Commit graph

1169 commits

Author SHA1 Message Date
kkrentz 4493783ce9 'free_packet' in csma.c conflicted with 'free_packet' in maca.c 2014-08-04 01:09:57 -07:00
Jim Paris 4aa2a8b95c aducrf101: Add stack pointer sampling, to help debug overflows 2014-07-29 18:25:55 -04:00
Jim Paris 3e193cca2c aducrf101: Rearrange stack and heap to maximize available stack space
Stack now starts at the top of RAM, heap starts after BSS, and
they grow towards each other.
2014-07-29 18:09:16 -04:00
Nicolas Tsiftes 582bfcb8c6 Merge pull request #696 from sieben/doc
Correct several doxygen tags (\file,...)
2014-07-28 11:42:41 +02:00
Rémy Léone 8c3fa17ec0 Correct several doxygen tags (\file) 2014-07-28 11:11:45 +02:00
Jim Paris 6db05caed9 Fix radio hangups when trying to transmit with radio off.
The border-router tries to transmit and do other stuff after turning
the radio off, and the radio driver didn't handle that very well.
With this fix, it's no longer necessary to reset the border router
after starting tunslip6.
2014-07-23 16:21:53 -04:00
Jim Paris 07201d13a3 Add IAR compiler support for ADuCRF101 2014-07-23 16:21:53 -04:00
Jim Paris a4a3eca41d Add sniffer support to ADuCRF101
This works with the examples/cc2538dk/sniffer/ project and the
corresponding "sensniff" host-side tool.
2014-07-22 21:18:17 -04:00
Jim Paris 6967fc67c1 Add dummy uart0/uart1 headers that some examples require 2014-07-22 21:18:16 -04:00
Jim Paris ad141b00fb Implement rtimers for ADuCRF101 2014-07-22 21:18:16 -04:00
Jim Paris 4cb97a3311 Move RF RX into its own process 2014-07-22 21:18:16 -04:00
Jim Paris fff8a18b99 Fix ADI radio engine driver and add hook for packet reception 2014-07-22 21:18:16 -04:00
Jim Paris b7373edf8c Add ADuCRF101 radio driver 2014-07-22 21:18:16 -04:00
Jim Paris baa6058839 Add initial ADuCRF101 CPU support 2014-07-22 21:18:16 -04:00
Jim Paris 2be02cd269 Add CMSIS library code from ARM 2014-07-22 21:12:17 -04:00
Jim Paris ee1ca8ac55 Add ADuCRF101 library code from Analog Devices 2014-07-22 21:12:17 -04:00
Oliver Schmidt 919b6919a5 Fixed hardware detection.
The previous chip detection was inspired by the old IP65 driver code. For some reason it didn't work as expected. The new code is simpler and based on this statement in the chip datasheet: "The upper byte always reads as 33h and can be used to help determine the I/O location of the LAN91C96."
2014-07-12 11:27:52 +02:00
Rémy Léone f111058472 Removing trailing whitespaces 2014-06-30 20:01:05 +02:00
Antonio Lignan 3d64b80e40 Added flags to enable 20-bit support from msp430-gcc 4.7.x 2014-06-17 12:55:08 +02:00
Oliver Schmidt d955b179eb Merge remote-tracking branch 'upstream/master' 2014-06-12 22:57:46 +02:00
Oliver Schmidt a5d7a06027 Enhanced Ethernet drivers.
Made Ethernet drivers easier to consume by assembly programs.
* Replaced function pointers with JMP instructions.
* Provide return values additionally via Carry flag.

