deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
10607 commits 6 branches 13 tags 80 MiB
Commit graph

2346 commits

Author SHA1 Message Date
George Oikonomou 4378217462 Improve sensortag external flash power management: 
* Explicitly put in deep sleep on device startup
* Verify that the flash has actually dropped to deep sleep
* Update CLK pin to match the one used on the v1.2 sensortag

Obsoletes and Closes #988
 2015-05-15 09:21:01 +01:00
George Oikonomou cf99160706 Change lpm_shutdown() API call: 
So that the caller can specify pin pull and wakeup state
 2015-05-15 09:21:01 +01:00
George Oikonomou 5644e95fb6 Fix global interrupt manipulation 2015-05-15 09:21:00 +01:00
George Oikonomou 3f310e462f Tidy-up clock configuration 2015-05-15 09:20:59 +01:00
George Oikonomou 450550a7d1 Explicitly configure Srf pins for unused peripherals 2015-05-15 09:20:59 +01:00
George Oikonomou 7a189d010b Don't power on SERIAL in the Srf's board_init 2015-05-15 09:20:59 +01:00
George Oikonomou 00a6c31158 Improve OPT sensor driver and usage 
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
 2015-05-15 09:20:59 +01:00
George Oikonomou 3ab1b836c4 Configure button pins with hysterisis 2015-05-15 09:20:58 +01:00
George Oikonomou 7641aa89f2 Tidy-up macro semicol usage 2015-05-15 09:20:58 +01:00
George Oikonomou 0b6813513c Undefine CTS/RTS pins for the SmartRF 2015-05-15 09:20:58 +01:00
George Oikonomou 883c30b4ac Handle the configuration of the TMP_RDY pin 2015-05-15 09:20:58 +01:00
George Oikonomou cee6c190c5 Use the BMP in 'forced' mode and reduce startup delay 
In forced mode, the BMP will turn itself off after a reading
 2015-05-15 09:20:57 +01:00
Antonio Lignan b50ae639b3 Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor 
Replace STH21 with HDC1000 for the CC2650 SensorTag
 2015-05-15 10:12:08 +02:00
Brad Campbell 6eaada0c3f Delete old CoAP implementation 
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
 2015-05-14 17:20:46 -04:00
Benoît Thébaudeau c9324d133f Merge pull request #1060 from g-oikonomou/cc26xx/contrib/ihex 
Produce ihex files usable with TI's Flash Programmer
 2015-05-14 19:24:36 +02:00
Benoît Thébaudeau d64927397f Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors 
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
 2015-05-14 19:21:56 +02:00
Benoît Thébaudeau 71f22b1775 Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir 
Move cc2538 startup-gcc.c to the CPU dir
 2015-05-14 18:43:39 +02:00
George Oikonomou 69c4f19336 Produce ihex files usable with TI's Flash Programmer 2015-05-14 13:22:11 +01:00
George Oikonomou 6507112b33 Remove SHT21 sources 2015-05-14 13:20:40 +01:00
George Oikonomou d5f458509d Adjust the CC26xx README to reflect new sensors 2015-05-14 13:20:39 +01:00
George Oikonomou 1384030d6e Replace SHT21 with HDC1000 driver in the tag build 2015-05-14 13:20:39 +01:00
George Oikonomou 7e3b8d6fcc Add a driver for the HDC1000 sensor 2015-05-14 13:20:39 +01:00
George Oikonomou a32598f658 Merge pull request #1059 from g-oikonomou/cc26xx/contrib/xxware-instructions 
Update CC26xxware download instructions
 2015-05-13 12:21:48 +01:00
George Oikonomou 96e1647270 Move cc2538 startup-gcc.c to the CPU dir 2015-05-13 01:31:10 +01:00
George Oikonomou 4de471478a Link and build tmp, vdd and als sensors 2015-05-12 23:42:20 +01:00
George Oikonomou 12ac8e1fb5 Initialise ADC in main, not in sensor drivers 2015-05-12 23:42:20 +01:00
George Oikonomou 3717522680 Re-work the CC2538 driver to be a driver for the Srf06 ALS only 2015-05-12 23:42:19 +01:00
