Commit graph

2117 commits

Author SHA1 Message Date
Maria Laura Stefanizzi 22f39ab4ff MEMS I2C integration.
This patch allows the MEMS driver to use the i2c driver.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi a9c0768fd6 Integrate I2C driver into board initializzation
This patch add I2C initializzation for board with I2C devices.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi c7b1248aac mbxxx I2C driver.
This patch add the I2C driver for mbxxx platform to communicate with
devices connected to the SC2 I2C bus.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
2013-11-27 15:40:07 +01:00
Adam Dunkels 0d04db2b03 Merge pull request #428 from g-oikonomou/config-sanity
Remove unnecessary stuff from various Makefiles (Config Sanity, Pt 1)
2013-11-26 15:05:08 -08:00
Benoît Thébaudeau 436b585d7e cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED
As the comment in contiki-conf.h says, the automatic definition of
SLIP_ARCH_CONF_ENABLED works only if UIP_FALLBACK_INTERFACE is tied to SLIP. If
UIP_FALLBACK_INTERFACE is set to another interface, SLIP_ARCH_CONF_ENABLED is
still automatically set to 1, leading to unwanted SLIP_END characters from
dbg.c:putchar() being printed on the UART.

This change makes it possible to force the definition of SLIP_ARCH_CONF_ENABLED
(e.g. from project-conf.h), so that it can be disabled if UIP_FALLBACK_INTERFACE
is used with something else than SLIP.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 20:48:52 +01:00
Benoît Thébaudeau d2f3795a30 cc2538: Clean up port and pin definitions
Homogenize port and pin definitions naming:
 - PERIPHERAL_FUNCTION_PORT for the port ID,
 - PERIPHERAL_FUNCTION_PIN for the pin ID,
 - PERIPHERAL_FUNCTION_PORT_BASE for the port base,
 - PERIPHERAL_FUNCTION_PIN_MASK for the pin mask.

Define only PERIPHERAL_FUNCTION_PORT and PERIPHERAL_FUNCTION_PIN in board.h, and
deduce PERIPHERAL_FUNCTION_PORT_BASE and PERIPHERAL_FUNCTION_PIN_MASK in the
driver from the former definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 15:00:41 +01:00
Adam Dunkels bb2dcaa057 A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix 2013-11-24 20:20:11 +01:00
Adam Dunkels 19b32c54c0 Removed the old unused hc.[ch] code 2013-11-24 11:02:35 +01:00
Adam Dunkels cb8fc35e25 Removed the redbee platforms 2013-11-22 16:33:06 +01:00
Adam Dunkels eb99534c43 Removed the stk500/stk501 platforms 2013-11-22 16:33:06 +01:00
Adam Dunkels d68ce09fd5 Removed the stepper-robot platform 2013-11-22 16:33:06 +01:00
Adam Dunkels 13117203e0 Removed pc-6001 platform 2013-11-22 16:33:05 +01:00
Adam Dunkels 44370be06f Removed old, unused msp430-based platforms 2013-11-22 16:33:05 +01:00
Fredrik Osterlind b5c94910ac Renamed Java packages to match our contiki-os.org domain. Note that this commit does not affect external dependencies
like /tools/mspsim.

This is a very simple modification that affects a very large number of files in Contiki: Cooja,
/platform/cooja, Collect-view, Coffe-manager, and Cooja simulation files (.csc).

I've gone through Contiki to update all references I could find. Nevertheless, this commit will likely
break external dependencies, like saved Cooja simulation files.
2013-11-20 16:43:27 +01:00
George Oikonomou 4eeb527cb8 Don't specify -DUIP_CONF_IPV6 in platform makefiles
Makefile.include has done it for us already, we no longer need to do so ourselves
2013-11-20 14:52:33 +00:00
Nicolas Tsiftes d183b87f4b Merge pull request #434 from adamdunkels/push/cleanup-sys
Remove old unused code from the core/sys/ directory
2013-11-19 09:53:57 -08:00
Adam Dunkels 523c03e4b8 Removed old unused profile.h code 2013-11-19 08:31:52 +01:00
Yvonne-Anne Pignolet 83ae37b48e Add access to LQI and RSSI to Contiki motes 2013-11-18 15:05:23 +01:00
George Oikonomou b10c78f854 Merge pull request #425 from ADVANSEE/cc2538-gpio
cc2538: gpio: Bug fix and various improvements
2013-11-15 13:04:09 -08:00
George Oikonomou 98a1f2dfa9 Merge pull request #408 from ADVANSEE/cc2538-uart
cc2538: lpm: Add registration mechanism for peripherals and use it
2013-11-15 12:57:03 -08:00
Benoît Thébaudeau 680050861c cc2538: gpio: Use accessor macros
Use the GPIO accessor macros instead of copying raw register access code all
over the place. This is cleaner and less error prone.

This fixes the setting of the USB pull-up resistor that worked only by chance on
the CC2538DK because it is controlled by the pin 0 of the used GPIO port.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 19:57:44 +01:00
Benoît Thébaudeau 0692ee251d cc2538: usb: Use the new LPM peripheral registration
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 17:14:45 +01:00
Benoît Thébaudeau d35732505b cc2538: lpm: Add registration mechanism for peripherals
Some peripherals have their clocks automatically gated in PM1+ modes, so they
cannot operate. This new mechanism gives peripherals a way to prohibit PM1+
modes so that they can properly complete their current operations before
entering PM1+.

This mechanism is implemented with peripheral functions registered to the LPM
module. These functions return whether the associated peripheral permits or not
PM1+ modes. They are called by the LPM module each time PM1+ might be possible.
If any of the peripherals wants to block PM1+, then the system is only dropped
to PM0.

