osd-contiki/examples/osd/er-rest-example-merkurboard
2014-12-07 17:36:53 +01:00
..
resources update to coap rfc 2014-11-19 22:06:38 +01:00
er-example-client.c update to coap rfc 2014-11-19 22:06:38 +01:00
er-example-server.c update to coap rfc 2014-11-19 22:06:38 +01:00
er-plugtest-server.c update to coap rfc 2014-11-19 22:06:38 +01:00
er-plugtest.h update to coap rfc 2014-11-19 22:06:38 +01:00
flash.sh add merkur board example 2014-11-19 12:06:23 +01:00
flashclient.sh add merkurboard coap client demo 2014-11-19 12:14:24 +01:00
in6addr.patch update to caop 13 2014-11-19 13:23:28 +01:00
Makefile NETSTACK_CONF_WITH_IPV6 2014-12-07 17:36:53 +01:00
project-conf.h use contiki mac 2014-11-20 16:32:22 +01:00
README add merkur board example 2014-11-19 12:06:23 +01:00
README.md update to coap rfc 2014-11-19 22:06:38 +01:00
run.sh Allow changing bootloader_get_mac address 2014-11-19 13:42:35 +01:00
runclient.sh Allow changing bootloader_get_mac address 2014-11-19 13:42:35 +01:00
server-client-native.csc update to coap rfc 2014-11-19 22:06:38 +01:00
server-client.csc update to coap rfc 2014-11-19 22:06:38 +01:00
server-only.csc update to coap rfc 2014-11-19 22:06:38 +01:00

A Quick Introduction to the Erbium (Er) REST Engine

EXAMPLE FILES

  • er-example-server.c: A RESTful server example showing how to use the REST layer to develop server-side applications (at the moment only CoAP is implemented for the REST Engine).
  • er-example-client.c: A CoAP client that polls the /actuators/toggle resource every 10 seconds and cycles through 4 resources on button press (target address is hard-coded).
  • er-plugtest-server.c: The server used for draft compliance testing at ETSI IoT CoAP Plugtests. Erbium (Er) participated in Paris, France, March 2012 and Sophia-Antipolis, France, November 2012 (configured for minimal-net).

PRELIMINARIES

  • Make sure rpl-border-router has the same stack and fits into mote memory: You can disable RDC in border-router project-conf.h (not really required as BR keeps radio turned on). #undef NETSTACK_CONF_RDC #define NETSTACK_CONF_RDC nullrdc_driver
  • Alternatively, you can use the native-border-router together with the slip-radio.
  • For convenience, define the Cooja addresses in /etc/hosts aaaa::0212:7401:0001:0101 cooja1 aaaa::0212:7402:0002:0202 cooja2 ...
  • Get the Copper (Cu) CoAP user-agent from https://addons.mozilla.org/en-US/firefox/addon/copper-270430
  • Optional: Save your target as default target make TARGET=sky savetarget

COOJA HOWTO

###Server only:

make TARGET=cooja server-only.csc

Open new terminal

make connect-router-cooja
  • Start Copper and discover resources at coap://cooja2:5683/
  • Choose "Click button on Sky 2" from the context menu of mote 2 (server) after requesting /test/separate
  • Do the same when observing /test/event

###With client:

make TARGET=cooja server-client.csc

Open new terminal

make connect-router-cooja
  • Wait until red LED toggles on mote 2 (server)
  • Choose "Click button on Sky 3" from the context menu of mote 3 (client) and watch serial output

TMOTES HOWTO

###Server:

  1. Connect two Tmote Skys (check with $ make TARGET=sky sky-motelist)

     make TARGET=sky er-example-server.upload MOTE=2
     make TARGET=sky login MOTE=2
    
  2. Press reset button, get address, abort with Ctrl+C: Line: "Tentative link-local IPv6 address fe80:0000:0000:0000::::"

     cd ../ipv6/rpl-border-router/
     make TARGET=sky border-router.upload MOTE=1
     make connect-router
    

    For a BR tty other than USB0:

     make connect-router-port PORT=X
    
  3. Start Copper and discover resources at:

     coap://[aaaa::____:____:____:____]:5683/
    

Add a client:

  1. Change the hard-coded server address in er-example-client.c to aaaa:::::

  2. Connect a third Tmote Sky

     make TARGET=sky er-example-client.upload MOTE=3
    

MINIMAL-NET HOWTO

With the target minimal-net you can test your CoAP applications without constraints, i.e., with large buffers, debug output, memory protection, etc. The er-plugtest-server is thought for the minimal-net platform, as it requires an 1280-byte IP buffer and 1024-byte blocks.

    make TARGET=minimal-net er-plugtest-server
    sudo ./er-plugtest-server.minimal-net

Open new terminal

    make connect-minimal
  • Start Copper and discover resources at coap://[fdfd::ff:fe00:10]:5683/
  • You can enable the ETSI Plugtest menu in Copper's preferences

Under Windows/Cygwin, WPCAP might need a patch in \usr\include\w32api\in6addr.h:

21,23c21
< #ifdef __INSIDE_CYGWIN__
<     uint32_t __s6_addr32[4];
< #endif
---
>     u_int __s6_addr32[4];
36d33
< #ifdef __INSIDE_CYGWIN__
39d35
< #endif

DETAILS

Erbium implements the Proposed Standard of CoAP. Central features are commented in er-example-server.c. In general, apps/er-coap supports:

  • All draft-18 header options
  • CON Retransmissions (note COAP_MAX_OPEN_TRANSACTIONS)
  • Blockwise Transfers (note REST_MAX_CHUNK_SIZE, see er-plugtest-server.c for Block1 uploads)
  • Separate Responses (no rest_set_pre_handler() required anymore, note coap_separate_accept(), _reject(), and _resume())
  • Resource Discovery
  • Observing Resources (see EVENT_ and PRERIODIC_RESOURCE, note COAP_MAX_OBSERVERS)

TODOs

  • Dedicated Observe buffers
  • Optimize message struct variable access (directly access struct without copying)
  • Observe client
  • Multiple If-Match ETags
  • (Message deduplication)