Mariano Alvira
024448e65e
add an offset to packet_t to compensate for the added length byte on
...
reception
2010-03-07 17:04:30 -05:00
Mariano Alvira
8421031d4a
condense print_packet output
2010-03-07 16:50:32 -05:00
Mariano Alvira
667b238148
rftest-tx and refine post_tx for fast transmission
2010-03-07 16:49:57 -05:00
Mariano Alvira
4b17c144d0
LEDs now indicate bit position (instead of (1 << pos)) which is more
...
consistent with how everything else works
2010-03-07 15:39:56 -05:00
Mariano Alvira
c218d1bffa
update rftest-rx to use new maca.
2010-03-06 21:47:22 -05:00
Mariano Alvira
0dac24e1eb
this is pretty close to working together.
2010-03-06 19:54:55 -05:00
Mariano Alvira
e8550f26ba
this receive seems to work well.
...
It has checksum errors at 123 byte payloads, but this was tested with
the old rftest-tx --- so the transmit side could be the problem.
2010-03-06 19:14:55 -05:00
Mariano Alvira
2d68c30934
this receive works
2010-03-06 18:48:13 -05:00
Mariano Alvira
0f400b4341
lots of fixes.
...
major fix is adding a completion counter based on packet length to
restart the MACA when it freezes on transmit.
2010-03-06 17:58:49 -05:00
Mariano Alvira
5c20312744
this does 127 B packets as fast as possible (with these settings).
...
Transmitts are every 5.8ms and are 4.48ms long
2010-03-05 19:25:38 -05:00
Mariano Alvira
8e3c2a8622
added locking and interrupt disables.
...
transmit looks pretty good.
2010-03-05 17:06:08 -05:00
Mariano Alvira
5bda57ed39
progress on maca overhaul
2010-03-04 18:52:42 -05:00
Mariano Alvira
20f6a749d1
isr updates
2010-03-04 18:52:04 -05:00
Mariano Alvira
0678e778b1
initial packet error rate test skeleton
2010-03-03 18:48:29 -05:00
Mariano Alvira
46e25b463f
change rf_tests over to using new MACA_CONTROL fields.
2010-03-03 18:47:22 -05:00
Mariano Alvira
43b57ea41a
fix board message
2010-03-03 14:07:00 -05:00
Mariano Alvira
664a058884
status is 16-bit
2010-03-03 13:39:22 -05:00
Mariano Alvira
d4cd92141e
convert to printf
2010-03-03 13:39:14 -05:00
Mariano Alvira
00224dd7eb
pulled put out of lib
...
still need set __putc as a fuction pointer to the uart_putc
2010-03-03 08:09:19 -05:00
Mariano Alvira
4b22b25e38
changed maca.c over to printf
2010-03-02 18:23:23 -05:00
Mariano Alvira
1b4dd3b4dc
use printf instead of put
2010-03-02 17:52:31 -05:00
Mariano Alvira
a00b9f7bd0
better start file
...
removed unnecessary line from tmr-int test
2010-03-02 16:26:42 -05:00
Mariano Alvira
9b05f05503
add uart1_init to loopback test
2010-03-02 16:08:36 -05:00
Mariano Alvira
8bd9f182d4
link objects in as archives so only what we need gets linked.
...
Add an option to build objects without space resevered for rom calls.
2010-03-02 14:32:34 -05:00
Mariano Alvira
225fb3e553
fix these for the putchr and putstr name changes
2010-03-02 10:39:47 -05:00
Mariano Alvira
52bd134d4a
Added ROM_VAR targets
2010-03-02 10:39:23 -05:00
Mariano Alvira
0187cfbf93
Now you can build targets with or without the reserved ROM var space.
2010-03-02 10:38:32 -05:00
Mariano Alvira
8c742bc9c8
add -Werror back it and fix all the errors.
2010-03-01 22:07:43 -05:00
Mariano Alvira
ac0691ea9c
initial printf
...
snprintf blows up the size
printf isn't too small either (about 10KB now)
2010-03-01 17:11:56 -05:00
Mariano Alvira
eb94e7daaf
add ref. crystal trimming.
2010-03-01 13:01:51 -05:00
Mariano Alvira
177606cef3
cleaned up rftest-tx.
2010-02-26 18:27:58 -05:00
Mariano Alvira
d36264ef9e
fix broken build system (since I moved put)
2010-02-26 18:19:10 -05:00
Mariano Alvira
205b53787e
cleaned up rftest-rx a little
2010-02-26 17:44:39 -05:00
Mariano Alvira
d0f8336f13
sleep.
