Harald Pichler
ed161d1905
NETSTACK_CONF_WITH_IPV6
2014-12-07 17:36:53 +01:00
Harald Pichler
9c90608d3c
bugfix hum temp
2014-11-28 14:04:39 +01:00
Harald Pichler
730d9e2d11
add battery
2014-11-27 15:01:07 +01:00
Harald Pichler
1dacefce01
add coap18
2014-11-27 14:07:14 +01:00
Harald Pichler
41f8a9c661
add coap18
2014-11-27 09:30:36 +01:00
Harald Pichler
698d8dce90
add coap18
2014-11-26 21:47:00 +01:00
Harald Pichler
824eca3b61
cleanup code, move ds1820 to resources
2014-11-26 17:12:34 +01:00
Harald Pichler
7a666307cf
add coap 18
2014-11-26 16:46:13 +01:00
Harald Pichler
9eb0c5466f
initial uplaod
2014-11-21 09:44:25 +01:00
Harald Pichler
6167835689
use contiki mac
2014-11-20 16:32:22 +01:00
Harald Pichler
e58322260f
update llayer
2014-11-20 13:43:53 +01:00
Harald Pichler
d8e0dd7005
update to coap rfc
2014-11-19 22:06:38 +01:00
Harald Pichler
8966f7d509
update project to coap 13
2014-11-19 13:59:05 +01:00
Harald Pichler
0620eb86d0
initial upload
2014-11-19 13:58:56 +01:00
Harald Pichler
0c7328b59d
initial upload
2014-11-19 13:58:50 +01:00
Harald Pichler
dfaa8c0f32
initial upload
2014-11-19 13:58:32 +01:00
Harald Pichler
914f5b931b
initial upload
2014-11-19 13:58:24 +01:00
Harald Pichler
1b40bccb00
initial upload
2014-11-19 13:58:02 +01:00
powermik
8bb7d82a2d
UNSUPPORTED_MADIA_TYPE is a typo
2014-11-19 13:55:59 +01:00
Harald Pichler
21bbe79079
use Arduino like optotriac driver
2014-11-19 13:54:53 +01:00
Harald Pichler
026b961d5e
simplify code, bugfixes PE3
2014-11-19 13:54:42 +01:00
Ralf Schlatterbeck
53cf5ab6cf
Fix A0-A5 ADC constants, use in example sketch
2014-11-19 13:53:59 +01:00
Ralf Schlatterbeck
fbe6ae6a60
Fix off-by-one error in digitalPinToTimer
2014-11-19 13:53:53 +01:00
Ralf Schlatterbeck
ddbfd6712c
Remove obsolet macro in example
2014-11-19 13:53:44 +01:00
Ralf Schlatterbeck
abdf6f8c6b
Refactor A/D conversion in adc.c
...
Now the necessary settings are in adc.h. Refactored to allow repeated
ADC reads without reinitialization. Arduino allows setting
analogReference, this is now also implemented.
ADC is now initialized to sane values in apps/arduino/arduino-process.c
dev/arduino/arduino-compat.h now has all hardware independent settings
for arduino (some moved from platform/osd-merkur/dev/hw-arduino.h).
turnOffPWM re-implemented with hw_timer, removed from wiring_digital.c
ADC-specific arduino stuff moved to arduino-compat.h
Arduinos wiring_analog no longer necessary.
arduino-sketch example now reads analog inputs 1 and 5 using analogRead.
2014-11-19 13:53:32 +01:00
Ralf Schlatterbeck
d5284eebe1
Factor resources, fix time
...
Now there is a generic resource that can generate and parse
application/json as well as text/plain. It can be re-used, only the
from_string and to_string routines have to be written and the resource
properly set up. A new resource format is specified, see
GENERIC_RESOURCE in, e.g., examples/osd/pwm-example. This is now used in
all my examples, namely pwm-example, arduino-sketch, wallclock-time.
There was an off by one error for the month in time formatting (in
gmtime and localtime). And the leap-year computation was broken. Both
fixed now, so we get a correct date. For localtime we are still 2 hours
off because daylight saving isn't implemented yet.
Also renamed gmtime to utc.
2014-11-19 13:53:12 +01:00
Ralf Schlatterbeck
c46d6afa39
Make Arduino timer stuff work on Contiki
...
New discovery: Contiki also uses timer 0. With almost the same interface
as Arduino. So we now completely get rid of wiring.c (only the main
file, the other wiring_xxx stay) and implement Arduino timer, delay, etc
in terms of the corresponding Contiki routines. Verified that now delay
works as expected. The LED in examples/osd/arduino-sketch blinks!
