1454 commits

Author	SHA1	Message	Date
joxe	f069320ca9	removed sequence_number and replaced with version - fixing global repair functionality	2010-06-02 11:59:51 +00:00
joxe	fec0e8df69	changed RPL to be more 08 compliant - DIO and DIO options are formatted as in RPL-08	2010-06-01 22:30:02 +00:00
joxe	7887559d56	fixed bug in ttl decompression	2010-06-01 12:37:54 +00:00
joxe	518f9c1a00	refactoring and cleanup	2010-05-31 20:42:27 +00:00
nifi	b54c6e673b	Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t for compability with IPv6	2010-05-31 15:22:08 +00:00
nvt-se	c13bb8666b	Better validation of incoming DIOs. Added a reset function to the OF API.	2010-05-31 14:22:00 +00:00
oliverschmidt	126ea40994	Removed UIP_CONF_PLAIN_BUFFER again now that the pointer indirection to uip_buf was removed again.	2010-05-30 09:46:12 +00:00
nvt-se	f135105567	Added support for multiple objective functions. ... Extended the objective function API with a callback function that receives link-layer neighbor information. Throttled DAO transmissions to one per DEFAULT_DAO_LATENCY period. Added support for an ETX objective function (hysteresis control still lacking though). Fixed a leak of routes installed by DAOs. Control that dst_adv_supported is set before sending DAOs. Improved debugging output.	2010-05-29 22:23:21 +00:00
nifi	f6e0b46f38	* Made Chameleon header processing module configurable (CHAMELEON_CONF_MODULE) ... * Removed the unused init function from header processing modules * Added option CHAMELEON_CONF_WITH_MAC_LINK_ADDRESSES to specify that MAC link addresses should be used instead of Chameleon's own encoding of sender and receiver. This avoids encoding the link addresses twice when the MAC RDC has its own addresses.	2010-05-28 06:18:39 +00:00
nifi	b7b2c8fcde	Added macro to identify address attributes for use in header processing modules	2010-05-27 20:28:29 +00:00
nifi	ac9b862cd0	Added configurable support for 802.15.4 autoack	2010-05-26 14:12:33 +00:00
nvt-se	320fa820ca	Renamed neighbors to parents. Removed redundant code. Corrected the logic for max rank increase.	2010-05-25 21:58:54 +00:00
joxe	34b8313fb6	added experimental support for disseminating autoconf prefix via DIO suboption	2010-05-25 19:19:43 +00:00
nvt-se	6c4bf93141	Handle MAC_TX_ERR notifications.	2010-05-25 15:29:51 +00:00
nvt-se	c5d1c3ea27	Improvements to local repair and DAO handling.	2010-05-24 16:38:56 +00:00
nvt-se	f882901bf6	Remove unreachable neighbors immediately, rather than using an ETX threshold that leads to slow topological repairs. ETX information should later be stored even for removed neighbors if there is room.	2010-05-24 16:38:17 +00:00
joxe	16c212798f	cleanup of the code, removing dead core + adding local vars to save some space.	2010-05-24 14:28:56 +00:00
joxe	2d447502d4	changed uip_buf to a union for 32-bit alignment	2010-05-24 10:07:34 +00:00
joxe	9db7f06368	fixed compiler warnings	2010-05-24 09:57:20 +00:00
joxe	56a3a71108	added include of string.h since memcpy are used	2010-05-19 16:16:57 +00:00
joxe	5c30aed814	removed nd llao option struct since not naturally aligned - replaced struct fields access with array based access	2010-05-19 12:21:45 +00:00
nvt-se	4411807b29	Fixed bug in DAO input. Made printfs more portable.	2010-05-18 16:43:56 +00:00
nifi	ed4debe285	Changed neighbor notification to be default on when using RPL	2010-05-11 10:02:29 +00:00
nifi	7aeb206840	Added isinfinite to uip_ds6_defrt_t to handle infinite life time	2010-05-10 13:46:35 +00:00
joxe	058ef029e4	replaced hardcoded value with constant for route lifetime	2010-05-10 11:16:35 +00:00
joxe	c0c7cea3ce	fixed bug that caused select_src to set a non legal address - now sets unspecified if no address found	2010-05-10 11:10:27 +00:00
joxe	6f66d36d67	avoid sending DAO when address is tentative	2010-05-09 19:12:47 +00:00
joxe	adb00ed932	factored out function for getting link local address in ds6 and made use of it in rpl for checking state of lladdress as DIOs should not be sent when tentative	2010-05-09 17:52:37 +00:00
oliverschmidt	e5665fb968	The recent change turning uip_buf from an array to a pointer seems a quite heavyweight way to have the uip_buf alligned to a 32-bit boundary. Contiki is - still - supposed to be portable across a wide range of toolchains - therefore it i.e. intentionally doesn't use C99 features. From that perspective it seems questionable if all toolchains are able to optimize away the overhead imposed by an "unnecessary" indirection to access uip_buf - and uIP consists mostly of accesses to uip_buf. Even if the future is supposed to bring support for multiple uip_bufs which would turn the uip_buf pointer from a mere workaround to an neceesary element on can still presume that there will be targets with resources limited in a way prohibiting the use of several uip_bufs. So at least for those targets will still be a usecase for a "plain", not indirected uip_buf. ... Therefore it seems reasonable to allow to stay with the "plain" uip_buf at compile-time.	2010-05-08 07:23:55 +00:00
oliverschmidt	dec19626e8	Adjusted UIP_CONF_EXTERNAL_BUFFER to apply to actual buffer only.	2010-05-07 20:45:16 +00:00
fros4943	bc0ea1f81d	bug fix: dag pointer may be NULL	2010-05-07 13:51:34 +00:00
joxe	cd5dfa9692	added const for the uip_buf pointer for more efficient and smaller uip code and fixed same construct for the sicslowpan code	2010-05-05 13:07:45 +00:00
nvt-se	361e210751	Improvements to style and commentary.	2010-05-04 22:55:32 +00:00
joxe	01881f92a8	added missing include	2010-05-04 14:41:55 +00:00
joxe	790819e701	allocate uip_buf as uint32_t to avoid risk for unaligned uip_buf on 32 or 16 bit architectures	2010-05-04 09:19:41 +00:00
joxe	7d235841b3	always include the RPL route state to allow compilation of rpl code	2010-05-03 14:12:03 +00:00
nifi	6c86398778	Added check to not copy or create too large packets	2010-05-02 14:59:11 +00:00
nifi	a04372adc4	Fixed conversion of packetbuf address type to address index and corrected return value	2010-05-02 12:21:34 +00:00
joxe	f72bd5572c	added initialization of RPL	2010-05-01 13:04:31 +00:00
joxe	0531d9bd82	moved RPL routing state struct into uip-ds6	2010-05-01 12:02:25 +00:00
nvt-se	9a4a9b9437	Removed return value in function that should not return a value.	2010-04-30 23:13:58 +00:00
nvt-se	ecada2d1ac	*** empty log message ***	2010-04-30 23:10:45 +00:00
nvt-se	b8a3a4109e	Adjusted the code so as to remove compilation warnings.	2010-04-30 22:18:12 +00:00
nvt-se	b822dbb25e	Addressed compilation warnings.	2010-04-30 15:04:47 +00:00
nvt-se	4106f4d798	Increased minimum DIO interval from 1024 ms to 4096 ms in order to more calm in duty-cycled networks.	2010-04-30 15:03:55 +00:00
joxe	168a65d989	added ContikiRPL - an implementation of IETF ROLL RPL	2010-04-30 13:43:53 +00:00
joxe	167b0d636e	added icmp_send function and moved rpl input function signature	2010-04-30 13:22:21 +00:00
joxe	dc1a5f70ff	added uip-debug utilities	2010-04-30 13:20:57 +00:00
nvt-se	7e0e2fe284	Removed obsolete rime-route code for IPv6	2010-04-30 12:43:37 +00:00
joxe	cc9914a4f3	fixed uip to use UDP_BUF instead of TCP_BUF when setting udp ports - minor cleanup	2010-04-30 08:46:27 +00:00
adamdunkels	3d10dedecf	Added a safety measure against a problem where a node in rare situations would turn itself into a sink. Not entirely sure why this happens, but the safety measure should at least avoid the results of the problem. Added more debug messages.	2010-04-30 07:33:51 +00:00
adamdunkels	0859d4b95f	Avoid turning off the radio in the middle of a packet reception	2010-04-30 07:32:39 +00:00
adamdunkels	e606c674c2	Rewrote LPP so that it uses 802.15.4 headers. A number of bugfixes with respect to alignment. Avoid turning off the radio in the middle of packet reception.	2010-04-30 07:31:44 +00:00
adamdunkels	55b6129bd2	Debug printout fix	2010-04-30 07:29:31 +00:00
adamdunkels	e523c36cdf	Removed the (unused) header packet of the queuebuf. Added a function for accessing address attributes in the queuebuf	2010-04-30 07:29:08 +00:00
adamdunkels	3c735fcea4	Added a packetbuf flag that indicates if the link layer acks should be used or not	2010-04-30 07:25:51 +00:00
adamdunkels	798f1c63bd	Make it possible to receive multicast UDP packets	2010-04-30 07:19:33 +00:00
fros4943	18e5718c97	avoid freeing queuebuf multiple times, and free buffer after cancelling connection	2010-04-27 13:08:55 +00:00
fros4943	12b6f35ce7	PRINTF()ed debugging output	2010-04-27 12:56:35 +00:00
nifi	85d6f6c514	removed unused variable	2010-04-26 22:41:50 +00:00
nifi	875ad7ffda	Fixed to not change the header if the header allocation fails	2010-04-26 22:05:40 +00:00
nifi	b26f45a35b	code cleanup	2010-04-26 17:55:11 +00:00
nifi	d761b6e89a	Added MAC header to handle padding	2010-04-26 17:46:21 +00:00
nifi	14b1bb9f57	Fixed to only use leds when DEBUG is set	2010-04-20 11:41:16 +00:00
nvt-se	2e5d97366a	ensure matching format and type in debug printf	2010-04-09 16:21:07 +00:00
adamdunkels	3670fac618	Bugfix: timing fixed	2010-04-08 18:23:24 +00:00
adamdunkels	f2bf8965d5	MAC sequence number attribute	2010-04-08 09:46:30 +00:00
adamdunkels	91ff8574ad	Improved handling of duplicate packets	2010-04-08 09:32:56 +00:00
nvt-se	ac4ba199bc	Turn off DEBUG mode by default.	2010-04-06 21:37:54 +00:00
nvt-se	75dd41601b	Added a macro for checking if an address is link local.	2010-04-06 16:47:18 +00:00
adamdunkels	497111bcc9	Added an optional rate limit for broadcast transmissions	2010-04-06 11:57:43 +00:00
adamdunkels	e06a30fdb0	Added MAC-layer duplicate message suppression, which is very helpful when running with duty cycling turned off	2010-04-05 19:28:07 +00:00
adamdunkels	c68ee6e577	Bugfix: memory from the wrong memb was freed.	2010-04-04 21:02:09 +00:00
adamdunkels	a4c328785a	Small timing tweaks	2010-04-04 21:01:24 +00:00
adamdunkels	62039a530d	Removed non-existant cooja-debug.h include	2010-04-04 12:31:47 +00:00
adamdunkels	7d6ff0289e	Fiddled more with the timing: the phase seems stable now at least. Still bugs left though...	2010-04-04 12:28:29 +00:00
adamdunkels	be117afe04	After a lot of tweaking and twiddling with the timing of the ContikiMAC code and the mechanisms in the CC2420 driver, things seem to work somewhat stable now - knock on wood!	2010-04-04 07:49:30 +00:00
adamdunkels	83eaa70f03	Added pending flag	2010-04-03 13:34:20 +00:00
adamdunkels	121ca946e1	Improved phase lock behaviour when neighbor is not duty cycling: senders notify receivers via the 802.15.4 pending bit that they are not duty cycling. Neighbors then will start sending packets immediately and not wait for neighbors' phase. Tweaking of ContikiMAC timers to make it more reliable.	2010-04-03 13:28:30 +00:00
joxe	6ae86d001d	made number of phase neighbors configurable	2010-04-01 17:17:36 +00:00
fros4943	59357e8b75	PRINTF():ed debugging output	2010-04-01 11:08:36 +00:00
adamdunkels	cc11c9d3f2	Added missing #define	2010-04-01 10:56:00 +00:00
adamdunkels	a8d8b6d31d	Improved parent management: parent neighbor is retained until a better neighbor is found (with 1 ETX less than parent). Don't drop parent neighbors when loop is detected (loops are transient anyway).	2010-04-01 10:45:21 +00:00
adamdunkels	d7457bc340	Improved parent management: parent neighbor is retained until a better neighbor is found (with 1 ETX less than parent). Don't drop parent neighbors when loop is detected (loops are transient anyway).	2010-04-01 10:03:19 +00:00
adamdunkels	add426de4b	Bugfixed stream mode: node listens 100% for 0.5 seconds in stream mode. Naming change: is_listening changed is_snooping.	2010-04-01 10:02:04 +00:00
