53 lines
1.5 KiB
Text
53 lines
1.5 KiB
Text
# The barebones radio driver uses the contiki core MAC layer instead
|
|
# of the original glue. Define it here or invoke with $make RF230BB=1.
|
|
# If the latter, $make clean RF230BB=1 is needed to clean the same directory path.
|
|
##RF230BB=1
|
|
|
|
ifdef RF230BB
|
|
CONTIKI_TARGET_DIRS = . rf230bb apps net loader
|
|
else
|
|
CONTIKI_TARGET_DIRS = . rf230 apps net loader
|
|
endif
|
|
|
|
CONTIKI_CORE=contiki-raven-main
|
|
CONTIKI_TARGET_MAIN = ${CONTIKI_CORE}.o
|
|
|
|
CONTIKI_TARGET_SOURCEFILES += rs232.c cfs-eeprom.c eeprom.c random.c \
|
|
mmem.c contiki-raven-main.c contiki-raven-default-init-net.c
|
|
|
|
CONTIKIAVR=$(CONTIKI)/cpu/avr
|
|
CONTIKIBOARD=.
|
|
|
|
CONTIKI_PLAT_DEFS = -DF_CPU=8000000UL -DAUTO_CRC_PADDING=2
|
|
|
|
MCU=atmega1284p
|
|
AVRDUDE_PROGRAMMER=jtag2
|
|
|
|
# For usb devices, you may either use PORT=usb, or (e.g. if you have more than one
|
|
# programmer connected) you can use the following trick to find out the serial number:
|
|
#
|
|
# The example is for an JTAGICE mkII used to program an ATmega128:
|
|
# avrdude -v -P usb:xxxx -c jtag2 -p atmega128
|
|
AVRDUDE_PORT=usb:00B000000D79
|
|
|
|
|
|
# Additional avrdude options
|
|
# Verify off
|
|
AVRDUDE_OPTIONS=-V
|
|
|
|
|
|
include $(CONTIKIAVR)/Makefile.avr
|
|
|
|
ifdef RF230BB
|
|
# Source for AT86RF230 barebones driver using the contiki core MAC
|
|
include $(CONTIKI)/cpu/avr/radio/rf230bb/Makefile.rf230bb
|
|
else
|
|
# Source for AT86RF230
|
|
include $(CONTIKI)/cpu/avr/radio/rf230/Makefile.rf230
|
|
|
|
#Source for Atmel/Cisco 802.15.4'ish MAC
|
|
include $(CONTIKI)/cpu/avr/radio/mac/Makefile.mac
|
|
|
|
#Source for IEEE 802.15.4 manager interface
|
|
include $(CONTIKI)/cpu/avr/radio/ieee-manager/Makefile.ieee-manager
|
|
endif
|