Partly from: George Oikonomou
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 17:09:22 +01:00
George Oikonomou d08a87880c Merge pull request #410 from ADVANSEE/cc2538-sys_ctrl
cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal
2013-11-15 07:42:45 -08:00
Benoît Thébaudeau 47d570343e cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 15:52:10 +01:00
Benoît Thébaudeau 6452624120 cc2538dk: Make it possible to override UIP_CONF_TCP_MSS
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-15 15:41:58 +01:00
Adam Dunkels f2f0540051 Merge pull request #331 from alessandrelli/msp430-gcc-4.7-flags-wismote
Add mspgcc 4.7.x flags to the wismote makefile
2013-11-14 12:30:47 -08:00
George Oikonomou 2893af5e5d Document alternative toolchain for the CC2538DK 2013-11-14 12:22:21 +00:00
Adam Dunkels df2d2f53c2 Merge pull request #407 from cmorty/submodule
Add submodule support for MSPSim and get Travis green again.
2013-11-14 03:22:03 -08:00
Oliver Schmidt 2d7d1b123d Added 6502 driver for WIZnet W5100 in MACRAW mode. 2013-11-09 23:15:20 +01:00
Moritz 'Morty' Strübe c67c048cac Clean up setting channel and CCA-threshold for CC2420 based motes.
The CCA-threshold now defaults to -46 which give better simulation
results and typically also better experimental results.
This adjustment is also needed due to commit 0a13f99 in mspsim. As
promised in https://github.com/mspsim/mspsim/pull/18 it broke the
regression tests.
2013-11-07 17:28:33 +01:00
Christian Taedcke ae6972426d Added support for STM32w boards MB950 and MB951 revision B. 2013-10-19 16:58:54 +02:00
Oliver Schmidt c6474cc8bc Final adjustments for the switch from 'atari' to 'atarixl'. 2013-10-06 17:23:39 +02:00
Oliver Schmidt 37b66bac5a Finetuned Atari XL memory layout.
The Telent server includes both uIP logging and uIP client functionality. Therefore uip.o is somewhat larger.
2013-10-05 23:51:49 +02:00
Oliver Schmidt 57d9c43a33 Removed support for 'atari' now that 'atarixl' is part of the cc65 master. 2013-10-03 22:55:32 +02:00
Oliver Schmidt 149f3834e6 Adjusted Makefile to the final 'atarixl' cc65 target.
- Assign source files to the splitted shadow RAM areas.
- Switched to dynamic Ethernet driver loading.
2013-10-03 22:40:25 +02:00
George Oikonomou 2957d44ff8 Merge pull request #352 from lab11/cc2538-spi-driver
Added SPI driver for CC2538
2013-09-28 13:25:17 -07:00
Brad Campbell e2af903d05 Added SPI driver for CC2538
This uses the core/dev/spi.h header and implements the spi_init()
function and the various macros for SPI operation. ssi.h contains all of
the register locations and information.

This implementation is not very versatile, mostly because I don't how to
make it flexible in the contiki system. It supports pin muxing for the
four spi pins, but other than that picks sensible defaults.

The SPI macros (like SPI_READ()) are defined in
cpu/cc2538/spi-arch.h. In order to use the SPI driver, add the following
includes to your project:

    #include "spi-arch.h
    #include "dev/spi.h"
2013-09-27 17:46:15 -04:00
Brad Campbell 766fc5a174 Add conf checks to CC2538dk conf file
Allows for specific apps to control more settings of the platform.
2013-09-11 21:43:13 -04:00
Oliver Schmidt 17bbded894 Allow text screen memory to be aligned to 0x2000. 2013-09-10 20:59:19 +02:00
Oliver Schmidt 6fc83cf601 Initialize tcpip process before resolver process.
Since introduction of mDNS (f145c17039)
the resolver process initialization depends on the tcpip process
already being initialized (because of the call to udp_new()).
2013-09-01 20:53:51 +02:00
Simon Duquennoy 248301a041 Fix naming issues and includes in uip-ds6-nbr.h 2013-08-19 17:48:30 +02:00
Simon Duquennoy 5dc05e7913 Port apps, examples, platforms and tools so they use the new neighbor and route API. 2013-08-19 17:48:30 +02:00
Simon Duquennoy ff093a2b50 Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead. 2013-08-19 17:48:30 +02:00
Fredrik Osterlind 150807f2e6 removed rpl configuration, instead using contiki default values 2013-08-16 15:06:31 +02:00
Fredrik Osterlind 8041f66d8c link-layer acks support for cooja motes 2013-08-15 14:32:35 +02:00
Fredrik Osterlind 3caf1bfab4 cooja motes rimestats 2013-08-15 11:56:12 +02:00
Daniele Alessandrelli e82d201ca5 Added mspgcc 4.7.x flags to the Wismote makefile 2013-08-12 16:37:45 +02:00
Nicolas Tsiftes 7987a6dac7 Merge pull request #328 from g-oikonomou/cc2538-uart-config
Make the CC2538 UART driver more configurable
2013-08-09 10:20:36 -07:00
George Oikonomou 4f1485e238 Remove the second 6LoWPAN context from Sensinode
This context was once used in an in-house testbed
and is not required upstream
2013-08-09 16:38:12 +01:00
George Oikonomou f30d92b101 Change the way we switch between cc2530 models
The switch is now performed through a configuration define,
which has also been renamed to better match Contiki's naming
conventions
2013-08-09 15:53:23 +01:00
George Oikonomou 1b0470687b Change the cc2531 usb stick descriptor
The CC2531 USB stick now identifies itself as a
'Texas Instruments CC2531 USB Dongle' and uses a
TI-assigmed VID:PID. The VID:PID is now configurable
in contiki- or project-conf.h
2013-08-09 15:51:58 +01:00
George Oikonomou 0614c4e720 No longer build rpl-of0 for Sensinodes 2013-08-09 15:50:47 +01:00
George Oikonomou 6a79ac3b2d Increase 8051 plaform configurability 2013-08-09 15:50:47 +01:00
George Oikonomou 70d8bd71df Disable example-defined putchar for 8051 platforms 2013-08-09 15:50:47 +01:00
George Oikonomou ecf8ca55ef Move SLIP interface define to project-conf 2013-08-09 15:50:47 +01:00
George Oikonomou fa166116b7 Auto-enable SLIP for 8051-based platforms 2013-08-09 15:50:47 +01:00
George Oikonomou 0a7094bc39 Remove leftover make targets
The sensinode platform does not support .upload and .serialdump
Their presence in the makefile has confused in the past confused
some users. This commit removes them

