adamdunkels
50e1452564
Ugly workaround for internal error in mspgcc when applying the >= operator to two 32-bit values
2010-02-23 18:40:08 +00:00
adamdunkels
0c4c88ae66
Improved per-packet power profiling: if a packet is retransmitted, the new energy is added to the old energy so that it is possible to measure the full energy for all transmissions of the packet
2010-02-23 18:39:00 +00:00
adamdunkels
ca0417a923
Added the MAC layer callback functionality so that the Rime network layer gets information from the MAC about the status of sent packets: were they successfully transmitted, or was there a collisions? How many retries were there?
2010-02-23 18:38:05 +00:00
adamdunkels
f10eedab3e
Added debug printout
2010-02-23 18:37:15 +00:00
adamdunkels
2d13fecea7
Improved backoff management: timer is now doubled on every transmission, until the using module calls the neighbor_discovery_start() function again. Don't cancel the transmission even if a lower value arrives (this fixes a problem with multi-hop ETX propagaion).
2010-02-23 18:36:50 +00:00
adamdunkels
0eade2886c
Better loop handling: when a loop is detected, the neighbor to which the packet was originally sent gets an inflated ETX; made sure that collect without announcments work; increased timeouts, to work nicer in larger networks
2010-02-23 18:35:23 +00:00
adamdunkels
a4d9d6651b
Added the option to specify the old value to observers so that they can determine if the announcement should be sent out quicklier than otherwise
2010-02-23 18:32:44 +00:00
adamdunkels
b746b7fc06
Reworked the Rime/Chameleon interface so that packets now always hit Rime before Chameleon. Chameleon is now only called by Rime. This makes packet sniffing easier, and allows for sniffing packets after their header has been processed by Chameleon, thereby making per-packet power profiling much easier to implement
2010-02-23 18:29:53 +00:00
adamdunkels
d8cce42d28
Set the default radio driver to nullradio
2010-02-23 18:28:04 +00:00
adamdunkels
47578806b5
Removed semicolon from #define to allow the semicolon to be placed naturally after the macro is used
2010-02-23 18:27:04 +00:00
adamdunkels
4b04fdd328
Minor style fix
2010-02-23 18:26:26 +00:00
adamdunkels
1ee32c3074
Removed non-functional time synchronization code; added some experimental code for CCA checks (enabled CCA mode 1, a temporary development function for setting the CCA threshold); enable the possibility to switch off radio even if a packet is currently arriving
2010-02-23 18:24:49 +00:00
adamdunkels
c4c4e8164d
Enabled compilation without timesynch enabled
2010-02-23 18:22:44 +00:00
adamdunkels
2186d70c59
Added per-packet power profile tracing
2010-02-23 18:22:16 +00:00
adamdunkels
5292005962
A null radio driver that does not do anything - useful in the native port and as a template for new radio drivers
2010-02-23 18:18:53 +00:00
dak664
e695e4860d
Allow build with original radio driver using $make RF230BB=0
2010-02-23 17:43:20 +00:00
dak664
7274f1d1ed
Report operating channel with either radio driver
2010-02-23 17:40:09 +00:00
dak664
4ded42db1e
Add sniffer and 802 frame reporting
2010-02-23 17:37:51 +00:00
dak664
64d57a3dd8
Update jackdaw to new radio driver interface
2010-02-23 17:35:49 +00:00
dak664
a64a8674bc
Remove debug print
2010-02-23 02:22:25 +00:00
dak664
b4bc7fc3da
Make RF230BB the default radio driver
2010-02-23 02:01:46 +00:00
dak664
cbb8621e30
update to new driver format
2010-02-22 22:23:18 +00:00
dak664
658c35df11
remove debug printf
2010-02-22 22:21:15 +00:00
fros4943
dbd1cd7b08
show contiki stack trace in error dialog, not just print to console
2010-02-21 21:50:58 +00:00
adamdunkels
5e6fd67213
Powertrace: a program that periodically prints out the power consumption; suitable for experiments or simulations that want to measure power consumption
