Niclas Finne
4630945475
Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms
2012-09-19 22:49:19 +02:00
Fredrik Osterlind
d270e4943d
bugfix: slip must be initialized after ctimer, as it uses ctimers
2012-05-30 12:59:42 +02:00
Fredrik Osterlind
4cf4a48592
minor bugfix: did not compile with PROCESS_CONF_NO_PROCESS_NAMES=1
2012-05-09 15:07:51 +02:00
Niclas Finne
40595ad5c7
Support for serialdump on MacOS X. Patch by Laurent Deru.
2012-05-07 13:16:27 +02:00
Laurent Deru
cc863e7bd4
Sky motelist support for MacOS X
2012-05-07 11:18:09 +02:00
Niclas Finne
1b13b69814
Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611
2012-04-10 16:05:10 +02:00
Niclas Finne
ff7a977dc7
Improved support for the IAR compiler for the MSP430 platforms
2012-03-07 23:09:05 +01:00
Niclas Finne
569477b10c
contiki-sky-platform is added by Makefile.sky
2012-03-07 23:07:57 +01:00
Niclas Finne
684c3edfa6
Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood.
2012-03-07 23:04:52 +01:00
Ilya Dmitrichenko
4b60851527
Missed ifeq ...
2012-02-25 10:09:35 -05:00
Ilya Dmitrichenko
9c99d46e24
Simplified host OS platform detection in Makefiles
2012-02-25 10:09:33 -05:00
Adam Dunkels
465c401cdc
Reduce size of the neighbor table entries to make RPL fit into the Tmote Sky RAM.
2012-01-18 06:15:38 -08:00
Adam Dunkels
6185da7b80
Default to SMALL unless otherwise specified, to get size of binaries smaller so that Contiki with RPL/IPv6 fits on the Tmote Sky again.
2012-01-18 06:13:17 -08:00
Niclas Finne
05b10eb9ce
Initial WiSMote port based on code from Arago Systems.
2012-01-09 12:25:06 +01:00
Niclas Finne
367c82a5ab
added compiler flags and macros for IAR and mspgcc 4.4.5 compilers
2012-01-09 12:24:33 +01:00
Matthias Kovatsch
36763cabbd
Introduced PLATFORM_HAS_LIGHT, _BATTERY, and _SHT11.
2011-12-07 20:47:31 +01:00
nvt
4f3528f7ed
Move compower configuration out of the non-IPv6 conditional clause.
2011-10-10 22:11:29 +02:00
simonduq
dd8576830e
Added bursts support in CSMA/ContikiMAC, and CFS-swapping in
...
queuebuf. Exemplified in examples/udp-stream.
2011-09-27 16:47:03 +02:00
Joakim Eriksson
5b1d9617c4
moved io and signal and IAR-GCC checks from driver files into contiki include file
2011-09-26 10:38:41 +02:00
Joakim Eriksson
95dde73618
fixed Sky platform for IAR compiler
2011-09-11 17:18:02 +02:00
Adam Dunkels
a06cf93e4c
Made the sky and z1 platform handling of PROJECT_CONF_H the same as the other platforms: the makefile should define PROJECT_CONF_H to be the name of the header file to include. This header file should #undef everything it #defines, as it is included after all the other configuration options in contiki-conf.h
2011-09-05 11:46:15 +02:00
Adam Dunkels
ee75ec3ced
Be a little more conservative in terms of what headers not to compress
2011-09-05 11:41:41 +02:00
Adam Dunkels
6c607b702a
Use the SICSLOWPAN_CONF_COMPRESSION_THRESHOLD to avoid compressing IPv6 packets smaller than 60 bytes. This allows us to use ContikiMAC without its header, making it 802.15.4 compliant again.
2011-09-02 13:52:19 +02:00
Adam Dunkels
8962136b1a
Added a motelist target that is the same on both sky and z1
2011-07-29 13:06:00 +02:00
Niclas Finne
1d07330ac0
Made the platform config file configurable.
