Ralf Schlatterbeck
cfec3c6e2d
Initial implementation of avr hardware timer
...
Mainly for PWM use for now.
With example to set the LED to different brightness via COAP.
We switch the LED with 50 kHz (20µs) in this example.
2014-11-19 13:47:37 +01:00
Ralf Schlatterbeck
b4fb8c3f52
Add wallclock time handling
...
New application and new example.
We use the built-in timer routines and add an offset to get the
wallclock time. The offset can be set by time-changing routines
(currently only settimeofday).
We also maintain an offset for timezone handling but this isn't
currently fully implemented.
2014-11-19 13:43:45 +01:00
Harald Pichler
b886a1faaf
initial upload
2014-11-19 13:43:19 +01:00
Harald Pichler
15bab74093
initial upload
2014-11-19 13:43:12 +01:00
Harald Pichler
465eb28382
cleanup code
2014-11-19 13:43:05 +01:00
Harald Pichler
38dbf611e6
add Arduino pin definition and commands
2014-11-19 13:42:57 +01:00
Ralf Schlatterbeck
56f6f87c94
Allow changing bootloader_get_mac address
...
Current default in the Makefile is the *new* bootloader address.
But for backward compatibility we've modified the run*.sh files
to use the old address. The run*.sh also now explain how to change
the default.
2014-11-19 13:42:35 +01:00
Harald Pichler
1efbe0736a
change resources to simple and make climate2 default
2014-11-19 13:42:13 +01:00
Harald Pichler
d90e0d622d
get s/button ->show button status 0/1
2014-11-19 13:42:05 +01:00
Harald Pichler
c106898d2b
add 0.5s delay between off and on
2014-11-19 13:41:54 +01:00
Harald Pichler
94d764e4cb
add timer and shutter functionality
2014-11-19 13:41:48 +01:00
Harald Pichler
4d383eb923
change to port F6,F7
2014-11-19 13:41:18 +01:00
Harald Pichler
678891a1a9
change battery and cpttem format to xx.xx
2014-11-19 13:41:08 +01:00
Harald Pichler
a656cf1dcd
add shutter control resources, reset,timer
2014-11-19 13:41:00 +01:00
Harald Pichler
03a4081913
add contiki led, remove led1,led2
2014-11-19 13:40:52 +01:00
Harald Pichler
8905f35d72
simplify project-conf.h
2014-11-19 13:40:45 +01:00
Harald Pichler
26b1e874d6
bugfix statusled include
2014-11-19 13:40:38 +01:00
Harald Pichler
affe81cc6d
bugfix includes and names
2014-11-19 13:40:29 +01:00
Harald Pichler
1ca7b52217
remove not needed binary files
2014-11-19 13:39:43 +01:00
Harald Pichler
46df18ceb1
add /s/cputemp resource
2014-11-19 13:39:26 +01:00
Harald Pichler
a90a6e0f65
add /p/name and p/model resource, remove info
2014-11-19 13:39:19 +01:00
Marcus Priesch
630bd8e9e4
Factored to support configurable amount of pwm's, fixes
2014-11-19 13:38:58 +01:00
Marcus Priesch
85d29b6473
initial check in
2014-11-19 13:38:51 +01:00
Harald Pichler
088c7118e0
compile all osd-examples
2014-11-19 13:38:38 +01:00
Harald Pichler
4760891bb4
simplified led resource to one led actuator
2014-11-19 13:38:29 +01:00
Harald Pichler
425f348daa
initial upload
2014-11-19 13:38:16 +01:00
Harald Pichler
11b13a7a7e
remove link status and bugfix params.c
2014-11-19 13:37:41 +01:00
Harald Pichler
f2bd00b660
add patch milligrad ds1820 from Jan-Benedict Glaw
2014-11-19 13:37:33 +01:00
Harald Pichler
9906e9736c
temp and hum sensors values xxxx -> xx.xx
2014-11-19 13:37:21 +01:00
Harald Pichler
e5baf940e7
add dhtxx temp coap
2014-11-19 13:37:13 +01:00
Harald Pichler
1b04a24022
config panid over defines
2014-11-19 13:37:06 +01:00
Harald Pichler
8b323633cd
define new tria pins, configurable type ligt or shutter or plug
2014-11-19 13:36:58 +01:00
Harald Pichler
35668c8aed
initial upload
2014-11-19 13:36:52 +01:00
Harald Pichler
7ea29294d7
cleanup code add coap13 support
2014-11-19 13:36:44 +01:00
Harald Pichler
fd57fcef72
cleanup code, add coap13 support
2014-11-19 13:36:28 +01:00
Harald Pichler
a9b36497f6
del unused files
2014-11-19 13:36:19 +01:00
Harald Pichler
3a3091c884
del unused file
2014-11-19 13:36:10 +01:00
Harald Pichler
f7e4fb6499
code cleanup
2014-11-19 13:35:58 +01:00
Harald Pichler
cc950ace98
cleanup code
2014-11-19 13:35:47 +01:00
Harald Pichler
96f1264120
remove old project use climate instead
2014-11-19 13:35:36 +01:00
Harald Pichler
fa7920952f
delete old example
2014-11-19 13:35:27 +01:00
Harald Pichler
c3f00a7106
cleanup code
2014-11-19 13:35:18 +01:00
Harald Pichler
829cd2517d
cleanup code
2014-11-19 13:35:10 +01:00
Harald Pichler
09813190aa
20 neighbors with status and routes
2014-11-19 13:34:55 +01:00
Harald Pichler
171c1290c3
update boarder router to new rpl tables
2014-11-19 13:34:47 +01:00
Harald Pichler
e2edd006d4
initial upload
2014-11-19 13:34:27 +01:00
Harald Pichler
837f70770a
cleanup plattform defines, disable energest, radiostatistics
2014-11-19 13:34:20 +01:00
Harald Pichler
29c7297591
bugfix RH03 sensor
2014-11-19 13:33:50 +01:00
Harald Pichler
45ede69308
add dht22 and RHT03 support
2014-11-19 13:33:40 +01:00
Harald Pichler
7cc5312937
update coap13
2014-11-19 13:33:02 +01:00
