1705 commits

Author	SHA1	Message	Date
adamdunkels	bbab7ba55c	When the tmote-bsl binary is found, program only one mote at once (parallel programming with tmote-bsl doesn't seem to work)	2009-04-29 11:42:56 +00:00
fros4943	9f299c277e	added experimental slip support for contiki motes	2009-04-23 09:15:51 +00:00
fros4943	9bd3d07510	implemented slip_arch_writeb() function	2009-04-23 09:02:06 +00:00
fros4943	b65014d1be	bugfix by Wolf-Bastian Pöttner: check buffer size at incoming radio data	2009-04-16 14:38:41 +00:00
fros4943	bc6704079c	cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization	2009-04-16 14:34:51 +00:00
adamdunkels	2e37fca49f	Check for tmote-bsl-linux binary under linux, and use it is available	2009-04-10 07:43:29 +00:00
adamdunkels	2545fd9069	Hack to make DS2411 ID useable as an Ethernet MAC address (remove multicast bit)	2009-04-10 00:40:08 +00:00
adamdunkels	3415ff26bd	Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS	2009-04-10 00:39:19 +00:00
nvt-se	172ffb74c7	fix compiler warnings. patch from Jesper Karlsson.	2009-04-08 14:56:00 +00:00
nifi	b41b79e3a9	Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets).	2009-04-06 17:18:20 +00:00
nifi	900d8d8e17	changed to use HC01 compression for uip6	2009-04-06 16:01:11 +00:00
nifi	8b41f3a6a8	set rime addr size to 8 for uip6, restored clock resolution	2009-04-06 14:59:49 +00:00
nifi	76b7bf43d0	added setup for uip6 with 802.15.4 frames and routing using Rime	2009-04-06 14:12:58 +00:00
nifi	a36e529df1	added configuration for panid	2009-04-06 13:31:00 +00:00
nvt-se	f53560f6a5	enabled multihop routing, increased uip buffer size.	2009-04-06 13:23:14 +00:00
nifi	c1d490b6a7	added workaround for memcpy/memset bug in mspgcc	2009-04-06 13:07:37 +00:00
adamdunkels	58331e6802	Made tick resultion more fine-grained to support a shorter LPP listen time	2009-04-03 11:46:48 +00:00
fros4943	b730fb329d	changed upload rules due to problems on linux platforms	2009-04-02 11:15:30 +00:00
fros4943	3b3580e439	disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki	2009-04-01 18:11:48 +00:00
fros4943	aa736322e1	removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead	2009-04-01 17:17:55 +00:00
fros4943	3665422d8d	simplified cooja communication stacks initialization + added uipv6 stack	2009-04-01 13:50:12 +00:00
fros4943	6a99a82516	copied uipv6 configuration from native platform	2009-04-01 13:46:56 +00:00
fros4943	1c031504e5	no need to initialize serial line	2009-04-01 13:46:16 +00:00
fros4943	892bfb5678	moved radio-uip link functionality directly to comm stack sources	2009-04-01 13:45:41 +00:00
fros4943	eddd8350c5	renamed radio driver	2009-04-01 13:44:34 +00:00
fros4943	afed9bb2d0	icnlude packet radio by default	2009-04-01 13:39:54 +00:00
nifi	c6b15c289e	* show radio channel at startup ... * only initialize timesynch when timesynch is enabled	2009-03-31 13:25:50 +00:00
nvt-se	e90149b7b4	avoid switching mode when tx or rx is active. ... based on suggestions from Frederik Hermans and some code from Jesper Karlsson.	2009-03-30 14:07:34 +00:00
fros4943	5f1fda0406	removed unused variables + writing serial data in timeevent	2009-03-26 16:23:47 +00:00
fros4943	dda6de8438	+ clock stub functions	2009-03-26 16:22:36 +00:00
fros4943	ac22ad5081	changed the Makefile rules for uploading to sky-nodes. ... the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed	2009-03-26 13:29:44 +00:00
nvt-se	04bd414e1c	enabled LPP by default.	2009-03-26 12:51:55 +00:00
nvt-se	90b9b9bae3	configure LPP parameters with slightly longer listen time since the CC1020 ... driver switches from TX mode to RX mode rather slowly. decreased CCA check timeout.	2009-03-26 12:47:12 +00:00
nvt-se	25cc327acc	avoid hanging in TX mode after CCA check failed. ... minor memory savings.	2009-03-25 15:25:05 +00:00
nvt-se	96fbf3b853	use old style C comments. ... convert printf to PRINTF. remove unnecessary MS_DELAY calls from setupTX and setupRX.	2009-03-24 15:32:26 +00:00
nvt-se	15c447e57e	remove some unnecessary instructions and function calls. patch from Jesper Karlsson.	2009-03-24 15:13:11 +00:00
nvt-se	143c7f9cea	switched from serial to serial_line. patch from Jesper Karlsson.	2009-03-24 15:02:03 +00:00
fros4943	c76f34ff98	minor serial test application update	2009-03-21 15:47:40 +00:00
fros4943	9c9165dc90	start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations	2009-03-20 13:23:44 +00:00
nvt-se	6b22fa60e8	- avoid costly rx state initialization if the radio is already on. ... - code formatting.	2009-03-19 14:43:31 +00:00
nvt-se	8f85355f02	print the MAC protocol name when starting the node	2009-03-19 14:14:06 +00:00
nvt-se	b9ef907690	enable serial line tools using the same commands as the sky platform's Makefile	2009-03-17 22:27:14 +00:00
nvt-se	7e329ab467	removed obsolete file.	2009-03-17 22:20:04 +00:00
adamdunkels	b1cd9c207a	Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include	2009-03-17 21:51:13 +00:00
adamdunkels	727c5a2dbe	Renamed serial module to serial-line	2009-03-17 20:32:22 +00:00
adamdunkels	b20f0884ed	Renamed serial module to serial-line	2009-03-17 20:19:11 +00:00
adamdunkels	0076bfe8a5	Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy	2009-03-17 15:56:32 +00:00
nvt-se	7f3def31b7	removed duplicate inclusion of header, and sorted the entries.	2009-03-17 15:02:19 +00:00
nvt-se	6d0fc26ec1	disabled unstable SD driver.	2009-03-17 15:01:40 +00:00
fros4943	d6ebba536c	minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4	2009-03-13 14:40:07 +00:00
adamdunkels	65eb5fd4e8	Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).	2009-03-12 21:58:20 +00:00
dak664	932fc9f748	Remove tab that was preventing cgi invokation	2009-03-12 21:37:22 +00:00
adamdunkels	5920a86312	Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps	2009-03-12 19:15:23 +00:00
fros4943	99b9e80de9	make all quickstart target phony	2009-03-12 17:48:23 +00:00
fros4943	72fdf5b379	make quickstart goal precious	2009-03-12 15:12:50 +00:00
fros4943	063bf88f90	cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work ... + cygwin path fix for quickstart	2009-03-12 13:04:10 +00:00
nvt-se	80bbc92ffe	patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known ... in the header.	2009-03-12 12:23:22 +00:00
fros4943	5d27841807	+ contiki app object	2009-03-11 08:40:37 +00:00
fros4943	bcb34297df	reimplemented quickstart functionality	2009-03-11 07:45:54 +00:00
fros4943	0bc10750bc	added rule for .cooja target. ... compiling for cooja is now similar to other platforms, for example: make hello-world.cooja TARGET=cooja	2009-03-10 21:23:38 +00:00
julienabeille	0395ff5f39	sicslowpan Typo	2009-03-09 08:19:07 +00:00
c_oflynn	41c19115d2	fix compiling ravenusb platform	2009-03-06 15:21:45 +00:00
adamdunkels	3848bba210	Added support for serial data input	2009-03-06 00:13:56 +00:00
adamdunkels	8afff893f1	Removed old \mainpage documentation to avoid confusion with the main \mainpage	2009-03-02 22:04:14 +00:00
fros4943	3774395c82	cfs example updated	2009-03-02 09:44:07 +00:00
fros4943	286065b584	cfs updated	2009-03-02 09:34:47 +00:00
adamdunkels	e3043b1be2	Enable communication power accounting for xmac by default	2009-03-01 20:43:37 +00:00
adamdunkels	ac9ab9c582	#include lib/random.h	2009-03-01 20:42:10 +00:00
nvt-se	47d70f2ae3	Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.	2009-03-01 12:00:00 +00:00
nvt-se	b47221672a	switched cfs offset type to signed long to allow backward movements with cfs_seek.	2009-02-28 13:41:16 +00:00
fros4943	9c8c4898f7	updating cooja cfs stubs according to recent commits	2009-02-27 16:06:25 +00:00
nvt-se	9f8f773b43	use unsigned long as cfs offset type.	2009-02-27 14:53:15 +00:00
oliverschmidt	03e7eb2535	Fixed comment (just to make sure that committing still works after all these months).	2009-02-27 07:57:13 +00:00
nvt-se	9b548619ed	removed redundant definitions.	2009-02-25 23:57:13 +00:00
adamdunkels	d761dfebd1	Bugfix: reduced the size of the uIP buffer to account for MAC header space	2009-02-25 10:23:03 +00:00
nvt-se	c148e2e7ea	Do not include codeprop.h by default.	2009-02-23 14:44:26 +00:00
nifi	0db6403c5d	removed unnecessary reference to codeprop.h	2009-02-21 11:23:54 +00:00
adamdunkels	7781bbea58	Enabled X-MAC announcements by default, disabled polite broadcast announcements by default	2009-02-14 22:52:24 +00:00
adamdunkels	585620c102	Reverted the recent change from random_rand() to rand(). It turned out that ... since libc rand() returns a signed int, there were frequently problems with timer values wrapping. By reverting to random_rand(), we can provide a random generator that returns an unsigned and the timer problems are solved.	2009-02-11 11:08:53 +00:00
fros4943	f1fc4c879f	cfs_coffee_get_fd_set() was renamed	2009-02-09 10:09:13 +00:00
nvt-se	d0a546b049	A long refactoring session yielded the following. ... Technical changes: * Factored out file specific information from the file descriptor structure into a new file structure. - Useful file metadata can be stored after the file is closed. - File descriptors become much smaller. - Significantly reduces the need to scan for the file end. * Use correct types in all function signatures. * Removed the directory cache. Results: * Enormous speed increase when opening cached files (10x-20x.) * Multiple fd:s pointing to the same file have the correct semantics. * About 100 bytes smaller ROM size. * Slightly smaller static RAM size.	2009-02-08 17:08:13 +00:00
adamdunkels	440899e4cb	Seed rand() with the node ID + MAC address	2009-02-07 16:49:36 +00:00
adamdunkels	5cf0c25ca6	A few more minor fixes	2009-02-04 20:58:05 +00:00
adamdunkels	96882c402a	Fixed conformance to Contiki code style :)	2009-02-04 20:55:41 +00:00
joxe	9689a579be	added DCO/CPU speed re-synch each 30 seconds	2009-02-04 19:32:20 +00:00
fros4943	c16921f108	checkpointing library implemented for the sky platform (cfs interface is currently not optimized)	2009-02-04 17:51:49 +00:00
zhitao	5789bf5596	Modified comments for receiver filter bandwidth settings	2009-02-02 08:52:49 +00:00
joxe	e5f0d786a8	fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted	2009-01-31 12:45:03 +00:00
fros4943	603740b13b	removed compiler warning by returning 0 at undefined value	2009-01-23 17:08:17 +00:00
fros4943	ebcaf8eec8	removed compilation warning due to unused is_gateway variable (outside uIP mode)	2009-01-19 13:44:04 +00:00
adamdunkels	e70b45c102	Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists	2009-01-15 22:12:46 +00:00
adamdunkels	29fe3d8741	Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board	2009-01-15 21:07:03 +00:00
adamdunkels	9f0006fde0	Driver for the acceleromenter sensors on the JCreate board	2009-01-15 21:06:02 +00:00
fros4943	5f3c1a0e12	elfloader executing loaded programs from ram (not rom) by default on msp430 platforms.	2009-01-15 09:04:04 +00:00
joxe	d2dc732435	changed list_pop to return removed element	2008-12-16 09:59:42 +00:00
c_oflynn	5ec6412fbc	*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw	2008-12-10 21:26:05 +00:00
zhitao	a50d5b701e	direct the UART input stream to the default Contiki serial process	2008-12-09 15:56:39 +00:00
nvt-se	79d4d22ee7	replaced usage of 16-bit rimeaddr field.	2008-12-02 16:00:15 +00:00
fros4943	0ab57730f8	removed reference to the removed u16 rime address field	2008-12-01 13:20:51 +00:00