Reset Ethernet chips on initialization.
Both for the CS8900A and the W5100 the data sheets just say that
the RESET bit is automatically cleared after the RESET. This may
be interpreted in two ways:
1) There's no need to be afraid of reading the RESET bit as 1 and
unintentionally trigger a RESET by writing it back after ORing in
some other bit.
2) The RESET process isn't complete before the RESET bit hasn't
become 0 again.
It's impossible for me to empirically falsify the latter option
as the drivers are supposed to work on faster machines than the
ones I have access to. And if the RESET process includes things
like oscillators then the time to complete the RESET could differ
even between multiple exemplars of the same chip. Therefore I
opted to presume the latter option.
However that means a non-exsistent chip may cause an infinite
loop while waiting for the RESET bit to be cleared so I finally
added code to detect the presence of the Ethernet chips. There's
a risk of a chip being locked up in a way that makes the detection
fail - and therefore the RESET not being performed. This catch-22
needs to be solved by the user doing a hard RESET.
2014-06-12 22:56:35 +02:00
Adam Dunkels 9ceb059c21 Merge pull request #611 from nfi/cc2x20-sfd-config
Corrected CC2x20 sfd config and startup message.
2014-06-11 23:17:05 +02:00
Adam Dunkels def57199b9 Merge pull request #511 from ADVANSEE/leds
leds: Fixes and enhancements
2014-06-11 22:37:34 +02:00
George Oikonomou 3552376324 Merge pull request #702 from g-oikonomou/ieee-addr-fixes
Fix incorrect IEEE address byte re-ordering
2014-06-11 09:54:52 +01:00
Oliver Schmidt a0961fc3c4 Build static Ethernet drivers directly from source. 2014-06-09 23:35:19 +02:00
Oliver Schmidt f124425ee1 Build static Ethernet drivers directly from source. 2014-06-09 23:14:11 +02:00
George Oikonomou 9d7c3b9866 Improve documentation for the CC2538 IEEE address re-ordering 2014-06-06 18:33:28 +01:00
George Oikonomou 5acc20fc47 Improve code style 2014-06-06 18:32:58 +01:00
George Oikonomou 623d6084e7 Make the CC2538 secondary IEEE address location configurable 2014-06-06 18:15:07 +01:00
LudovicW 66edb5b263 Fix incorrect IEEE address byte re-ordering 2014-06-06 17:22:33 +01:00
George Oikonomou 2e166a83c7 Merge pull request #691 from hexluthor/rts-cts
CC2538: Add hardware flow control (RTS/CTS) support on UART1.
2014-06-04 09:22:58 +01:00
George Oikonomou ba9c2d40eb Merge pull request #682 from g-oikonomou/watchdog-cc2538
Confine CC2538 WDT on/off conf inside the driver
2014-06-03 22:05:08 +01:00
Adam Dunkels 64f65b4e45 Merge pull request #617 from nfi/extended-radio-api
Extended radio API with support for setting channel, pan id, addressing modes, etc
2014-06-03 21:32:53 +02:00
Ian Martin 274b3dcd0b CC2538: Add hardware flow control (RTS/CTS) support on UART1. 2014-06-03 12:38:24 -04:00
Rémy Léone 25c8b0835d Closing doxygen groups 2014-05-30 11:01:20 +02:00
George Oikonomou 807ee624e4 Confine CC2538 WDT on/off conf inside the driver
Instead of requiring all calls to `watchdog_start` to be
wrapped inside `#if WATCHDOG_CONF_ENABLE` guards, we control
things from within the WDT driver itself.

This commit also includes some minor documentation and
indentation cleanups
2014-05-18 14:12:16 +02:00
George Oikonomou b864ec2b71 Merge pull request #661 from hexluthor/watchdog-enable
CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer
2014-05-18 14:11:49 +02:00
George Oikonomou 026864d129 Merge pull request #665 from hexluthor/cc2538-flash-conf
CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters.
2014-05-18 13:12:49 +02:00
Nicolas Tsiftes 73086e34f7 Merge pull request #632 from nfi/verbosity-control-stm32w
Add support for verbosity control for building STM32W-based platforms
2014-05-07 16:12:12 +02:00
Ian Martin 2abaeaa8cc CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters. 2014-05-02 11:35:58 -04:00
Ian Martin 7081440eff CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer. 2014-05-02 10:28:30 -04:00
Oliver Schmidt 5829bc5159 Adjustment to cc65 change. 2014-05-01 21:32:32 +02:00
George Oikonomou 08c884afa0 Improve the CC2538 extended RF API implementation
* Decouple 64-bit address from LINKADDR_SIZE
* get and set object from/to the start/end of the src/dest buffer
* We expect size == 8 (rather than size < 8) for both get_ and set_object. Error otherwise
* The RF no longer sets parameters by itself. We let the platform do this, using the extended API.
2014-04-23 12:20:16 +01:00
George Oikonomou 6028c0765f Don't hardcode min and max TX power values 2014-04-23 12:16:50 +01:00
George Oikonomou 3183805ba4 Implement extended RF API for the CC2530 RF 2014-04-23 12:16:50 +01:00
George Oikonomou b0f1199202 Merge pull request #636 from g-oikonomou/fix-random-init-lockup
Fix CC2538 random_init lockup
2014-04-18 13:28:40 +01:00
George Oikonomou 49bf7cc241 Merge pull request #616 from hexluthor/listing
CC2538: Add a Makefile rule to generate a final assembly listing.
2014-04-17 22:13:52 +01:00
Benoît Thébaudeau d93d129da6 cc2538: uart: Make it possible to use several UARTs simultaneously
This avoids the limitation of having a single UART available at runtime, without
duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2014-04-17 18:53:44 +02:00
Brad Campbell af27d2d252 [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS
Because the CC2538 has a multi-byte SPI RX FIFO, flushing the buffer
requires more than just a single read. This adds a loop that empties the
entire RX buffer on a FLUSH().

Different SPI chips needs different SPI settings. This commit adds a
function that allows chip drivers to configure the SPI peripheral before
using it.

The frame pin the driver was using as a chip select does not work as
most devices expect it to. It toggles after every byte, and most chips
interpret that as end of message. To make drivers more reliable, each
chip driver should setup a GPIO and assert it as needed.
2014-04-15 14:07:10 -04:00
Nicolas Tsiftes 19cd33664d Merge pull request #633 from nfi/verbosity-control-msp430
Add support for verbosity control for building MSP430-based platforms with the IAR compiler.
2014-04-14 16:38:07 +02:00