...
had to comment out radio_off since I don't have the maca stuff moved
over yet.
2010-02-26 16:37:20 -05:00
Mariano Alvira
d3fed95235
tmr-ints
2010-02-26 16:15:26 -05:00
Mariano Alvira
cd5e5b1706
tmr
2010-02-26 15:35:57 -05:00
Mariano Alvira
a2b51b0e3c
add flasher
2010-02-26 14:51:01 -05:00
Mariano Alvira
383a965c21
add romimg
2010-02-26 14:22:41 -05:00
Mariano Alvira
6309b16235
config is in config.h now
2010-02-26 14:22:28 -05:00
Mariano Alvira
64824b4ebc
place all the config into config.h
2010-02-26 14:21:46 -05:00
Mariano Alvira
87cd9c7a36
update build system for board specific code that's 'local' to the
...
program you are building.
update tests to consolidate common code.
2010-02-26 14:04:10 -05:00
Mariano Alvira
a791be393b
update nvm-write
2010-02-26 13:03:37 -05:00
Mariano Alvira
8f6e672cc0
fix warnings
2010-02-26 12:53:21 -05:00
Mariano Alvira
9a8004c177
working on nvm-read.
...
fixed lib ordering on link command
2010-02-26 12:37:13 -05:00
Mariano Alvira
59dca22769
clean up default_vreg_init
2010-02-26 07:30:53 -05:00
Mariano Alvira
0c4f5c61ef
need a way to run board specific lowlevel inits
...
like for vreg. this is a start.
2010-02-24 18:47:53 -05:00
Mariano Alvira
637c9ddab2
cleaned up uart1-loopback
2010-02-24 14:45:45 -05:00
Mariano Alvira
289a839161
finish blink tests
2010-02-24 13:35:37 -05:00
Mariano Alvira
f79c71153a
now running just 'make' builds all the targets for all the boards.
2010-02-23 18:54:50 -05:00
Mariano Alvira
dc9473a228
cleanup main makefile
2010-02-23 18:27:12 -05:00
Mariano Alvira
95dccba797
update blinks
2010-02-23 18:19:38 -05:00
Mariano Alvira
8ca9a0269e
better variable defs.
...
touch objdir to fix problem where board.h would try to get created
after it's already been created.
2010-02-23 18:14:32 -05:00
Mariano Alvira
59391d7529
board.h works now
2010-02-23 15:53:00 -05:00
Mariano Alvira
3cc6896981
fix blink-red
2010-02-23 15:52:46 -05:00
Mariano Alvira
1522b72b1e
clean up gpio and leds
2010-02-23 15:16:12 -05:00
Mariano Alvira
dcc2d5299c
for now you must define BOARD.
...
I'd like it to be though that if board isn't defined then it makes
everything.
2010-02-22 19:18:48 -05:00
Mariano Alvira
1759ff01a0
getting there...
2010-02-21 18:47:12 -05:00
Mariano Alvira
5adb6413d7
Hi Mar.
2010-02-21 17:34:27 -05:00
Mariano Alvira
948478193e
checkpoint
2010-02-21 10:25:22 -05:00
Mariano Alvira
8c17fc36d1
starting libmc1322x.a
2009-12-15 14:18:48 -05:00
Mariano Alvira
e340e234c6
clean up
2009-11-04 17:30:18 -05:00
Mariano Alvira
d247a613b7
Not all pins default to GPIO. Setting func_sel to 3 enables GPIO for
...
each pin. Do this.
2009-09-17 16:11:19 -04:00
Mariano Alvira
16f680544c
adding a test that blinks all the GPIO --- good for testing soldering
...
jobs.
2009-09-07 14:39:48 -04:00
Mariano Alvira
611370fe58
removing the old hardcoded type stuff from flasher.
...
doesn't seem to be a problem.
Signed-off-by: Mariano Alvira <mar@devl.org>
2009-08-06 09:56:47 -04:00
Mariano Alvira
3d7125e2a9
put rftests back to channel 11
...
Signed-off-by: Mariano Alvira <mar@devl.org>
2009-08-04 10:54:23 -04:00
Mariano Alvira
e1059a9b15
updated to use the leds on the RedBee hardware and made it a little more general.
...
Signed-off-by: Mariano Alvira <mar@devl.org>
2009-06-22 12:35:39 -04:00
Mariano Alvira
bf9e762a81
moved crm addresses to crm.h
2009-05-27 15:05:25 -04:00
Mariano Alvira
0696772202
more current data with hobby board. 32kHZ mode doesn't seem to use
...
much more power than 2kHz.
