Commit graph

1885 commits

Author SHA1 Message Date
Robert Quattlebaum 5afcbf6fff Makefiles: Allow setting UIP_CONF_IPV6=0 to work as expected.
Setting UIP_CONF_IPV6 to zero from the make build command line is
something that seems like it should ensure that IPv6 is disabled, but in
fact it actually *enables* IPv6. This seems counter intuitive, so this
patch changes the behavior of the makefiles to handle this case
properly.
2013-01-14 22:03:42 -08:00
Giovanni `evilaliv3` Pellerano ee556dcf14 minor corrections to adhere contiki code style guidelines 2012-12-21 12:36:29 +01:00
Giovanni `evilaliv3` Pellerano fdd380e7ca added support for SEED-EYE board (http://rtn.sssup.it/index.php/hardware/seed-eye) 2012-12-20 23:57:47 +01:00
George Oikonomou f5bc1c92ba Update to the new ds6_route API 2012-12-16 19:28:56 +00:00
George Oikonomou 351a4d39b9 Code style fixes: cc2530dk 2012-12-16 19:28:56 +00:00
George Oikonomou b4bb51e811 Code style fixes: sensinode 2012-12-16 19:28:55 +00:00
Moritz 'Morty' Strübe 79aa5dbc01 Get rid of generc ihex-file to allow parallel uploads 2012-12-11 12:40:38 +01:00
Moritz 'Morty' Strübe 7213d36d63 Support MOTEIDS for flashing, etc 2012-12-11 12:40:24 +01:00
Adam Dunkels aaa950ab17 Cooja platform changes to get IPv6/RPL to work better 2012-12-10 01:50:32 +01:00
Adam Dunkels 99f541e8fd Updated to the latest uip-ds6-route API 2012-11-27 23:04:34 +01:00
Adam Dunkels 91206e2249 Avoid multiple definitions of NETSTACK_CONF_MAC. Turn on RPL by default. 2012-11-21 20:11:22 +01:00
Adam Dunkels e178787999 Fixed compilation problems on the micaz and exp5438 platforms due to the node-id change 2012-11-20 21:16:50 +01:00
Adam Dunkels ec8c7e9be0 Cleanup of the node-id.h files. The node-id.h file contains
declarations of functions for setting and getting a node ID number, a
functionality that exists on many platforms. Since this functionality
was not considered part of the Contiki core, each platform defined its
own node-id.h file. This commit attempts to clean this up by
collecting the node-id.h into a core/sys/node-id.h file that replaces
the old node-id.h files from the platform directories.
2012-11-20 19:59:46 +01:00
Mariano Alvira 03ab3fe317 Newer and cleaner TARGET=econotag as well as robust mc13224v
configuration system.

(also deprecate TARGET=redbee-econotag)

- mc13224v now automatically probes hardware config for buck converter
and 32kHz crystal as well as automatically monitors battery voltage
and manages the buck accordingly.

- new flashed based config system for mc13224v parameters such has
  radio modes (demod, autoack), nvmtype, mac address, channel and
  power.

- considerably cleaned up econotag platform code (suffered from severe
  case of bit-rot)
2012-11-19 19:16:29 -05:00
Mariano Alvira 2c9a538582 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into bump-libmc1322x
bump libmc1322x to 7bee48243c

Conflicts:
	cpu/mc1322x/board/Makefile.board
	cpu/mc1322x/lib/include/uart.h
	cpu/mc1322x/lib/uart1.c
	cpu/mc1322x/lib/uart2.c
	cpu/mc1322x/src/default_lowlevel.c
2012-11-18 18:27:39 -05:00
Etienne Duble 97da754b1c Fixed login make target repeated in Makefile.mbxxx and Makefile.stm32w108 2012-11-09 15:43:15 +01:00
George Oikonomou 5399fa2b6f cc2530dk: Fixed the startup text for dongle builds
See Pull Request #21
2012-11-04 21:44:34 +00:00
George Oikonomou 53fdb96816 cc2530dk and Sensinode: Local copy of uip-debug.c
Copied this file to the platform directories and
changed it to use putstring(), puthex() etc so
that we can print addresses without linking in
printf