2011-07-01 17:16:12 +02:00
Niclas Finne
374722b2e0
Added resource definition for leds and button
2011-05-20 14:27:53 +02:00
Enric M. Calvo
aba380b960
removed modif. to sky files
2011-03-25 17:57:17 +01:00
Enric M. Calvo
1716d837fc
Merge branch 'master' of git://contiki.git.sourceforge.net/gitroot/contiki/contiki into master_cleanup
...
Makefile.z1 is broken into .common and .z1 to share it with Z1 Starter Platform
Conflicts:
.gitignore
platform/z1/Makefile.z1
2011-03-25 17:46:38 +01:00
Niclas Finne
ccc1687319
Made energest configuration configurable
2011-03-21 21:28:43 +01:00
Niclas Finne
a199ae920e
Changed the order in which io.h and signal.h is included. Some versions of mspgcc4 seem to have a problem when signal.h is included before io.h.
2011-03-07 20:54:02 +01:00
Enric M. Calvo
0c6fd04f44
Modified contiki-conf.h and added sensys-scanner.
2011-03-03 13:44:28 +01:00
Lionel Debroux
5cb49e8b07
Several compiler warning fixes:
...
* msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h;
* sky: fix a couple pointer target signedness warnings;
* core: fix several signed/unsigned comparison warnings;
* framer-802154: "const static" -> "static const" to fix compiler warnings;
* core: comment or remove unused variables and function definitions.
Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Mariano Alvira <mar@devl.org>
2011-02-20 19:28:14 -05:00
Fredrik Osterlind
747eafd5f0
support for tinyos style node ids, to simplify testbed experiments
...
with automatic node ids
2011-02-11 15:27:14 +01:00
Nicolas Tsiftes
39ea9405bb
Added a function for setting the I/O semantics on a Coffee file descriptor. Changed the configuration parameters slightly and updated the platform definitions to reflect this change.
2011-02-09 15:03:57 +01:00
nvt-se
9ad02dbdd8
Removed header inclusion
2011-01-18 14:58:39 +00:00
nvt-se
28421f1fe2
Removed watchdog calls from Coffee
2011-01-18 14:06:33 +00:00
nvt-se
00ac8cfaa0
Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up
2011-01-18 14:03:55 +00:00
adamdunkels
34f2d3e025
Disable timesynch by default - it is not well-tested enough yet.
2011-01-09 21:04:14 +00:00
adamdunkels
a6fe42f60f
Restart CC2420 SFD interrupt after DCO calibration only if it is enabled.
2011-01-09 21:03:42 +00:00
joxe
2e1c856741
added support for avoiding sleeping in LPM3 when DCO needs to be running - needed for uart DMA
2011-01-05 12:04:23 +00:00
adamdunkels
e55c3cd471
Enable DCO configuration override
2010-12-16 22:52:27 +00:00
adamdunkels
37e65264a8
Hack: reenable cc2420 SFD interrupts after resyncing the DCO. The DCO code currently messes up the SFD interrupt settings.
2010-12-16 22:52:12 +00:00
adamdunkels
6a80106236
Turn on timesynch by default
2010-12-16 22:51:22 +00:00
nvt-se
404230a047
Added a macro for portable watchdog calls.