adamdunkels	5b121b4829	Set stream bit only on non-FIN TCP segments	2010-04-01 10:01:01 +00:00
adamdunkels	b43f7830b3	Fine-tuned the timing and phase lock optimization	2010-03-31 20:27:15 +00:00
adamdunkels	4e33112d3e	Guard against malformed broadcast announcements	2010-03-31 12:17:24 +00:00
adamdunkels	877eb2fbe9	Fiddled with the timing	2010-03-31 11:54:38 +00:00
fros4943	3bd07ea55a	bugfix: refresh correct source route ... + refreshing gateway route whenever data is received via a gateway	2010-03-31 09:38:42 +00:00
adamdunkels	bcfa80102d	Had previously not included the waiting time that the CC2420 introduces when sending a packet. Also increased the smallest packet size, just to be on the safe side.	2010-03-30 23:01:32 +00:00
adamdunkels	226abb8ec3	Removed non-existant include file	2010-03-29 22:10:03 +00:00
adamdunkels	4e3268e2e2	Added function that removes the header	2010-03-29 21:53:04 +00:00
adamdunkels	4c3b69dc07	Configuration parameter for number of MAC-layer retransmissions	2010-03-29 21:52:25 +00:00
adamdunkels	9c58768b59	Extend packet size after creating 802.15.4 header; prepare radio chip with packet before waiting for neighbor phase to make phase wait time deterministic	2010-03-29 21:51:36 +00:00
adamdunkels	b4b7e942b6	Back off a guard time for every non-ack packet	2010-03-29 21:50:01 +00:00
oliverschmidt	315e446584	Adjusted formal parameter to single existing actual parameter.	2010-03-29 20:26:14 +00:00
fros4943	0fcbfae836	updated function: has_value argument was missing	2010-03-29 12:13:35 +00:00
fros4943	671629dea0	moved packet_sent function, it was in a HC06-specific unit	2010-03-29 11:48:09 +00:00
joxe	bd6cd03c1d	moved prefix to avoid compiler warning	2010-03-26 15:12:57 +00:00
nifi	9508d2c4d7	* Added configurable default number of transmissions for CSMA to use when not specified using packetbuf attributes (CSMA_CONF_MAX_MAC_TRANSMISSIONS). ... * Renamed packetbuf attribute PACKETBUF_ATTR_MAX_MAC_REXMIT to PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS where value 0 (attribute not set) means that default number of transmissions should be used.	2010-03-26 12:29:29 +00:00
joxe	bec1ccc57d	added support for all UDP port compressions in hc06	2010-03-26 10:28:51 +00:00
nifi	0ec8d499e4	Bug fix: only call subscriber if set	2010-03-25 19:30:44 +00:00
adamdunkels	a4f9e62295	Added a parameter to collect_open() that specifies whether or not the node should be a router for packets, or only an originator of packets. Updated the collect module to the new annoucement API.	2010-03-25 08:51:07 +00:00
adamdunkels	2559e27414	API change to the announcement module: an annoucement can now be registered without a value. Such announcements are never transmitted to neighbors, until the announcement's value is set.	2010-03-25 08:49:56 +00:00
adamdunkels	4d68bdf74b	Bugfix and addition by Dogan Yazar: psock_readbuf() shouldn't wait for a full buffer (which might never happen); a new function for sending strings that batches data and sends full buffers instead of individual strings.	2010-03-24 21:03:32 +00:00
nifi	c623616afd	Neighbor state notification also when adding new neighbors	2010-03-24 16:29:45 +00:00
nifi	052c8db9f9	Added option for neighbor state changed notifications	2010-03-24 16:16:33 +00:00
joxe	4a6c6b0534	added route_rm_by_nexthop and small code cleanup	2010-03-23 14:21:04 +00:00
fros4943	95e870cc46	bugfix: structs should be declared static	2010-03-22 11:32:29 +00:00
nvt-se	0eae63b29a	Set a higher start ETX. Avoiding adding a neighbor after a failed packet transmission.	2010-03-19 16:55:29 +00:00
adamdunkels	9d06d84255	Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module	2010-03-19 13:25:15 +00:00
adamdunkels	49009e9cbd	Extend the length of announcement packets if they are too short	2010-03-19 13:24:58 +00:00
adamdunkels	2e8bfa5d9a	Include new broadcast-announcement and renamed collect-neighbor in compilation	2010-03-19 13:21:24 +00:00
adamdunkels	f2c9b3e813	Remove old neighbor.h inclusion	2010-03-19 13:20:40 +00:00
adamdunkels	3a5be4a7e4	Added broadcast announcement module and collect-neighbor module	2010-03-19 13:17:55 +00:00
adamdunkels	14453e9fb7	Slight API change to support bump functionality	2010-03-19 13:17:31 +00:00
adamdunkels	7b0606cd58	Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module	2010-03-19 13:17:00 +00:00
adamdunkels	137e02baac	Added a bump method that tells the announcement module that a value has changed sufficiently much for it to be pushed out quicker	2010-03-19 13:16:11 +00:00
adamdunkels	17db783fb0	Broadcast announcement back-end that sends announcement data as broadcasts, with increasing transmission intervals	2010-03-19 13:15:19 +00:00
nifi	7f7922a10d	typos	2010-03-19 12:54:38 +00:00
joxe	cf9acf4748	made it possible to have zero contexts to avoid stateful compression in hc06	2010-03-19 08:15:20 +00:00
joxe	17a721a7e4	fixed buggy define for Traffic class and Flowlabel compression	2010-03-17 20:57:25 +00:00
adamdunkels	115b3a7c5c	Minor timing bugfix: the time between channel checks should not include the time required for the channel check itself	2010-03-17 18:24:06 +00:00
adamdunkels	efeb9944fa	Increase the required non-activity periods before turning off the radio; remove the strict phase requirement (which messes up things with low-power streaming)	2010-03-17 16:35:52 +00:00
nvt-se	1a9e00ab78	Purge neighbors that go over a configurable ETX limit. Increase the no-ACK penalty.	2010-03-17 15:08:46 +00:00
nvt-se	4e0ceedc47	Enabled external neighbor removal	2010-03-17 15:00:52 +00:00
fros4943	55f780ec19	removed debugging output	2010-03-17 14:36:46 +00:00
joxe	4f27fcf766	added ipaddr variable if not UIP_ROUTER is defined	2010-03-17 12:30:25 +00:00
joxe	e8916fe01f	added hooks for adding an external header compressor	2010-03-17 12:08:59 +00:00
joxe	d113577a8e	made UIP_ND6_SEND_RA configurable from platforms and projects	2010-03-16 18:27:22 +00:00
adamdunkels	36b995cc9a	Reenabled announcement support	2010-03-16 18:12:34 +00:00
adamdunkels	9be1a65211	Don't set the RELIABLE flag on incoming packets with the ack requested flag set, since it is set on most packets even if they aren't reliable	2010-03-16 18:11:58 +00:00
adamdunkels	b1feac5a00	Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100%	2010-03-16 18:11:13 +00:00
nifi	6b7ec2d002	removed uip_router	2010-03-16 15:45:20 +00:00
nifi	75091661e6	fixed typo	2010-03-16 15:41:00 +00:00
joxe	b4adc6bcb5	added fallback interface and removed uip_router	2010-03-16 15:35:03 +00:00
joxe	2b44f809fb	added support for extending route entries	2010-03-16 14:11:46 +00:00
joxe	453cf7f2e6	refactoring of hc06 code	2010-03-16 10:21:04 +00:00
nvt-se	7f687b99e6	Debug off by default	2010-03-15 19:22:29 +00:00
joxe	fd3d6c44d0	integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling	2010-03-15 16:41:24 +00:00
adamdunkels	a9bad71fbd	Increased the number of bits that repressent the MAX_RETRANSMITS attribute to allow for more than 7 hop-by-hop retransmissions	2010-03-14 23:01:12 +00:00
adamdunkels	7bab9316da	Two major changes: ... * Low-power streaming. Experimental support for a low-power mode which allows rapid exchange of packets with a 16% duty cycle. Does not seem to function correctly yet though. * Phase locking. When the phase of a neighbor has been detected, the sender assumes that the neighbor will keeps it phase and does not send more strobes than necessary to hit the receiver's channel check - even if the receiver does not acknowledge the reception of the strobes when it should have been awake. Instead, the sender stops strobing and tries again at a later time.	2010-03-14 22:59:23 +00:00
oliverschmidt	def540e6c0	Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments. ... There were btw other even longer lines with expansions of the same macro already present.	2010-03-14 12:13:54 +00:00
joxe	e8bd53cfd8	added typedef of icmp6_error	2010-03-13 09:25:24 +00:00
dak664	0236c6e725	Leave compiler warning for 16 bit timers	2010-03-12 17:51:07 +00:00
joxe	4c2daf9886	started integration of Mathildes and Juliens new uip6 code + made some ND timers configurable	2010-03-12 16:19:19 +00:00
dak664	7c5eed6bda	Add includes needed by AVR-gcc, fix compiler warning	2010-03-12 15:23:57 +00:00
dak664	52c9f4bde3	Remove compiler warning	2010-03-12 15:21:14 +00:00
nifi	2cf0fb9cce	Changed to use short address mode with short rime addresses	2010-03-12 14:49:21 +00:00
nvt-se	6be0bac1a1	minor include fix + added documentation	2010-03-12 13:40:13 +00:00
nvt-se	881fac7f50	fixed comment	2010-03-12 13:25:14 +00:00
nvt-se	6ce15b14c9	prepend net/ to include paths	2010-03-12 13:23:50 +00:00
nvt-se	c316fc2fa9	Make it possible to provide feedback to the neighbor modules	2010-03-12 13:20:13 +00:00
nvt-se	814dd8bf59	Added generic modules for neighbor information.	2010-03-12 13:19:45 +00:00
joxe	d75ec2da53	fixed so that uip6 sends icmp6 errors from correct source when acting as router - improves support for tracert, etc.	2010-03-11 18:07:37 +00:00
adamdunkels	90bb63a383	Set the (correct) packet attribute to let the MAC layer perform retransmissions	2010-03-09 20:40:50 +00:00
adamdunkels	4b60301727	Don't set the ack flag for broadcast packets	2010-03-09 20:40:11 +00:00
adamdunkels	17f6b3a324	Simplified the structure of the code	2010-03-09 20:38:55 +00:00
adamdunkels	d0e6436a20	Don't call up the netstack if the transmission was deferred	2010-03-09 20:37:02 +00:00
c_oflynn	dc3e6c1877	Fix TC/FL errors in hc-06. Need to verify further	2010-03-09 16:19:44 +00:00
joxe	48a9bff889	added support for dropping packets if hop limit is reached	2010-03-09 15:50:15 +00:00
c_oflynn	1d483a5da4	Fix UDP compression to work per hc-06. More commits to come to fix Traffic Class stuff...	2010-03-09 15:18:03 +00:00
adamdunkels	edda6dd86c	Minor bugfix: don't subtract collisions and deferrals from the number of transmissions	2010-03-09 13:23:58 +00:00
adamdunkels	5a6fc2ade0	Bugfix: set up rtmetric before starting to announce it. Set the number of MAC layer retransmissions correctly	2010-03-09 13:21:28 +00:00
adamdunkels	2c3d3e3d73	Bugfix: handle deferred transmissions correctly (don't count them)	2010-03-09 13:20:08 +00:00
adamdunkels	79722b4247	Rework of the timing conditions of ContikiMAC: the old timing did not work well on real hardware, the new one seems to work better	2010-03-09 13:19:05 +00:00
nvt-se	96eb20d235	forward arguments even if REXMIT is not set	2010-03-04 14:17:43 +00:00
dak664	c65e09ceb2	Remove compiler warnings	2010-03-02 15:41:23 +00:00
nifi	5e43a6998b	Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.	2010-03-01 13:30:21 +00:00
nifi	0c084b8c68	added random init of sequence number	2010-03-01 13:17:01 +00:00
adamdunkels	524625dfd2	Removed debug string names of packet attribtues	2010-02-28 20:20:19 +00:00
adamdunkels	410d860a93	Improved handling of neighbor phase estimation: instead of busy-waiting while waiting for neighbor's phase, the new code schedules a timer just before neighbor wakes up	2010-02-28 20:19:47 +00:00
adamdunkels	e6fceb7200	Added MAC-layer return value to indicate that a packet transmission was deferred	2010-02-28 20:18:30 +00:00
adamdunkels	ec928a2a19	Make max queueing time depend on retransmission timeout	2010-02-28 14:15:58 +00:00
adamdunkels	e06acc4525	Prod the watchdog if waiting for along time	2010-02-28 14:15:16 +00:00
adamdunkels	74da90a06b	Don't count collisions as transmissions	2010-02-28 10:07:17 +00:00
