deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
7247 commits 6 branches 13 tags 80 MiB
Commit graph

1742 commits

Author SHA1 Message Date
adamdunkels
34cba78ca8 Bugfix: bump advertisements only when a parent changes, not because of an upstream parent change 2010-10-19 07:34:29 +00:00
nifi
e2b4956a7f Bug fix: release the packet and notify the sender if RDC returned an error 2010-10-14 19:08:39 +00:00
oliverschmidt
2f89e69ff7 Fixed build for platforms which use the default value for QUEUEBUF_NUM. 2010-10-12 19:51:28 +00:00
adamdunkels
020da4e8ba Added a function for obtaining beacon intervals 2010-10-11 23:44:24 +00:00
adamdunkels
ec716ea62d Do not reduce transmission interval, unless explicitly told so with the bump flag 2010-10-11 23:43:01 +00:00
adamdunkels
37adf130b4 Rewrite of the congestion logic. A node now report it being congested 
when half the transmission queue is full. When a neighbor is heard to
be congested, the rtmetric of that node is inflated to avoid sending
more traffic in its direction.

Fixed problems with beacon intervals: intervals are now not reduced
when a path gets significantly worse, only when they get better.
 2010-10-11 23:42:01 +00:00
adamdunkels
d821ba5e22 Added a lifetime for link estimates: if they are too old, they are 
reset so that a new probing period can produce more up-to-date
estimates. Added a congestion mechanism whereby a neighbor can be
marked as being congested for a period of time, during which the ETX
for the neighbor will be artificially inflated.
 2010-10-11 23:38:46 +00:00
adamdunkels
5eb4a0fe8d Rewrote the initial link estimate logic: link estimates are now 
computed only over the actual samples, not over the entire
buffer. Also, the initial link estimate is much more conservative now
(16 transmissions) to favor links that have been probed, and which
therefore are likely to have better ETXs.
 2010-10-11 23:34:02 +00:00
adamdunkels
0cabe483c3 Don't call sink recv function for zero-size packets, since these most likely are link estimate probes or keepalive packets. Explicitly set eseqno to zero when opening a new connection. 2010-10-07 15:52:28 +00:00
adamdunkels
ad35c54473 Bugfix: when a node's rtmetric was lower than SIGNIFICANT_RTMETRIC_PARENT_CHANGE, its beacon timers would always be bumped to its lowest value 2010-10-05 20:06:47 +00:00
adamdunkels
52e9a6f1fb Turned the DRAW_TREE debug flag off by default 2010-10-04 22:36:47 +00:00
adamdunkels
65d640ac53 Several bugfixes to the proactive link estimate maintenance code, which is now enabled by default. Simplified DRAW_TREE code for drawing routing graph in Cooja. Added routing metric penalty to parents that are congested or that drop packets. 2010-10-04 20:27:50 +00:00
adamdunkels
212e73faa6 Removed old netsim code. Added a function for obtaining the packet attributes of a queuebuf packet. 2010-10-04 20:26:01 +00:00
joxe
4f3fc1c404 fixed xmac to use new channel check define name 2010-10-03 22:46:53 +00:00
adamdunkels
ceebd7020a Bugfix: the return value sometimes was wrong when a collision was detected. 2010-10-03 20:39:24 +00:00
adamdunkels
ae88ed04f1 Moved the definition of the channel check rate used by the radio duty 
cycling layer. This definition was previously held in net/mac/mac.h,
with the name MAC_CONF_CHANNEL_CHECK_RATE. But since the rate is used
by the radio duty cycling layer, it makes more sense to change its
name to reflect this. Also, the configuration option should be tied to
the netstack configuration instead.

So the new configuration option is called
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE.
 2010-10-03 20:37:32 +00:00
adamdunkels
40583fe112 Removed the polite announcement code, since it was not used, and enabled the broadcast announcement code by default. Increased the default intervals for broadcast announcements. 2010-10-03 20:10:22 +00:00
adamdunkels
605392522f Bugfixes and improvements: rtmetrics are now 16-bit clean. Added experimental feature that proactively probes neighbors that have not yet been tried out, in order to get an initial ETX for them. 2010-10-03 20:08:44 +00:00
adamdunkels
d0579c8a81 Cleaned up the collect neighbor management code 2010-10-03 20:07:10 +00:00
adamdunkels
b23a364397 rtmetric values should always be computed as 16-bit values 2010-10-03 20:06:25 +00:00
nvt-se
909569f834 Must check if load_file succeeded 2010-10-01 20:14:14 +00:00
adamdunkels
32ba90ea4c Bugfix: make sure that neighbor exists before attempting to update tx 
count.
 2010-09-28 06:53:02 +00:00
joxe
77c5187a2e fixed bug where context is null but still referenced 2010-09-23 19:57:50 +00:00
joxe
494d2a3073 only compare with global addresses when selecting source for a specific destination 2010-09-23 18:17:27 +00:00
nifi
e242fb28bf Reverted radio API change in CC2420 (not yet fully integrated with Contiki core) 2010-09-23 08:26:06 +00:00
adamdunkels
eed22a6f3c A number of changes to the collect code: 
* Added an optional "keep alive" mechanism whereby an idle network is
periodically probed by dummy packets to maintain a recent quality
metric when there is no traffic.
* Bugfix in when new routing metrics should be advertised
* Rewrote the ACK logic so that a queuebuf is not allocated for each
ack, only for those acks generated by the sink node.
* Updated the wrap-around logic for sequence numbers: when a sequence
number wraps, it won't go back to 0. Instead, it wraps to 128. This
allows us to understand when a node has rebooted: when its seqno is <
128, it has recently rebooted.
 2010-09-22 22:08:08 +00:00
adamdunkels
2cae71e89b Added a function for obtaining the link estimate and rtmetric for a neighbor 2010-09-22 22:04:55 +00:00
adamdunkels
46b2451969 Made the initial link estimate explicit 2010-09-22 22:03:21 +00:00
adamdunkels
40ee35e8c8 Rewrote all busy waits with a new macro, which has a built-in timeout to ensure that busy waits won't hang the CPU 2010-09-22 22:01:53 +00:00
joxe
1dc5366b15 fixed buggy comment 2010-09-21 13:15:25 +00:00
joxe
f1d19a5f9a no callback to rpl if rpl is not used 2010-09-21 13:13:09 +00:00
joxe
63ab1ffce0 clear default route when neighbour is removed 2010-09-20 15:30:12 +00:00
nvt-se
58db04ee64 Set a high penalty for packet losses. 2010-09-15 15:59:52 +00:00
nvt-se
098f4001e0 Use fixed point arithmetic in the calculations of the ETX EWMA 2010-09-15 15:10:25 +00:00
nvt-se
adf6961a85 Various bug fixes and adjustments for rpl-11 2010-09-15 13:22:22 +00:00
dak664
b9a9e7695d Add option to remove process name strings to save RAM 2010-09-14 18:55:04 +00:00
adamdunkels
18e31f33b9 Minor tweaks. Removed debug output from CVS. 2010-09-14 06:48:36 +00:00
nifi
095f700b63 Moved down inclusion of rtimer-arch.h to allow rtimer_clock_t to be used in rtimer-arch.h 2010-09-13 20:46:02 +00:00
adamdunkels
eb58968459 Added a timer to each phase structure that keeps track of for how long 
a particular receiver has not ACKed packets. After some time
(currently 16 seconds), the sender will begin sending full strobe
periods again.
 2010-09-13 13:39:05 +00:00
adamdunkels
3ae774c91a Added a way to for specifying lists as parts of structs. These lists 
must be initialized with a special LIST_STRUCT_INIT() call before
using.
 2010-09-13 13:31:00 +00:00
adamdunkels
591766e663 Significant improvements to the Collect protocol: 
* Loop detection and untangling. Now uses in-band loop detection that
  works.

