fros4943
f9e4ebf7cf
updated test configs: the test should normally not specify the network configuration, but rather use the default in the application directory
2010-03-10 12:29:24 +00:00
adamdunkels
486f7f9728
Rewrite of the Sky shell collect test. The new test is better equipped
...
to handle reordered packets - unlike the previous test, the new test
counts all incoming packets in the data stream, even those that are
significantly reordered. The new test also shows the received packets
and their hop counts in a much more readable fashion.
2010-02-28 08:25:36 +00:00
adamdunkels
14bc9aa98b
New and improved shell collect test: the new test sends out 10 packets from each node and counts the received packets. If less than 10 packets from each node is received, the test fails
2010-02-23 18:46:20 +00:00
adamdunkels
9011013fb0
Automated test for testing IPv6/6lowpan fragmentation
2010-02-06 09:57:14 +00:00
adamdunkels
5e62a0dd20
Bugfix: the cxmac and lpp netperf tests didn't actually run cxmac and lpp
2010-02-04 08:02:09 +00:00
fros4943
ddf498a065
write command was removed from sky-shell, which requires a test update
2010-02-04 00:07:18 +00:00
adamdunkels
028239e1a3
Added a timeout before the button is pressed, to allow it to initialize
2010-02-03 21:24:24 +00:00
fros4943
a13b6697df
explicit make clean before compiling firmwares
2010-02-03 21:16:13 +00:00
adamdunkels
2e7ade836e
Wait 1s before pressing the button to give the button sensor time to activate
2010-02-03 20:57:50 +00:00
fros4943
4776328731
fixed paths
2010-02-03 16:25:31 +00:00
fros4943
a15f424753
added application-level mote (/tools/cooja/examples/appmote_rimeabc) to cross-level test
2010-02-03 15:22:58 +00:00
fros4943
1246174525
compile with nullmac + require all nodes to receive at least 3 messages before test ok
2010-02-03 14:14:57 +00:00
adamdunkels
6fd46e0582
Nightly tests for LPP and CXMAC duty cycling protocols
2010-01-31 20:29:56 +00:00
adamdunkels
fcd50868aa
Moved the TIMEOUT() definition until after the print_stats() definition so that the print_stats() function can be called when the TIMEOUT() is invoked
2010-01-31 19:18:26 +00:00
fros4943
057750b109
test update: corrected write newlines, increased initial wait before issuing the first sendcmd()
2010-01-22 17:09:07 +00:00
fros4943
7c924089da
improved test: reading files with blocksize 13, verifying the complete file30.txt output, no newlines when writing mote commands
2010-01-22 16:57:56 +00:00
fros4943
8f296ac2fb
updated test: testing ESB<->Sky comm + improved test output
2010-01-22 13:56:42 +00:00
fros4943
de93c85292
increased esb helloworld test timeout
2010-01-22 13:12:31 +00:00
fros4943
9ec2b64008
added ESB helloworld test (cloned from Sky)
2009-12-02 17:16:57 +00:00
nvt-se
a96e8a33b3
removed interference because it covered several hops and caused problems with x-mac broadcasts
2009-11-20 14:51:30 +00:00
fros4943
445d6b6a72
test script bug fix: serial writes to motes should not include a newline.
...
the additional newline character was earlier (wrongly) dropped by the serial line module, but is now handled by the ringbuf-based serial line implementation
2009-11-14 11:52:03 +00:00
fros4943
8283ccf750
fixed cooja test info
2009-11-14 11:33:44 +00:00
fros4943
d71fe1d25f
added delay before starting ping process
2009-11-14 10:58:28 +00:00
adamdunkels
d41a050310
Nightly test for the netperf shell command
2009-11-08 20:02:33 +00:00
adamdunkels
78fd88d0ec
Print stats even when test fails
2009-11-03 09:27:11 +00:00
fros4943
edd94c00b0
increased timeout to 80sec (new mspsim is more accurate emulating flash memory timing)
2009-10-27 15:47:37 +00:00
adamdunkels
b4be72be7d
Removed use of NULLMAC
2009-10-19 21:42:39 +00:00
adamdunkels
1b26fcd5c7
Increased timeout
2009-10-19 20:50:16 +00:00
adamdunkels
4ef2f4f6b5
Reduced interference range
2009-10-19 20:48:43 +00:00
adamdunkels
f9d00bc8bf
Reduced the number of packets that needs to be received
2009-10-19 20:47:28 +00:00
adamdunkels
5dd7f44162
Increased the transmission time to 40 seconds from 20 seconds
2009-10-02 09:10:08 +00:00
nifi
1f9642039e
increased timeout due to better timing in new version of MSPSim
2009-09-28 09:46:54 +00:00
fros4943
fcfb68e329
added micaz port hello world test
2009-09-17 14:00:50 +00:00
nifi
1cdbda249a
enable routing for test (UIP_CONF_ROUTER is now disabled by default for platform sky)
2009-06-29 09:58:14 +00:00
fros4943
eb964b9dc6
added make clean + added an extra compilation command with CORE enabled
2009-06-26 13:56:20 +00:00
fros4943
a4bc10edfa
+ verifies the base64 encoded executable stored in flash
2009-06-26 13:26:48 +00:00
fros4943
242d8edf03
more debugging output when test fails
2009-06-26 11:30:36 +00:00
fros4943
c66b8422ee
bug fix: RUN_TEST removed the aggrerated log + simplified code
2009-06-25 11:10:50 +00:00
nvt-se
c1b2607161
removed deprecated WITH_NULLMAC setting for IPv6.
2009-06-24 16:32:45 +00:00
fros4943
2a5781566f
moved test scripts into simulation config (.csc)
2009-06-24 14:42:50 +00:00
fros4943
28a9b815b5
minor script updates
2009-06-24 14:41:47 +00:00
fros4943
8b01f0e3aa
cooja runtime arguments updated
2009-06-09 09:49:14 +00:00
fros4943
0f924ed2dd
fix: report test success by log.testOK()
2009-05-26 14:52:09 +00:00
fros4943
6ddc3642bf
fix: Contiki path printout
2009-05-26 14:36:26 +00:00
fros4943
a5ec895bf7
updated cross level test: bug fix + more debug info
2009-05-26 14:05:35 +00:00
fros4943
78979dba0d
test update: verify base64 data uploaded via serial port
2009-05-18 10:19:34 +00:00
fros4943
49520f6f38
script for running several repeated tests
2009-05-18 09:08:48 +00:00
fros4943
fa4a22412a
test update: delay a few seconds before pinging the node
2009-05-18 08:03:40 +00:00
fros4943
332d1f45c0
running test with simulation delay to avoid test timeout while external ping process has not finished
2009-04-23 10:53:32 +00:00
fros4943
964310303d
cloned sky ip ping test, but for contiki motes
2009-04-23 10:43:16 +00:00