See Pull Request #20
2012-11-04 21:43:57 +00:00
George Oikonomou 1a0f01ccc4 cc253x: Config to swap between UART and USB I/O
See Pull Request #18
2012-11-01 17:41:57 +00:00
George Oikonomou 2cc74c5fd4 cc2530dk: Added a 'Serial over USB' platform process
This is based on a usb-test example by Philippe Retornaz. It has
been moved to platform and modified accordingly. With this in place:

- putchar() can work over USB. So we can use things like
  printf, slip output
- USB input can be redirected to slip or serial input

The example itself is no longer needed in the source tree

See Pull Request #18
2012-11-01 17:41:53 +00:00
George Oikonomou c1d72475d7 cc253x: Renamed P2 interrupt-related files for better consistency
See Pull Request #18
2012-11-01 17:41:38 +00:00
George Oikonomou fea4970142 cc253x: Configurable linkage for the P2 ISR
See Pull Request #18
2012-11-01 17:41:24 +00:00
Philippe Rétornaz ba96408f37 cc253x: Add USB support to the compilation scripts
See Pull Request #18
2012-11-01 17:41:21 +00:00
Philippe Rétornaz ddc8120d7c cc253x: Add p2 interrupt handler
The P2 Interrupt is shared across many periferal (I2C, USB, GPIO).
This adds a generic interrupt handler on which the differents drivers
can register a handler.

See Pull Request #18
2012-11-01 17:41:11 +00:00
George Oikonomou 67bf9ec10e DOS EOL and indentation fixes (platform files)
- Removed some DOS EOLs
- Changed some tabs to spaces
- Removed some trailing whitespaces

Closes #6
2012-10-30 13:44:25 +00:00
Adam Dunkels 944537fccf Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
George Oikonomou 3b0e92168b Copied cc2530 stack functions to the cc2430 port 2012-09-20 15:09:15 +01:00
George Oikonomou b292e02012 Sensinode putdec() debugging 2012-09-20 15:09:15 +01:00
George Oikonomou 95b9d4ee29 Sensinode/cc2430 stack depth optimisation
This replicates the method used by the cc2530 port
2012-09-20 15:09:15 +01:00
George Oikonomou 067fabe0f9 Sensinode main variable optimsations:
r is now uint8_t, allocated to registers
len is uint16_t for more efficent arithmetic

(Changes replicated from the 253x port, originally
contributed by Philippe Retornaz - EPFL)
2012-09-20 15:09:15 +01:00
George Oikonomou cb168da729 Changed the cc2430 sleep_flag to uint8_t 2012-09-20 15:09:15 +01:00
Niclas Finne 4630945475 Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms 2012-09-19 22:49:19 +02:00
Niclas Finne 919ddfbf09 Added delay at startup to let things stabilize before writing to the uart 2012-09-19 22:47:48 +02:00
George Oikonomou ee7af77ca9 Reworked the cc2530 stack debugging facilities:
- Moved to their own file
  (so we can later copy the entire thing over to cc2430)
- Renamed the functions
  (for naming convention reasons)
- The entire thing can be enabled/disabled
- Added a couple more macros
- Hooked into main()
2012-09-07 17:40:17 +01:00
Philippe Rétornaz 780e62d7e8 cc253x: add putdec debug function 2012-09-07 17:32:54 +01:00
George Oikonomou c6ec22c4c8 cc2530: Added a method to maximise stack depth
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
2012-09-07 17:32:53 +01:00
Philippe Rétornaz a0d2988846 cc253x: Don't force __data usage
SDCC optimize "r" and put it in a register.
Don't force len to be in __data.
2012-09-07 17:32:10 +01:00
Philippe Rétornaz 666ff6ca55 cc253x: use a uint8_t for sleep_flag
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
2012-09-07 17:32:10 +01:00
George Oikonomou 8699f7741d Fixed typos and a stray printf. Adjusted comments 2012-09-07 17:31:25 +01:00
Ivan Delamer b43dad00b0 Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES
#defines.
2012-09-04 11:12:18 -06:00
Antonio Lignan c5e9d688a5 Fixed sht11 driver, now ensures the i2c bus is disabled when initializing 2012-08-16 14:12:27 +02:00
Antonio Lignan 73e7f25cbc Simple phidget-like relay driver for the Z1 mote with basic functionalities 2012-07-30 11:27:13 +02:00
George Oikonomou 62fbd389d8 Renamed a cc253x SFRX to stop namespace conflicts
The TR0 SFRX can not use the name TR0 because it
conflicts with TCON.TR0 on the default 8051.