* Link quality estimation. Now starts with a conservative /
  pessimistic estimate for new links.

* Retransmissions. MAC layer and network layer retransmissions are now
  decoupled.

* Loss handling. Deals better with losses now.

* Concurrent applications. Each connection now maintains its own
  neighbor table with separated cost to sink estimates for each
  connection.
 2010-09-13 13:28:14 +00:00
oliverschmidt
a0b8927777 Allow to exit the process owning the foreground window by pressing ctrl-c. This is especially useful if there's no closebutton on the window frames (or no windows at all). 2010-09-09 20:21:26 +00:00
adamdunkels
4e0744954a Rewrite of important parts of the Collect logic: link estimation 
calculation and parent selection.  This fixes a severe bug that caused
loops when packets were erroneously retransmitted due to ACK loss.
 2010-09-08 19:21:45 +00:00
nifi
f05952c926 Changed packet id to use 8 bit instead of 4 bit 2010-08-31 13:14:49 +00:00
nifi
d06a1ecc0c corrected include path 2010-08-25 18:35:52 +00:00
dak664
12479c32bc Fix compiler warnings 2010-08-01 21:18:07 +00:00
oliverschmidt
89f6235c13 Using wherex() to determine the length of the string printed with cputsn() fails if the right edge of the screen was reached as wherex() then returns 0. 
Therefore we rather count the chars actually printed in cputsn() and return that value thus avoiding usage of wherex() in those scenarios altogether.
 2010-07-20 22:19:23 +00:00
nvt-se
11760059d3 The second predicate is not needed. 2010-07-03 23:52:02 +00:00
nifi
3e6113be72 removed debug output 2010-06-30 09:03:20 +00:00
nvt-se
007d4a4001 Improved logic for processing DIOs 2010-06-28 14:51:23 +00:00
nifi
c44cf73e4f Adapted to new SPI and CC2420 naming 2010-06-24 11:25:55 +00:00
nifi
f609cb0f7c Added macro to read from CC2420 RAM 2010-06-24 11:25:07 +00:00
nifi
30db4eff52 Made QUEUEBUF_STATS configurable 2010-06-24 09:48:21 +00:00
nifi
49a2ca6b1e Fixed naming of CC2420 macros 2010-06-24 09:28:38 +00:00
nifi
fb3c2e75cf removed obsolete definitions 2010-06-24 09:28:12 +00:00
nifi
c6b6b6625c removed obsolete header file for CC2420 2010-06-24 09:20:28 +00:00
joxe
f7a82a9145 split SPI code into generic and CC2420-related and renamed constants in CC2420 2010-06-23 10:15:28 +00:00
joxe
bc398ca546 removed platform dependent loop-count from cc2420 - moved to platform config instead 2010-06-21 19:48:00 +00:00
joxe
a5d7b197eb added support for the Z1 platform and its 8Mhz 2010-06-21 19:09:35 +00:00
joxe
1f0a43bf01 fixed timer bug - did not do equality comparison 2010-06-21 19:07:24 +00:00
joxe
546504516b changed timer comparison to avoid crashing mspgcc4 2010-06-21 09:41:49 +00:00
nifi
e965b74cf5 added missing include 2010-06-18 08:28:56 +00:00
nifi
4741b95858 added missing include 2010-06-16 10:10:10 +00:00
nifi
21828ad782 Changed the retransmission time to be based on the configured MAC channel check rate when the RDC has no channel check interval. 2010-06-16 10:08:30 +00:00
adamdunkels
7647cbd8aa Use the list_item_next() API 2010-06-15 19:22:25 +00:00
adamdunkels
560c84a2fe Added a function for getting the first global IPv6 address 2010-06-15 19:16:22 +00:00
adamdunkels
a84cc7c8a0 Added a function for obtaining the next item on the list. This makes list iterations nicer, as the ->next pointer now is hidden within the list abstraction. 2010-06-15 18:54:27 +00:00
nifi
01b1359b1f removed unused (and slightly problematic) code 2010-06-15 14:19:22 +00:00
nifi
46f9f7e6c0 corrected include path 2010-06-15 13:31:22 +00:00
adamdunkels
3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
adamdunkels
951fd78f6c ctimer moved from net/rime to sys/ 2010-06-14 18:58:45 +00:00
nvt-se
fad2b1def9 Clarified the function naming for neighbor information callbacks - names now indicate where the information is from. 2010-06-14 18:35:04 +00:00
nifi
adc38568ad Minor optimization: replaced init loops with memset to reduce code size 2010-06-14 13:51:13 +00:00
nifi
7499939c94 removed debug output 2010-06-14 13:07:09 +00:00
nvt-se
e000b1abf3 A major update to ContikiRPL resulting in a reduced code footprint by 
300 bytes, as well as cleaner protocol logic.