c_oflynn	9fb2c9d836	* Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com> ... * Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions	2008-11-29 15:55:02 +00:00
fros4943	6150d13254	support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson)	2008-11-28 16:41:26 +00:00
zhitao	6b33cf434f	bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead	2008-11-25 16:05:22 +00:00
joxe	55280131fc	added printout of MAC protocol name	2008-11-24 14:31:08 +00:00
fros4943	720357bc60	added log_message() implementation	2008-11-21 10:35:46 +00:00
c_oflynn	8bae6890a8	Changes by "David Kopf" <dak664@embarqmail.com> to: ... -Add hit counter to index.html -Adding link to favicon.png -Fix serving of binary (image) files in avr-makefsdata file Changes by Colin O'Flynn: -Removed extra linebreak in tutorial-raven.txt -Fix to contiki-conf.h in avr-rcb platform	2008-11-18 22:03:12 +00:00
oliverschmidt	7cf3165155	Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.	2008-11-17 22:52:10 +00:00
oliverschmidt	7ac49a573b	Reverted recent change as there's now a general (and actually working) solution in Makefile.include.	2008-11-17 22:40:10 +00:00
nvt-se	98a42524d3	minor formatting changes	2008-11-17 16:18:52 +00:00
zhitao	0be308b7ce	changed RSSI samples count to maximum (=16)	2008-11-17 16:14:09 +00:00
c_oflynn	42dd7c37fc	Changed timeout to 1 second on fragmentation	2008-11-16 16:07:13 +00:00
oliverschmidt	a844636218	Minor docu update.	2008-11-13 20:26:27 +00:00
c_oflynn	699c493866	forgot these files for RCB...	2008-11-13 15:07:52 +00:00
zhitao	29b0d010d5	added #define for platform check	2008-11-13 14:25:47 +00:00
nvt-se	90691eb6a2	crc calculation contributed by Carlo Alberto Buano + some refactoring.	2008-11-11 12:24:43 +00:00
oliverschmidt	d08a218a7a	Minor formatting change.	2008-11-10 22:52:43 +00:00
oliverschmidt	24f04a57b2	Include wget shell command in "standard" shell environments.	2008-11-10 22:23:50 +00:00
oliverschmidt	c109e102c4	Include wget shell command in "standard" shell environments.	2008-11-10 22:10:32 +00:00
nvt-se	1a6c909736	added sd_write declaration.	2008-11-10 14:32:49 +00:00
adamdunkels	34e2734cd9	Use the uip-over-mesh network gateway functionality	2008-11-09 12:30:32 +00:00
adamdunkels	83155d48f9	Moved the network gateway logic to the uip-over-mesh module.	2008-11-09 12:22:04 +00:00
c_oflynn	b6e76a4947	Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface	2008-11-08 17:11:18 +00:00
c_oflynn	f13ec95efa	*** empty log message ***	2008-11-08 03:29:15 +00:00
nvt-se	0c4f7bed8f	temporary fix to get sicslowpan.c working on the Sky platform: ... conventional MAC implementations require a call to the MAC driver's read function.	2008-11-06 20:45:06 +00:00
nvt-se	21e4b4be80	map rime address to mac address for ipv6	2008-11-06 15:14:24 +00:00
nvt-se	c5d9795f92	added initialization for uip6	2008-11-05 15:34:04 +00:00
nvt-se	d1d09ea1fd	added IPV6 configuration.	2008-11-05 14:31:06 +00:00
nvt-se	7ac98ee257	added missing watchdog_periodic	2008-11-04 15:46:59 +00:00
adamdunkels	1d56451d11	Changed the default IP address to match the default setting in tapdev	2008-10-31 18:11:44 +00:00
oliverschmidt	072830d4f2	Migrated project files from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). Almost all changes were required because VC++ 2008 does a parallel build. Therefore all intermediate files need to have unique names. This wasn't the case by default because VC++ doesn't presume seperate projects to build into the same directory - as it is the case with all the *.prg and *.dsc files of Contiki.	2008-10-29 15:03:34 +00:00
oliverschmidt	ebcafc68c8	Migrated solution file from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition).	2008-10-29 14:59:35 +00:00
joxe	bc39f2a86c	added get_rssi_packet for getting RSSI from the last packet received	2008-10-29 09:22:39 +00:00
fros4943	641c48ee00	not limiting random seed to 99	2008-10-28 15:37:34 +00:00
nvt-se	4829ffea50	removed supererogatory file	2008-10-28 14:07:32 +00:00
nvt-se	59012007b9	added an SD example application	2008-10-28 12:56:57 +00:00
nvt-se	1fdb3c21f0	fixed problems with uart and sd cards.	2008-10-28 12:42:53 +00:00
c_oflynn	f301f9d118	Changed copyright.	2008-10-15 15:59:38 +00:00
mvidales	2e2eb8d387	changed stabs to dwarf-2 for debugging.	2008-10-15 15:42:18 +00:00
c_oflynn	1375511179	Fix to allow building without LCD interface	2008-10-15 14:38:20 +00:00
mdurvy	acfe78a51a	last version of the raven lcd user interface	2008-10-15 13:13:49 +00:00
adamdunkels	3428e17cea	Changed the \mainpage doxygen tag to avoid confusion with the main Contiki \mainpage	2008-10-15 12:37:59 +00:00
adamdunkels	ba43d94ef7	Define IPv6 options only if UIP_CONF_IPV6 is defined (which should be defined by the Makefile.include if IPv6 is enabled)	2008-10-15 09:14:25 +00:00
c_oflynn	1c5a27f693	Moved raven-lcd.h file	2008-10-14 22:05:09 +00:00
c_oflynn	6e42bd3496	example\webserver-ipv6-raven works!	2008-10-14 21:29:23 +00:00
c_oflynn	d5865cb2b6	-Change needed for ravenusb to build ... -Reverts Makefile.include back to 1.57, then apply the needed change	2008-10-14 20:31:46 +00:00
c_oflynn	a520fe4646	Lots of changes / commits! This allows ravenusbstick example to build at least.	2008-10-14 19:06:51 +00:00
julienabeille	2238f2e7da	Debugged autoconf for ethernet	2008-10-14 16:50:11 +00:00
julienabeille	08465a6c19	new-ipv6 compiles on native cygwin	2008-10-14 14:00:58 +00:00
julienabeille	4f9bc05f90	ping-ipv6 example compiles on native cygwin	2008-10-14 13:39:12 +00:00
julienabeille	9b2961046a	Modifs to minimal-net for IPv6 support	2008-10-14 10:06:26 +00:00
adamdunkels	0a961b2ada	Contiki port for the Atmel AVR Raven board	2008-10-14 09:40:30 +00:00
nvt-se	aff141f56e	reduced default sizes	2008-10-09 14:56:53 +00:00
fros4943	115a2b0782	renaming printf/putchar/puts symbols to avoid jni library loading overriding our custom implementations ... experimental: directly references objcopy (tested on win32+linux)	2008-10-05 15:43:09 +00:00
fros4943	d79b1d55f7	not implementing putc(..FILE*) function, only stdout	2008-10-05 15:40:27 +00:00
nvt-se	10639bc982	use abstract types for offsets and pages so that we can easily port it to ... very large or small memories.	2008-10-03 19:27:28 +00:00
fros4943	4cc56a741d	printf implementation towards cooja	2008-10-03 09:41:16 +00:00
fros4943	08502eb344	removed refences to printf2log.h	2008-10-03 09:39:38 +00:00
fros4943	2fb6410e4d	removed old printf output conversion method, instead implementing putchar() and printf()	2008-10-03 09:37:32 +00:00
joxe	1a1ddd0bd5	removed energest-arch from sky and esb platforms	2008-09-29 12:38:18 +00:00
nvt-se	9c3f5beec7	added a small guide.	2008-09-26 18:14:12 +00:00
nvt-se	37fa4da899	support 9600 baud	2008-09-19 12:18:04 +00:00
joxe	5b1c229754	fixed battery sensor for sky platform	2008-09-18 21:29:06 +00:00
joxe	5d860b1df2	changed sleep to go into LPM3	2008-09-18 17:58:21 +00:00
joxe	8aa8e26c54	removed redundant sensor initialization, added comment	2008-09-14 20:47:30 +00:00
adamdunkels	0f82635dc9	Bugfix: avoid overflowing the event queue	2008-08-15 19:54:58 +00:00
adamdunkels	35d85897b9	Minor bugfix: the printf() must include the n	2008-08-15 19:34:07 +00:00
nvt-se	deefb97c16	Changed clock value so it is a power of two.	2008-08-14 11:11:34 +00:00
matsutsuka	6c9291f38b	Removed dependency of Cygwin from hexameter.	2008-07-20 07:44:39 +00:00
oliverschmidt	f822ac9797	Added clock_seconds() implementation.	2008-07-12 14:44:37 +00:00
nvt-se	2b68f88e77	moved platform independent definitions	2008-07-11 21:39:26 +00:00
nvt-se	e757cae8ea	removed obsolete definition	2008-07-11 21:36:45 +00:00
nvt-se	e8a85b3726	moved platform independent code to the right place	2008-07-11 21:35:10 +00:00
nifi	9952ee8f26	Ported Coffee to the ESB platform	2008-07-11 15:27:57 +00:00
adamdunkels	b18b84bb0e	Added clock_seconds implementation to minimal-net port	2008-07-10 17:10:39 +00:00
adamdunkels	a8f2e8ca48	Added clock_seconds implementation to win32 port	2008-07-10 17:08:54 +00:00
adamdunkels	6bfe18bce1	Changed startup message	2008-07-09 20:58:25 +00:00
nifi	0d87322a18	minor documentation update and removed unused function prototypes	2008-07-09 20:45:06 +00:00
adamdunkels	710f9cf54b	Removed debug printout	2008-07-09 09:37:50 +00:00
adamdunkels	2023a692d4	Added clock_second() implementation to make th shell work	2008-07-09 09:34:29 +00:00
nifi	f93f501a4d	updated tr1001_send and tr1001_read to match radio driver api	2008-07-08 13:22:31 +00:00
nifi	8718c41945	Fixed compiler warning.	2008-07-08 12:35:05 +00:00
nifi	8db3671d65	- Replaced TR1001 statistics with rimestats ... - Fixed typo in constant name - Changed all occurences of u8_t and u16_t to uint8_t and uint16_t	2008-07-08 12:27:22 +00:00
nifi	6e657ad3d8	Moved old Makefile from platform/esb to backyard/platform/esb	2008-07-08 11:21:51 +00:00
nifi	16f7888b52	changed clock resolution to 64 (needs to be a power of 2) and updated uIP settings	2008-07-08 09:36:48 +00:00
adamdunkels	8e5d255b5b	Moved initialization of the SHT11 until after other initialization: this seems to fix a bug where the SHT11 temperature and humidity values started varying wildly.	2008-07-08 08:23:24 +00:00
adamdunkels	84e4bf7a15	Changed order of initialization to make light sensors work again: a previous change to irq.c seems to have conflicted with light sensor initialization	2008-07-07 23:44:58 +00:00
oliverschmidt	9ac4123f00	Adjusted VC++ project file to recent change regarding cfs implementation (and added preprocessor define _CRT_NONSTDC_NO_DEPRECATE).	2008-07-06 11:06:14 +00:00
oliverschmidt	9d5ae4864e	Added preprocessor define _CRT_NONSTDC_NO_DEPRECATE to allow usage of open(), close(), read(), write() and lseek().	2008-07-06 11:04:33 +00:00
oliverschmidt	c60e91bf59	Moved Win32 cfs directory functions from cfs-win32.c to cfs-win32-dir.c.	2008-07-06 10:24:38 +00:00
oliverschmidt	bf3c92e98c	Leverage split of cfs-posix and cfs-posix-dir by reusing cfs-posix for win32 and replacing only cfs-posix-dir with cfs-win32-dir.	2008-07-06 08:29:37 +00:00
oliverschmidt	86bd7e9829	Added lseek dummy.	2008-07-06 07:34:34 +00:00
oliverschmidt	fa956117f7	Dummies should rather return errors.	2008-07-06 07:32:20 +00:00
oliverschmidt	c00de08dec	Added lseek dummy.	2008-07-06 07:28:42 +00:00
nvt-se	133a314b1c	energest.h moved to sys/	2008-07-04 02:58:58 +00:00
adamdunkels	64b6663b11	moved energest from lib/ to sys/	2008-07-03 23:59:20 +00:00
adamdunkels	c6579d4f08	CFS Coffee arch file for the native platform	2008-07-03 23:13:55 +00:00
adamdunkels	51f4ab8b2c	Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long	2008-07-03 23:12:10 +00:00
adamdunkels	84a42a0bb3	xmem implementation for the native platform	2008-07-03 23:11:27 +00:00
matsutsuka	28bcff539f	path misconfiguration has been fixed	2008-07-02 15:04:07 +00:00
matsutsuka	4cf1687845	shell is removed temporarily since it doesn't work in the current version.	2008-07-02 15:03:44 +00:00
adamdunkels	28331191b3	Changed name of simple-cc2420 to cc2420	2008-07-02 09:38:06 +00:00
adamdunkels	66876625d4	Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.	2008-07-02 09:05:40 +00:00
adamdunkels	dafa1d89a2	Added cc2420-aes.c (functions for interfacing the build-in AES support of the CC2420)	2008-07-02 08:47:05 +00:00
