deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
6024 commits 6 branches 13 tags 80 MiB
Commit graph

1438 commits

Author SHA1 Message Date
fros4943
b730fb329d changed upload rules due to problems on linux platforms 2009-04-02 11:15:30 +00:00
fros4943
3b3580e439 disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki 2009-04-01 18:11:48 +00:00
fros4943
aa736322e1 removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead 2009-04-01 17:17:55 +00:00
fros4943
3665422d8d simplified cooja communication stacks initialization + added uipv6 stack 2009-04-01 13:50:12 +00:00
fros4943
6a99a82516 copied uipv6 configuration from native platform 2009-04-01 13:46:56 +00:00
fros4943
1c031504e5 no need to initialize serial line 2009-04-01 13:46:16 +00:00
fros4943
892bfb5678 moved radio-uip link functionality directly to comm stack sources 2009-04-01 13:45:41 +00:00
fros4943
eddd8350c5 renamed radio driver 2009-04-01 13:44:34 +00:00
fros4943
afed9bb2d0 icnlude packet radio by default 2009-04-01 13:39:54 +00:00
nifi
c6b15c289e * show radio channel at startup 
* only initialize timesynch when timesynch is enabled
 2009-03-31 13:25:50 +00:00
nvt-se
e90149b7b4 avoid switching mode when tx or rx is active. 
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
 2009-03-30 14:07:34 +00:00
fros4943
5f1fda0406 removed unused variables + writing serial data in timeevent 2009-03-26 16:23:47 +00:00
fros4943
dda6de8438 + clock stub functions 2009-03-26 16:22:36 +00:00
fros4943
ac22ad5081 changed the Makefile rules for uploading to sky-nodes. 
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
 2009-03-26 13:29:44 +00:00
nvt-se
04bd414e1c enabled LPP by default. 2009-03-26 12:51:55 +00:00
nvt-se
90b9b9bae3 configure LPP parameters with slightly longer listen time since the CC1020 
driver switches from TX mode to RX mode rather slowly.

decreased CCA check timeout.
 2009-03-26 12:47:12 +00:00
nvt-se
25cc327acc avoid hanging in TX mode after CCA check failed. 
minor memory savings.
 2009-03-25 15:25:05 +00:00
nvt-se
96fbf3b853 use old style C comments. 
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
 2009-03-24 15:32:26 +00:00
nvt-se
15c447e57e remove some unnecessary instructions and function calls. patch from Jesper Karlsson. 2009-03-24 15:13:11 +00:00
nvt-se
143c7f9cea switched from serial to serial_line. patch from Jesper Karlsson. 2009-03-24 15:02:03 +00:00
fros4943
c76f34ff98 minor serial test application update 2009-03-21 15:47:40 +00:00
fros4943
9c9165dc90 start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations 2009-03-20 13:23:44 +00:00
nvt-se
6b22fa60e8 - avoid costly rx state initialization if the radio is already on. 
- code formatting.
 2009-03-19 14:43:31 +00:00
nvt-se
8f85355f02 print the MAC protocol name when starting the node 2009-03-19 14:14:06 +00:00
nvt-se
b9ef907690 enable serial line tools using the same commands as the sky platform's Makefile 2009-03-17 22:27:14 +00:00
nvt-se
7e329ab467 removed obsolete file. 2009-03-17 22:20:04 +00:00
adamdunkels
b1cd9c207a Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include 2009-03-17 21:51:13 +00:00
adamdunkels
727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels
b20f0884ed Renamed serial module to serial-line 2009-03-17 20:19:11 +00:00
adamdunkels
0076bfe8a5 Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy 2009-03-17 15:56:32 +00:00
nvt-se
7f3def31b7 removed duplicate inclusion of header, and sorted the entries. 2009-03-17 15:02:19 +00:00
nvt-se
6d0fc26ec1 disabled unstable SD driver. 2009-03-17 15:01:40 +00:00
fros4943
d6ebba536c minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4 2009-03-13 14:40:07 +00:00
adamdunkels
65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
dak664
932fc9f748 Remove tab that was preventing cgi invokation 2009-03-12 21:37:22 +00:00
adamdunkels
5920a86312 Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps 2009-03-12 19:15:23 +00:00
fros4943
99b9e80de9 make all quickstart target phony 2009-03-12 17:48:23 +00:00
fros4943
72fdf5b379 make quickstart goal precious 2009-03-12 15:12:50 +00:00
fros4943
063bf88f90 cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work 
+
cygwin path fix for quickstart
 2009-03-12 13:04:10 +00:00
nvt-se
80bbc92ffe patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known 
in the header.
 2009-03-12 12:23:22 +00:00
fros4943
5d27841807 + contiki app object 2009-03-11 08:40:37 +00:00
fros4943
bcb34297df reimplemented quickstart functionality 2009-03-11 07:45:54 +00:00
fros4943
0bc10750bc added rule for .cooja target. 
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
 2009-03-10 21:23:38 +00:00
julienabeille
0395ff5f39 sicslowpan Typo 2009-03-09 08:19:07 +00:00
c_oflynn
41c19115d2 fix compiling ravenusb platform 2009-03-06 15:21:45 +00:00
adamdunkels
3848bba210 Added support for serial data input 2009-03-06 00:13:56 +00:00
adamdunkels
8afff893f1 Removed old \mainpage documentation to avoid confusion with the main \mainpage 2009-03-02 22:04:14 +00:00
fros4943
3774395c82 cfs example updated 2009-03-02 09:44:07 +00:00
fros4943
286065b584 cfs updated 2009-03-02 09:34:47 +00:00
adamdunkels
e3043b1be2 Enable communication power accounting for xmac by default 2009-03-01 20:43:37 +00:00
adamdunkels
ac9ab9c582 #include lib/random.h 2009-03-01 20:42:10 +00:00
nvt-se
47d70f2ae3 Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option. 2009-03-01 12:00:00 +00:00
nvt-se
b47221672a switched cfs offset type to signed long to allow backward movements with cfs_seek. 2009-02-28 13:41:16 +00:00
fros4943
9c8c4898f7 updating cooja cfs stubs according to recent commits 2009-02-27 16:06:25 +00:00
nvt-se
9f8f773b43 use unsigned long as cfs offset type. 2009-02-27 14:53:15 +00:00
oliverschmidt
03e7eb2535 Fixed comment (just to make sure that committing still works after all these months). 2009-02-27 07:57:13 +00:00
nvt-se
9b548619ed removed redundant definitions. 2009-02-25 23:57:13 +00:00
adamdunkels
d761dfebd1 Bugfix: reduced the size of the uIP buffer to account for MAC header space 2009-02-25 10:23:03 +00:00
nvt-se
c148e2e7ea Do not include codeprop.h by default. 2009-02-23 14:44:26 +00:00
nifi
0db6403c5d removed unnecessary reference to codeprop.h 2009-02-21 11:23:54 +00:00
adamdunkels
7781bbea58 Enabled X-MAC announcements by default, disabled polite broadcast announcements by default 2009-02-14 22:52:24 +00:00
adamdunkels
585620c102 Reverted the recent change from random_rand() to rand(). It turned out that 
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
 2009-02-11 11:08:53 +00:00
fros4943
f1fc4c879f cfs_coffee_get_fd_set() was renamed 2009-02-09 10:09:13 +00:00
nvt-se
d0a546b049 A long refactoring session yielded the following. 
Technical changes:

* Factored out file specific information from the file descriptor
  structure into a new file structure.

  - Useful file metadata can be stored after the file is closed.
  - File descriptors become much smaller.
  - Significantly reduces the need to scan for the file end.

* Use correct types in all function signatures.
* Removed the directory cache.