Nicolas Tsiftes 44af0fa66b Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket 
New HTTP socket, DNS64, IP64 Cooja tests
 2015-05-10 17:14:31 +02:00
George Oikonomou 351b16c43c Update CC26xxware download instructions 2015-05-10 14:53:05 +01:00
Adam Dunkels 64bae5b38d Include the ip64-addr module, to make http-socket compile 2015-05-10 10:51:12 +02:00
Adam Dunkels 4a85d49a09 Include a subplatform-conf.h, which may override configuration parameters set by the cooja/contiki-conf.h 2015-05-10 10:51:12 +02:00
Adam Dunkels 81391c11a7 Need to specify the target name, which allows us to have platforms that inherit from the cooja platform, like the cooja-ip64 platform 2015-05-10 10:51:12 +02:00
Adam Dunkels bab1c48912 New Cooja platform designed for runnig IP64 routers for automated testing 2015-05-10 10:51:11 +02:00
George Oikonomou 447be526ae Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br 
Enable slip-radio and rpl-border-router for CC26xx
 2015-05-09 22:51:06 +01:00
George Oikonomou 598fd770b8 Merge pull request #960 from g-oikonomou/travis-arm-aapcs-tests 
Test cc2538dk with the recommended toolchain
 2015-05-09 22:31:18 +01:00
George Oikonomou bd5e35c968 Merge pull request #1052 from simonduq/packetbuf-cleanup 
Packetbuf cleanup
 2015-05-09 22:30:21 +01:00
Simon Duquennoy bb76bb8beb Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled. 2015-05-06 16:34:26 +02:00
George Oikonomou d808978149 Improve platform README 2015-05-03 22:36:04 +01:00
George Oikonomou 0327eea109 Printf Driverlib version at startup 2015-05-03 22:36:04 +01:00
George Oikonomou 77874dc02b Remove unused configuration defines 2015-05-03 22:36:03 +01:00
George Oikonomou f83c4e7286 Improve code style 2015-05-03 22:36:03 +01:00
George Oikonomou 1d97e7e11e Improve Reed Relay macro and comments for clarity 2015-05-03 22:36:03 +01:00
George Oikonomou 8c55bc3f3d Remove obsolete/unused make variables 2015-05-03 22:36:03 +01:00
George Oikonomou a72d90e283 Control TCP MSS in the project's conf 2015-05-03 13:31:03 +01:00
George Oikonomou 364fc9cacf Define button_sensor in contiki-conf.h 2015-05-03 13:30:59 +01:00
Oliver Schmidt 05d98ffca3 Adjusted some Win32 config values. 2015-05-02 00:17:53 +02:00
Oliver Schmidt 9aee07c9ad Leverage the recently added exec() cmdline support in the cc65 C library for the Apple ][. 2015-04-26 21:45:33 +02:00
Oliver Schmidt a824722862 Merge remote-tracking branch 'upstream/master' 2015-04-26 14:35:40 +02:00
David Rabel 29e62c4e20 SERVO_OFFSET deleted, SERVO_MIN added 2015-04-03 15:55:00 +02:00
David Rabel 41163406c2 Use OCR3 instead of OCR1 for servo 2015-04-03 15:49:17 +02:00
David Rabel 235f368340 Bugfix: missing braces added in serco_set() 2015-04-03 15:47:15 +02:00
Nicolas Tsiftes 8f50d9709d Merge pull request #999 from adamdunkels/lebrush-rdnss-support-rebased 
RDNSS support, again
 2015-03-30 17:21:23 +02:00
George Oikonomou 7238a1628f Merge pull request #1004 from alignan/z1-reed-sensor 
Added Reed Sensor driver, example, and minor fix to the SHT25 sensor driver
 2015-03-30 15:05:05 +01:00
Antonio Lignan b9334a3b0e Added Reed Sensor driver and example 2015-03-30 10:30:09 +02:00
Gaëtan Harter d0232bb20d Remove unused UIP_CONF_ND6_ defines in platforms 
UIP_CONF_ND6_MAX_PREFIXE
  UIP_CONF_ND6_MAX_DEFROUTERS
 2015-03-24 13:09:29 +01:00
Gaëtan Harter 697d8c0d23 Remove siclowpan compressions define in platforms 
Several platforms defined compressions modes values:

