deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

more current data with hobby board. 32kHZ mode doesn't seem to use

Browse source 
much more power than 2kHz.
This commit is contained in:
Mariano Alvira 2009-05-21 17:30:00 -04:00
parent 34c91a6726
commit 0696772202
1 changed files with 31 additions and 29 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

60
tests/sleep.c
View file

@ -62,27 +62,27 @@ void (*crm_gotosleep)(crmSleepCtrl_t *foo) = 0x0000364d;
__attribute__ ((section ("startup"))) void main(void) {
crmSleepCtrl_t crmSleepCtrl;
reg32(GPIO_PAD_DIR0) = 0x00000100;
// reg32(GPIO_PAD_DIR0) = 0x00000100;
reg32(GPIO_DATA0) = 0x00000100;
// reg32(GPIO_DATA0) = 0x00000100;
/* Restore UART regs. to default */
/* in case there is still bootloader state leftover */
*(volatile uint32_t *)UART1_CON = 0x0000c800; /* mask interrupts, 16 bit sample --- helps explain the baud rate */
// *(volatile uint32_t *)UART1_CON = 0x0000c800; /* mask interrupts, 16 bit sample --- helps explain the baud rate */
/* INC = 767; MOD = 9999 works: 115200 @ 24 MHz 16 bit sample */
#define INC 767
#define MOD 9999
*(volatile uint32_t *)UART1_BR = INC<<16 | MOD;
// *(volatile uint32_t *)UART1_BR = INC<<16 | MOD;
/* see Section 11.5.1.2 Alternate Modes */
/* you must enable the peripheral first BEFORE setting the function in GPIO_FUNC_SEL */
/* From the datasheet: "The peripheral function will control operation of the pad IF */
/* THE PERIPHERAL IS ENABLED. */
*(volatile uint32_t *)UART1_CON = 0x00000003; /* enable receive and transmit */
*(volatile uint32_t *)GPIO_FUNC_SEL0 = ( (0x01 << (14*2)) | (0x01 << (15*2)) ); /* set GPIO15-14 to UART (UART1 TX and RX)*/
// *(volatile uint32_t *)UART1_CON = 0x00000003; /* enable receive and transmit */
// *(volatile uint32_t *)GPIO_FUNC_SEL0 = ( (0x01 << (14*2)) | (0x01 << (15*2)) ); /* set GPIO15-14 to UART (UART1 TX and RX)*/
reg32(0x00401ffc) = 0x01234567;
reg32(0x00407ffc) = 0xdeadbeef;
@ -110,11 +110,11 @@ __attribute__ ((section ("startup"))) void main(void) {
/* disable all pullups */
/* seems to make a slight difference (2.0uA vs 1.95uA)*/
// reg32(GPIO_PAD_PU_EN0) = 0;
// reg32(GPIO_PAD_PU_EN1) = 0;
// reg16(ADC_CONTROL) = 0; /* internal Vref2 */
reg32(GPIO_PAD_PU_EN0) = 0;
reg32(GPIO_PAD_PU_EN1) = 0;
reg16(ADC_CONTROL) = 0; /* internal Vref2 */
// reg16(CRM_XTAL_CNTL) = 0x052; /* default is 0xf52 */ /* doesn't anything w.r.t. power */
reg16(CRM_XTAL_CNTL) = 0x052; /* default is 0xf52 */ /* doesn't anything w.r.t. power */
#if USE_32KHZ
/* turn on the 32kHz crystal */
@ -125,7 +125,6 @@ __attribute__ ((section ("startup"))) void main(void) {
clear_bit(reg32(CRM_RINGOSC_CNTL),0);
/* enable the 32kHZ crystal */
set_bit(reg32(CRM_XTAL32_CNTL),0);
// reg32(CRM_XTAL_CNTL) = 0;
/* set the XTAL32_EXISTS bit */
/* the datasheet says to do this after you've check that RTC_COUNT is changing */
@ -136,8 +135,6 @@ __attribute__ ((section ("startup"))) void main(void) {
old = reg32(CRM_RTC_COUNT);
puts("waiting for xtal\n\r");
while(reg32(CRM_RTC_COUNT) == old) {
// put_hex32(reg32(CRM_RTC_COUNT));
// puts("\n\r");
continue;
}
/* RTC has started up */
@ -145,34 +142,39 @@ __attribute__ ((section ("startup"))) void main(void) {
set_bit(reg32(CRM_SYS_CNTL),5);
puts("32kHZ xtal started\n\r");
/* while(1) { */
/* put_hex32(reg32(CRM_RTC_COUNT)); */