Results:

* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
 2009-02-08 17:08:13 +00:00
adamdunkels
440899e4cb Seed rand() with the node ID + MAC address 2009-02-07 16:49:36 +00:00
adamdunkels
5cf0c25ca6 A few more minor fixes 2009-02-04 20:58:05 +00:00
adamdunkels
96882c402a Fixed conformance to Contiki code style :) 2009-02-04 20:55:41 +00:00
joxe
9689a579be added DCO/CPU speed re-synch each 30 seconds 2009-02-04 19:32:20 +00:00
fros4943
c16921f108 checkpointing library implemented for the sky platform (cfs interface is currently not optimized) 2009-02-04 17:51:49 +00:00
zhitao
5789bf5596 Modified comments for receiver filter bandwidth settings 2009-02-02 08:52:49 +00:00
joxe
e5f0d786a8 fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted 2009-01-31 12:45:03 +00:00
fros4943
603740b13b removed compiler warning by returning 0 at undefined value 2009-01-23 17:08:17 +00:00
fros4943
ebcaf8eec8 removed compilation warning due to unused is_gateway variable (outside uIP mode) 2009-01-19 13:44:04 +00:00
adamdunkels
e70b45c102 Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists 2009-01-15 22:12:46 +00:00
adamdunkels
29fe3d8741 Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board 2009-01-15 21:07:03 +00:00
adamdunkels
9f0006fde0 Driver for the acceleromenter sensors on the JCreate board 2009-01-15 21:06:02 +00:00
fros4943
5f3c1a0e12 elfloader executing loaded programs from ram (not rom) by default on msp430 platforms. 2009-01-15 09:04:04 +00:00
joxe
d2dc732435 changed list_pop to return removed element 2008-12-16 09:59:42 +00:00
c_oflynn
5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
zhitao
a50d5b701e direct the UART input stream to the default Contiki serial process 2008-12-09 15:56:39 +00:00
nvt-se
79d4d22ee7 replaced usage of 16-bit rimeaddr field. 2008-12-02 16:00:15 +00:00
fros4943
0ab57730f8 removed reference to the removed u16 rime address field 2008-12-01 13:20:51 +00:00
c_oflynn
9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com> 
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
 2008-11-29 15:55:02 +00:00
fros4943
6150d13254 support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson) 2008-11-28 16:41:26 +00:00
zhitao
6b33cf434f bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead 2008-11-25 16:05:22 +00:00
joxe
55280131fc added printout of MAC protocol name 2008-11-24 14:31:08 +00:00
fros4943
720357bc60 added log_message() implementation 2008-11-21 10:35:46 +00:00
c_oflynn
8bae6890a8 Changes by "David Kopf" <dak664@embarqmail.com> to: 
-Add hit counter to index.html
 -Adding link to favicon.png
 -Fix serving of binary (image) files in avr-makefsdata file