    SICSLOWPAN_CONF_COMPRESSION_IPV6
    SICSLOWPAN_CONF_COMPRESSION_HC1
    SICSLOWPAN_CONF_COMPRESSION_HC01

instead of using the global SICSLOWPAN_COMPRESSION_LEVEL definitions
 2015-03-24 11:40:32 +01:00
Gaëtan Harter 60719b8239 Remove unused SICSLOWPAN_CONF_CONVENTIONAL_MAC 2015-03-24 11:18:25 +01:00
Harald Pichler 560117e8f3 Merge branch 'contiki' into osd 2015-03-23 13:07:28 +01:00
Harald Pichler 0097d192be move dht11 define to project.conf 2015-03-23 13:03:32 +01:00
Antonio Lignan 64fd000e5d Removed duplicated condition in sht25 configuration 2015-03-11 14:25:23 +01:00
Antonio Lignan 1af29a5beb Added SHT25 sensor 2015-03-10 15:33:58 +01:00
George Oikonomou cd219e206c Adjust the cc2538dk readme to reflect travis test changes 2015-03-02 08:41:53 +00:00
George Oikonomou 0ba7f8df52 Merge pull request #951 from hrzr/master 
Make the CC2538DK button sensor clearer to work with
 2015-02-28 15:14:53 +00:00
Jonas Olsson c9071b6952 Add CC26xx common platform files 2015-02-25 13:12:20 +01:00
Jonas Olsson b385933fa8 Add SensorTag CC2650 files 2015-02-25 13:11:09 +01:00
Jonas Olsson c7d85c3ea5 Add Srf06EB + CC26xx EM files 2015-02-25 13:10:26 +01:00
Oliver Schmidt da536cb07c Removed superfluous AppleCommander parameters. 2015-02-21 17:16:08 +01:00
Mikhail Gaivoronskii 3f2869824c Uncrustified platform/cc2538dk/dev/button-sensor.c 2015-02-20 21:53:33 +05:00
Harald Pichler d31ecbf486 Merge branch 'contiki' into osd 2015-02-18 10:04:47 +01:00
Nicolas Tsiftes e58aae1dcd Merge pull request #950 from patoman007/master 
Fix: Misconfigurations to compile for avr-zigbit platform
 2015-02-17 09:41:20 +01:00
George Oikonomou 6bd8bb05f6 Improve wording 2015-02-16 10:17:58 +01:00
George Oikonomou 72914369e8 Re-structure CC2538 doxygen module hierarchy 2015-02-16 10:17:58 +01:00
George Oikonomou 8751e55c94 Improve wording, fix warnigs in the SSI/SPI docs 2015-02-16 10:17:58 +01:00
George Oikonomou b6bd556805 Fix clock.h warnings caused by multiple, conflicting documentation blocks of clock functions 2015-02-15 21:48:30 +01:00
George Oikonomou fb22e15844 Fix warnings caused by incorrect param names / undocumented params 2015-02-15 20:11:08 +01:00
Nicolas Tsiftes 277dc8e174 Merge pull request #826 from alignan/fix_octal 
Remove leading zeros from node id
 2015-02-11 22:35:02 +01:00
Harald Pichler 6730ec16c8 Merge branch 'contiki' into osd 2015-02-10 15:13:21 +01:00
Thomas Weber f06bd06b79 corrected line - #if UIP_CONF_IPV6 - in contiki-rcb-main.c to - #if NETSTACK_CONF_WITH_IPV6 - 2015-02-02 22:08:35 +01:00
PAtO! 2c2b930648 Fix: Misconfigurations to compile for avr-zigbit platform 2015-01-29 14:31:47 -03:00
Ralf Schlatterbeck c8be130f2e Finally fix LED-Strip driver 
.. and adapt led-strip.c to changed polarity (again).
 2015-01-26 20:44:30 +01:00
Ralf Schlatterbeck a2357e648e Invert LED count, use fixed led driver 2015-01-25 19:04:04 +01:00
Ralf Schlatterbeck e946cd4c13 Add LED strip example 
.. not yet working
 2015-01-25 18:31:17 +01:00
Thomas Weber d575f1a6ce added missing modules in Makefile.avr-rcb, added netstack init functions (to start the at86rf230, modified macros to increase the buffersize) 2015-01-17 19:19:16 +01:00
Harald Pichler ff29ab2c94 bugfix define framer and llsec 2015-01-16 22:22:16 +01:00
Harald Pichler 000d37a7fc update modules remove llsec 2015-01-16 15:03:37 +01:00
Víctor Ariño ccc0d27da0 Integrates uip-nameserver API 
On the same commit the src have been uncrustified and some typo
fixes as well as includes missing.
 2015-01-09 09:44:06 +01:00
Harald Pichler fb473237ce bugfix modules 2014-12-29 11:02:51 +01:00
Harald Pichler 9efc5d41c1 Merge branch 'contiki' into osd 2014-12-29 08:20:00 +01:00
George Oikonomou 8fe5456588 Change default PAN ID for the CC2538DK platform to 0xABCD 2014-12-08 22:33:33 +00:00
George Oikonomou 73a133373a Change CC2530DK default PAN ID to 0xABCD and make it configurable by project-conf.h 2014-12-08 22:33:11 +00:00
Harald Pichler ed161d1905 NETSTACK_CONF_WITH_IPV6 2014-12-07 17:36:53 +01:00
Harald Pichler a02be51f08 Merge branch 'contiki' into osd 2014-12-07 15:24:00 +01:00
Simon Duquennoy c2ca3e9fdb Cleanup UIP_CONF_IPV6_RPL configuration 2014-12-02 12:38:55 +01:00
Simon Duquennoy 6891bcdd20 Remove unneeded module inclusion from avr and seedeye platforms 2014-12-01 21:06:01 +01:00
Simon Duquennoy 0d9815e08b WITH_UIP6 -> NETSTACK_CONF_WITH_IPV6 2014-12-01 21:04:54 +01:00
Simon Duquennoy a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy 229c53a2e6 Cooja platform: do not include the rime module by default 2014-12-01 20:13:10 +01:00
Simon Duquennoy e85f41ffa0 Get IPv6 to fit in micaz platform again 2014-12-01 20:13:09 +01:00
Simon Duquennoy 722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
Nicolas Tsiftes d820feadd6 Merge pull request #792 from wchyan/master 
atmega128rfa1: Fix the default build error
 2014-11-28 19:23:26 +01:00