See SDCC bug 3513300
2012-07-11 10:53:14 +01:00
David Kopf 37c407b177 Patch from Landon Fuller adds const to PROGMEM, required for newer avr-gcc 2012-06-10 12:54:11 -04:00
Niclas Finne d1bef2b68a Bug fix: setup MAC address based on node id if no MAC address was restored from external flash 2012-06-07 10:45:05 +02:00
Adam Dunkels fd2e238d99 The __delay_cycles() function in the latest mspgcc takes an unsigned long argument but does not allow it to be larger than 65536. 2012-06-04 17:41:12 +02:00
Fredrik Osterlind d270e4943d bugfix: slip must be initialized after ctimer, as it uses ctimers 2012-05-30 12:59:42 +02:00
Niclas Finne b6ed988709 Allow node address to be set by COOJA when emulating. 2012-05-29 19:42:35 +02:00
Niclas Finne 2c460090e3 io and signal have been moved into contiki include file 2012-05-29 19:31:16 +02:00
David Kopf e0dab7c2fc Prefer UART0 for stdout; move DEBUFGLOW macro below definition of uint8_t 2012-05-28 13:08:30 -04:00
Fredrik Osterlind 8ebacd1a1a reverted previous patch that broke compiling on Instant Contiki 2012-05-25 11:25:19 +02:00
Fredrik Osterlind 50caa3650c new experimental feature: possibility to change mote types when loading a simulation
made compile dialogs only select mote interfaces specified in the loaded configuration
2012-05-23 14:59:41 +02:00
George Oikonomou 0fc5ec8d5c Fixed an SDCC compile error when UIP_CONF_ROUTER is 0. UIP_CONF_ROUTER can be configured in project-conf.h 2012-05-16 15:22:31 +01:00
George Oikonomou 2f89f41b5a cc2x3x RPL/non-RPL handling:
- Relevant examples explicitly request it in their Makefile
- Removed the definition of UIP_CONF_IPV6_RPL from
  contiki-conf.h. If needed, it's defined through a -D
2012-05-16 15:22:31 +01:00
George Oikonomou 259b497122 Minor Sensinode build cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou 1f7171f943 Adjust cc2x3x ports to the new clock API 2012-05-16 15:22:31 +01:00
George Oikonomou fea95ae088 Easily configure B2 on the cc2531 USB stick as a General-Purpose or Reset button 2012-05-16 15:22:31 +01:00
George Oikonomou cc76c649b1 The cc2530 button driver would fail to compile if the user disabled button support 2012-05-16 15:22:31 +01:00
Antonio Lignan 6df9ffb731 Zolertia's light sensor ziglet 2012-05-11 13:39:59 +02:00
Fredrik Osterlind 4cf4a48592 minor bugfix: did not compile with PROCESS_CONF_NO_PROCESS_NAMES=1 2012-05-09 15:07:51 +02:00
Antonio Lignan 3dde89971c Add disable function to I2C driver 2012-05-09 10:54:21 +02:00
Niclas Finne 40595ad5c7 Support for serialdump on MacOS X. Patch by Laurent Deru. 2012-05-07 13:16:27 +02:00
Laurent Deru cc863e7bd4 Sky motelist support for MacOS X 2012-05-07 11:18:09 +02:00
George Oikonomou 6a808053ce cc2531 Button 2 driver 2012-04-26 16:28:04 +01:00
George Oikonomou 5662b1f37d Platform cc2530dk now uses models.h to configure differences between the SmartRF and the 2531 USB stick 2012-04-26 16:28:04 +01:00
George Oikonomou 38a222e83c Redefined LEDS_ALL for cc2531s 2012-04-26 16:25:04 +01:00
George Oikonomou c95fc4f360 cc2531 B1 support. B2 to come 2012-04-26 15:28:43 +01:00
George Oikonomou 26ae56fcaf cc2531 LED support 2012-04-26 15:28:43 +01:00
George Oikonomou 1db1649b6a The cc2530dk Makefile was adding a source twice
Also, removed an obsolete comment
2012-04-26 15:28:43 +01:00
George Oikonomou dd26accc07 We can now use SDCC's __nonbanked feature
This allows us to reduce CODE footprint of SDCC projects
built with --model-huge. Use carefully!