* Made parent management uniform.

* Simplified the DIO processing.

* Improved the Objective Function API and its documentation.

* Removed redundant code at various places.

* Improved identifier naming.

* Switched visualization from candidate parents to preferred parents only.

* Made DAO ACK transmissions configurable.

* Improved initial ETX guess by using a cached local confidence value.

* Added a periodical rank recalculation function to reduce
  the maximum stack depth.

* Increased the Trickle redundancy constant to ensure faster
  topological updates.
 2010-06-14 12:44:37 +00:00
adamdunkels
a890cd3d49 Moved ctimer.[ch] from their old and illogical location in core/net/rime to a more appropriate place in core/sys 2010-06-14 11:33:58 +00:00
adamdunkels
97708d6235 Documentation group set accordingly 2010-06-14 07:35:53 +00:00
adamdunkels
8f8393aadc Moved ctimer.[ch] from their old and illogical location in core/net/rime to a more appropriate place in core/sys 2010-06-14 07:34:36 +00:00
adamdunkels
baa62e9314 Addresses are not const 2010-06-14 06:55:26 +00:00
adamdunkels
2647f879c2 Bugfix: select the best parent if current parent is NULL 2010-06-14 06:54:47 +00:00
adamdunkels
8d1680fed5 Filter duplicate packets 2010-06-14 06:52:41 +00:00
adamdunkels
a6bd51f361 If a packet is lost due to NOACK or TXERR, we count the number of transmissions and we add an additional loss penalty (currently one) 2010-06-14 06:51:58 +00:00
joxe
1095997b66 made DIOs and OCP 09 compliant 2010-06-12 10:55:46 +00:00
nvt-se
75b624eb71 Refactored the code, removed void pointer arithmetic, and fixed invalid list removal after freeing of memb object. 2010-06-11 12:32:48 +00:00
nvt-se
8a43743a42 Updated declaration for rpl_alloc_dag. 2010-06-08 21:41:02 +00:00
nvt-se
b1521e4950 Check correctly if a DAG already exists in the same instance. 2010-06-08 21:37:22 +00:00
adamdunkels
296c828ac2 Removed instant reaction to packet loss. Previously, a neighbor was dropped if no MAC layer ack was received. 2010-06-08 19:25:40 +00:00
nvt-se
4a08f545c9 Make the distinction between incoming and outgoing DTSN clear. 2010-06-08 16:21:54 +00:00
nvt-se
b8848f29eb Replaced invalid attempt to switch preferred parent when its DS6 neighbor entry got purged. 2010-06-08 15:40:50 +00:00
nvt-se
4e61d69a49 Removed redundant code, moved the control of acceptable rank increases into a separate function. 2010-06-07 14:01:22 +00:00
nvt-se
c6c6760838 Validate incoming DTSN value 2010-06-07 13:40:05 +00:00
nvt-se
e5fd1f47fa Copy the DTSN from the DIO when joining a DAG. 2010-06-07 11:36:02 +00:00
nvt-se
f0afbb69ab Fixed typo 2010-06-06 21:48:15 +00:00
nvt-se
3748f782c5 Added basic functionality for DAO ACKs and DTSN. Randomized DAO timer. 2010-06-06 21:42:50 +00:00
joxe
f4508cc1e2 minor fixes + improved debug-printout 2010-06-06 12:45:55 +00:00
joxe
e75c77937e fixed bug that caused problems when uncompressing unspecified address 2010-06-06 12:44:12 +00:00
joxe
17209e8fa4 moved code for autoconfiguring global address into join_dag 2010-06-03 18:37:47 +00:00
nvt-se
c201058325 Purge all routes related to a DAG being freed. Do not send no-DAOs when doing a global repair. 2010-06-03 15:20:56 +00:00
joxe
ba2bf31c20 changed DAOs to be formatted according to the rpl-08 specification 2010-06-03 14:49:15 +00:00
nvt-se
f52e97111f Made the remove_parents function more powerful by adding a flag that indicates whether no-DAOs should be sent or not. Fixed some style issues and a possible NULL pointer dereference. 2010-06-03 12:55:09 +00:00
nvt-se
352fb4e74d Restrict the rank to INFINITE_RANK 2010-06-03 12:12:20 +00:00
joxe
62abed8347 fixed a minor bug causing too low rank during global repair 2010-06-02 16:54:59 +00:00
joxe
941443878b fixed rank calculation bug in of-etx 2010-06-02 16:23:08 +00:00
joxe
f069320ca9 removed sequence_number and replaced with version - fixing global repair functionality 2010-06-02 11:59:51 +00:00
joxe
fec0e8df69 changed RPL to be more 08 compliant - DIO and DIO options are formatted as in RPL-08 2010-06-01 22:30:02 +00:00
joxe
7887559d56 fixed bug in ttl decompression 2010-06-01 12:37:54 +00:00
joxe
518f9c1a00 refactoring and cleanup 2010-05-31 20:42:27 +00:00
nifi
b54c6e673b Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t for compability with IPv6 2010-05-31 15:22:08 +00:00
nvt-se
c13bb8666b Better validation of incoming DIOs. Added a reset function to the OF API. 2010-05-31 14:22:00 +00:00
oliverschmidt
126ea40994 Removed UIP_CONF_PLAIN_BUFFER again now that the pointer indirection to uip_buf was removed again. 2010-05-30 09:46:12 +00:00
nvt-se
f135105567 Added support for multiple objective functions. 
Extended the objective function API with a callback function that receives link-layer neighbor information.

