joxe
7d220c910a
removed uip_router
2010-03-16 15:45:20 +00:00
nifi
0299aab5e4
Fixed to use sky-sensors to setup ADC12
2010-03-15 23:37:01 +00:00
dak664
cae40439d7
Add optional RS232 debugging
2010-03-15 18:56:13 +00:00
joxe
fd3d6c44d0
integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling
2010-03-15 16:41:24 +00:00
fros4943
645d505f46
contiki-cooja-main.c requires CLASSNAME
2010-03-15 11:03:17 +00:00
fros4943
5b2caf2050
removed the use of a template source file when compiling for the cooja platform, instead compiling against contiki-cooja-main.c.
...
this change simplifies access to the contiki main source, and makes the cooja platform more similar to other contiki targets
2010-03-15 11:02:57 +00:00
fros4943
89d7d926c4
added ipv4 and ipv6 default configuration
2010-03-10 12:18:29 +00:00
fros4943
7465fb812a
removed explicit init-net*.c for cooja platform, instead performed in main file (contiki-template.c)
2010-03-10 12:18:07 +00:00
fros4943
f8488925eb
added uip-driver (for both ivp4 and ipv6), setting WITH_UIP* compiler flags in Makefile
2010-03-10 12:15:52 +00:00
fros4943
f36cfffc99
Makefile target for uploading precompiled firmware, example:
...
make upload-ihex FILE=myfile.ihex
2010-03-10 11:46:57 +00:00
fros4943
98929bd2f5
cooja-platform netstack conf example
2010-03-10 07:35:49 +00:00
fros4943
45a6740782
radio sensor was removed
2010-03-10 07:35:09 +00:00
fros4943
48d6d1fd6d
removed no longer used cooja/contiki synchronization variables
2010-03-09 08:14:31 +00:00
fros4943
0cc96ae481
net stack update: currently fixed to null* and rime.
2010-03-09 08:14:06 +00:00
fros4943
f87458c558
removed radio "sensor" (only used for signal strengths, also available in radio driver)
2010-03-09 08:12:15 +00:00
fros4943
07753fb01f
updated radio driver, simplified code
2010-03-09 08:11:05 +00:00
oliverschmidt
8ca206aa6b
Changed ETH64 base address from $DE10 to $DE00 as this is the default base address according to the manufacturer.
2010-03-06 13:05:16 +00:00
nvt-se
0fc1c00f09
Use LPP for radio duty cycling. 1 Hz channel check rate
2010-03-04 15:04:28 +00:00
nvt-se
20cae40694
use CSMA
2010-03-04 14:36:48 +00:00
nvt-se
2aa9d22f34
Switched to the NETSTACK API.
2010-03-04 14:16:30 +00:00
nifi
efe8f200af
Updated to match the new netstack api
2010-03-02 22:40:39 +00:00
dak664
d3697344ec
Update for NETSTACK_CONF_FRAMER
2010-03-02 16:25:47 +00:00
dak664
7c020468b5
Remove frame.h include, expose raven_ping6 for external calls
2010-03-02 15:15:03 +00:00
nifi
1025e7337c
Added configurable router module
2010-03-01 14:46:57 +00:00
nifi
5e43a6998b
Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.
2010-03-01 13:30:21 +00:00
dak664
feb6aa0ed2
Change back to SICSLOWPAN_COMPRESSION_HC06 from SICSLOWPAN_COMPRESSION_HC01
2010-02-28 21:39:40 +00:00
dak664
39e6f6a830
Clean up, functional webserver for further testing of low power protocols
2010-02-28 21:29:19 +00:00
dak664
5debc183a9
Enable radio stats in sensor cgi as default
2010-02-26 21:38:57 +00:00
dak664
844b3a34f7
Platform 0 was matching by default
2010-02-26 21:15:28 +00:00
c_oflynn
b5b77ac47a
Use new HC06
2010-02-26 10:55:00 +00:00
joxe
80b289f7c1
updated sky platform for new sicslowpan
2010-02-25 15:51:37 +00:00
kasunch
350fb21ff7
Adding a Makfile for example applications.
2010-02-24 09:14:46 +00:00
kasunch
80a408526f
Adding an example application for battery sensor
2010-02-24 09:13:56 +00:00
kasunch
c90b76427a
Adding ADC sources and battery sensor source to CONTIKI_TARGET_SOURCEFILES.