Changes by Colin O'Flynn:
 -Removed extra linebreak in tutorial-raven.txt
 -Fix to contiki-conf.h in avr-rcb platform
 2008-11-18 22:03:12 +00:00
oliverschmidt
7cf3165155 Replaced NETSIM macro with general (and now actually working) solution in Makefile.include. 2008-11-17 22:52:10 +00:00
oliverschmidt
7ac49a573b Reverted recent change as there's now a general (and actually working) solution in Makefile.include. 2008-11-17 22:40:10 +00:00
nvt-se
98a42524d3 minor formatting changes 2008-11-17 16:18:52 +00:00
zhitao
0be308b7ce changed RSSI samples count to maximum (=16) 2008-11-17 16:14:09 +00:00
c_oflynn
42dd7c37fc Changed timeout to 1 second on fragmentation 2008-11-16 16:07:13 +00:00
oliverschmidt
a844636218 Minor docu update. 2008-11-13 20:26:27 +00:00
c_oflynn
699c493866 forgot these files for RCB... 2008-11-13 15:07:52 +00:00
zhitao
29b0d010d5 added #define for platform check 2008-11-13 14:25:47 +00:00
nvt-se
90691eb6a2 crc calculation contributed by Carlo Alberto Buano + some refactoring. 2008-11-11 12:24:43 +00:00
oliverschmidt
d08a218a7a Minor formatting change. 2008-11-10 22:52:43 +00:00
oliverschmidt
24f04a57b2 Include wget shell command in "standard" shell environments. 2008-11-10 22:23:50 +00:00
oliverschmidt
c109e102c4 Include wget shell command in "standard" shell environments. 2008-11-10 22:10:32 +00:00
nvt-se
1a6c909736 added sd_write declaration. 2008-11-10 14:32:49 +00:00
adamdunkels
34e2734cd9 Use the uip-over-mesh network gateway functionality 2008-11-09 12:30:32 +00:00
adamdunkels
83155d48f9 Moved the network gateway logic to the uip-over-mesh module. 2008-11-09 12:22:04 +00:00
c_oflynn
b6e76a4947 Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface 2008-11-08 17:11:18 +00:00
c_oflynn
f13ec95efa *** empty log message *** 2008-11-08 03:29:15 +00:00
nvt-se
0c4f7bed8f temporary fix to get sicslowpan.c working on the Sky platform: 
conventional MAC implementations require a call to the MAC driver's
read function.
 2008-11-06 20:45:06 +00:00
nvt-se
21e4b4be80 map rime address to mac address for ipv6 2008-11-06 15:14:24 +00:00
nvt-se
c5d9795f92 added initialization for uip6 2008-11-05 15:34:04 +00:00
nvt-se
d1d09ea1fd added IPV6 configuration. 2008-11-05 14:31:06 +00:00
nvt-se
7ac98ee257 added missing watchdog_periodic 2008-11-04 15:46:59 +00:00
adamdunkels
1d56451d11 Changed the default IP address to match the default setting in tapdev 2008-10-31 18:11:44 +00:00
oliverschmidt
072830d4f2 Migrated project files from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). Almost all changes were required because VC++ 2008 does a parallel build. Therefore all intermediate files need to have unique names. This wasn't the case by default because VC++ doesn't presume seperate projects to build into the same directory - as it is the case with all the *.prg and *.dsc files of Contiki. 2008-10-29 15:03:34 +00:00
oliverschmidt
ebcafc68c8 Migrated solution file from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). 2008-10-29 14:59:35 +00:00
joxe
bc39f2a86c added get_rssi_packet for getting RSSI from the last packet received 2008-10-29 09:22:39 +00:00
fros4943
641c48ee00 not limiting random seed to 99 2008-10-28 15:37:34 +00:00
nvt-se
4829ffea50 removed supererogatory file 2008-10-28 14:07:32 +00:00
nvt-se
59012007b9 added an SD example application 2008-10-28 12:56:57 +00:00
nvt-se
1fdb3c21f0 fixed problems with uart and sd cards. 2008-10-28 12:42:53 +00:00
c_oflynn
f301f9d118 Changed copyright. 2008-10-15 15:59:38 +00:00
mvidales
2e2eb8d387 changed stabs to dwarf-2 for debugging. 2008-10-15 15:42:18 +00:00
c_oflynn
1375511179 Fix to allow building without LCD interface 2008-10-15 14:38:20 +00:00
mdurvy
acfe78a51a last version of the raven lcd user interface 2008-10-15 13:13:49 +00:00
adamdunkels
3428e17cea Changed the \mainpage doxygen tag to avoid confusion with the main Contiki \mainpage 2008-10-15 12:37:59 +00:00
adamdunkels
ba43d94ef7 Define IPv6 options only if UIP_CONF_IPV6 is defined (which should be defined by the Makefile.include if IPv6 is enabled) 2008-10-15 09:14:25 +00:00
c_oflynn
1c5a27f693 Moved raven-lcd.h file 2008-10-14 22:05:09 +00:00
c_oflynn
6e42bd3496 example\webserver-ipv6-raven works! 2008-10-14 21:29:23 +00:00
c_oflynn
d5865cb2b6 -Change needed for ravenusb to build 
-Reverts Makefile.include back to 1.57, then apply the needed change
 2008-10-14 20:31:46 +00:00
c_oflynn
a520fe4646 Lots of changes / commits! This allows ravenusbstick example to build at least. 2008-10-14 19:06:51 +00:00
julienabeille
2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille
08465a6c19 new-ipv6 compiles on native cygwin 2008-10-14 14:00:58 +00:00
julienabeille
4f9bc05f90 ping-ipv6 example compiles on native cygwin 2008-10-14 13:39:12 +00:00
julienabeille
9b2961046a Modifs to minimal-net for IPv6 support 2008-10-14 10:06:26 +00:00
adamdunkels
0a961b2ada Contiki port for the Atmel AVR Raven board 2008-10-14 09:40:30 +00:00
nvt-se
aff141f56e reduced default sizes 2008-10-09 14:56:53 +00:00
fros4943
115a2b0782 renaming printf/putchar/puts symbols to avoid jni library loading overriding our custom implementations 
experimental: directly references objcopy (tested on win32+linux)
 2008-10-05 15:43:09 +00:00
fros4943
d79b1d55f7 not implementing putc(..FILE*) function, only stdout 2008-10-05 15:40:27 +00:00
nvt-se
10639bc982 use abstract types for offsets and pages so that we can easily port it to 
very large or small memories.
 2008-10-03 19:27:28 +00:00
fros4943
4cc56a741d printf implementation towards cooja 2008-10-03 09:41:16 +00:00
fros4943
08502eb344 removed refences to printf2log.h 2008-10-03 09:39:38 +00:00
fros4943
2fb6410e4d removed old printf output conversion method, instead implementing putchar() and printf() 2008-10-03 09:37:32 +00:00
joxe
1a1ddd0bd5 removed energest-arch from sky and esb platforms 2008-09-29 12:38:18 +00:00
nvt-se
9c3f5beec7 added a small guide. 2008-09-26 18:14:12 +00:00
nvt-se
37fa4da899 support 9600 baud 2008-09-19 12:18:04 +00:00
joxe
5b1c229754 fixed battery sensor for sky platform 2008-09-18 21:29:06 +00:00
joxe
5d860b1df2 changed sleep to go into LPM3 2008-09-18 17:58:21 +00:00
joxe
8aa8e26c54 removed redundant sensor initialization, added comment 2008-09-14 20:47:30 +00:00
adamdunkels
0f82635dc9 Bugfix: avoid overflowing the event queue 2008-08-15 19:54:58 +00:00
adamdunkels
35d85897b9 Minor bugfix: the printf() must include the n 2008-08-15 19:34:07 +00:00
nvt-se
deefb97c16 Changed clock value so it is a power of two. 2008-08-14 11:11:34 +00:00
matsutsuka
6c9291f38b Removed dependency of Cygwin from hexameter. 2008-07-20 07:44:39 +00:00
oliverschmidt
f822ac9797 Added clock_seconds() implementation. 2008-07-12 14:44:37 +00:00
nvt-se
2b68f88e77 moved platform independent definitions 2008-07-11 21:39:26 +00:00
nvt-se
e757cae8ea removed obsolete definition 2008-07-11 21:36:45 +00:00
nvt-se
e8a85b3726 moved platform independent code to the right place 2008-07-11 21:35:10 +00:00
nifi
9952ee8f26 Ported Coffee to the ESB platform 2008-07-11 15:27:57 +00:00
adamdunkels
b18b84bb0e Added clock_seconds implementation to minimal-net port 2008-07-10 17:10:39 +00:00
adamdunkels
a8f2e8ca48 Added clock_seconds implementation to win32 port 2008-07-10 17:08:54 +00:00
adamdunkels
6bfe18bce1 Changed startup message 2008-07-09 20:58:25 +00:00
nifi
0d87322a18 minor documentation update and removed unused function prototypes 2008-07-09 20:45:06 +00:00
adamdunkels
710f9cf54b Removed debug printout 2008-07-09 09:37:50 +00:00
adamdunkels
2023a692d4 Added clock_second() implementation to make th shell work 2008-07-09 09:34:29 +00:00
nifi
f93f501a4d updated tr1001_send and tr1001_read to match radio driver api 2008-07-08 13:22:31 +00:00
nifi
8718c41945 Fixed compiler warning. 2008-07-08 12:35:05 +00:00
nifi
8db3671d65 - Replaced TR1001 statistics with rimestats 
- Fixed typo in constant name
- Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
 2008-07-08 12:27:22 +00:00
nifi
6e657ad3d8 Moved old Makefile from platform/esb to backyard/platform/esb 2008-07-08 11:21:51 +00:00
nifi
16f7888b52 changed clock resolution to 64 (needs to be a power of 2) and updated uIP settings 2008-07-08 09:36:48 +00:00
adamdunkels
8e5d255b5b Moved initialization of the SHT11 until after other initialization: this seems to fix a bug where the SHT11 temperature and humidity values started varying wildly. 2008-07-08 08:23:24 +00:00
adamdunkels
84e4bf7a15 Changed order of initialization to make light sensors work again: a previous change to irq.c seems to have conflicted with light sensor initialization 2008-07-07 23:44:58 +00:00
oliverschmidt
9ac4123f00 Adjusted VC++ project file to recent change regarding cfs implementation (and added preprocessor define _CRT_NONSTDC_NO_DEPRECATE). 2008-07-06 11:06:14 +00:00
oliverschmidt
9d5ae4864e Added preprocessor define _CRT_NONSTDC_NO_DEPRECATE to allow usage of open(), close(), read(), write() and lseek(). 2008-07-06 11:04:33 +00:00
oliverschmidt
c60e91bf59 Moved Win32 cfs directory functions from cfs-win32.c to cfs-win32-dir.c. 2008-07-06 10:24:38 +00:00
oliverschmidt
bf3c92e98c Leverage split of cfs-posix and cfs-posix-dir by reusing cfs-posix for win32 and replacing only cfs-posix-dir with cfs-win32-dir. 2008-07-06 08:29:37 +00:00
oliverschmidt
86bd7e9829 Added lseek dummy. 2008-07-06 07:34:34 +00:00
oliverschmidt
fa956117f7 Dummies should rather return errors. 2008-07-06 07:32:20 +00:00
oliverschmidt
c00de08dec Added lseek dummy. 2008-07-06 07:28:42 +00:00
nvt-se
133a314b1c energest.h moved to sys/ 2008-07-04 02:58:58 +00:00
adamdunkels
64b6663b11 moved energest from lib/ to sys/ 2008-07-03 23:59:20 +00:00
adamdunkels
c6579d4f08 CFS Coffee arch file for the native platform 2008-07-03 23:13:55 +00:00
adamdunkels
51f4ab8b2c Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long 2008-07-03 23:12:10 +00:00
adamdunkels
84a42a0bb3 xmem implementation for the native platform 2008-07-03 23:11:27 +00:00
matsutsuka
28bcff539f path misconfiguration has been fixed 2008-07-02 15:04:07 +00:00
matsutsuka
4cf1687845 shell is removed temporarily since it doesn't work in the current version. 2008-07-02 15:03:44 +00:00
adamdunkels
28331191b3 Changed name of simple-cc2420 to cc2420 2008-07-02 09:38:06 +00:00
adamdunkels
66876625d4 Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*. 2008-07-02 09:05:40 +00:00
adamdunkels
dafa1d89a2 Added cc2420-aes.c (functions for interfacing the build-in AES support of the CC2420) 2008-07-02 08:47:05 +00:00
matsutsuka
4ecebdd842 A binary conversion tool has been modified to support variations. 2008-07-02 07:17:14 +00:00
adamdunkels
1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
oliverschmidt
c2bec97eef Added some info on the Apple2 PFS (and AppleCommander). 2008-06-12 22:45:17 +00:00
oliverschmidt
433518c3cb Just some minor reformatting. 2008-06-12 22:16:50 +00:00
nvt-se
f83000af8a clear bit when uart edge is set. 2008-05-29 22:06:18 +00:00
nvt-se
36fec8dd01 moved sdspi.c to the sd file list. 2008-05-29 22:04:30 +00:00
adamdunkels
d134a1fcb1 Moved sky-specific make targets from the tools/sky/Makefile to the more natural platform/sky/Makefile.sky. Added a number of convenient targets for accessing the serial port. 2008-05-29 20:15:49 +00:00
nvt-se
44c93fcd93 cleared lock semantics 2008-05-28 13:17:08 +00:00
adamdunkels
7ca33e2285 Reverted inadvertedly committed change to lpp instead of nullmac 2008-05-27 19:07:20 +00:00
nvt-se
fed62e1642 added timeout 2008-05-27 14:22:55 +00:00
nvt-se
07f8875963 added missing header 2008-05-27 14:05:09 +00:00
nvt-se
f2c6f77f7d removed debug print 2008-05-27 14:04:15 +00:00
adamdunkels
1263eb8455 Moved old unused files to backyard 2008-05-27 13:16:34 +00:00
nvt-se
ce84dce702 reset locks on forced mode switch 2008-05-27 13:05:52 +00:00
nvt-se
9c9c2573c3 lock UART for RS232 in putchar 2008-05-27 13:03:19 +00:00
nvt-se
bff587e32c lock SPI bus when erasing 2008-05-27 13:01:27 +00:00
nvt-se
a26bcf30f7 added SPI parameters. 2008-05-27 12:25:48 +00:00
oliverschmidt
2ede893aa6 The feature set of gnumake is really frightening: This time I discovered 'target-specific variable values'... 2008-05-26 11:26:57 +00:00
oliverschmidt
f74503c23c Replace non-fully-functional hack with the new gnumake variable CONTIKI_PROJECT. 2008-05-26 10:13:32 +00:00
oliverschmidt
356f5cfa04 The recent optimizations (usage of language card bank2 through new C-library, logging through ROM routine, removal of unused IP forwarding code) allowed to increase the number of concurrent HTTP conntections from 3 to 7 :-) 2008-05-23 23:13:41 +00:00
oliverschmidt
a78a7dedbc Added make target 'disk' for creating a .dsk disk image using AppleCommander. 2008-05-22 22:21:43 +00:00
oliverschmidt
7120cf4404 Added make target 'disk' for creating a .d71 disk image using c1541. 2008-05-22 22:19:30 +00:00
oliverschmidt
dc63b33956 Added make target 'disk' for creating a .d64 disk image using c1541. 2008-05-22 22:18:25 +00:00
oliverschmidt
cd1608aa08 Activate uIP forwarding support. 2008-05-22 19:49:48 +00:00
oliverschmidt
e914302e94 Removed check already done in Makefile.include. 2008-05-22 19:45:47 +00:00
oliverschmidt
b750e8cc42 Moved platform/c64/contiki.cfg to tools/c64/sample.cfg 2008-05-21 08:13:04 +00:00
oliverschmidt
5dba39fab1 Moved platform/c128/contiki.cfg to tools/c128/sample.cfg 2008-05-21 08:09:46 +00:00
oliverschmidt
a341f981aa Moved platform/apple2enh/contiki.cfg to tools/apple2enh/sample.cfg 2008-05-21 07:59:43 +00:00
adamdunkels
8b4179cf45 Moved ctimer_init() so that MAC protocols can use ctimers in their initialization code 2008-05-19 12:07:49 +00:00
adamdunkels
7aa8508e0b Added display of radio status: a green ring appears around nodes with their radio turned on. Added a command that prints out a .fig file that shows the current network setup (press the 'd' key). 2008-05-14 19:22:57 +00:00
adamdunkels
31ea41d8db Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level 2008-05-14 19:19:28 +00:00
nvt-se
776f377a69 Configuration for the Sky platform. 2008-04-28 10:34:33 +00:00
joxe
7be3aeeeb5 added sampling mode in sound sensor 2008-04-25 15:55:37 +00:00
fros4943
c4df31376e cooja hello world (+ include printf2log.h) 2008-04-22 13:07:49 +00:00
nvt-se
73978e3133 only include sdspi.h if WITH_SDC is on. 2008-03-31 14:33:23 +00:00
nvt-se
acf01a0c58 fixed compilation error. 2008-03-31 14:32:00 +00:00
nifi
f916c7b130 initialize ctimer after initialization of process 2008-03-31 14:01:26 +00:00
nvt-se
067e4c3c06 include contiki-conf.h for type definitions. 2008-03-31 13:48:03 +00:00
nvt-se
f7b3d9fc99 moved files to sd/ 2008-03-31 13:45:52 +00:00
nvt-se
fdcc145150 added missing file. 2008-03-31 13:43:34 +00:00
nvt-se
2822ff7ddb made more conform with contiki indentation. 2008-03-28 23:03:05 +00:00
nvt-se
10cabda581 lock wait function from Michael Baar. 2008-03-28 16:06:28 +00:00
nvt-se
bd8809d35d print information about the SD card, if existent. 2008-03-28 16:02:01 +00:00
nvt-se
6486460e3f locking bugfix from Michael Baar. 2008-03-28 15:59:58 +00:00
nvt-se
3fec8ee5e7 synced with newer version by Michael Baar. 2008-03-28 15:58:43 +00:00
nvt-se
d5c8b18fc2 added accelerometer test with moving average. 2008-03-27 13:08:35 +00:00
nvt-se
5631c92416 use three different input channels for the accelerometer. 2008-03-27 13:04:59 +00:00
oliverschmidt
85edbc01db Starting with the cc65-snapshot-2.11.9.20080316 the Apple2 C-library supports placing code in the Apple2 Language Card by choosing the code segment 'HIGHCODE'. By default the memory area 0xD400 - 0xE000 is used for HIGHCODE. If the application doesn't need the ProDOS 8 QUIT code then the memory area used for HIGHCODE may be extended to 0xD000 - 0xE000. 
Contiki now leverages that feature to place process.o, etimer.o and uip_arp.o in HIGHCODE. These files were carefully chosen as:
- they are necessary for all Ethernet apps
- their size doesn't depend on configuration macros
- they fill the available space nicely (with a little reserve for changes in the source or the compiler)
 2008-03-24 22:49:00 +00:00
fros4943
b5d09f3822 set default radio channel: 26 
same as sky platform
 2008-03-18 16:22:00 +00:00
fros4943
660bc5e991 changed ss values + added configurable csma mac 2008-03-17 09:48:00 +00:00
nifi
ddcda4582e ctimer initialized by contiki-esb-main 2008-03-13 15:59:43 +00:00
nifi
3ecd955f01 energest needs to be initialized before network 2008-03-13 15:58:44 +00:00
nifi
79cb912f7c reduced memory usage, removed procinit, general cleanup of initialization, enabled watchdog 2008-03-07 17:54:22 +00:00
oliverschmidt
9071007e1e For the Win32 platform build we need to define AUTOSTART_ENABLE even for the Contiki library files to be able to autostart the program handler. 
Note: For this to work the program handler needs to be the first autostart enabled application in the Contiki library. As the GNU archiver guarantees to preserve the order of the object files in a library this can be accomplished by having the program handler the first item in APPS.
 2008-03-04 22:55:54 +00:00
adamdunkels
c38d43c387 Change order of initialization so that Rime is initialized before uIP-over-Rime. Send out a new gateway command if a spurious (erroneous) gateway command is received. (Note for the future: this will cause a ping-pong problem with two correct gateways in the network; need to come up with a better solution for this.) 2008-03-03 20:23:53 +00:00
adamdunkels
136443a387 Print out interface address 2008-03-03 20:21:59 +00:00
oliverschmidt
8a4890c9e5 Free up unused file descriptors. 2008-02-28 21:56:47 +00:00
oliverschmidt
368d389970 Free up unused file descriptors. 2008-02-28 21:36:37 +00:00
nvt-se
1d3bae48dd added sd card support. 2008-02-28 15:49:01 +00:00
nvt-se
2cc0135e35 cleaned up and fixed an error checking problem in the locking code. 2008-02-28 15:11:22 +00:00
fros4943
3b5fa2d8e5 added 5 second delay before actually burning the node id (may otherwise cause problems with the .upload script) 2008-02-25 16:34:56 +00:00
adamdunkels
412facb831 This is an initial commit of an implementation of the Chameleon 
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.