Throttled DAO transmissions to one per DEFAULT_DAO_LATENCY period.

Added support for an ETX objective function (hysteresis control still lacking though).

Fixed a leak of routes installed by DAOs.

Control that dst_adv_supported is set before sending DAOs.

Improved debugging output.
 2010-05-29 22:23:21 +00:00
nifi
f6e0b46f38 * Made Chameleon header processing module configurable (CHAMELEON_CONF_MODULE) 
* Removed the unused init function from header processing modules
* Added option CHAMELEON_CONF_WITH_MAC_LINK_ADDRESSES to specify that
  MAC link addresses should be used instead of Chameleon's own encoding
  of sender and receiver. This avoids encoding the link addresses twice
  when the MAC RDC has its own addresses.
 2010-05-28 06:18:39 +00:00
nifi
b7b2c8fcde Added macro to identify address attributes for use in header processing modules 2010-05-27 20:28:29 +00:00
nifi
ac9b862cd0 Added configurable support for 802.15.4 autoack 2010-05-26 14:12:33 +00:00
nvt-se
320fa820ca Renamed neighbors to parents. Removed redundant code. Corrected the logic for max rank increase. 2010-05-25 21:58:54 +00:00
joxe
34b8313fb6 added experimental support for disseminating autoconf prefix via DIO suboption 2010-05-25 19:19:43 +00:00
nvt-se
6c4bf93141 Handle MAC_TX_ERR notifications. 2010-05-25 15:29:51 +00:00
nvt-se
c5d1c3ea27 Improvements to local repair and DAO handling. 2010-05-24 16:38:56 +00:00
nvt-se
f882901bf6 Remove unreachable neighbors immediately, rather than using an ETX threshold that leads to slow topological repairs. ETX information should later be stored even for removed neighbors if there is room. 2010-05-24 16:38:17 +00:00
joxe
16c212798f cleanup of the code, removing dead core + adding local vars to save some space. 2010-05-24 14:28:56 +00:00
joxe
2d447502d4 changed uip_buf to a union for 32-bit alignment 2010-05-24 10:07:34 +00:00
joxe
9db7f06368 fixed compiler warnings 2010-05-24 09:57:20 +00:00
joxe
56a3a71108 added include of string.h since memcpy are used 2010-05-19 16:16:57 +00:00
joxe
5c30aed814 removed nd llao option struct since not naturally aligned - replaced struct fields access with array based access 2010-05-19 12:21:45 +00:00
nvt-se
4411807b29 Fixed bug in DAO input. Made printfs more portable. 2010-05-18 16:43:56 +00:00
nvt-se
8c3ed291bb Preserve the file offset if a seek operation fails. 2010-05-13 18:24:55 +00:00
nifi
ed4debe285 Changed neighbor notification to be default on when using RPL 2010-05-11 10:02:29 +00:00
nifi
7aeb206840 Added isinfinite to uip_ds6_defrt_t to handle infinite life time 2010-05-10 13:46:35 +00:00
joxe
058ef029e4 replaced hardcoded value with constant for route lifetime 2010-05-10 11:16:35 +00:00
joxe
c0c7cea3ce fixed bug that caused select_src to set a non legal address - now sets unspecified if no address found 2010-05-10 11:10:27 +00:00
joxe
6f66d36d67 avoid sending DAO when address is tentative 2010-05-09 19:12:47 +00:00
joxe
adb00ed932 factored out function for getting link local address in ds6 and made use of it in rpl for checking state of lladdress as DIOs should not be sent when tentative 2010-05-09 17:52:37 +00:00
oliverschmidt
e5665fb968 The recent change turning uip_buf from an array to a pointer seems a quite heavyweight way to have the uip_buf alligned to a 32-bit boundary. Contiki is - still - supposed to be portable across a wide range of toolchains - therefore it i.e. intentionally doesn't use C99 features. From that perspective it seems questionable if all toolchains are able to optimize away the overhead imposed by an "unnecessary" indirection to access uip_buf - and uIP consists mostly of accesses to uip_buf. Even if the future is supposed to bring support for multiple uip_bufs which would turn the uip_buf pointer from a mere workaround to an neceesary element on can still presume that there will be targets with resources limited in a way prohibiting the use of several uip_bufs. So at least for those targets will still be a usecase for a "plain", not indirected uip_buf. 
Therefore it seems reasonable to allow to stay with the "plain" uip_buf at compile-time.
 2010-05-08 07:23:55 +00:00
oliverschmidt
dec19626e8 Adjusted UIP_CONF_EXTERNAL_BUFFER to apply to actual buffer only. 2010-05-07 20:45:16 +00:00
fros4943
bc0ea1f81d bug fix: dag pointer may be NULL 2010-05-07 13:51:34 +00:00
joxe
cd5dfa9692 added const for the uip_buf pointer for more efficient and smaller uip code and fixed same construct for the sicslowpan code 2010-05-05 13:07:45 +00:00
nvt-se
e4187b2fc8 Made pointers constant and thereby reduced the code size slightly. 2010-05-05 12:35:39 +00:00
nvt-se
361e210751 Improvements to style and commentary. 2010-05-04 22:55:32 +00:00
joxe
01881f92a8 added missing include 2010-05-04 14:41:55 +00:00
joxe
790819e701 allocate uip_buf as uint32_t to avoid risk for unaligned uip_buf on 32 or 16 bit architectures 2010-05-04 09:19:41 +00:00
joxe
7d235841b3 always include the RPL route state to allow compilation of rpl code 2010-05-03 14:12:03 +00:00
nifi
6c86398778 Added check to not copy or create too large packets 2010-05-02 14:59:11 +00:00
nifi
a04372adc4 Fixed conversion of packetbuf address type to address index and corrected return value 2010-05-02 12:21:34 +00:00