The commit also removes the $(OBJECTDIR)/%.rel: %.cS recipe which
is not used by either 8051 platform and is probably broken anyway,
since it has been unmaintained for years
2013-08-09 15:48:05 +01:00
George Oikonomou 6c6013b898 Make the CC2538 UART driver more configurable
* We can now very easily switch between UART0 and UART1 through a define
* We can also configure the UART RX and TX port/pin through defines
2013-08-09 12:20:25 +01:00
Adam Dunkels 70eb439a88 Merge pull request #325 from g-oikonomou/cc2538-tools-release
CC2538 IEEE address and README updates
2013-08-07 08:25:30 -07:00
George Oikonomou 81318909e0 Read IEEE address from InfoPage by default 2013-08-07 15:28:33 +01:00
George Oikonomou 6b01b36cc9 Update readme references and tool download URLs 2013-08-07 15:28:04 +01:00
George Oikonomou 64c16d4be1 Adjust a config define to its new name 2013-08-07 15:27:19 +01:00
Adam Dunkels 99c331382b Turn off the LCD by default as it is somewhat flaky 2013-08-06 21:33:03 +02:00
Adam Dunkels e147c63044 Added mspgcc 4.7.x flags 2013-08-06 21:33:03 +02:00
Oliver Schmidt 6ab336f55f Several minor consistency improvements. 2013-07-31 00:55:31 +02:00
Oliver Schmidt 8d23d1b0bb Support the recently added verbosity control. 2013-07-31 00:15:38 +02:00
Oliver Schmidt 3cda787264 Be consistent with tab chars in Makefiles. 2013-07-30 23:39:02 +02:00
Adam Dunkels 54f2109134 Merge pull request #290 from simonduq/rpl-mrhof-etx-nomc
Update of RPL MRHOF (use no metric container with ETX [RFC6719])
2013-07-29 00:56:25 -07:00
Mariano Alvira 5d19de3dbf Merge pull request #266 from ismb-pert/fix-mbxxx
mb851 platform is now the more generic mbxxx. STM32W_CPUREV environment variable is used to select the variant of STM32W to use.
2013-07-26 07:38:11 -07:00
Nicolas Tsiftes 8f5941a4c9 Merge pull request #253 from JelmerT/feature-z1-tlc59116
TLC59116 I2C led driver for Zolertia Z1
2013-07-23 11:09:02 -07:00
Simon Duquennoy defcc639ce Use no metric container when having MRHOF with ETX, as specified in RFC6719. Renamed rpl-of-etx to rpl-mrhof. 2013-07-23 19:36:38 +02:00
stefano pascali 36e7db42de Some little refactor 2013-07-19 16:15:55 +02:00
stefano pascali b43ce0f677 Travis-ci tweaks, added CPUREV to 01 regression test, needed by mbxxx platform 2013-07-12 17:07:04 +02:00
stefano pascali fcb09d5d30 Fixed mbxxx platform 2013-07-11 17:56:17 +02:00
Robert Quattlebaum 0308d3fcf0 settings: Correct a problem where sometimes CC_INLINE is not defined properly. 2013-07-02 08:46:03 -07:00
Jelmer Tiete 4e0d5cf65e Corrected copyright holder. 2013-06-24 16:13:35 +02:00
Jelmer Tiete 9810bfbcfd contiki code style changes and copyright update + added source to ARCH instead of SOURCEFILES in platform Makefile 2013-06-24 15:17:52 +02:00
Jelmer Tiete 0a4a14aacb added tlc59116 datasheet url 2013-06-24 15:17:52 +02:00
Jelmer Tiete ed8be502db tlc59116 for zolertia, added 0 values at init and code clean-up 2013-06-24 15:17:52 +02:00
Jelmer Tiete cc2567b988 working tlc59116 implementation for z1 2013-06-24 15:17:52 +02:00
Jelmer Tiete 8b61492152 first implementation for tlc59116 on z1 2013-06-24 15:17:52 +02:00
Peter A. Bigot 5fc0575e99 Makefile.include: support make clean all
Historically $(OBJECTDIR) was created when Makefile.include is read.  A
consequence is that combining "clean" with "all" (or any other build
target) results in an error because the clean removes the object
directory that is required to exist when building dependencies.
Creating $(OBJECTDIR) on-demand ensures it is present when needed.

