deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
7242 commits 6 branches 13 tags 80 MiB
Commit graph

1141 commits

Author SHA1 Message Date
Adam Dunkels 3a824d0ed6 Added a hysteresis when choosing a new parent: don't switch parent unless the ETX is significantly better (1.5 ETX better). 2011-02-13 14:14:16 +01:00
Joakim Eriksson 48fb9dda9e fixed of0 to respect min hop rank increase 2011-02-13 11:25:53 +01:00
nvt 20171985c6 Split the RPL header into a private and a public header. 2011-02-11 16:21:17 +01:00
Adam Dunkels 706045120f Changed the variable name local_confidence to etx to better reflect what it was used for 2011-02-11 14:18:57 +01:00
Adam Dunkels ba6bf7dd6b Rewrote the parent selection to favour parents with a low ETX and a good rank. The old parent selection would always favour parents with a lower rank, regardless of their ETX, which in some cases lead to suboptimal parent selections. Also, the old code was buggy in that it would always pick the worst parent (the one with the highest ETX). 2011-02-11 14:17:26 +01:00
Adam Dunkels bb8377dfee Set the end-of-stream flag on the TCP FIN packet 2011-02-10 22:47:45 +01:00
Joakim Eriksson d24c63c0f1 fixed so that minhoprankinc is configurable 2011-02-10 19:44:12 +01:00
Adam Dunkels 8d55a68ebe Added a PACKETBUF_ATTR_STREAM_END packet flag 2011-02-08 22:20:07 +01:00
Adam Dunkels 46348d9013 Added the low-power streaming mode where frequent channel checks are performed when streaming is on. Enabling this will (by setting WITH_STREAMING to 1), however, significantly slow down Cooja/MSPsim simulations. 2011-02-08 21:57:46 +01:00
Joakim Eriksson d518c84471 made rank calculation depend on selected parent when joining DAG 2011-02-08 19:59:50 +01:00
Nicolas Tsiftes aeca16d01f Just update the node rank and let rpl_process_parent_event take care of the rest 2011-02-07 17:29:23 +01:00
Nicolas Tsiftes e3638d2791 Updated to the minrank-hysteresis OF 2011-02-04 15:46:01 +01:00
joxe 389a4f9220 added rpl-all-nodes multicast address to nodes mcast addresses 2011-01-25 22:41:30 +00:00
adamdunkels 09c223f549 Updated Contiki X-MAC to use hardware acks, which allows for tighter timing and results in a lower duty cycle. Hardware acks also make X-MAC more robust against packet losses, as there is a direct way for the CSMA layer to detect loss of data packets. Before, Contiki X-MAC only detected loss of strobes. 2011-01-25 14:31:09 +00:00
adamdunkels d51e99a3dd Updated streaming mode to use only about 20% radio. Made guard time more conservative due to problem report by Ricklef Wohlers. 2011-01-25 14:29:46 +00:00
adamdunkels fa524fabd7 Bugfix: q->buf was not tested for NULL, as it should be. Fix by Simon Duquennoy. 2011-01-25 14:24:38 +00:00
joxe e79c0ab1ee fixed rpl so that it sends and receives on the rpl-all-nodes multicast address 2011-01-25 09:55:12 +00:00
joxe 3a643fa0c6 added address macros for rpl-all-nodes 2011-01-25 09:54:03 +00:00
adamdunkels 4b4b8fad56 More recent packet entries. Allow 4 queue entries to be dedicated to generated packets. 2011-01-18 16:05:53 +00:00
adamdunkels 808c21fbfa Bugfix: default should be 3 MAC-level retransmissions if collissions or loss occurs 2011-01-18 16:03:57 +00:00
adamdunkels affba785b5 Enabled phase-lock only for channel check rates of 32 Hz or lower 2011-01-18 16:03:19 +00:00
adamdunkels 26e3b6fdc0 Bugfix by Simon Duquennoy: don't transmit packet until previous packet has been sent by the RDC layer. 2011-01-13 19:06:22 +00:00