2010-02-24 09:09:35 +00:00
kasunch
0c9612b7b9
Adding battery sensor
2010-02-24 09:05:40 +00:00
kasunch
ea53e5b845
Adding ADC functions
2010-02-24 09:04:58 +00:00
nifi
07ee8458e7
Fixed bootup printf() with 32-bit timer values
2010-02-23 21:02:30 +00:00
nifi
bb9d430138
added bootup print of NETSTACK_RDC name
2010-02-23 20:54:09 +00:00
adamdunkels
85a9f7db42
Fix bootup printf() with 32-bit timer values
2010-02-23 18:45:16 +00:00
adamdunkels
eadfe5f3d6
Enabled 32-bit clock ticks to allow longer timeouts; experimentally disabled polite announcements in favour of a non-announcement based collect protocol
2010-02-23 18:44:52 +00:00
adamdunkels
69a5b67523
Updated netsim to new netstack API
2010-02-23 18:44:08 +00:00
adamdunkels
08f06d8039
Updated to new sensors API
2010-02-23 18:43:43 +00:00
adamdunkels
757ca59511
Added netstack init to native platform
2010-02-23 18:43:21 +00:00
adamdunkels
ebea184116
Added netstack config for CC2420 radio driver, and also for cxmac RDC layer (which is not confirmed if it runs on real hardware, only tested in simulation)
2010-02-23 18:42:41 +00:00
dak664
e695e4860d
Allow build with original radio driver using $make RF230BB=0
2010-02-23 17:43:20 +00:00
dak664
64d57a3dd8
Update jackdaw to new radio driver interface
2010-02-23 17:35:49 +00:00
dak664
a64a8674bc
Remove debug print
2010-02-23 02:22:25 +00:00
dak664
cbb8621e30
update to new driver format
2010-02-22 22:23:18 +00:00
adamdunkels
60425aa355
ESB uses tr1001 radio
2010-02-18 23:53:21 +00:00
adamdunkels
fa4d4db329
Use the common netstack_init
2010-02-18 23:19:03 +00:00
adamdunkels
927aa821c3
Updated to new MAC api
2010-02-18 23:10:06 +00:00
adamdunkels
459c550cbd
Updated to match the new netstack api
2010-02-18 23:04:54 +00:00
adamdunkels
e34eb54960
A work-in-progress rework of the Contiki MAC and radio layers. The
...
main ideas are:
* Separates the Contiki low-layer network stack into four layers:
network (e.g. sicslowpan / rime), Medium Access Control MAC
(e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
that specify what mechanism/protocol/driver to use at the four
layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
the fate of a transmitted packet: if the packet was not possible to
transmit, the cause of the failure is reported, and if the packets
was successfully transmitted, the number of tries before it was
finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
efficient radio duty cycling protocols: channel check, pending
packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
#defines.
2010-02-18 21:48:39 +00:00
dak664
6df1e0ca58
add experimental cxmac code
2010-02-18 17:24:12 +00:00
dak664
38c5922294
experimental cxmac code
2010-02-18 17:23:19 +00:00
dak664
72e1528ea7
Make sicslowmac the default!
2010-02-16 23:42:06 +00:00
dak664
1da06eff83
Specify mac driver in contiki-conf.h
2010-02-16 22:22:13 +00:00
dak664
53801ffbb1
Add optional RF230BB radio driver
2010-02-16 22:17:51 +00:00
dak664
1bdff78e6e
Remove compiler warnings
2010-02-15 20:54:37 +00:00
joxe
3a2eec2b1a
fixed ext-sensor for jcreate
2010-02-13 11:20:48 +00:00
oliverschmidt
a66821f1d1
Explicitly turn on forms and centering for consistency reasons.
2010-02-13 10:46:36 +00:00
oliverschmidt
7ef7efecd8
Without forms, centering and history we can just squeeze in DNS.