* Added a facility which allows us to enable/disable the
  feature from the CPU dir (CC_CONF_NON_BANKED_OPTIMIZATION)
* Added the CC_NON_BANKED keyword to some platform files
  (expands to __nonbanked)
* Started using this for some examples
2012-04-26 15:28:43 +01:00
Adam Dunkels b4e7468b12 Set CCA threshold before starting, to make ContikiMAC more efficient. Fix compilation problem with non-IPv6 compiles. Various style fixes. 2012-04-22 20:54:02 +02:00
George Oikonomou e95f94a9a8 Added support for reading MAC from the cc253x flash
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
2012-04-20 16:03:38 +01:00
George Oikonomou 29090a3dda The cc253x Makefile specifies SoC flavor
This will help us slowly add better support for smaller SoCs
instead of just assuming that all cc253x SoCs are F256

- We build for F256 by default but the project Makefile can override this
- We currently ignore this when passing --code-size. This is a ToDo
- The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant
2012-04-20 16:03:38 +01:00
George Oikonomou 4a78021c62 Simplified the cc2530dk STARTUP_CONF_VERBOSE spaghetti and made it project-configurable 2012-04-20 16:03:37 +01:00
Niclas Finne 1b13b69814 Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611 2012-04-10 16:05:10 +02:00
David Kopf cac4e9a222 Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t.
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
2012-04-09 15:49:53 -04:00
George Oikonomou b3de052e01 Ported the stack-friendly clock ISR code over from cc243x to cc253x 2012-04-03 16:26:10 +01:00
George Oikonomou 11a7f644ac Comment rewording and formatting 2012-04-03 16:26:10 +01:00
George Oikonomou ce17fa131c Stack-friendly cc243x clock ISR enabled by default
This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate
as originally thought. In fact, it has pretty much the same
accuracy as the old, stack-hungry version.