Removed creation of $(OBJECTDIR) on initial read, and added an order-only
dependency forcing its creation all Makefile* rules where the target is
explicitly or implicitly in $(OBJECTDIR).
2013-06-20 17:45:41 -05:00
Oliver Schmidt af93e5fbd9 Merge pull request #274 from oliverschmidt/master
Made use of Atari XL shadow RAM.
2013-06-18 13:38:08 -07:00
Oliver Schmidt b90a1e2417 Made use of Atari XL shadow RAM.
The new Atari XL target allows cc65 programs to make use of
the shadow RAM. This allows to turn aon all features of the
web browser - and will allow for additional improvements to
come :-)
2013-06-18 22:36:58 +02:00
Oliver Schmidt 807293ab6d Merge pull request #267 from oliverschmidt/master
Removed some more old RCS tags from the Contiki source tree.
2013-06-13 06:55:47 -07:00
Oliver Schmidt 79bb5ea73f Removed some more old RCS tags from the Contiki source tree. 2013-06-13 15:54:26 +02:00
Matthias Kovatsch 58dd33b145 Fixing minimal-net for Cygwin. 2013-06-06 19:04:11 +02:00
Oliver Schmidt d636d7110f Added platform 'Atari XL'.
Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-)
The platform 'atarixl' will replace the platform 'atari'. However I need both for some
transition period.
2013-06-01 22:49:00 +02:00
Oliver Schmidt c138dc758a Removed obsolete file.
I wrote:
> Moved from last cc65 release (2.13.3) to recent cc65 snapshot (2.13.9).
> [...]
> Atari:
> - The builtin linker config allows to override the start addr so there no more need for a custom linker config.
> [...]
However I didn't actually remove the custom linker config not needed anymore.
2013-06-01 22:38:45 +02:00
Robert Quattlebaum 36fbbe48aa Merge pull request #244 from darconeous/pull-requests/cpu-native-tapdev-ipv6-fix
native/net/tapdev: Fix for new `UIP_CONF_IPV6` handling.
2013-05-21 17:42:44 -07:00
Nicolas Tsiftes a445c4020d Merge pull request #153 from darconeous/pull-requests/cpu-avr-bootloader
avr/bootloader.c: Now compatible with bootloaders which always run first
2013-05-20 05:49:13 -07:00
Nicolas Tsiftes 4b80ad9c89 Merge pull request #239 from darconeous/pull-requests/avr-ravenusb-rpl
avr-ravenusb/cdc_task: Fix compile issues.
2013-05-20 04:42:03 -07:00
Robert Quattlebaum 09eec82d08 Merge pull request #134 from darconeous/pull-requests/cpu-avr-avrdude-mcu
cpu/avr: Added "AVRDUDE_MCU" configuration parameter.
2013-05-19 17:35:26 -07:00
Robert Quattlebaum 9c70e0e5cc native/net/tapdev: Fix for new UIP_CONF_IPV6 handling. 2013-05-19 17:27:30 -07:00
Robert Quattlebaum 674f70b6c3 cpu/avr: Added "AVRDUDE_MCU" configuration parameter. 2013-05-19 14:23:31 -07:00
Adam Dunkels aaac20a950 Merge pull request #225 from tecip-nes/pic32_minor_reorganization
Pic32 minor reorganization
2013-05-19 14:22:14 -07:00
Robert Quattlebaum 3e0666265d avr-ravenusb/cdc_task: Fix compile issues.
A lot more changes are in the pipeline, but compiling is a good start.
2013-05-19 11:31:01 -07:00
Robert Quattlebaum 92b4f5fe59 platform/econotag: Allow RPL and Router settings to be overridden. 2013-05-19 08:21:18 -07:00
Robert Quattlebaum 9c17a542a7 avr/bootloader.c: Now compatible with bootloaders which always run first.
The boot loader now knows when to go into bootstrap mode by
looking for a specific EEPROM value. Also updated code style
to match Contiki code style guidelines.
2013-05-19 08:21:16 -07:00
Mariano Alvira 5df586e09d Merge pull request #184 from g-oikonomou/bug-fixes/rimestats
Rimestats Fix (#183)
2013-05-19 07:45:22 -07:00
Mariano Alvira 26d81d85a1 Merge pull request #228 from g-oikonomou/bug-fixes/uip-conf-ipv6
Fix 8051 port builds to play nicely with #173
2013-05-18 15:36:59 -07:00
Robert Quattlebaum 535e90343c Merge pull request #144 from darconeous/pull-requests/settings-for-all-targets
core/lib/settings: Generalized settings manager to work on any platform
2013-05-18 12:03:09 -07:00
Robert Quattlebaum b8c0f2de6c cpu/native: Add file-backed simulated EEPROM to native cpu.
This patch removes a defunct EEPROM implementation from the native
platform and provides a new EEPROM implementation for the native cpu.
The previous implementation appears to be vestigal.

This is useful for testing code which uses the EEPROM without running
the code on the actual hardware.

By default the code will create a new temporary file as the EEPROM
backing, reinitializing each time. If you would like to preserve the
EEPROM contents or specify a specific EEPROM file to use, you can set the
`CONTIKI_EEPROM` environment variable to the name of the EEPROM file you
wish to use instead. If it already exists, its contents will be used.
If it does not already exist, it will be created and initialized by
filling it with `0xFF`---just like a real EEPROM.