joxe
f72bd5572c added initialization of RPL 2010-05-01 13:04:31 +00:00
joxe
0531d9bd82 moved RPL routing state struct into uip-ds6 2010-05-01 12:02:25 +00:00
nvt-se
9a4a9b9437 Removed return value in function that should not return a value. 2010-04-30 23:13:58 +00:00
nvt-se
ecada2d1ac *** empty log message *** 2010-04-30 23:10:45 +00:00
nvt-se
b8a3a4109e Adjusted the code so as to remove compilation warnings. 2010-04-30 22:18:12 +00:00
nvt-se
b822dbb25e Addressed compilation warnings. 2010-04-30 15:04:47 +00:00
nvt-se
4106f4d798 Increased minimum DIO interval from 1024 ms to 4096 ms in order to more calm in duty-cycled networks. 2010-04-30 15:03:55 +00:00
joxe
168a65d989 added ContikiRPL - an implementation of IETF ROLL RPL 2010-04-30 13:43:53 +00:00
joxe
167b0d636e added icmp_send function and moved rpl input function signature 2010-04-30 13:22:21 +00:00
joxe
dc1a5f70ff added uip-debug utilities 2010-04-30 13:20:57 +00:00
nvt-se
7e0e2fe284 Removed obsolete rime-route code for IPv6 2010-04-30 12:43:37 +00:00
joxe
cc9914a4f3 fixed uip to use UDP_BUF instead of TCP_BUF when setting udp ports - minor cleanup 2010-04-30 08:46:27 +00:00
adamdunkels
3d10dedecf Added a safety measure against a problem where a node in rare situations would turn itself into a sink. Not entirely sure why this happens, but the safety measure should at least avoid the results of the problem. Added more debug messages. 2010-04-30 07:33:51 +00:00
adamdunkels
0859d4b95f Avoid turning off the radio in the middle of a packet reception 2010-04-30 07:32:39 +00:00
adamdunkels
e606c674c2 Rewrote LPP so that it uses 802.15.4 headers. A number of bugfixes with respect to alignment. Avoid turning off the radio in the middle of packet reception. 2010-04-30 07:31:44 +00:00
adamdunkels
55b6129bd2 Debug printout fix 2010-04-30 07:29:31 +00:00
adamdunkels
e523c36cdf Removed the (unused) header packet of the queuebuf. Added a function for accessing address attributes in the queuebuf 2010-04-30 07:29:08 +00:00
adamdunkels
3c735fcea4 Added a packetbuf flag that indicates if the link layer acks should be used or not 2010-04-30 07:25:51 +00:00
adamdunkels
798f1c63bd Make it possible to receive multicast UDP packets 2010-04-30 07:19:33 +00:00
adamdunkels
a1f69138d1 Avoid adding elements twice 2010-04-30 07:18:24 +00:00
fros4943
18e5718c97 avoid freeing queuebuf multiple times, and free buffer after cancelling connection 2010-04-27 13:08:55 +00:00
fros4943
12b6f35ce7 PRINTF()ed debugging output 2010-04-27 12:56:35 +00:00
nifi
85d6f6c514 removed unused variable 2010-04-26 22:41:50 +00:00
nifi
875ad7ffda Fixed to not change the header if the header allocation fails 2010-04-26 22:05:40 +00:00
nifi
b26f45a35b code cleanup 2010-04-26 17:55:11 +00:00
nifi
d761b6e89a Added MAC header to handle padding 2010-04-26 17:46:21 +00:00
fros4943
ce1374087b allow elf loader memory configuration at compile time 2010-04-26 14:02:07 +00:00
nifi
14b1bb9f57 Fixed to only use leds when DEBUG is set 2010-04-20 11:41:16 +00:00
nvt-se
f9ca4a546d Introduced append-only mode for systems with little available code space left, but which require basic FS support. Removes about 1.5kB ROM when the mode is enabled, i.e., COFFEE_CONF_APPEND_ONLY=1 2010-04-12 13:20:55 +00:00
nvt-se
2e5d97366a ensure matching format and type in debug printf 2010-04-09 16:21:07 +00:00
adamdunkels
3670fac618 Bugfix: timing fixed 2010-04-08 18:23:24 +00:00
adamdunkels
f2bf8965d5 MAC sequence number attribute 2010-04-08 09:46:30 +00:00
adamdunkels
91ff8574ad Improved handling of duplicate packets 2010-04-08 09:32:56 +00:00
nvt-se
ac4ba199bc Turn off DEBUG mode by default. 2010-04-06 21:37:54 +00:00
anthony-a
694e1498f4 merge change from branch into mainline. <fingers crossed> 2010-04-06 19:10:21 +00:00
nvt-se
75dd41601b Added a macro for checking if an address is link local. 2010-04-06 16:47:18 +00:00
adamdunkels
497111bcc9 Added an optional rate limit for broadcast transmissions 2010-04-06 11:57:43 +00:00
adamdunkels
e06a30fdb0 Added MAC-layer duplicate message suppression, which is very helpful when running with duty cycling turned off 2010-04-05 19:28:07 +00:00
adamdunkels
c68ee6e577 Bugfix: memory from the wrong memb was freed. 2010-04-04 21:02:09 +00:00
adamdunkels
a4c328785a Small timing tweaks 2010-04-04 21:01:24 +00:00
adamdunkels
62039a530d Removed non-existant cooja-debug.h include 2010-04-04 12:31:47 +00:00
adamdunkels
7d6ff0289e Fiddled more with the timing: the phase seems stable now at least. Still bugs left though... 2010-04-04 12:28:29 +00:00
adamdunkels
be117afe04 After a lot of tweaking and twiddling with the timing of the ContikiMAC code and the mechanisms in the CC2420 driver, things seem to work somewhat stable now - knock on wood! 2010-04-04 07:49:30 +00:00
adamdunkels
a637ddaf4e Flush the rxfifo when turning off the radio instead of when turning it on. This seems to fix a bug that was seen in mspsim and seemed to appear on real hardware too. 2010-04-03 16:01:00 +00:00
adamdunkels
83eaa70f03 Added pending flag 2010-04-03 13:34:20 +00:00
adamdunkels