adamdunkels	f95a6cce85	Added function for obtaining packet queue length	2010-02-28 09:20:32 +00:00
adamdunkels	8fe15f7b45	New packet attribute for specifiying MAC layer retransmissions; reorder and commented packet attributes	2010-02-28 09:19:43 +00:00
adamdunkels	970a9eb9c7	Increased neighbor lifetime to allow for longer neighbor announcement intervals	2010-02-28 09:19:04 +00:00
adamdunkels	7165a3866f	Significant rework of the Contiki data collection protocol: ... * the new version makes use of MAC-layer feedback so that bad paths can be identified quicker and then avoided. * the new code uses transport layer ACKs that contain feedback from the collect protocol: when a packet cannot be forwarded due to lack of resources, the ACK contains a flag that indicates that the packet could not be forwarded. ACKs also contain the routing metric of the sender, which improves agility in face of rapid path changes. * loop detection and management has been improved: with higher path metric agility, the system is more prone to short-lived routing loops. Instead of dropping looping packets, the new version adjusts the routing metric for the routes that exhibit loops so that the risk for future loops is reduced. * make use of packet attributes to inform the MAC layer of how many times packets should be retransmitted.	2010-02-28 09:18:01 +00:00
adamdunkels	b6b4941871	Made the number of MAC-layer retransmissions configurable on a per-packet basis, via a packet attribute	2010-02-28 08:35:16 +00:00
adamdunkels	ed88f487c8	Improved detection of link-layer ACKs; increased the time ContikiMAC waits when it has detected a link-layer ACK; increased the number of silence periods required to detect a CCA false positive	2010-02-28 08:33:21 +00:00
adamdunkels	fa1a96636e	Bugfix: the compile-time check for UIP_LLADDR_LEN previously generated a run-time error, when it should have generated a compile-time error	2010-02-28 08:30:39 +00:00
adamdunkels	ba0e50a7b7	Set the default number of MAC layer retransmissions for IPv6 packets to 2	2010-02-28 08:29:42 +00:00
joxe	0ab2bc9a31	upgraded sicslowpan to hc-06 - no 48 bit multicast compression support yet	2010-02-25 15:50:58 +00:00
nifi	b50d47fb80	added missing function in sicslowmac_driver	2010-02-23 22:45:11 +00:00
nifi	1cfcc8a73a	Removed the combined name of CSMA and NETSTACK_RDC. The name of NETSTACK_RDC can be accessed separately if needed.	2010-02-23 20:42:45 +00:00
nifi	c20047f657	Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration.	2010-02-23 20:09:11 +00:00
adamdunkels	bb62749de7	Made debug printfs optional	2010-02-23 18:49:58 +00:00
adamdunkels	0ab2ba433f	Bugfix: the wrong callback pointer was passed to higher layers.	2010-02-23 18:49:45 +00:00
adamdunkels	ed52586e18	Rework of parts of the ContikiMAC code based on input from experimental results. When channel check is triggered because of a false positive, the new version checks the radio several times to make sure that there really is an incoming packet. Otherwise, the radio is switched off. Cleaned up and removed old unused code. Added a few temporary debugging mechanisms and functions.	2010-02-23 18:49:05 +00:00
adamdunkels	ca0417a923	Added the MAC layer callback functionality so that the Rime network layer gets information from the MAC about the status of sent packets: were they successfully transmitted, or was there a collisions? How many retries were there?	2010-02-23 18:38:05 +00:00
adamdunkels	f10eedab3e	Added debug printout	2010-02-23 18:37:15 +00:00
adamdunkels	2d13fecea7	Improved backoff management: timer is now doubled on every transmission, until the using module calls the neighbor_discovery_start() function again. Don't cancel the transmission even if a lower value arrives (this fixes a problem with multi-hop ETX propagaion).	2010-02-23 18:36:50 +00:00
adamdunkels	0eade2886c	Better loop handling: when a loop is detected, the neighbor to which the packet was originally sent gets an inflated ETX; made sure that collect without announcments work; increased timeouts, to work nicer in larger networks	2010-02-23 18:35:23 +00:00
adamdunkels	a4d9d6651b	Added the option to specify the old value to observers so that they can determine if the announcement should be sent out quicklier than otherwise	2010-02-23 18:32:44 +00:00
adamdunkels	b746b7fc06	Reworked the Rime/Chameleon interface so that packets now always hit Rime before Chameleon. Chameleon is now only called by Rime. This makes packet sniffing easier, and allows for sniffing packets after their header has been processed by Chameleon, thereby making per-packet power profiling much easier to implement	2010-02-23 18:29:53 +00:00
adamdunkels	d8cce42d28	Set the default radio driver to nullradio	2010-02-23 18:28:04 +00:00
adamdunkels	0b2b7bcdba	Removed inadvertedly left-over include file	2010-02-18 23:52:34 +00:00
adamdunkels	5cf3b83733	Common initialization code for the netstack	2010-02-18 23:15:26 +00:00
adamdunkels	f49ebfe1c4	Temporarily disabled rime route udp because it breaks with newest MAC interfaces	2010-02-18 21:53:08 +00:00
adamdunkels	e34eb54960	A work-in-progress rework of the Contiki MAC and radio layers. The ... main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.	2010-02-18 21:48:39 +00:00
adamdunkels	f8c804e28b	ntikiMAC: a new radio duty cycling mechanism that uses a combination ... of link-layer and MAC-layer mechanisms to achieve a very low power consumption: during idle listening the radio is switched off between 99.2% and 99.6% of the time. One unicast transmission typically adds between 0.07% and 1.2% additional radio time, depending on packet size. ContikiMAC uses the standard IEEE 802.15.4 message format and adds no additional headers. ContikiMAC is simple: it uses periodic two-shot channel sampling during idle listening to keep the radio on-time down. Transmissions are done with repeated transmissions until a link-layer ACK is received.	2010-02-18 21:26:15 +00:00
adamdunkels	f5c48751b5	Reworked 802.15.4 header creation and parsing so that it works regardless of the size of the rimeaddr_t typedef	2010-02-18 21:00:28 +00:00
adamdunkels	2fbf21b2b3	Refactored the phase optimization functionality into a separate module	2010-02-18 20:58:59 +00:00
adamdunkels	515a391ee4	Removed left-over debug printfs	2010-02-15 23:31:05 +00:00
dak664	bb9afb4fb1	Remove compiler warning	2010-02-15 20:49:38 +00:00
adamdunkels	4bb0375251	Buffer name definition bugfix	2010-02-15 19:23:54 +00:00
adamdunkels	9bb149ca13	Bugfix by Raimondas Sasnauskas: TCP SYN duplicate receptions in the SYN_RCVD state was not correctly handled	2010-02-15 18:03:07 +00:00
adamdunkels	d67d1f7340	Major bugfix, found by Raimondas Sasnauskas: the TCP periodic timer was not started when a new connection request arrived. If there were no other active TCP connections, this means that the SYNACK would never be retransmitted, potentially leading to a forever stale TCP connection.	2010-02-09 12:58:53 +00:00
adamdunkels	4a522c96dd	Added debugging statements for packet drops	2010-02-08 21:59:49 +00:00
adamdunkels	2b6a651233	Added missing include, made debug statement more explicit	2010-02-08 21:59:21 +00:00
adamdunkels	2eba08e8f6	Made queuebuf statistics configurable, and off by default	2010-02-08 21:10:32 +00:00
adamdunkels	b98f7d891f	Bugfix: added missing queuebuf allocation	2010-02-06 20:50:24 +00:00
adamdunkels	671216c558	No need to clear the headers now that we explicitly save a queuebuf when sending fragments	2010-02-06 17:07:43 +00:00
adamdunkels	b6647b5630	Turns out that with cxmac, clearing the header after sending a packet is not enough to make fragmentation work. Instead, we allocate a queuebuf and restore the packet after from the queuebuf after sending it.	2010-02-06 09:42:49 +00:00
adamdunkels	494e692d0b	Bugfix: clear the header after sending a packet solves a problem with fragmentation; also prod the watchdog since fragment transmissions can take a long time with some low-power MAC protocol	2010-02-06 07:49:58 +00:00
adamdunkels	a68b4c40c4	Added a function to clear only the header part of the packetbuf	2010-02-06 07:48:52 +00:00
oliverschmidt	e88d209214	Adjusted process name to title case.	2010-02-05 19:13:05 +00:00
nifi	a1199721a6	Changed to use separate Contiki event type for ICMP6 notifications	2010-02-05 12:43:36 +00:00
oliverschmidt	5e66abda50	Initialize lastport in all cases it is defined.	2010-02-04 21:33:51 +00:00
adamdunkels	d8b0625e21	Bugfix: lastport must be defines both when UIP_ACTIVE_OPEN or UIP_UDP are defined (thanks Oliver!)	2010-02-04 21:14:45 +00:00
adamdunkels	7bcb106fa9	Disable the stream mode for TCP packets since it does not seem to work reliably with cxmac	2010-02-04 18:57:33 +00:00
adamdunkels	13f6673d04	Bugfix: drop incoming TCP and UDP packets where port numbers are zero	2010-02-04 11:17:42 +00:00
adamdunkels	d7b7b05d0e	Moved the neigbor_init() call to the collect module, since it is the only one that currently uses it	2010-02-03 20:38:33 +00:00
adamdunkels	75e1c0c8c7	Include contiki-conf.h to let the MAC channel check rate be configurable	2010-02-03 16:45:12 +00:00
adamdunkels	06d17c7e1c	Remove unused rtimer code	2010-02-03 16:44:43 +00:00
adamdunkels	4bffd277f5	Don't set the stream bit on outgoing TCP packets for now - it doesn't seem to play well with IPv6 and X-MAC	2010-02-03 16:44:19 +00:00
adamdunkels	36db5eb70b	Added debug printout	2010-02-03 01:18:24 +00:00
adamdunkels	e419eb3cc5	Retransmit packet if it didn't receive a MAC layer ack	2010-02-03 01:17:54 +00:00
adamdunkels	d68af249ec	Added a MAC layer return value that informs the caller that a packet did not receive a MAC layer acknowledgement	2010-02-03 01:17:32 +00:00
adamdunkels	4bc4f033e8	Increase the trickle resend interval for router advertisements	2010-02-03 01:13:17 +00:00
adamdunkels	181213124b	Added a configuration option for setting the MAC channel check rate (which must be a power of two). The configuration is independent of the MAC protocol.	2010-02-02 23:28:58 +00:00
adamdunkels	f66cd6d44e	Increased the forwarding queue to six packets to improve collection robustness	2010-02-02 21:44:05 +00:00
adamdunkels	901a128e7f	Reconfigured the timeouts to work better on top of a power-cycling radio mechanism	2010-02-02 21:12:29 +00:00
adamdunkels	28052c655f	Removed exit() calls that were unadvertedtly left in from testing	2010-02-02 21:10:38 +00:00
adamdunkels	0db31db624	Moved declarations to the start of each function	2010-02-02 21:09:06 +00:00
adamdunkels	fcf60e9260	Removed the csma_init declaration in the mac_driver struct since it isn't needed and it breaks sdcc	2010-02-02 20:45:58 +00:00
adamdunkels	cc2be0f111	Remove compiler warnings	2010-02-02 16:33:07 +00:00
adamdunkels	88c661b0c2	Rewrote the netif time code so that is avoids the use of floating point numbers; some code style fixes	2010-02-02 16:32:03 +00:00
adamdunkels	1a13d25d33	Revised version of the X-MAC implementation that uses a ctimer instead ... of an rtimer for the periodic radio duty cycling. The benefit of this implementation is that it leaves an rtimer free for user tasks. The drawback is a slightly higher idle power consumption. This new version is based on the current rtimer-based X-MAC.	2010-01-31 18:44:23 +00:00
adamdunkels	e4168db633	Bugfix: deallocate queuebuf only if there was no collision	2010-01-31 13:55:36 +00:00
adamdunkels	388c5d4244	Made the sicslowpan MAC layer reachable from outside modules	2010-01-28 13:50:51 +00:00
adamdunkels	2ae7ed827c	Increase the default X-MAC channel check rate to 4 Hz instead of 2 Hz	2010-01-28 13:40:47 +00:00