A new example is also included, which was used to verify the correctness
of the implementation. It can easily be used to verify the EEPROM
implementations of other targets.
2013-05-18 10:29:41 -07:00
George Oikonomou 13e29c7975 Fix 8051 port builds to play nicely with #173 2013-05-17 23:41:36 +01:00
Giovanni evilaliv3 Pellerano 49d861979b remote power switch example updated to use coap version 13 2013-05-17 14:45:13 +02:00
Giovanni evilaliv3 Pellerano c33d51e762 pic32 minor cleanups 2013-05-17 14:32:39 +02:00
Adam Dunkels 59a8df14a8 Merge pull request #189 from sieben/markdown
Update to markdown
2013-05-16 00:24:25 -07:00
François Revol 95eb505345 win32: Fix cygwin build
size_t is declared in sys/types.h
2013-04-20 14:44:27 +02:00
George Oikonomou 8b5b2bd4d8 CC2538 Documentation typo and grammar fixes 2013-04-17 15:41:41 +01:00
George Oikonomou 007e113ea9 Improve handling of CDC ACM line state
- For the CC2538, simplify handling of USB_CDC_ACM_LINE_STATE
  events. Ignore the Carrier Control (RTS) bit when receiving
  a SET_CONTROL_LINE _STATE request, we are a full duplex device.
- Improve behaviour of the CC2531 USB stick when there is no
  process on the host to read IN data. Basically, we adopt the
  CC2538 approach and we only send data when a DTE is present
2013-04-16 15:49:05 +01:00
George Oikonomou 40f49948e6 New Platform: TI CC2538 Development Kit
This commit adds cpu, platform and example files,
providing support for running Contiki on TI's cc2538 DK
2013-04-06 21:07:31 +01:00
Rémy Léone 69d936d94a Update README.md
Minor markdown => md renaming
2013-04-03 14:52:27 +03:00
Oliver Schmidt d5d8de7372 Merge pull request #181 from mmuman/ctk-ncurses-try4
TODOs:
- Check FreeBSD
- Adjust Makefile.target
2013-03-31 14:36:30 -07:00
François Revol 476be8de7e ctk-curses: style fixes
Thanks tools/contiki-indent
2013-03-31 04:07:03 +02:00
François Revol 3633c52bcb ctk-curses: whitespace fixes 2013-03-30 23:34:18 +01:00
François Revol a03334a59d ctk-curses: style fixes 2013-03-30 23:26:22 +01:00
François Revol 8daf2b6659 ctk-curses: remove unused code
The setupterm() call is not needed when using curses.
2013-03-30 23:15:08 +01:00
François Revol 976746f97f ctk-curses: cleanup 2013-03-30 23:07:38 +01:00
François Revol 5a4382a996 ctk-curses: uncomment refresh() calls
I'm not yet sure they are required there but it shouldn't hurt.
2013-03-30 23:03:04 +01:00
François Revol 065c25cfc5 ctk-curses: uncomment nonl() call and fix return key handling 2013-03-30 23:00:44 +01:00
François Revol f63aada8b6 ctk-curses: make sure gcc finds ncurses headers on cygwin
They are located in /usr/include/ncurses
2013-03-30 18:11:17 +01:00
François Revol 45662ac1ef ctk-curses: add some comments for clarity 2013-03-30 17:57:01 +01:00
Rémy Léone e6bd4f1dde Rename to md 2013-03-26 23:15:37 +01:00
Rémy Léone 7b40a568a6 Update to markdown
- Spellchecking
- Update plain text to github markdown
2013-03-26 16:55:19 +01:00
François Revol 9372a153dd win32: Prefix color names with CTK_
For consistency with ctk-curses, prefix CTK colors with CTK_.

Also introduce COLOR_BG to make it easier to change the widgets
background at once.
2013-03-26 11:51:58 +01:00
François Revol ada305a3be ctk-curses: Introduce CTK-specific color names
Since ncurses also defines COLOR_BLACK and friends, and we want
to avoid including curses.h in contiki-conf.h, define CTK_COLOR_*
constants and map them to curses colors in ctk-curses.c.
2013-03-26 11:37:10 +01:00
François Revol 56f11e7524 ctk-curses: C89
At least Haiku still uses gcc2 by default.
2013-03-26 08:51:37 +01:00
François Revol 54199d7121 ctk-curses: add CURSES_LIB to TARGET_LIBFILES, not LDFLAGS
It seems TARGET_LIBFILES is used at the end of the link command,
unlike LDFLAGS, which should help when only a static curses lib is
available, like on Haiku.
2013-03-26 08:10:59 +01:00
Nicolas Tsiftes f8edbbb8d2 Merge pull request #178 from adamdunkels/feature-contiki-default-conf
A first stab at a default configuration system
2013-03-25 20:13:15 -07:00
François Revol 2bb9ced3d6 ctk-curses: Guard ncurses-specific mouse function calls
The mouse support is ncurses-specific so guard it with proper #ifdef.
2013-03-26 02:01:28 +01:00
François Revol 86cb1769f6 ctk-curses: Remove extra mouse events pumping loop
It was added to avoid getting garbage keyboard input in some cases,
however it seems not to happen very often and might be the cause
of hang in OSX. If garbage input happens again we can always try
to pump a single event each time instead of looping anyway.
2013-03-26 01:49:05 +01:00
François Revol 343a7643b7 ctk-curses: Introduce CURSES_LIB makefile variable
This should allow overriding it depending on $(HOST_OS).
2013-03-26 01:12:09 +01:00
George Oikonomou 8c0cf50dca Rename RIMESTATS_CONF_ON to RIMESTATS_CONF_ENABLED 2013-03-20 21:14:34 +00:00
Robert Quattlebaum 28a1e40ebd core/lib/settings: Generalized Settings Manager to work on any platform
This commit moves the Settings Manager from the AVR codebase
into the Contiki core library. Any platform that implements
the Contiki EEPROM API can now use the Settings Manager's
key-value store for storing their persistent configuration info.