2010-12-15 14:01:07 +00:00
fros4943
0a8d898678
#ifndef'd elfloader's default memory usage
2010-11-11 13:56:02 +00:00
adamdunkels
896f627290
Made uIPv6 packet queueuing configuration configurable
2010-11-02 11:06:01 +00:00
joxe
dfff488a3d
configured tmote sky to use 5 retransmissions
2010-10-26 13:26:16 +00:00
adamdunkels
726bd0e58e
Made collect neighbors, queuebuf number, uip-ds6 configuration settable through project-conf.h
2010-10-24 21:12:31 +00:00
joxe
a1e7d9c256
fixed some config params to avoid re-defining if already defined
2010-10-21 18:25:39 +00:00
adamdunkels
37a4200f40
Made a lot of things configurable via the (optional) project-conf.h
2010-10-20 22:21:16 +00:00
nifi
9a4d17fe7c
Bug fix: put device in standby mode at startup in case it has previously been put in deep power-down mode; patch by Martin Bor
2010-10-12 22:55:11 +00:00
adamdunkels
93f6fda353
Updated configuration options to reflect recent changes. Increased number of queuebufs. Corrected the name of the collection neighbors option.
2010-10-03 20:40:42 +00:00
nifi
14873a923b
Added temperature sensor for the builtin temperature sensor in MSP430
2010-08-25 19:34:06 +00:00
nifi
198db63c3b
Moved the ADC configuration to sky-sensors.c and sensors now only need to specify their sample channel. This helps to avoid conflicts when using multiple sensors.
2010-08-25 19:30:52 +00:00
joxe
b04ebb2b29
minor fix for making the msp430 makefile work for msp430X arch
2010-08-24 16:24:11 +00:00
joxe
80942abaf7
split hw config into platform-conf and adapted to new SPI and CC2420 naming
2010-06-23 10:18:05 +00:00
joxe
f758f6569e
moved cc2420 config to platform config
2010-06-21 19:57:18 +00:00
adamdunkels
f81ca85157
Increase the size of the route and neighbor tables; remove the uIP packet buffer queue for every neighbor to save RAM
2010-06-14 07:04:20 +00:00
nifi
eb63cb21e0
Added make variable with command name to show in warning
2010-05-27 12:42:48 +00:00
joxe
97fc9d2ee8
no aaaa address if configured for RPL
2010-05-25 21:32:41 +00:00
joxe
50cca91d93
made use of the new link-local address api in ds6
2010-05-09 17:53:31 +00:00
nifi
4aba60ad25
acc-sensor and ext-sensor moved to the jcreate platform
2010-05-06 13:55:21 +00:00
nifi
7cebc4ed99
added missing include
2010-05-03 13:55:26 +00:00
nifi
bf198ec695
Moved sensors setup to contiki-sky-platform.c and common make rules to Makefile.common for easier reuse in similar platforms
2010-05-03 13:51:11 +00:00
joxe
aa980e3f67
removed initialization of RPL from platform main
2010-05-01 13:07:31 +00:00
joxe
3c9256c39f
removed RPL routing state struct from platform config file
2010-05-01 12:04:13 +00:00
nvt-se
d529132002
Added missing parts of the RPL configuration
2010-04-30 15:06:00 +00:00
joxe
b0640af3a2
added rpl support for tmote sky - enabled by default
2010-04-30 13:52:14 +00:00
fros4943
170e4d6a99
sky simulation bug workaround: explicit write to compare register wakes up timer scheduling again
2010-03-31 13:15:32 +00:00
fros4943
e640c61b78
commented unused functions
2010-03-29 12:57:57 +00:00
fros4943
540f30d855
improved support for checkpointing operations via serial, several minor fixes
2010-03-29 09:48:06 +00:00
joxe
29335f2f7d
added possibility to hard-code 7 bytes of the MAC address - last byte picked from nodeid
2010-03-19 14:08:15 +00:00
adamdunkels
fc61ee5dbb
Bugfix: turn on watchdog before starting processes to avoid a process hanging in its startup phase
2010-03-19 13:28:27 +00:00
adamdunkels
91afe5b0f4
Turned on broadcast announcements by default, turn on announcements for collect
2010-03-19 13:27:46 +00:00
joxe
7d220c910a
removed uip_router
2010-03-16 15:45:20 +00:00
nifi
0299aab5e4
Fixed to use sky-sensors to setup ADC12
2010-03-15 23:37:01 +00:00
joxe
fd3d6c44d0
integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling
2010-03-15 16:41:24 +00:00
fros4943
f36cfffc99
Makefile target for uploading precompiled firmware, example:
...
make upload-ihex FILE=myfile.ihex
2010-03-10 11:46:57 +00:00
nifi
1025e7337c
Added configurable router module
2010-03-01 14:46:57 +00:00
nifi
5e43a6998b
Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.