matsutsuka	4ecebdd842	A binary conversion tool has been modified to support variations.	2008-07-02 07:17:14 +00:00
adamdunkels	1586d8f36f	Changed filename of the CC2420 driver from simple-cc2420 to cc2420.	2008-07-01 21:02:51 +00:00
oliverschmidt	c2bec97eef	Added some info on the Apple2 PFS (and AppleCommander).	2008-06-12 22:45:17 +00:00
oliverschmidt	433518c3cb	Just some minor reformatting.	2008-06-12 22:16:50 +00:00
nvt-se	f83000af8a	clear bit when uart edge is set.	2008-05-29 22:06:18 +00:00
nvt-se	36fec8dd01	moved sdspi.c to the sd file list.	2008-05-29 22:04:30 +00:00
adamdunkels	d134a1fcb1	Moved sky-specific make targets from the tools/sky/Makefile to the more natural platform/sky/Makefile.sky. Added a number of convenient targets for accessing the serial port.	2008-05-29 20:15:49 +00:00
nvt-se	44c93fcd93	cleared lock semantics	2008-05-28 13:17:08 +00:00
adamdunkels	7ca33e2285	Reverted inadvertedly committed change to lpp instead of nullmac	2008-05-27 19:07:20 +00:00
nvt-se	fed62e1642	added timeout	2008-05-27 14:22:55 +00:00
nvt-se	07f8875963	added missing header	2008-05-27 14:05:09 +00:00
nvt-se	f2c6f77f7d	removed debug print	2008-05-27 14:04:15 +00:00
adamdunkels	1263eb8455	Moved old unused files to backyard	2008-05-27 13:16:34 +00:00
nvt-se	ce84dce702	reset locks on forced mode switch	2008-05-27 13:05:52 +00:00
nvt-se	9c9c2573c3	lock UART for RS232 in putchar	2008-05-27 13:03:19 +00:00
nvt-se	bff587e32c	lock SPI bus when erasing	2008-05-27 13:01:27 +00:00
nvt-se	a26bcf30f7	added SPI parameters.	2008-05-27 12:25:48 +00:00
oliverschmidt	2ede893aa6	The feature set of gnumake is really frightening: This time I discovered 'target-specific variable values'...	2008-05-26 11:26:57 +00:00
oliverschmidt	f74503c23c	Replace non-fully-functional hack with the new gnumake variable CONTIKI_PROJECT.	2008-05-26 10:13:32 +00:00
oliverschmidt	356f5cfa04	The recent optimizations (usage of language card bank2 through new C-library, logging through ROM routine, removal of unused IP forwarding code) allowed to increase the number of concurrent HTTP conntections from 3 to 7 :-)	2008-05-23 23:13:41 +00:00
oliverschmidt	a78a7dedbc	Added make target 'disk' for creating a .dsk disk image using AppleCommander.	2008-05-22 22:21:43 +00:00
oliverschmidt	7120cf4404	Added make target 'disk' for creating a .d71 disk image using c1541.	2008-05-22 22:19:30 +00:00
oliverschmidt	dc63b33956	Added make target 'disk' for creating a .d64 disk image using c1541.	2008-05-22 22:18:25 +00:00
oliverschmidt	cd1608aa08	Activate uIP forwarding support.	2008-05-22 19:49:48 +00:00
oliverschmidt	e914302e94	Removed check already done in Makefile.include.	2008-05-22 19:45:47 +00:00
oliverschmidt	b750e8cc42	Moved platform/c64/contiki.cfg to tools/c64/sample.cfg	2008-05-21 08:13:04 +00:00
oliverschmidt	5dba39fab1	Moved platform/c128/contiki.cfg to tools/c128/sample.cfg	2008-05-21 08:09:46 +00:00
oliverschmidt	a341f981aa	Moved platform/apple2enh/contiki.cfg to tools/apple2enh/sample.cfg	2008-05-21 07:59:43 +00:00
adamdunkels	8b4179cf45	Moved ctimer_init() so that MAC protocols can use ctimers in their initialization code	2008-05-19 12:07:49 +00:00
adamdunkels	7aa8508e0b	Added display of radio status: a green ring appears around nodes with their radio turned on. Added a command that prints out a .fig file that shows the current network setup (press the 'd' key).	2008-05-14 19:22:57 +00:00
adamdunkels	31ea41d8db	Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level	2008-05-14 19:19:28 +00:00
nvt-se	776f377a69	Configuration for the Sky platform.	2008-04-28 10:34:33 +00:00
joxe	7be3aeeeb5	added sampling mode in sound sensor	2008-04-25 15:55:37 +00:00
fros4943	c4df31376e	cooja hello world (+ include printf2log.h)	2008-04-22 13:07:49 +00:00
nvt-se	73978e3133	only include sdspi.h if WITH_SDC is on.	2008-03-31 14:33:23 +00:00
nvt-se	acf01a0c58	fixed compilation error.	2008-03-31 14:32:00 +00:00
nifi	f916c7b130	initialize ctimer after initialization of process	2008-03-31 14:01:26 +00:00
nvt-se	067e4c3c06	include contiki-conf.h for type definitions.	2008-03-31 13:48:03 +00:00
nvt-se	f7b3d9fc99	moved files to sd/	2008-03-31 13:45:52 +00:00
nvt-se	fdcc145150	added missing file.	2008-03-31 13:43:34 +00:00
nvt-se	2822ff7ddb	made more conform with contiki indentation.	2008-03-28 23:03:05 +00:00
nvt-se	10cabda581	lock wait function from Michael Baar.	2008-03-28 16:06:28 +00:00
nvt-se	bd8809d35d	print information about the SD card, if existent.	2008-03-28 16:02:01 +00:00
nvt-se	6486460e3f	locking bugfix from Michael Baar.	2008-03-28 15:59:58 +00:00
nvt-se	3fec8ee5e7	synced with newer version by Michael Baar.	2008-03-28 15:58:43 +00:00
nvt-se	d5c8b18fc2	added accelerometer test with moving average.	2008-03-27 13:08:35 +00:00
nvt-se	5631c92416	use three different input channels for the accelerometer.	2008-03-27 13:04:59 +00:00
oliverschmidt	85edbc01db	Starting with the cc65-snapshot-2.11.9.20080316 the Apple2 C-library supports placing code in the Apple2 Language Card by choosing the code segment 'HIGHCODE'. By default the memory area 0xD400 - 0xE000 is used for HIGHCODE. If the application doesn't need the ProDOS 8 QUIT code then the memory area used for HIGHCODE may be extended to 0xD000 - 0xE000. ... Contiki now leverages that feature to place process.o, etimer.o and uip_arp.o in HIGHCODE. These files were carefully chosen as: - they are necessary for all Ethernet apps - their size doesn't depend on configuration macros - they fill the available space nicely (with a little reserve for changes in the source or the compiler)	2008-03-24 22:49:00 +00:00
fros4943	b5d09f3822	set default radio channel: 26 ... same as sky platform	2008-03-18 16:22:00 +00:00
fros4943	660bc5e991	changed ss values + added configurable csma mac	2008-03-17 09:48:00 +00:00
nifi	ddcda4582e	ctimer initialized by contiki-esb-main	2008-03-13 15:59:43 +00:00
nifi	3ecd955f01	energest needs to be initialized before network	2008-03-13 15:58:44 +00:00
nifi	79cb912f7c	reduced memory usage, removed procinit, general cleanup of initialization, enabled watchdog	2008-03-07 17:54:22 +00:00
oliverschmidt	9071007e1e	For the Win32 platform build we need to define AUTOSTART_ENABLE even for the Contiki library files to be able to autostart the program handler. ... Note: For this to work the program handler needs to be the first autostart enabled application in the Contiki library. As the GNU archiver guarantees to preserve the order of the object files in a library this can be accomplished by having the program handler the first item in APPS.	2008-03-04 22:55:54 +00:00
adamdunkels	c38d43c387	Change order of initialization so that Rime is initialized before uIP-over-Rime. Send out a new gateway command if a spurious (erroneous) gateway command is received. (Note for the future: this will cause a ping-pong problem with two correct gateways in the network; need to come up with a better solution for this.)	2008-03-03 20:23:53 +00:00
adamdunkels	136443a387	Print out interface address	2008-03-03 20:21:59 +00:00
oliverschmidt	8a4890c9e5	Free up unused file descriptors.	2008-02-28 21:56:47 +00:00
oliverschmidt	368d389970	Free up unused file descriptors.	2008-02-28 21:36:37 +00:00
nvt-se	1d3bae48dd	added sd card support.	2008-02-28 15:49:01 +00:00
nvt-se	2cc0135e35	cleaned up and fixed an error checking problem in the locking code.	2008-02-28 15:11:22 +00:00
fros4943	3b5fa2d8e5	added 5 second delay before actually burning the node id (may otherwise cause problems with the .upload script)	2008-02-25 16:34:56 +00:00
adamdunkels	412facb831	This is an initial commit of an implementation of the Chameleon ... architecture for the Rime stack for Contiki. The Chameleon architecture separates the header processing from the Rime protocol logic. Instead of having each protocol create its own part of the packet header, protocols use packet attributes. Before sending a packet, a special Chameleon header processing module creates a packet header from the packet attributes. The same Chameleon module parses incoming packets and creates packet attributes from the header. The details are in our SenSys 2007 paper: Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication Architecture for Wireless Sensor Networks. In Proceedings of the Fifth ACM Conference on Networked Embedded Sensor Systems (SenSys 2007), Sydney, Australia, November 2007. http://www.sics.se/~adam/dunkels07adaptive.pdf This is a rewrite of the code that was developed for the paper.	2008-02-25 02:14:34 +00:00
adamdunkels	9c57e5e272	Moved old Makefile (non-working) from platform/sky to backyard/platform/sky	2008-02-24 22:22:17 +00:00
adamdunkels	307fc41646	Detect if node is attached to a SLIP line to set node to become the network's gateway	2008-02-24 21:13:03 +00:00
adamdunkels	5bcd0ab60b	Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol	2008-02-24 21:11:35 +00:00
oliverschmidt	d74fd06536	Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file and setting the mouse sprite in order to preserve the existing logic.	2008-02-17 14:12:52 +00:00
oliverschmidt	93789de9dd	Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file in order to preserve the existing logic.	2008-02-17 14:11:48 +00:00
oliverschmidt	df441f50a3	Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE.	2008-02-15 16:51:06 +00:00
nvt-se	a06b85f74b	adjusted uIP parameters.	2008-02-13 15:41:04 +00:00
fros4943	27ac84d009	simlog function declaration	2008-02-11 18:45:18 +00:00
fros4943	4c56fce697	updated cfs_write arguments	2008-02-11 18:40:16 +00:00
adamdunkels	6740d95bfa	Initialize serial line with 115200 bps for SLIP	2008-02-11 10:44:12 +00:00
adamdunkels	fbcf9b6fcf	Disable watchdog while burning node ID	2008-02-11 10:43:47 +00:00
adamdunkels	8058a49d21	Code style fix	2008-02-11 10:43:31 +00:00
oliverschmidt	b252bb9fc9	Removed finally unnecessary cast (and reverted unintentionally commited change).	2008-02-10 22:52:41 +00:00
oliverschmidt	2632f8f937	Removed finally unnecessary cast.	2008-02-10 22:36:36 +00:00
oliverschmidt	0e96534ca8	Now that process initialization has been changed (back) to synchronous it needs to be called after adding program handler menu items in order to preserve the the existing program handler logic.	2008-02-10 19:14:48 +00:00
oliverschmidt	8823dfe250	Adjusted to the new shell.	2008-02-10 12:13:06 +00:00
oliverschmidt	2b1abd87af	Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE (and use it now in the platform build to start the program handler).	2008-02-10 11:29:24 +00:00
oliverschmidt	034bc4ec66	Adjusted to the new shell.	2008-02-09 18:56:26 +00:00
oliverschmidt	614fa668cd	Removed SELFSTART_PROCESS as AUTOSTART_ENABLE generally serves that purpose - and AUTOSTART_ENABLE gets already set as required :-)	2008-02-08 22:48:28 +00:00
oliverschmidt	0655839603	Removed superfluous semicolon.	2008-02-08 12:14:52 +00:00
oliverschmidt	fe6a55d1a4	Accomodate for the now more complex shell output.	2008-02-07 23:06:03 +00:00
oliverschmidt	806f79bb03	Replaced (now obsolete) PROCESS_LOADABLE with SELFSTART_PROCESS.	2008-02-07 16:34:18 +00:00
oliverschmidt	155a27ff59	Switched from (now obsolete) 'process_load' to 'autostart_processes'.	2008-02-07 15:53:43 +00:00
oliverschmidt	a105e1a40c	Added 'const'.	2008-02-06 16:41:19 +00:00