The Settings Manager is a EEPROM-based key-value store. Keys
are 16-bit integers and values may be up to 16,383 bytes long.
It is intended to be used to store configuration-related information,
like network settings, radio channels, etc.

 * Robust data format which requires no initialization.
 * Supports multiple values with the same key.
 * Data can be appended without erasing EEPROM.
 * Max size of settings data can be easily increased in the future,
   as long as it doesn't overlap with application data.

The format was inspired by the [OLPC manufacturing data format][].

Since the beginning of EEPROM often contains application-specific
information, the best place to store settings is at the end of EEPROM
(the "top"). Because we are starting at the end of EEPROM, it makes
sense to grow the list of key-value pairs downward, toward the start of
EEPROM.

Each key-value pair is stored in memory in the following format:

Order    | Size     | Name         | Description
--------:|---------:|--------------|-------------------------------
       0 |        2 | `key`        | 16-bit key
      -2 |        1 | `size_check` | One's-complement of next byte
      -3 |   1 or 2 | `size`       | The size of `value`, in bytes
-4 or -5 | variable | `value`      | Value associated with `key`

The end of the key-value pairs is denoted by the first invalid entry.
An invalid entry has any of the following attributes:

 * The `size_check` byte doesn't match the one's compliment of the
   `size` byte (or `size_low` byte).
 * The key has a value of 0x0000.

[OLPC manufacturing data format]: http://wiki.laptop.org/go/Manufacturing_data
2013-03-20 11:57:13 -07:00
François Revol b7601c3acb ctk-curses: Cleanup 2013-03-20 17:16:37 +01:00
Oliver Schmidt 6ba28bf74f Merge pull request #180 from mmuman/cleanup-and-fixes
Cleanup and fixes
2013-03-20 02:37:24 -07:00
François Revol 1ce1232d0f ctk-curses: Add configuration for various apps 2013-03-20 02:01:05 +01:00
François Revol 06d3c14213 ctk-curses: Enable screensaver 2013-03-20 02:01:05 +01:00
François Revol 1c5d6a9db7 ctk-curses: Cleanup + fixes
* Cleanup
* Fix warnings
* Fix indentation
* Only wait 1ms for keyboard timeout
* Hide text cursor
* Pump mouse events just in case
* Add F9 as menu key since F10 is used as menu trigger by Gnome
2013-03-20 02:00:32 +01:00
François Revol db982f7b82 ctk-curses: Add mouse support to the ncurses CTK backend. 2013-03-20 01:35:42 +01:00
François Revol 25e3f828aa Ncurses-based CTK backend for the native platform. 2013-03-20 01:35:01 +01:00
François Revol 3d33248eff native: Fix trailing whitespace 2013-03-19 20:00:26 +01:00
François Revol 877b059bc7 native: Use stderr for logging
Since we will hopefully one day use stdout as a CTK display,
use stderr instead for log output, which can be redirected to a file.
2013-03-19 19:24:59 +01:00
Adam Dunkels a5046e83c7 Cleanup and refactoring of the STM32w port
This is a general cleanup of things like code style issues and code structure of the STM32w port to make it more like the rest of Contiki is structured.
2013-03-18 13:31:26 +01:00
Adam Dunkels 277a348f60 Changed the name of the IPv6 number of route entries configuration from UIP_CONF_DS6_ROUTE_NBU to UIP_CONF_MAX_ROUTES. 2013-03-18 11:12:44 +01:00
Oliver Schmidt a0e2120fdb Added configurations of the new resolver. 2013-03-14 23:17:59 +01:00
Oliver Schmidt bbc26ef489 Added support for strncasecmp() which is now used in resolv.c. 2013-03-13 14:43:05 +01:00
Adam Dunkels 0841bce833 Merge pull request #82 from darconeous/master
Makefiles: Allow setting UIP_CONF_IPV6=0 to work as expected.
2013-03-10 12:51:03 -07:00
Adam Dunkels c7ef7198a8 Merge pull request #85 from darconeous/native-target-osx
Various updates to the minimal-net platform.
2013-03-10 12:48:07 -07:00
Adam Dunkels 9c8f1d5356 Merge pull request #137 from darconeous/pull-requests/platform-avr-ravenusb-httpd-isused-fix
Fix for avr-ravenusb target builds due to missing 'isused'.
2013-03-09 06:24:46 -08:00
Oliver Schmidt 8e05c80d96 Merge pull request #151 from oliverschmidt/master
Reorganized web page attribute data handling.
2013-03-06 07:34:07 -08:00
Oliver Schmidt c7b8bac006 Reorganized web page attribute data handling.
- Up to now the web browser used several fixed size arrays to hold the various types attribute data of the web page. This turned out to be way to inflexible for any non-trivial web page. Therefore now all attribute data is stored in a single buffer one after the other as they arrive from the parser only occupying the memory actually needed. This allows for pages with many links with rather short URLs as well as pages with few link with long URLs as well as pages with several simple forms as well as pages with one form with many form inputs.

- Using the actual web page buffer to hold the text buffers of text entry fields was in general a cool idea but in reality it  is often necessary to enter text longer than the size of the text entry field. Therefore the text buffer is now stored in the new unified attribute data buffer.

- Splitting up the process of canonicalizing a link URL and actually navigating to the resulting URL allowed to get rid of the 'tmpurl' buffer used during form submit. Now the form action is canonicalized like a usual link, then the form input name/value pairs are written right into the 'url' buffer and afterwards the navigation is triggered.