adamdunkels 81d23a3a36 Minor bugfixes pertaining to queue handling: if a packet was explicitly dropped, the packet would later be acknowledged despite it never being received; added a limit on how many queue entries that can be used for packets that are being forwarded, to allow for originated packets even if the forwarding queue is filled. 2011-01-10 15:10:43 +00:00
adamdunkels 70f9f075a0 Safeguard against NULL arguments 2011-01-10 15:08:52 +00:00
adamdunkels 148bd60fe1 Bugfix: the defensive retransmission timer setting must be made before the packet is transmitted, otherwise the retransmission timer will always be for the defensive retransmit 2011-01-09 23:49:27 +00:00
adamdunkels 50a3e6ea23 Increased the max ETX to allow for longer paths even with the initial conservative ETX estimate; made collect use announcements by default 2011-01-09 23:48:33 +00:00
adamdunkels acf45ec648 Bugfix: memory wasn't freed when a neighbor was dropped from the list. Also increase the max age to 180 minutes to allow for regular beacons to refresh the neighbor before it is dropped. 2011-01-09 21:20:05 +00:00
adamdunkels 90dc0ceebf Replaced default link estimator with an exponential weighted moving average, which reduces memory consumption per neighbor. 2011-01-09 21:14:22 +00:00
adamdunkels 4e91d9303e Added safeguard timer if the MAC layer would fail to call back after transmission. 2011-01-09 21:13:20 +00:00
adamdunkels a0960154ba Cleaned up parts of the code; added comments 2011-01-09 21:07:01 +00:00
nvt-se 30f5e29db7 dos2unix conversion 2011-01-05 17:01:03 +00:00
joxe 65048c519c removed some void * casts in uip code 2011-01-04 22:11:37 +00:00
nvt-se 7a43b7d832 Configuration of the objective function made easier. Updated OF0 to the new rank calculation. 2011-01-04 20:43:28 +00:00
joxe b2296e462b removed void * + changed ux_t to uintx_t 2011-01-04 20:22:21 +00:00
dak664 3c3cd868cd Allow shorter UIP_CONF_WAIT_TIMEOUT for more aggressive power saving modes. 2010-12-24 00:39:04 +00:00
dak664 322d835fee Fix avr-gcc compiler warnings 2010-12-18 22:12:53 +00:00
nvt-se 8f76c82433 Improved DAO management. 2010-12-17 15:24:25 +00:00
adamdunkels 4914739e5d Revived the timesynch module, which has been switched off since the introduction of the new radio API after Contiki 2.4. The new code uses explicit timestamp messages instead of piggybacking timestamps on every transmission. It is also significantly better in terms of exactness. 2010-12-16 22:47:38 +00:00
adamdunkels 10fb99a89d Reduced the value of the max depth, so that a count-to-infinity loop will not count too long before hitting the maximum value. This is important when a network loses its sink, so that packets are not forwarded around the network for ever. 2010-12-16 22:46:34 +00:00
adamdunkels 19e930e6f2 Changed the behaviour of retransmissions to work better with the in-order CSMA code. The retransmission timer is now set when the packet is known to be sent by the MAC layer. 2010-12-16 22:45:15 +00:00
adamdunkels 4a89cc9db3 Rework of the new CSMA in-order code that fixes a number of smalllish bugs in the in-order code. 2010-12-16 22:44:02 +00:00
adamdunkels 79f2c25dae Rework of the phase-lock optimization mechanism. There were several bugs in the existing code, such as the phase-lock would lose synchronization when a packet was lost. 2010-12-16 22:43:07 +00:00
adamdunkels 01c28ab502 Added explicit timestamp packet type, for the revived timesynch support 2010-12-16 22:41:43 +00:00
nvt-se dae3dc22f3 Corrected a comment that was accidentally overwritten in a previous commit 2010-12-15 19:57:40 +00:00
nvt-se cd08939b38 Corrected the reported ETX in the initial callback, and fixed the coding style 2010-12-15 14:35:07 +00:00
nvt-se 79ae813f88 Improved macro definitions and removed obsolete declarations. 2010-12-15 13:37:34 +00:00