Before this, the arduino_init routine in wiring.c destroyed the timer-0
initialization of contiki, making both, contiki timer implementation
*and* contiki timer implementation fail if the arduino_init routine was
called. Now both work.
Squashed with following bug-fix commit.
2014-11-19 13:50:58 +01:00
Ralf Schlatterbeck
b6be226e69
Add Arduino compatibility layer
...
We can now directly compile arduino sketches (.pde) files.
Arduino compatible analogWrite works now.
But there is still a long way to go, serial I/O and timer stuff (delay,
millis etc) currently don't work (not tested but I don't expect this to
work).
It can be used in an arduino sketch or in a normal contiki program.
We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's
Arduino compatible. If you need different frequencies see native timer
usage in examples/osd/pwm-example
In a contiki program you have to call arduino_pwm_timer_init to
initialize the timer before pwm works. The arduino sketch wrapper
already does this.
For running a sketch, see examples/osd/arduino-sketch
2014-11-19 13:48:05 +01:00
Ralf Schlatterbeck
cfec3c6e2d
Initial implementation of avr hardware timer
...
Mainly for PWM use for now.
With example to set the LED to different brightness via COAP.
We switch the LED with 50 kHz (20µs) in this example.
2014-11-19 13:47:37 +01:00
Ralf Schlatterbeck
b4fb8c3f52
Add wallclock time handling
...
New application and new example.
We use the built-in timer routines and add an offset to get the
wallclock time. The offset can be set by time-changing routines
(currently only settimeofday).
We also maintain an offset for timezone handling but this isn't
currently fully implemented.
2014-11-19 13:43:45 +01:00
Harald Pichler
b886a1faaf
initial upload
2014-11-19 13:43:19 +01:00
Harald Pichler
15bab74093
initial upload
2014-11-19 13:43:12 +01:00
Harald Pichler
465eb28382
cleanup code
2014-11-19 13:43:05 +01:00
Harald Pichler
38dbf611e6
add Arduino pin definition and commands
2014-11-19 13:42:57 +01:00
Ralf Schlatterbeck
56f6f87c94
Allow changing bootloader_get_mac address
...
Current default in the Makefile is the *new* bootloader address.
But for backward compatibility we've modified the run*.sh files
to use the old address. The run*.sh also now explain how to change
the default.
2014-11-19 13:42:35 +01:00
Harald Pichler
1efbe0736a
change resources to simple and make climate2 default
2014-11-19 13:42:13 +01:00
Harald Pichler
d90e0d622d
get s/button ->show button status 0/1
2014-11-19 13:42:05 +01:00
Harald Pichler
c106898d2b
add 0.5s delay between off and on
2014-11-19 13:41:54 +01:00
Harald Pichler
94d764e4cb
add timer and shutter functionality
2014-11-19 13:41:48 +01:00
Harald Pichler
4d383eb923
change to port F6,F7
2014-11-19 13:41:18 +01:00
Harald Pichler
678891a1a9
change battery and cpttem format to xx.xx
2014-11-19 13:41:08 +01:00
Harald Pichler
a656cf1dcd
add shutter control resources, reset,timer
2014-11-19 13:41:00 +01:00
Harald Pichler
03a4081913
add contiki led, remove led1,led2
2014-11-19 13:40:52 +01:00
Harald Pichler
8905f35d72
simplify project-conf.h
2014-11-19 13:40:45 +01:00
Harald Pichler
26b1e874d6
bugfix statusled include
2014-11-19 13:40:38 +01:00
Harald Pichler
affe81cc6d
bugfix includes and names
2014-11-19 13:40:29 +01:00
Harald Pichler
1ca7b52217
remove not needed binary files
2014-11-19 13:39:43 +01:00
Harald Pichler
46df18ceb1
add /s/cputemp resource
2014-11-19 13:39:26 +01:00