The details are in our SenSys 2007 paper:

Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.

http://www.sics.se/~adam/dunkels07adaptive.pdf

This is a rewrite of the code that was developed for the paper.
 2008-02-25 02:14:34 +00:00
adamdunkels
9c57e5e272 Moved old Makefile (non-working) from platform/sky to backyard/platform/sky 2008-02-24 22:22:17 +00:00
adamdunkels
307fc41646 Detect if node is attached to a SLIP line to set node to become the network's gateway 2008-02-24 21:13:03 +00:00
adamdunkels
5bcd0ab60b Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol 2008-02-24 21:11:35 +00:00
oliverschmidt
d74fd06536 Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file and setting the mouse sprite in order to preserve the existing logic. 2008-02-17 14:12:52 +00:00
oliverschmidt
93789de9dd Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file in order to preserve the existing logic. 2008-02-17 14:11:48 +00:00
oliverschmidt
df441f50a3 Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE. 2008-02-15 16:51:06 +00:00
nvt-se
a06b85f74b adjusted uIP parameters. 2008-02-13 15:41:04 +00:00
fros4943
27ac84d009 simlog function declaration 2008-02-11 18:45:18 +00:00
fros4943
4c56fce697 updated cfs_write arguments 2008-02-11 18:40:16 +00:00
adamdunkels
6740d95bfa Initialize serial line with 115200 bps for SLIP 2008-02-11 10:44:12 +00:00
adamdunkels
fbcf9b6fcf Disable watchdog while burning node ID 2008-02-11 10:43:47 +00:00
adamdunkels
8058a49d21 Code style fix 2008-02-11 10:43:31 +00:00
oliverschmidt
b252bb9fc9 Removed finally unnecessary cast (and reverted unintentionally commited change). 2008-02-10 22:52:41 +00:00
oliverschmidt
2632f8f937 Removed finally unnecessary cast. 2008-02-10 22:36:36 +00:00
oliverschmidt
0e96534ca8 Now that process initialization has been changed (back) to synchronous it needs to be called after adding program handler menu items in order to preserve the the existing program handler logic. 2008-02-10 19:14:48 +00:00
oliverschmidt
8823dfe250 Adjusted to the new shell. 2008-02-10 12:13:06 +00:00
oliverschmidt
2b1abd87af Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE (and use it now in the platform build to start the program handler). 2008-02-10 11:29:24 +00:00
oliverschmidt
034bc4ec66 Adjusted to the new shell. 2008-02-09 18:56:26 +00:00
oliverschmidt
614fa668cd Removed SELFSTART_PROCESS as AUTOSTART_ENABLE generally serves that purpose - and AUTOSTART_ENABLE gets already set as required :-) 2008-02-08 22:48:28 +00:00
oliverschmidt
0655839603 Removed superfluous semicolon. 2008-02-08 12:14:52 +00:00
oliverschmidt
fe6a55d1a4 Accomodate for the now more complex shell output. 2008-02-07 23:06:03 +00:00
oliverschmidt
806f79bb03 Replaced (now obsolete) PROCESS_LOADABLE with SELFSTART_PROCESS. 2008-02-07 16:34:18 +00:00
oliverschmidt
155a27ff59 Switched from (now obsolete) 'process_load' to 'autostart_processes'. 2008-02-07 15:53:43 +00:00
oliverschmidt
a105e1a40c Added 'const'. 2008-02-06 16:41:19 +00:00
adamdunkels
cb6bc45350 Added code for routing IP packets over low-power radios using the Rime mesh module 2008-02-03 21:03:19 +00:00
adamdunkels
dc43a9713d Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader 2008-02-03 21:01:36 +00:00
adamdunkels
f5b08ff115 Added a crude hack for drawing lines between nodes 2008-02-03 20:49:50 +00:00
adamdunkels
28a3a51f82 Added uIP ICMP destimation unreachable message generation 2008-01-24 23:09:40 +00:00
adamdunkels
68523814c5 Moved from examples/sky into generic platform/sky/apps so that all examples can use it 2008-01-23 20:34:37 +00:00
adamdunkels
c2ef303c24 Updated for the new simple_cc2420 API 2008-01-23 14:58:01 +00:00
nvt-se
6005437b27 Disable the watchdog during the whole erase operation. 2008-01-21 10:40:26 +00:00
nvt-se
bed0963769 Call watchdog_periodic before erasing each sector, because this operation 
takes approximately 1s.
 2008-01-21 10:28:44 +00:00
adamdunkels
685de41feb Fixed buggy build 2008-01-19 06:57:44 +00:00
nifi
3e0e3d4965 added energest-arch.c 2008-01-18 18:26:02 +00:00
adamdunkels
34bd11905c Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer 2008-01-14 14:50:01 +00:00
adamdunkels
02ee418313 Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel 2008-01-14 14:22:16 +00:00
adamdunkels
7a356d0fb5 Added support for (simulated) serial data input. Data written to netsim's standard input are now sent as serial data to the main node. 2008-01-14 09:38:16 +00:00
fros4943
4c131d6975 added max printf2log message size 2008-01-11 15:37:38 +00:00
adamdunkels
0cb1efe718 Added cfs-posix 2008-01-08 14:27:28 +00:00
adamdunkels
f935be10c9 Added initalization of the serial library. Changed LPM3 to LPM2 since the current serial driver does not work with LPM3 yet (we need to add start edge detection interrupt support to fix that). 2008-01-08 08:21:03 +00:00
adamdunkels
690805ebe7 Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL 2008-01-08 08:19:56 +00:00
adamdunkels
959c4f3ee2 Removed ENERGEST_CONF_ON which is present in contiki-conf.h anyway 2008-01-08 08:18:00 +00:00
adamdunkels
bd9230b4b3 Added serial input from stdin, removed uIP initialization since uIP is not used anyway, made stdout unbuffered 2008-01-08 08:08:57 +00:00
adamdunkels
b7ab95499f Added serial and cfs-posix-dir 2008-01-08 08:08:05 +00:00
oliverschmidt
26a554e7c2 Added C128 port. It runs the example webserver both in the cgi and cfs variant - although the latter only with a reduced MTU size due to memory constraints. 2008-01-05 22:30:23 +00:00
oliverschmidt
a9a1a00f27 Moved GTK port to the backyard as it doesn't work for quite some time by now. 2008-01-05 21:06:38 +00:00
oliverschmidt
00d75c8d16 Made use of uip_ipaddr_to_quad(). 2008-01-04 23:28:33 +00:00
oliverschmidt
74fc3b4576 Made netsim gateway ip addr on Windows/Cygwin configurable at the command line. 2008-01-04 23:23:29 +00:00
oliverschmidt
5bff4631e4 Minor reformatting. 2008-01-04 23:09:03 +00:00
oliverschmidt
f75d01a428 Log ip addr in the ordinary way. 2008-01-04 22:21:04 +00:00
oliverschmidt
b96c9deebc Added "usual" comments. 2008-01-04 21:53:32 +00:00
oliverschmidt
bb19396d21 Introduced yet another high-level config macro. 2008-01-01 19:47:03 +00:00
oliverschmidt
852d2c0283 Introduced very lightweight pfs implementation based on Apple ProDOS. 
ProDOS requires for each opened file a user-supplied page-aligned 1024 byte i/o buffer. This makes the generic POSIX file i/o library contained in the cc65 C-library quite heavyweight.