nvt-se 542bbd4b31 Increased the width of dio_next_delay to avoid possible wrappings 2010-12-15 12:24:00 +00:00
nvt-se 486f202d09 Fixed problem with too large values for the DIO timer. 2010-12-15 12:12:27 +00:00
dak664 a026c94467 Fix compiler warnings 2010-12-14 22:45:22 +00:00
dak664 0a4a0ffb32 Add SICSLOWPAN_CONF_ACK_ALL for hardware autoack testing 2010-12-14 22:18:20 +00:00
dak664 240d478c1f Allow platform to specify COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME 2010-12-14 22:14:33 +00:00
adamdunkels 952dfc9384 Rework of the CSMA layer: instead of using one timer per packet, the module now uses one central timer and a queue of outgoing packets. This helps to keep packets in order, which is extremely useful for TCP transfers, and reduces the amount of congestion since consecutive packets now are spaced in time if there is a collision. Based on the observations and ideas of Simon Duquennoy. 2010-12-14 07:57:14 +00:00
dak664 0e60c99e80 Add defines to set stateful address prefixes. 2010-12-13 23:27:40 +00:00
dak664 9c66df6de1 Fix ancient RAND_MAX compiler warning 2010-12-13 16:52:02 +00:00
joxe 3e293e6cfc updated rpl dio message format to be compliant with latest version 2010-12-13 10:59:37 +00:00
nvt-se c9cc87ef25 Added support for Mode of Operation flags in DIOs. Removed obsolete destination advertisement flags. 2010-12-13 10:54:25 +00:00
joxe b66da85392 fixed comments and initialize flags in dio_output to zero 2010-12-13 09:59:46 +00:00
joxe aa1795d5c2 removed route annotation from rpl - moved to ds6 2010-12-10 22:48:31 +00:00
joxe 2c30b3c6ba added annotation for showing routes and default route during simulation 2010-12-10 22:46:58 +00:00
adamdunkels af21afa750 Make sure that the cycle timing is exact 2010-12-10 13:36:06 +00:00
adamdunkels e4cf633215 Put parenthesis around user-supplied options. Patch by Roger Larsson 2010-12-07 23:33:17 +00:00
adamdunkels c19a967973 Bugfix: with the recent bugfixes, it was no longer possible to turn duty cycling back on after it had been turned off 2010-12-07 23:12:54 +00:00
joxe e1fbb9bba0 changed neighbor state callbacks to occur only at add and remove 2010-12-07 10:36:03 +00:00
nvt-se b2a28e6fc3 Fixed error reported by Pieter Agten. The reachable time is specified in milliseconds, and must thus be divided by 1000. 2010-12-06 09:48:48 +00:00
adamdunkels 4c9793f428 Let ContikiMAC remember the state that the radio should have when duty cycling is turned off. This fixes a bug in which the radio was turned on after sending, even when NETSTACK_RDC.off(0) was enabled. 2010-12-06 09:08:22 +00:00
dak664 f34e5ec798 Convert implicit printf to PRINTF 2010-12-04 21:06:04 +00:00
dak664 e54d7d6f9c Fix compiler warnings 2010-12-02 15:55:17 +00:00
adamdunkels 6d556d5c13 Fixed bug with link-layer ACKs. Refactored the ACK reception code. 2010-11-25 08:44:34 +00:00
adamdunkels 2f66db3ded Added a debug mode that keeps track of where individual queuebufs are allocated, which is useful when debugging queuebuf leakage problems. 2010-11-25 08:43:59 +00:00
nifi 3bd78893e5 Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc. 
nullrdc (previously nullrdc-framer) is now a RDC implementation that
does not do any radio duty cycling but supports link layer addresses
and frame format via framer (for example 802.15.4). nullrdc can now be
used in the same way as contikimac, xmac, etc.

nullrdc-noframer (previously nullrdc) is a null RDC implementation
that does not do any radio duty cycling, does not add any header of its
own to the packets, and does not support link layer addresses.
