fros4943
bcc62fbb65
no error dialog for mspsim breakpoints
2010-08-13 09:53:33 +00:00
oliverschmidt
46b83d6ba4
Included Breadbox64 into cc65 binary relaease tools.
...
This additional application results in three disks for the Apple2, two disks for the C64 and one disk for the C128. Therefore the download page can't get along anymore without some JavaScript adjusting the number of downloadable disks depending on the selected machine. With JavaScript turned off access to non-existent disks (i.e. disk 3 for the C64) results in a successfull download of a zero byte sized file - not exactly great but at least a defined behaviour.
2010-08-05 22:50:19 +00:00
dak664
52ff852aa8
Add optional time stamps, delays, and verbosity levels
2010-07-30 20:44:24 +00:00
fros4943
3fc00a8bed
minor fix to allow adding mote interfaces from configuration
2010-07-05 16:48:55 +00:00
fros4943
7712b7e1ed
fixed nogui-argument
2010-07-01 11:14:00 +00:00
adamdunkels
5dc55f0a1b
A quick and dirty service registry daemon hack. The servreg-hack
...
allows a program to register an 8-bit service ID that gets
disseminated to the entire network, as long as a servreg-hack daemon
is running on all neighbors. Other nodes can look up the service ID to
figure out what nodes in the network offer this service.
This is officially labeled as a "hack" so that we don't get too comfy
with it; this hack is not the future of service discovery and
advertisement in Contiki.
2010-06-15 19:00:28 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
fros4943
53e150f240
bugfix: autofiltered data did not always trigger serial port event
2010-06-11 14:12:09 +00:00
fros4943
f3f6a0de24
minor fixes: using split pane, bugfix with canonical paths, added remove button
2010-06-11 09:12:21 +00:00
fros4943
b540408add
added argument for disallowing config relative paths
2010-06-11 09:10:52 +00:00
nifi
351325b7f4
minor cleanup of example (changed to use uiplib to parse IPv6 address)
2010-06-01 13:31:23 +00:00
nvt-se
ef16508613
Fixed problems with boot order and short timeouts in the UDP tests.
2010-06-01 12:23:24 +00:00
joxe
8e619e991d
added support for sending link prefix to RPL border router
2010-05-25 19:05:31 +00:00
joxe
0d3c7edd6c
fixed for new uip_buf
2010-05-24 11:10:51 +00:00
fros4943
2f64d4b3ab
minor addition: sort motes by distance
2010-05-21 08:46:44 +00:00
adamdunkels
052c536db7
Remove the unicast mass-send test since the default number of queuebufs cannot handle 20 concurrent packets
2010-05-20 20:56:36 +00:00
fros4943
106bcc3c66
disable tree icons icon at errors
2010-05-19 17:52:23 +00:00
fros4943
83a1819992
fix: default icons are not always available
2010-05-19 17:38:46 +00:00
fros4943
b229e9aa59
rewrote project dialog, for easier import and management of cooja projects
2010-05-19 17:32:53 +00:00
nifi
16a3f710a4
Minor optimization: only lookup data when needed
2010-05-19 12:58:15 +00:00
fros4943
d6d84a1baa
Added support for attribute colors, as introduced by the VisualHints Contiki project by Joris Borms.
...
Example usage in Contiki:
printf("#A myattr=123;RED\n"); // color myattr attribute
printf("#A color=RED\n"); // color mote
For more examples, see the MoteAttribute documentation.
2010-05-17 14:32:30 +00:00
fros4943
89c2c0c2c4
updated documentation examples
2010-05-17 14:21:51 +00:00
fros4943
5a3a938d1b
added mote attribute visualizer skin: prints mote attributes below each mote
2010-05-17 11:44:16 +00:00
fros4943
e7b0902799
attribute summary method made public
2010-05-17 11:41:22 +00:00
fros4943
66657d9980
updated mspsim.jar that allows reading the current cpu speed
2010-05-17 09:57:31 +00:00
fros4943
8d7f9e2d72
plugin cleanup: removed list of mote interfaces, instead providing links to useful mote plugins
2010-05-17 09:30:27 +00:00
fros4943
f237e16d71
added stub for reading current cpu frequency of emulated motes
2010-05-17 09:29:28 +00:00
nifi
2bfeb01dcd
Replaced borders with separator for a more compact view
2010-05-09 22:50:34 +00:00
joxe
ffdda2259f
made COOJA avoid guessing that the debug printouts are TinyOS if many SLIP chars in stream
2010-05-09 19:45:57 +00:00
nifi
99b2dd8ef7
Added option to connect to server instead of serial port
2010-05-07 12:22:41 +00:00
nifi
d34f278256
jcreate now has its own platform
2010-05-04 10:38:55 +00:00
nvt-se
35282593c0
Updated the test information messages.