adamdunkels	f94d6df6f0	Bugfix: copy the originator address from the packetbuf into a local variable to avoid it being overwritten	2010-01-27 08:12:56 +00:00
adamdunkels	8430dab039	Typecast to fix nightly build problem	2010-01-27 07:36:31 +00:00
adamdunkels	9e5823f060	Made retransmission timeout configurable	2010-01-26 10:19:26 +00:00
adamdunkels	b728c0927c	Made number of duplicate announcements configurable	2010-01-26 10:18:55 +00:00
adamdunkels	cc3f609eaa	Bugfix for alignment issue. Added mechanism that allows five duplicate announcements before suppressing one's own.	2010-01-25 13:55:17 +00:00
adamdunkels	71ffde578e	Moved route_init() into mesh instead of the generic rime initialiation	2010-01-25 13:54:26 +00:00
adamdunkels	423e37f426	Added parameter to ipolite that specifies how many dups that are acceptable, before suppressing one's own packet	2010-01-25 13:54:06 +00:00
adamdunkels	0b58ca3b22	Bugfix: split full size TCP segments if they match the MSS definition, not only the buffer size definition	2010-01-25 13:53:15 +00:00
adamdunkels	7615a6cf47	Bugfix by Henrik Mäkitaavola: check that ICMP6 process is defined before invoking it	2010-01-25 13:37:05 +00:00
adamdunkels	4f3e8d565c	Added a simple CSMA (Carrier Sense Multiple Access) mechanism that ... works on top of an underlying duty cycling mechanism. The CSMA layer retransmits packets that could not be sent because of a collision was detected.	2010-01-25 11:46:44 +00:00
adamdunkels	7ad93e5d18	Added a field to the struct mac interface: ... channel_check_interval(). This function returns the interval by which the duty cycling mechanism checks the radio channel for activity. It is used by higher layer mechanisms to determine suitable timeouts for retransmissions.	2010-01-25 11:43:32 +00:00
fros4943	26e0bab11a	bugfix: alignment problem caused by previous bugfix	2010-01-21 11:39:35 +00:00
fros4943	3db4f36c3e	removed compiler specific attribute	2010-01-20 09:58:16 +00:00
adamdunkels	c962f49516	Alignment bugfix	2010-01-18 21:27:21 +00:00
adamdunkels	743e93e650	Do not remove encounters - there is no need to, as they are only an optimization	2010-01-14 20:14:03 +00:00
nvt-se	a03e899c27	Signal the result of transmissions attempts made in the mesh module. Patch from Moritz Struebe	2009-12-18 14:57:15 +00:00
nifi	7b2b93e6e6	clear transmission flag if send failed	2009-12-18 14:49:42 +00:00
adamdunkels	f4e6758b22	Use RTIMER_NOW() instead of rtimer_arch_now()	2009-12-09 18:08:26 +00:00
adamdunkels	2f105e933a	Variable xmac_is_on was used both in interrupt and non-interrupt contexts and needs to be volatile	2009-12-06 23:29:38 +00:00
adamdunkels	53457eb1f0	Fixed compilation warning	2009-12-06 17:10:54 +00:00
adamdunkels	8bcc838d8a	Bugfix: don't set the 'we are sending' flag until we are actually sending	2009-12-06 17:05:45 +00:00
adamdunkels	6897270289	Bugfix to the Contiki LPP encounter timing code: encounters are now ... properly timed.	2009-12-06 13:18:32 +00:00
adamdunkels	822149f943	Significant improvements to the Contiki X-MAC: ... * the code is simplified, particularly the duty cycling logic * old unused code has been removed * Contiki X-MAC now listens before sending a strobe to avoid MAC-level collisions * broadcasts are sent directly, without strobes, reducing the power consumption of receivers * turn off radio for 1 ms between sending a strobe and expecting the strobe ack	2009-12-06 13:16:59 +00:00
adamdunkels	cef2e65c9b	Added an error type for signalling a MAC-layer collision	2009-12-05 21:49:51 +00:00
adamdunkels	4a1a823a49	Code style fix	2009-12-05 13:29:41 +00:00
fros4943	a1b4597b95	fixed announcement compilation error	2009-11-27 14:27:50 +00:00
adamdunkels	aeefa75304	Fixed alignment problems in announcement packet creation	2009-11-27 12:49:27 +00:00
nvt-se	116771adbc	made the route cache timeout configurable	2009-11-20 14:35:58 +00:00
nifi	1f2c226d8e	* Added ctimer_restart(). Patch by Moritz Struebe. ... * Added ctimer_expired().	2009-11-19 18:32:05 +00:00
nifi	bb0ffe0478	moved rime initialization into rime router so it is easier to switch IPv6 routing module	2009-11-18 13:51:55 +00:00
fros4943	0034fd7bca	generic return values for sent packet	2009-11-13 10:09:02 +00:00
fros4943	9b20f11cd8	chameleon returns 1 only on successful rime_output()	2009-11-13 09:14:52 +00:00
fros4943	583dd11c55	rime_output() now returns RIME_OK or RIME_ERR depending on the MAC return value. ... this patch may affect Rime sniffers running on top of MAC protocols that do not yet return generic MAC return values	2009-11-13 09:10:24 +00:00
fros4943	26bb5ecd21	added radio and MAC generic return values to allow applications finding out whether the packet was transmitted	2009-11-13 08:59:22 +00:00
joxe	5b0b36c39e	accept messages to all routers if UIP_CONF_ROUTER is set.	2009-11-12 14:05:42 +00:00
adamdunkels	60a3fc0cae	Fixed alignment issue	2009-11-09 08:22:40 +00:00
adamdunkels	56218aba3b	Made rimeaddr_t pointers const where they should be.	2009-11-08 19:40:16 +00:00
adamdunkels	70fc23ac7e	Enable stream mode by default, remove LED debug mode	2009-11-04 16:02:45 +00:00
adamdunkels	5aab2eb77d	A simple addition with significant performance implications: ... sicslowpan tags TCP packets with the PACKETBUF_ATTR_PACKET_TYPE_STREAM flag, which makes the underlying power-saving MAC layer keep the radio on for some time after transmitting the packet. This allows reply packets to be processed directly, significantly increasing TCP latency and throughput.	2009-11-02 11:58:56 +00:00
adamdunkels	c7a91ad4a2	Bugfix: UIP_TCP_BUF -> BUF	2009-10-27 23:09:58 +00:00
adamdunkels	631af06c7c	Bugfix: Active TCP connections in uIP are made by first setting up the ... TCP connection state, then poll uIP to send out the first SYN. Until now, however, the SYN was not sent as part of the poll, but at the first retransmission. This is now fixed.	2009-10-27 22:34:08 +00:00
zhitao	1913e1a936	prevent neighbor ETX from wrap-over	2009-10-22 13:11:20 +00:00
nifi	df32fde58c	Made max number of neighbors configurable	2009-10-21 21:25:10 +00:00
adamdunkels	91579fbaab	Removed debug strings to save ROM	2009-10-20 08:06:43 +00:00
nifi	223fa1c8e5	added missing include	2009-10-20 07:42:03 +00:00
adamdunkels	a5ea7ef966	Increased default number of queue buffers	2009-10-19 21:28:59 +00:00
adamdunkels	4d9b05c2ce	Increased default header size in packetbuf to accomodate 802.15.4 headers	2009-10-19 21:28:11 +00:00
adamdunkels	7cdfbca973	Alignment problems with announcements fixed	2009-10-19 21:27:02 +00:00
adamdunkels	9ec57d61ad	Added MAC layer framing support to X-MAC so that packets now are standard 802.15.4 frames	2009-10-19 20:53:56 +00:00
adamdunkels	4de1816e36	Added a new module called "framer" that creates MAC level frames to ... the packetbuf from packet attributes. Two framer modules are included, one that creates 802.15.4 frame headers, and one that creates a minimal "nullmac"-style header that only contains the link-local addresses.	2009-10-19 18:30:03 +00:00
nifi	ae226c5917	* Set sender and receiver packet attributes on incoming packets ... * Added link layer destination check	2009-10-19 11:25:54 +00:00
adamdunkels	10c873018d	Ensure that DEFAULT_PERIOD is != 0, to avoid a modulo with 0	2009-10-19 06:39:29 +00:00
adamdunkels	f25856a387	Hack to be able to receive UDPv4 multicast packets	2009-10-18 22:03:44 +00:00
adamdunkels	fb037e0afb	Added function for sending an UDP packet to a specified IP address and port number over an existing UDP connection	2009-10-18 22:02:01 +00:00
adamdunkels	9d26bd663e	A new optimization to X-MAC: senders now keep track of when neighbors ... last were known to be awake. When sending a packet, a sender does not start to send strobes until the neighbor is expected to be awake. This reduces power consumption for senders and decreases the contention in the network as there are less packets in the air. Additionally, the ACK optimization was improved so that data/ack exchanges now are more efficient.	2009-10-18 13:19:25 +00:00
nvt-se	31f41d842e	* decline route discovery requests if we have one in the air ... * and, by popular demand, switched PRINTF to printf in the debug macro. :-)	2009-10-08 16:30:26 +00:00
nvt-se	f143227205	made the route discovery packet timeout configurable.	2009-09-29 16:02:28 +00:00
nifi	0ad51b8dcc	Moved the link layer destination check to sicslowmac	2009-09-18 16:37:17 +00:00
adamdunkels	1980253ba3	Refresh routes when hearing a packet from a neighbor	2009-09-09 21:10:21 +00:00
adamdunkels	786ed3cf84	Fixed sdcc compiler problem: function pointers cannot be NULL, so added a dummy function instead	2009-09-09 21:09:42 +00:00
adamdunkels	2181e90f69	Added the possibility to switch lpp off. Fixed sdcc compiler issue	2009-09-09 21:09:23 +00:00
adamdunkels	1cafbc6002	sdcc compiler issue fix: compound assignments are not supported, so we use memcpy() instead	2009-09-09 21:08:46 +00:00
nvt-se	4d21a3e203	Don't assume that radio->send turns on the radio automatically.	2009-09-04 10:59:30 +00:00
oliverschmidt	e60db62b10	Added prototype missing for quite some time now - do we need -Werror ?	2009-08-20 20:27:17 +00:00
adamdunkels	522f991f14	Set sender and receiver packet attributes on incoming packets: patch by Gidon Ernst	2009-08-20 18:59:17 +00:00
dak664	c1b7375a5a	*** empty log message ***	2009-07-23 16:13:48 +00:00
dak664	2166261890	Separate input and output debug PRINTFs	2009-07-10 13:33:45 +00:00
nvt-se	38fff1b527	mac_driver structure has been changed to include the init function.	2009-06-24 16:31:49 +00:00
nifi	912aba7280	added init function in MAC driver for easier configuration	2009-06-22 11:14:11 +00:00
nvt-se	33909cc2fd	made neighbor discovery method configurable. default is announcements.	2009-05-30 19:54:05 +00:00
nvt-se	83f2b9ae57	include ctimer.h, since ctimer's are used in the neighbor_discovery_conn struct.	2009-05-30 19:40:39 +00:00
nvt-se	9277f922f1	fixed some documentation typos. ... also uc -> unicast, stuc -> stunicast.	2009-05-26 13:58:53 +00:00
nifi	f39d2bd4c6	Fixed link panid for broadcasts to be standard compliant. Ignore packets addressed to other non-broadcast panids.	2009-05-26 12:08:29 +00:00
nvt-se	e2bbdbca9b	decrement TTL right after forwarding check.	2009-05-19 11:54:50 +00:00
adamdunkels	5308a09dd3	Added debug output	2009-05-10 21:10:23 +00:00
adamdunkels	02734c9806	Bugfix: must copy the sender and receiver addresses from the packetbuf buffer, otherwise an application program may overwrite them	2009-05-10 21:10:02 +00:00
adamdunkels	fe5a1f1068	Added an optimization option that avoids multiple simultaneous broadcasts from neighbors: when a broadcast is to be sent, a sender does not send until it knows that no other nodes are broadcasting.	2009-05-10 21:09:05 +00:00
adamdunkels	fe30886b37	Added functionality for decaying routes: when a packet is sent over a route, it is decayed. If the route is not refreshed within four packets (with the route_refresh() function, which is called when a new packet arrives), the route is dropped. A route can be decayed at most once per second	2009-05-10 21:08:01 +00:00
adamdunkels	6bf8e0b478	Bugfix by Takahide Matsutsuka: too few items in array, which caused problems with sdcc	2009-05-08 08:52:55 +00:00
zhitao	48d4800f08	removed reference to undefined function in mspgcc	2009-05-06 15:34:28 +00:00
adamdunkels	1d921ddf42	Explicit typecast to avoid compiler problems	2009-05-06 15:07:09 +00:00
