#include <mc1322x.h>
#include <board.h>
#include <uart1.h>
#include <nvm.h>

/* INC = 767; MOD = 9999 works: 115200 @ 24 MHz 16 bit sample */
#define INC 767
#define MOD 9999

#define READ_ADDR 0x1F000
#define NBYTES 1024

void putc(uint8_t c);
void puts(uint8_t *s);
void put_hex(uint8_t x);
void put_hex16(uint16_t x);
void put_hex32(uint32_t x);

const uint8_t hex[16]={'0','1','2','3','4','5','6','7',
		 '8','9','a','b','c','d','e','f'};



void main(void) {
	nvmType_t type=0;
	nvmErr_t err;
	uint32_t buf[NBYTES/4];
	uint32_t i;

	/* Restore UART regs. to default */
	/* in case there is still bootloader state leftover */

	*UART1_CON = 0x0000c800; /* mask interrupts, 16 bit sample --- helps explain the baud rate */

	/* INC = 767; MOD = 9999 works: 115200 @ 24 MHz 16 bit sample */
	#define INC 767
	#define MOD 9999
	*UART1_BR = INC<<16 | MOD; 

	/* see Section 11.5.1.2 Alternate Modes */
	/* you must enable the peripheral first BEFORE setting the function in GPIO_FUNC_SEL */
	/* From the datasheet: "The peripheral function will control operation of the pad IF */
	/* THE PERIPHERAL IS ENABLED. */
	*UART1_CON = 0x00000003; /* enable receive and transmit */
	*GPIO_FUNC_SEL0 = ( (0x01 << (14*2)) | (0x01 << (15*2)) ); /* set GPIO15-14 to UART (UART1 TX and RX)*/

	vreg_init();

//	puts("CRM status: 0x");
//	put_hex32(reg(0x80003018));
//	puts("\n\r");

	puts("Detecting internal nvm\n\r");

	err = nvm_detect(gNvmInternalInterface_c, &type);
		
	puts("nvm_detect returned: 0x");
	put_hex(err);
	puts(" type is: 0x");
	put_hex32(type);
	puts("\n\r");

	nvm_setsvar(0);

	err = nvm_read(gNvmInternalInterface_c, type, (uint8_t *)buf, READ_ADDR, NBYTES);
	puts("nvm_read returned: 0x");
	put_hex(err);
	puts("\n\r");

	for(i=0; i<NBYTES/4; i++) {
		puts("0x");
		put_hex32(buf[i]);
		puts("\n\r");
	}
		

	while(1) {continue;};
}

void putc(uint8_t c) {
	while(*UT1CON == 31); /* wait for there to be room in the buffer */
	*UART1_DATA = c;
}
	
void puts(uint8_t *s) {
	while(s && *s!=0) {
		putc(*s++);
	}
}

void put_hex(uint8_t x)
{
        putc(hex[x >> 4]);
        putc(hex[x & 15]);
}

void put_hex16(uint16_t x)
{
        put_hex((x >> 8) & 0xFF);
        put_hex((x) & 0xFF);
}

void put_hex32(uint32_t x)
{
        put_hex((x >> 24) & 0xFF);
        put_hex((x >> 16) & 0xFF);
        put_hex((x >> 8) & 0xFF);
        put_hex((x) & 0xFF);
}