121ca946e1 Improved phase lock behaviour when neighbor is not duty cycling: senders notify receivers via the 802.15.4 pending bit that they are not duty cycling. Neighbors then will start sending packets immediately and not wait for neighbors' phase. Tweaking of ContikiMAC timers to make it more reliable. 2010-04-03 13:28:30 +00:00
joxe
6ae86d001d made number of phase neighbors configurable 2010-04-01 17:17:36 +00:00
fros4943
59357e8b75 PRINTF():ed debugging output 2010-04-01 11:08:36 +00:00
adamdunkels
cc11c9d3f2 Added missing #define 2010-04-01 10:56:00 +00:00
adamdunkels
a8d8b6d31d Improved parent management: parent neighbor is retained until a better neighbor is found (with 1 ETX less than parent). Don't drop parent neighbors when loop is detected (loops are transient anyway). 2010-04-01 10:45:21 +00:00
adamdunkels
d7457bc340 Improved parent management: parent neighbor is retained until a better neighbor is found (with 1 ETX less than parent). Don't drop parent neighbors when loop is detected (loops are transient anyway). 2010-04-01 10:03:19 +00:00
adamdunkels
add426de4b Bugfixed stream mode: node listens 100% for 0.5 seconds in stream mode. Naming change: is_listening changed is_snooping. 2010-04-01 10:02:04 +00:00
adamdunkels
5b121b4829 Set stream bit only on non-FIN TCP segments 2010-04-01 10:01:01 +00:00
adamdunkels
b43f7830b3 Fine-tuned the timing and phase lock optimization 2010-03-31 20:27:15 +00:00
adamdunkels
c9ca5d61e2 Rewrote the pending_packet() function to check the FIFOP pin instead of the 'pending' variable - works must better on real hardware and is now supported by the latest mspsim 2010-03-31 19:08:56 +00:00
adamdunkels
4e33112d3e Guard against malformed broadcast announcements 2010-03-31 12:17:24 +00:00
adamdunkels
877eb2fbe9 Fiddled with the timing 2010-03-31 11:54:38 +00:00
fros4943
3bd07ea55a bugfix: refresh correct source route 
+
refreshing gateway route whenever data is received via a gateway
 2010-03-31 09:38:42 +00:00
adamdunkels
bcfa80102d Had previously not included the waiting time that the CC2420 introduces when sending a packet. Also increased the smallest packet size, just to be on the safe side. 2010-03-30 23:01:32 +00:00
adamdunkels
4d5f112960 New return value for invidating a link-layer collision 2010-03-30 23:00:22 +00:00
adamdunkels
5e7f99a2c0 Reverted the removal of the code that checked the FIFOP pin before reading a packet - checking FIFOP is the correct way to do it. Also added TXONCCA for now, including new radio.h return values to indicate a link-layer collision. 2010-03-30 23:00:05 +00:00
adamdunkels
226abb8ec3 Removed non-existant include file 2010-03-29 22:10:03 +00:00
adamdunkels
4e3268e2e2 Added function that removes the header 2010-03-29 21:53:04 +00:00
adamdunkels
4c3b69dc07 Configuration parameter for number of MAC-layer retransmissions 2010-03-29 21:52:25 +00:00
adamdunkels
9c58768b59 Extend packet size after creating 802.15.4 header; prepare radio chip with packet before waiting for neighbor phase to make phase wait time deterministic 2010-03-29 21:51:36 +00:00
adamdunkels
b4b7e942b6 Back off a guard time for every non-ack packet 2010-03-29 21:50:01 +00:00
oliverschmidt
315e446584 Adjusted formal parameter to single existing actual parameter. 2010-03-29 20:26:14 +00:00
fros4943
0fcbfae836 updated function: has_value argument was missing 2010-03-29 12:13:35 +00:00
fros4943
671629dea0 moved packet_sent function, it was in a HC06-specific unit 2010-03-29 11:48:09 +00:00
fros4943
b952f97799 stopping watchdog during find_file 2010-03-29 11:31:35 +00:00
joxe
bd6cd03c1d moved prefix to avoid compiler warning 2010-03-26 15:12:57 +00:00
nifi
9508d2c4d7 * Added configurable default number of transmissions for CSMA to use when not specified using packetbuf attributes (CSMA_CONF_MAX_MAC_TRANSMISSIONS). 
* Renamed packetbuf attribute PACKETBUF_ATTR_MAX_MAC_REXMIT to PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS where value 0 (attribute not set) means that default number of transmissions should be used.
 2010-03-26 12:29:29 +00:00
joxe
bec1ccc57d added support for all UDP port compressions in hc06 2010-03-26 10:28:51 +00:00
nifi
0ec8d499e4 Bug fix: only call subscriber if set 2010-03-25 19:30:44 +00:00
adamdunkels
a4f9e62295 Added a parameter to collect_open() that specifies whether or not the node should be a router for packets, or only an originator of packets. Updated the collect module to the new annoucement API. 2010-03-25 08:51:07 +00:00
adamdunkels
2559e27414 API change to the announcement module: an annoucement can now be registered without a value. Such announcements are never transmitted to neighbors, until the announcement's value is set. 2010-03-25 08:49:56 +00:00
adamdunkels
4d68bdf74b Bugfix and addition by Dogan Yazar: psock_readbuf() shouldn't wait for a full buffer (which might never happen); a new function for sending strings that batches data and sends full buffers instead of individual strings. 2010-03-24 21:03:32 +00:00
nifi
c623616afd Neighbor state notification also when adding new neighbors 2010-03-24 16:29:45 +00:00
nifi
052c8db9f9 Added option for neighbor state changed notifications 2010-03-24 16:16:33 +00:00
joxe
4a6c6b0534 added route_rm_by_nexthop and small code cleanup 2010-03-23 14:21:04 +00:00
fros4943