 2010-11-23 18:11:00 +00:00
dak664 62d7832fff Fix compiler warning and possible bug 2010-11-13 16:37:42 +00:00
nifi 05d78522d3 Added MAC-layer duplicate message suppression when using 802.15.4 auto ack 2010-11-12 12:53:16 +00:00
adamdunkels 8f745a6ea6 Added a function for obtaining the current parent 2010-11-06 14:32:10 +00:00
adamdunkels 9750eb93bf Turn off debug messages 2010-11-03 15:41:23 +00:00
adamdunkels a891a2ffe8 Bugfix: allow ICMPv6 to send packets larger than those whose length fits in one byte. Bugfix by mathieupouillot 2010-11-03 11:56:11 +00:00
adamdunkels b7df18a96a Turned off streaming by default to save code space; made guard time a little more conservative 2010-11-02 11:00:08 +00:00
adamdunkels 1b5001b226 Bugfix: out-of-order fragments were not handled correctly. minor style fixes 2010-11-02 10:56:57 +00:00
adamdunkels 5230e64112 Use the new shared ND-packet queue buffers 2010-10-29 05:36:07 +00:00
joxe 9a1f902881 made rank use full resolution when using OF-ETX 2010-10-28 20:39:06 +00:00
adamdunkels f5031861ac When IPv6 ND kicks in, the packet that caused the ND can either be dropped or saved in a buffer to be send when the NS reply returns. This commit reimplements the buffer management to avoid having one buffer per neighbor, but instead use a buffer pool from which buffers can be allocated for different neighbors. 2010-10-28 15:42:56 +00:00
adamdunkels 677575fc8c Rewrote proactive link estimator to be invoked randomly instead of triggered by an empty queue; this makes network bootups because nodes are not synchronized 2010-10-28 15:36:02 +00:00
joxe 932fed8cc7 improved ETX calculation 2010-10-28 08:54:54 +00:00
nifi 25ceab07d2 Update annotation when removing preferred parent. 2010-10-27 12:27:57 +00:00
nifi d2a3f1f257 We found that the preferred parent should be reset in the rpl_remove_parent function. 2010-10-27 12:20:35 +00:00
nvt-se d528039f9a Created a separate function for local repair. Added a statistics structure. Improved the control of malformed packets. 2010-10-27 00:46:40 +00:00
nvt-se c2c0505402 Increased alpha to 85 in order to get slower changes in the ETX. Put back the start guess to 3. 2010-10-27 00:45:24 +00:00
joxe 43023ab425 made number of transmissions configurable 2010-10-26 13:25:32 +00:00
nvt-se 1fbc651bf3 Lowered the first guess for the ETX of a link. 2010-10-25 20:06:17 +00:00
nvt-se 127c87efcc Fixed debug printfs. Added control of max_rankinc parameter. 2010-10-25 20:03:37 +00:00
nvt-se 19d7543267 Added detection of loops in DAO forwarding. 2010-10-25 19:49:12 +00:00
adamdunkels 9ecc0437f4 Left-over debug printf removed 2010-10-25 12:25:39 +00:00
adamdunkels 42f37ca1d3 Bugfix: removed old leftover code statement 2010-10-25 11:59:09 +00:00
adamdunkels 3bbd6a00a9 Replace old neighbors according to an LRU policy when a new neighbor needs to be added 2010-10-25 11:58:07 +00:00
adamdunkels e680276954 ARP fix for multicast transmissions. (Patch by Robert Quattlebaum.) 2010-10-24 22:29:39 +00:00
adamdunkels a8848517dd UDP checksum is mandatory with IPv6. (Patch by Robert Quattlebaum.) 2010-10-24 22:28:43 +00:00
adamdunkels 77ecfb0366 Rewrote parts of the retransmission logic so that collect is robust against the situation where the MAC layer will fail to callback after a packet has been transmitted. 2010-10-24 21:08:19 +00:00
adamdunkels 8fa7bf6c31 Always restore the queuebuf to the packetbuf before calling the upper layers. Reduce the waiting time between successive MAC layer retransmissions. 2010-10-24 21:07:00 +00:00
adamdunkels 73f5535754 Made the guard time slightly more conservative - found an occasion where this was needed 2010-10-24 21:06:17 +00:00
adamdunkels 8f8741c7f0 Small style fixes 2010-10-24 21:05:42 +00:00
nvt-se 00a000cca0 Print the rank correctly in the debug output. 2010-10-22 15:40:10 +00:00
nvt-se 86823a84fb Export fix-point representation of the ETX. Make RPL temporarily use the same representation as before. 2010-10-22 13:50:13 +00:00
joxe 804d23e9f4 made DIS Interval configurable 2010-10-22 13:13:40 +00:00
joxe e414c8c5a4 added function for retrieving link etx to neighbor 2010-10-22 11:34:24 +00:00
