deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
10273 commits 6 branches 13 tags 80 MiB
Commit graph

221 commits

Author SHA1 Message Date
Ivan Delamer
57e686179c Improved rf230bb.c synchronization/locking. Removed unnecessary locks 
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
 2012-02-01 13:37:45 -07:00
David Kopf
7ca141b457 Access uart registers directly instead of through intermediate addresses in a RAM struct. 
Add a platform define to reduce the number of ports supported by the cpu.
 2012-01-21 13:49:58 -05:00
David Kopf
58298f59db Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal 
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
 2012-01-10 12:42:27 -05:00
David Kopf
81af871db9 Bugfix: use 16 bit tick count to adjust clock after sleep 2011-12-01 09:58:55 -05:00
David Kopf
fb977cb9ef Better fix for hardware FCS error on JTAG reset 
Correct silly error introduced by trying to save two bytes.
 2011-11-15 13:24:58 -05:00
David Kopf
31ba84eb75 Improve rf23x cca procesing 
Fix delay_loop timing bug by using long long calculation.
128rfa1 and rf230 both working with contikimac RDC
 2011-11-14 11:49:58 -05:00
David Kopf
d1cd3f213c Add general unsupported interrupt vector suggested by Daniel Willmann 2011-11-14 11:36:18 -05:00
David Kopf
6eba721af1 Add rtimer_arch_sleep function, enabled with RDC_CONF_MCU_SLEEP 2011-11-14 11:10:35 -05:00
David Kopf
c2364897f8 atmega128rfa1 cca fixes, energest and rimestat macros. 
Add option to return ACK to RDC layer when in extended mode, based on Georg von Zengen code.
 2011-11-08 12:20:22 -05:00
David Kopf
f721f646fa Adjust sleep time by ticks instead of seconds, proposed by Ivan Delamer 2011-09-10 12:44:49 -04:00
David Kopf
dfdae5b02b This fixes commit 9a1ce7 for spaces instead of .... 2011-08-31 12:08:01 -04:00
David Kopf
470887eddd Print elf size if ELF_SIZE is defined 2011-08-31 11:50:14 -04:00
David Kopf
9a1ce7cf75 Use enumerated tx return values 2011-08-31 11:40:23 -04:00
David Kopf
5f2b2074f0 Implement WITH_RPL option in makefile 2011-08-28 16:11:48 -04:00
David Kopf
bdec65b889 Fix typos and file endings 2011-08-28 16:04:36 -04:00
David Kopf
94fc40f736 Move LEDONPORTE1 define to contiki-conf.h, fixing typo. 2011-08-24 11:35:58 -04:00
David Kopf
09db159876 128rfa1 cca fix, NETSTACK_RADIO.off now returns 0/1 if radio off/on 2011-08-18 14:36:04 -04:00
David Kopf
53737d9a38 Use correct prescale factor 2011-08-18 13:58:20 -04:00
David Kopf
3ea102050b Apply patch of Ivan Delamer for atmega1281 @ 4 MHz 2011-08-17 13:16:46 -04:00
David Kopf
36fa735323 Calculate best prescaler based on F_CPU and CLOCK_CONF_SECONDS. Inspired by patch from Ivan Delamer. 2011-08-17 13:15:26 -04:00
maniacbug
0990896f54 Added an .eu target to upload only the eeprom for AVR cpu. 2011-08-16 14:10:48 -04:00
maniacbug
8f0bb86c02 No strict aliasing for AVR 
AVR build generates numerous aliasing errors.  This -f switch silences them.
 2011-08-16 14:07:06 -04:00
David Kopf
577215deca Use 128rfa1 interrupts instead of timing. 
Generalize DEBUGFLOW macro for use in multiple routines.