4833c6555e moved inclusion of rtimer-arch.h to top of rtimer.h, to avoid circular rtimer_clock_t dependencies 2010-03-23 13:35:00 +00:00
fros4943
5eb391dbe1 allows rtimer_clock_t to be defined from contiki-conf.h 2010-03-23 13:24:38 +00:00
fros4943
95e870cc46 bugfix: structs should be declared static 2010-03-22 11:32:29 +00:00
fros4943
3394a3ef23 make sure not to add an already existing list element, as it breaks the list iteration functions 2010-03-22 11:29:58 +00:00
nvt-se
0eae63b29a Set a higher start ETX. Avoiding adding a neighbor after a failed packet transmission. 2010-03-19 16:55:29 +00:00
adamdunkels
9d06d84255 Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module 2010-03-19 13:25:15 +00:00
adamdunkels
49009e9cbd Extend the length of announcement packets if they are too short 2010-03-19 13:24:58 +00:00
adamdunkels
2e8bfa5d9a Include new broadcast-announcement and renamed collect-neighbor in compilation 2010-03-19 13:21:24 +00:00
adamdunkels
f2c9b3e813 Remove old neighbor.h inclusion 2010-03-19 13:20:40 +00:00
adamdunkels
a3a8c0e179 Safety check: only try to read a packet if it was preceeded by an interrupt (which sets the pending flag) 2010-03-19 13:18:53 +00:00
adamdunkels
3a5be4a7e4 Added broadcast announcement module and collect-neighbor module 2010-03-19 13:17:55 +00:00
adamdunkels
14453e9fb7 Slight API change to support bump functionality 2010-03-19 13:17:31 +00:00
adamdunkels
7b0606cd58 Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module 2010-03-19 13:17:00 +00:00
adamdunkels
137e02baac Added a bump method that tells the announcement module that a value has changed sufficiently much for it to be pushed out quicker 2010-03-19 13:16:11 +00:00
adamdunkels
17db783fb0 Broadcast announcement back-end that sends announcement data as broadcasts, with increasing transmission intervals 2010-03-19 13:15:19 +00:00
nifi
7f7922a10d typos 2010-03-19 12:54:38 +00:00
joxe
cf9acf4748 made it possible to have zero contexts to avoid stateful compression in hc06 2010-03-19 08:15:20 +00:00
joxe
17a721a7e4 fixed buggy define for Traffic class and Flowlabel compression 2010-03-17 20:57:25 +00:00
adamdunkels
115b3a7c5c Minor timing bugfix: the time between channel checks should not include the time required for the channel check itself 2010-03-17 18:24:06 +00:00
adamdunkels
efeb9944fa Increase the required non-activity periods before turning off the radio; remove the strict phase requirement (which messes up things with low-power streaming) 2010-03-17 16:35:52 +00:00
nvt-se
1a9e00ab78 Purge neighbors that go over a configurable ETX limit. Increase the no-ACK penalty. 2010-03-17 15:08:46 +00:00
nvt-se
4e0ceedc47 Enabled external neighbor removal 2010-03-17 15:00:52 +00:00
fros4943
55f780ec19 removed debugging output 2010-03-17 14:36:46 +00:00
joxe
4f27fcf766 added ipaddr variable if not UIP_ROUTER is defined 2010-03-17 12:30:25 +00:00
joxe
e8916fe01f added hooks for adding an external header compressor 2010-03-17 12:08:59 +00:00
nifi
ea090a60e6 Fixed to call the SLIP callback function also when using IPv6 2010-03-17 07:10:25 +00:00
joxe
d113577a8e made UIP_ND6_SEND_RA configurable from platforms and projects 2010-03-16 18:27:22 +00:00
adamdunkels
36b995cc9a Reenabled announcement support 2010-03-16 18:12:34 +00:00
adamdunkels
9be1a65211 Don't set the RELIABLE flag on incoming packets with the ack requested flag set, since it is set on most packets even if they aren't reliable 2010-03-16 18:11:58 +00:00
adamdunkels
b1feac5a00 Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100% 2010-03-16 18:11:13 +00:00
adamdunkels
67b0170a43 Bugfix: don't care about FIFOP when reading a packet; if the radio rx had been turned off before a packet was read, FIFOP would be zero and the packet would be trashed 2010-03-16 18:10:09 +00:00
nifi
6b7ec2d002 removed uip_router 2010-03-16 15:45:20 +00:00
nifi
75091661e6 fixed typo 2010-03-16 15:41:00 +00:00
joxe
b4adc6bcb5 added fallback interface and removed uip_router 2010-03-16 15:35:03 +00:00
joxe
2b44f809fb added support for extending route entries 2010-03-16 14:11:46 +00:00
joxe
453cf7f2e6 refactoring of hc06 code 2010-03-16 10:21:04 +00:00
nifi
55e0fec37e * Changed to write keys to CC2420 RAM big-endian order 
* Fixed cc2420_aes_cipher() to wait for encryption to finish before reading result
 2010-03-15 23:04:54 +00:00
nifi
e834562455 * Fixed FASTSPI_READ_RAM_LE to wait for tx end before reading 
* Added FASTSPI_WRITE_RAM_BE to write to RAM (big-endian order)
 2010-03-15 23:01:37 +00:00
nvt-se
7f687b99e6 Debug off by default 2010-03-15 19:22:29 +00:00
nifi
3f8b346c29 replaced obsolete netif include with new ds6 2010-03-15 16:54:35 +00:00
joxe
fd3d6c44d0 integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling 2010-03-15 16:41:24 +00:00
joxe
7d5e3fbfde added function to retrieve elapsed time 2010-03-15 15:53:57 +00:00
adamdunkels
a9bad71fbd Increased the number of bits that repressent the MAX_RETRANSMITS attribute to allow for more than 7 hop-by-hop retransmissions 2010-03-14 23:01:12 +00:00
adamdunkels
7bab9316da Two major changes: 
* Low-power streaming. Experimental support for a low-power mode which
  allows rapid exchange of packets with a 16% duty cycle. Does not
  seem to function correctly yet though.