nvt-se 6e28b1d3fb Reduced ETX_LIMIT in order to avoid overflows. Removed ETX_LOSS_PENALTY and set packet_etx to ETX_LIMIT instead upon packet loss. 2010-10-21 19:46:21 +00:00
adamdunkels 9cb830ed37 Timing bugfix in the waiting period between channel samples to check if the coast is clear before sending a packet. 2010-10-20 22:25:24 +00:00
adamdunkels 3ffcff0656 Added mechanisms for explicit de-synchronization of synchronized neighbors. Added link-layer ACKs. Fixed bugs with MAC-layer interaction. Now seems to work somewhat (didn't work at all before, in some cases), but there are still problems with packet loss. 2010-10-20 15:23:43 +00:00
adamdunkels 5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro 
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
 2010-10-19 18:29:03 +00:00
adamdunkels 34cba78ca8 Bugfix: bump advertisements only when a parent changes, not because of an upstream parent change 2010-10-19 07:34:29 +00:00
nifi e2b4956a7f Bug fix: release the packet and notify the sender if RDC returned an error 2010-10-14 19:08:39 +00:00
oliverschmidt 2f89e69ff7 Fixed build for platforms which use the default value for QUEUEBUF_NUM. 2010-10-12 19:51:28 +00:00
adamdunkels 020da4e8ba Added a function for obtaining beacon intervals 2010-10-11 23:44:24 +00:00
adamdunkels ec716ea62d Do not reduce transmission interval, unless explicitly told so with the bump flag 2010-10-11 23:43:01 +00:00
adamdunkels 37adf130b4 Rewrite of the congestion logic. A node now report it being congested 
when half the transmission queue is full. When a neighbor is heard to
be congested, the rtmetric of that node is inflated to avoid sending
more traffic in its direction.

Fixed problems with beacon intervals: intervals are now not reduced
when a path gets significantly worse, only when they get better.
 2010-10-11 23:42:01 +00:00
adamdunkels d821ba5e22 Added a lifetime for link estimates: if they are too old, they are 
reset so that a new probing period can produce more up-to-date
estimates. Added a congestion mechanism whereby a neighbor can be
marked as being congested for a period of time, during which the ETX
for the neighbor will be artificially inflated.
 2010-10-11 23:38:46 +00:00
adamdunkels 5eb4a0fe8d Rewrote the initial link estimate logic: link estimates are now 
computed only over the actual samples, not over the entire
buffer. Also, the initial link estimate is much more conservative now
(16 transmissions) to favor links that have been probed, and which
therefore are likely to have better ETXs.
 2010-10-11 23:34:02 +00:00
adamdunkels 0cabe483c3 Don't call sink recv function for zero-size packets, since these most likely are link estimate probes or keepalive packets. Explicitly set eseqno to zero when opening a new connection. 2010-10-07 15:52:28 +00:00
adamdunkels ad35c54473 Bugfix: when a node's rtmetric was lower than SIGNIFICANT_RTMETRIC_PARENT_CHANGE, its beacon timers would always be bumped to its lowest value 2010-10-05 20:06:47 +00:00
adamdunkels 52e9a6f1fb Turned the DRAW_TREE debug flag off by default 2010-10-04 22:36:47 +00:00
adamdunkels 65d640ac53 Several bugfixes to the proactive link estimate maintenance code, which is now enabled by default. Simplified DRAW_TREE code for drawing routing graph in Cooja. Added routing metric penalty to parents that are congested or that drop packets. 2010-10-04 20:27:50 +00:00
adamdunkels 212e73faa6 Removed old netsim code. Added a function for obtaining the packet attributes of a queuebuf packet. 2010-10-04 20:26:01 +00:00
joxe 4f3fc1c404 fixed xmac to use new channel check define name 2010-10-03 22:46:53 +00:00
adamdunkels ceebd7020a Bugfix: the return value sometimes was wrong when a collision was detected. 2010-10-03 20:39:24 +00:00
adamdunkels ae88ed04f1 Moved the definition of the channel check rate used by the radio duty 
cycling layer. This definition was previously held in net/mac/mac.h,
with the name MAC_CONF_CHANNEL_CHECK_RATE. But since the rate is used
by the radio duty cycling layer, it makes more sense to change its
name to reflect this. Also, the configuration option should be tied to
the netstack configuration instead.

So the new configuration option is called
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE.