Harald Pichler
a90a6e0f65
add /p/name and p/model resource, remove info
2014-11-19 13:39:19 +01:00
Marcus Priesch
630bd8e9e4
Factored to support configurable amount of pwm's, fixes
2014-11-19 13:38:58 +01:00
Marcus Priesch
85d29b6473
initial check in
2014-11-19 13:38:51 +01:00
Harald Pichler
088c7118e0
compile all osd-examples
2014-11-19 13:38:38 +01:00
Harald Pichler
4760891bb4
simplified led resource to one led actuator
2014-11-19 13:38:29 +01:00
Harald Pichler
425f348daa
initial upload
2014-11-19 13:38:16 +01:00
Harald Pichler
11b13a7a7e
remove link status and bugfix params.c
2014-11-19 13:37:41 +01:00
Harald Pichler
f2bd00b660
add patch milligrad ds1820 from Jan-Benedict Glaw
2014-11-19 13:37:33 +01:00
Harald Pichler
9906e9736c
temp and hum sensors values xxxx -> xx.xx
2014-11-19 13:37:21 +01:00
Harald Pichler
e5baf940e7
add dhtxx temp coap
2014-11-19 13:37:13 +01:00
Harald Pichler
1b04a24022
config panid over defines
2014-11-19 13:37:06 +01:00
Harald Pichler
8b323633cd
define new tria pins, configurable type ligt or shutter or plug
2014-11-19 13:36:58 +01:00
Harald Pichler
35668c8aed
initial upload
2014-11-19 13:36:52 +01:00
Harald Pichler
7ea29294d7
cleanup code add coap13 support
2014-11-19 13:36:44 +01:00
Harald Pichler
fd57fcef72
cleanup code, add coap13 support
2014-11-19 13:36:28 +01:00
Harald Pichler
a9b36497f6
del unused files
2014-11-19 13:36:19 +01:00
Harald Pichler
3a3091c884
del unused file
2014-11-19 13:36:10 +01:00
Harald Pichler
f7e4fb6499
code cleanup
2014-11-19 13:35:58 +01:00
Harald Pichler
cc950ace98
cleanup code
2014-11-19 13:35:47 +01:00
Harald Pichler
96f1264120
remove old project use climate instead
2014-11-19 13:35:36 +01:00
Harald Pichler
fa7920952f
delete old example
2014-11-19 13:35:27 +01:00
Harald Pichler
c3f00a7106
cleanup code
2014-11-19 13:35:18 +01:00
Harald Pichler
829cd2517d
cleanup code
2014-11-19 13:35:10 +01:00
Harald Pichler
09813190aa
20 neighbors with status and routes
2014-11-19 13:34:55 +01:00
Harald Pichler
171c1290c3
update boarder router to new rpl tables
2014-11-19 13:34:47 +01:00
Harald Pichler
e2edd006d4
initial upload
2014-11-19 13:34:27 +01:00
Harald Pichler
837f70770a
cleanup plattform defines, disable energest, radiostatistics
2014-11-19 13:34:20 +01:00
Harald Pichler
29c7297591
bugfix RH03 sensor
2014-11-19 13:33:50 +01:00
Harald Pichler
45ede69308
add dht22 and RHT03 support
2014-11-19 13:33:40 +01:00
Harald Pichler
7cc5312937
update coap13
2014-11-19 13:33:02 +01:00
Harald Pichler
666ca8436b
bugfix wrong define
2014-11-19 13:32:53 +01:00
Harald Pichler
bd45ee7aea
add coap 13 support
2014-11-19 13:32:23 +01:00
Harald Pichler
d85ce4b42b
initial upload
2014-11-19 13:32:12 +01:00
Harald Pichler
decc9fcb0f
bugfix buffers
2014-11-19 13:32:03 +01:00
Harald Pichler
21bd674622
bugfix buffers
2014-11-19 13:31:53 +01:00
Harald Pichler
0881290bbc
add coap 13
2014-11-19 13:24:58 +01:00
Harald Pichler
532063c422
bugfix compile error
2014-11-19 13:24:47 +01:00
Harald Pichler
89723ebfa8
bugfix hw_init()
2014-11-19 13:24:32 +01:00
Harald Pichler
deea693f82
bugfix led button battery
2014-11-19 13:24:06 +01:00
Harald Pichler
ba2e08aebf
update to caop 13
2014-11-19 13:23:28 +01:00
Harald Pichler
e9c033688b
bugfix
2014-11-19 13:21:52 +01:00
Harald Pichler
15709add91
initial upload
2014-11-19 13:20:12 +01:00
Harald Pichler
d5ca328050
initial upload
2014-11-19 13:14:29 +01:00
Harald Pichler
558184f106