2010-05-03 14:56:13 +00:00
nvt-se
c50e4ab4f3
Switched to examples/udp-ipv6 as the code for the test
2010-05-03 14:48:47 +00:00
fros4943
be5656ec2e
set cooja mote random seed depending on simulation random seed
2010-05-02 09:42:52 +00:00
nvt-se
528614e89f
Converted the test to examples/udp-ipv6
2010-04-30 22:16:51 +00:00
nvt-se
15f84a93fa
Converted the test to use examples/udp-ipv6
2010-04-30 16:20:42 +00:00
nvt-se
66d99e00ec
Removed obsolete test for the rimeroute module
2010-04-30 16:04:23 +00:00
fros4943
dc25860caa
added option for mote-specific background coloring in log listener
2010-04-28 09:39:26 +00:00
fros4943
f4976f8800
test info minor fix
2010-04-27 07:15:33 +00:00
fros4943
dcc949e9ba
set serial socket project to default cooja project
2010-04-26 08:21:01 +00:00
fros4943
87dd04fbd8
compiling serial socket project per default
2010-04-26 08:20:11 +00:00
fros4943
c2876b2d25
minor fix: save iconified plugins
2010-04-26 08:19:32 +00:00
fros4943
a430573688
restructured focus menu items, removed debugging output
2010-04-26 08:05:31 +00:00
fros4943
c7ef068f33
improved zoom
2010-04-26 08:00:19 +00:00
joxe
9f00170c59
made tunslip6 take an argument for TAP/TUN
2010-04-16 12:39:46 +00:00
nifi
6d9f904627
Minor cleanup of the radio logger output (packet description).
2010-04-06 23:38:18 +00:00
adamdunkels
d9d3f7b6b5
Bugfix: don't send packets if they are shorter than the link layer header length
2010-04-05 21:05:56 +00:00
adamdunkels
5af47a2f0c
Latest SVN version of MSPsim
2010-04-04 12:31:05 +00:00
joxe
3a286c4f93
improved tunslip6 with support for debug printouts and configuration of IPv6 address
2010-04-02 18:17:20 +00:00
joxe
df4247f0c6
slightly improved timing on CCA/RSSI in the CC2420 emulation
2010-04-01 18:15:05 +00:00
fros4943
2595d31367
updated collect test: bigger network (50), more hops, bugfixed duplicate detection
2010-04-01 12:22:39 +00:00
joxe
02dc04cc6a
improved CC2420 emulation
2010-03-31 20:11:03 +00:00
fros4943
70ab82761b
test now also includes multi-hop pinging (uip_over_mesh), up to 4 hops
2010-03-31 09:35:01 +00:00
oliverschmidt
8dd2b75383
Explicitly set CBM filetypes (PRG, USR).
2010-03-31 06:05:37 +00:00
fros4943
bb7944a201
workaround to survive the bad characters that are sometimes printed by mspsim-based motes + make clean before compilation
2010-03-29 14:14:09 +00:00
fros4943
6460bc1214
old compilation flag WITH_NULLMAC=1 was replaced by netstack's nullmac_driver and nullrdc_Driver
2010-03-29 13:00:15 +00:00
fros4943
f228272cfc
test update: contiki shell prompt was changed
2010-03-29 10:52:22 +00:00
fros4943
d84f84de52
bugfix: using MspMoteTimeEvent:s to ensure that MSPSim's internal clock is correct when button is clicked
2010-03-29 10:18:14 +00:00
fros4943
9316b31d9a
shell command 'ps' was removed from sky-shell.c, instead using 'echo' in test
2010-03-29 09:20:47 +00:00
fros4943
90f174509b
removed previous workaround for already fixed bug in CC2420 CRC
2010-03-26 13:33:40 +00:00
fros4943
ce5d19fefd
moved elf loading and debugging info to the mote type, rather than keeping a separate refence in each mote. this patch reduces both the memory usage of MSPSim-based motes, and the processing time to load them
2010-03-26 12:29:11 +00:00
nifi
e6a8ba41fd
Added consumer thread timeout
2010-03-26 10:11:50 +00:00
fros4943
9a32ec8a31
using update aggregator to avoid event queue flooding in fast simulations, restructured copy to clipboard popup menu
2010-03-26 09:29:04 +00:00
fros4943
c6c0b1b486
help class that simplifies effective handling of high rate events, that otherwise might flood the event queue
2010-03-26 09:27:58 +00:00
fros4943
96979b5fbf
lower simulation thread priority, added timeout on blocking stop simulation method
2010-03-26 09:26:22 +00:00
fros4943
e4c3ac8125
