deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
7902 commits 6 branches 13 tags 80 MiB
Commit graph

827 commits

Author SHA1 Message Date
George Oikonomou
8699f7741d Fixed typos and a stray printf. Adjusted comments 2012-09-07 17:31:25 +01:00
Ivan Delamer
b43dad00b0 Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES 
#defines.
 2012-09-04 11:12:18 -06:00
Ivan Delamer
2e72ec3594 Place ATmega1281 define in correct section (it does have compare C 
unit, avoid duplicate define and compiler warning).
 2012-09-01 15:22:13 -06:00
Ivan Delamer
5636357243 Fix RF230 transition: RX_AACK_ON -> TX_ARET_ON (go through PLL_ON, 
as per datasheet). Tested on RF230 and 128RFA1 (RF231).
 2012-09-01 15:20:00 -06:00
George Oikonomou
26a87ee9cb Improved handling of cc2x3x rf_flags 2012-07-11 10:53:14 +01:00
George Oikonomou
43f2790357 Added channel_get() to the cc2x3x RF drivers 2012-07-11 10:53:14 +01:00
George Oikonomou
d66241fd97 Bugfixed the cc2530 LOW_POWER_RX configuration 
Report and fix by Tom Xiao
 2012-07-11 10:53:14 +01:00
George Oikonomou
62fbd389d8 Renamed a cc253x SFRX to stop namespace conflicts 
The TR0 SFRX can not use the name TR0 because it
conflicts with TCON.TR0 on the default 8051.

See SDCC bug 3513300
 2012-07-11 10:53:14 +01:00
George Oikonomou
4b73b48f60 Fixed the cc2530 RSSI adjustment 2012-07-11 10:53:14 +01:00
Ivan Delamer
17a62a649c ATmega128RFA1 bug fix: no interrupt pin used (embedded radio). 
Enabling interrupt caused MCU reset if using pin as GPIO.
 2012-07-10 14:36:47 -06:00
Niclas Finne
418a5772e6 Removed leds debug output 2012-06-07 10:35:22 +02:00
George Oikonomou
47db065034 Bugfixed the cc253x UART0 init (Thanks, Deng Jian) 
The flush instruction was resetting the stop bit level to 'low'
 2012-06-06 15:25:57 +01:00
David Kopf
e9a55cc222 Enable check on received length to prevent buffer overflow. Thank you Cooja! 2012-05-28 13:02:23 -04:00
George Oikonomou
259b497122 Minor Sensinode build cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou
1f7171f943 Adjust cc2x3x ports to the new clock API 2012-05-16 15:22:31 +01:00
George Oikonomou
0d4b90c42b cc2530 watchdog improvements and cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou
274a5ebb9c Fixed a typo which was preventing the cc253x watchdog from starting 2012-05-16 15:22:30 +01:00
Laurent Deru
56914963ef Reactivate flash protection after maca init 2012-05-09 10:24:38 -04:00
Mariano Alvira
a4813d815f use --gc-sections instead of -gc-sections 2012-05-06 12:19:20 -04:00
Mariano Alvira
4acad929f0 add gc-sections, roughly 4kB savings. 2012-05-06 09:24:06 -04:00
David Kopf
d6dc216e02 Reorder includes to prefer platform routines. Remove redundant RPL define. 2012-04-27 16:54:09 -04:00
George Oikonomou
dd26accc07 We can now use SDCC's __nonbanked feature 
This allows us to reduce CODE footprint of SDCC projects
built with --model-huge. Use carefully!

* Added a facility which allows us to enable/disable the
  feature from the CPU dir (CC_CONF_NON_BANKED_OPTIMIZATION)
* Added the CC_NON_BANKED keyword to some platform files
  (expands to __nonbanked)
* Started using this for some examples
 2012-04-26 15:28:43 +01:00
Adam Dunkels
b85bc3379c Bugfix in clock_wait() declaration. Various style fixes. 2012-04-22 20:54:29 +02:00
George Oikonomou
e95f94a9a8 Added support for reading MAC from the cc253x flash 
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
 2012-04-20 16:03:38 +01:00
George Oikonomou
29090a3dda The cc253x Makefile specifies SoC flavor 
This will help us slowly add better support for smaller SoCs
instead of just assuming that all cc253x SoCs are F256