/* puts("\n\r"); */
/* } */
}
#endif
/* go to sleep */
// reg32(CRM_WU_CNTL) = 0; /* don't wake up */
// reg32(CRM_WU_CNTL) = 0x1; /* enable wakeup from wakeup timer */
// reg32(CRM_WU_TIMEOUT) = 1875000; /* wake 10 sec later if doze */
// reg32(CRM_WU_TIMEOUT) = 20000; /* wake 10 sec later if hibernate w/2kHz*/
// reg32(CRM_SLEEP_CNTL) = 1; /* hibernate, RAM page 0 only, don't retain state, don't power GPIO */ /* approx. 2.0uA */
// reg32(CRM_SLEEP_CNTL) = 0x41; /* hibernate, RAM page 0 only, retain state, don't power GPIO */ /* approx. 10.0uA */
// reg32(CRM_SLEEP_CNTL) = 0x51; /* hibernate, RAM page 0&1 only, retain state, don't power GPIO */ /* approx. 11.7uA */
// reg32(CRM_SLEEP_CNTL) = 0x61; /* hibernate, RAM page 0,1,2 only, retain state, don't power GPIO */ /* approx. 13.9uA */
// reg32(CRM_SLEEP_CNTL) = 0x71; /* hibernate, all RAM pages, retain state, don't power GPIO */ /* approx. 16.1uA - possibly with periodic refresh*/
// reg32(CRM_SLEEP_CNTL) = 0xf1; /* hibernate, all RAM pages, retain state, power GPIO */ /* approx. 16.1uA - possibly with periodic refresh*/
// reg32(CRM_WU_CNTL) = 0; /* don't wake up */
reg32(CRM_WU_CNTL) = 0x1; /* enable wakeup from wakeup timer */
// reg32(CRM_WU_TIMEOUT) = 1875000; /* wake 10 sec later if doze */
#if USE_32KHZ
reg32(CRM_WU_TIMEOUT) = 327680*2;
#else
reg32(CRM_WU_TIMEOUT) = 20000; /* wake 10 sec later if hibernate w/2kHz*/
#endif
/* hobby board: 2kHz = 11uA; 32kHz = 11uA */
// reg32(CRM_SLEEP_CNTL) = 1; /* hibernate, RAM page 0 only, don't retain state, don't power GPIO */ /* approx. 2kHz = 2.0uA */
/* hobby board: 2kHz = 18uA; 32kHz = 19uA */
// reg32(CRM_SLEEP_CNTL) = 0x41; /* hibernate, RAM page 0 only, retain state, don't power GPIO */ /* approx. 2kHz = 10.0uA */
/* hobby board: 2kHz = 20uA; 32kHz = 21uA */
// reg32(CRM_SLEEP_CNTL) = 0x51; /* hibernate, RAM page 0&1 only, retain state, don't power GPIO */ /* approx. 2kHz = 11.7uA */
/* hobby board: 2kHz = 22uA; 32kHz = 22.5uA */
// reg32(CRM_SLEEP_CNTL) = 0x61; /* hibernate, RAM page 0,1,2 only, retain state, don't power GPIO */ /* approx. 2kHz = 13.9uA */
/* hobby board: 2kHz = 24uA; 32kHz = 25uA */
// reg32(CRM_SLEEP_CNTL) = 0x71; /* hibernate, all RAM pages, retain state, don't power GPIO */ /* approx. 2kHz = 16.1uA */
// reg32(CRM_SLEEP_CNTL) = 0xf1; /* hibernate, all RAM pages, retain state, power GPIO */ /* consumption depends on GPIO hookup */
// reg32(CRM_SLEEP_CNTL) = 2; /* doze , RAM page 0 only, don't retain state, don't power GPIO */ /* approx. 69.2 uA */
// reg32(CRM_SLEEP_CNTL) = 0x42; /* doze , RAM page 0 only, retain state, don't power GPIO */ /* approx. 77.3uA */
// reg32(CRM_SLEEP_CNTL) = 0x52; /* doze , RAM page 0&1 only, retain state, don't power GPIO */ /* approx. 78.9uA */
// reg32(CRM_SLEEP_CNTL) = 0x62; /* doze , RAM page 0,1,2 only, retain state, don't power GPIO */ /* approx. 81.2uA */
// reg32(CRM_SLEEP_CNTL) = 0x72; /* doze , all RAM pages, retain state, don't power GPIO */ /* approx. 83.4uA - possibly with periodic refresh*/
// reg32(CRM_SLEEP_CNTL) = 0xf2; /* doze , all RAM pages, retain state, power GPIO */ /* approx. 82.8uA - possibly with periodic refresh*/
// reg32(CRM_SLEEP_CNTL) = 0xf2; /* doze , all RAM pages, retain state, power GPIO */ /* consumption depends on GPIO hookup */
/* crmSleepCtrl.sleepType = 0; */