In contrast the lightweight pfs implementation uses the uIP packet buffer as ProDOS i/o buffer. Therefore:
- Only one file may be open at any time.
- That file may not be open while the uIP packet buffer is used by uIP. The open()/read()/close() sequence should be completed before Contiki event scheduling or inside handling a single Contiki event.
- The uIP packet buffer must be large enough to hold the ProDOS I/O buffer. Depending on the position of the uIP buffer in memory this means between 1024 and 1024 + 256 bytes. Therefore in an Ethernet environment setting the MTU_SIZE to at least 1266 is safe (So the default of 1500 is just fine).
 2008-01-01 18:49:50 +00:00
oliverschmidt
69faf1ff4d Set sprite color. 2007-12-24 15:01:49 +00:00
oliverschmidt
5592b1df6c Implement cfs API on preprocessor level using POSIX functions.. 2007-12-23 15:29:19 +00:00
oliverschmidt
fda38428d9 Introduced some more high-level config macros. 2007-12-23 13:55:38 +00:00
oliverschmidt
14a8cf7200 Made use of the new high-level config macros. 2007-12-23 12:33:57 +00:00
oliverschmidt
125f261b7d Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios. 2007-12-23 12:32:43 +00:00
oliverschmidt
0564cc50fd Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all. 2007-12-21 01:36:01 +00:00
oliverschmidt
fe023c6d3e Introduced very lightweight log implementation not depending on any file I/O library. 2007-12-21 00:43:57 +00:00
oliverschmidt
c36697fca9 Added target-specifc mouse configuration values. 2007-12-20 22:59:41 +00:00
oliverschmidt
e63610e1c9 Added target-specifc mouse support (sprite handling). 2007-12-20 22:54:22 +00:00
oliverschmidt
ff6622310f Added target-specifc mouse configuration values. 2007-12-20 22:52:18 +00:00
oliverschmidt
eab988e84d Added target-specifc ctk (and www) configuration values. 2007-12-20 20:54:15 +00:00
nvt-se
f0891be218 added clear channel assessment timeout. long to begin with. 2007-12-20 14:44:31 +00:00
fros4943
d8f6f03edc moving radio init to init-net files 2007-12-20 13:43:24 +00:00
fros4943
d0997c2dab major bugfix: padding synch with zero 2007-12-20 13:36:59 +00:00
nvt-se
abb2731ed7 corrected comparison when bits don't need shifting. 2007-12-20 10:48:01 +00:00
nvt-se
7a6a9e62e4 improved logic. 2007-12-19 13:25:41 +00:00
nvt-se
1f00c20815 state variable must be volatile. 2007-12-19 13:09:01 +00:00
oliverschmidt
70fe24817e Added target-specifc ctk (and www) configuration values. 2007-12-18 17:51:20 +00:00
nvt-se
b4a8641dda removed printf's. 2007-12-18 15:27:43 +00:00
nvt-se
f9d24f0d24 Wake up from sleep in the interrupt when the receiver process is going 
to be polled.
 2007-12-18 15:26:25 +00:00
fros4943
d21572da02 configurable port 2007-12-18 11:55:01 +00:00
nvt-se
ab115e4b10 Removed deprecated function. 2007-12-17 20:18:29 +00:00
nvt-se
1566f55e04 use smaller payload buffer size and provision for synchronization word in 
the total buffer.
 2007-12-17 20:15:53 +00:00
nvt-se
bcefffb0e7 set ev to valid value. 2007-12-17 18:48:50 +00:00
nvt-se
692da8fd47 swapped the currents for lpm and cpu. 2007-12-17 18:47:17 +00:00
nvt-se
004143b6b8 set rxlen to zero before enabling interrupts. 2007-12-17 16:37:15 +00:00
nvt-se
2288cdecbb small cleanup. 2007-12-17 16:23:32 +00:00
nvt-se
2d5f331b34 new line. 2007-12-17 16:20:34 +00:00
fros4943
479d74ce6a added receiver process outside interrupt 2007-12-17 15:53:57 +00:00
fros4943
7886d51045 removed old dma_init 2007-12-17 15:47:55 +00:00
fros4943
3936e0c275 updated version 2007-12-17 15:47:40 +00:00
nvt-se
5f1ca4ccdf use synchronous transmission. 2007-12-17 15:26:47 +00:00
nvt-se
2a0351afb4 improved uip support and cleaned up the source. 2007-12-17 13:33:09 +00:00
nvt-se
86ce511469 Separate files for network initialization. 2007-12-17 13:20:54 +00:00
nifi
babb455dae More explicit assignment of Rime address from node ID 2007-12-17 13:04:10 +00:00
adamdunkels
381f5dc4cc Initialize Rime address from hardware MAC address if no node ID has been configured. Be more explicit on how Rime address is assigned from node ID. Set time synch authority level from Rime address rather than node ID. Fix bug that put CPU in LPM2 instead of LPM3. 2007-12-17 12:35:23 +00:00
nifi
f4ddc371e8 changed the way that rime address is set 2007-12-17 12:17:23 +00:00
fros4943
4da695ce72 bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise 2007-12-17 11:23:57 +00:00
nvt-se
6a42706847 removed duplicate. 2007-12-17 11:15:21 +00:00
nvt-se
a305e3ccbb removed lpm_on. 2007-12-17 11:14:28 +00:00
fros4943
3969ea6f9d not using usb port to program the msb 2007-12-17 11:10:45 +00:00
oliverschmidt
e991edc24d Added route handling to the Cygwin build. It is done similiar to the other builds by simply shelling out to 'route'. However the coding isn't placed in the driver but in the netsim node main method - and it is fully parametrized. 
Cygwin doesn't seem to call exit functions on SIGTERM so I needed to go for a signal handler in order to delete the route.
 2007-12-17 01:12:09 +00:00
adamdunkels
2b4f33a4dd Enabled support for CC2420 timestamps 2007-12-16 15:05:04 +00:00
adamdunkels
d13648292e Added initialization of the time synchronization module 2007-12-16 15:03:35 +00:00
oliverschmidt
8644822a34 Soe we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 13:08:09 +00:00
oliverschmidt
c7a24bf6cf Soe we're finally bak at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 13:07:35 +00:00
oliverschmidt
805f3f87d3 Make the "empty" error_exit implementation the default to be optionally overridden. 2007-12-16 13:05:23 +00:00
oliverschmidt
7b3d0559b3 Minimal reformatting. 2007-12-15 23:02:16 +00:00
oliverschmidt
21e343dc2f Don't depend on program handler for project builds. 2007-12-15 21:54:54 +00:00
oliverschmidt
0e8649e5ae Don't override www defaults for project builds. 2007-12-15 21:39:06 +00:00
oliverschmidt
97b1c95005 Activate mouse support for fullscreen mode. 2007-12-15 21:30:56 +00:00
oliverschmidt
9765b76455 Fixed typos. 2007-12-15 20:12:28 +00:00
oliverschmidt
6fd3b0dbae Removed CTK_CONF_HYPERLINK from shared code as its use is still unclear (and the implementation was incomplete anyway). 2007-12-15 11:34:59 +00:00
oliverschmidt
b32f0643ab Moved stuff into sys subdir to clean up the apple2enh dir (and because the corresponding shared res. cpu stuff is in the sys dir as well). 2007-12-15 11:04:11 +00:00
oliverschmidt
b89a08be8b Allow Cygwin based Win32 platform to be used for 'project builds' (in the sense of the Contiki 2.x build system) beside the exsisting 'platform build'. 2007-12-15 00:00:34 +00:00
oliverschmidt
3a3a98fc0f Made pc-6001 behave as before. 2007-12-14 23:49:14 +00:00
oliverschmidt
4519240466 Made ethernut2 behave as before. 2007-12-14 23:45:56 +00:00
oliverschmidt
7ad283bfe1 Made ethernut1 behave as before. 2007-12-14 23:44:49 +00:00
oliverschmidt
e4e608bd1d Made gtk behave as before. 2007-12-14 23:40:41 +00:00
fros4943
c028df7ecf not using mempcy for ack crc 2007-12-13 16:57:31 +00:00
fros4943
afb1cb28d3 initializing rimeaddr from nodeid similar to sky platform (!= esb platform) 2007-12-13 16:11:22 +00:00
nvt-se
54bef4bea3 added back initializations that were missing in the previous commit. 2007-12-13 13:10:02 +00:00
nvt-se
665c58fd2a Contributions from Michael Baar: 
CC1020