 2010-10-03 20:37:32 +00:00
adamdunkels 40583fe112 Removed the polite announcement code, since it was not used, and enabled the broadcast announcement code by default. Increased the default intervals for broadcast announcements. 2010-10-03 20:10:22 +00:00
adamdunkels 605392522f Bugfixes and improvements: rtmetrics are now 16-bit clean. Added experimental feature that proactively probes neighbors that have not yet been tried out, in order to get an initial ETX for them. 2010-10-03 20:08:44 +00:00
adamdunkels d0579c8a81 Cleaned up the collect neighbor management code 2010-10-03 20:07:10 +00:00
adamdunkels b23a364397 rtmetric values should always be computed as 16-bit values 2010-10-03 20:06:25 +00:00
adamdunkels 32ba90ea4c Bugfix: make sure that neighbor exists before attempting to update tx 
count.
 2010-09-28 06:53:02 +00:00
joxe 77c5187a2e fixed bug where context is null but still referenced 2010-09-23 19:57:50 +00:00
joxe 494d2a3073 only compare with global addresses when selecting source for a specific destination 2010-09-23 18:17:27 +00:00
adamdunkels eed22a6f3c A number of changes to the collect code: 
* Added an optional "keep alive" mechanism whereby an idle network is
periodically probed by dummy packets to maintain a recent quality
metric when there is no traffic.
* Bugfix in when new routing metrics should be advertised
* Rewrote the ACK logic so that a queuebuf is not allocated for each
ack, only for those acks generated by the sink node.
* Updated the wrap-around logic for sequence numbers: when a sequence
number wraps, it won't go back to 0. Instead, it wraps to 128. This
allows us to understand when a node has rebooted: when its seqno is <
128, it has recently rebooted.
 2010-09-22 22:08:08 +00:00
adamdunkels 2cae71e89b Added a function for obtaining the link estimate and rtmetric for a neighbor 2010-09-22 22:04:55 +00:00
adamdunkels 46b2451969 Made the initial link estimate explicit 2010-09-22 22:03:21 +00:00
joxe 1dc5366b15 fixed buggy comment 2010-09-21 13:15:25 +00:00
joxe f1d19a5f9a no callback to rpl if rpl is not used 2010-09-21 13:13:09 +00:00
joxe 63ab1ffce0 clear default route when neighbour is removed 2010-09-20 15:30:12 +00:00
nvt-se 58db04ee64 Set a high penalty for packet losses. 2010-09-15 15:59:52 +00:00
nvt-se 098f4001e0 Use fixed point arithmetic in the calculations of the ETX EWMA 2010-09-15 15:10:25 +00:00
nvt-se adf6961a85 Various bug fixes and adjustments for rpl-11 2010-09-15 13:22:22 +00:00
adamdunkels 18e31f33b9 Minor tweaks. Removed debug output from CVS. 2010-09-14 06:48:36 +00:00
adamdunkels eb58968459 Added a timer to each phase structure that keeps track of for how long 
a particular receiver has not ACKed packets. After some time
(currently 16 seconds), the sender will begin sending full strobe
periods again.
 2010-09-13 13:39:05 +00:00
adamdunkels 591766e663 Significant improvements to the Collect protocol: 
* Loop detection and untangling. Now uses in-band loop detection that
  works.

* Link quality estimation. Now starts with a conservative /
  pessimistic estimate for new links.

* Retransmissions. MAC layer and network layer retransmissions are now
  decoupled.

* Loss handling. Deals better with losses now.

* Concurrent applications. Each connection now maintains its own
  neighbor table with separated cost to sink estimates for each
  connection.
 2010-09-13 13:28:14 +00:00
adamdunkels 4e0744954a Rewrite of important parts of the Collect logic: link estimation 
calculation and parent selection.  This fixes a severe bug that caused
loops when packets were erroneously retransmitted due to ACK loss.
 2010-09-08 19:21:45 +00:00
nifi f05952c926 Changed packet id to use 8 bit instead of 4 bit 2010-08-31 13:14:49 +00:00
dak664 12479c32bc Fix compiler warnings 2010-08-01 21:18:07 +00:00
nvt-se 11760059d3 The second predicate is not needed. 2010-07-03 23:52:02 +00:00
nvt-se 007d4a4001 Improved logic for processing DIOs 2010-06-28 14:51:23 +00:00
nifi 30db4eff52 Made QUEUEBUF_STATS configurable 2010-06-24 09:48:21 +00:00
nifi e965b74cf5 added missing include 2010-06-18 08:28:56 +00:00
nifi 4741b95858 added missing include 2010-06-16 10:10:10 +00:00