adamdunkels	0adceb63b4	Code cleanup; made encounter optimization explicit; added optimization for adaptive off-time, but it currently seems to work bad with broadcasts	2009-05-06 15:06:38 +00:00
adamdunkels	9fff85757d	Code cleanup; made strobe transmission time longer again (seems to work better in cooja?)	2009-05-06 15:05:28 +00:00
adamdunkels	a671ea1146	Documentation fix	2009-05-06 15:04:20 +00:00
zhitao	58940ecbf8	minor documentation fixes	2009-05-06 08:37:48 +00:00
adamdunkels	1752b53f74	Refresh routes when a packet is received. Set a conservatively low route timeout (10 seconds).	2009-05-04 11:24:04 +00:00
adamdunkels	c83c5c4c55	Removed automatic refresh of routes from the route_lookup() function and moved it into an explicit route_refresh() function. The previous behaviour was dangerous, since it meant that even bad routes that someone was looking for were considered fresh. Now such routes time out if they are not explictily refreshed (e.g., on a packet reception)	2009-05-04 11:23:30 +00:00
adamdunkels	f5a57a4e54	Fixes by Ward Van Heddeghem (reapplied from versioin 1.24)	2009-04-30 20:21:06 +00:00
adamdunkels	e70cf0c7c6	Rewrite of the collect module. The new version uses a packet queue for outgoing and forwarded packets so that more than one packet can be forwarded at the same time. The new version uses the packetqueue module to maintain the packet queue.	2009-04-29 20:48:57 +00:00
adamdunkels	c489b1118d	New module: packetqueue. The packetqueue module maintains packet queues for other modules.	2009-04-29 20:47:30 +00:00
adamdunkels	cc44e89415	Reduced default strobe time, which seems to work well. Avoid running the interrupt if the power-save feature is turned off (fixes problems with serial data reception on a gateway mote)	2009-04-29 11:42:13 +00:00
adamdunkels	c02a82ac41	Tag outgoing TCP packets with the ERELIABLE attribute so that an underlying power-saving MAC protocol can treat them differently, because it knows that an ACK might be arriving soon	2009-04-29 11:40:33 +00:00
adamdunkels	c9df0ab123	Bugfix in debug message printout	2009-04-28 14:01:46 +00:00
adamdunkels	81ef83b856	Added option to wait randomly before sending a packet. A few code cleanups. Avoid switching radio off when sending a packet with end-to-end acks, because an ACK may arrive shortly after the transmission.	2009-04-28 14:00:53 +00:00
adamdunkels	fdd05f5c71	Bugfix: psock send should use PT_WAIT_UNTIL() not PT_YIELD_UNTIL(). This improves TCP throughput by 100x under minimal-net	2009-04-28 13:52:04 +00:00
fros4943	7810d362a6	minor bugfixes: a rucb sender could not immediately after start receiving a bulk transfer	2009-04-16 14:32:01 +00:00
nvt-se	c0fb680f12	simplified code by using udp_broadcast_new.	2009-04-13 19:55:15 +00:00
nvt-se	9765df97e5	support udp_broadcast_new also when using IPv6. Suggested by Wolf-Bastian Pttner.	2009-04-13 19:54:07 +00:00
adamdunkels	ef4f5cc0e5	Made TCP MSS configurable	2009-04-10 00:37:48 +00:00
nifi	84b38de494	removed bitfields for compatibility with cc65	2009-04-09 21:54:09 +00:00
adamdunkels	f5f52ffd1f	Fixes by Ward Van Heddeghem (VUB)	2009-04-07 13:06:03 +00:00
nvt-se	03cd533712	made LISTEN_TIME and OFF_TIME configurable.	2009-04-07 11:29:08 +00:00
adamdunkels	5e456aea7d	Added optimization for sending ACKs immediately. Turned optimizations on. Increased listening time to 1/64 s again due to problems with broadcasts with the 1/128 s setting	2009-04-06 22:50:35 +00:00
adamdunkels	ace6567815	Added a timer that randomizes the retransmission of an incoming new trickle version to avoid broadcast collisions	2009-04-06 21:20:35 +00:00
adamdunkels	be1c8ccec9	Added debug printouts	2009-04-06 21:19:34 +00:00
adamdunkels	d02ac74bbc	Increased size of temporary stack value to avoid overflowing when computation is done with 8-bit integers	2009-04-06 21:19:00 +00:00
nifi	000f740adc	typo	2009-04-06 15:54:07 +00:00
nifi	eab96e9b53	added rime-udp.c	2009-04-06 14:10:57 +00:00
nvt-se	d6869018c7	turned off debugging.	2009-04-06 13:27:37 +00:00
nifi	9f2ff48fda	added 802.15.4 frame packeter	2009-04-06 13:19:03 +00:00
nvt-se	3b2ad9cfc4	added packet forwarding and replaceable routing modules.	2009-04-06 13:18:50 +00:00
nvt-se	461ba4082c	in case UIP_CONF_ROUTING is set, check if we have a registered routing ... module and use it for looking up the next hop of an address.	2009-04-06 13:18:12 +00:00
nvt-se	faf083f09d	save copy of a rime address that points to a packet buffer, since the ... packet buffer is cleared and overwritten before the address usage is done.	2009-04-06 13:16:39 +00:00
nvt-se	c531f25c94	A module that enables Rime to run over UDP.	2009-04-06 13:13:26 +00:00
nvt-se	005578a722	added multihop routing support through replaceable modules. first implementation ... uses rime's route discovery by translating between ipv6 and rime addresses.	2009-04-06 13:11:25 +00:00
nifi	4bc60d76d3	fixed alignment problem on MSP430 when using compression	2009-04-06 13:11:20 +00:00
adamdunkels	ed1e945e66	Added guard code so that OFF_TIME is never zero	2009-04-03 20:08:05 +00:00
adamdunkels	8dbd2b2337	Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer.	2009-04-03 19:59:22 +00:00
adamdunkels	1d86b01bfb	Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time.	2009-04-03 11:45:06 +00:00
adamdunkels	04101aae36	Fixed alignment problem on the MSP430, where the LPP header may be misaligned	2009-03-31 17:39:54 +00:00
nvt-se	e2cc8b2a3e	send all queued packet once we have the chance.	2009-03-31 14:44:13 +00:00
nvt-se	1d47e2a8da	send immediate probes only if the packet is directed to us. ... sleep for OFF_TIME if the queue is empty. restrict double packet lifetime timeouts to unicast packets. stop ctimer in remove_queued_packet in case the function is not called via the ctimer callback. it could overwrite a valid packet otherwise.	2009-03-31 14:11:25 +00:00
nvt-se	dd082f7fcf	improvements to lpp based on code from Adam and discussions with Thiemo. ... * queue multiple packets * send a strobe back immediately after receiving a data packet * double the packet lifetime to allow for a missed probe	2009-03-31 12:47:00 +00:00
nvt-se	d8caaca289	listen time and off time parameters configurable from outside because cc1020 needs longer listen time.	2009-03-26 12:50:57 +00:00
adamdunkels	73fdf05940	Added const to constant parameters (rime addresses)	2009-03-24 07:15:04 +00:00
adamdunkels	a625d80259	Added explicit typecast to buffer definition	2009-03-24 07:14:12 +00:00
adamdunkels	ec1677ca6c	Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac	2009-03-23 21:06:26 +00:00
adamdunkels	1cbc0f4ea9	Send announcement packets only if there are any announcements to send	2009-03-23 21:00:25 +00:00
adamdunkels	f4b8680174	Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary.	2009-03-23 19:37:45 +00:00
adamdunkels	39af9b361d	Fixed minor bug in comment	2009-03-23 16:39:09 +00:00
adamdunkels	21e0900d18	Made constant addresses const	2009-03-23 16:22:02 +00:00
adamdunkels	143bf11548	The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers	2009-03-23 16:20:37 +00:00
adamdunkels	c791d851bb	Send an announcement packet only if there are more than zero announcemnets	2009-03-23 16:19:03 +00:00
nifi	91fa18e0e6	removed unused prototype	2009-03-23 10:58:00 +00:00
nvt-se	cc85a36722	use u8 when writing rime addresses.	2009-03-21 20:53:06 +00:00
nvt-se	4b6c110706	fixed documentation typos.	2009-03-17 20:28:44 +00:00
nifi	f0e56df2eb	fixed compiler warning when timesynch is disabled	2009-03-17 09:57:01 +00:00
nvt-se	13b364bcc1	fixed documentation typos.	2009-03-15 20:29:04 +00:00
nvt-se	41ca9516a7	fixed documentation typos.	2009-03-15 20:21:16 +00:00
adamdunkels	fb8fab739a	Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).	2009-03-12 23:04:52 +00:00
adamdunkels	65eb5fd4e8	Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).	2009-03-12 21:58:20 +00:00
adamdunkels	537219bf27	Added a packet attribute to specify transmission power on outgoing packets	2009-03-11 20:33:17 +00:00
zhitao	f304941ab4	raise busy forwarding flag before sending	2009-03-10 14:07:41 +00:00
julienabeille	2a173b465a	more printing in debug mode	2009-03-10 08:00:59 +00:00
zhitao	1eb085834f	Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes.	2009-03-09 12:54:27 +00:00
adamdunkels	a1260c0c1f	Documentation updates	2009-03-08 21:43:24 +00:00
adamdunkels	366ad7bece	Added Rime documentation from the Rime/Chameleon paper (SenSys 2007)	2009-03-07 11:15:46 +00:00
zhitao	0a12098bd5	avoid ping pong packets during route disruption	2009-03-06 17:33:59 +00:00
adamdunkels	dc7491f810	Bugfix and optimization: X-MAC did not properly switch the radio off after sending a packet, resulting in increased power consumption. For packets that require an ACK, we can let the radio be on in anticipation of the ACK (controlled with an WITH_ACK_OPTIMIZATION option)	2009-03-05 19:37:52 +00:00
zhitao	64badeb282	bugfix: use memcpy() to get attributes longer than a byte properly written to packet header	2009-03-05 13:51:28 +00:00
zhitao	08b2315f41	bugfix: put up busy forwarding flag only after next hop found	2009-03-04 08:59:32 +00:00
fros4943	f701615afa	bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver. ... + added function for checking if runicast is currently transmitting (non-acked) data	2009-03-03 12:19:46 +00:00
adamdunkels	9816f49fe6	Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy	2009-03-02 22:00:41 +00:00
adamdunkels	78591a003f	Minor documentation update	2009-03-02 21:56:16 +00:00
adamdunkels	45e32894a0	Bugfix: backwards definition of MIN macro (quite embarassing)	2009-03-02 11:22:09 +00:00
adamdunkels	d813d343c5	Cleaned up old left-over code	2009-03-01 20:38:57 +00:00
adamdunkels	7010eb84b8	Added support for communication power accounting. Energy is attributed to idle listening when the radio is switched off. Enegrgy is attributed to an incoming packet when it is received. Energy is attributed to an outgoing packet when it is transmitted.	2009-03-01 20:37:16 +00:00
adamdunkels	aa2f7a3399	Made polite announcement times configurable, added missing right-brace	2009-03-01 10:43:57 +00:00
adamdunkels	3adf8e5807	Call output packet sniffers after the MAC has sent the packet	2009-03-01 10:29:50 +00:00
oliverschmidt	bc3d9d2e3c	Minor rearrangement.	2009-02-28 11:57:46 +00:00
julienabeille	f95c5df7d9	The global prefixes processed must be one less than the total amount of prefixes, as the link local one occupies one slot	2009-02-25 08:35:52 +00:00
adamdunkels	2aedc8490d	Compile only if timesynch is enabled	2009-02-20 21:23:22 +00:00
adamdunkels	e6907a1d8b	Include random.h	2009-02-20 21:22:39 +00:00
adamdunkels	4ec5167276	Rewrote the tcpip_output() and tcpip_set_outputfunc() so that the latter is a proper function (which simplifies debugging) and so that tcpip_output() checks if the output callback function is NULL before calling it	2009-02-20 21:21:56 +00:00
julienabeille	10deaa6fc6	Removed CLOCK_SECOND from stimers in uIPv6, stimers are already in seconds	2009-02-20 07:59:35 +00:00
julienabeille	710e5c621c	changed timer to stimer for neighbor, prefix, default router, address list	2009-02-19 16:42:41 +00:00
fros4943	97f76126e6	remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course)	2009-02-17 12:40:18 +00:00
c_oflynn	8516626703	Fixed documentation error (thanks to David Kopf)	2009-02-17 01:28:28 +00:00
adamdunkels	36bb3ece64	If no neighbor is found, we listen for announcements. Cleaned up debug output.	2009-02-16 01:18:53 +00:00
adamdunkels	aaa8c9d2c9	Construct the X-MAC header on the stack instead of directly in the packet header, because the packet header may be misaligned. A bit of cleanup in the code too.	2009-02-15 22:05:06 +00:00