o   Turns off only after transmission has ended and not in between

o   Using events for DMA takes too long. It should use a callback when
    DMA finishes to turn off the transmit mode as early as possible.

Core/UART

o   Added profiling and energest initialization

o   Changed low-power mode from LPM1 to LPM3
 2007-12-13 12:51:38 +00:00
nvt-se
b1d87bf0d3 Removed deprecated rules. 2007-12-13 11:29:12 +00:00
fros4943
0fc2178857 added queuebuf conf 2007-12-13 08:00:51 +00:00
nvt-se
486ea95b4f Limited support for energy estimation. 2007-12-10 12:49:08 +00:00
oliverschmidt
70321f690f Made error_exit() implementation target-specific. 2007-12-08 22:16:43 +00:00
oliverschmidt
fec41a0f44 Clarify that the driver support RR-Net only on RR as other carts tend to differ in clockport activation. 2007-12-08 21:07:34 +00:00
oliverschmidt
32ae3317a6 Several minor changes and reformatting. 2007-12-06 22:09:56 +00:00
oliverschmidt
88136ca271 Added ETH64. 2007-11-30 12:39:34 +00:00
oliverschmidt
026ba0801f Added LANceGS. 2007-11-30 12:35:18 +00:00
adamdunkels
f9fdafd858 Removed unused vnc client 2007-11-29 07:56:46 +00:00
fros4943
3bfa34f4c3 removed the symbols dummy target 2007-11-29 04:57:04 +00:00
adamdunkels
b2f030897c Removed unused file rom.c 2007-11-28 23:31:53 +00:00
adamdunkels
be300d6765 Removed inclusion of unused file cxmac.h 2007-11-28 23:28:35 +00:00
nifi
867f87d35a removed local watchdog (conflicts with cpu/msp430/watchdog.c) 2007-11-28 22:04:56 +00:00
nifi
c40a2071f0 changed to use radio_sensor directly instead of a variable depending on interrupts 2007-11-28 21:28:03 +00:00
nifi
377ad07d77 return the last decoded value instead of the last value read during an interrupt 2007-11-28 21:26:35 +00:00
nifi
0b44c75e94 added compiler error when compiled without nodeid=<the ID of the node> 2007-11-28 19:53:09 +00:00
oliverschmidt
d6deb82df8 Fixed typo. 2007-11-28 17:57:52 +00:00
oliverschmidt
2bec16e07d Added some info on the apple2enh plattform. 2007-11-28 17:55:43 +00:00
oliverschmidt
bb5c0b3c73 Added some info on the c64 plattform. 2007-11-28 17:55:11 +00:00
oliverschmidt
171c84a9d9 Added some info on the win32 platform. 2007-11-28 17:12:11 +00:00
adamdunkels
f21225eb1c More reasonable current draw numbers + multiply by voltage 2007-11-28 17:06:55 +00:00
oliverschmidt
2e1b1acfaa Now that there's a Cygwin based build there's no more need to drive people to use Visual Studio - if they aren't already experienced and want to use it. 2007-11-28 16:51:17 +00:00
oliverschmidt
75c49f8d7b Added CTK_CONF_HYPERLINK in order to keep them ;-)) 2007-11-28 16:41:35 +00:00
adamdunkels
8a6309aa45 Changed UIP_UDP -> UIP_CONF_UDP 2007-11-28 15:32:25 +00:00
adamdunkels
40d9045a2d Moved energy estimation initialization before starting processes so that processes may turn things on and off without messing up the energy estimates 2007-11-28 14:45:22 +00:00
adamdunkels
d6c597cf0b Added missing sys/select.h include 2007-11-28 14:16:12 +00:00
nvt-se
4a5ad23ff4 Make it compile on Linux. tz isn't used anyway. 2007-11-28 13:01:02 +00:00
adamdunkels
a725de0f79 Reimplemented waiting with select() instead of nanosleep(). Let's see if Linux compiles this code now... 2007-11-28 12:54:41 +00:00
matsutsuka
9f753bf737 network configuration has been modified for appropriate compilation 2007-11-28 10:11:55 +00:00
matsutsuka
16f9b124c4 a minor glitch (apps setting) has been fixed 2007-11-28 10:03:40 +00:00
matsutsuka
5318ab9e2e Additional support for main files. 2007-11-28 09:44:27 +00:00
matsutsuka
825c793b92 Several configuration variables have been added to support loader and applications 2007-11-28 09:44:03 +00:00
matsutsuka
b00156d9b0 Makefiles are entirely reformed to make configuration easier. 2007-11-28 09:43:01 +00:00
matsutsuka
5682272b78 Platform specific loader, which is yet supported. 2007-11-28 09:41:41 +00:00
matsutsuka
04af453e72 Special version of web server that consumes less memory. 2007-11-28 09:40:13 +00:00
matsutsuka
2555d7fdf0 Added experimental logging support for debug. 2007-11-28 09:39:30 +00:00
matsutsuka
e1456c5522 Some changes have been applied to support various CTK configurations. 2007-11-28 09:38:21 +00:00
matsutsuka
5d1aaa4fe8 CTK has been changed. 2007-11-28 09:37:11 +00:00
matsutsuka
874217b5b7 initialization added 2007-11-28 06:15:19 +00:00
matsutsuka
c1f7c16f7d Network client (simpletelnet) 2007-11-28 06:14:11 +00:00
oliverschmidt
bcfc99fa5b Limit the maximum number of simultaneous connections to the cfs webserver to the maximum number of open files. 2007-11-28 00:00:29 +00:00
oliverschmidt
a91fe3ea98 Limit the maximum number of simultaneous connections to the cfs webserver to three because there's not enough memory left on the heap for more open files anyway - ProDOS 8 needs 1kB of page-aligned heap per open file :-( 2007-11-27 22:03:29 +00:00
oliverschmidt
963cc8b31e Made use of config file read function. 2007-11-27 21:50:19 +00:00
oliverschmidt
0d8d5c7c5c Added (default) binary config file. 2007-11-27 21:46:35 +00:00
nvt-se
34ebd14ec7 Removed usleep and moved the pseudo-random factor to nanosleep's argument. 2007-11-27 20:45:15 +00:00
adamdunkels
90c13c2603 Added time.h include to get nanosleep to compile 2007-11-27 20:32:08 +00:00
oliverschmidt
ef55496de0 Use common log implementation for cc65 targets. 2007-11-27 16:50:02 +00:00
oliverschmidt
380407ae5a Reduced stacksize. 2007-11-27 12:24:03 +00:00
adamdunkels
4eae027dd3 Changed usleep() to nanosleep() 2007-11-26 23:28:33 +00:00
oliverschmidt
953212e297 Set the maximum number of simultaneous connections to the cfs webserver to the maximum number of uIP connections. 2007-11-26 21:52:26 +00:00
oliverschmidt
f779a8cdff Set the maximum number of simultaneous connections to the cgi webserver to the maximum number of uIP connections. 2007-11-26 21:38:32 +00:00
nifi
cc51c0220b changed NETWORKDRIVERS to shorter NETSTACK 2007-11-26 19:35:06 +00:00
nifi
fa5a20f948 added ctimer init + printout of the autostarted processes 2007-11-26 19:34:23 +00:00
fros4943
06ce414c56 updated bad file info 2007-11-25 22:48:35 +00:00
fros4943
d6f46bfcaa minor fix for SYMBOLS 2007-11-25 22:47:43 +00:00
fros4943
8aac8cde97 removed unused old stuff 
+ introduced COOJA definition
 2007-11-25 22:47:18 +00:00
fros4943
014c6c82e1 moved test applications from platform root to separate directory 2007-11-25 22:45:56 +00:00
fros4943
6f862c4506 removed warnings 2007-11-25 22:45:04 +00:00
fros4943
4436819336 updated interface 2007-11-25 22:44:06 +00:00
oliverschmidt
9c5f62d361 Switched to lowercase file name and do consistently "first-log then operate". 2007-11-25 22:21:19 +00:00
oliverschmidt
0df5958e16 Do consistently "first-log then operate". 2007-11-25 22:19:49 +00:00
oliverschmidt
3027f98b80 Switched to lowercase file name to allow for successful driver loading from C64 DOS file system. 2007-11-25 22:16:59 +00:00
oliverschmidt
74c4e10f23 No reason to not just compile petsciiconv.c for all cc65 targets. 2007-11-25 21:43:55 +00:00
oliverschmidt
f302b5e731 Activated PETSCII support on the C64. 2007-11-25 17:12:45 +00:00
oliverschmidt
b26ff75aad Added user feedback on Ethernet configuration. 2007-11-25 15:15:05 +00:00
oliverschmidt
20d395e9b6 Added user feedback on IP configuration. 2007-11-25 15:00:32 +00:00
oliverschmidt
45c836c289 Adjusted dummy return value to (new) cfs interface. 2007-11-24 21:29:07 +00:00
oliverschmidt
0eb7106bd2 Include dummy for posix function missing in cc65 C-library. 2007-11-24 13:02:27 +00:00
oliverschmidt
0ed29ca43f Include dummies for posix functions missing in cc65 C-library. 2007-11-24 13:00:27 +00:00
oliverschmidt
e5f7fc8594 Made cfs implementation adhere to (new) cfs interface and streamlined implementation. 2007-11-22 12:03:54 +00:00
nifi
d16836d9bb changed to show Contiki version, node id, and autostarted processes at startup 2007-11-21 16:41:44 +00:00
oliverschmidt
645be6acbc Made use of the generic Ethernet driver for cc65 targets. 2007-11-20 22:24:03 +00:00
oliverschmidt
7c1cbd4ee2 Added speed detection user feedback and adjusted soft clock to ethernet polling. 2007-11-20 21:54:06 +00:00
oliverschmidt
8ebc56aad5 Shortened welcome message. 2007-11-20 21:24:25 +00:00
oliverschmidt
aa7dd83d5d Made use of the generic Ethernet driver for cc65 targets. 2007-11-20 21:19:12 +00:00
adamdunkels
a1f11ff8e7 Removed includes for stuff that has been moved to the backyard. Added <stdint.h> include 2007-11-19 12:23:02 +00:00
adamdunkels
477d39ce5b Fixed function prototypes to match radio API 2007-11-19 09:50:54 +00:00
oliverschmidt
1c0aa8a0e4 Source reformatting only. 2007-11-18 13:24:34 +00:00
nvt-se
46b6ce9193 Conform to the radio_driver interface. 2007-11-18 12:25:22 +00:00