2010-02-13 10:44:23 +00:00
dak664
dd4bf06430
Add serial command to send voltage measurement to webserver
2010-02-12 16:46:39 +00:00
dak664
ed76239525
Add RADIOSTATS to sensors cgi
2010-02-12 16:42:59 +00:00
dak664
c0e12ffa54
Enable ADC2 for optional external supply voltage measurement
2010-02-11 21:58:51 +00:00
dak664
cc47c556e7
Optionally measure ADC2 along with temperature
2010-02-11 20:49:31 +00:00
dak664
e9d760bf9e
Convert <CR><CR><LF> line endings to <LF>
2010-02-11 20:42:36 +00:00
dak664
e4ec444611
Send optional ADC2 measurement to 1284p
2010-02-11 20:35:22 +00:00
dak664
4576b7b671
Add option to measure external supply voltage on ADC2
2010-02-11 20:22:11 +00:00
dak664
e7d2b64894
Convert <CR><CR><LF> line endings to <LF>
2010-02-11 20:19:51 +00:00
dak664
97ea7b0376
Add SEND_ADC2 command definition
2010-02-11 18:37:21 +00:00
dak664
6a2d1c057a
Allow cygwin remakes and cleans
2010-02-11 18:34:39 +00:00
dak664
c321531021
Document temperature and voltage measurement features and/or bugs
2010-02-11 18:31:27 +00:00
dak664
5eacbeedba
*** empty log message ***
2010-02-10 22:53:55 +00:00
oliverschmidt
50be40768b
Removed closing of stdin, stdout (and stderr on the Apple2). It was introduced in order to maximize the number of available file handles for the webserver. However none of the target machine DOSes allows to open a single file several times diminishing the intended effect very much. One the other hand not being able to "just printf() something" causes trouble over and again - i.e. hello-world seemingly not working...after all a typical case of german over-enigneering ;-)
2010-02-10 07:43:25 +00:00
dak664
fe8417bd8a
Clarify defines for RF230 and effect on program size
2010-02-09 17:03:55 +00:00
dak664
282ffaf343
Add conditional boot messages and file logging
2010-02-09 14:43:16 +00:00
dak664
03c0245465
Expose httpd-cgi ipv6 address print to other modules
2010-02-09 14:41:18 +00:00
nifi
a6c6522548
Updated documentation for new APIs.
2010-02-09 08:29:58 +00:00
nifi
27d5e2338a
Added convenient flag to include codeprop
2010-02-09 07:34:37 +00:00
nifi
dbacc71c7d
Added missing uip-ipchksum when using IP
2010-02-09 07:04:11 +00:00
nifi
665c38e7f4
Set elfloader to use flash instead of ram for storage as default.
2010-02-09 06:52:26 +00:00
dak664
e12e794a74
QUEUEBUF fragmentation defines
2010-02-08 22:22:27 +00:00
adamdunkels
6414bf3a55
Enabled sicslowpan fragmentation and reassembly by default on the sky platform
2010-02-08 22:12:29 +00:00
dak664
1911dc4956
Defines for fragmentation handling
2010-02-08 22:09:25 +00:00
adamdunkels
590b4786c5
Added queuebuf statistics option, since it is used by the examples/rime/example-rudolph1.c code (on the netsim target)
2010-02-08 21:39:15 +00:00
nifi
978d383395
Corrected include path
2010-02-08 00:02:39 +00:00
nifi
9ee6406824
minor code style cleanup
2010-02-08 00:00:45 +00:00
adamdunkels
091483c150
Added dummy watchdog functions for all AVR platforms
2010-02-07 07:43:35 +00:00
joxe
1da7c3eccd
convert registers upto 9 instead of upto 4
2010-02-06 18:28:26 +00:00
adamdunkels
3717c39431
Updated the ext-sensor to use the new sensor API; patch by Jesper Karlsson
2010-02-06 14:41:24 +00:00
adamdunkels
aaab082f27
Correctly print out the aaaa: address, if enabled
2010-02-06 10:00:49 +00:00
adamdunkels
37f7770bd8
Made it possible to override the SICSLOWPAN_CONF_FRAG option. Increased the default uIP buffer size on IPv6 to provide some room for fragmented packets
2010-02-06 10:00:25 +00:00
nifi
d210d930fd
added missing end bracket
2010-02-05 16:45:56 +00:00
nifi
c67a4155d5
Changed to use tcpip_icmp6_event for ICMP notifications.
2010-02-05 15:16:02 +00:00
ksb
217eaaa071
Generic STM32F103 platform
2010-02-05 14:47:42 +00:00
nvt-se
32c5fcb583
avoid broadcast storms during the test
2010-02-05 11:52:37 +00:00
fros4943
b9bf06c2a7
decreased default cooja CFS size
2010-02-05 08:59:51 +00:00
c_oflynn
95d0b09954
-Fix that can cause USB stick to freeze up
...
-Add EEM Support
2010-02-04 10:40:00 +00:00
oliverschmidt
2a6f169e46
- Added yet another PETSCII->ASCII conversion, this time for the file name in case of a 404.
...
- Use all lowercase for the 404 message to avoid another PETSCII->ASCII conversion.
- Write logfile entries for all 404s.
- Adjust memory buffers on the C128 to accomodate for the items above.
2010-02-03 23:19:39 +00:00