adamdunkels	e4b1ff461e	Added MAC-layer announcement beacons to X-MAC. Configuratble through XMAC_CONF_ANNOUNCEMENTS	2009-02-14 20:35:03 +00:00
adamdunkels	585620c102	Reverted the recent change from random_rand() to rand(). It turned out that ... since libc rand() returns a signed int, there were frequently problems with timer values wrapping. By reverting to random_rand(), we can provide a random generator that returns an unsigned and the timer problems are solved.	2009-02-11 11:08:53 +00:00
adamdunkels	9d75781a78	Added packet attributes for energy spent on a packet (RIMEBUF_ATTR_LISTEN_ENERGY and RIMEBUF_ATTR_TRANSMIT_ENERGY)	2009-02-10 23:51:12 +00:00
adamdunkels	b15198b9a8	Bugfix: the Chameleon header parser modules should not clear the packet attributes, because the MAC or radio layers may have added attributes already	2009-02-10 23:49:58 +00:00
adamdunkels	e1ef13dad6	Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...)	2009-02-10 00:44:50 +00:00
adamdunkels	6c95bd895a	Added default initialization of polite announcements. Not sure where the best place for this is, but this at least allow us to start experimenting with this.	2009-02-09 22:05:33 +00:00
adamdunkels	3efb83c338	Added announcement includes	2009-02-09 21:09:42 +00:00
adamdunkels	0de445e035	Initialize the announcement module	2009-02-09 21:08:12 +00:00
adamdunkels	3670ef2f44	Rewrote the collect module so that it uses the announcement module rather than the neighbor-discovery module. This makes it possible to implement other annoumcement back-ends than the traditional broadcast-based neighbor discovery	2009-02-09 20:58:25 +00:00
adamdunkels	dd9ffd87c4	Added missing #include announcement.h	2009-02-08 20:14:18 +00:00
adamdunkels	085df6b630	Improved version of LPP with support for broadcasts as well as announcement data in the probes	2009-02-08 19:30:18 +00:00
adamdunkels	91d280c4c9	Reverted to the old behaviour on broadcasts: send strobes for both unicast and broadcast packets.	2009-02-07 18:45:50 +00:00
adamdunkels	4b71003c2f	Changed from random_rand() to rand() for better pseudo randomness	2009-02-07 18:43:45 +00:00
adamdunkels	752291f450	Changed from random_rand() to rand() function for (pseudo) random numbers because random_rand() does not work that well	2009-02-07 16:16:31 +00:00
adamdunkels	91e8487032	Added Doxygen documentation	2009-02-07 16:15:37 +00:00
adamdunkels	be846d8c90	A new experimental network primitive called an 'announcement'. An ... announcement is an (ID, value) tuple that is disseminated to local area neighbors. An application or protocol can explicitly listen to announcements from neighbors. When an announcement is heard, a callback is invoked. Announcements can be used for a variety of network mechanisms such as neighbor discovery, node-level service discovery, or routing metric dissemination. Application programs and protocols register announcements with the announcement module. An announcement back-end, implemented by the system, takes care of sending out announcements over the radio, as well as collecting announcements heard from neighbors.	2009-02-05 19:32:01 +00:00
fros4943	4f1a9d3c75	bugfix: stopping timeout timer when we receive route reply (still limited to only one active discovery)	2009-01-21 14:29:24 +00:00
adamdunkels	71e5adb254	Moved packet attributes specifications from rimebuf.h to the appropriate protocol header files	2009-01-15 22:15:51 +00:00
c_oflynn	5ec6412fbc	*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw	2008-12-10 21:26:05 +00:00
c_oflynn	17790ce46a	Bug fix by David Kopf - sicslowpan timeout was always set at 20 seconds, this greatly improves performance!!	2008-12-02 22:04:16 +00:00
adamdunkels	50b1e60621	Rewrote the rimeaddr_copy() loop to use the ->u8 field instead of the ->u16 field (which now finally is removed)	2008-11-30 18:26:57 +00:00
adamdunkels	6951d9d582	Removed the unused ->u16 field (it was there only as a convenience/laziness access method during the initial development of the Rime stack, but has caused problems when being there)	2008-11-30 18:26:06 +00:00
oliverschmidt	7cf3165155	Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.	2008-11-17 22:52:10 +00:00
fros4943	e42d572f81	updated for latest mac driver structure	2008-11-12 12:42:41 +00:00
zhitao	229d60d691	Neighbor ETX should accumulate over retransmission timeouts; ... Best neighbor has minimum sum of routing metric and neighbor ETX. Previously best neighbor prioritizes routing metric before neighbor ETX, which often causes a poor neighbor with a good upstream path to be selected.	2008-11-12 10:47:17 +00:00
oliverschmidt	75ffd0640c	Inform user about (most likely unintentional) call of dummy_tcpip_output_function.	2008-11-10 21:00:53 +00:00
adamdunkels	3b283a5ff3	Added dummy function so that tcpip_output() always is defined, even if tcpip_set_outputfunc() never has been called. This fixes a bug with programs attempting to use the network when compiled for the native platform.	2008-11-09 12:29:24 +00:00
adamdunkels	5243d58ac5	Added logic for announcing that a network has a gateway to the outside world (with the function uip_over_mesh_make_announced_gateway()). The announced gateway sends a trickle message to the network, containing the address of the gateway. Other nodes will then know that packets destined to the outside world should go through the gateway node.	2008-11-09 12:20:56 +00:00
adamdunkels	8851a6359a	Remove unguarded printf()	2008-11-09 12:16:05 +00:00
oliverschmidt	28889f2210	Commented out otherwise unguarded printf().	2008-11-06 23:15:58 +00:00
nvt-se	0c4f7bed8f	temporary fix to get sicslowpan.c working on the Sky platform: ... conventional MAC implementations require a call to the MAC driver's read function.	2008-11-06 20:45:06 +00:00
adamdunkels	d73124cc5e	Bugfix: there was a problem with TCP segments not being properly retransmitted for protosockets-based applications. Cleaning up the logic around acknowledgements and retransmissions fixed the bugs pertaining to retransmissions of lost packets. This bugfix affects both the telnet server and the web server (which now work as expected wrt packet loss).	2008-10-31 18:10:24 +00:00
adamdunkels	f623b81d59	Temporarily out-commented the problematic code and added a comment that describes the problem	2008-10-17 14:40:16 +00:00
mdurvy	75f036f698	uncommented the remove of the router (necessary for compliance)	2008-10-16 09:07:43 +00:00
blakelev	99f6932cdf	Removed one line to prevent the default router from being removed ... prematurely. This timer should not time out, but it does.	2008-10-15 23:29:38 +00:00
adamdunkels	adc57729c3	struct uip_udp_conn should be declared even if UIP_UDP is zero (it does not add any extra code)	2008-10-15 08:56:44 +00:00
adamdunkels	e931260603	Added more curly brackets to ensure ANSI C compliance when UIP_TCP is defined;	2008-10-15 08:52:30 +00:00
adamdunkels	6a3565f5b6	Added an #if around the whole code if IPv6 is defined	2008-10-15 08:08:32 +00:00
adamdunkels	91910f82dd	added curly brackets to ensure ANSI C compliance when UIP_TCP is defined; some automatic whitespace removal	2008-10-15 07:59:34 +00:00
adamdunkels	647443cb9d	Added payload field to ICMP v4 header that was inadvertedly removed during the uIPv6 commits; automatic whitespace removal at line ends	2008-10-15 07:55:00 +00:00
julienabeille	2238f2e7da	Debugged autoconf for ethernet	2008-10-14 16:50:11 +00:00
julienabeille	4f9bc05f90	ping-ipv6 example compiles on native cygwin	2008-10-14 13:39:12 +00:00
adamdunkels	fc1a8575d6	Removed unused include files (also automatically removed whitespace from line endings)	2008-10-14 12:26:18 +00:00
julienabeille	2e8264010b	Main uIPv6 files addition - more	2008-10-14 09:42:33 +00:00
julienabeille	f95cdc5abb	Main uIPv6 files addition	2008-10-14 09:40:56 +00:00
adamdunkels	7b238a91af	Don't turn on the radio on after sending a broadcast	2008-09-04 17:44:01 +00:00
adamdunkels	41dcd78c8b	Improved debugging output	2008-08-15 19:28:33 +00:00
adamdunkels	31509ad726	Fixed a bunch of bugs in the collection neighbor announcement/discovery code: neighbor announcments were not repeated unless there was a change in the ETX val. Neighbor announcements happened to often when there were changes in the ETX.	2008-08-15 19:00:38 +00:00
adamdunkels	210782d9c6	Set the channel as a packet attribute	2008-08-15 18:59:22 +00:00
adamdunkels	9a4e5dfabf	Rewrote the neighbor discovery code so that messages are suppressed if a lower rtmetric is received. This reduces the overall number of broadcast packets.	2008-07-09 09:33:58 +00:00
adamdunkels	9318117429	Fixed function prototype compiler warning	2008-07-08 10:59:31 +00:00
adamdunkels	ba5c18a468	Rewrote the trickle code to run directly over the broadcast primitive: the previous implementation did not work as expected, because packets were not supressed correctly by the previous underlying netflood primitive	2008-07-07 23:29:30 +00:00
adamdunkels	df33cb6e16	Only send ACK if it was possible to allocate a queuebuf to hold the data packet.	2008-07-07 23:27:57 +00:00
adamdunkels	4d35b905d3	Bugfix: check should cover min(hdrsize, datalen), not max	2008-07-07 23:27:05 +00:00
adamdunkels	c0c26262c4	No need to send strobes for broadcast packets: just send the actual packet instead	2008-07-07 23:25:12 +00:00
adamdunkels	cfcdac3122	Avoid crashing if Rime/Chameleon is not initialized when Rime code is run	2008-07-03 23:13:31 +00:00
adamdunkels	4687c2c948	Renamed Rime module mh to multihop	2008-07-03 22:36:02 +00:00
adamdunkels	d9b3097037	Renamed Rime nf module to netflood	2008-07-03 22:25:22 +00:00
adamdunkels	ec22f3c2fc	Renamed Rime nf module to netflood	2008-07-03 22:02:09 +00:00
adamdunkels	c2c3835110	Changed name of Rime module ruc to unicast	2008-07-03 21:52:25 +00:00
adamdunkels	eddf71f534	Changed name of suc module to stunicast	2008-07-03 21:35:46 +00:00
adamdunkels	8a1ed696d9	Slightly nicer formatting	2008-07-03 21:34:12 +00:00
adamdunkels	a6682c4bfd	originator address is const	2008-07-03 17:58:10 +00:00
adamdunkels	f274b26588	Added CC_CONST_FUNCTION as a work-around to the sdcc const function pointer bug	2008-07-03 07:38:52 +00:00
adamdunkels	040d65c1f6	Added missing #include sys/cc.h to make system compile	2008-07-03 07:37:51 +00:00
matsutsuka	d194d54e8e	CC_CONST_FUNCTION replaces some const keywords in order to workaround a sdcc bug, which cannot handle function pointers as const.	2008-07-02 15:02:33 +00:00
adamdunkels	05454ce929	Documentation bugfix	2008-07-02 14:10:28 +00:00
adamdunkels	66876625d4	Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.	2008-07-02 09:05:40 +00:00
adamdunkels	1586d8f36f	Changed filename of the CC2420 driver from simple-cc2420 to cc2420.	2008-07-01 21:02:51 +00:00
adamdunkels	7054083d88	Reverted mistakenly added #include for non-existant file	2008-06-30 20:00:53 +00:00
adamdunkels	1d1ab90642	Added rimebuf attributes for RSSI, timestamp, and network ID (used for e.g. 802.15.4 PAN ID)	2008-06-30 19:57:10 +00:00
adamdunkels	651a374eca	Removed unused sibc module	2008-06-30 19:56:08 +00:00
adamdunkels	020a0c30aa	Rewrote the collect module to use packet attributes instead of explicit headers	2008-06-30 09:15:22 +00:00
adamdunkels	6bbb99438e	Cleaned up Rime makefile - removed sibc, changed name of sabc to stbroadcast	2008-06-30 08:29:32 +00:00
adamdunkels	e6079870fe	Changed name of the sabc module to stbroadcast	2008-06-30 08:28:53 +00:00