adamdunkels
58d442ab2f Removed buggy button.c that is and should not be used 2007-11-18 12:02:49 +00:00
oliverschmidt
12c6074a75 Moved logically empty files to backyard. 2007-11-18 02:39:10 +00:00
oliverschmidt
c1e1249bc2 Removed compiler warnings. 2007-11-18 02:36:07 +00:00
oliverschmidt
6ab83029c3 Source reformatting only. 2007-11-18 02:17:33 +00:00
oliverschmidt
86a745f923 Removed compiler warnings. 2007-11-18 02:16:57 +00:00
oliverschmidt
d11e1e6fd2 Removed reference to logically empty file. 2007-11-18 01:13:56 +00:00
oliverschmidt
6d6edb418b Declare strcasecmp here as it isn't part of C99. 2007-11-18 00:55:19 +00:00
oliverschmidt
f52ae57d99 Declare strcasecmp here as it isn't part of C99. 2007-11-18 00:46:26 +00:00
oliverschmidt
90edc773b0 Introduced C99 sized int types. 2007-11-17 22:40:33 +00:00
oliverschmidt
062e2a1ce4 Removed compiler warning. 2007-11-17 20:13:54 +00:00
adamdunkels
d6dc8763e9 Fixed dereference of void * pointer 2007-11-17 18:28:23 +00:00
adamdunkels
66b5644e07 Fixed compiler warnings to make code compile with gcc's -pedantic switch 2007-11-17 18:26:06 +00:00
adamdunkels
1e1e44a3f8 Fixed compiler warnings to make code compile with gcc's -pedantic switch 2007-11-17 18:01:00 +00:00
adamdunkels
d9eebf7e17 Fixed compiler warnings 2007-11-17 10:46:25 +00:00
adamdunkels
ff45f9d2c4 Added watchdog support 2007-11-17 10:29:33 +00:00
fros4943
79c38ef8df minor updates in cooja cfs_ram 2007-11-16 09:21:49 +00:00
nifi
a6d827fa1f moved initialization of ctimer to allow MAC layer to use ctimers 2007-11-15 13:07:42 +00:00
nvt-se
33e565d20a Removed unused variables. 
Initialize header.
 2007-11-14 11:17:30 +00:00
adamdunkels
f1271464fd Turned on energy estimation and profiling by default 2007-11-13 21:10:50 +00:00
adamdunkels
2140576ac9 Added battery-sensor.c 2007-11-13 20:37:18 +00:00
adamdunkels
d34f8e0dcc Preliminary untested code for the internal MSP430 battery sensor 2007-11-13 20:29:07 +00:00
nvt-se
c90a758ac5 Detect if the medium is busy right before sending. 2007-11-12 21:17:47 +00:00
adamdunkels
b51977a693 Added Doxygen documentation 2007-11-10 20:45:29 +00:00
adamdunkels
ca6abb286b Added LEDs notification. THe program won't compile without a nodeid=XXX now 2007-11-10 20:45:00 +00:00
adamdunkels
d5430dc4dc Added better boot-up behaviour of the LEDs - they can now be used to determine where in the boot sequence the node hangs (if it hangs) 2007-11-10 20:44:30 +00:00
nvt-se
0e4429068b Added a carrier sensing function. 2007-11-07 15:34:41 +00:00
nvt-se
ee59f1fe34 Use a fresh RSSI value in the read function. 2007-11-07 15:26:00 +00:00
nvt-se
a604013a88 Added more flags for the status register. 2007-11-07 15:23:35 +00:00
adamdunkels
0ce1708c76 #ifdef around RF_CHANNEL 2007-11-06 20:28:09 +00:00
nvt-se
366d845336 DMA destination is now given as a parameter instead of being hardwired. 2007-11-06 15:08:55 +00:00
nvt-se
dc8b6e7dcd Removed some unused headers and definitions. 2007-11-06 14:48:18 +00:00
nvt-se
882f340f17 Use a counter for the test so lost packets are spotted easily. 2007-11-06 14:44:42 +00:00
joxe
1d447dc043 added button sensing and leds-blinking for better sensor demo 2007-10-26 12:37:48 +00:00
adamdunkels
dd8469ee4a Added inclusion of Tmote Sky bulk upload makefile 2007-10-25 13:28:15 +00:00
adamdunkels
d2f90802de Compile profiling support only if PROFILE_CONF_ON is defined 2007-10-25 10:21:48 +00:00
adamdunkels
a9e4287cbe Changed the energy estimation type ENERGEST_TYPE_RECEIVE to ENERGEST_TYPE_LISTEN to highlight that energy is spent on idle listening, not just the actual reception of packets 2007-10-25 09:30:39 +00:00
zhitao
ff006a5103 keep in synch with the Rime abstraction 2007-10-25 08:26:49 +00:00
nvt-se
e7dc3ec422 Initialize ctimer. 2007-10-24 13:47:50 +00:00
adamdunkels
910c9ea161 Added profiling support, made rime/mac initialization nicer 2007-10-23 21:29:40 +00:00
fros4943
7512df3f7b removed bad memcpy:s 2007-10-23 12:16:13 +00:00
nifi
217056b8bd sht11 architecture support for Sky 2007-10-23 08:53:50 +00:00
fros4943
28ddccef19 added missing function declarations 2007-10-22 13:08:13 +00:00
nvt-se
e57310c0b3 Removed duplicated statement. 2007-10-22 13:07:00 +00:00
nvt-se
06f923e502 Simple test for the SHT11 driver. 2007-10-22 13:05:30 +00:00
nvt-se
91b79de654 Use sht11 driver. 2007-10-22 12:21:20 +00:00
nvt-se
045225fa05 Made driver less platform-dependent and added support for msb-430. 2007-10-22 12:19:58 +00:00
nvt-se
0c9db3caa3 Moved to core/dev. 2007-10-22 12:19:31 +00:00
nvt-se
406cc6d5a8 Set channel to RF_CHANNEL after simple_cc2420_init. 
Otherwise the init function would reset the channel to 11.
 2007-10-12 12:47:32 +00:00
nvt-se
2d0225b0e4 Safeguard for invalid packets. 2007-10-04 10:02:08 +00:00
nvt-se
fb9b800c53 More clear power down procedure. Now it is required that cc1020_on 
is called before anyone can send after the power down.
 2007-10-02 14:05:45 +00:00
nvt-se
4e8bdb1c08 Power managment is handled by another layer. 2007-10-01 11:59:36 +00:00
nvt-se
c0686e80f1 Added definitions for the MAIN register. 2007-10-01 11:56:49 +00:00
matsutsuka
d6ec25e37c The libconio_arch-small is architecture-depend implementation of console I/O with minimum size for the server mode. 2007-09-30 12:46:34 +00:00
matsutsuka
c2472ff0f1 contiki-main file for network client support. 2007-09-29 04:13:14 +00:00
matsutsuka
4381f4b964 Platform-depend CTK support is modified to minimize size of module. 2007-09-29 04:10:00 +00:00
matsutsuka
9e1e31f3bb Makefiles have been modified to support customized crt0. 2007-09-29 04:07:00 +00:00
matsutsuka
c3d13b6dd4 Configuration file now supports: 
- telnet window size
- UIP configuration
- new rs232 driver
 2007-09-29 04:05:20 +00:00
fros4943
87e32f037e enabled config of entire ar command, not only arguments 2007-09-28 07:21:21 +00:00
nvt-se
b72c228379 * Enable rtimers. 
* Specify port direction first.
 2007-09-21 14:53:36 +00:00
nvt-se
24ffa8cfaf support third DMA line. 2007-09-21 13:51:09 +00:00
nifi
9d75d6d153 enabled inline functions 2007-09-19 14:09:31 +00:00
matsutsuka
c99b7dc827 status has been added for polling function. 2007-09-19 12:47:19 +00:00
matsutsuka
8d7bb2119c Architecture-depend CTK implmeentation has been all rewritten by assembler for performance and memory reasons. 2007-09-19 12:46:15 +00:00
matsutsuka
b2a6d163fc configuration for serial has been changed. 2007-09-19 12:44:45 +00:00
nvt-se
bbecdd9c34 removed uncommented line. 2007-09-14 19:27:22 +00:00
nvt-se
87018b2af5 use uint16_t to be specific about id type size. 2007-09-14 19:24:45 +00:00
nvt-se
5e7a435959 do not declare msp430_cpu_init here. 2007-09-14 19:24:07 +00:00
nvt-se
6955e028da Use splhigh and splx. 2007-09-14 19:20:54 +00:00
nvt-se
290f41db06 better comments. 
enable interrupt later.
 2007-09-14 19:20:24 +00:00
nvt-se
ca733ddfce Added some statistics. 2007-09-14 19:14:54 +00:00
nvt-se
928c22eda1 Minor refactoring and improved compliance with the radio interface. 2007-09-14 18:51:51 +00:00
matsutsuka
71e5298d90 Process "kill" is properly implemented. 2007-09-11 12:55:57 +00:00
matsutsuka
661476ad92 PC-6001mkII setting is added. 2007-09-11 12:55:35 +00:00
matsutsuka
809b23fe28 Configuration of regular ctk-conio.c has been added. 2007-09-11 12:55:16 +00:00
matsutsuka
6dd93a3d04 NEC PC-6001 support sources are initially added. 2007-09-11 12:12:59 +00:00
fros4943
db74bb6566 changed link argument sent to makefile: 
instead of using linker, user may specify linker line including tools
 2007-09-05 14:00:59 +00:00
oliverschmidt
89e81f9eed Renamed 6502-conf.h into 6502def.h to be in line with similiar files created in the meanwhile and added C99 names. 2007-09-05 10:59:10 +00:00
ksb
6441821fc3 Forgot to add this file 2007-09-01 11:17:25 +00:00
ksb
73dfa52324 Changes IP address so it won't collide with the Tmote. 2007-09-01 10:09:11 +00:00
ksb
2bbf074f39 Added a gateway application the routes between SLIP on USB and the radio. 2007-09-01 10:06:05 +00:00
fros4943
974fcb66d4 convenience function for cooja. 
converts printf()'s to log_message()'s
 2007-08-23 08:14:30 +00:00
fros4943
6d86b77cfe setting rime id at init 2007-08-23 07:35:26 +00:00
fros4943
d272b062f0 reimplemented receiver calls (earlier tcpip_input) from inside multithreaded environment 2007-08-21 13:09:40 +00:00
ksb
e55dbe433b Build system improvements. 2007-08-21 09:06:23 +00:00
nvt-se
186a99857b minor adjustments for ip. 2007-08-20 11:39:03 +00:00
nvt-se
81174c6389 cr->lf 2007-08-20 11:01:13 +00:00
nvt-se
aee4c71200 Use test-abc instead of core. 2007-08-17 13:10:16 +00:00
nvt-se
6dffb0ed63 unnecessary file. 2007-08-17 13:08:38 +00:00
nvt-se
96e06d1dde Standardized integer types. 
Removed unecessary volatility.