2009-05-21 17:30:00 -04:00
Mariano Alvira
34c91a6726
this code starts up the 32kHZ clock
2009-05-21 14:52:27 -04:00
Mariano Alvira
9f075dcf1a
cause TX_ON to flash when transmitting
2009-05-20 20:12:39 -04:00
Mariano Alvira
d8a8d529bc
Sleep works now. Make sure to turn the radio off first.
2009-05-12 17:19:57 -04:00
Mariano Alvira
13656da889
corrected comments about ram retention
2009-05-11 17:26:10 -04:00
Mariano Alvira
5dbd9aa02f
added a few comments
2009-05-11 17:03:20 -04:00
Mariano Alvira
4ca63b9b86
this test demonstrates sleeping in both hibernate and doze.
...
wake up is controlled with the wake up timer.
read the comments for current measurments.
2009-05-11 17:01:31 -04:00
Mariano Alvira
bc59b04bbf
sleep tests.
2009-05-11 15:52:30 -04:00
Mariano Alvira
cb4dd0d23e
reverting this file back to dumping the calibration section.
2009-05-09 15:48:02 -04:00
Mariano Alvira
706da17807
clean up and flash type workaround.
2009-05-09 15:30:54 -04:00
Mariano Alvira
2783ad26f0
clean up debug.
2009-05-09 14:55:48 -04:00
Mariano Alvira
a0db791175
add support for extra write data string.
2009-05-09 14:43:17 -04:00
Mariano Alvira
cd973de335
catch the aux. send.
...
still need to parse it for something like:
0x1e000,0x11223344,0x55667788
2009-05-08 18:04:55 -04:00
Mariano Alvira
3bea9ac2f0
this version of flasher works.
2009-05-08 17:27:24 -04:00
Mariano Alvira
c0b912dca2
flash and burn
...
completely untested.
2009-05-08 12:32:14 -04:00
Mariano Alvira
102149cd91
change write address to be the same as what I'm using as my RIME
...
address.
2009-05-05 16:25:46 -04:00
Mariano Alvira
d231cd0120
this version of nvm-write works because it erases the sector first
...
before writting it.
2009-05-05 15:18:28 -04:00
Mariano Alvira
b6eb7ca6ff
send big packets.
2009-05-03 18:50:47 -04:00
Mariano Alvira
c0bb4cb810
slight timer cleanup
2009-04-24 17:07:15 -04:00
Mariano Alvira
d869766664
using weak links for individual isrs
2009-04-24 16:04:04 -04:00
Mariano Alvira
f421cde7f8
changed tmr test to blink purple
2009-04-22 16:11:32 -04:00
Mariano Alvira
8964c60d9a
enabling thumb only enter user mode in tmr-ints.
...
usermode breaks rftests.
2009-04-22 16:06:35 -04:00
Mariano Alvira
9f31e40864
only go into usermode in the interrupt test... still sorting out the
...
best way to handle this.
2009-04-22 15:14:04 -04:00
Mariano Alvira
bdbf279d0f
tmr imts works. I'm not thrilled with how the interrupts and modes are
...
set... but I'm not sure what to do about it. The big problem is that I
have to be in user mode to service irqs, but I can't enable and
disable F and I in usermode. All I can do is an swi and then have
handler which lets me enable or disable them (like a mini-syscall).
2009-04-22 14:55:40 -04:00
Mariano Alvira
09b15558a1
preliminary interrupts. looks like it is entering the isr but isn't
...
leaving correctly.
2009-04-20 18:31:13 -04:00
Mariano Alvira
e012142abe
initial interrupt stuff
...
taken from Contiki
2009-04-20 14:28:53 -04:00
Mariano Alvira
d25385d2aa
blink blue but with the timer.
2009-04-20 14:15:24 -04:00
Mariano Alvira
b508d138a8
flash init --- makes them work much better.
...
resumeMACAsync on each received packet --- no more lockups.
2009-04-16 17:59:00 -04:00
Mariano Alvira
a5656b81b0
full dis of init exec entry. ready to implement this now.
2009-04-15 19:26:49 -04:00
Mariano Alvira
438c940ed7
nvm read works now.
2009-04-15 17:32:00 -04:00
Mariano Alvira
721173449c
startup code
2009-04-15 15:03:47 -04:00
Mariano Alvira
d75d9d98f5
This makefile seems to do better.
2009-04-15 13:40:21 -04:00
Mariano Alvira
f023a1a8f7
turn on thumb. untested.
...
make system still links in a lot of unnecessary stuff.
2009-04-15 11:58:29 -04:00
