Mariano Alvira
|
6309b16235
|
config is in config.h now
|
2010-02-26 14:22:28 -05:00 |
|
Mariano Alvira
|
64824b4ebc
|
place all the config into config.h
|
2010-02-26 14:21:46 -05:00 |
|
Mariano Alvira
|
87cd9c7a36
|
update build system for board specific code that's 'local' to the
program you are building.
update tests to consolidate common code.
|
2010-02-26 14:04:10 -05:00 |
|
Mariano Alvira
|
a791be393b
|
update nvm-write
|
2010-02-26 13:03:37 -05:00 |
|
Mariano Alvira
|
8f6e672cc0
|
fix warnings
|
2010-02-26 12:53:21 -05:00 |
|
Mariano Alvira
|
9a8004c177
|
working on nvm-read.
fixed lib ordering on link command
|
2010-02-26 12:37:13 -05:00 |
|
Mariano Alvira
|
59dca22769
|
clean up default_vreg_init
|
2010-02-26 07:30:53 -05:00 |
|
Mariano Alvira
|
0c4f5c61ef
|
need a way to run board specific lowlevel inits
like for vreg. this is a start.
|
2010-02-24 18:47:53 -05:00 |
|
Mariano Alvira
|
637c9ddab2
|
cleaned up uart1-loopback
|
2010-02-24 14:45:45 -05:00 |
|
Mariano Alvira
|
289a839161
|
finish blink tests
|
2010-02-24 13:35:37 -05:00 |
|
Mariano Alvira
|
f79c71153a
|
now running just 'make' builds all the targets for all the boards.
|
2010-02-23 18:54:50 -05:00 |
|
Mariano Alvira
|
dc9473a228
|
cleanup main makefile
|
2010-02-23 18:27:12 -05:00 |
|
Mariano Alvira
|
95dccba797
|
update blinks
|
2010-02-23 18:19:38 -05:00 |
|
Mariano Alvira
|
8ca9a0269e
|
better variable defs.
touch objdir to fix problem where board.h would try to get created
after it's already been created.
|
2010-02-23 18:14:32 -05:00 |
|
Mariano Alvira
|
59391d7529
|
board.h works now
|
2010-02-23 15:53:00 -05:00 |
|
Mariano Alvira
|
3cc6896981
|
fix blink-red
|
2010-02-23 15:52:46 -05:00 |
|
Mariano Alvira
|
1522b72b1e
|
clean up gpio and leds
|
2010-02-23 15:16:12 -05:00 |
|
Mariano Alvira
|
dcc2d5299c
|
for now you must define BOARD.
I'd like it to be though that if board isn't defined then it makes
everything.
|
2010-02-22 19:18:48 -05:00 |
|
Mariano Alvira
|
1759ff01a0
|
getting there...
|
2010-02-21 18:47:12 -05:00 |
|
Mariano Alvira
|
5adb6413d7
|
Hi Mar.
|
2010-02-21 17:34:27 -05:00 |
|
Mariano Alvira
|
948478193e
|
checkpoint
|
2010-02-21 10:25:22 -05:00 |
|
Mariano Alvira
|
8c17fc36d1
|
starting libmc1322x.a
|
2009-12-15 14:18:48 -05:00 |
|
Mariano Alvira
|
e340e234c6
|
clean up
|
2009-11-04 17:30:18 -05:00 |
|
Mariano Alvira
|
d247a613b7
|
Not all pins default to GPIO. Setting func_sel to 3 enables GPIO for
each pin. Do this.
|
2009-09-17 16:11:19 -04:00 |
|
Mariano Alvira
|
16f680544c
|
adding a test that blinks all the GPIO --- good for testing soldering
jobs.
|
2009-09-07 14:39:48 -04:00 |
|
Mariano Alvira
|
611370fe58
|
removing the old hardcoded type stuff from flasher.
doesn't seem to be a problem.