remove unused code, bugfix const
2014-11-19 13:14:07 +01:00
Harald Pichler
3f9e1962a1
bugfix accept type const
2014-11-19 13:13:58 +01:00
Harald Pichler
909bdd2d90
bugfix pullup key_init
2014-11-19 13:13:50 +01:00
Harald Pichler
d1bf2bbb69
add button logic
2014-11-19 13:13:41 +01:00
Harald Pichler
a66fb13e4f
cleanup debug prints
2014-11-19 13:13:09 +01:00
Harald Pichler
795580b6ae
bugfix ->startup led red off
2014-11-19 13:12:51 +01:00
Harald Pichler
245d801862
add merkurboard coap client demo
2014-11-19 12:14:24 +01:00
Harald Pichler
a4986b71dc
add isr
2014-11-19 12:14:08 +01:00
Harald Pichler
b992fc43cc
etimer read buttons
2014-11-19 12:13:51 +01:00
Harald Pichler
617dfba4cb
add pcint buttons
2014-11-19 12:13:33 +01:00
Andreas Reder
03b7dc8719
added run.sh and flash.sh
2014-11-19 12:13:09 +01:00
Harald Pichler
673b167f8f
cleanup er-rest-example-merkurboard
2014-11-19 12:11:40 +01:00
Marcus Priesch
42c28e0bf7
timer4 servo pwm
2014-11-19 12:11:19 +01:00
Marcus Priesch
277f63d76a
timer4 servo pwm
2014-11-19 12:10:09 +01:00
Harald Pichler
54114b0943
many bugfixes, add cputemp
2014-11-19 12:07:31 +01:00
Harald Pichler
b33ea9659c
add relay
2014-11-19 12:07:22 +01:00
Harald Pichler
fbd4b0be9c
add debug led code
2014-11-19 12:07:14 +01:00
Harald Pichler
e645833a99
add light-actor
2014-11-19 12:06:54 +01:00
Harald Pichler
8c08364cad
add servo example
2014-11-19 12:06:45 +01:00
Harald Pichler
cb41c216e9
bugfix compile and flash
2014-11-19 12:06:34 +01:00
Harald Pichler
f6fa014a1f
add merkur board example
2014-11-19 12:06:23 +01:00
Harald Pichler
300716164c
change plattform to osd-merkur
2014-11-19 12:05:54 +01:00
Harald Pichler
c5a9a22e0f
change plattform to osd-merkur
2014-11-19 12:05:46 +01:00
Harald Pichler
3c142b8bbb
change plattform to osd-merkur
2014-11-19 12:05:35 +01:00
Harald Pichler
562434e90e
change plattform to osd-merkur
2014-11-19 12:05:27 +01:00
Harald Pichler
e9196aebb7
change plattform to osd-merkur
2014-11-19 12:05:19 +01:00
Harald Pichler
30b8d433f9
change plattform to osd-merkur
2014-11-19 12:05:12 +01:00
Harald Pichler
37d8ca16fe
change plattform to osd-merkur
2014-11-19 12:05:03 +01:00
Harald Pichler
81e6734626
add climate example
2014-11-19 12:04:53 +01:00
Harald Pichler
cd194ae1ab
remove old files
2014-11-19 12:04:20 +01:00
Harald Pichler
d00df76ada
cleanup project
2014-11-19 12:04:04 +01:00
Harald Pichler
892de50059
cleanup code
2014-11-19 12:03:50 +01:00
Harald Pichler
c4c92ea630
add button sensor with debug
2014-11-19 12:03:35 +01:00
Harald Pichler
fc6055b420
initial upload
2014-11-19 12:03:04 +01:00
Harald Pichler
ff15332aa5
change rt tag and disable energest and radio stat
2014-11-19 12:02:39 +01:00
Harald Pichler
808a249862
add battery sensor
2014-11-19 12:01:49 +01:00
Harald Pichler
ab3f3c8644
setup 15 NBR 50 DS6-Route
2014-11-19 12:01:22 +01:00
Harald Pichler
2c172bfd31
update to latest version
2014-11-19 12:01:09 +01:00
Harald Pichler
30b5333123
remove if attribute
2014-11-19 12:00:59 +01:00
Harald Pichler
c4d8e6a6e8
use ds1820.c from /dev directory
2014-11-19 12:00:28 +01:00
Harald Pichler
5ac3e3a220
new dht11 uri schema
2014-11-19 12:00:01 +01:00
Harald Pichler
9e2f71b7d8
add sensors, internal temperature, battery
2014-11-19 11:59:37 +01:00
Harald Pichler
3019a8e3ef
add DHT11 humidity sensor
2014-11-19 11:58:21 +01:00
Harald Pichler
a6a1a7b375
initial upload
2014-11-19 11:57:16 +01:00
Harald Pichler
17c7e35621
initial upload
2014-11-19 11:56:43 +01:00