdunkels/pr/queuebuf-no-ref
...
Cleanup: remove the obsolete reference packetbuf
2015-05-03 16:35:17 +02:00
George Oikonomou
a72d90e283
Control TCP MSS in the project's conf
2015-05-03 13:31:03 +01:00
Harald Pichler
b2847f4756
add coap18
2015-04-29 15:58:42 +02:00
Harald Pichler
b97d6878c0
add coap18
2015-04-28 20:56:52 +02:00
Harald Pichler
a1423c28fc
add coap18
2015-04-28 19:53:43 +02:00
Harald Pichler
12fe0d8442
change to coap18
2015-04-22 14:18:10 +02:00
David Rabel
65c50195c4
ressource handlers for servos corrected
2015-04-03 15:46:05 +02:00
David Rabel
0980393d22
Fix servo example
2015-04-03 14:31:25 +02:00
David Rabel
3ba9009f50
Use servo instead of t4-servo
2015-04-03 14:29:52 +02:00
Adam Dunkels
7acf747c1a
Removed packetbuf references. This was a feature that is not used anymore and only made the code more complex.
2015-04-01 21:33:02 +02:00
Antonio Lignan
b9334a3b0e
Added Reed Sensor driver and example
2015-03-30 10:30:09 +02:00
George Oikonomou
7730215f99
Point all form action attributes to the current html page
2015-03-27 20:18:58 +00:00
George Oikonomou
7637164ae7
Parse filename for POST requests
...
so we can return it in the "Location:" header subsequently
2015-03-27 20:18:58 +00:00
George Oikonomou
54c1cd05e8
Simplify the page name to script mapping
2015-03-27 20:18:58 +00:00
George Oikonomou
90a3cd8e14
Change the way we handle HTTP response headers
2015-03-27 20:18:58 +00:00
George Oikonomou
733378679f
Prettify httpd top matter in the web demo
2015-03-27 20:11:44 +00:00
Harald Pichler
560117e8f3
Merge branch 'contiki' into osd
2015-03-23 13:07:28 +01:00
Harald Pichler
0097d192be
move dht11 define to project.conf
2015-03-23 13:03:32 +01:00
Antonio Lignan
1af29a5beb
Added SHT25 sensor
2015-03-10 15:33:58 +01:00
George Oikonomou
1fc06b6581
Turn on the CC2538 RF explicitly
2015-02-28 15:01:32 +00:00
Nicolas Tsiftes
bfd2a90e08
Merge pull request #933 from alessandrelli/coap-observe-client
...
Erbium: client-side support for CoAP Observe
2015-02-26 10:06:58 +01:00
Jonas Olsson
0f567e499f
Add CC26xx examples
2015-02-25 13:15:35 +01:00
Daniele Alessandrelli
b6e716233a
er-coap-example: add example for client-side CoAP observe
2015-02-24 22:48:12 +01:00
Harald Pichler
d31ecbf486
Merge branch 'contiki' into osd
2015-02-18 10:04:47 +01:00
Jonas Olsson
2bb7fcc0cb
Fixed doxygen formatting
2015-02-17 16:11:45 +01:00
Jonas Olsson
4fb2bd410f
Add title to doxygen group
2015-02-17 16:07:37 +01:00
Jonas Olsson
6112ec54d3
Add MQTT demo for the cc2538dk platform
2015-02-17 15:58:50 +01:00