- Support for the 'render states' was completely removed. The only actually supported render state was centered output. The new unified attribute buffer would have complicated enumerating all widgets added to the page in order to adjust their position. Therefore I decided to drop the whole feature as the <center> tag is barely used anymore and newer center attributes are to hard to parse.
2013-03-06 16:29:36 +01:00
Oliver Schmidt cdb16c02fa Removed web browser settings that aren't actually different from the defaults. 2013-03-06 15:17:39 +01:00
Oliver Schmidt 830b500a7d Merge pull request #149 from oliverschmidt/master
Finetuned Language Card usage.
2013-03-06 05:58:14 -08:00
Oliver Schmidt 65ad87422f Finetuned Language Card usage.
Both the source code and the cc65 compiler have changed. So it made sense to review which object files are to be compiled for placement in the Language Card.
2013-03-06 14:57:24 +01:00
Mariano Alvira ab8fe95864 Revert "Merge pull request #120 from Jeff-Ciesielski/stm32_cl"
This reverts commit 029bc0ee27, reversing
changes made to a7b3e99644.

This uses LGPL libopencm3. While the patch doesn't include the code,
the resulting binary would force the release of all code as LGPL.
2013-03-02 08:11:28 -05:00
Robert Quattlebaum d454a7ca96 httpd-simple-avr: 'isused' seems to not be used anymore. 2013-02-28 22:08:28 -08:00
Nicolas Tsiftes b3de9a05e7 Merge pull request #141 from cmorty/sky_MOTEID_missing_brace
Add missing brace in sky Makefile
2013-02-24 15:27:23 -08:00
Mariano Alvira 029bc0ee27 Merge pull request #120 from Jeff-Ciesielski/stm32_cl
Add initial support for STM32F1x Connectivity Line devices
2013-02-24 15:08:57 -08:00
Moritz 'Morty' Strübe 955fbc3c5a Add missing brace in sky Makefile 2013-02-20 19:50:29 +01:00
Nicolas Tsiftes a7b3e99644 Merge pull request #91 from JelmerT/z1-mac
Added support for motelist and uploading to Z1 motes under Mac OSX
2013-02-17 09:28:49 -08:00
Nicolas Tsiftes ebacb91e57 Merge pull request #98 from JelmerT/hotfix-z1-i2cmaster
Bugfix z1 i2cmaster
2013-02-17 09:21:18 -08:00
Oliver Schmidt 010d495e03 loader.system is now official part of the cc65 Apple II support. 2013-02-17 00:30:55 +01:00
Oliver Schmidt 98060c1eab Moved from last cc65 release (2.13.3) to recent cc65 snapshot (2.13.9).
Relevant cc65 changes...

General:
- The compiler generates "extended" dependency info (like gcc) so there's no need for postprocessing whatsoever :-)
- The linker is very pernickety regarding the ordering of cmdline options so a custom linker rule is necessary :-(

Apple2:
- The various memory usage scenarios aren't specified anymore via separate linker configs but via defines overriding default values in the builtin linker config.

Atari:
- The builtin linker config allows to override the start addr so there no more need for a custom linker config.
- The C library comes with POSIX directory access. So there's no more need for for a custom coding.

CBM:
- The C library comes with POSIX directory access. So there's no more need for for a custom coding.
2013-02-14 15:42:43 +01:00
Oliver Schmidt 19c8f9ffdd Merge pull request #122 from oliverschmidt/master
There's no point in ctk_restore() for standalone GUI builds.
2013-02-09 12:50:37 -08:00
Oliver Schmidt 45c44e23d7 There's no point in ctk_restore() for standalone GUI builds. 2013-02-09 21:49:00 +01:00
Oliver Schmidt c7f986faf5 Merge pull request #121 from oliverschmidt/master
Several minor adjustments.
2013-02-08 17:04:04 -08:00
Oliver Schmidt 21b8be3798 Use plain ASCII chars for lines on Win32 console CTK. 2013-02-09 02:02:46 +01:00
Oliver Schmidt b1eeaf31c9 Fixed Win32 'platform build'. 2013-02-09 02:00:35 +01:00
Jeff Ciesielski 222f93f023 stm32f107_basic: Add support for a simple stm32f107 platform
This platform is a basic waveshare stm32f107 devkit which contains a
USART, USB device port, some buttons and some LEDs.  Unfortunately not
enough to bring up networking, but enough to test building and a
simple contiki shell
2013-02-06 15:43:25 -08:00
Mariano Alvira 299d8c6cbf set the pin defaults properly to reduce current consumption on
sleeping M12s.
2013-02-03 15:15:11 -05:00
Mariano Alvira fb8bbf37cf Use the RTC only as the main timer.
This is a major change to how the main tick interrupt is handled on
the mc1322x platforms. Instead of using two timer resources, TMR0 and
RTC, this patch unifies all the timers to use the RTC. This is enabled by
implementing etimers as scheduled rtimers. The main advantage (aside
from freeing TMR0 for general use) is have the Contiki timebase come
from the same source that will be used for sleeping and wakeup.
2013-02-03 15:15:05 -05:00
Robert Quattlebaum 0ca8a57f39 platform/minimal-net: Print out pseudo LED status. 2013-01-30 09:18:40 -08:00
Robert Quattlebaum a571b663b0 platform/minimal-net: Better, more seamless support for OS X.
This patch enables automatic route setup and cleanup when
starting and stopping the minimal-net target on OS X.

Both IPv4 and IPv6 are supported.