Signed-off-by: Mariano Alvira <mar@devl.org>
|
2009-08-06 09:56:47 -04:00 |
|
Mariano Alvira
|
3d7125e2a9
|
put rftests back to channel 11
Signed-off-by: Mariano Alvira <mar@devl.org>
|
2009-08-04 10:54:23 -04:00 |
|
Mariano Alvira
|
e1059a9b15
|
updated to use the leds on the RedBee hardware and made it a little more general.
Signed-off-by: Mariano Alvira <mar@devl.org>
|
2009-06-22 12:35:39 -04:00 |
|
Mariano Alvira
|
bf9e762a81
|
moved crm addresses to crm.h
|
2009-05-27 15:05:25 -04:00 |
|
Mariano Alvira
|
0696772202
|
more current data with hobby board. 32kHZ mode doesn't seem to use
much more power than 2kHz.
|
2009-05-21 17:30:00 -04:00 |
|
Mariano Alvira
|
34c91a6726
|
this code starts up the 32kHZ clock
|
2009-05-21 14:52:27 -04:00 |
|
Mariano Alvira
|
9f075dcf1a
|
cause TX_ON to flash when transmitting
|
2009-05-20 20:12:39 -04:00 |
|
Mariano Alvira
|
d8a8d529bc
|
Sleep works now. Make sure to turn the radio off first.
|
2009-05-12 17:19:57 -04:00 |
|
Mariano Alvira
|
13656da889
|
corrected comments about ram retention
|
2009-05-11 17:26:10 -04:00 |
|
Mariano Alvira
|
5dbd9aa02f
|
added a few comments
|
2009-05-11 17:03:20 -04:00 |
|
Mariano Alvira
|
4ca63b9b86
|
this test demonstrates sleeping in both hibernate and doze.
wake up is controlled with the wake up timer.
read the comments for current measurments.
|
2009-05-11 17:01:31 -04:00 |
|
Mariano Alvira
|
bc59b04bbf
|
sleep tests.
|
2009-05-11 15:52:30 -04:00 |
|
Mariano Alvira
|
cb4dd0d23e
|
reverting this file back to dumping the calibration section.
|
2009-05-09 15:48:02 -04:00 |
|
Mariano Alvira
|
706da17807
|
clean up and flash type workaround.
|
2009-05-09 15:30:54 -04:00 |
|
Mariano Alvira
|
2783ad26f0
|
clean up debug.
|
2009-05-09 14:55:48 -04:00 |
|
Mariano Alvira
|
a0db791175
|
add support for extra write data string.
|
2009-05-09 14:43:17 -04:00 |
|
Mariano Alvira
|
cd973de335
|
catch the aux. send.
still need to parse it for something like:
0x1e000,0x11223344,0x55667788
|
2009-05-08 18:04:55 -04:00 |
|
Mariano Alvira
|
3bea9ac2f0
|
this version of flasher works.
|
2009-05-08 17:27:24 -04:00 |
|
Mariano Alvira
|
c0b912dca2
|
flash and burn
completely untested.
|
2009-05-08 12:32:14 -04:00 |
|
Mariano Alvira
|
102149cd91
|
change write address to be the same as what I'm using as my RIME
address.
|
2009-05-05 16:25:46 -04:00 |
|
Mariano Alvira
|
d231cd0120
|
this version of nvm-write works because it erases the sector first
before writting it.
|
2009-05-05 15:18:28 -04:00 |
|
Mariano Alvira
|
b6eb7ca6ff
|
send big packets.
|
2009-05-03 18:50:47 -04:00 |
|
Mariano Alvira
|
c0bb4cb810
|
slight timer cleanup
|
2009-04-24 17:07:15 -04:00 |
|
Mariano Alvira
|
d869766664
|
using weak links for individual isrs
|
2009-04-24 16:04:04 -04:00 |
|
Mariano Alvira
|
f421cde7f8
|
changed tmr test to blink purple
|
2009-04-22 16:11:32 -04:00 |
|