adamdunkels	cb6bc45350	Added code for routing IP packets over low-power radios using the Rime mesh module	2008-02-03 21:03:19 +00:00
adamdunkels	dc43a9713d	Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader	2008-02-03 21:01:36 +00:00
adamdunkels	f5b08ff115	Added a crude hack for drawing lines between nodes	2008-02-03 20:49:50 +00:00
adamdunkels	28a3a51f82	Added uIP ICMP destimation unreachable message generation	2008-01-24 23:09:40 +00:00
adamdunkels	68523814c5	Moved from examples/sky into generic platform/sky/apps so that all examples can use it	2008-01-23 20:34:37 +00:00
adamdunkels	c2ef303c24	Updated for the new simple_cc2420 API	2008-01-23 14:58:01 +00:00
nvt-se	6005437b27	Disable the watchdog during the whole erase operation.	2008-01-21 10:40:26 +00:00
nvt-se	bed0963769	Call watchdog_periodic before erasing each sector, because this operation ... takes approximately 1s.	2008-01-21 10:28:44 +00:00
adamdunkels	685de41feb	Fixed buggy build	2008-01-19 06:57:44 +00:00
nifi	3e0e3d4965	added energest-arch.c	2008-01-18 18:26:02 +00:00
adamdunkels	34bd11905c	Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer	2008-01-14 14:50:01 +00:00
adamdunkels	02ee418313	Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel	2008-01-14 14:22:16 +00:00
adamdunkels	7a356d0fb5	Added support for (simulated) serial data input. Data written to netsim's standard input are now sent as serial data to the main node.	2008-01-14 09:38:16 +00:00
fros4943	4c131d6975	added max printf2log message size	2008-01-11 15:37:38 +00:00
adamdunkels	0cb1efe718	Added cfs-posix	2008-01-08 14:27:28 +00:00
adamdunkels	f935be10c9	Added initalization of the serial library. Changed LPM3 to LPM2 since the current serial driver does not work with LPM3 yet (we need to add start edge detection interrupt support to fix that).	2008-01-08 08:21:03 +00:00
adamdunkels	690805ebe7	Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL	2008-01-08 08:19:56 +00:00
adamdunkels	959c4f3ee2	Removed ENERGEST_CONF_ON which is present in contiki-conf.h anyway	2008-01-08 08:18:00 +00:00
adamdunkels	bd9230b4b3	Added serial input from stdin, removed uIP initialization since uIP is not used anyway, made stdout unbuffered	2008-01-08 08:08:57 +00:00
adamdunkels	b7ab95499f	Added serial and cfs-posix-dir	2008-01-08 08:08:05 +00:00
oliverschmidt	26a554e7c2	Added C128 port. It runs the example webserver both in the cgi and cfs variant - although the latter only with a reduced MTU size due to memory constraints.	2008-01-05 22:30:23 +00:00
oliverschmidt	a9a1a00f27	Moved GTK port to the backyard as it doesn't work for quite some time by now.	2008-01-05 21:06:38 +00:00
oliverschmidt	00d75c8d16	Made use of uip_ipaddr_to_quad().	2008-01-04 23:28:33 +00:00
oliverschmidt	74fc3b4576	Made netsim gateway ip addr on Windows/Cygwin configurable at the command line.	2008-01-04 23:23:29 +00:00
oliverschmidt	5bff4631e4	Minor reformatting.	2008-01-04 23:09:03 +00:00
oliverschmidt	f75d01a428	Log ip addr in the ordinary way.	2008-01-04 22:21:04 +00:00
oliverschmidt	b96c9deebc	Added "usual" comments.	2008-01-04 21:53:32 +00:00
oliverschmidt	bb19396d21	Introduced yet another high-level config macro.	2008-01-01 19:47:03 +00:00
oliverschmidt	852d2c0283	Introduced very lightweight pfs implementation based on Apple ProDOS. ... ProDOS requires for each opened file a user-supplied page-aligned 1024 byte i/o buffer. This makes the generic POSIX file i/o library contained in the cc65 C-library quite heavyweight. In contrast the lightweight pfs implementation uses the uIP packet buffer as ProDOS i/o buffer. Therefore: - Only one file may be open at any time. - That file may not be open while the uIP packet buffer is used by uIP. The open()/read()/close() sequence should be completed before Contiki event scheduling or inside handling a single Contiki event. - The uIP packet buffer must be large enough to hold the ProDOS I/O buffer. Depending on the position of the uIP buffer in memory this means between 1024 and 1024 + 256 bytes. Therefore in an Ethernet environment setting the MTU_SIZE to at least 1266 is safe (So the default of 1500 is just fine).	2008-01-01 18:49:50 +00:00
oliverschmidt	69faf1ff4d	Set sprite color.	2007-12-24 15:01:49 +00:00
oliverschmidt	5592b1df6c	Implement cfs API on preprocessor level using POSIX functions..	2007-12-23 15:29:19 +00:00
oliverschmidt	fda38428d9	Introduced some more high-level config macros.	2007-12-23 13:55:38 +00:00
oliverschmidt	14a8cf7200	Made use of the new high-level config macros.	2007-12-23 12:33:57 +00:00
oliverschmidt	125f261b7d	Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios.	2007-12-23 12:32:43 +00:00
oliverschmidt	0564cc50fd	Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all.	2007-12-21 01:36:01 +00:00
oliverschmidt	fe023c6d3e	Introduced very lightweight log implementation not depending on any file I/O library.	2007-12-21 00:43:57 +00:00
oliverschmidt	c36697fca9	Added target-specifc mouse configuration values.	2007-12-20 22:59:41 +00:00
oliverschmidt	e63610e1c9	Added target-specifc mouse support (sprite handling).	2007-12-20 22:54:22 +00:00
oliverschmidt	ff6622310f	Added target-specifc mouse configuration values.	2007-12-20 22:52:18 +00:00
oliverschmidt	eab988e84d	Added target-specifc ctk (and www) configuration values.	2007-12-20 20:54:15 +00:00
nvt-se	f0891be218	added clear channel assessment timeout. long to begin with.	2007-12-20 14:44:31 +00:00
fros4943	d8f6f03edc	moving radio init to init-net files	2007-12-20 13:43:24 +00:00
fros4943	d0997c2dab	major bugfix: padding synch with zero	2007-12-20 13:36:59 +00:00
nvt-se	abb2731ed7	corrected comparison when bits don't need shifting.	2007-12-20 10:48:01 +00:00
nvt-se	7a6a9e62e4	improved logic.	2007-12-19 13:25:41 +00:00
nvt-se	1f00c20815	state variable must be volatile.	2007-12-19 13:09:01 +00:00
oliverschmidt	70fe24817e	Added target-specifc ctk (and www) configuration values.	2007-12-18 17:51:20 +00:00
nvt-se	b4a8641dda	removed printf's.	2007-12-18 15:27:43 +00:00
nvt-se	f9d24f0d24	Wake up from sleep in the interrupt when the receiver process is going ... to be polled.	2007-12-18 15:26:25 +00:00
fros4943	d21572da02	configurable port	2007-12-18 11:55:01 +00:00
nvt-se	ab115e4b10	Removed deprecated function.	2007-12-17 20:18:29 +00:00
nvt-se	1566f55e04	use smaller payload buffer size and provision for synchronization word in ... the total buffer.	2007-12-17 20:15:53 +00:00
nvt-se	bcefffb0e7	set ev to valid value.	2007-12-17 18:48:50 +00:00
nvt-se	692da8fd47	swapped the currents for lpm and cpu.	2007-12-17 18:47:17 +00:00
nvt-se	004143b6b8	set rxlen to zero before enabling interrupts.	2007-12-17 16:37:15 +00:00
nvt-se	2288cdecbb	small cleanup.	2007-12-17 16:23:32 +00:00
nvt-se	2d5f331b34	new line.	2007-12-17 16:20:34 +00:00
fros4943	479d74ce6a	added receiver process outside interrupt	2007-12-17 15:53:57 +00:00
fros4943	7886d51045	removed old dma_init	2007-12-17 15:47:55 +00:00
fros4943	3936e0c275	updated version	2007-12-17 15:47:40 +00:00
nvt-se	5f1ca4ccdf	use synchronous transmission.	2007-12-17 15:26:47 +00:00
nvt-se	2a0351afb4	improved uip support and cleaned up the source.	2007-12-17 13:33:09 +00:00
nvt-se	86ce511469	Separate files for network initialization.	2007-12-17 13:20:54 +00:00
nifi	babb455dae	More explicit assignment of Rime address from node ID	2007-12-17 13:04:10 +00:00
adamdunkels	381f5dc4cc	Initialize Rime address from hardware MAC address if no node ID has been configured. Be more explicit on how Rime address is assigned from node ID. Set time synch authority level from Rime address rather than node ID. Fix bug that put CPU in LPM2 instead of LPM3.	2007-12-17 12:35:23 +00:00
nifi	f4ddc371e8	changed the way that rime address is set	2007-12-17 12:17:23 +00:00
fros4943	4da695ce72	bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise	2007-12-17 11:23:57 +00:00
nvt-se	6a42706847	removed duplicate.	2007-12-17 11:15:21 +00:00
nvt-se	a305e3ccbb	removed lpm_on.	2007-12-17 11:14:28 +00:00
fros4943	3969ea6f9d	not using usb port to program the msb	2007-12-17 11:10:45 +00:00
oliverschmidt	e991edc24d	Added route handling to the Cygwin build. It is done similiar to the other builds by simply shelling out to 'route'. However the coding isn't placed in the driver but in the netsim node main method - and it is fully parametrized. ... Cygwin doesn't seem to call exit functions on SIGTERM so I needed to go for a signal handler in order to delete the route.	2007-12-17 01:12:09 +00:00
adamdunkels	2b4f33a4dd	Enabled support for CC2420 timestamps	2007-12-16 15:05:04 +00:00
adamdunkels	d13648292e	Added initialization of the time synchronization module	2007-12-16 15:03:35 +00:00
oliverschmidt	8644822a34	Soe we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities.	2007-12-16 13:08:09 +00:00
oliverschmidt	c7a24bf6cf	Soe we're finally bak at reducing the memory footprint be avoiding to pull in large C-library enitities.	2007-12-16 13:07:35 +00:00
oliverschmidt	805f3f87d3	Make the "empty" error_exit implementation the default to be optionally overridden.	2007-12-16 13:05:23 +00:00
oliverschmidt	7b3d0559b3	Minimal reformatting.	2007-12-15 23:02:16 +00:00
oliverschmidt	21e343dc2f	Don't depend on program handler for project builds.	2007-12-15 21:54:54 +00:00
oliverschmidt	0e8649e5ae	Don't override www defaults for project builds.	2007-12-15 21:39:06 +00:00
oliverschmidt	97b1c95005	Activate mouse support for fullscreen mode.	2007-12-15 21:30:56 +00:00
oliverschmidt	9765b76455	Fixed typos.	2007-12-15 20:12:28 +00:00
oliverschmidt	6fd3b0dbae	Removed CTK_CONF_HYPERLINK from shared code as its use is still unclear (and the implementation was incomplete anyway).	2007-12-15 11:34:59 +00:00
oliverschmidt	b32f0643ab	Moved stuff into sys subdir to clean up the apple2enh dir (and because the corresponding shared res. cpu stuff is in the sys dir as well).	2007-12-15 11:04:11 +00:00
oliverschmidt	b89a08be8b	Allow Cygwin based Win32 platform to be used for 'project builds' (in the sense of the Contiki 2.x build system) beside the exsisting 'platform build'.	2007-12-15 00:00:34 +00:00
oliverschmidt	3a3a98fc0f	Made pc-6001 behave as before.	2007-12-14 23:49:14 +00:00
oliverschmidt	4519240466	Made ethernut2 behave as before.	2007-12-14 23:45:56 +00:00
oliverschmidt	7ad283bfe1	Made ethernut1 behave as before.	2007-12-14 23:44:49 +00:00
oliverschmidt	e4e608bd1d	Made gtk behave as before.	2007-12-14 23:40:41 +00:00
fros4943	c028df7ecf	not using mempcy for ack crc	2007-12-13 16:57:31 +00:00
fros4943	afb1cb28d3	initializing rimeaddr from nodeid similar to sky platform (!= esb platform)	2007-12-13 16:11:22 +00:00
nvt-se	54bef4bea3	added back initializations that were missing in the previous commit.	2007-12-13 13:10:02 +00:00
nvt-se	665c58fd2a	Contributions from Michael Baar: ... CC1020 o Turns off only after transmission has ended and not in between o Using events for DMA takes too long. It should use a callback when DMA finishes to turn off the transmit mode as early as possible. Core/UART o Added profiling and energest initialization o Changed low-power mode from LPM1 to LPM3	2007-12-13 12:51:38 +00:00
nvt-se	b1d87bf0d3	Removed deprecated rules.	2007-12-13 11:29:12 +00:00
fros4943	0fc2178857	added queuebuf conf	2007-12-13 08:00:51 +00:00