2010-02-20 14:15:45 +00:00
adamdunkels
60425aa355
ESB uses tr1001 radio
2010-02-18 23:53:21 +00:00
adamdunkels
0b2b7bcdba
Removed inadvertedly left-over include file
2010-02-18 23:52:34 +00:00
adamdunkels
fa4d4db329
Use the common netstack_init
2010-02-18 23:19:03 +00:00
adamdunkels
5cf3b83733
Common initialization code for the netstack
2010-02-18 23:15:26 +00:00
adamdunkels
927aa821c3
Updated to new MAC api
2010-02-18 23:10:06 +00:00
adamdunkels
a2664054c5
Always include netstack.h
2010-02-18 23:09:30 +00:00
adamdunkels
459c550cbd
Updated to match the new netstack api
2010-02-18 23:04:54 +00:00
adamdunkels
51980f0be4
CC2420_CONF_AUTOACK is now defined in contiki-conf.h
2010-02-18 23:03:36 +00:00
adamdunkels
953a8c2015
Turn off timer before updating - needed to avoid bugs in ContikiMAC - not 100% sure why
2010-02-18 22:15:54 +00:00
adamdunkels
f49ebfe1c4
Temporarily disabled rime route udp because it breaks with newest MAC interfaces
2010-02-18 21:53:08 +00:00
adamdunkels
e34eb54960
A work-in-progress rework of the Contiki MAC and radio layers. The
...
main ideas are:
* Separates the Contiki low-layer network stack into four layers:
network (e.g. sicslowpan / rime), Medium Access Control MAC
(e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
that specify what mechanism/protocol/driver to use at the four
layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
the fate of a transmitted packet: if the packet was not possible to
transmit, the cause of the failure is reported, and if the packets
was successfully transmitted, the number of tries before it was
finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
efficient radio duty cycling protocols: channel check, pending
packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
#defines.
2010-02-18 21:48:39 +00:00
oliverschmidt
1817acae15
Now that the C64 mouse driver works we can activate the mouse support for this target :-)
2010-02-18 21:30:31 +00:00
adamdunkels
f8c804e28b
ntikiMAC: a new radio duty cycling mechanism that uses a combination
...
of link-layer and MAC-layer mechanisms to achieve a very low power
consumption: during idle listening the radio is switched off between
99.2% and 99.6% of the time. One unicast transmission typically adds
between 0.07% and 1.2% additional radio time, depending on packet
size.
ContikiMAC uses the standard IEEE 802.15.4 message format and adds no
additional headers.
ContikiMAC is simple: it uses periodic two-shot channel sampling
during idle listening to keep the radio on-time down. Transmissions
are done with repeated transmissions until a link-layer ACK is
received.
2010-02-18 21:26:15 +00:00
adamdunkels
e18f739f04
Fixed compilation without timesynch compiled in
2010-02-18 21:02:30 +00:00
adamdunkels
f5c48751b5
Reworked 802.15.4 header creation and parsing so that it works regardless of the size of the rimeaddr_t typedef
2010-02-18 21:00:28 +00:00
adamdunkels
2fbf21b2b3
Refactored the phase optimization functionality into a separate module
2010-02-18 20:58:59 +00:00
adamdunkels
6b523f2446
Fixed compilation without timesynch compiled in
2010-02-18 20:56:12 +00:00
dak664
6df1e0ca58
add experimental cxmac code
2010-02-18 17:24:12 +00:00
dak664
38c5922294
experimental cxmac code
2010-02-18 17:23:19 +00:00
dak664
a83381de30
add rtimers for cxmac
2010-02-18 17:21:44 +00:00
dak664
fee5efb141
additions for cxmac
2010-02-18 17:20:50 +00:00
joxe
470b93c79f
added mote attributes to various types of motes
2010-02-18 11:13:20 +00:00
joxe
19c75b30e0
added the MoteAttributes interface for handling mote printouts of #A x=y
2010-02-18 11:06:37 +00:00
adamdunkels
333c14e734
New version of MSPsim from the MSPsim SVN, with support for CC2420 auto ACKs
2010-02-17 18:51:59 +00:00
dak664
72e1528ea7
Make sicslowmac the default!
2010-02-16 23:42:06 +00:00