 2011-08-15 15:06:38 -04:00
David Kopf
50d1086553 Add changes needed for contikimac 2011-08-13 11:38:38 -04:00
David Kopf
03ab525652 Option for nested rtimer interrupts 2011-08-13 11:35:03 -04:00
David Kopf
cdcb2c4744 CCA measurement was always returning busy 2011-08-06 13:48:52 -04:00
David Kopf
b70d2b3163 Remove duplicate code block 2011-08-05 17:34:38 -04:00
David Kopf
c9b19ce655 Change timer setups for arbitrary CLOCK_CONF_SECOND 
Change raven to 128 ticks and enable 32KHz crystal as default.
 2011-08-05 15:14:35 -04:00
David Kopf
e2ad2acde4 Add stk500 platform and changes suggested by Daniel Willmann 2011-08-03 11:18:55 -04:00
David Kopf
6ec85fe079 Add Iris port of Shinta Hatatani 2011-08-03 10:17:59 -04:00
David Kopf
0bb585fd60 Replace WEBSERVER by AVR_WEBSERVER 2011-07-24 11:43:17 -04:00
HATATANI Shinta
f4740a062a IRIS port is working with uIPv6 2011-07-15 16:36:25 +09:00
David Kopf
6b434a553f Implement SRAM routine of Georg von Zengen 2011-06-21 13:03:58 -04:00
dak664
581d081ffe Don't use RF230_CONF_CCA_THRES if it is not defined. 2011-04-07 17:44:10 -04:00
Oliver Schmidt
f83fb3704b Replaced make-empty-symbols with empty-symbols.[c|h] 
The symbol generation shell scripts cause CRLF issues on Windows/Cygwin again and again. Instead of fixing this yet again I opted to remove the symbol generation script at least for the "no symbols" scenario with two C source files to be copied.
 2011-04-03 13:24:58 +02:00
dak664
a9cbbb4570 Add sneezer mode and tx power change 2011-03-23 18:08:07 -04:00
dak664
5dd7500d0b Add configurable auto cca threshold and implement driver cca call. 
Show smallest rssi in jackdaw menu.
 2011-03-21 11:10:30 -04:00
dak664
d9b5bac953 Refactor with WATCHDOG_CONF_TIMEOUT 2011-03-14 16:14:47 -04:00
dak664
59109b9893 Fix type, diagnostic interrupt code on conditional 2011-03-13 14:08:02 -04:00
dak664
a210e14d78 Add defines for watchdog configuration. 2011-03-13 13:45:12 -04:00
dak664
0b2d3d1615 Refactor clock code with optional interrupt optimizing. 
Put periodic radio calibration on conditional.
 2011-03-13 13:07:32 -04:00
dak664
6a5c8ff1c4 Include file needed for slip rpl-border-router build 2011-03-11 14:10:30 -05:00
dak664
de7bcda99f avrdude and makefile changes suggested by Georg von Zengen 2011-03-08 13:07:00 -05:00
dak664
46297de770 Allocate variable only when mass storage is enabled 2011-02-23 14:06:06 -05:00
dak664
5c098993df Add initial file 2011-02-07 20:30:47 -05:00
dak664
b41e8f384e Add initial atmega128rfa1 file 2011-02-07 20:28:17 -05:00
dak664
f1f32c8e6a Add combined MCU and radio ATmega128rfa1 2011-02-07 13:46:34 -05:00
dak664
90a6d768ea Keep track of sleeptime and display on status web page. 2010-12-23 19:41:07 +00:00
dak664
662b0e064c Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes. 2010-12-22 22:49:16 +00:00
dak664
95982b40ba $make will show avr-size once and only once whether or not a build needs to occur. 2010-12-22 21:13:09 +00:00
dak664
5b8e62ef4f Patches from R Larsson 2010-12-22 20:10:00 +00:00
dak664
013c3ac2f8 Remove contitional on clock updating, it should always be done after a sleep! 2010-12-22 17:09:03 +00:00
dak664
44a2e34005 Resolve TIMER2 conflict between sleep and possible clock usage. 2010-12-22 16:50:30 +00:00
dak664
e3e1e04948 Add FCS comments and text2pcap dump routines of Roger Larsson. 
