George Oikonomou
|
7854ee499a
|
Wrapped cc2x30 SOFT_RESET() macro inside do {...} while(0)
|
2012-03-29 13:11:04 +01:00 |
|
|
George Oikonomou
|
5afdd19403
|
Adjusted check to determine if we are being built with SDCC
Since rev #7342, SDCC defines __SDCC_mcs51 instead of SDCC_mcs51.
We check for either
|
2012-03-29 13:10:25 +01:00 |
|
|
George Oikonomou
|
4f1e251603
|
Some uN_t had crept back in cc2530dk and sensinode.
Changed to uintN_t plus a bit of code formatting
|
2012-03-29 13:10:10 +01:00 |
|
simonduq
|
946f00bf7b
|
stm32w: added ability to upload and reset all connected boards, and login using MOTE=x
|
2012-03-26 23:00:44 +02:00 |
|
|
simonduq
|
95ae5c5d51
|
avoid unnecessary symbols.c/h copying
|
2012-03-26 23:00:43 +02:00 |
|
|
George Oikonomou
|
ad256e5014
|
New platform: TI cc2530 Development Kit
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
|
2012-03-23 14:41:07 +00:00 |
|
|
George Oikonomou
|
b7674c3636
|
Reincarnate the sensinode/cc2430 port
|
2012-03-23 14:41:07 +00:00 |
|
|
simonduq
|
e4fb360262
|
stm32w platforms: contikimac support in the Rime case, with EUI-64
|
2012-03-20 17:30:59 +01:00 |
|
|
simonduq
|
5da4463236
|
adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La)
|
2012-03-20 17:29:58 +01:00 |
|
Niclas Finne
|
ff7a977dc7
|
Improved support for the IAR compiler for the MSP430 platforms
|
2012-03-07 23:09:05 +01:00 |
|
|
Niclas Finne
|
684c3edfa6
|
Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood.
|
2012-03-07 23:04:52 +01:00 |
|
|
Niclas Finne
|
2eee14a1d8
|
Allow compiler flag SMALL to be set to disable SMALL-build. Patch by Andre Frimberger.
|
2012-03-06 15:35:20 +01:00 |
|
Ilya Dmitrichenko
|
49cd7878e3
|
Avoid deprecated error on Darwin.
|
2012-03-02 15:15:47 -05:00 |
|
|
Ilya Dmitrichenko
|
499d3052ee
|
Fixed TARGET=native compilation issues on Darwin.
|
2012-03-02 15:15:42 -05:00 |
|
David Kopf
|
2b7ecefce7
|
Remove unused SPI initializer flag from AVR. Comment out in the msp-430 template.
|
2012-02-27 17:05:22 -05:00 |
|
|
Ilya Dmitrichenko
|
9c99d46e24
|
Simplified host OS platform detection in Makefiles
|
2012-02-25 10:09:33 -05:00 |
|
|
David Kopf
|
deb75d3d97
|
Several bugfixes
|
2012-02-21 11:14:52 -05:00 |
|
|
David Kopf
|
59e459e0e9
|
Add missing mtarch_stop function
|
2012-02-21 11:11:53 -05:00 |
|
|
David Kopf
|
6e45dfe5ff
|
PROGMEM changes needed for newer avr-gcc compiler
|
2012-02-21 11:10:57 -05:00 |
|
Nicholas J Humfrey
|
1cda3da17e
|
Converted u8_t to uint8_t and u16_t to uint16_t in the cpu directory.
|
2012-02-21 08:33:24 -05:00 |
|
Mariano Alvira
|
68591919e6
|
mc1322x: add -MMD to Makefile.mc1322x to correctly create dependencies
|
2012-02-16 11:17:15 -05:00 |
|
|
Mariano Alvira
|
43062b6d74
|
mc1322x: change how board.h works to allow default board.h (defaults
to econotag)
|
2012-02-13 10:01:36 -05:00 |
|
|
Mariano Alvira
|
ee8f2c669e
|
mc1322x: remove symbols.{c,h}
|
2012-02-13 10:01:36 -05:00 |
|
|
David Kopf
|
9d6542d49b
|
Fix minimal-net webserver6, broken after native border router changes.
|
2012-02-11 15:03:24 -05:00 |
|
|
David Kopf
|
38267bfd5a
|
Webserver-nano: Add page load times, remove workaround code for bug in arm strformat.c, correct the double count of leading zeros there.
|
2012-02-11 14:58:35 -05:00 |
|
|
David Kopf
|
987906be97
|
rf230bb updates: involves setting the 801.15.4 pending bit,
0x800000 cpu clock, and a jtag reset bugfix
|
2012-02-01 14:16:39 -07:00 |
|
Ivan Delamer
|
57e686179c
|
Improved rf230bb.c synchronization/locking. Removed unnecessary locks
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
|
2012-02-01 13:37:45 -07:00 |
|
|
David Kopf
|
7ca141b457
|
Access uart registers directly instead of through intermediate addresses in a RAM struct.