nvt-se	486ea95b4f	Limited support for energy estimation.	2007-12-10 12:49:08 +00:00
oliverschmidt	70321f690f	Made error_exit() implementation target-specific.	2007-12-08 22:16:43 +00:00
oliverschmidt	fec41a0f44	Clarify that the driver support RR-Net only on RR as other carts tend to differ in clockport activation.	2007-12-08 21:07:34 +00:00
oliverschmidt	32ae3317a6	Several minor changes and reformatting.	2007-12-06 22:09:56 +00:00
oliverschmidt	88136ca271	Added ETH64.	2007-11-30 12:39:34 +00:00
oliverschmidt	026ba0801f	Added LANceGS.	2007-11-30 12:35:18 +00:00
adamdunkels	f9fdafd858	Removed unused vnc client	2007-11-29 07:56:46 +00:00
fros4943	3bfa34f4c3	removed the symbols dummy target	2007-11-29 04:57:04 +00:00
adamdunkels	b2f030897c	Removed unused file rom.c	2007-11-28 23:31:53 +00:00
adamdunkels	be300d6765	Removed inclusion of unused file cxmac.h	2007-11-28 23:28:35 +00:00
nifi	867f87d35a	removed local watchdog (conflicts with cpu/msp430/watchdog.c)	2007-11-28 22:04:56 +00:00
nifi	c40a2071f0	changed to use radio_sensor directly instead of a variable depending on interrupts	2007-11-28 21:28:03 +00:00
nifi	377ad07d77	return the last decoded value instead of the last value read during an interrupt	2007-11-28 21:26:35 +00:00
nifi	0b44c75e94	added compiler error when compiled without nodeid=<the ID of the node>	2007-11-28 19:53:09 +00:00
oliverschmidt	d6deb82df8	Fixed typo.	2007-11-28 17:57:52 +00:00
oliverschmidt	2bec16e07d	Added some info on the apple2enh plattform.	2007-11-28 17:55:43 +00:00
oliverschmidt	bb5c0b3c73	Added some info on the c64 plattform.	2007-11-28 17:55:11 +00:00
oliverschmidt	171c84a9d9	Added some info on the win32 platform.	2007-11-28 17:12:11 +00:00
adamdunkels	f21225eb1c	More reasonable current draw numbers + multiply by voltage	2007-11-28 17:06:55 +00:00
oliverschmidt	2e1b1acfaa	Now that there's a Cygwin based build there's no more need to drive people to use Visual Studio - if they aren't already experienced and want to use it.	2007-11-28 16:51:17 +00:00
oliverschmidt	75c49f8d7b	Added CTK_CONF_HYPERLINK in order to keep them ;-))	2007-11-28 16:41:35 +00:00
adamdunkels	8a6309aa45	Changed UIP_UDP -> UIP_CONF_UDP	2007-11-28 15:32:25 +00:00
adamdunkels	40d9045a2d	Moved energy estimation initialization before starting processes so that processes may turn things on and off without messing up the energy estimates	2007-11-28 14:45:22 +00:00
adamdunkels	d6c597cf0b	Added missing sys/select.h include	2007-11-28 14:16:12 +00:00
nvt-se	4a5ad23ff4	Make it compile on Linux. tz isn't used anyway.	2007-11-28 13:01:02 +00:00
adamdunkels	a725de0f79	Reimplemented waiting with select() instead of nanosleep(). Let's see if Linux compiles this code now...	2007-11-28 12:54:41 +00:00
matsutsuka	9f753bf737	network configuration has been modified for appropriate compilation	2007-11-28 10:11:55 +00:00
matsutsuka	16f9b124c4	a minor glitch (apps setting) has been fixed	2007-11-28 10:03:40 +00:00
matsutsuka	5318ab9e2e	Additional support for main files.	2007-11-28 09:44:27 +00:00
matsutsuka	825c793b92	Several configuration variables have been added to support loader and applications	2007-11-28 09:44:03 +00:00
matsutsuka	b00156d9b0	Makefiles are entirely reformed to make configuration easier.	2007-11-28 09:43:01 +00:00
matsutsuka	5682272b78	Platform specific loader, which is yet supported.	2007-11-28 09:41:41 +00:00
matsutsuka	04af453e72	Special version of web server that consumes less memory.	2007-11-28 09:40:13 +00:00
matsutsuka	2555d7fdf0	Added experimental logging support for debug.	2007-11-28 09:39:30 +00:00
matsutsuka	e1456c5522	Some changes have been applied to support various CTK configurations.	2007-11-28 09:38:21 +00:00
matsutsuka	5d1aaa4fe8	CTK has been changed.	2007-11-28 09:37:11 +00:00
matsutsuka	874217b5b7	initialization added	2007-11-28 06:15:19 +00:00
matsutsuka	c1f7c16f7d	Network client (simpletelnet)	2007-11-28 06:14:11 +00:00
oliverschmidt	bcfc99fa5b	Limit the maximum number of simultaneous connections to the cfs webserver to the maximum number of open files.	2007-11-28 00:00:29 +00:00
oliverschmidt	a91fe3ea98	Limit the maximum number of simultaneous connections to the cfs webserver to three because there's not enough memory left on the heap for more open files anyway - ProDOS 8 needs 1kB of page-aligned heap per open file :-(	2007-11-27 22:03:29 +00:00
oliverschmidt	963cc8b31e	Made use of config file read function.	2007-11-27 21:50:19 +00:00
oliverschmidt	0d8d5c7c5c	Added (default) binary config file.	2007-11-27 21:46:35 +00:00
nvt-se	34ebd14ec7	Removed usleep and moved the pseudo-random factor to nanosleep's argument.	2007-11-27 20:45:15 +00:00
adamdunkels	90c13c2603	Added time.h include to get nanosleep to compile	2007-11-27 20:32:08 +00:00
oliverschmidt	ef55496de0	Use common log implementation for cc65 targets.	2007-11-27 16:50:02 +00:00
oliverschmidt	380407ae5a	Reduced stacksize.	2007-11-27 12:24:03 +00:00
adamdunkels	4eae027dd3	Changed usleep() to nanosleep()	2007-11-26 23:28:33 +00:00
oliverschmidt	953212e297	Set the maximum number of simultaneous connections to the cfs webserver to the maximum number of uIP connections.	2007-11-26 21:52:26 +00:00
oliverschmidt	f779a8cdff	Set the maximum number of simultaneous connections to the cgi webserver to the maximum number of uIP connections.	2007-11-26 21:38:32 +00:00
nifi	cc51c0220b	changed NETWORKDRIVERS to shorter NETSTACK	2007-11-26 19:35:06 +00:00
nifi	fa5a20f948	added ctimer init + printout of the autostarted processes	2007-11-26 19:34:23 +00:00
fros4943	06ce414c56	updated bad file info	2007-11-25 22:48:35 +00:00
fros4943	d6f46bfcaa	minor fix for SYMBOLS	2007-11-25 22:47:43 +00:00
fros4943	8aac8cde97	removed unused old stuff ... + introduced COOJA definition	2007-11-25 22:47:18 +00:00
fros4943	014c6c82e1	moved test applications from platform root to separate directory	2007-11-25 22:45:56 +00:00
fros4943	6f862c4506	removed warnings	2007-11-25 22:45:04 +00:00
fros4943	4436819336	updated interface	2007-11-25 22:44:06 +00:00
oliverschmidt	9c5f62d361	Switched to lowercase file name and do consistently "first-log then operate".	2007-11-25 22:21:19 +00:00
oliverschmidt	0df5958e16	Do consistently "first-log then operate".	2007-11-25 22:19:49 +00:00
oliverschmidt	3027f98b80	Switched to lowercase file name to allow for successful driver loading from C64 DOS file system.	2007-11-25 22:16:59 +00:00
oliverschmidt	74c4e10f23	No reason to not just compile petsciiconv.c for all cc65 targets.	2007-11-25 21:43:55 +00:00
oliverschmidt	f302b5e731	Activated PETSCII support on the C64.	2007-11-25 17:12:45 +00:00
oliverschmidt	b26ff75aad	Added user feedback on Ethernet configuration.	2007-11-25 15:15:05 +00:00
oliverschmidt	20d395e9b6	Added user feedback on IP configuration.	2007-11-25 15:00:32 +00:00
oliverschmidt	45c836c289	Adjusted dummy return value to (new) cfs interface.	2007-11-24 21:29:07 +00:00
oliverschmidt	0eb7106bd2	Include dummy for posix function missing in cc65 C-library.	2007-11-24 13:02:27 +00:00
oliverschmidt	0ed29ca43f	Include dummies for posix functions missing in cc65 C-library.	2007-11-24 13:00:27 +00:00
oliverschmidt	e5f7fc8594	Made cfs implementation adhere to (new) cfs interface and streamlined implementation.	2007-11-22 12:03:54 +00:00
nifi	d16836d9bb	changed to show Contiki version, node id, and autostarted processes at startup	2007-11-21 16:41:44 +00:00
oliverschmidt	645be6acbc	Made use of the generic Ethernet driver for cc65 targets.	2007-11-20 22:24:03 +00:00
oliverschmidt	7c1cbd4ee2	Added speed detection user feedback and adjusted soft clock to ethernet polling.	2007-11-20 21:54:06 +00:00
oliverschmidt	8ebc56aad5	Shortened welcome message.	2007-11-20 21:24:25 +00:00
oliverschmidt	aa7dd83d5d	Made use of the generic Ethernet driver for cc65 targets.	2007-11-20 21:19:12 +00:00
adamdunkels	a1f11ff8e7	Removed includes for stuff that has been moved to the backyard. Added <stdint.h> include	2007-11-19 12:23:02 +00:00
adamdunkels	477d39ce5b	Fixed function prototypes to match radio API	2007-11-19 09:50:54 +00:00
oliverschmidt	1c0aa8a0e4	Source reformatting only.	2007-11-18 13:24:34 +00:00
nvt-se	46b6ce9193	Conform to the radio_driver interface.	2007-11-18 12:25:22 +00:00
adamdunkels	58d442ab2f	Removed buggy button.c that is and should not be used	2007-11-18 12:02:49 +00:00
oliverschmidt	12c6074a75	Moved logically empty files to backyard.	2007-11-18 02:39:10 +00:00
oliverschmidt	c1e1249bc2	Removed compiler warnings.	2007-11-18 02:36:07 +00:00
oliverschmidt	6ab83029c3	Source reformatting only.	2007-11-18 02:17:33 +00:00
oliverschmidt	86a745f923	Removed compiler warnings.	2007-11-18 02:16:57 +00:00
oliverschmidt	d11e1e6fd2	Removed reference to logically empty file.	2007-11-18 01:13:56 +00:00
oliverschmidt	6d6edb418b	Declare strcasecmp here as it isn't part of C99.	2007-11-18 00:55:19 +00:00
oliverschmidt	f52ae57d99	Declare strcasecmp here as it isn't part of C99.	2007-11-18 00:46:26 +00:00
oliverschmidt	90edc773b0	Introduced C99 sized int types.	2007-11-17 22:40:33 +00:00
oliverschmidt	062e2a1ce4	Removed compiler warning.	2007-11-17 20:13:54 +00:00
adamdunkels	d6dc8763e9	Fixed dereference of void * pointer	2007-11-17 18:28:23 +00:00
adamdunkels	66b5644e07	Fixed compiler warnings to make code compile with gcc's -pedantic switch	2007-11-17 18:26:06 +00:00
adamdunkels	1e1e44a3f8	Fixed compiler warnings to make code compile with gcc's -pedantic switch	2007-11-17 18:01:00 +00:00
adamdunkels	d9eebf7e17	Fixed compiler warnings	2007-11-17 10:46:25 +00:00
adamdunkels	ff45f9d2c4	Added watchdog support	2007-11-17 10:29:33 +00:00
fros4943	79c38ef8df	minor updates in cooja cfs_ram	2007-11-16 09:21:49 +00:00
nifi	a6d827fa1f	moved initialization of ctimer to allow MAC layer to use ctimers	2007-11-15 13:07:42 +00:00
nvt-se	33e565d20a	Removed unused variables. ... Initialize header.	2007-11-14 11:17:30 +00:00
adamdunkels	f1271464fd	Turned on energy estimation and profiling by default	2007-11-13 21:10:50 +00:00
adamdunkels	2140576ac9	Added battery-sensor.c	2007-11-13 20:37:18 +00:00
adamdunkels	d34f8e0dcc	Preliminary untested code for the internal MSP430 battery sensor	2007-11-13 20:29:07 +00:00
nvt-se	c90a758ac5	Detect if the medium is busy right before sending.	2007-11-12 21:17:47 +00:00
adamdunkels	b51977a693	Added Doxygen documentation	2007-11-10 20:45:29 +00:00
adamdunkels	ca6abb286b	Added LEDs notification. THe program won't compile without a nodeid=XXX now	2007-11-10 20:45:00 +00:00
adamdunkels	d5430dc4dc	Added better boot-up behaviour of the LEDs - they can now be used to determine where in the boot sequence the node hangs (if it hangs)	2007-11-10 20:44:30 +00:00
nvt-se	0e4429068b	Added a carrier sensing function.	2007-11-07 15:34:41 +00:00
nvt-se	ee59f1fe34	Use a fresh RSSI value in the read function.	2007-11-07 15:26:00 +00:00
nvt-se	a604013a88	Added more flags for the status register.	2007-11-07 15:23:35 +00:00
adamdunkels	0ce1708c76	#ifdef around RF_CHANNEL	2007-11-06 20:28:09 +00:00
nvt-se	366d845336	DMA destination is now given as a parameter instead of being hardwired.	2007-11-06 15:08:55 +00:00
nvt-se	dc8b6e7dcd	Removed some unused headers and definitions.	2007-11-06 14:48:18 +00:00
nvt-se	882f340f17	Use a counter for the test so lost packets are spotted easily.	2007-11-06 14:44:42 +00:00