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
 2010-12-21 04:25:15 +00:00
dak664
e4b0b3dc8c Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will. 2010-12-18 20:51:11 +00:00
dak664
5623ad827b Enable radio off and sleep modes. 2010-12-18 20:49:00 +00:00
dak664
570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
dak664
1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
dak664
c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664
58b7a19803 Hardware/software radio HAL patch from Roger Larsson. 
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
 2010-12-03 20:42:01 +00:00
dak664
21b10e8021 Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schfer 2010-12-03 18:16:56 +00:00
dak664
0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions. 
Minor speed optimizations.
 2010-11-30 19:47:40 +00:00
dak664
dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
dak664
880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
dak664
69ef9d57eb sizeof(*) is sizeof first array element 2010-11-12 17:24:36 +00:00
dak664
9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
dak664
eb0d5c7f45 Add missing includes 2010-11-03 16:55:40 +00:00
dak664
9194b3ac69 Fix error when RS232 not enabled 2010-10-28 19:31:28 +00:00
dak664
ad6712736b Fix Windows XP RNDIS+CDC serial port enumeration 2010-10-28 19:30:14 +00:00
dak664
258e3cc93a Allow simultaneous use of RS232 and USB serial ports 2010-10-27 14:51:20 +00:00
dak664
123e3cae41 Fix compiler warnings 2010-10-23 15:26:46 +00:00
dak664
7be7a34bbb Fix windows COM port enumeration 2010-10-22 19:15:43 +00:00
dak664
774474b7aa Fix compiler warning 2010-10-20 18:57:33 +00:00
adamdunkels
5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro 
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
 2010-10-19 18:29:03 +00:00
dak664
110bc0242e Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum 2010-09-17 21:59:09 +00:00
joxe
0c5390339f updated to new cc2420 spi naming 2010-06-23 10:44:41 +00:00
dak664
898c00b812 Remove usually extra avr-size command 2010-06-22 17:11:38 +00:00
dak664
e45b1c042b TIMER2 uses TIMER2 interrupt vector! 2010-06-22 16:17:24 +00:00
dak664
ab7f3bd8e3 Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen. 2010-06-18 17:30:30 +00:00
dak664
cb45883970 Turn on DEBUGFLOW and software CRC computation 2010-06-18 15:44:53 +00:00
adamdunkels
3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
dak664
972e2f5d4f Add MCU to avr-size command; Remove fuse and signature from .hex; Give bootloader more memory 2010-05-04 14:14:49 +00:00
dak664
0265f09a5c Add RS232 port option to jackdaw USB stick 2010-03-15 18:52:55 +00:00
dak664
01a3912864 Define and use radio STATE_TRANSITION, improve debug messaging 2010-03-02 16:29:59 +00:00
dak664
39e6f6a830 Clean up, functional webserver for further testing of low power protocols 2010-02-28 21:29:19 +00:00
dak664
d61676b8f7 Add RADIOALWAYSON to monitor packet losses with low power protocols 2010-02-28 21:19:33 +00:00
dak664
5debc183a9 Enable radio stats in sensor cgi as default 2010-02-26 21:38:57 +00:00
dak664
844b3a34f7 Platform 0 was matching by default 2010-02-26 21:15:28 +00:00
dak664
195f5939c4 Clean up after testing 2010-02-26 20:51:48 +00:00
dak664
7274f1d1ed Report operating channel with either radio driver 2010-02-23 17:40:09 +00:00
dak664
4ded42db1e Add sniffer and 802 frame reporting 2010-02-23 17:37:51 +00:00
dak664
b4bc7fc3da Make RF230BB the default radio driver 2010-02-23 02:01:46 +00:00
dak664
cbb8621e30 update to new driver format 2010-02-22 22:23:18 +00:00
dak664
658c35df11 remove debug printf 2010-02-22 22:21:15 +00:00
dak664
a83381de30 add rtimers for cxmac 2010-02-18 17:21:44 +00:00
dak664
fee5efb141 additions for cxmac 2010-02-18 17:20:50 +00:00
dak664
98b69e1bff No sniffer yet for RF230BB 2010-02-16 22:55:20 +00:00