* Renamed the define from CLOCK_CONF_ACCURATE (1: old) to
  CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying
  that one is more accurate than the other.
* Using CLOCK_CONF_STACK_FRIENDLY by default.
2012-04-03 16:26:10 +01:00
simonduq 1fd7dcd2ef mb* pltforms: reduce RAM footprint 2012-04-03 14:29:46 +02:00
simonduq 935460c25e Fixed mbxxx's contiki-conf.h (bug reported by Konstantin Klubnichkin and Michal Krol) 2012-04-03 14:28:11 +02:00
simonduq 930c7c25bc fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file,
more printouts in main when ipv6 is used, and a target for memory
profiling taking stm's gnu.ld static stack size into account
2012-04-03 11:47:30 +02:00
George Oikonomou 5240519dd9 Renamed a config define to better match contiki's naming philosophy 2012-04-02 11:38:54 +01:00
George Oikonomou 2d0d54c380 Removed obsolete #if config from cc2530dk's main
Unlike cc2430, the cc2530 RF driver never generates interrupts.
This configuration in main() was a remnant of the porting from
the sensinode main, which does in fact need it.
Also updated comments in contiki-conf to reflect that shortcuts
don't influence the RF
2012-04-02 11:22:19 +01:00
George Oikonomou 977bc548f3 Renamed sensinode-debug to debug 2012-04-02 11:22:19 +01:00
George Oikonomou bce34e4b9a For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir.
The value is not really configurable by the platform so having it
in contiki-conf.h didn't make huge sense.
2012-04-02 11:22:19 +01:00
George Oikonomou e02c287f15 Solved a text encoding issue 2012-04-02 11:22:19 +01:00
George Oikonomou d958ee3125 Deleted the old Sensinode 'read mac from flash' routine.
Since the introduction of a purpose-written routine, the old
generic one (which was written in asm) was never being used.
There was a configuration directive which allowed us to switch
between the two. All references to this configuration directive
have also been removed.
2012-04-02 11:21:32 +01:00
George Oikonomou 4f1e251603 Some uN_t had crept back in cc2530dk and sensinode.
Changed to uintN_t plus a bit of code formatting
2012-03-29 13:10:10 +01:00
Joakim Eriksson 7482fd6962 quick fix for enabling native-border router to run under windows - need to cleanup the arguments 2012-03-27 11:09:54 +02:00
simonduq 946f00bf7b stm32w: added ability to upload and reset all connected boards, and login using MOTE=x 2012-03-26 23:00:44 +02:00
George Oikonomou ad256e5014 New platform: TI cc2530 Development Kit
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00
George Oikonomou b7674c3636 Reincarnate the sensinode/cc2430 port 2012-03-23 14:41:07 +00:00
Matthias Kovatsch d716ee55e7 Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2012-03-21 21:51:03 +01:00
Matthias Kovatsch d57904b289 Fixed bug in IPv6 address print function. 2012-03-21 21:27:52 +01:00
simonduq e4fb360262 stm32w platforms: contikimac support in the Rime case, with EUI-64 2012-03-20 17:30:59 +01:00
simonduq 0eb9a46e3a stm32w platforms: contiki-conf cleanup and added platform-conf 2012-03-20 17:30:57 +01:00
simonduq 762097eb50 stm32w platforms: 64-bit rtimer causes a bug in arm-none-eabi-objcopy 2.18.50, use 32-bit rtimer instead 2012-03-20 17:30:45 +01:00
simonduq 7784cf7827 stm32w platforms: use 2 cca and default contikimac guard time 2012-03-20 17:30:05 +01:00
simonduq 5da4463236 adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La) 2012-03-20 17:29:58 +01:00
Fredrik Osterlind 862452b5b0 removed debugging output, code style 2012-03-13 14:17:43 +01:00
Niclas Finne cf3827829d Added resource definition for button, leds, and battery, and removed obsolete compiler setup 2012-03-09 20:35:49 +01:00
Fredrik Osterlind 97c7a55eea simulating 1 ms turnaround time (before transmissions) by default, and no transmissions on channel busy 2012-03-09 14:58:13 +01:00
Fredrik Osterlind e8294e8699 added objcopy external tools configuration
changed nm command to sort numerically, and changed regexpressions to accept output from newer gcc versions
added more debugging info under help menu
2012-03-09 14:57:21 +01:00
Niclas Finne c2e07c9798 Improved support for the IAR compiler.
io and signal have been moved into contiki include file.
2012-03-08 22:41:55 +01:00
Matthias Kovatsch f67fb672eb Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2012-03-08 00:49:25 +01:00
Matthias Kovatsch 87cd18539b Eliminated RPL_CONF_ADJUST_LLH_LEN correction by using uip_l3_icmp_hdr_len instead of uip_l2_l3_icmp_hdr_len. 2012-03-08 00:48:04 +01:00
Niclas Finne ff7a977dc7 Improved support for the IAR compiler for the MSP430 platforms 2012-03-07 23:09:05 +01:00
Niclas Finne 569477b10c contiki-sky-platform is added by Makefile.sky 2012-03-07 23:07:57 +01:00
Niclas Finne 09e45cb12c contiki-z1-platform is added by Makefile.z1 2012-03-07 23:07:47 +01:00