joxe	1d447dc043	added button sensing and leds-blinking for better sensor demo	2007-10-26 12:37:48 +00:00
adamdunkels	dd8469ee4a	Added inclusion of Tmote Sky bulk upload makefile	2007-10-25 13:28:15 +00:00
adamdunkels	d2f90802de	Compile profiling support only if PROFILE_CONF_ON is defined	2007-10-25 10:21:48 +00:00
adamdunkels	a9e4287cbe	Changed the energy estimation type ENERGEST_TYPE_RECEIVE to ENERGEST_TYPE_LISTEN to highlight that energy is spent on idle listening, not just the actual reception of packets	2007-10-25 09:30:39 +00:00
zhitao	ff006a5103	keep in synch with the Rime abstraction	2007-10-25 08:26:49 +00:00
nvt-se	e7dc3ec422	Initialize ctimer.	2007-10-24 13:47:50 +00:00
adamdunkels	910c9ea161	Added profiling support, made rime/mac initialization nicer	2007-10-23 21:29:40 +00:00
fros4943	7512df3f7b	removed bad memcpy:s	2007-10-23 12:16:13 +00:00
nifi	217056b8bd	sht11 architecture support for Sky	2007-10-23 08:53:50 +00:00
fros4943	28ddccef19	added missing function declarations	2007-10-22 13:08:13 +00:00
nvt-se	e57310c0b3	Removed duplicated statement.	2007-10-22 13:07:00 +00:00
nvt-se	06f923e502	Simple test for the SHT11 driver.	2007-10-22 13:05:30 +00:00
nvt-se	91b79de654	Use sht11 driver.	2007-10-22 12:21:20 +00:00
nvt-se	045225fa05	Made driver less platform-dependent and added support for msb-430.	2007-10-22 12:19:58 +00:00
nvt-se	0c9db3caa3	Moved to core/dev.	2007-10-22 12:19:31 +00:00
nvt-se	406cc6d5a8	Set channel to RF_CHANNEL after simple_cc2420_init. ... Otherwise the init function would reset the channel to 11.	2007-10-12 12:47:32 +00:00
nvt-se	2d0225b0e4	Safeguard for invalid packets.	2007-10-04 10:02:08 +00:00
nvt-se	fb9b800c53	More clear power down procedure. Now it is required that cc1020_on ... is called before anyone can send after the power down.	2007-10-02 14:05:45 +00:00
nvt-se	4e8bdb1c08	Power managment is handled by another layer.	2007-10-01 11:59:36 +00:00
nvt-se	c0686e80f1	Added definitions for the MAIN register.	2007-10-01 11:56:49 +00:00
matsutsuka	d6ec25e37c	The libconio_arch-small is architecture-depend implementation of console I/O with minimum size for the server mode.	2007-09-30 12:46:34 +00:00
matsutsuka	c2472ff0f1	contiki-main file for network client support.	2007-09-29 04:13:14 +00:00
matsutsuka	4381f4b964	Platform-depend CTK support is modified to minimize size of module.	2007-09-29 04:10:00 +00:00
matsutsuka	9e1e31f3bb	Makefiles have been modified to support customized crt0.	2007-09-29 04:07:00 +00:00
matsutsuka	c3d13b6dd4	Configuration file now supports: ... - telnet window size - UIP configuration - new rs232 driver	2007-09-29 04:05:20 +00:00
fros4943	87e32f037e	enabled config of entire ar command, not only arguments	2007-09-28 07:21:21 +00:00
nvt-se	b72c228379	* Enable rtimers. ... * Specify port direction first.	2007-09-21 14:53:36 +00:00
nvt-se	24ffa8cfaf	support third DMA line.	2007-09-21 13:51:09 +00:00
nifi	9d75d6d153	enabled inline functions	2007-09-19 14:09:31 +00:00
matsutsuka	c99b7dc827	status has been added for polling function.	2007-09-19 12:47:19 +00:00
matsutsuka	8d7bb2119c	Architecture-depend CTK implmeentation has been all rewritten by assembler for performance and memory reasons.	2007-09-19 12:46:15 +00:00
matsutsuka	b2a6d163fc	configuration for serial has been changed.	2007-09-19 12:44:45 +00:00
nvt-se	bbecdd9c34	removed uncommented line.	2007-09-14 19:27:22 +00:00
nvt-se	87018b2af5	use uint16_t to be specific about id type size.	2007-09-14 19:24:45 +00:00
nvt-se	5e7a435959	do not declare msp430_cpu_init here.	2007-09-14 19:24:07 +00:00
nvt-se	6955e028da	Use splhigh and splx.	2007-09-14 19:20:54 +00:00
nvt-se	290f41db06	better comments. ... enable interrupt later.	2007-09-14 19:20:24 +00:00
nvt-se	ca733ddfce	Added some statistics.	2007-09-14 19:14:54 +00:00
nvt-se	928c22eda1	Minor refactoring and improved compliance with the radio interface.	2007-09-14 18:51:51 +00:00
matsutsuka	71e5298d90	Process "kill" is properly implemented.	2007-09-11 12:55:57 +00:00
matsutsuka	661476ad92	PC-6001mkII setting is added.	2007-09-11 12:55:35 +00:00
matsutsuka	809b23fe28	Configuration of regular ctk-conio.c has been added.	2007-09-11 12:55:16 +00:00
matsutsuka	6dd93a3d04	NEC PC-6001 support sources are initially added.	2007-09-11 12:12:59 +00:00
fros4943	db74bb6566	changed link argument sent to makefile: ... instead of using linker, user may specify linker line including tools	2007-09-05 14:00:59 +00:00
oliverschmidt	89e81f9eed	Renamed 6502-conf.h into 6502def.h to be in line with similiar files created in the meanwhile and added C99 names.	2007-09-05 10:59:10 +00:00
ksb	6441821fc3	Forgot to add this file	2007-09-01 11:17:25 +00:00
ksb	73dfa52324	Changes IP address so it won't collide with the Tmote.	2007-09-01 10:09:11 +00:00
ksb	2bbf074f39	Added a gateway application the routes between SLIP on USB and the radio.	2007-09-01 10:06:05 +00:00
fros4943	974fcb66d4	convenience function for cooja. ... converts printf()'s to log_message()'s	2007-08-23 08:14:30 +00:00
fros4943	6d86b77cfe	setting rime id at init	2007-08-23 07:35:26 +00:00
fros4943	d272b062f0	reimplemented receiver calls (earlier tcpip_input) from inside multithreaded environment	2007-08-21 13:09:40 +00:00
ksb	e55dbe433b	Build system improvements.	2007-08-21 09:06:23 +00:00
nvt-se	186a99857b	minor adjustments for ip.	2007-08-20 11:39:03 +00:00
nvt-se	81174c6389	cr->lf	2007-08-20 11:01:13 +00:00
nvt-se	aee4c71200	Use test-abc instead of core.	2007-08-17 13:10:16 +00:00
nvt-se	6dffb0ed63	unnecessary file.	2007-08-17 13:08:38 +00:00
nvt-se	96e06d1dde	Standardized integer types. ... Removed unecessary volatility. Make sure that the random back-off is only if the channel is busy.	2007-08-16 20:38:40 +00:00
nvt-se	defbe1d9ac	use new function.	2007-08-16 20:29:56 +00:00
nvt-se	9017949535	Improved interface and C standard compatibility.	2007-08-16 20:29:18 +00:00
nvt-se	6983417307	forgot return.	2007-08-16 17:10:49 +00:00
nvt-se	8b3e9477d9	call dma_init.	2007-08-16 13:54:58 +00:00
nvt-se	d5027f0041	Subscribe to DMA events on line 0 for the radio.	2007-08-16 13:52:17 +00:00
nvt-se	0723f1fbc7	Make it possible to subscribe to DMA events.	2007-08-16 13:51:57 +00:00
nifi	2780aef873	Include msp430def.h for standard defines	2007-08-16 13:35:33 +00:00
nvt-se	fefe56d913	Changes to standard types.	2007-08-16 13:24:57 +00:00
bg-	f398e56048	* Include avrdef.h for standard defines. ... * Define AODV_COMPLIANCE.	2007-08-16 13:24:20 +00:00
nvt-se	5db2990884	Use the new type definitions file for msp430.	2007-08-16 13:23:41 +00:00
bg-	a20c9e6abb	* Include msp430def.h for standard defines. ... * Remove obsolete LPM_CONF_OFF definition.	2007-08-16 13:10:53 +00:00
oliverschmidt	c42cbe3141	Added a naive clock implementation based on main loop counting for the Apple2 as it doesn't have a hardware clock.	2007-08-10 13:30:02 +00:00
nifi	296ad6cdb7	Updated to new radio_driver API	2007-08-07 11:20:11 +00:00
nifi	7e57cd240a	Updated to new radio_driver and mac_driver APIs	2007-08-07 11:17:54 +00:00
nifi	cc80dbf546	removed obsolete rime code for tr1001	2007-08-07 11:16:19 +00:00
nifi	d74d8d176d	Updated to new radio_driver API, removed obsolete rime code	2007-08-07 11:14:39 +00:00
nifi	fb54bba19e	Updated to new radio_driver API + LPM4_EXIT instead of LPM_AWAKE()	2007-08-07 11:11:19 +00:00
nifi	39c12bad29	Added stdint.h	2007-08-07 11:09:38 +00:00
nifi	6b2cd5c2d4	LPM4_EXIT instead of LPM_AWAKE()	2007-08-07 11:06:14 +00:00
nvt-se	199e6bd270	Use stdint.h	2007-08-06 12:20:46 +00:00
nvt-se	016778b29e	Removed redundant text.	2007-08-02 08:58:38 +00:00
nvt-se	6139885c51	Awake in order to let event processing occur immediately.	2007-08-02 08:57:58 +00:00
nvt-se	a6af72d129	Style changes.	2007-08-02 08:17:43 +00:00
nvt-se	0412975efd	Uncommented radio init line. ... Added informative output.	2007-08-02 08:14:00 +00:00
nvt-se	a6dba97b84	Erase only main flash memory.	2007-08-02 08:13:20 +00:00
nvt-se	709adf51ad	Contributions from Michael Baar: ... # msb430\dev\cc1020.c Data type problem in the calibration function, therefore looping 10 seconds on boot. Fixed. # msb430\contiki-msb430-main.c Directly accessed power management while other modules used the Contiki layer resulting in the node sleeping most of the time. Fixed. Added uIP support. # msb430\buildscripts\makefile.win Changed to erase only main-memory but keep infomemory so the node configuration is not erashed during flashing.	2007-07-31 07:54:44 +00:00
fros4943	1a021bbfc3	random ack time	2007-07-26 13:22:01 +00:00
fros4943	d80efeb8ed	defining uip cache size	2007-07-20 15:21:56 +00:00
fros4943	3768b44804	updated uip uaodv radio driver	2007-07-17 23:02:21 +00:00
fros4943	55443a148a	storing ack destination + removed header compression	2007-07-16 07:40:55 +00:00
fros4943	c50b7cc7ee	unicast packets being acknowledged	2007-07-11 15:23:42 +00:00
nvt-se	836eae63cb	Improvement batch.	2007-07-05 08:35:13 +00:00
nvt-se	eb7f7ba65b	Some more cleaning up.	2007-06-28 18:27:45 +00:00
nvt-se	268766e890	dma transfer support.	2007-06-28 14:41:17 +00:00
nvt-se	ff04b5e153	cleaned file.	2007-06-28 14:07:02 +00:00
nvt-se	b88e6642bd	Removed unnecessary things.	2007-06-28 13:47:28 +00:00
nvt-se	d7c489f0b2	jtag support.	2007-06-28 13:43:24 +00:00
nvt-se	ff3e2b8bd8	From the ESB port.	2007-06-28 12:54:05 +00:00
nvt-se	ae2e9f3677	Platform-specific devices.	2007-06-28 12:52:41 +00:00
nvt-se	792056e325	Test applications.	2007-06-28 12:51:31 +00:00
nvt-se	365f99e5c8	Scatterweb MSB430 port.	2007-06-28 12:49:57 +00:00
fros4943	78a06fe9b5	using nullmac for cooja rime radio	2007-06-08 12:25:54 +00:00
bg-	0e515a5472	* Initialise rand package.	2007-06-04 18:09:14 +00:00
nifi	c4421c1d4b	added Makefile option for choosing between rime and uip	2007-06-01 12:46:07 +00:00
bg-	2e7c6b59fb	* The sources for crtk.o and service.o have been retired.	2007-05-31 14:26:58 +00:00
oliverschmidt	bc46e8a49e	Removed clock stuff from main file.	2007-05-29 22:02:37 +00:00
fros4943	7ec1a4f7aa	added check that outgoing packet was not discarded from simulator	2007-05-29 12:53:49 +00:00
fros4943	6aafd5582d	removed old radio-arch.* (was earlier renamed to cooja-radio)	2007-05-29 12:27:00 +00:00
fros4943	d6d34b33a5	aodv setting	2007-05-29 09:13:37 +00:00
bg-	ceb423c007	* Add sht11_off.	2007-05-28 16:24:58 +00:00
fros4943	da3b1ab813	make sure mote doesn't fall asleep while radio is transmitting/receiving	2007-05-28 15:47:07 +00:00
oliverschmidt	24f6cf175d	Start out with minimal main().	2007-05-27 21:11:08 +00:00
oliverschmidt	f0e3996e07	For now delegate all work to the 6502 makefile.	2007-05-27 21:00:59 +00:00
oliverschmidt	99fdfbb6d8	Start out with default linker config.	2007-05-27 20:56:36 +00:00
oliverschmidt	3a1de93851	Start out with minimal Contiki config.	2007-05-27 20:54:13 +00:00
oliverschmidt	0cd5f4fa0a	Reduced Contiki config to the minimum.	2007-05-27 20:52:42 +00:00
oliverschmidt	793d71f65d	Originally left this file alone as I thought it might help on consolidating with cpu/native/net/tapdev.c but actually is doesn't contain unique content so it can be removed now as well.	2007-05-27 08:54:36 +00:00
oliverschmidt	e7bc74a9d0	Changed packet drivers from services to plain processes. ... Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup. Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.	2007-05-26 23:12:56 +00:00