- We build for F256 by default but the project Makefile can override this
- We currently ignore this when passing --code-size. This is a ToDo
- The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant
 2012-04-20 16:03:38 +01:00
George Oikonomou
6fb48174ba Fixed a documentation typo 2012-04-20 16:03:37 +01:00
Niclas Finne
1b13b69814 Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611 2012-04-10 16:05:10 +02:00
Niclas Finne
57a166c3db Corrected compiler flags for the IAR compiler 2012-04-10 15:27:44 +02:00
David Kopf
cac4e9a222 Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t. 
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
 2012-04-09 15:49:53 -04:00
David Kopf
40bd020394 Fix wrong register addresses. 2012-04-09 09:58:12 -04:00
George Oikonomou
57969259ce cc2x3x clock_delay(len) now delays for approx. len usecs 2012-04-03 16:26:11 +01:00
George Oikonomou
3cb26adeda Added an ASM(foo) macro for cc243x 2012-04-03 16:26:11 +01:00
George Oikonomou
242e02658f The cc2530 UART driver was sending a 0 down the line on init 2012-04-03 16:26:10 +01:00
George Oikonomou
b3de052e01 Ported the stack-friendly clock ISR code over from cc243x to cc253x 2012-04-03 16:26:10 +01:00
George Oikonomou
11a7f644ac Comment rewording and formatting 2012-04-03 16:26:10 +01:00
George Oikonomou
ce17fa131c Stack-friendly cc243x clock ISR enabled by default 
This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate
as originally thought. In fact, it has pretty much the same
accuracy as the old, stack-hungry version.

* Renamed the define from CLOCK_CONF_ACCURATE (1: old) to
  CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying
  that one is more accurate than the other.
* Using CLOCK_CONF_STACK_FRIENDLY by default.
 2012-04-03 16:26:10 +01:00
George Oikonomou
924fe934c1 Deleted obsolete macros. Minor formatting 2012-04-03 16:26:10 +01:00
George Oikonomou
ffa3a1c4c3 cc2x3x clock driver cleanup 
* Bit-Addressable SFRs are now accessed as such,
  instead of (N)OR-ing the byte
* A routine was declared as CCIF but not defined as such. Fixed
* Deleted a leftover duplicate define
* Formatting
* Comment updates and clarifications
 2012-04-03 16:26:10 +01:00
simonduq
930c7c25bc fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file, 
more printouts in main when ipv6 is used, and a target for memory
profiling taking stm's gnu.ld static stack size into account
 2012-04-03 11:47:30 +02:00
George Oikonomou
5240519dd9 Renamed a config define to better match contiki's naming philosophy 2012-04-02 11:38:54 +01:00
George Oikonomou
bce34e4b9a For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir. 
The value is not really configurable by the platform so having it
in contiki-conf.h didn't make huge sense.
 2012-04-02 11:22:19 +01:00
George Oikonomou
d958ee3125 Deleted the old Sensinode 'read mac from flash' routine. 
Since the introduction of a purpose-written routine, the old
generic one (which was written in asm) was never being used.
There was a configuration directive which allowed us to switch
between the two. All references to this configuration directive
have also been removed.
 2012-04-02 11:21:32 +01:00
George Oikonomou
5d8f63a61b We've not been using the cc2430 converter for a while now 2012-04-02 11:03:49 +01:00
George Oikonomou
7854ee499a Wrapped cc2x30 SOFT_RESET() macro inside do {...} while(0) 2012-03-29 13:11:04 +01:00
George Oikonomou
5afdd19403 Adjusted check to determine if we are being built with SDCC 
Since rev #7342, SDCC defines __SDCC_mcs51 instead of SDCC_mcs51.
We check for either
 2012-03-29 13:10:25 +01:00
George Oikonomou
4f1e251603 Some uN_t had crept back in cc2530dk and sensinode. 
Changed to uintN_t plus a bit of code formatting
 2012-03-29 13:10:10 +01:00
simonduq
946f00bf7b stm32w: added ability to upload and reset all connected boards, and login using MOTE=x 2012-03-26 23:00:44 +02:00
simonduq
95ae5c5d51 avoid unnecessary symbols.c/h copying 2012-03-26 23:00:43 +02:00
George Oikonomou
ad256e5014 New platform: TI cc2530 Development Kit 
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
 2012-03-23 14:41:07 +00:00
George Oikonomou
b7674c3636 Reincarnate the sensinode/cc2430 port 2012-03-23 14:41:07 +00:00