Niclas Finne 11fecd86da Moved i2cmaster and adxl345 to contiki target source files 2012-03-07 23:07:28 +01:00
Niclas Finne a8e8e6f51d io and signal have been moved into contiki include file 2012-03-07 23:05:10 +01:00
Niclas Finne 684c3edfa6 Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood. 2012-03-07 23:04:52 +01:00
Ilya Dmitrichenko 1214086f97 Fixed TARGET=minimal-net compilation issues on Darwin. 2012-03-02 15:15:49 -05:00
Ilya Dmitrichenko 499d3052ee Fixed TARGET=native compilation issues on Darwin. 2012-03-02 15:15:42 -05:00
David Kopf 79d65d2adc Merge branch 'master' of git://contiki.git.sourceforge.net/gitroot/contiki/contiki 2012-02-25 10:17:57 -05:00
Ilya Dmitrichenko 4b60851527 Missed ifeq ... 2012-02-25 10:09:35 -05:00
Ilya Dmitrichenko 9c99d46e24 Simplified host OS platform detection in Makefiles 2012-02-25 10:09:33 -05:00
Mariano Alvira 008250afc6 econotag: increase UIP_CONF_RECEIVE_WINDOW to 300 for webserver nano 2012-02-24 12:19:05 -05:00
David Kopf deb75d3d97 Several bugfixes 2012-02-21 11:14:52 -05:00
David Kopf 6e45dfe5ff PROGMEM changes needed for newer avr-gcc compiler 2012-02-21 11:10:57 -05:00
Nicholas J Humfrey 680225e99d Converted u8_t to uint8_t and u16_t to uint16_t in the platforms directory.
Added "These names are deprecated, use C99 names" warnings the contiki-conf.h files that were missing it.
2012-02-21 08:33:25 -05:00
David Kopf 20a5c794dd Move address initialization to after proce_init. Something in that now wiping the address array. 2012-02-11 15:19:28 -05:00
Fredrik Osterlind aecb4b03cc bug fix: rpl was not included correctly 2012-01-31 14:53:52 +01:00
Adam Dunkels acb2c28fdd small code style fixes; removed left-over function call 2012-01-25 06:41:39 -08:00
Adam Dunkels cdfc788967 Increased wait time between main loop polls; cleaned up the code to Contiki code style standards; moved process autostart code to after network setup 2012-01-25 06:34:10 -08:00
Niclas Finne aceb36c66b Replaced SELECT_CALLBACK with an API that supports multiple select callbacks 2012-01-19 17:52:01 +01:00
Adam Dunkels 5e1946276b Removed erroneous character from first line of file. 2012-01-18 12:37:03 -08:00
Adam Dunkels 959096ca67 Contiki port to the TI EXP5438 MSP430x5438a experimenters board 2012-01-18 07:27:59 -08:00
Adam Dunkels 465c401cdc Reduce size of the neighbor table entries to make RPL fit into the Tmote Sky RAM. 2012-01-18 06:15:38 -08:00
Adam Dunkels 6185da7b80 Default to SMALL unless otherwise specified, to get size of binaries smaller so that Contiki with RPL/IPv6 fits on the Tmote Sky again. 2012-01-18 06:13:17 -08:00
Niclas Finne 42a7125ce7 fixed compiler warning 2012-01-17 21:47:48 +01:00
Niclas Finne 9ea5149433 The definitions for PxSEL2 are missing in some versions of mspgcc 2012-01-16 13:00:16 +01:00
Niclas Finne 1c6c4ba2f1 Added resource definition for button and removed obsolete compiler setup (compiler setup is now handled by cpu/msp430/msp430def.h) 2012-01-11 01:54:52 +01:00
David Kopf 58298f59db Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
2012-01-10 12:42:27 -05:00
Niclas Finne f3db12c19d MSP430 setup for f2xxx based on Z1 2012-01-09 14:56:03 +01:00
Niclas Finne 9ffcd53868 Fixed compiler warning (with IAR compiler) 2012-01-09 14:56:00 +01:00
Niclas Finne 3daa822f89 Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc) 2012-01-09 14:55:57 +01:00
Niclas Finne 8aaa9d14b7 minor code cleanup 2012-01-09 14:55:51 +01:00
Niclas Finne 987b57b015 moved macros to implementation file, end-of-line normalization, code style 2012-01-09 14:55:43 +01:00
Niclas Finne 013571ed3f * Removed __MSP430X__ (already defined by newer mspgcc4)
* Commented out pragma not supported by mspgcc
2012-01-09 14:55:40 +01:00
Niclas Finne 866bc91e5a enabled nullrdc autoack support 2012-01-09 14:55:37 +01:00
Niclas Finne cdfa8708e3 * Added f2xxx for two series (for example z1)
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
2012-01-09 14:54:57 +01:00
Niclas Finne f4f84ffca4 Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X 2012-01-09 14:54:01 +01:00
Niclas Finne d1b22d40fa leds setup for WiSMote 2012-01-09 14:41:45 +01:00
Niclas Finne 8aa1011c03 Removed explicit specification of data model small for IAR compiler. Data model small is default and this will allow projects to override the data model 2012-01-09 14:41:39 +01:00
Niclas Finne 708f9d77d2 Corrected timing for higher CPU speed 2012-01-09 14:41:36 +01:00
Niclas Finne 6c5379606b Set node_id, disabled watchdog for now 2012-01-09 14:39:32 +01:00
Niclas Finne 05b10eb9ce Initial WiSMote port based on code from Arago Systems. 2012-01-09 12:25:06 +01:00
Niclas Finne 367c82a5ab added compiler flags and macros for IAR and mspgcc 4.4.5 compilers 2012-01-09 12:24:33 +01:00