adamdunkels	1093a8fe28	Added name to mac structure. Do not turn radio on when sending a broadcast packet. Changed default off time to half a second.	2008-06-30 08:10:02 +00:00
adamdunkels	247de015b5	added name to mac structure	2008-06-30 08:09:17 +00:00
adamdunkels	c9528fb010	Added name, made default listen time shorter	2008-06-30 08:08:59 +00:00
adamdunkels	a7dfa95551	Added a 'name' field in the mac structure, which allows boot-up code to print out the name of the currently selected MAC protocol	2008-06-30 08:08:27 +00:00
adamdunkels	4349504219	Bugfix: fixed the missing arguments to make Rime compile	2008-06-27 16:44:58 +00:00
nifi	839b6111d6	Changed send function to return false if it was not possible to send	2008-06-26 11:38:59 +00:00
adamdunkels	63c620303a	Changed the 'ibc' and 'uc' Rime modules into the more descriptive names 'broadcast' and 'unicast'	2008-06-26 11:19:22 +00:00
oliverschmidt	a5fcfa2787	I seem to remember that we wanted to avoid ignoring gcc warnings that might trigger errors with other compilers ;-)	2008-05-16 21:31:57 +00:00
adamdunkels	532692e5a0	Removed reference to non-existant function rimebuf_attr_isset()	2008-05-16 15:04:10 +00:00
adamdunkels	8ea461b039	Changed on time to work with the current default tick time on the sky platform	2008-05-15 08:59:48 +00:00
adamdunkels	dbab9fbdb5	A quick, initial implementation of the LPP power-saving MAC protocol (Musaloiu-E et al, IPSN 2008)	2008-05-15 08:56:29 +00:00
adamdunkels	1feb4fe3cb	Removed call to tcpip_set_forwarding() - the UIP_CONF_IP_FORWARDING configuration option is used instead	2008-05-14 19:20:28 +00:00
adamdunkels	31ea41d8db	Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level	2008-05-14 19:19:28 +00:00
nifi	fe4f8f4339	clear attributes when clearing buffer	2008-04-03 09:07:28 +00:00
nifi	f187981cd6	Fixed type offset bug in rimebuf_addr() and removed unused type for attributes and addresses. Replaced memcpy with loop.	2008-04-02 14:49:21 +00:00
nifi	8d47324d8f	fixed typo	2008-04-01 13:22:59 +00:00
nifi	fabe4393f7	fixed alignment problem with rime/chameleon	2008-04-01 13:10:22 +00:00
oliverschmidt	59145615b0	Changed packet forwarding from a runtime option to a compiletime option. This avoids pulling in uip-fw.o if forwarding isn't required (saves > 1400 bytes on 6502 targets). ... *** This change breaks all platforms calling tcpip_set_forwarding() ! These calls were intentionally not removed as they need to be replaced by setting the new compiletime option UIP_CONF_TCP_FORWARD - which should be done by the platform owners. ***	2008-03-29 15:19:25 +00:00
adamdunkels	5901bf977a	Changed assignment to explicit copy to enable compilation with SDCC	2008-03-20 09:40:31 +00:00
adamdunkels	39c85118d8	Ensure that header_module is != NULL before calling it. Define and print headers only if DEBUG is set.	2008-03-03 20:20:33 +00:00
oliverschmidt	aa7ba44fb1	Avoided compiler warning.	2008-02-28 23:59:05 +00:00
oliverschmidt	edbae75705	Stick to CC_INLINE.	2008-02-28 21:25:34 +00:00
fros4943	cefaa38581	-debugging output	2008-02-27 10:39:17 +00:00
adamdunkels	a0c833da11	Mistakenly included development code in the Makefile target	2008-02-25 13:22:34 +00:00
adamdunkels	412facb831	This is an initial commit of an implementation of the Chameleon ... architecture for the Rime stack for Contiki. The Chameleon architecture separates the header processing from the Rime protocol logic. Instead of having each protocol create its own part of the packet header, protocols use packet attributes. Before sending a packet, a special Chameleon header processing module creates a packet header from the packet attributes. The same Chameleon module parses incoming packets and creates packet attributes from the header. The details are in our SenSys 2007 paper: Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication Architecture for Wireless Sensor Networks. In Proceedings of the Fifth ACM Conference on Networked Embedded Sensor Systems (SenSys 2007), Sydney, Australia, November 2007. http://www.sics.se/~adam/dunkels07adaptive.pdf This is a rewrite of the code that was developed for the paper.	2008-02-25 02:14:34 +00:00
adamdunkels	974870359a	Changed all occurences of u8_t and u16_t to uint8_t and uint16_t	2008-02-24 22:10:30 +00:00
adamdunkels	d99ca27820	Changed all occurences of u8_t and u16_t to uint8_t and uint16_t	2008-02-24 22:05:27 +00:00
adamdunkels	3c1b0f4e65	Debug output slightly improved	2008-02-24 21:09:08 +00:00
adamdunkels	16c715aade	Updated collect_open() definiton to match prototype declaration	2008-02-24 21:08:37 +00:00
adamdunkels	be1dd57cb3	Stopping watchdog before sending packets to allow for wait times longer than 1 second. Reduced default on time to 5 ms. Added option for turning off X-MAC but keeping the radio turned on.	2008-02-24 21:07:28 +00:00
adamdunkels	32a3fa5d4a	Added parameter to the mac off() method that specifies whether or not the radio should be turned off when the MAC layer is turned off	2008-02-24 21:05:28 +00:00
adamdunkels	436d1f25eb	Added a configuration option for using u32 in the uip_ip4addr_t structure: UIP_CONF_UIP_IP4ADDR_T_WITH_U32	2008-02-24 21:04:15 +00:00
adamdunkels	8c782de931	Ensure that no more data than can be held by the buffer is sent with uip_send()	2008-02-24 21:03:24 +00:00
adamdunkels	49bc31236e	Improved debug output	2008-02-24 21:02:09 +00:00
oliverschmidt	8f81934bfd	Since revision 1.11 the usage of the label 'ip_send_nolen' isn't solely depending on UIP_UDP anymore.	2008-02-15 17:12:46 +00:00
oliverschmidt	081d50b878	Reverted part of recent change. The 32-bit member causes 32-bit alignment on 32-bit machines - at least without specific compiler options. That 32-bit alignment causes padding i.e. the ARP structure breaking the existing code.	2008-02-09 16:22:22 +00:00
nifi	b06e6c60a9	Name fix on uip_all_zeroes_addr	2008-02-08 09:12:57 +00:00
adamdunkels	2187212703	Name fix on uip_all_zeroes_addr	2008-02-07 01:35:00 +00:00
adamdunkels	d407fe2e9f	Set TTL on outbound ICMP echo reply packets to make Windows tracert work	2008-02-07 01:34:25 +00:00
adamdunkels	245558fd56	Make windows tracert work: needs ICMP time exceeded sent for ICMP echo packets	2008-02-07 01:33:47 +00:00
adamdunkels	fc603fdcc6	constness	2008-02-05 20:18:57 +00:00
adamdunkels	3d6c1c966b	Bugfix: forwarding functions now have access to its packet headers. Added last hop to the arguments to the reception function	2008-02-05 20:17:43 +00:00
adamdunkels	33bcc24019	Increased timeouts, updated to match new mh API	2008-02-05 20:16:48 +00:00
adamdunkels	465f75736d	Minor source code reformatting	2008-02-03 21:12:44 +00:00
adamdunkels	f1bec7b955	Added the ability to send packets to an external network	2008-02-03 20:56:07 +00:00
adamdunkels	53f0b7feb8	Added line drawing code when compiled for the netsim target	2008-02-03 20:52:41 +00:00
adamdunkels	2886e03f57	Rewrote the neighbor code to use memb and a list instead of a static array	2008-02-03 20:44:11 +00:00
adamdunkels	c576b7b01c	Optimized transmission when interval == 0	2008-01-25 01:06:25 +00:00
adamdunkels	6e89e545b3	Added optional transmission of ICMP destimation unreachable in response to incoming UDP packets with an destination port that is not open. This is needed for correct operation of traceroute	2008-01-24 23:08:58 +00:00
adamdunkels	c9508567a1	Bugfix: IP addresses in ICMP time exceeded messages were not transmitted correctly	2008-01-24 23:07:37 +00:00
adamdunkels	49ac5f9026	Show rt metric in netsim as number of expected transmissions	2008-01-24 21:11:40 +00:00
adamdunkels	cdfe030980	Send immediately if interval == 0. Added debug information	2008-01-24 21:10:50 +00:00
adamdunkels	bf8b5c093d	Made timetable code optional	2008-01-24 06:17:51 +00:00
adamdunkels	e7fb51b14c	Added generic return valued	2008-01-24 06:17:33 +00:00
adamdunkels	29cc2b1266	Updated debug printouts	2008-01-23 16:10:10 +00:00
adamdunkels	c8dccbbd40	Added a function for converting a timesynchronized time to a local (rtimer) time	2008-01-23 15:07:05 +00:00
adamdunkels	8a9b931a4b	Rewrote most of the X-MAC code to make it easier to follow, debug and modify. Also added an optional, experimental time synchronized addition that makes X-MACs on different nodes explicitly de-synchronized	2008-01-23 15:00:54 +00:00
adamdunkels	5c169ac291	Better debug output	2008-01-21 12:19:27 +00:00
adamdunkels	57b54894f8	Removed mistakenly added development files	2008-01-14 16:05:34 +00:00
adamdunkels	34bd11905c	Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer	2008-01-14 14:50:01 +00:00
adamdunkels	02ee418313	Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel	2008-01-14 14:22:16 +00:00
adamdunkels	042180c13f	Rewrote the sniffer code to use a list, which makes it possible to add any number of sniffers. Sniffers now can be both for incoming and outoing packets.	2008-01-14 09:42:00 +00:00
adamdunkels	7fcb1f3b2a	Updated debug output	2008-01-14 09:36:35 +00:00
adamdunkels	94f8978443	Rewrote the sniffer code to use a list, which makes it possible to add any number of sniffers. Sniffers now can be both for incoming and outoing packets.	2008-01-14 09:35:53 +00:00
adamdunkels	b26754fd95	Removed unused code	2008-01-14 09:34:33 +00:00
adamdunkels	7b94bfb621	Rewrote the code to use polite broadcasts istead of regular broadcasts. This reduces the amount of broadcast traffic, particularly for dense networks.	2008-01-14 09:34:00 +00:00
adamdunkels	bd125aaac6	Changed the code so that the rtimer is only set from the rtimer (interrupt) code, and not from the non-rtimer code. Removed unused code that was supposed to turn the radio off when a packet for another node was heard (but which didn't really work anyway). Changed default on time to 1/100 seconds, and off time to 1/2 seconds	2008-01-14 09:26:42 +00:00
adamdunkels	f6b4022511	Setting a lower value now causes a discovery packet go out quicker	2008-01-08 08:27:25 +00:00
adamdunkels	bac26c90c8	Made a primary transmission go out immediately instead of within a random interval	2008-01-08 08:26:48 +00:00
adamdunkels	a20202231d	Minor type change	2008-01-08 08:00:13 +00:00
adamdunkels	d2be099c0e	Bugfix: queue buffers were not freed when a new packet was sent, leading to memory leakage. Added debug output.	2008-01-08 07:59:51 +00:00
adamdunkels	c6a43333d2	Call the timeout function only if it is non-NULL	2008-01-08 07:58:49 +00:00
adamdunkels	40d6216ec9	Added API for reading the routing table	2008-01-08 07:58:23 +00:00
adamdunkels	601560b1eb	Added hopcount to callbacks	2008-01-08 07:55:56 +00:00
adamdunkels	0c748d7dd2	Debug formatting fixes	2008-01-08 07:55:15 +00:00
adamdunkels	f737127cca	Minor type change	2008-01-08 07:55:00 +00:00
adamdunkels	16142f12c7	Removed unused code	2008-01-08 07:54:40 +00:00
adamdunkels	88a010acdc	Added a simple sniffer callback, which currently is a hack - a better solution would be a list of sniffers for both outgoing and incoming packets, but this will do for now.	2008-01-08 07:53:02 +00:00
adamdunkels	5b454bbd5f	Added a simple sniffer callback, which currently is a hack - a better solution would be a list of sniffers for both outgoing and incoming packets, but this will do for now. Added trickle, neighbor & route includes.	2008-01-08 07:52:31 +00:00
adamdunkels	25a5434fb5	Sending with interval 0 made explicit	2008-01-07 14:53:04 +00:00
adamdunkels	d33871facc	Bugfix: hops should be at least one for all packets that are sent over the radio	2008-01-07 14:52:23 +00:00
oliverschmidt	00d75c8d16	Made use of uip_ipaddr_to_quad().	2008-01-04 23:28:33 +00:00