Using the minimal-net target on OS X was absolute hell
before I came up with this patch. Now it is painless.
2013-01-30 09:17:30 -08:00
Robert Quattlebaum 092b6f3baa platform/minimal-net: Implement better idle behavior.
The minimal-net target, as currently written, wakes up the
CPU every millisecond to check for packets, and will only
react in real-time to input from stdin. If you are running
this on a laptop battery, your battery will quickly drain.

This change allows the CPU to idle when there is literally
nothing to do while still being responsive to input from
stein and/or incoming packets. This fix should significantly
improve performance while significantly improving power
usage. Win-win.

Also added `_xassert()` implementation so that the contiki-
provided `assert()` macro will work properly when used
on this platform.
2013-01-30 09:17:29 -08:00
Jelmer Tiete f4976140fc fixed z1 i2c bug where 2 extra bytes were read with every i2c-receive 2013-01-30 14:23:07 +01:00
Jelmer Tiete 12dd138915 fixed z1 i2c bug where 2 extra bytes were read with every i2c-receive 2013-01-30 14:15:16 +01:00
Jelmer Tiete edf4e36094 removed tag from z1 Makefile.common 2013-01-30 11:13:19 +01:00
Oliver Schmidt e88997b71c Minor README updates. 2013-01-29 22:44:37 +01:00
Oliver Schmidt 1a5e20bc5f Remove tab chars from retro C sources. 2013-01-28 23:43:08 +01:00
Jelmer Tiete 7ce2688d84 Added support for motelist and uploading to Z1 motes under Mac OSX 2013-01-23 22:56:43 +01:00
Robert Quattlebaum 5afcbf6fff Makefiles: Allow setting UIP_CONF_IPV6=0 to work as expected.
Setting UIP_CONF_IPV6 to zero from the make build command line is
something that seems like it should ensure that IPv6 is disabled, but in
fact it actually *enables* IPv6. This seems counter intuitive, so this
patch changes the behavior of the makefiles to handle this case
properly.
2013-01-14 22:03:42 -08:00
Giovanni `evilaliv3` Pellerano ee556dcf14 minor corrections to adhere contiki code style guidelines 2012-12-21 12:36:29 +01:00
Giovanni `evilaliv3` Pellerano fdd380e7ca added support for SEED-EYE board (http://rtn.sssup.it/index.php/hardware/seed-eye) 2012-12-20 23:57:47 +01:00
George Oikonomou f5bc1c92ba Update to the new ds6_route API 2012-12-16 19:28:56 +00:00
George Oikonomou 351a4d39b9 Code style fixes: cc2530dk 2012-12-16 19:28:56 +00:00
George Oikonomou b4bb51e811 Code style fixes: sensinode 2012-12-16 19:28:55 +00:00
Moritz 'Morty' Strübe 79aa5dbc01 Get rid of generc ihex-file to allow parallel uploads 2012-12-11 12:40:38 +01:00
Moritz 'Morty' Strübe 7213d36d63 Support MOTEIDS for flashing, etc 2012-12-11 12:40:24 +01:00
Adam Dunkels aaa950ab17 Cooja platform changes to get IPv6/RPL to work better 2012-12-10 01:50:32 +01:00
Adam Dunkels 99f541e8fd Updated to the latest uip-ds6-route API 2012-11-27 23:04:34 +01:00
Adam Dunkels 91206e2249 Avoid multiple definitions of NETSTACK_CONF_MAC. Turn on RPL by default. 2012-11-21 20:11:22 +01:00
Adam Dunkels e178787999 Fixed compilation problems on the micaz and exp5438 platforms due to the node-id change 2012-11-20 21:16:50 +01:00
Adam Dunkels ec8c7e9be0 Cleanup of the node-id.h files. The node-id.h file contains
declarations of functions for setting and getting a node ID number, a
functionality that exists on many platforms. Since this functionality
was not considered part of the Contiki core, each platform defined its
own node-id.h file. This commit attempts to clean this up by
collecting the node-id.h into a core/sys/node-id.h file that replaces
the old node-id.h files from the platform directories.
2012-11-20 19:59:46 +01:00
Mariano Alvira 03ab3fe317 Newer and cleaner TARGET=econotag as well as robust mc13224v
configuration system.

(also deprecate TARGET=redbee-econotag)

- mc13224v now automatically probes hardware config for buck converter
and 32kHz crystal as well as automatically monitors battery voltage
and manages the buck accordingly.

- new flashed based config system for mc13224v parameters such has
  radio modes (demod, autoack), nvmtype, mac address, channel and
  power.

- considerably cleaned up econotag platform code (suffered from severe
  case of bit-rot)
2012-11-19 19:16:29 -05:00
Mariano Alvira 2c9a538582 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into bump-libmc1322x
bump libmc1322x to 7bee48243c

Conflicts:
	cpu/mc1322x/board/Makefile.board
	cpu/mc1322x/lib/include/uart.h
	cpu/mc1322x/lib/uart1.c
	cpu/mc1322x/lib/uart2.c
	cpu/mc1322x/src/default_lowlevel.c
2012-11-18 18:27:39 -05:00
Etienne Duble 97da754b1c Fixed login make target repeated in Makefile.mbxxx and Makefile.stm32w108 2012-11-09 15:43:15 +01:00
George Oikonomou 5399fa2b6f cc2530dk: Fixed the startup text for dongle builds
See Pull Request #21
2012-11-04 21:44:34 +00:00
George Oikonomou 53fdb96816 cc2530dk and Sensinode: Local copy of uip-debug.c
Copied this file to the platform directories and
changed it to use putstring(), puthex() etc so
that we can print addresses without linking in
printf

See Pull Request #20
2012-11-04 21:43:57 +00:00