oliverschmidt	75f04995a9	Changed packet drivers from services to plain processes. ... Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup. Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.	2007-05-26 23:05:36 +00:00
oliverschmidt	fa3819ed1c	Moved ninimal-ppp into backyard as it depends on the uIP ppp support.	2007-05-26 07:20:07 +00:00
adamdunkels	be2a7e954c	Added initialization of MAC and Rime	2007-05-25 08:08:36 +00:00
adamdunkels	ca356ea2e2	Added CC2420 driver	2007-05-25 08:08:21 +00:00
oliverschmidt	e54fb521e2	The Visual C++ project file is the first to go without service.c .	2007-05-23 23:42:42 +00:00
oliverschmidt	934fa73d29	Moved all existing C64 stuff into new secondary directory tree.	2007-05-23 22:36:05 +00:00
oliverschmidt	a300c31d7e	Removed explicit shut down of network driver as it easily results in endless recursions on errors while network driver initialisation.	2007-05-23 22:01:14 +00:00
oliverschmidt	2e1ac205e2	Avoid compiler warnings.	2007-05-22 21:33:31 +00:00
oliverschmidt	e867c6afcb	Explicitly shut down network driver.	2007-05-22 21:27:55 +00:00
oliverschmidt	a7dba4cc4f	Explicitly shut down network driver.	2007-05-22 21:19:34 +00:00
adamdunkels	dab63c4c6b	Added energy estimation, leds instead of minileds to be able to do energy estimation on leds	2007-05-22 21:16:37 +00:00
adamdunkels	8811fe23fd	Added sht11, energy estimation, xmac, diabled uIP (for now)	2007-05-22 21:13:26 +00:00
adamdunkels	1f835946ca	Added X-MAC configuration, reduced ELF loader text memory size	2007-05-22 21:12:15 +00:00
adamdunkels	81dfaf575c	Updated API	2007-05-22 21:09:19 +00:00
adamdunkels	6357c240c0	Added rtimer, ethernode rime initialization	2007-05-22 21:08:57 +00:00
adamdunkels	a473b6ff33	Made TR1001 work with Rime	2007-05-22 21:08:24 +00:00
adamdunkels	f33844bd9c	Added energy estimation	2007-05-22 21:07:51 +00:00
adamdunkels	b32a9b9be5	Returning the actual value rather than something read during an interrupt	2007-05-22 21:06:57 +00:00
adamdunkels	de4ef02e49	Added energy estimation, size of queue buffers to two.	2007-05-22 21:06:30 +00:00
adamdunkels	42e84048f6	Added energy estimation, low power mode	2007-05-22 21:05:53 +00:00
adamdunkels	770632e079	Removed redundant file	2007-05-22 20:49:39 +00:00
fros4943	cbc6f57f34	removed old cfs.c	2007-05-21 14:57:47 +00:00
fros4943	166ff3a4a0	new includes	2007-05-21 14:52:15 +00:00
bg-	d273319641	* Contiki names for integer types.	2007-05-21 14:51:32 +00:00
bg-	e83221cdab	* Compiler option -mno-tablejump should not be default.	2007-05-21 14:30:52 +00:00
bg-	95d95a63ac	* s/uip-fw-service/uip-fw-drv/	2007-05-21 14:22:05 +00:00
bg-	a3f5123c44	* s/uip-fw-service/uip-fw-drv/	2007-05-21 14:21:07 +00:00
bg-	be3d5e8394	* s/uip-fw-service/uip-fw-drv/	2007-05-21 14:13:04 +00:00
oliverschmidt	a22d2ecfef	Changed packet drivers from services to plain processes. ... Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup. Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.	2007-05-20 21:41:31 +00:00
oliverschmidt	5f3296e943	Changed packet drivers from services to plain processes. ... Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup. Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.	2007-05-20 21:29:39 +00:00
oliverschmidt	61f54204d7	Improved map file naming consistency.	2007-05-19 21:46:43 +00:00
oliverschmidt	0e023b328a	Changed Contiki File System (cfs) from a service to a plain library. ... This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.	2007-05-19 21:37:54 +00:00
oliverschmidt	d4528e427f	Changed Contiki File System (cfs) from a service to a plain library. ... This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.	2007-05-19 21:16:08 +00:00
oliverschmidt	9f97290665	Changed Contiki File System (cfs) from a service to a plain library. ... This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.	2007-05-19 21:05:48 +00:00
fros4943	8d6cd6a5b5	dummy mtarch	2007-05-19 14:47:17 +00:00
fros4943	841cbd1b99	uIP over uAODV simple radio driver	2007-05-19 14:25:43 +00:00
oliverschmidt	1e372f13c6	Added new include directory to VC++ project files.	2007-05-19 13:38:25 +00:00
oliverschmidt	eaff19200b	Added new header file to VC++ project file.	2007-05-19 13:37:16 +00:00
oliverschmidt	ae2073cac9	Factored out setup directory search path for source files into Makefile.include. ... - All compilers used support the -I option for setting an include search directory. - The Contiki source tree follows the (common) approach of placing declarations (in headerf iles) in the same directory as definitions (in source files). As a result it makes sense to use the -I compiler option for just the same set of directories used for the vpath gnumake directive. Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.	2007-05-19 07:54:53 +00:00
fros4943	41adb8caf3	radio_sstrength returns last received packet instead of current value ... radio_current_sstrength returns current value	2007-05-18 15:20:20 +00:00
fros4943	8ef1b90a10	removed radio sources from makefile ... (thrown during compilation instead)	2007-05-18 13:51:04 +00:00
fros4943	2e11cfcdeb	removed compiler warning	2007-05-18 13:50:08 +00:00
fros4943	afe66ed534	cooja radio driver (uip + rime)	2007-05-18 13:49:49 +00:00
fros4943	63c7300388	cooja's init-net for uip and rime	2007-05-18 13:49:15 +00:00
fros4943	643ce5adfe	added support for several contiki comm stacks (uip + rime)	2007-05-18 13:45:19 +00:00
fros4943	5b3923141f	added buffer overflow check	2007-05-15 18:13:32 +00:00
fros4943	2f29a448dd	radio_sstrength returns the signal strength of last packet received (instead of uninteresting current value)	2007-05-15 14:39:52 +00:00
adamdunkels	71573a4968	Added sht11 driver, energy estimation. Removed IP/SLIP support for now	2007-05-15 08:11:59 +00:00
adamdunkels	459d91512a	Added rtimer initialization	2007-05-15 08:11:33 +00:00
adamdunkels	d9a4c02fab	Platform-specific energy estimation code	2007-05-15 07:42:22 +00:00
oliverschmidt	237b1617b5	Factored out setup directory search path for source files into Makefile.include. ... - Search target specific directories before CPU specific directories. - Search CPU specific directories before generic directories. Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.	2007-05-13 08:41:11 +00:00
oliverschmidt	4fd1e3ece0	Added signed 32 bit data type.	2007-05-12 20:58:12 +00:00
nifi	4601d620b9	network setup for uip without slip	2007-05-09 15:13:01 +00:00
bg-	07d885ff2b	* Add cle_avr.o	2007-04-26 13:40:26 +00:00
bg-	242f8085be	* Add cle_msp430.o	2007-04-26 13:39:52 +00:00
bg-	cf14e47a0f	* Also include dynamic loader (tcp_loader.o).	2007-04-26 12:55:46 +00:00
bg-	8754cbd4cd	* Use mknmlist-ansi and sym.o.	2007-04-25 15:49:43 +00:00
fros4943	da3d423233	support for sending several packets fast	2007-04-23 08:46:35 +00:00
oliverschmidt	42d0fe9c18	Very minor beautification.	2007-04-21 22:17:22 +00:00
oliverschmidt	3b7c27b9e9	Use generally lowercase names for functin variables.	2007-04-21 15:11:21 +00:00
oliverschmidt	dba1672323	Make use of __inline (just as making use of __fastcall) in order to check that CC_CONF_INLINE (just as CC_CONF_FASTCALL) are used in a syntactically correct manner.	2007-04-18 21:36:44 +00:00
oliverschmidt	33eeb8ccbb	- Switched from from a CTK draw service to a statically linked CTK draw implementation. ... - Workarounded the following CTK glitch: ctk.c calls ctk_arch_keyavail() and ctk_arch_getkey() and needs therefore appropriate declarations (or macros) but it doesn't include a ctk_arch.h or alike to bring those in. So it's necessary to bring those declarations in via contiki-conf.h. But ctk_arch_getkey() is supposed to return a ctk_arch_key_t - and this typedef'ed in ctk.h which means that ctk.h would need to be included in contiki-conf.h before declaring ctk_arch_getkey(). This IS rather undesirable so the current workaround is to declare ctk_arch_getkey() as returning a char - this is btw done similiar in platform/gtk as well. See ctk/ctk-gtksim.h: guint ctk_arch_getkey(void);	2007-04-15 13:30:16 +00:00
oliverschmidt	f16d041476	Provided a meaningful clock_time() implementation - which btw. makes the Cygwin variant finally work :-)	2007-04-14 23:23:15 +00:00
oliverschmidt	3a8fb3ad9f	Initializing the console Just-In-Time on CTK startup and starting up the WinPcap before CTK allows WinPcap to print initialization errors (especially a missing command line arg) without clearing the shell output.	2007-04-14 14:57:19 +00:00
oliverschmidt	c1b0a3f0d3	Cygin (in opposite to VC++) doesn't call exit() - and thus our atexit function - on Ctrl-C. Therefore we install an explict ConsoleCtrlHandler which calls exit(). For the sake of simplicity it's not #ifdef'ed _CYGWIN_.	2007-04-14 14:28:19 +00:00
oliverschmidt	8f0753c402	Link in and start the POSIX file system to make the telnet-server example 'ls' command generally work. Typically it will complain about not finding 'cfs-root/.'	2007-04-13 23:08:52 +00:00
oliverschmidt	766878f5c9	Added the shell server to the Win32 platform.	2007-04-13 21:55:55 +00:00
oliverschmidt	59c2158274	Removed minor redundancy.	2007-04-13 21:47:09 +00:00
oliverschmidt	7aae71934d	Providing a dummy program_handler_load() made made the telnet server work without program-handler but on the other hand incompatible with an exsistng program handler :-( ... Therefore I replaced that hack with a clean CONF macro, which by the way really removes the run() and exec() functionality instead of just implementing it empty.	2007-04-13 21:04:52 +00:00
bg-	87971c35db	* Bump maximum number of udp sockets to 16 and fwcache size. ... * Remove unused stuff.	2007-04-11 15:24:39 +00:00
bg-	b32db9763e	* Bump maximum number of udp sockets to 16. ... * Remove unused stuff.	2007-04-11 15:22:05 +00:00
fros4943	f2f5ea682b	added empty rtimer files to remove compilation errors ... OBS: not implemented yet; rtimer does not work with COOJA	2007-04-11 12:46:13 +00:00
bg-	738a970660	* Also print channel number.	2007-04-11 10:13:59 +00:00
oliverschmidt	36f6efd21c	Build the web server with CTK support.	2007-04-11 01:08:46 +00:00
oliverschmidt	743ec10b21	Added copyright notice.	2007-04-11 01:07:47 +00:00
oliverschmidt	902e2226b6	Use the cpu/native/net WinPcap driver for platform/win32 as well.	2007-04-11 00:33:08 +00:00
oliverschmidt	0b140bdec4	Integrated WinPcap driver into platform/win32 Cygwin build.	2007-04-11 00:32:31 +00:00
oliverschmidt	4bf1ecc20e	Made endianess configuration actually work.	2007-04-11 00:25:38 +00:00
oliverschmidt	ee6180dec6	Use the cpu/native/net WinPcap driver for platform/win32 as well.	2007-04-11 00:17:25 +00:00
oliverschmidt	2edc0246a3	Removed unnecessary directory reference.	2007-04-10 21:02:59 +00:00
oliverschmidt	38c3950d66	Link WinPcap packet driver statically into the main binary in preparation of removing the services.	2007-04-09 11:57:15 +00:00
oliverschmidt	9cc1871810	Fixed stupid bug. I have no idea how I didn't run into this one for months ! The development platforms have 400-600 bytes buffer size. So every incoming 1500 packet overwrote ~ 1000 bytes of uIP variables. And this happens very easily as every packet coming in for the Windows IP stack is seen by uIP as well (and discarded because of the wrong IP address).	2007-04-08 20:06:56 +00:00
