110 lines
2.3 KiB
C
110 lines
2.3 KiB
C
#include <mc1322x.h>
|
|
#include <board.h>
|
|
#include <uart1.h>
|
|
#include <nvm.h>
|
|
|
|
/* INC = 767; MOD = 9999 works: 115200 @ 24 MHz 16 bit sample */
|
|
#define INC 767
|
|
#define MOD 9999
|
|
|
|
#define READ_ADDR 0x1F000
|
|
#define NBYTES 1024
|
|
|
|
void putc(uint8_t c);
|
|
void puts(uint8_t *s);
|
|
void put_hex(uint8_t x);
|
|
void put_hex16(uint16_t x);
|
|
void put_hex32(uint32_t x);
|
|
|
|
const uint8_t hex[16]={'0','1','2','3','4','5','6','7',
|
|
'8','9','a','b','c','d','e','f'};
|
|
|
|
|
|
|
|
void main(void) {
|
|
nvmType_t type=0;
|
|
nvmErr_t err;
|
|
uint32_t buf[NBYTES/4];
|
|
uint32_t i;
|
|
|
|
/* Restore UART regs. to default */
|
|
/* in case there is still bootloader state leftover */
|
|
|
|
*UART1_CON = 0x0000c800; /* mask interrupts, 16 bit sample --- helps explain the baud rate */
|
|
|
|
/* INC = 767; MOD = 9999 works: 115200 @ 24 MHz 16 bit sample */
|
|
#define INC 767
|
|
#define MOD 9999
|
|
*UART1_BR = INC<<16 | MOD;
|
|
|
|
/* see Section 11.5.1.2 Alternate Modes */
|
|
/* you must enable the peripheral first BEFORE setting the function in GPIO_FUNC_SEL */
|
|
/* From the datasheet: "The peripheral function will control operation of the pad IF */
|
|
/* THE PERIPHERAL IS ENABLED. */
|
|
*UART1_CON = 0x00000003; /* enable receive and transmit */
|
|
*GPIO_FUNC_SEL0 = ( (0x01 << (14*2)) | (0x01 << (15*2)) ); /* set GPIO15-14 to UART (UART1 TX and RX)*/
|
|
|
|
vreg_init();
|
|
|
|
// puts("CRM status: 0x");
|
|
// put_hex32(reg(0x80003018));
|
|
// puts("\n\r");
|
|
|
|
puts("Detecting internal nvm\n\r");
|
|
|
|
err = nvm_detect(gNvmInternalInterface_c, &type);
|
|
|
|
puts("nvm_detect returned: 0x");
|
|
put_hex(err);
|
|
puts(" type is: 0x");
|
|
put_hex32(type);
|
|
puts("\n\r");
|
|
|
|
nvm_setsvar(0);
|
|
|
|
err = nvm_read(gNvmInternalInterface_c, type, (uint8_t *)buf, READ_ADDR, NBYTES);
|
|
puts("nvm_read returned: 0x");
|
|
put_hex(err);
|
|
puts("\n\r");
|
|
|
|
for(i=0; i<NBYTES/4; i++) {
|
|
puts("0x");
|
|
put_hex32(buf[i]);
|
|
puts("\n\r");
|
|
}
|
|
|
|
|
|
while(1) {continue;};
|
|
}
|
|
|
|
void putc(uint8_t c) {
|
|
while(*UT1CON == 31); /* wait for there to be room in the buffer */
|
|
*UART1_DATA = c;
|
|
}
|
|
|
|
void puts(uint8_t *s) {
|
|
while(s && *s!=0) {
|
|
putc(*s++);
|
|
}
|
|
}
|
|
|
|
void put_hex(uint8_t x)
|
|
{
|
|
putc(hex[x >> 4]);
|
|
putc(hex[x & 15]);
|
|
}
|
|
|
|
void put_hex16(uint16_t x)
|
|
{
|
|
put_hex((x >> 8) & 0xFF);
|
|
put_hex((x) & 0xFF);
|
|
}
|
|
|
|
void put_hex32(uint32_t x)
|
|
{
|
|
put_hex((x >> 24) & 0xFF);
|
|
put_hex((x >> 16) & 0xFF);
|
|
put_hex((x >> 8) & 0xFF);
|
|
put_hex((x) & 0xFF);
|
|
}
|