2010-03-01 13:30:21 +00:00
joxe
80b289f7c1
updated sky platform for new sicslowpan
2010-02-25 15:51:37 +00:00
nifi
07ee8458e7
Fixed bootup printf() with 32-bit timer values
2010-02-23 21:02:30 +00:00
nifi
bb9d430138
added bootup print of NETSTACK_RDC name
2010-02-23 20:54:09 +00:00
adamdunkels
85a9f7db42
Fix bootup printf() with 32-bit timer values
2010-02-23 18:45:16 +00:00
adamdunkels
eadfe5f3d6
Enabled 32-bit clock ticks to allow longer timeouts; experimentally disabled polite announcements in favour of a non-announcement based collect protocol
2010-02-23 18:44:52 +00:00
adamdunkels
e34eb54960
A work-in-progress rework of the Contiki MAC and radio layers. The
...
main ideas are:
* Separates the Contiki low-layer network stack into four layers:
network (e.g. sicslowpan / rime), Medium Access Control MAC
(e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
that specify what mechanism/protocol/driver to use at the four
layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
the fate of a transmitted packet: if the packet was not possible to
transmit, the cause of the failure is reported, and if the packets
was successfully transmitted, the number of tries before it was
finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
efficient radio duty cycling protocols: channel check, pending
packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
#defines.
2010-02-18 21:48:39 +00:00
joxe
3a2eec2b1a
fixed ext-sensor for jcreate
2010-02-13 11:20:48 +00:00
adamdunkels
6414bf3a55
Enabled sicslowpan fragmentation and reassembly by default on the sky platform
2010-02-08 22:12:29 +00:00
nifi
978d383395
Corrected include path
2010-02-08 00:02:39 +00:00
joxe
1da7c3eccd
convert registers upto 9 instead of upto 4
2010-02-06 18:28:26 +00:00
adamdunkels
3717c39431
Updated the ext-sensor to use the new sensor API; patch by Jesper Karlsson
2010-02-06 14:41:24 +00:00
adamdunkels
aaab082f27
Correctly print out the aaaa: address, if enabled
2010-02-06 10:00:49 +00:00
adamdunkels
37f7770bd8
Made it possible to override the SICSLOWPAN_CONF_FRAG option. Increased the default uIP buffer size on IPv6 to provide some room for fragmented packets
2010-02-06 10:00:25 +00:00
nifi
18f5ef71f0
added missing include
2010-02-03 20:30:07 +00:00
adamdunkels
a9c742402c
Use cxmac for IP, xmac for non-IP. Increased uIP buffer size for IPv6 to accomodate ICMP packets
2010-02-03 16:48:04 +00:00
adamdunkels
f9e991c0dd
Turning of the MAC protocol in the IPv4-over-mesh actually made performance worse due to broadcasts being received multiple times, which interfered with SLIP I/O
2010-02-03 01:20:47 +00:00
joxe
09c3ba2753
minor cleanup
2010-02-02 21:17:44 +00:00
joxe
fd4aebdf7f
refactored some ADC code into sky-sensors and made it possible to turn off sensors to save energy
2010-02-02 20:59:45 +00:00
adamdunkels
88fb1c80c9
Do not activate the sensors by default: sensors should be activated by the applications that need them
2010-02-02 16:25:30 +00:00
adamdunkels
d0d52638b8
Disable (debugging-) initialiation of aaaa:: address; add CSMA MAC for IPv6/6lowpan
2010-02-01 11:55:04 +00:00