Add a platform define to reduce the number of ports supported by the cpu.
|
2012-01-21 13:49:58 -05:00 |
|
|
Niclas Finne
|
f26920ae9b
|
Define the BV macro if not already defined
|
2012-01-11 08:46:16 +01:00 |
|
|
David Kopf
|
58298f59db
|
Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
|
2012-01-10 12:42:27 -05:00 |
|
|
Niclas Finne
|
f3db12c19d
|
MSP430 setup for f2xxx based on Z1
|
2012-01-09 14:56:03 +01:00 |
|
|
Niclas Finne
|
9ffcd53868
|
Fixed compiler warning (with IAR compiler)
|
2012-01-09 14:56:00 +01:00 |
|
|
Niclas Finne
|
3daa822f89
|
Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc)
|
2012-01-09 14:55:57 +01:00 |
|
|
Niclas Finne
|
fd81a0d393
|
Minor cleanup (avoid setting some compiler flags twice)
|
2012-01-09 14:55:54 +01:00 |
|
|
Niclas Finne
|
8e1e12dfd3
|
Ignore SMALL when using IAR compiler
|
2012-01-09 14:55:48 +01:00 |
|
Nicolas Tsiftes
|
eba64bdc5e
|
Be more explicit with the relationship between inheritance between MSP430 families.
|
2012-01-09 14:55:45 +01:00 |
|
|
Niclas Finne
|
cdfa8708e3
|
* Added f2xxx for two series (for example z1)
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
|
2012-01-09 14:54:57 +01:00 |
|
|
Niclas Finne
|
f4f84ffca4
|
Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X
|
2012-01-09 14:54:01 +01:00 |
|
|
Niclas Finne
|
09082f02fe
|
Changed clock_delay to use the nop instruction
|
2012-01-09 14:49:39 +01:00 |
|
|
Niclas Finne
|
cd4be4927a
|
Fixed quick dco sync to also work with mspgcc
|
2012-01-09 14:41:42 +01:00 |
|
|
Niclas Finne
|
708f9d77d2
|
Corrected timing for higher CPU speed
|
2012-01-09 14:41:36 +01:00 |
|
|
Niclas Finne
|
05b10eb9ce
|
Initial WiSMote port based on code from Arago Systems.
|
2012-01-09 12:25:06 +01:00 |
|
|
Niclas Finne
|
367c82a5ab
|
added compiler flags and macros for IAR and mspgcc 4.4.5 compilers
|
2012-01-09 12:24:33 +01:00 |
|
|
David Kopf
|
b251619a2f
|
Add wpcap for cygwin/Windows native border router
|
2012-01-08 13:37:56 -05:00 |
|
Fredrik Osterlind
|
2644057fb2
|
using dma by default
|
2011-12-21 10:53:18 +01:00 |
|
|
David Kopf
|
81af871db9
|
Bugfix: use 16 bit tick count to adjust clock after sleep
|
2011-12-01 09:58:55 -05:00 |
|
Oliver Schmidt
|
e38f008b9b
|
The dependency on the ucontext functions has the potential to keep others from successfully using cpu/native for other platforms. As the Contiki multithreading library typically isn't used at all it's not worth the trouble. So we just limit it to Windows and Linux - where it is known to not only build but actually work. If someone needs the Contiki cpu/native multithreading library on another platform he's certainly welcome to add that platform - hopefully by just activating the codepath that we now made exclusive for Linux for his platform.
|
2011-11-30 23:41:39 +01:00 |
|
|
David Kopf
|
fb977cb9ef
|
Better fix for hardware FCS error on JTAG reset
Correct silly error introduced by trying to save two bytes.
|
2011-11-15 13:24:58 -05:00 |
|
|
David Kopf
|
31ba84eb75
|
Improve rf23x cca procesing
Fix delay_loop timing bug by using long long calculation.
128rfa1 and rf230 both working with contikimac RDC
|
2011-11-14 11:49:58 -05:00 |
|
|
David Kopf
|
d1cd3f213c
|
Add general unsupported interrupt vector suggested by Daniel Willmann
|
2011-11-14 11:36:18 -05:00 |
|