Make sure that the random back-off is only if the channel is busy.
 2007-08-16 20:38:40 +00:00
nvt-se
defbe1d9ac use new function. 2007-08-16 20:29:56 +00:00
nvt-se
9017949535 Improved interface and C standard compatibility. 2007-08-16 20:29:18 +00:00
nvt-se
6983417307 forgot return. 2007-08-16 17:10:49 +00:00
nvt-se
8b3e9477d9 call dma_init. 2007-08-16 13:54:58 +00:00
nvt-se
d5027f0041 Subscribe to DMA events on line 0 for the radio. 2007-08-16 13:52:17 +00:00
nvt-se
0723f1fbc7 Make it possible to subscribe to DMA events. 2007-08-16 13:51:57 +00:00
nifi
2780aef873 Include msp430def.h for standard defines 2007-08-16 13:35:33 +00:00
nvt-se
fefe56d913 Changes to standard types. 2007-08-16 13:24:57 +00:00
bg-
f398e56048 * Include avrdef.h for standard defines. 
* Define AODV_COMPLIANCE.
 2007-08-16 13:24:20 +00:00
nvt-se
5db2990884 Use the new type definitions file for msp430. 2007-08-16 13:23:41 +00:00
bg-
a20c9e6abb * Include msp430def.h for standard defines. 
* Remove obsolete LPM_CONF_OFF definition.
 2007-08-16 13:10:53 +00:00
oliverschmidt
c42cbe3141 Added a naive clock implementation based on main loop counting for the Apple2 as it doesn't have a hardware clock. 2007-08-10 13:30:02 +00:00
nifi
296ad6cdb7 Updated to new radio_driver API 2007-08-07 11:20:11 +00:00
nifi
7e57cd240a Updated to new radio_driver and mac_driver APIs 2007-08-07 11:17:54 +00:00
nifi
cc80dbf546 removed obsolete rime code for tr1001 2007-08-07 11:16:19 +00:00
nifi
d74d8d176d Updated to new radio_driver API, removed obsolete rime code 2007-08-07 11:14:39 +00:00
nifi
fb54bba19e Updated to new radio_driver API + LPM4_EXIT instead of LPM_AWAKE() 2007-08-07 11:11:19 +00:00
nifi
39c12bad29 Added stdint.h 2007-08-07 11:09:38 +00:00
nifi
6b2cd5c2d4 LPM4_EXIT instead of LPM_AWAKE() 2007-08-07 11:06:14 +00:00