93 lines
3.6 KiB
Markdown
93 lines
3.6 KiB
Markdown
# I2CSoilMoistureSensor
|
|
|
|
Simple Arduino Library for the I2C Soil Moisture Sensor version from Chirp
|
|
(https://github.com/Miceuz/i2c-moisture-sensor) which works really great and is ready to
|
|
use with I2C.
|
|
|
|
## Informations
|
|
More informations at: https://www.tindie.com/products/miceuz/i2c-soil-moisture-sensor/
|
|
|
|
## Version History
|
|
|
|
### v1.1.2
|
|
- changed/fixed handling of negative temperature values (thanks to @krikk)
|
|
|
|
### v1.1.0
|
|
- Added PlatformIO registration files (thanks to @DigitalGrowControl)
|
|
- Added added method changeSensor() to allow to talk to multiple sensors with one instance of the class (thanks to @elzoido)
|
|
- Added methods sleep() and isBusy() which are available beginning with FW 2.3 (thanks to @sekdiy)
|
|
|
|
### v1.0.0
|
|
- Initial Release
|
|
|
|
## Methods
|
|
|
|
### Constructor I2CSoilMoistureSensor
|
|
Optionally set sensor I2C address if different from default
|
|
|
|
|
|
### begin(bool wait)
|
|
Initializes anything ... it does a reset.
|
|
When used without parameter or parameter value is false then a
|
|
waiting time of at least 1 second is expected to give the sensor
|
|
some time to boot up.
|
|
Alternatively use true as parameter and the method waits for a
|
|
second and returns after that.
|
|
|
|
### getCapacitance()
|
|
Return measured Soil Moisture Capacitance Moisture is somewhat linear. More moisture will
|
|
give you higher reading. Normally all sensors give about 200 - 300 as value in free air at
|
|
5V supply.
|
|
|
|
### setAddress(int addr, bool reset)
|
|
Change I2C address of the sensor to the provided address (1..127) and do a reset after it
|
|
in order for the new address to become effective if second parameter is true. Method
|
|
returns true if the new address is set successfully on sensor.
|
|
|
|
### getAddress()
|
|
Return current Address of the Sensor
|
|
|
|
### changeSensor(int addr, bool wait)
|
|
Changes the address (1..127) of the sensor, this instance is trying to read from
|
|
and do a reset after to initialize.
|
|
The second parameter is optional and tells the method to wait for a second to allow
|
|
the sensor to boot up.
|
|
|
|
### startMeasureLight()
|
|
Starts the measurement for the Light sensor. Wait at least 3 seconds till you call method
|
|
getLight to get the Light value. *
|
|
|
|
### getLight(bool wait)
|
|
Read the Light Measurement from the sensor. When used without parameter or parameter value
|
|
is false then a former call to method startMeasureLight and a waiting time of at least 3
|
|
seconds is expected.
|
|
|
|
Alternatively use true as parameter and the method does the call to startMeasureLight and
|
|
a 3 seconds delay automatically and no former call is needed.
|
|
|
|
The measurement gives 65535 in a dark room away form desk lamp - so more light, lower
|
|
reading. When it's dark, it takes longer to measure light, reading the light register
|
|
while measurement is in progress (e.g. wait time too short) will return the previous
|
|
reading. Be aware, light sensor is pretty noisy.
|
|
|
|
### getTemperature()
|
|
Read the Temperature Measurement. Temperature is measured by the thermistor on the tip of
|
|
the sensor. Calculated absolute measurement accuracy is better than 2%. The returned value
|
|
is in degrees Celsius with factor 10, so need to divide by 10 to get real value
|
|
|
|
### sleep()
|
|
Powers down the sensor. Use this function in order to save power inbetween measurements.
|
|
You need to have FW 2.3 from the Sensor to use this method.
|
|
|
|
### isBusy()
|
|
Checks if sensor is busy. Returns true if a measurement is running.
|
|
You need to have FW 2.3 from the Sensor to use this method.
|
|
|
|
### resetSensor()
|
|
Resets sensor. Give the sensor 0.5-1 second time to boot up after reset.
|
|
|
|
### getVersion()
|
|
Get Firmware Version. 0x22 means 2.2
|
|
|
|
## Examples
|
|
You can find examples in the examples folder of this library
|