synchronizing access to log list
2010-03-26 09:12:20 +00:00
joxe
1f4ced16eb
fixed ack with DSN CC2420 and improved timer capture
2010-03-25 16:32:00 +00:00
fros4943
20d9f70b09
plugin is updated to support non-visualized simulations
2010-03-25 08:00:15 +00:00
nifi
81dbcf1654
Added option to move motes in Visualizer without confirm dialog by dragging motes with ALT button pressed
2010-03-24 14:22:56 +00:00
fros4943
78069e8853
minor fix: section size was printed in hex, not decimal
2010-03-24 12:29:33 +00:00
nifi
75481f6460
Removed debug output
2010-03-23 12:05:36 +00:00
adamdunkels
8f7e96b06f
Tools for parsing and plotting a power trace from Contiki
2010-03-19 22:01:34 +00:00
fros4943
f2a1604b63
make portable paths method public
2010-03-19 15:04:51 +00:00
fros4943
54db259c32
using EXPORT attribute to automatically copy firmware files in executable JARs
2010-03-19 15:04:05 +00:00
fros4943
4498c39e9e
removed debugging output
2010-03-19 15:03:14 +00:00
fros4943
e83635832a
added simconfig attribute EXPORT that determines how files should be handled when a simulation is exported as an executable JAR
2010-03-19 15:02:26 +00:00
nifi
cba5256ca2
updated to use uip-ds6
2010-03-19 12:58:17 +00:00
fros4943
ae122627de
export project config to allow project plugins to be run from executable jars
2010-03-19 12:34:37 +00:00
fros4943
c71b5b60d0
minor bugfix: cause may be null
2010-03-19 12:34:03 +00:00
fros4943
aa41f9218a
loading user settings before generating executable jar, added debugging output
2010-03-19 11:32:59 +00:00
fros4943
c5c6c3b775
return success (0) after exporting jar, use portable firmware paths in exported config
2010-03-19 09:08:38 +00:00
fros4943
09446c0ee7
added export-jar target, updated help
2010-03-19 08:57:04 +00:00
nifi
ef5a4a6ad7
only add separator if there is more data
2010-03-17 22:44:20 +00:00
nifi
0a579e0c6a
Bug fix: only continue to analyze packet data when ANALYSIS_OK_CONTINUE is returned from previous analyzer.
2010-03-17 14:16:13 +00:00
nifi
60ea81297a
Removed the IPHC flags from the brief packet description (the flags are shown in the verbose description)
2010-03-16 13:10:50 +00:00
fros4943
79f4dd467e
added maximum log message size (1024 bytes) to avoid buffering up on binary serial output
2010-03-15 22:04:26 +00:00
fros4943
2f20d6b108
fixed cc2420's received signal strength indicator to be an average of the last 8 symbols (192us)
2010-03-15 19:22:03 +00:00
fros4943
573e772a32
removed contiki cooja template source, updated configurations
2010-03-15 11:04:37 +00:00
fros4943
ace6cff93f
do not generate source + prepare environment method was updated
2010-03-15 11:04:06 +00:00
fros4943
99fe1faa0a
updated mspsim.jar with improved sht11 support
2010-03-15 08:06:12 +00:00
fros4943
4fa88d2bfd
added method for getting mote interfaces based on class names + getInterfaces() returns a collection instead of a vector
2010-03-14 19:50:34 +00:00
fros4943
4710441bb6
added temperature mote interface for sky motes
2010-03-14 19:45:04 +00:00
fros4943
5877528f3a
added possibility to add radio logger analyzers from cooja projects
2010-03-12 16:02:47 +00:00
joxe
efda8edcc5
fixed UDP uncompression
2010-03-12 14:23:40 +00:00
fros4943
ef35fe6e6e
added experimental visualizer skin that shows the current source code of each mote in the simulation (for emulated mspmotes only)
2010-03-11 22:15:58 +00:00
fros4943
87733c176a
added notes plugin, useful for storing simulation notes in the config
2010-03-11 22:11:10 +00:00
fros4943
b422ef90ad
updated help
2010-03-10 14:49:47 +00:00
fros4943
9e229a35c4
bugfix: bad jar arguments
2010-03-10 14:47:58 +00:00
fros4943
6b68d2e051
added output jar arguments
2010-03-10 14:39:47 +00:00
fros4943
feb0db0b3e
print jar process errors if building archive fails
2010-03-10 14:17:36 +00:00