oliverschmidt	d0e75920f1	Moved VC++ project files into vcproj subdirectory.	2007-04-06 23:53:59 +00:00
oliverschmidt	5653794966	Allow to build platform/win32 using Cygwin and the Contiki build system. The WinPcap driver is missing as it is about to be changed from dynamic to static loading anyway.	2007-04-06 23:09:32 +00:00
oliverschmidt	5532354cd8	Now that Contiki has a htonl() we need the same workaround here that we already have for htons().	2007-04-06 22:36:31 +00:00
nifi	0b4a7e1c3d	network setup for uip with slip	2007-04-05 08:11:57 +00:00
bg-	8f822c42b1	* Device driver for the SHT1x on the Tmote sky.	2007-04-04 12:48:50 +00:00
bg-	9205ceda12	* rm uip_log. ... * more forced inclusions.	2007-04-04 11:41:38 +00:00
bg-	48c5cae451	* More routing and forwarding cache entries.	2007-04-04 11:39:49 +00:00
bg-	0d4799a415	* rm uip_log.	2007-04-04 11:38:35 +00:00
fros4943	6910c4d311	starting the tr1001 rime process at init	2007-04-04 09:12:14 +00:00
adamdunkels	04a5405540	Added initialization of rtimers	2007-04-03 19:04:50 +00:00
adamdunkels	c24044e80c	Made text appear lower to the right, made window larger to accommodate all nodes	2007-04-02 17:58:43 +00:00
fros4943	66e6ce1656	minor changes	2007-04-02 16:31:28 +00:00
fros4943	3d5298ab69	always consuming button events ... (bug fix: mote falls asleep during fast button clicks)	2007-04-02 14:14:26 +00:00
nifi	472619fe9c	changed notification printout to be one line	2007-04-02 13:35:54 +00:00
fros4943	6e3dc4d24b	added source file check before launching cooja	2007-04-02 10:28:52 +00:00
adamdunkels	05692681a7	Stats are already printed during exit()	2007-04-02 10:03:35 +00:00
fros4943	0f17706ef3	automatically generating cooja.jar	2007-04-02 09:07:30 +00:00
fros4943	c06c28c668	new mulithreading switch function. ... should work on both linux and win32 platforms	2007-04-02 08:47:28 +00:00
oliverschmidt	5bceecfbb0	Added Cygwin networking support using WinPcap.	2007-04-01 21:05:17 +00:00
oliverschmidt	01b9b31952	Moved wpcap*.[ch] from platform/minimal-net/net to cpu/native/net.	2007-04-01 20:39:05 +00:00
adamdunkels	e6301c6221	Moved tapdev*.[ch] from platform/netsim/net and platform/minimal-net/net to cpu/native/net	2007-03-31 18:49:37 +00:00
adamdunkels	8e45418649	Made sure that two packets sent consecutively from the same node do not interfere with each other	2007-03-31 18:47:27 +00:00
adamdunkels	58f45dbc19	Updated to use the cpu/native makefile	2007-03-31 18:44:14 +00:00
nifi	1432347ca5	typo	2007-03-30 11:07:11 +00:00
nifi	6aff1d2f57	changed to display contiki version + added notification about node id	2007-03-30 08:27:47 +00:00
adamdunkels	576cb01fb4	Short description of the Tmote Sky platform	2007-03-29 23:13:39 +00:00
adamdunkels	3908b238c1	Added debug output	2007-03-29 22:26:33 +00:00
adamdunkels	3abd973edb	Added route addition and removal when starting and exiting	2007-03-29 22:26:17 +00:00
adamdunkels	78043e4d24	Set an appropriate IP node address	2007-03-29 22:25:39 +00:00
adamdunkels	8935ccb74f	Removed reliance on a large uIP buffer configuration. Now internally uses 2048 bytes buffers regardless of uIP buffer size	2007-03-29 22:25:25 +00:00
adamdunkels	4a3f6b5e97	Put the correct tapdev_output() function in the tapdev netif	2007-03-29 22:24:47 +00:00
adamdunkels	39b5f9e81f	Added Rime buffer size, reduced uIP buffer size so that IP packets can be tunneled over Rime's mesh routing	2007-03-29 22:24:21 +00:00
adamdunkels	b83dd79b1d	Removed stuff that was already in cpu/native/Makefile.native	2007-03-29 22:23:49 +00:00
adamdunkels	9da9650ff5	Removed stuff that was already in cpu/native/Makefile.native, and included it	2007-03-29 22:23:31 +00:00
adamdunkels	a8b3ec1a3b	Added a small notification printout	2007-03-29 22:23:01 +00:00
adamdunkels	d1b791f693	Removed default reliance on uIP	2007-03-28 20:34:33 +00:00
adamdunkels	b7ab1bb721	Removed reliance on x86 cpu	2007-03-28 20:24:45 +00:00
adamdunkels	227a3fa633	Removed old rt-arch and replaced it with rtimer-arch in cpu/native	2007-03-28 20:21:42 +00:00
adamdunkels	1dea784225	Set IP addess to match the setting in the ifconfig in net/tapdev.c	2007-03-28 20:15:39 +00:00
adamdunkels	9917b2fba4	Removed tapdev-drv	2007-03-28 20:15:15 +00:00
adamdunkels	846d8eb92b	Removed tapdev-drv, removed reliance on x86 platform	2007-03-28 20:14:59 +00:00
adamdunkels	af1c78dbe0	Replaced with tapdev-service.c	2007-03-28 20:14:11 +00:00
adamdunkels	99f8221f3b	Removed unused code	2007-03-28 19:53:48 +00:00
nifi	de2eb196c6	updated for new API, fixed include, and added activation of pir & vib sensors	2007-03-28 11:04:07 +00:00
nifi	97f660451f	added initialization of flags	2007-03-28 09:58:47 +00:00
joxe	b6008e9821	fixed some buggy comments	2007-03-28 09:52:35 +00:00
oliverschmidt	342e720cfd	- Moved all ARP handling to service wrapper (and narrowed interface to low level code). ... - Adjusted packet forwarding to moving all ARP handling to service wrapper. - Unified general coding/formatting style.	2007-03-27 21:47:17 +00:00
oliverschmidt	35051ffbd3	Adjusted packet forwarding to moving all ARP handling to service wrapper.	2007-03-27 21:26:24 +00:00
oliverschmidt	571b956400	Added missing adjustment to recent change on moving all ARP handling to service wrappers.	2007-03-27 21:19:35 +00:00
oliverschmidt	df02b4667a	Copied tapdev from minimal-net to gtk.	2007-03-27 20:49:09 +00:00
oliverschmidt	1ca96b614a	- Removed unnecessary PROCESS_POLLHANDLER(pollhandler()) as pollhandler is explicitly called. ... - Moved all ARP handling to service wrappers (and narrowed interface to low level code). - Unified general coding/formatting style.	2007-03-27 20:41:10 +00:00
oliverschmidt	52da435b27	Made import library consistent with header file.	2007-03-27 20:01:35 +00:00
oliverschmidt	fe0e9fde11	Updated VC++ project file.	2007-03-27 19:59:06 +00:00
oliverschmidt	8f160a3286	Added Cygwin networking support using WinPcap.	2007-03-26 02:53:54 +00:00
adamdunkels	913e33c434	Increased RAM for loadable modules	2007-03-25 21:54:06 +00:00
fros4943	b42d4fa7e3	added quickstart shortcut ... "make TARGET=cooja"	2007-03-25 18:22:41 +00:00
adamdunkels	ea33b82b1a	Set Rime address on boot up, activate button sensor	2007-03-25 17:21:49 +00:00
adamdunkels	6914fd8ae0	Removed loader/ subdirectory	2007-03-25 17:21:33 +00:00
adamdunkels	a9698f32fa	Updated LD=gcc	2007-03-25 17:21:10 +00:00
adamdunkels	3eb156019e	Documentation fix	2007-03-25 17:15:43 +00:00
fros4943	77ec45b223	don't define symbols as phone target on windows platforms	2007-03-23 21:36:48 +00:00
nifi	14892592c6	changed to use msp430-bsl to upload programs	2007-03-23 16:27:14 +00:00
nifi	f0ce3a5292	Moved buildscripts from cpu/msp430 to platform/esb.	2007-03-23 16:19:41 +00:00
nifi	84413ddc99	restore of node id + changed to use cfs xmem (external flash)	2007-03-23 16:05:47 +00:00
nifi	09d8a870c7	Program for 'permanently' burning a node ID to external flash	2007-03-23 16:03:11 +00:00
adamdunkels	5b35ae82c7	Made netsim compile under MS Windows / cygwin	2007-03-23 12:23:38 +00:00
nifi	52b9210b57	added cfs xmem size	2007-03-23 12:15:50 +00:00
nifi	54228ae6e4	Node IDs are stored in external memory and restored on bootup	2007-03-23 09:59:08 +00:00
adamdunkels	3950632b20	Removed non-functional cfs-xmem, replaced with cfs-ram	2007-03-23 00:00:29 +00:00
adamdunkels	4d9a716a50	ELF loader memory size, CFS RAM memory size	2007-03-23 00:00:15 +00:00
adamdunkels	aea251f807	added radio-sensor	2007-03-22 23:59:54 +00:00
adamdunkels	a34f6afe22	CFS RAM started	2007-03-22 23:59:26 +00:00
adamdunkels	c5aeed9d00	Radio sensor (RSSI) interface	2007-03-22 23:53:56 +00:00
fros4943	9594c3fca4	decreased debounce timer	2007-03-22 20:37:34 +00:00
adamdunkels	630ec03ba1	Added IP/SLIP support	2007-03-22 19:04:43 +00:00
adamdunkels	1b762247fa	Added uip-over-mesh, bugfixes, printing of statistics, renamed init() function to netsim_init()	2007-03-22 18:59:34 +00:00
nifi	b3ecbbd2ee	fixed includes	2007-03-22 18:22:11 +00:00
fros4943	052f4e3a24	renamed test processes	2007-03-22 10:04:47 +00:00
adamdunkels	67f08c398e	Added CFS xmem	2007-03-21 23:26:34 +00:00
adamdunkels	70c1652c13	Added CFS xmem conf	2007-03-21 23:26:25 +00:00
adamdunkels	13938ab079	Added CFS xmem module	2007-03-21 23:26:12 +00:00
adamdunkels	8fe031f3de	Fading LEDs	2007-03-21 23:17:28 +00:00
adamdunkels	b2174f1010	Initialization file for setting up a lattice network	2007-03-21 09:07:15 +00:00
adamdunkels	6a0056eefb	Added lib/sensors.h include	2007-03-20 20:09:17 +00:00
adamdunkels	f18d88a2e0	Added Rime support to Cooja	2007-03-20 20:08:51 +00:00
adamdunkels	bba0485797	Experimental energy estimation code	2007-03-19 00:30:13 +00:00
adamdunkels	45e2b19940	Architecture-specific code for the real-time module, for the native and netsim platforms	2007-03-19 00:26:54 +00:00
fros4943	8ebb7dbf27	separated send-to-simulator.function from uIP	2007-03-18 19:31:36 +00:00
ksb	7c8665fb89	Padded struct codeprop_tcphdr to 4 bytes, to get around different ... alignment on different platforms.	2007-03-18 13:15:00 +00:00
fros4943	997a286b5d	tr1001 init fix	2007-03-16 12:19:33 +00:00
adamdunkels	109a377a91	Renamed tr1001-drv to tr1001-uip	2007-03-16 11:34:05 +00:00
adamdunkels	9adc7dc49b	Added LPM and IRQ configuration to make Tmote Sky port build with the Contiki build system	2007-03-15 21:59:44 +00:00
adamdunkels	f856806909	Fixed compiler warning	2007-03-15 21:59:10 +00:00
adamdunkels	79f04d8dcd	Updated to latest rim input/output function names	2007-03-15 21:58:37 +00:00
adamdunkels	03f847d280	Added rime include	2007-03-15 21:58:13 +00:00
adamdunkels	21633663bc	Added interface for using different TR1001 drivers	2007-03-15 21:57:35 +00:00
adamdunkels	00931bdf9d	Moved to msp430/cpu/dev/	2007-03-15 21:57:06 +00:00
adamdunkels	c47f810e39	Moved to core/dev	2007-03-15 21:56:52 +00:00
adamdunkels	2f36a43843	TR1001 Rime driver	2007-03-15 21:56:16 +00:00
adamdunkels	f569a888fa	Renamed tr1001-drv.[ch] to tr1001-uip.[ch]	2007-03-15 21:55:59 +00:00
adamdunkels	de3cc062fc	Moved all uIP initialization into network initialization code	2007-03-15 21:53:15 +00:00
adamdunkels	3000eeaaaa	Added definition to make IRQ port 1 be compiled	2007-03-15 21:52:44 +00:00
adamdunkels	c50e402743	Added uip-ipchksum.o	2007-03-15 21:50:23 +00:00
adamdunkels	de76880582	Button sensor driver	2007-03-15 21:44:51 +00:00
adamdunkels	cccd13ca75	Files for incorporating the Tmote Sky port into the Contiki build system	2007-03-15 21:44:28 +00:00
adamdunkels	9d030483ff	Removed ethernode uIP driver from the main code	2007-03-14 00:32:30 +00:00
adamdunkels	4477d81be4	Added Rime driver for the netsim ethernode layer, renamed init.c to netsim-init.c	2007-03-13 13:07:47 +00:00
ksb	6a184e0897	Added codeprop loading to RAM. ... Moved some stepper code to Thumb so it could be dynamically linked to.	2007-03-07 16:15:00 +00:00
oliverschmidt	d684c14aa6	Factored out settings specific more to architecture and/or toolchain rather than specific target.	2007-03-03 13:39:42 +00:00
oliverschmidt	5d2f948bba	Allow to build the statically linked telnet-server and webserver examples using cc65.	2007-03-03 13:38:07 +00:00
ksb	5af5a5a9a5	Fixed error in calculation of future speed	2007-02-24 15:26:02 +00:00
ksb	20eaa31eff	Platform specific code for a robot using stepper motors.	2007-02-24 00:21:16 +00:00