* Phase locking. When the phase of a neighbor has been detected, the
  sender assumes that the neighbor will keeps it phase and does not
  send more strobes than necessary to hit the receiver's channel
  check - even if the receiver does not acknowledge the reception of
  the strobes when it should have been awake. Instead, the sender
  stops strobing and tries again at a later time.
 2010-03-14 22:59:23 +00:00
adamdunkels
0035a70537 Reworked the locking code, which seems to fix a few bugs caused by the interaction with contikimac. Contikimac performs a CCA check in a preempting rtimer, which requires underlying code to properly call the GET_LOCK() macro. This fix seems to solve most problems, but there may be others left. 2010-03-14 22:45:20 +00:00
oliverschmidt
def540e6c0 Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments. 
There were btw other even longer lines with expansions of the same macro already present.
 2010-03-14 12:13:54 +00:00
joxe
e8bd53cfd8 added typedef of icmp6_error 2010-03-13 09:25:24 +00:00
dak664
0236c6e725 Leave compiler warning for 16 bit timers 2010-03-12 17:51:07 +00:00
joxe
4c2daf9886 started integration of Mathildes and Juliens new uip6 code + made some ND timers configurable 2010-03-12 16:19:19 +00:00
dak664
7c5eed6bda Add includes needed by AVR-gcc, fix compiler warning 2010-03-12 15:23:57 +00:00
dak664
52c9f4bde3 Remove compiler warning 2010-03-12 15:21:14 +00:00
nifi
2cf0fb9cce Changed to use short address mode with short rime addresses 2010-03-12 14:49:21 +00:00
nvt-se
6be0bac1a1 minor include fix + added documentation 2010-03-12 13:40:13 +00:00
nvt-se
881fac7f50 fixed comment 2010-03-12 13:25:14 +00:00
nvt-se
6ce15b14c9 prepend net/ to include paths 2010-03-12 13:23:50 +00:00
nvt-se
c316fc2fa9 Make it possible to provide feedback to the neighbor modules 2010-03-12 13:20:13 +00:00
nvt-se
814dd8bf59 Added generic modules for neighbor information. 2010-03-12 13:19:45 +00:00
joxe
d75ec2da53 fixed so that uip6 sends icmp6 errors from correct source when acting as router - improves support for tracert, etc. 2010-03-11 18:07:37 +00:00
nifi
58c55340ed fixed to work with IPv6 2010-03-10 22:30:39 +00:00
adamdunkels
90bb63a383 Set the (correct) packet attribute to let the MAC layer perform retransmissions 2010-03-09 20:40:50 +00:00
adamdunkels
4b60301727 Don't set the ack flag for broadcast packets 2010-03-09 20:40:11 +00:00
adamdunkels
17f6b3a324 Simplified the structure of the code 2010-03-09 20:38:55 +00:00
adamdunkels
d0e6436a20 Don't call up the netstack if the transmission was deferred 2010-03-09 20:37:02 +00:00
c_oflynn
dc3e6c1877 Fix TC/FL errors in hc-06. Need to verify further 2010-03-09 16:19:44 +00:00
joxe
48a9bff889 added support for dropping packets if hop limit is reached 2010-03-09 15:50:15 +00:00
joxe
1214b1fa40 made cc2420 panid and short address not dependent on endianness 2010-03-09 15:45:29 +00:00
c_oflynn
1d483a5da4 Fix UDP compression to work per hc-06. More commits to come to fix Traffic Class stuff... 2010-03-09 15:18:03 +00:00
nvt-se
bf2e85a57f supply an argument of the same type as the print format 2010-03-09 14:14:36 +00:00
adamdunkels
edda6dd86c Minor bugfix: don't subtract collisions and deferrals from the number of transmissions 2010-03-09 13:23:58 +00:00
adamdunkels
5a6fc2ade0 Bugfix: set up rtmetric before starting to announce it. Set the number of MAC layer retransmissions correctly 2010-03-09 13:21:28 +00:00
adamdunkels
2c3d3e3d73 Bugfix: handle deferred transmissions correctly (don't count them) 2010-03-09 13:20:08 +00:00
adamdunkels
79722b4247 Rework of the timing conditions of ContikiMAC: the old timing did not work well on real hardware, the new one seems to work better 2010-03-09 13:19:05 +00:00
adamdunkels
cc7d3ae142 Reset CCA mode to default. Make sure that the radio gto switched on when reading RSSI; otherwise node will reboot because of watchdog 2010-03-09 13:18:16 +00:00
nvt-se
96eb20d235 forward arguments even if REXMIT is not set 2010-03-04 14:17:43 +00:00
dak664
c65e09ceb2 Remove compiler warnings 2010-03-02 15:41:23 +00:00
nifi
5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
nifi
0c084b8c68 added random init of sequence number 2010-03-01 13:17:01 +00:00