oliverschmidt	af6d9a59be	Adjusted value (without distinguishing between Ethernet, SLIP, ...).	2007-12-23 20:24:46 +00:00
oliverschmidt	a9ebc469b8	Avoid usage of POSIX function names even for static functions as some indirectly included system header might declare them.	2007-12-23 14:56:54 +00:00
oliverschmidt	8a4e2ec268	Fixed typo.	2007-12-22 12:02:43 +00:00
adamdunkels	3033b86753	Made the number of routing table entries configurable	2007-12-17 09:20:16 +00:00
adamdunkels	758411d06d	Cleaned up #includes to avoid cyclic dependencies - the Rime includes no longer depend on rime.h	2007-12-17 09:14:08 +00:00
adamdunkels	8287215c82	Removed obsolete, unused files	2007-12-17 09:12:16 +00:00
adamdunkels	07e2ca9287	Documentation updates	2007-12-16 14:33:32 +00:00
adamdunkels	5c5775e93b	Ensure that receiver_callback is set before calling it	2007-12-16 14:31:43 +00:00
fros4943	2c67936d6d	including uaodv-rt	2007-12-13 10:04:59 +00:00
adamdunkels	43d394f758	Maximum rtmetric now defined by the collect module - a bit of a hack since this probably should be configured elsewhere (and be referenced by both the collect and the neighbor module) but it will do for now	2007-12-09 15:44:21 +00:00
adamdunkels	5a89c19b5e	Changed to store neighbors' rtmetrics as 16 bit valued	2007-12-09 15:43:51 +00:00
adamdunkels	01da62aa25	Changed local rtmetric name from 'local_rtmetric' to 'rtmetric' and updated the neighbor discovery module from nbh to neighbor-discovery	2007-12-09 15:43:09 +00:00
adamdunkels	4e1d2906b7	Changed name on the neighbor discovery module from (cryptic) 'nbh' to 'neighbor-discovery'	2007-12-09 15:40:43 +00:00
oliverschmidt	29b2d1d236	Allow to link with UIP_CONF_ACTIVE_OPEN set to 0.	2007-12-08 23:06:02 +00:00
oliverschmidt	3b95e284fc	Allow to actually configure active open support via UIP_CONF_ACTIVE_OPEN. ... Is there any reason I don't understand why this wasn't allowed? At least it seems to work...	2007-12-08 23:04:34 +00:00
adamdunkels	761ad7dd57	Updated debug output	2007-12-05 13:40:34 +00:00
adamdunkels	fff49f6671	Correct route lookup	2007-12-05 13:40:26 +00:00
adamdunkels	36b7c7e782	Added missing forwarding function	2007-12-05 13:26:13 +00:00
adamdunkels	bfd5db667a	Don't call the forward function if it is not defined	2007-12-05 13:25:07 +00:00
adamdunkels	18fd561041	Avoid switching the radio on and off when the MAC layer is turned off. Cleanups.	2007-12-05 13:23:17 +00:00
adamdunkels	442516356a	Expose the Rime MAC driver so that applications can use it - a bit of a hack, but it works for now	2007-12-05 13:21:58 +00:00
adamdunkels	6720b41707	Removed debug output	2007-11-28 20:03:50 +00:00
adamdunkels	1fd6e1bef9	Increased default route lifetime to 60 seconds. Routes are now refreshed every time they are looked up.	2007-11-28 20:00:57 +00:00
adamdunkels	996a8af0dd	Fixed include of ruc instead of abc	2007-11-28 20:00:07 +00:00
adamdunkels	6e739853f7	Updated the multihop forwarding interface to match the intended operation of the module: to let the user produce the route, and the mh module only does the forwarding	2007-11-28 19:55:27 +00:00
adamdunkels	d9bda3bc80	Added mh.h and rmh.h to the default includes	2007-11-28 19:54:24 +00:00
adamdunkels	dca1e0e446	Changed module name to 'collect' from 'tree' to better reflect the purpose of the module, rather than the particular data structure used to implement it	2007-11-28 16:04:41 +00:00
adamdunkels	b003f32e27	Added #ifdef around label (yes, ugly) to avoid compiler warning with UIP_UDP == 0	2007-11-28 12:53:07 +00:00
adamdunkels	6e228f7a79	uaodv.c now compiles without #if UIP_UDP	2007-11-28 12:52:34 +00:00
adamdunkels	3e35a97776	Exposed a few UDP declarations even when UIP_UDP == 0 to make uaodv.c compile	2007-11-28 12:52:12 +00:00
matsutsuka	1dd0e32a1e	#if UIP_UDP ... option is added, because this file cannot be compiled and is unnecessary when UIP_UDP==0.	2007-11-28 10:15:44 +00:00
adamdunkels	b07b46dd79	Removed unused return value from ruc recv callback	2007-11-27 23:32:34 +00:00
adamdunkels	f6cf045413	Always add neighbors to the list regardless if their rtmetric is higher than ours or not. If our rtmetric rises, we may need ot have those neighbors in our list.	2007-11-26 23:31:44 +00:00
adamdunkels	98854f80e0	Made Rime address size configurable through contiki-conf.h	2007-11-26 23:30:35 +00:00
adamdunkels	75be20bea6	Added function for accessing a specific neighbor	2007-11-26 23:30:13 +00:00
adamdunkels	58d6310979	Added #ifdef around MAX definition to avoid compiler warnings	2007-11-26 23:22:41 +00:00
adamdunkels	52a8e8d16b	Fixed to match the Contiki code style	2007-11-26 15:31:32 +00:00
nvt-se	977fdc7f03	Format requires unsigned long.	2007-11-18 11:21:29 +00:00
oliverschmidt	aedb4f56da	Moved logically empty files to backyard.	2007-11-18 01:18:09 +00:00
adamdunkels	1e1e44a3f8	Fixed compiler warnings to make code compile with gcc's -pedantic switch	2007-11-17 18:01:00 +00:00
adamdunkels	d9eebf7e17	Fixed compiler warnings	2007-11-17 10:46:25 +00:00
adamdunkels	7fd1eca954	Added debug output	2007-11-17 10:34:17 +00:00
adamdunkels	9bd3c0c07c	Re-added hop count to header, fixes related to ETX computation: adv packets do not add a good etx, timedout packets do not restore the neighbor age, removed unused code	2007-11-17 10:32:54 +00:00
adamdunkels	5e7cbff22a	Fixed compiler warnings	2007-11-17 10:12:19 +00:00
adamdunkels	a7102829e3	Updated ruc callback types to fix compiler warnings	2007-11-17 09:59:48 +00:00
adamdunkels	0a8b1cbd76	Updated ruc callback types to fix compiler warnings	2007-11-17 09:47:55 +00:00
fros4943	532d9814c2	configurable rudolph datasize	2007-11-16 09:17:22 +00:00
nifi	c989d425dc	fixed compiler warning	2007-11-15 13:33:09 +00:00
nifi	a6d827fa1f	moved initialization of ctimer to allow MAC layer to use ctimers	2007-11-15 13:07:42 +00:00
fros4943	c645cad175	fixed conflicting types: nbh.c vs nbh.h	2007-11-15 08:10:42 +00:00
adamdunkels	0a7f35d62c	Added neighborhood discovery module	2007-11-13 21:01:54 +00:00
adamdunkels	1386b8ae8f	Added API to retrieve address of current receiver	2007-11-13 21:00:10 +00:00
adamdunkels	c40dde1209	Updated ruc to send ACKs before notifying applications, and API support for the etx-based tree code	2007-11-13 20:58:46 +00:00
adamdunkels	6845d2a1aa	Updated tree to use expected transmissions (etx) as routing metric	2007-11-13 20:39:29 +00:00
nifi	44480fc7b7	added fix to enable start of ctimers before etimer process has started	2007-11-13 15:13:03 +00:00
adamdunkels	1cb3bad088	Multiple bugfixes and updates to xmac code by Niclas	2007-11-12 22:29:37 +00:00
nvt-se	6b7173809d	anonymous -> identified.	2007-11-12 12:34:29 +00:00
adamdunkels	feed6cf679	const parameter to rimbuef_copyfrom()	2007-10-25 12:48:46 +00:00
adamdunkels	67aa9e8589	Made initialization function return a pointer to the MAC driver structure, to make initialization nicer	2007-10-23 21:27:57 +00:00
adamdunkels	f638c628d7	Made initialization function return a pointer to the MAC driver structure, to make initialization nicer	2007-10-23 20:57:37 +00:00
nifi	9a11bc1543	only update rimestats rexmit for retransmissions + added debug output when retransmitting	2007-10-23 14:00:36 +00:00
nifi	0bf47de9ba	fixed compiler warning	2007-10-19 13:50:01 +00:00
nifi	d5580ae7ee	corrected debug print	2007-10-02 13:41:12 +00:00
matsutsuka	a6527b34d9	When UIP_UDP is off, turn off udp functions more accurately.	2007-09-29 03:54:18 +00:00
nifi	1abf2c4c16	fixed compiler warning	2007-09-26 11:34:49 +00:00
fros4943	aa99049af0	simple tdma rtimer implemetation	2007-09-18 10:37:17 +00:00
fros4943	19b3035e36	simple tdma ctimer implementation	2007-09-18 10:36:36 +00:00
fros4943	25d2514541	xmac ctimer implementation	2007-09-18 10:35:39 +00:00
nvt-se	33687d8e6f	A function declared in lib/random.h is used, so this file should be included ... instead of lib/rand.h.	2007-09-14 20:26:52 +00:00
matsutsuka	8fd76351eb	removed debugging printf	2007-09-08 16:12:54 +00:00
matsutsuka	4cd7302ecb	make an old debbuging printf optional	2007-09-08 15:32:30 +00:00
nvt-se	1d1b99c0aa	refer to PSOCK_NEWDATA.	2007-09-04 12:39:00 +00:00
fros4943	858e2682e6	platform independent simple slotted tdma mac protocol ... observe: uses event timers, not real-time timers!	2007-08-31 13:42:22 +00:00
matsutsuka	9d4fc0a1a8	Support for z80(sdcc) port. ... In order to support, some core modules are modified as follows: core/sys/dsc.h - If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled. - DSC_HEADER is changed to remove extra semicolon. core/sys/process.h - process_data_t is expressed by void* in signatures (known bug on sdcc). core/sys/autostart.h - autostart_processes is changed to remove extra semicolon. core/sys/cc.h - CC_CONF_ASSIGN_AGGREGATE is introduced. - CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind of sdcc bug for an increment. core/net/hc.c core/net/uip_arp.c core/net/uaodv.c - Aggregation assignments are changed to uip_ipaddr_copy. core/net/psock.c core/net/uipbuf.c core/net/dhcpc.c apps/shell/shell.c core/ctk/vnc-server.c core/ctk/vnc-out.c - "register" keyword in a signature cannot be used in sdcc, CC_REGISTER_ARG is used instead. core/net/uip-over-mesh.c - An extra semicolon is removed. apps/dhcp/dhcp-dsc.c apps/shell/shell-dsc. apps/ftp/ftp-dsc.c apps/process-list/process-list-dsc.c apps/email/email-dsc.c apps/webserver/webserver-dsc.c apps/vnc/vnc-dsc.c apps/vnc/vnc-viewer.h apps/webbrowser/www-dsc.c apps/about/about-dsc.c apps/irc/irc-dsc.c apps/telnet/telnet-dsc.c apps/telnetd/telnetd-dsc.c apps/netconf/netconf-dsc.c apps/directory/directory-dsc.c pps/calc/calc-dsc.c - Modify an extern type to a real declaration, which is static to prevent a compile error. core/net/mac/xmac.c - Variables cannot be defined in a head of block on sdcc. core/ctk/ctk.h core/ctk/ctk.c apps/program-handler/program-handler.c - If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled. Makefile.include - Add a set of configuration for an assembler. - $(CLEAN) variable is introduced for customized cleanup. apps/process-list/process-list.c - PROCESSLIST_CONF_HEIGHT is introduced to address smaller screen size. core/lib/ctk-filedialog.c - FILES_CONF_HEIGHT is introduced to address smaller screen size. - "register" keyword in a signature cannot be used in sdcc, CC_REGISTER_ARG is used instead. apps/vnc/vnc-viewer.c - A cast is added to prevent a compile error. - "register" keyword in a signature cannot be used in sdcc, CC_REGISTER_ARG is used instead. apps/webbrowser/webclient.c - CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind of sdcc bug for an increment. core/loader/elfloader.c - A cast is added to prevent a compile error. core/net/rime/rimeaddr.c - An initialization is added to prevent a compile error. core/net/rime/rudolph0.c - NULL is changed to 0, because NULL causes a compile error. core/net/rime/route-discovery.c - Add an argument to match the definition of nf_callbacks. cpu/z80/strcasecmp.h cpu/z80/strcasecmp.c cpu/z80/contiki-sdcc-conf.h cpu/z80/mtarch.c cpu/z80/mtarch.h cpu/z80/Makefile.z80 - New files to make compilation availble on sdcc. - Added support for multithreading.	2007-08-30 14:39:16 +00:00
ksb	bbdffcbc86	Use uip_ipaddr_copy in places where addresses are copied.	2007-08-22 10:47:37 +00:00
ksb	3337165590	Made it possible to override uip_ipaddr_copy . ... Use uip_ipaddr_copy in some places where addresses are copied.	2007-08-22 10:45:42 +00:00
nifi	df4ae2a91f	corrected function signature	2007-08-06 13:14:09 +00:00
bg-	74af5c6e47	* Sprinkle () in boolean expression to aid readability.	2007-06-28 15:16:41 +00:00