Jonas Olsson
f4576a635f
Document CC26xx/CC13xx border router and slip-radio
2015-08-23 20:41:12 +01:00
Jonas Olsson
3d19b0036e
Add support for SmarfRF06 + CC1310EM
...
This commit updates the srf06-cc26xx platform by adding support for the CC1310EM.
We generalise the way this platform selects CPU/board so that we can easily add more combinations in the future. These changes have implication on how to build for different devices, so make sure to have a look at the updated README
2015-08-23 19:54:43 +01:00
George Oikonomou
541688235c
Update the CC26xx README in terms of CC26xxware
2015-05-17 15:01:02 +01:00
George Oikonomou
b4067560ba
Remove references to obsolete peripheral clock scaling functions
2015-05-17 15:01:01 +01:00
George Oikonomou
8b1f2ef33c
Reset I2C with HAPI call instead of register access
2015-05-17 15:01:00 +01:00
George Oikonomou
7a5b670f76
Remove references to IOC_JTAG_DISABLE
2015-05-17 14:09:52 +01:00
George Oikonomou
32840db66b
Update driverlib version macros
2015-05-17 14:09:51 +01:00
George Oikonomou
7ae3cd49ba
Make sure SSI0 is powered and clocked before accessing it
...
* Fail all SSI0 operations if the module is not powered and clocked
* Make sure SERIAL is powered before trying to enable run mode clock
2015-05-15 11:38:20 +01:00
George Oikonomou
019143226b
Adjust main:
...
* Re-order OSC, VIMS cache, I/O latch configuration instructions
* Don't automatically enable UART RX: Let the example decide this
2015-05-15 09:21:04 +01:00
George Oikonomou
6e7d52b5df
Improve MPU power-cycling logic:
...
* Keep MPU_PWR low when the sensor is not in use
* Deselect the sensor when not in use, in order to restore the I2C ping state
* Explicitly control the MPU_INT pin
* Don't shutdown the sensor when it's shut down
* Remove explicit shutdown-related API extension. It is no longer required
2015-05-15 09:21:04 +01:00
George Oikonomou
dcf0d11050
Re-map tag UART-related IOID defines
2015-05-15 09:21:03 +01:00
George Oikonomou
2cc59c524a
Configure pins for unused tag peripherals
2015-05-15 09:21:03 +01:00
George Oikonomou
e893c914b6
Set SPI pins to a low leakage state
2015-05-15 09:21:03 +01:00
George Oikonomou
421fbfae25
Change the LPM locks API:
...
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.
This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
George Oikonomou
0e92b508b3
Don't clock GPT0 on device startup
2015-05-15 09:21:02 +01:00
George Oikonomou
6611acadc7
Don't fire-up SERIAL automatically
2015-05-15 09:21:02 +01:00
George Oikonomou
34be012661
Improve I2C power-cycling logic:
...
We only power, clock and enable the peripepheral when / if we need it
* We no longer automatically turn on the SERIAL PD when the CM3 is running
* Make sure the I2C peripheral is accessible (powered and clocked) before any operation
* If the peripheral is not accessible, automatically power it up and run the clock
* Put SDA, SCL, SDA HP and SCL HP in a low-leakage state when shutting down
* Don't automatically fire up the I2C controller when we wake up
2015-05-15 09:21:02 +01:00
George Oikonomou
0ad4b5f323
Add the ability to put the I2C in a known/default state
2015-05-15 09:21:01 +01:00
George Oikonomou
d1a1c16bd0
Define pins for more sensortag peripherals
2015-05-15 09:21:01 +01:00
George Oikonomou
4378217462
Improve sensortag external flash power management:
...
* Explicitly put in deep sleep on device startup
* Verify that the flash has actually dropped to deep sleep
* Update CLK pin to match the one used on the v1.2 sensortag
Obsoletes and Closes #988
2015-05-15 09:21:01 +01:00
George Oikonomou
cf99160706
Change lpm_shutdown() API call:
...
So that the caller can specify pin pull and wakeup state
2015-05-15 09:21:01 +01:00
George Oikonomou
5644e95fb6
Fix global interrupt manipulation
2015-05-15 09:21:00 +01:00
George Oikonomou
3f310e462f
Tidy-up clock configuration
2015-05-15 09:20:59 +01:00
George Oikonomou
450550a7d1
Explicitly configure Srf pins for unused peripherals
2015-05-15 09:20:59 +01:00
George Oikonomou
7a189d010b
Don't power on SERIAL in the Srf's board_init
2015-05-15 09:20:59 +01:00
George Oikonomou
00a6c31158
Improve OPT sensor driver and usage
...
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
George Oikonomou
3ab1b836c4
Configure button pins with hysterisis
2015-05-15 09:20:58 +01:00
George Oikonomou
7641aa89f2
Tidy-up macro semicol usage
2015-05-15 09:20:58 +01:00
George Oikonomou
0b6813513c
Undefine CTS/RTS pins for the SmartRF
2015-05-15 09:20:58 +01:00
George Oikonomou
883c30b4ac
Handle the configuration of the TMP_RDY pin
2015-05-15 09:20:58 +01:00
George Oikonomou
cee6c190c5
Use the BMP in 'forced' mode and reduce startup delay
...
In forced mode, the BMP will turn itself off after a reading
2015-05-15 09:20:57 +01:00
Antonio Lignan
b50ae639b3
Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
...
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
George Oikonomou
69c4f19336
Produce ihex files usable with TI's Flash Programmer
2015-05-14 13:22:11 +01:00
George Oikonomou
6507112b33
Remove SHT21 sources
2015-05-14 13:20:40 +01:00
George Oikonomou
d5f458509d
Adjust the CC26xx README to reflect new sensors
2015-05-14 13:20:39 +01:00
George Oikonomou
1384030d6e
Replace SHT21 with HDC1000 driver in the tag build
2015-05-14 13:20:39 +01:00
George Oikonomou
7e3b8d6fcc
Add a driver for the HDC1000 sensor
2015-05-14 13:20:39 +01:00
George Oikonomou
351b16c43c
Update CC26xxware download instructions
2015-05-10 14:53:05 +01:00
George Oikonomou
447be526ae
Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br
...
Enable slip-radio and rpl-border-router for CC26xx
2015-05-09 22:51:06 +01:00
George Oikonomou
d808978149
Improve platform README
2015-05-03 22:36:04 +01:00
George Oikonomou
0327eea109
Printf Driverlib version at startup
2015-05-03 22:36:04 +01:00
George Oikonomou
77874dc02b
Remove unused configuration defines
2015-05-03 22:36:03 +01:00
George Oikonomou
f83c4e7286
Improve code style
2015-05-03 22:36:03 +01:00
George Oikonomou
1d97e7e11e
Improve Reed Relay macro and comments for clarity
2015-05-03 22:36:03 +01:00
George Oikonomou
8c55bc3f3d
Remove obsolete/unused make variables
2015-05-03 22:36:03 +01:00
George Oikonomou
a72d90e283
Control TCP MSS in the project's conf
2015-05-03 13:31:03 +01:00
George Oikonomou
364fc9cacf
Define button_sensor in contiki-conf.h
2015-05-03 13:30:59 +01:00
Jonas Olsson
c9071b6952
Add CC26xx common platform files
2015-02-25 13:12:20 +01:00
Jonas Olsson
b385933fa8
Add SensorTag CC2650 files
2015-02-25 13:11:09 +01:00
Jonas Olsson
c7d85c3ea5
Add Srf06EB + CC26xx EM files
2015-02-25 13:10:26 +01:00